Universiti Teknologi MARA

Faculty of Computer and Mathematical Sciences

ITT400– Introduction to Data Communication and

Networking
GROUP PROJECT: CREATE A NETWORK

***this is the cover page

Topic:

Class:
# Student Name Student ID Signatur
e
1
2
3
4
TOTAL MARKS:
 ITT400 GROUP PROJECT
Total 100 Marks: 30%
Course Outcome (CO):
After completing this project, you should be able to:

▪ Setup a Wired or Wireless network

▪ Demonstrate the process on how: -

1. To setup a simple network using simulation tools - Packet Tracer

i. Create 2 Different LAN
a) LAN 1: 4PC and 1 Laptop
b) LAN 2: 1 FTP Server and 1 Laptop
ii. Each LAN will have its own switch and
iii. All the LANs Switch will connect to Main router
2. By using command prompt: -
i. Check the connection between network devices in the same LAN
ii. Check connection of network devices between different LAN
iii. Check connection from each LAN to the Main Router
3. To share file between PC in a network.
4. To check the IP address and MAC address of devices that connected to your network using
command prompt.
5. To view a list of station that connected in a network using command prompt.
6. Extra mark will be rewarded if you able to:
i. Configure the FTP server and connect to it using the command prompt from the
laptop in its own LAN (Local Area Network).
ii. Create a file and upload the file From Laptop by using command prompt to the
FTP server.

▪ Provide/Name a network monitoring tool that available to monitor your network.

Create a group that consist of 3 or 4 members.

1. Group assignment presentation – 15%

On week 12-13, group members are expected to present their work to class during/tutorial using
appropriate presentation tools and demonstration.
Presentation Schedule during Tutorial
Week 12 Week 13
Group 1 Group 6
Group 2 Group 7
Group 3 Group 8
Group 4 Group 9
Group 5
***Group presentation (10-12 minutes) ***

2. Group assignment report –15%

The report is due on week 12-13 during class presentation. The report must more than 10 pages. You
must submit a report hardcopy to the lecturer. The report will include the following items:
a) Cover page
b) Table of Content: TOC
c) Introduction
● Your introduction should discuss the overview and objectives of project.

● You should also explain on task delegation to each group members.

d) Content/Analysis of Topic
● Step by step on setup a network

● Step by step checking all the connection

● Step by step on process of file sharing in a network or process of sending a message.

● Step by step IP address and MAC address checking

● Step by step view list of station that connected in the network

● Step by step configuring FTP server, create and upload File in FTP server.
e) Conclusion
f) References - APA style (in text-citation, and references)

* Please attach this document (Page 4 & 5) in your report and fill in all the required details*

Report Submission

a) Please submit your report file in PDF Format in Google Classroom.

 ● File Naming: GroupProject_GroupNo.PDF
b) Due submission for Softcopy report in GC on week 11 on 16 June 2024 @ 11.59 PM
c) Due submission for Hardcopy report is during Presentation Day.
****Marks will be deducted for late submission***

ITT400 EVALUATION FORM

TOPIC

Group No

MEMBERS: 1.

Name & Student 2.

3.
ID
4.

CLASS

DATE

Weig Score Marks

ht (S)
(W) (M)
ASSESSMENT CRITERIA (1-10)

1. Presentation: Organization 1
Present in a clear, engaging, charming and appropriate form.

2. Presentation: Delivery skills 1

Use proper language; speak clearly, loudly and at appropriate
pace, effective eye contact, presentable attitude and confident.
3. Presentation: Demonstration 2
Creative, engaging, and detailed presentation of all aspects of
project. Adding extra value.
.4. Presentation: Group collaboration 1

The group members contribute equally and are engaged in the

project.
5. Report: Introduction 1
Provide overview & objectives of assignment. Explain the role of
each group member in completing the task.
6. Report: Analysis of topic
Discuss the topic/issue by stating the technology involved or 3
processes.
 7. Report: Conclusion
Explain on what has been achieved and learned throughout the 1
process of completing the assignment. Include advantages and
limitations/problems working in groups and recommendation for
improvement.

Total Marks (100)

ITT400 GROUP ASSIGNMENT REPORT EVALUATION FORM RUBRIC

N Assessment Excellent (8-10) Good (6-7) Satisfactory (5) Poor (1-4)

o
1 Presentation Presentation is well Presentation is well Presentation is Presentation is
: organized and provides organized; provides disorganized in disorganized;
Organization logical transitions between transitions between spots; some transitions unclear or
topics topics transitions are missing
unclear or missing
2 Presentation Speakers are confident, Speakers are usually Speakers are Speakers are
: Delivery enthusiastic, audible, audible, make frequent sometimes inaudible, inaudible; no eye
skills maintains excellent eye eye-contact with eye-contact is contact; no
contact with audience audience, and use sporadic; inflection is inflection.
throughout, and uses inflection of voice. flat or ineffective. Not confident.
inflection of voice Lacked confidence. Lacked confidence.
effectively
3 Presentation Creative, engaging, and Detailed presentation Presentation covers all Aspects of the project
: detailed presentation of all of all aspects of aspects of project, but are missing;
Demonstrati aspects of project. Makes project; makes explanations are explanations are
on creative and effective use effective use of visual incomplete or unclear; incomplete or unclear;
no use of visual aids.
of visual and audio aids. or audio aids. makes use of visual
aids

4 Presentation Each member contributes All team members Some team members Some team
: Group equally; team members are contribute and are do not contribute members
do not
collaboratio engaged throughout engaged throughout sufficiently or are not contribute and are
n engaged not engaged

5 Report: Provides exceptionally Provides clear context Provides context Poor statement of
Introduction clear context supporting supporting rationale supporting rationale context supporting
rationale for assignment; for assignment; clear for assignment & rationale for
clear objectives. objectives. Clearly objectives. assignment &
Detailed explanation on explained the roles of Adequately objectives. No
the roles of each each member. explained the roles explanation on the
member. of each member. roles of each
member.
6 Report: A detailed discussion on the A clear and accurate A poor explanation on Incorrect explanation
topic/issue by stating the discussion on the the topic/issue by on topic/issue.
Analysis of technology involved or topic/issue by stating stating the technology
topic processes. the technology involved or processes.
involved or
processes.
7 Report: Include detailed findings Include the Include the findings or Lesson learned not
Conclusion and lesson learned from the findings. Some lesson learned from the included in the report.
project. lesson learned project.
from the project.