Scribd
Upload
16 views

HM-8355 (BL4) : Features

Uploaded by

MohamadMostafavi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

HM-8355 (BL4) : Features

Uploaded by

MohamadMostafavi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HM-8355(BL4)

HM-8355(BL4) is a high density polyethylene with 1-Butene as co monomer with general


purpose grade for large containers. It is a high molar mass, easily processable, high stiffness
strength, good stress cracking resistance and very good molding surface finish grade resin.
Resin Properties Unit Typical value Test Method
Melt Index (21.6) g/10 min 9.5 ISO 1133
Melt Index (5) g/10 min 0.35 ISO 1133
FRR (21.6/5) 27
Density g/cm³ 0.951 ISO 1183
Swell Ratio % 110
Molded Properties Unit value Test Method
Notched Impact @ 23 °C mJ/mm² 10 ISO 179/ 1 eA

Features
• High molovmass, easily processable high stiffness strength, good
stress cvacking vesistance and very good molding sulface finish.

Applications
• Jerry can
General purpose grade for large container
(volume aprox. 1-500 lit)

Additives
 Antioxidant/Process stabilizer
 Lubricant/ acid scavenger
HM-8355(BL4)

Handling and Health Safety


sMolten polymers could be injured skin or eye so safety glasses and appropriate gloves are
suggested to prevent possible thermal injuries. Also, appropriate ventilation is suggested in
working by melt polymer. Accumulation of fines or dust particles that are in this grade is not
suitable because of explosion hazard probability. So adequated filters and grounding exists at
all time are recommended.

Storage
Polyethylene products (in pelletized or powder form) should not be stored in direct sunshine
and/or heat radiation. Ultraviolet cause a change in the material properties. The Storage area
should be dry and preferably don't exceed 50 °C. Under cool, dry, dark conditions Jam
Polymers polyolefin resins are expected to maintain the original material and processing
properties for at least 18 month. . JPC would not responsible about quality diminishing such as
color change, bad smell or ets which caused by bad storage conditions. It is better to process
PE resin within 6 months after delivery.

packaging
Jam Polymers Polyolefin resins are supplied in pellet form packed in 25kg bags. Alternative
packaging modes are available for selected grades.

You might also like