TUBE FITTINGS

Fittings & Valves –

For Instrumentation, Hydraulic & Pneumatic Applications

Instrumentation Tube Fittings

Instrumentation Valves
General Purpose Valves High
Pressure Valves
Instrumentation Tubing
Instrumentation Accessories
Company Brief
EXCEL METAL & ENGG INDUSTRIES are maintaining high quality products with the brand name
of EMEI/ESSLOK manufacturing various types of instrumentation hardware fittings. With more than
three decades’ experience, we believe in continuously improving our products and services. So that
customers
requirements for safety and performance are satisfied under the brand name of EMEI/ESSLOK.

The reputation we enjoy for the excellence of design, material and workmanship of our product
is the result of hard labor and careful study of the exact requirement of the various industries
in the class of goods in which we are working. EMEI/ESSLOK Valves & Fittings are designed to
withstand high-pressure service and are capable to satisfy various stringent tests like Pressure impulse,
Vibration test, Vacuum test, Temperature cycle test, make & Remake test etc. as per BS 4368 Part IV at
us in house testing facilities. The above tests have been periodically witnessed by various inspection
agencies / consultants like, EIL, DNV, LRIS, BVQI, ONGC, BARC, BHEL, TOYO to name few.

In today modern world, applications are wide and that include Nuclear Power Plants, Refineries,
Petrochemicals, Fertilizers, Thermal Power stations and may more and to meet their specific
requirements, we are always trying to improve quality of the products with quality consciousness.
We shall, at all-time welcome a suggestion from any customer present or prospective, who could
help us in bringing our products to their fullest satisfaction to give EMEI/ESSLOK valves the stamp
of guarantee. EMEI/ESSLOK Fittings and Valves are available in variety of construction material
ranging from SS (low carbon also), C.S. Monel, and Brass material are tested at reputed
Government approved laboratories confirming to ASTM, ANSI, IS etc. standards.

EMEI/ESSLOK Double Ferrule Compression Tube Fittings provide leak proof torque free
seals at all tubing connections. They eliminate hazardous leaks in instrumentation,
process, pneumatic, hydraulic and other applicable tubing systems, which could otherwise
turn out to be costly to the installation.

The basic is a four-piece fitting consisting of the Nut, Back Ferrule, Front Ferrule and Body. When
installed, it becomes a four-piece connection with the addition of the tubing providing a solid leak
free joint. The two ferrules grasp tightly around the tube with no damage to the tube wall.
Exhaustive tests have proven that the tubing will yield before a EMEI/ESSLOK
Compression Tube Fittings joint start leaking.
EMEI/ESSLOK Compression Tube Fittings have the following features:

DESIGN FEATURES:
• Fittings are self-supporting.
• It works on thick and thin wall tubing.
• It resists vibration.
• Have all components made of the same material and hence possess thermal
compatibility and corrosion resistance.
• Resistant to temperature cycling.
• It compensates for the variables encountered in the tube material, dimensions
and metallurgy.

EXCEL METAL & ENGG INDUSTRIES

PERFORMANCE:
• It works on vacuum as well as low and high pressure.
• Seals at low cryogenic temperatures as well as high temperatures rated for the tube.
• Seals consistently over a wide range of temperature cycling.
• Seals repeatedly under make and break condition.
• Resistant to pressure up to the burst point with the tubing without leakage.

ASSEMBLY:
• It uses geometry rather than torque for uniformity of makeup.
• It requires only one and quarter turn after snug tight to complete the joint.
• Does not require disassembly and inspection of ferrule swaging at every make-up.
• Does not require any special tools for assembly.

SERVICE:
EMEI/ESSLOK Compression Tube Fittings are available in wide range of materials,
sizes, connections and configurations.

EMEI/ESSLOK fittings are available in variety of materials depending on the usage.

The most common material of construction is Stainless Steel & Alloy Steel in all grades.

STEP 1:
Insert the tubing into the EMEI/ESSLOK TUBE FITTINGS. Make sure that the tubing rests
firmly on the shoulders of the fitting and that the nut is snug tight, in a position that the
tube does not rotate by hand.

STEP 2:
Before tightening the EMEI/ESSLOK nut, scribe the nut at the 6.00 o’clock position.

STEP 3:
Now while holding the fitting steady with a backup wrench, tighten the nut with one and
quarter turn.

Watch the scribe mark, make one complete revolution and continue to the 9.00 o’clock position.
HIGH PRESSURE APPLICATION, HIGH SAFETY FACTOR SYSTEMS. Due to the variation of
tubing diameters, a common starting point is desirable. Therefore, use a wrench to snug up the nut
until the tubing will not turn (by hand) in the fitting. Now tighten the nut one and quarter turns and
the fitting is ready to hold pressure well above the working pressure of the tubing.

RE-TIGHTENING INSTRUCTIONS:
Connections can be disconnected and re-tightened many, many times and same reliable,
leak-proof seal obtained every tie the reconnection is made.

SELECTION:
Proper selection, handling, installation of tubing when combined with the proportion of
Double Ferrule Compression Tube Fittings are essential reliable tubing system. Although,
2

EXCEL METAL & ENGG INDUSTRIES

is not tubing manufacturer, we feel it is our duty to impress on our customers the vital
importance of careful selection of high quality tubing in order to install safe and leak free
systems. Selection of tube is based on materials, hardness, wall thickness and surface
finish. The ASTM specification for various tubes covers material, hardness and wall
thickness. Finished tubes shall be reasonably straight and have smooth ends free from
burrs. They shall be free from defects and shall have workman like finish.

TUBING HARDNESS:
Tubing must be always softer than the fitting material by using the suggested hardness of
the tubes as explained in tubing specification you will ensure joints which work perfectly.

The most misunderstanding about tubing hardness are in the area of stainless steel tubing
EMEI/ESSLOK Double Ferrule Compression Tube Fittings are made from stainless steel have
been tested successfully with tubing hardness up to HRB 90, the maximum hardness allowed
under ASTM
A213 and ASTM A269. Although such tubing hardness is permissible and EMEI/ESSLOK
Double Ferrule Compression Tube Fittings perform satisfactorily on such tubing they will not
give maximum advantage and performance for tubes of hardness above HRB 80. Hence it is
suggested that when purchasing stainless steel tubes to ASTM A213/A269, you specify that
the hardness of the tube should not exceed HRB 80. Better still we have found that the best
results are obtained where the stainless steel tubing hardness is in the range HRB 70-74.
Such tubing (HRB 70-74) lowers installation costs because it is easily bent and installed.

Tubing installers should be particularly careful the full suggested one and quarter turns after snug
tight be performed to ensure the proper joints. This will give the maximum performance. This is
especially so in the case of harder tubing where higher torques is required. We again repeat that
HRB 80 maximum hardness is suggestion and not a restriction against the use of EMEI/ESSLOK
Double Ferrule Compression Tube Fittings in stainless steel to increase the performance of the
fitting.

Tubing Wall Thickness:

The allowable pressure rating of tubing for the wide range of wall thickness is calculated
from “S” values as specified by ASME Code B31.1. The range of tubing wall thicknesses
varies from 0.028” to 0.083” in the inch OD series. These wall thicknesses are generally
preferred for tube sizes up to 1”.

Tubing for Gas Service:

For maximum safety and the prevention of surface defects in any gas system, it is
recommended that tubing wall thicknesses are not less than those shown in this table:

TUBE OD 1/16” 1/8” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
MIN. WALL THICKNESS 0.028” 0.028” 0.028” 0.035” 0.035” 0.041” 0.052” 0.062” 0.073” 0.083”

Tubing Handling:
Scratches on tube OD are a potential source of problems in leak-tight tubing systems.
Good handling practices can greatly reduce scratches and protect tubing surface finish.

Tubing should never be dragged out of a tubing rack. Particularly in sizes 3/4” and larger,
the weight of the tubing being retrieved is sufficient to gouge the OD if there are any burrs
on the ends of the other tubes in the rack.
3

EXCEL METAL & ENGG INDUSTRIES

Tubing should never be dragged across cement, asphalt, gravel or any other surface,
which could scratch the surface and create potential leak paths.

Sharp tube cutters should be maintained and tube ends should always be deburred. This
allows easier entrance of the tube into the fitting bore and helps to assure that the tubing
will go all the way through the ferrules without damaging the ferrule’s sealing edge.

Stainless Steel Tubing:

Seamless, annealed 304 or 316 Stainless Steel tubing to ASTM A 269 or A 213 or
equivalent is recommended (ERW tubing use is not recommended).4-1 safety factor
considering tensile strength of 75,000 psi at room temperature. Tube hardness should not
exceed HRB 80. The preferable hardness range is HRB 75-80. Tubing should be suitable
for bending and flaring, and should be free of any surface defects and imperfections.

Copper Tubing:
Annealed, soft, seamless copper tubing to ASTM B75 or equivalent. 5-1 safety factor
considering tensile strength of 30,000 psi at room temperature. Maximum hardness of the
tubing is not to exceed HRB 50. Preferred hardness range is HRB 40-45.

Monel 400 Tubing:

Fully annealed Monel 400 seamless tubing confirming ASTM B165 or equivalent and
based on ultimate tensile strength of 70,000 psi and with temperatures 20°C to 90°C.

TUBE OD TOLERANCES:
TUBE OD TOLERANCE (INCH) TOLERANCE (MM)
1/16” – 1/8” OD ± 0.003” ± 0.076 MM
3/16” – 1.1/4” OD ± 0.005” ± 0.127 MM
1.1/2” – 2” OD ± 0.006” ± 0.152 MM

TUBES RECOMMENDED FOR GAS APPLICATION:

GAS APPLICATION TUBING
INCH MM
MIN. WALL MIN. WALL
TUBING OD TUBING OD
THICKNESS THICKNESS
Gases are characterized by small
1/8” 0.028” 3MM 0.8MM molecules, which can escape
1/4” 0.028” 6MM 0.8MM through the smallest leak path. For
gas applications, we recommend
5/16” 0.035” 8MM 1MM
to select tubing with greater wall
3/8” 0.035” 10MM 1MM thickness. This table shows the
1/2” 0.041” 12MM 1.2MM recommended wall thickness for
greater safety and efficiency.
5/8” 0.052” 16MM 1.5MM
3/4” 0.062” 19MM 1.5MM
7/8” 0.073” 22MM 1.8MM
1” 0.083” 25MM 2.2MM
Note: For your safety the system designer and user have the sole responsibility to select products suitable for their speci al
application requirements and to ensure the proper installation, operation and maintenance of the products. Please
consider application details, material compatibility and product ratings when making your selection. Improper selection or
use of products can cause property damage or personal injury.

EXCEL METAL & ENGG INDUSTRIES

THREAD SPECIFICATION:
connectors have one or more tubing end connections and others with male or female pipe
threads. There are varieties of pipe threads for which Double Ferrule Double Compression Tube
Fittings available. The most popular thread connections are the American National Pipe Thread
(NPT), British Standard Pipe Thread (BSP) and metric threads. These standards belong
to individual countries as well as ISO where they have been codified. All Double Ferrule
Double Compression Tube Fittings

Pipe threads or stub end threads confirming to the specifications as detailed below:

• American National Pipe Thread (NPT): Reference Specification ANSI B1.20.1.

• ISO Parallel Pipe Thread (British Standard Pipe Thread): Reference Specification BS
2779, ISO 228/1, DIN 259, JIS B 2020, IS 2643.
• ISO Tapered Pipe Thread (British Standard Pipe Taper Thread): Reference
Specification BS 21, ISO 7/1, DIN 2999, JIS B0203, IS 554.
• United National Pipe Thread: Reference Specification ANSI B1.1.

TECHNICAL SPECIFICATION TO WHICH FITTINGS PERFORM:

There are no standards available for Double Ferrule Compression Fittings.

The working pressure are restricted by the maximum working pressure of the tubes to be
used with fittings design as such that tubes will burst before the breakage of joints.
Accordingly, the working pressure outlined in the section entitled ‘Allowable Pressure
Rating’ for Tubing will prevail as working pressure for these fittings.

The maximum working pressure of these fittings is also restricted by pressure rating for
pipe end connection adopted.

There are no standard specifications available for the type test requirements for Double Ferrule
Compression Fittings. The attempt has been made by the British Standards Institute to formulate
BS 4368 Part IV: 1984. A similar standard has been formulated by Indian Standard Institute vide IS
10103:1982. Both these standards refer to Single Ferrule Fittings. They can however be adopted
for Double Ferrule as well. The standard covers the basic type test requirement for fittings
assembled in a standard test assembly as outlined in the standards. The tests are as follows:

PROOF TEST:
Test assemblies to be subjected to a pressure of 1.5 times the maximum working
pressure of the fittings applied at the rate of 200 Kg/Cm² per minute and maintained at
final pressure for five minutes without leak.

DISMANTLING AND REASSEMBLY TEST:

Test assemblies successfully completing the proof test above are disassembled twenty-
five times after which they must pass the Proof Pressure Test.

MINIMUM HYDRAULIC BURST PRESSURE TEST:

Apply hydraulic pressure to the test assembly up to maximum of four times the working pressure at
the rate not exceeding 200 Kg/Cm² per minute and maintain it for five minutes without leak.

EXCEL METAL & ENGG INDUSTRIES

MINIMUM STATIC VACUUM TEST:
Test assemblies satisfactorily proof tested are subjected to negative pressure up to 700
Mbar and then isolated from the vacuum pump. The assembly must maintain the vacuum
for fifteen minutes. The assemblies are suitably decreased before the test and total
exhausted volume should not exceed 20% of the total assembly volume. This test can be
given at two temperatures for cryogenic application.

HYDRAULIC IMPLUSE VIBRATION TEST:

Test assemblies suitably proof tested are connected to a hydraulic pressure impulse and vibration
test and subjected simultaneously to pressure impulses at 30 to 100 cycles per minute and
vibration in two mutually perpendicular planes at 1300 to 2820 cycles per minute for a minimum of
5 x 106 pressure impulses and 20 x 105 vibration cycles per minute. The method of choosing the
displacement and the cycles is outlined in the Standard mentioned. The only permissible
retightening is allowed after the first 1000 pressures impulse to allow for bedding in.

The above tests have been specified in Standard BS 4368 Part IV: 1984. Some customers working
with high temperatures have specified a temperature cycling test which requires test assemblies to
be subjected to suitable temperature cycles and then subjected to the Proof Pressure Test without
leakage. Other customers working with gases have specified Helium Leak test with leak rates not
exceeding 2 x 10-6 STD.CC/SEC. we undertakes all these tests at our recognized laboratories to
satisfy all customer requirements.

GAS COMPATABILITY:
Best Practice requires that you always verify the gas compatibility of any gas handling
equipment before installation and operation. The chart below helps you to verify the right
material for your gas type.

KEY TO GAS COMPATABILITY:

Locate your gas type in the below chart and see the gas compatibility of each standard
material type. Only select materials that are compatible with your gas type.

GAS COMPATIBILITY WITH MATERIALS

GAS BRASS SS 316L PTFE
Acetylene C2H 2 OK OK OK
Ammonia NH3 OK OK
Argon Ar OK OK OK
CH
Butane 4 10 OK OK OK
Carbon Dioxide CO 2 OK OK OK
Carbon Monoxide CO OK OK OK
Ethane C2H 6 OK OK OK
Ethylene C2H 4 OK OK OK
Helium He OK OK
Hydrogen H2 OK OK
Hydrogen Sulphide H2S OK OK
Krypton Kr OK OK OK
Methane CH4 OK OK OK
Nitric Oxide NO OK
Nitrogen N2 OK OK OK
Nitrous Oxide NO 2 OK
Oxygen O2 OK
Propane C3H 8 OK OK OK
Silane SiH 4 OK OK
Sulphur Dioxide SO2 OK OK

EXCEL METAL & ENGG INUSTRIES

 TUBE FITTINGS
Description
Double Ferrule Compression Tube Fittings provide leak proof torque free seals at all tubing connections.
They eliminate hazardous leaks in instrumentation, process, pneumatic, hydraulic and other applicable
tubing systems, which in could otherwise turn out to be costly to the installation.
The basic is a four-piece fitting consisting of the Nut, Back Ferrule, Front Ferrule and Body. When installed it becomes
a four-piece connection with addition of the tubing providing a solid leak free joint. The two ferrules grasp tightly
around the tube with no damage to the tube wall. Exhaustive tests have been proven that tubing will yield before
Compression Tube Fitting joints start leaking.

Features
• Fittings are designed to withstand high pressure and severe operating conditions.
• They meet the requirements of the industry such as Proof Test, Dismantling and Reassembly
Test, Burst Pressure Test, Vacuum Test and Vibration Test.
• Fittings are easy to be assembled; only an open wrench is required.
• Variety of ends and patterns.
• Various types of Plating used to avoid galling.
• PMI (Positive Material Identification) Test available on request.
• Pressure Temperature Rating Up to 400 Kg/Cm².
• Standard Followed: BS 4368 Part IV.
• Note: When assembling tapered pipe thread, it is mandatory to use thread sealant ‘EXCEL fittings recommends use of TEFLON/PTFE tapes due to
ease of its applications.

ETAL & ENGG INDUSTRIES

TUBE FITTINGS

Ferrules Product Drawing

Spare part for a double ferrule compression tube fitting. (Special requirements available on request)

Product Dimension Table

INCH METRIC
F F
Part No. (T) Tube Size Part No. (T) Tube Size
F2 1 / 8" 3.25 / 3.30 F3M 3MM 3.12 / 3.20
F4 1 / 4" 6.47 / 6.54 F6M 6MM 6.12 / 6.20
F5 5 / 16" 8.05 / 8.13 F8M 8MM 8.12 / 8.20
F6 3 / 8" 9.63 / 9.72 F10M 10MM 10.12 / 10.20
F8 1 / 2" 12.82 / 12.90 F12M 12MM 12.12 / 12.20
F10 5 / 8" 16.00 / 16.08 F16M 16MM 16.12 / 16.20
F12 3 / 4" 19.17 / 19.25 F19M 19MM 19.12 / 19.20
F14 7 / 8" 22.35 / 22.43 F22M 22MM 22.12 / 22.20
F16 1" 25.52 / 25.60 F25M 25MM 25.12 / 25.20
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Nuts Product Drawing

Spare part for a double ferrule compression tube fitting. (Special requirements available on request)

Product Dimension Table

INCH METRIC
G H G H
Part No. (T) Tube Size Part No. (T) Tube Size
N2 1 / 8" 11.1 11.0 N3M 3MM 11.1 11.0
N4 1 / 4" 14.2 12.7 N6M 6MM 14.2 12.7
N5 5 / 16" 15.8 13.5 N8M 8MM 15.8 13.5
N6 3 / 8" 17.5 14.5 N10M 10MM 19.0 14.5
N8 1 / 2" 22.2 17.5 N12M 12MM 22.2 17.5
N10 5 / 8" 25.4 17.5 N16M 16MM 25.4 17.5
N12 3 / 4" 28.5 17.5 N19M 19MM 28.5 17.5
N14 7 / 8" 32.0 17.5 N22M 22MM 32.0 17.5
N16 1" 38.0 20.7 N25M 25MM 38.0 20.7
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Tube Plug Product Drawing

To seal an apparatus with a compression fitting end. (Special requirements available on request)

Product Dimension Table

INCH METRIC

Part No. (T) Tube Size G H Part No. (T) Tube Size G H
TP2T 1 / 8" 11.1 11.0 TP3M 3MM 11.1 11.0
TP4T 1 / 4" 14.2 12.7 TP6M 6MM 14.2 12.7
TP6T 3 / 8" 17.5 14.5 TP10M 10MM 19.0 14.5
TP8T 1 / 2" 22.2 17.5 TP12M 12MM 22.2 17.5
TP12T 3 / 4" 28.5 17.5 TP19M 19MM 28.5 17.5
TP16T 1" 38.0 20.7 TP25M 25MM 38.0 20.7
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Tube Cap Product Drawing

Compression fitting to a cap. (Special requirements available on request)

Product Dimension Table

INCH METRIC

Part No. (T) Tube Size F G D E H Part No. (T) Tube Size F G D E H
TC2T 1 / 8" 11.1 11.1 11.0 2.4 13.5 TC3M 3MM 11.1 11.1 11.0 2.4 13.5
TC4T 1 / 4" 14.2 14.2 12.7 4.8 16.0 TC6M 6MM 14.2 14.2 12.7 4.8 16.0
TC5T 5 / 16" 15.8 15.8 13.5 6.4 17.5 TC8M 8MM 15.8 15.8 13.5 6.4 17.5
TC6T 3 / 8" 17.5 17.5 14.5 7.1 18.3 TC10M 10MM 19.0 19.0 14.5 8.0 18.3
TC8T 1 / 2" 22.2 22.2 17.5 10.3 19.0 TC12M 12MM 22.2 22.2 17.5 10.3 19.0
TC12T 3 / 4" 28.5 28.5 17.5 15.8 21.3 TC19M 19MM 28.5 28.5 17.5 15.8 21.3
TC16T 1" 35.0 38.0 20.7 22.0 26.2 TC25M 25MM 35.0 38.0 20.7 22.0 26.2
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Tube Union Product Drawing

To connect tubes of same dimension in a straight configuration. (Special requirements available on request)

Product Dimension Table

INCH METRIC

Part No. (T) Tube Size F G D E H Part No. (T) Tube Size F G D E H
U2T 1 / 8" 11.1 11.1 11.0 2.4 22.4 U3M 3MM 11.1 11.1 11.0 2.4 22.4
U4T 1 / 4" 14.2 14.2 12.7 4.8 26.2 U6M 6MM 14.2 14.2 12.7 4.8 26.2
U5T 5 / 16" 15.8 15.8 13.5 6.4 28.2 U8M 8MM 15.8 15.8 13.5 6.4 28.2
U6T 3 / 8" 17.5 17.5 14.5 7.1 30.2 U10M 10MM 19.0 19.0 14.5 8.0 30.2
U8T 1 / 2" 22.2 22.2 17.5 10.3 31.0 U12M 12MM 22.2 22.2 17.5 10.3 31.0
U12T 3 / 4" 28.5 28.5 17.5 15.8 33.3 U19M 19MM 28.5 28.5 17.5 15.8 33.3
U16T 1" 35.0 38.0 20.7 22.0 40.4 U25M 25MM 35.0 38.0 20.7 22.0 40.4
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Bulk Head Union Product Drawing

To join tubes of same dimension through a wall or panel. (Special requirements available on request)

Product Dimension Table

INCH METRIC

Part No. (T) Tube Size F G D E H Part No. (T) Tube Size F G D E H
BHU2T 1 / 8" 14.2 11.1 11.0 2.4 38.1 BHU3M 3MM 14.2 11.1 11.0 2.4 38.1
BHU4T 1 / 4" 15.9 14.2 12.7 4.8 42.9 BHU6M 6MM 15.9 14.2 12.7 4.8 42.9
BHU5T 5 / 16" 17.5 15.9 13.5 6.4 46.0 BHU8M 8MM 17.5 15.9 13.5 6.4 46.0
BHU6T 3 / 8" 19.0 17.5 14.5 7.1 48.5 BHU10M 10MM 20.5 19.0 14.5 8.0 48.5
BHU8T 1 / 2" 25.4 22.2 17.5 10.3 50.8 BHU12M 12MM 25.4 22.2 17.5 10.3 50.8
BHU12T 3 / 4" 32.0 28.5 17.5 15.8 58.7 BHU19M 19MM 32.0 28.5 17.5 15.8 58.7
BHU16T 1" 41.0 38.0 20.7 22.0 71.4 BHU25M 25MM 41.0 38.0 20.7 22.0 71.4
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

10

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Reducing Union Product Drawing

To connect tubes of different dimensions. (Special requirements available on request)

Product Dimension Table

INCH

Part No. (T) Tube Size (T1) Tube Size1 F G G1 D D1 E H

RU4/2T 1 / 4" 1 / 8" 14.2 14.2 11.1 12.7 11.0 2.4 24.6
RU5/4T 5 / 16" 1 / 4" 15.9 15.9 14.2 13.5 12.7 4.8 27.4
RU6/5T 3 / 8" 5 / 16" 17.5 17.5 15.9 14.5 13.5 6.4 30.0
RU8/4T 1 / 2" 1 / 4" 22.2 22.2 14.2 17.5 12.7 4.8 29.5
RU8/5T 1 / 2" 5 / 16" 22.2 22.2 15.9 17.5 13.5 6.4 30.2
RU8/6T 1 / 2" 3 / 8" 22.2 22.2 17.5 17.5 14.5 7.1 31.0
RU12/8T 3 / 4" 1 / 2" 28.5 28.5 22.2 17.5 17.5 10.3 33.3
RU16/8T 1" 1 / 2" 35.0 38.0 22.2 20.7 17.5 10.3 38.0
RU16/12T 1" 3 / 4" 35.0 38.0 28.5 20.7 17.5 15.8 38.0
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

METRIC

Part No. (T) Tube Size (T1) Tube Size1 F G G1 D D1 E H

RU6M3M 6MM 3MM 14.2 14.2 11.1 12.7 11.0 2.4 24.6
RU8M6M 8MM 6MM 15.9 15.9 14.2 13.5 12.7 4.8 27.4
RU10M8M 10MM 8MM 19.0 19.0 15.9 14.5 13.5 6.4 30.0
RU12M6M 12MM 6MM 22.2 22.2 14.2 17.5 12.7 4.8 29.5
RU12M8M 12MM 8MM 22.2 22.2 15.9 17.5 13.5 6.4 30.2
RU12M10M 12MM 10MM 22.2 22.2 19.0 17.5 14.5 8.0 31.0
RU19M12M 19MM 12MM 28.5 28.5 22.2 17.5 17.5 10.3 33.3
RU25M12M 25MM 12MM 35.0 38.0 22.2 20.7 17.5 10.3 38.0
RO25M19M 25MM 19MM 35.0 38.0 28.5 20.7 17.5 15.8 38.0
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

11

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Union Tee Product Drawing

To connect tubes of same dimension in a ‘T’ configuration. (Special requirements available on request)

Product Dimension Table

INCH METRIC

Part No. (T) Tube Size F G D E H Part No. (T) Tube Size F G D E H
UT2T 1 / 8" 11.1 11.1 11.0 2.4 15.8 UT3M 3MM 11.1 11.1 11.0 2.4 15.8
UT4T 1 / 4" 12.5 14.2 12.7 4.8 19.6 UT6M 6MM 12.5 14.2 12.7 4.8 19.6
UT6T 3 / 8" 17.5 17.5 14.5 7.1 23.2 UT10M 10MM 19.0 19.0 14.5 8.0 23.2
UT8T 1 / 2" 20.5 22.2 17.5 10.3 24.9 UT12M 12MM 20.5 22.2 17.5 10.3 24.9
UT12T 3 / 4" 27.0 28.5 17.5 15.8 29.7 UT19M 19MM 27.0 28.5 17.5 15.8 29.7
UT16T 1" 35.0 38.0 20.7 22.2 36.8 UT25M 25MM 35.0 38.0 20.7 22.2 36.8
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Union Elbow Product Drawing

To connect tubes of same dimension at a 90° angle. (Special requirements available on request)

Product Dimension Table

INCH METRIC

Part No. (T) Tube Size F G D E H Part No. (T) Tube Size F G D E H
UE2T 1 / 8" 11.1 11.1 11.0 2.4 15.8 UE3M 3MM 11.1 11.1 11.0 2.4 15.8
UE4T 1 / 4" 12.5 14.2 12.7 4.8 19.6 UE6M 6MM 12.5 14.2 12.7 4.8 19.6
UE6T 3 / 8" 17.5 17.5 14.5 7.1 23.2 UE10M 10MM 19.0 19.0 14.5 8.0 23.2
UE8T 1 / 2" 20.5 22.2 17.5 10.3 24.9 UE12M 12MM 20.5 22.2 17.5 10.3 24.9
UE12T 3 / 4" 27.0 28.5 17.5 15.8 29.7 UE19M 19MM 27.0 28.5 17.5 15.8 29.7
UE16T 1" 35.0 38.0 20.7 22.2 36.8 UE25M 25MM 35.0 38.0 20.7 22.2 36.8
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

12

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Male Connectors Product Drawing

To connect tubes to female tapered threaded apparatus. (Special requirements available on request)

Product Dimension Table

INCH METRIC
F G B D E H F G B D E H
Part No. P (NPT) Tube Size Part No. P (NPT) Tube Size
MC2N2T 1 / 8" 1 / 8" 11.1 11.1 9.5 11.0 2.4 23.9 MC2N3M 1 / 8" 3MM 11.1 11.1 9.5 11.0 2.4 23.9
MC2N4T 1 / 8" 1 / 4" 14.2 14.2 9.5 12.7 4.8 25.5 MC2N6M 1 / 8" 6MM 14.2 14.2 9.5 12.7 4.8 25.5
MC2N6T 1 / 8" 3 / 8" 17.5 17.5 9.5 14.5 4.8 27.2 MC2N10M 1 / 8" 10MM 19.0 19.0 9.5 14.5 4.8 27.2
MC4N2T 1 / 4" 1 / 8" 14.2 11.1 14.2 11.0 2.4 28.5 MC4N3M 1 / 4" 3MM 14.2 11.1 14.2 11.0 2.4 28.5
MC4N4T 1 / 4" 1 / 4" 14.2 14.2 14.2 12.7 4.8 30.1 MC4N6M 1 / 4" 6MM 14.2 14.2 14.2 12.7 4.8 30.1
MC4N6T 1 / 4" 3 / 8" 17.5 17.5 14.2 14.5 7.1 31.5 MC4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 7.1 31.5
MC4N8T 1 / 4" 1 / 2" 22.2 22.2 14.2 17.5 7.1 33.3 MC4N12M 1 / 4" 12MM 22.2 22.2 14.2 17.5 7.1 33.3
MC6N4T 3 / 8" 1 / 4" 17.5 14.2 14.2 12.7 4.8 31.0 MC6N6M 3 / 8" 6MM 17.5 14.2 14.2 12.7 4.8 31.0
MC6N6T 3 / 8" 3 / 8" 17.5 17.5 14.2 14.5 7.1 32.5 MC6N10M 3 / 8" 10MM 19.0 19.0 14.2 14.5 8.0 32.5
MC6N8T 3 / 8" 1 / 2" 22.2 22.2 14.2 17.5 9.5 33.3 MC6N12M 3 / 8" 12MM 22.2 22.2 14.2 17.5 9.5 33.3
MC6N12T 3 / 8" 3 / 4" 28.5 28.5 14.2 17.5 9.5 34.0 MC6N19M 3 / 8" 19MM 28.5 28.5 14.2 17.5 9.5 34.0
MC8N4T 1 / 2" 1 / 4" 22.2 14.2 19.0 12.7 4.8 36.5 MC8N6M 1 / 2" 6MM 22.2 14.2 19.0 12.7 4.8 36.5
MC8N6T 1 / 2" 3 / 8" 22.2 17.5 19.0 14.5 7.1 38.1 MC8N10M 1 / 2" 10MM 22.2 19.0 19.0 14.5 8.0 38.1
MC8N8T 1 / 2" 1 / 2" 22.2 22.2 19.0 17.5 10.3 38.1 MC8N12M 1 / 2" 12MM 22.2 22.2 19.0 17.5 10.3 38.1
MC8N12T 1 / 2" 3 / 4" 28.5 28.5 19.0 17.5 11.9 38.9 MC8N19M 1 / 2" 19MM 28.5 28.5 19.0 17.5 11.9 38.9
MC8N16T 1 / 2" 1" 35.0 38.0 19.0 20.7 11.9 47.0 MC8N25M 1 / 2" 25MM 35.0 38.0 19.0 20.7 11.9 47.0
MC12N6T 3 / 4" 3 / 8" 28.5 17.5 19.0 14.5 7.1 33.3 MC12N10M 3 / 4" 10MM 28.5 19.0 19.0 14.5 8.0 33.3
MC12N8T 3 / 4" 1 / 2" 28.5 22.2 19.0 17.5 10.3 40.4 MC12N12M 3 / 4" 12MM 28.5 22.2 19.0 17.5 10.3 40.4
MC12N12T 3 / 4" 3 / 4" 28.5 28.5 19.0 17.5 15.8 40.4 MC12N19M 3 / 4" 19MM 28.5 28.5 19.0 17.5 15.8 40.4
MC12N16T 3 / 4" 1" 35.0 38.0 19.0 20.7 19.0 47.0 MC12N25M 3 / 4" 25MM 35.0 38.0 19.0 20.7 19.0 47.0
MC16N8T 1" 1 / 2" 35.0 22.2 24.0 17.5 10.3 45.2 MC16N12M 1" 12MM 35.0 22.2 24.0 17.5 10.3 45.2
MC16N12T 1" 3 / 4" 35.0 28.5 24.0 17.5 15.8 45.2 MC16N19M 1" 19MM 35.0 28.5 24.0 17.5 15.8 45.2
MC16N16T 1" 1" 35.0 38.0 24.0 20.7 22.0 50.0 MC16N25M 1" 25MM 35.0 38.0 24.0 20.7 22.0 50.0
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

13

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS
Union Cross Product Drawing

To connect tubes of same dimensions in a cross/perpendicular configuration. (Special requirements available on request)

Product Dimension Table

INCH METRIC

Part No. (T) Tube Size F G D E H Part No. (T) Tube Size F G D E H
UC2T 1 / 8" 11.1 11.1 11.0 2.4 15.8 UC3M 3MM 11.1 11.1 11.0 2.4 15.8
UC4T 1 / 4" 12.5 14.2 12.7 4.8 19.6 UC6M 6MM 12.5 14.2 12.7 4.8 19.6
UC6T 3 / 8" 17.5 17.5 14.5 7.1 23.2 UC10M 10MM 19.0 19.0 14.5 8.0 23.2
UC8T 1 / 2" 20.5 22.2 17.5 10.3 24.9 UC12M 12MM 20.5 22.2 17.5 10.3 24.9
UC12T 3 / 4" 27.0 28.5 17.5 15.8 29.7 UC19M 19MM 27.0 28.5 17.5 15.8 29.7
UC16T 1" 35.0 38.0 20.7 22.2 36.8 UC25M 25MM 35.0 38.0 20.7 22.2 36.8
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Bulkhead Male Connector Product Drawing

To connect to a female tapered threaded apparatus through a wall or panel. (Special requirements available on request)

Product Dimension Table

INCH METRIC
(P) (T) Tube (P) (T) Tube
Part No. F G B D E H Part No. F G B D E H
NPT Size NPT Size
MBH2N2T 1 / 8" 1 / 8" 14.2 11.1 9.5 11.0 2.4 39.9 MBH2N3M 1 / 8" 3MM 14.2 11.1 9.5 11.0 2.4 39.9
MBH2N4T 1 / 8" 1 / 4" 15.9 14.2 9.5 12.7 4.8 42.2 MBH2N6M 1 / 8" 6MM 15.9 14.2 9.5 12.7 4.8 42.2
MBH4N4T 1 / 4" 1 / 4" 15.9 14.2 14.2 12.7 4.8 46.7 MBH4N6M 1 / 4" 6MM 15.9 14.2 14.2 12.7 4.8 46.7
MBH4N6T 1 / 4" 3 / 8" 19.0 17.5 14.2 14.5 7.1 46.7 MBH4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 7.1 46.7
MBH6N6T 3 / 8" 3 / 8" 19.0 17.5 14.2 14.5 7.1 50.0 MBH6N10M 3 / 8" 10MM 19.0 19.0 14.2 14.5 8.0 50.0
MBH6N8T 3 / 8" 1 / 2" 25.4 22.2 14.2 17.5 9.5 53.1 MBH6N12M 3 / 8" 12MM 25.4 22.2 14.2 17.5 9.5 53.1
MBH8N8T 1 / 2" 1 / 2" 25.4 22.2 19.0 17.5 10.3 58.7 MBH8N12M 1 / 2" 12MM 25.4 22.2 19.0 17.5 10.3 58.7
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

14

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS
Male Run Tee Product Drawing

To connect a female tapered threaded apparatus to a gas line at a 90° elbow. (Special requirements available on request)

Product Dimension Table

INCH INCH
(P) (T) Tube (P) (T) Tube
Part No. NPT Size F G B D E H HY Part No. NPT Size F G B D E H HY
MRT2N2T 1 / 8" 1 / 8" 11.1 11.1 9.5 11.0 2.4 17.0 17.8 MRT2N3M 1 / 8" 3MM 11.1 11.1 9.5 11.0 2.4 17.0 17.8
MRT2N4T 1 / 8" 1 / 4" 12.5 14.2 9.5 12.7 4.8 19.6 18.8 MRT2N6M 1 / 8" 6MM 12.5 14.2 9.5 12.7 4.8 19.6 18.8
MRT4N2T 1 / 4" 1 / 8" 14.2 11.1 14.2 11.0 2.4 18.3 23.4 MRT4N3M 1 / 4" 3MM 14.2 11.1 14.2 11.0 2.4 18.3 23.4
MRT4N4T 1 / 4" 1 / 4" 14.2 14.2 14.2 12.7 4.8 19.6 23.4 MRT4N6M 1 / 4" 6MM 14.2 14.2 14.2 12.7 4.8 19.6 23.4
MRT4N6T 1 / 4" 3 / 8" 17.5 17.5 14.2 14.5 7.1 23.1 25.4 MRT4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 8.0 23.1 25.4
MRT6N6T 3 / 8" 3 / 8" 17.5 17.5 14.2 14.5 7.1 23.1 28.2 MRT6N10M 3 / 8" 10MM 19.0 19.0 14.2 14.5 8.0 23.1 28.2
MRT6N8T 3 / 8" 1 / 2" 20.5 22.2 14.2 17.5 9.5 24.9 28.2 MRT6N12M 3 / 8" 12MM 20.5 22.2 14.2 17.5 9.5 24.9 28.2
MRT8N8T 1 / 2" 1 / 2" 22.2 22.2 19.0 17.5 10.3 24.9 33.0 MRT8N12M 1 / 2" 12MM 22.2 22.2 19.0 17.5 10.3 24.9 33.0
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Bulkhead Female Connector Product Drawing

To connect to a male tapered threaded apparatus or pipe through a wall or panel. (Special requirements available on request)

Product Dimension Table

INCH INCH
(P) (T) Tube (P) (T) Tube
Part No. NPT Size F F1 G B D E H Part No. NPT Size F F1 G B D E H
FBH2N2T 1 / 8" 1 / 8" 14.2 14.2 11.1 9.5 11.0 2.4 38.0 FBH2N3M 1 / 8" 3MM 14.2 14.2 11.1 9.5 11.0 2.4 38.0
FBH2N4T 1 / 8" 1 / 4" 15.9 15.9 14.2 9.5 12.7 4.8 39.6 FBH2N6M 1 / 8" 6MM 15.9 15.9 14.2 9.5 12.7 4.8 39.6
FBH4N4T 1 / 4" 1 / 4" 19.0 15.9 14.2 14.2 12.7 4.8 44.5 FBH4N6M 1 / 4" 6MM 19.0 15.9 14.2 14.2 12.7 4.8 44.5
FBH4N6T 1 / 4" 3 / 8" 19.0 19.0 17.5 14.2 14.5 7.1 47.8 FBH4N10M 1 / 4" 10MM 19.0 19.0 19.0 14.2 14.5 8.0 47.8
FBH6N6T 3 / 8" 3 / 8" 22.2 19.0 17.5 14.2 14.5 7.1 50.0 FBH6N10M 3 / 8" 10MM 22.2 19.0 19.0 14.2 14.5 8.0 50.0
FBH6N8T 3 / 8" 1 / 2" 25.4 25.4 22.2 14.2 17.5 10.3 54.5 FBH6N12M 3 / 8" 12MM 25.4 25.4 22.2 14.2 17.5 10.3 54.5
FBH8N8T 1 / 2" 1 / 2" 28.5 25.4 22.2 19.0 17.5 10.3 57.9 FBH8N12M 1 / 2" 12MM 28.5 25.4 22.2 19.0 17.5 10.3 57.9
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
15

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS
Female Run Tee Product Drawing

To connect to a male tapered threaded apparatus or pipe to a gas line at a 90° elbow. (Special requirements available on requ est)

Product Dimension Table

INCH INCH
(P) (T) Tube (P) (T) Tube
Part No. NPT Size F G B D E H HY Part No. NPT Size F G B D E H HY
FRT2N2T 1 / 8" 1 / 8" 14.2 11.1 9.5 11.0 2.4 18.0 19.0 FRT2N3M 1 / 8" 3MM 14.2 11.1 9.5 11.0 2.4 18.0 19.0
FRT2N4T 1 / 8" 1 / 4" 14.2 14.2 9.5 12.7 4.8 19.6 19.0 FRT2N6M 1 / 8" 6MM 14.2 14.2 9.5 12.7 4.8 19.6 19.0
FRT4N4T 1 / 4" 1 / 4" 19.0 14.2 14.2 12.7 4.8 22.4 22.4 FRT4N6M 1 / 4" 6MM 19.0 14.2 14.2 12.7 4.8 22.4 22.4
FRT4N6T 1 / 4" 3 / 8" 19.0 17.5 14.2 14.5 7.1 23.1 22.4 FRT4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 8.0 23.1 22.4
FRT6N8T 3 / 8" 1 / 2" 22.2 22.2 14.2 17.5 10.3 24.9 22.4 FRT6N12M 3 / 8" 12MM 22.2 22.2 14.2 17.5 10.3 24.9 22.4
FRT8N8T 1 / 2" 1 / 2" 28.5 22.2 19.0 17.5 10.3 29.7 28.5 FRT8N12M 1 / 2" 12MM 22.0 22.2 19.0 17.5 10.3 29.7 28.5
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Male Branch Tee Product Drawing

To connect to a female tapered threaded apparatus to a gas line in a ‘T’ configuration. (Special requirements available on request)

Product Dimension Table

INCH INCH
(P) (T) Tube (P) (T) Tube
Part No. NPT Size F F1 G B D E H Part No. NPT Size F F1 G B D E H
MBT2N2T 1 / 8" 1 / 8" 11.1 11.1 9.5 11.0 2.4 17.0 17.8 MBT2N3M 1 / 8" 3MM 11.1 11.1 9.5 11.0 2.4 17.0 17.8
MBT2N4T 1 / 8" 1 / 4" 14.2 14.2 9.5 12.7 4.8 18.8 18.8 MBT2N6M 1 / 8" 6MM 14.2 14.2 9.5 12.7 4.8 18.8 18.8
MBT4N2T 1 / 4" 1 / 8" 14.2 11.1 14.2 11.0 2.4 18.0 23.4 MBT4N3M 1 / 4" 3MM 14.2 11.1 14.2 11.0 2.4 18.0 23.4
MBT4N4T 1 / 4" 1 / 4" 14.2 14.2 14.2 12.7 4.8 19.6 23.4 MBT4N6M 1 / 4" 6MM 14.2 14.2 14.2 12.7 4.8 19.6 23.4
MBT4N6T 1 / 4" 3 / 8" 17.5 17.5 14.2 14.5 7.1 23.1 25.4 MBT4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 8.0 23.1 25.4
MBT6N6T 3 / 8" 3 / 8" 17.5 17.5 14.2 14.5 7.1 23.1 28.2 MBT6N10M 3 / 8" 10MM 19.0 19.0 14.2 14.5 8.0 23.1 28.2
MBT6N8T 3 / 8" 1 / 2" 20.5 22.2 14.2 17.5 9.5 24.9 28.2 MBT6N12M 3 / 8" 12MM 20.5 22.2 14.2 17.5 9.5 24.9 28.2
MBT8N8T 1 / 2" 1 / 2" 22.2 22.2 19.0 17.5 10.3 24.9 33.0 MBT8N12M 1 / 2" 12MM 22.2 22.2 19.0 17.5 10.3 24.9 33.0
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

16

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Male Elbow Product Drawing

To connect tubes to a female tapered threaded apparatus at a 90° angle. (Special requirements available on request)

Product Dimension Table

INCH METRIC
Tube F G B D E H HY Tube F G B D E H HY
Part No. P (NPT) Size Part No. P (NPT) Size
ME2N2T 1 / 8" 1 / 8" 11.1 11.1 9.5 11.0 2.4 17.0 17.8 ME2N3M 1 / 8" 3MM 11.1 11.1 9.5 11.0 2.4 17.0 17.8
ME2N4T 1 / 8" 1 / 4" 12.5 14.2 9.5 12.7 4.8 19.6 18.8 ME2N6M 1 / 8" 6MM 12.5 14.2 9.5 12.7 4.8 19.6 18.8
ME4N2T 1 / 4" 1 / 8" 14.2 11.1 14.2 11.0 2.4 18.0 23.4 ME4N3M 1 / 4" 3MM 14.2 11.1 14.2 11.0 2.4 18.0 23.4
ME4N4T 1 / 4" 1 / 4" 14.2 14.2 14.2 12.7 4.8 19.6 23.4 ME4N6M 1 / 4" 6MM 14.2 14.2 14.2 12.7 4.8 19.6 23.4
ME4N5T 1 / 4" 5 / 16" 14.2 15.9 14.2 13.5 6.4 21.3 24.4 ME4N8M 1 / 4" 8MM 14.2 15.9 14.2 13.5 6.4 21.3 24.4
ME4N6T 1 / 4" 3 / 8" 17.5 17.5 14.2 14.5 7.1 23.9 26.2 ME4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 7.1 23.9 26.2
ME4N8T 1 / 4" 1 / 2" 20.5 22.2 14.2 17.5 7.1 25.9 28.2 ME4N12M 1 / 4" 12MM 20.5 22.2 14.2 17.5 7.1 25.9 28.2
ME6N4T 3 / 8" 1 / 4" 17.5 14.2 14.2 12.7 4.8 22.4 26.2 ME6N6M 3 / 8" 6MM 17.5 14.2 14.2 12.7 4.8 22.4 26.2
ME6N8T 3 / 8" 5 / 16" 17.5 15.9 14.2 13.5 6.4 23.1 26.2 ME6N8M 3 / 8" 8MM 17.5 15.9 14.2 13.5 6.4 23.1 26.2
ME6N6T 3 / 8" 3 / 8" 17.5 17.5 14.2 14.5 7.1 23.9 26.2 ME6N10M 3 / 8" 10MM 19.0 19.0 14.2 14.5 8.0 23.9 26.2
ME6N8T 3 / 8" 1 / 2" 20.5 22.2 14.2 17.5 9.5 25.9 28.2 ME6N12M 3 / 8" 12MM 20.5 22.2 14.2 17.5 9.5 25.9 28.2
ME8N4T 1 / 2" 1 / 4" 22.2 14.2 19.0 12.7 4.8 24.4 33.0 ME8N6M 1 / 2" 6MM 22.2 14.2 19.0 12.7 4.8 24.4 33.0
ME8N5T 1 / 2" 5 / 16" 22.2 15.9 19.0 13.5 6.4 25.1 33.0 ME8N8M 1 / 2" 8MM 22.2 15.9 19.0 13.5 6.4 25.1 33.0
ME8N6T 1 / 2" 3 / 8" 22.2 17.5 19.0 14.5 7.1 25.9 33.0 ME8N10M 1 / 2" 10MM 22.2 19.0 19.0 14.5 8.0 25.9 33.0
ME8N8T 1 / 2" 1 / 2" 22.2 22.2 19.0 17.5 10.3 25.9 33.0 ME8N12M 1 / 2" 12MM 22.2 22.2 19.0 17.5 10.3 25.9 33.0
ME8N12T 1 / 2" 3 /4" 27.0 28.5 19.0 17.5 11.9 29.7 36.8 ME8N19M 1 / 2" 19MM 27.0 28.5 19.0 17.5 11.9 29.7 36.8
ME12N8T 3 /4" 1 / 2" 27.0 22.2 19.0 17.5 10.3 29.7 36.8 ME12N12M 3 /4" 12MM 27.0 22.2 19.0 17.5 10.3 29.7 36.8
ME12N12T 3 /4" 3 / 4" 27.0 28.5 19.0 17.5 15.8 29.7 36.8 ME12N19M 3 /4" 19MM 27.0 28.5 19.0 17.5 12.7 29.7 36.8
ME16N16T 1" 1" 35.0 38.0 24.0 20.7 22.0 36.8 46.5 ME16N25M 1" 25MM 35.0 38.0 24.0 20.7 22.0 36.8 46.5
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

17

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Female Branch Tee Product Drawing

To connect a male tapered threaded apparatus or pipe to a gas line in a ‘T’ configuration. (Special requirements available on request)

Product Dimension Table

INCH INCH
(P) (T) Tube (P) (T) Tube
Part No. NPT Size F G B D E H HY Part No. NPT Size F G B D E H HY
FBT2N2T 1 / 8" 1 / 8" 14.2 11.1 9.5 11.0 2.4 17.0 17.8 FBT2N3M 1 / 8" 3MM 14.2 11.1 9.5 11.0 2.4 17.0 17.8
FBT2N4T 1 / 8" 1 / 4" 14.2 14.2 9.5 12.7 4.8 18.8 18.8 FBT2N6M 1 / 8" 6MM 14.2 14.2 9.5 12.7 4.8 18.8 18.8
FBT4N2T 1 / 4" 1 / 8" 19.0 11.1 14.2 11.0 2.4 18.0 23.4 FBT4N3M 1 / 4" 3MM 19.0 11.1 14.2 11.0 2.4 18.0 23.4
FBT4N4T 1 / 4" 1 / 4" 19.0 14.2 14.2 12.7 4.8 19.6 23.4 FBT4N6M 1 / 4" 6MM 19.0 14.2 14.2 12.7 4.8 19.6 23.4
FBT4N6T 1 / 4" 3 / 8" 19.0 17.5 14.2 14.5 7.1 22.4 25.4 FBT4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 8.0 22.4 25.4
FBT4N8T 1 / 4" 1 / 2" 20.5 22.2 14.2 17.5 10.3 24.9 28.2 FBT4N12M 1 / 4" 12MM 20.5 22.2 14.2 17.5 10.3 24.9 28.2
FBT6N6T 3 / 8" 3 / 8" 22.2 17.5 14.2 14.5 7.1 24.9 28.2 FBT6N10M 3 / 8" 10MM 22.2 19.0 14.2 14.5 8.0 24.9 28.2
FBT6N8T 3 / 8" 1 / 2" 22.2 22.2 14.2 17.5 10.3 24.9 28.2 FBT6N12M 3 / 8" 12MM 22.2 22.2 14.2 17.5 10.3 24.9 28.2
FBT8N8T 1 / 2" 1 / 2" 28.5 22.2 19.0 17.5 10.3 24.9 33.0 FBT8N12M 1 / 2" 12MM 28.5 22.2 19.0 17.5 10.3 24.9 33.0
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

18

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Female Connector Product Drawing

To connect tubes to male tapered threaded apparatus or pipe. (Special requirements available on request)

Product Dimension Table

INCH METRIC
F G B D E H F G B D E H
Part No. P (NPT) Tube Size Part No. P (NPT) Tube Size
FC2N2T 1 / 8" 1 / 8" 14.2 11.1 9.5 11.0 2.4 22.1 FC2N3M 1 / 8" 3MM 14.2 11.1 9.5 11.0 2.4 22.1
FC2N4T 1 / 8" 1 / 4" 14.2 14.2 9.5 12.7 4.8 23.9 FC2N6M 1 / 8" 6MM 14.2 14.2 9.5 12.7 4.8 23.9
FC2N6T 1 / 8" 3 / 8" 17.5 17.5 9.5 13.5 7.1 24.6 FC2N8M 1 / 8" 8MM 15.8 15.9 9.5 13.5 6.4 24.6
FC4N2T 1 / 4" 1 / 8" 19.0 11.1 14.2 11.0 2.4 27.0 FC4N3M 1 / 4" 3MM 19.0 11.1 14.2 11.0 2.4 27.0
FC4N4T 1 / 4" 1 / 4" 19.0 14.2 14.2 12.7 4.8 28.5 FC4N6M 1 / 4" 6MM 19.0 14.2 14.2 12.7 4.8 28.5
FC4N6T 1 / 4" 3 / 8" 19.0 17.5 14.2 13.5 7.1 29.5 FC4N10M 1 / 4" 10MM 19.0 19.0 14.2 14.5 8.0 29.5
FC4N8T 1 / 4" 1 / 2" 22.2 22.2 14.2 14.5 10.3 30.2 FC4N12M 1 / 4" 12MM 22.2 22.2 14.2 17.5 10.3 30.2
FC4N12T 1 / 4" 3 / 4" 28.5 28.5 14.2 17.5 10.3 30.2 FC4N19M 1 / 4" 19MM 28.5 28.5 14.2 17.5 10.3 30.2
FC6N4T 3 / 8" 1 / 4" 22.2 14.2 14.2 12.7 4.8 30.2 FC6N6M 3 / 8" 6MM 22.2 14.2 14.2 12.7 4.8 30.2
FC6N5T 3 / 8" 5 / 16" 22.2 15.9 14.2 13.5 6.4 31.0 FC6N8M 3 / 8" 8MM 22.2 15.9 14.2 13.5 6.4 31.0
FC6N6T 3 / 8" 3 / 8" 22.2 17.5 14.2 14.5 7.1 31.8 FC6N10M 3 / 8" 10MM 22.2 19.0 14.2 14.5 8.0 31.8
FC6N8T 3 / 8" 1 / 2" 22.2 22.2 14.2 17.5 10.3 31.8 FC6N12M 3 / 8" 12MM 22.2 22.2 14.2 17.5 10.3 31.8
FC8N4T 1 / 2" 1 / 4" 28.5 14.2 19.0 12.7 4.8 35.0 FC8N6M 1 / 2" 6MM 28.5 14.2 19.0 12.7 4.8 35.0
FC8N5T 1 / 2" 5 / 16" 28.5 15.9 19.0 13.5 6.4 35.8 FC8N8M 1 / 2" 8MM 28.5 15.9 19.0 13.5 6.4 35.8
FC8N6T 1 / 2" 3 / 8" 28.5 17.5 19.0 14.5 7.1 36.6 FC8N10M 1 / 2" 10MM 28.5 19.0 19.0 14.5 8.0 36.6
FC8N8T 1 / 2" 1 / 2" 28.5 22.2 19.0 17.5 10.3 36.6 FC8N12M 1 / 2" 12MM 28.5 22.2 19.0 17.5 10.3 36.6
FC8N12T 1 / 2" 3 / 4" 28.5 28.5 19.0 17.5 15.8 36.6 FC8N19M 1 / 2" 19MM 28.5 28.5 19.0 17.5 15.8 36.6
FC12N8T 3 / 4" 1 / 2" 32.0 22.2 19.0 17.5 10.3 38.1 FC12N12M 3 / 4" 12MM 32.0 22.2 19.0 17.5 10.3 38.1
FC12N12T 3 / 4" 3 / 4" 32.0 28.5 19.0 17.5 15.8 38.1 FC12N19M 3 / 4" 19MM 32.0 28.5 19.0 17.5 15.8 38.1
FC12N16T 3 / 4" 1" 35.0 38.0 19.0 20.7 22.0 41.2 FC12N25M 3 / 4" 25MM 35.0 38.0 19.0 20.7 19.0 41.2
FC16N16T 1" 1" 41.0 38.0 24.0 20.7 22.0 50.0 FC16N25M 1" 25MM 41.0 38.0 24.0 20.7 22.0 50.0
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

19

EXCEL METAL & ENGG INDUSTRIES

TUBE FITTINGS

Female Elbow Product Drawing

To connect to a male tapered threaded apparatus or pipe to a gas line at a 90° angle. (Special requirements available on request)

Product Dimension Table

INCH METRIC
Part No. P (NPT) (T) Tube F G B D E H HY Part No. P (NPT) (T) Tube F G B D E H HY
Size Size

FE2N2T 1 / 8" 1 / 8" 14.0 11.1 9.5 11.0 2.4 18.0 19.0 FE2N3M 1 / 8" 3MM 14.0 11.1 9.5 11.0 2.4 18.0 19.0

FE2N4T 1 / 8" 1 / 4" 14.0 14.2 9.5 12.7 4.8 19.6 19.0 FE2N6M 1 / 8" 6MM 14.0 14.2 9.5 12.7 4.8 19.6 19.0

FE4N2T 1 / 4" 1 / 8" 19.0 11.1 14.2 11.0 2.4 20.8 22.4 FE4N3M 1 / 4" 3MM 19.0 11.1 14.2 11.0 2.4 20.8 22.4

FE4N4T 1 / 4" 1 / 4" 19.0 14.2 14.2 12.7 4.8 22.4 22.4 FE4N6M 1 / 4" 6MM 19.0 14.2 14.2 12.7 4.8 22.4 22.4

FE4N6T 1 / 4" 3 / 8" 19.0 17.5 14.2 14.5 7.1 23.1 22.4 FE4N8M 1 / 4" 8MM 19.0 15.9 14.2 13.5 6.3 23.1 22.4

FE4N8T 1 / 4" 1 / 2" 20.5 22.2 14.2 17.5 10.3 25.9 22.4 FE4N12M 1 / 4" 12MM 20.5 22.2 14.2 17.5 10.3 25.9 22.4

FE6N4T 3 / 8" 1 / 4" 22.2 14.2 14.2 12.7 4.8 24.4 22.4 FE6N6M 3 / 8" 6MM 22.2 14.2 14.2 12.7 4.8 24.4 22.4

FE6N6T 3 / 8" 3 / 8" 22.2 17.5 14.2 14.5 7.1 25.9 22.4 FE6N8M 3 / 8" 8MM 22.2 15.9 14.2 13.5 6.3 25.9 22.4

FE6N8T 3 / 8" 1 / 2" 22.2 22.2 14.2 17.5 10.3 25.9 22.4 FE6N12M 3 / 8" 12MM 22.2 22.2 14.2 17.5 10.3 25.9 22.4

FE8N4T 1 / 2" 1 / 4" 28.5 14.2 19.0 12.7 4.8 27.2 28.5 FE8N6M 1 / 2" 6MM 28.5 14.2 19.0 12.7 4.8 27.2 28.5

FE8N6T 1 / 2" 3 / 8" 28.5 17.5 19.0 14.5 7.1 28.7 28.5 FE8N8M 1 / 2" 8MM 28.5 15.9 19.0 13.5 6.3 28.7 28.5

FE8N8T 1 / 2" 1 / 2" 28.5 22.2 19.0 17.5 10.3 28.7 28.5 FE8N12M 1 / 2" 12MM 28.5 22.2 19.0 17.5 10.3 28.7 28.5

FE12N8T 3 / 4" 1 / 2" 32.0 22.2 19.0 17.5 10.3 29.7 28.5 FE12N12M 3 / 4" 12MM 32.0 22.2 19.0 17.5 10.3 29.7 28.5

FE12N12T 3 / 4" 3 / 4" 32.0 28.5 19.0 17.5 15.9 34.5 31.8 FE12N19M 3 / 4" 19MM 32.0 28.5 19.0 17.5 15.9 34.5 31.8

FE12N16T 3 / 4" 1" 42.0 38.0 24.0 20.7 22.2 41.4 38.1 FE16N25M 3 / 4" 25MM 42.0 38.0 24.0 20.7 22.2 41.4 38.1
DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

20

EXCEL METAL & ENGG INDUSTRIES