Model KDJ

Jet Diffusers

Introduction
KMC Diffuse - a - Jet diffuser is a high capacity
diffuser with jet type air flow specifically designed for
spot heating or cooling in high ceiling applications.
The elegant design is best suited for architectural
high end appearance and provides a modern
alternative to any traditional diffusers while
upholding the trusted performance characteristics.
Application
• “Spot” type supply air outlet with a reversible
nozzle for jet or diffused air patterns
• Recommended for HVAC installations which
require long or short throw pattern flexibility with
trajectory control
• Ideally suited for predictable directional control
of conditioned air within large spaces such as
malls, exhibit halls, sports arenas, industrial and
manufacturing facilities, atrium areas, and large
office building entrances
• Spot air distribution ideal for industrial heating,
ventilating or cooling
• Side wall, ceiling or duct mounted applications
• Rapid temperature equalization eliminates
stratification
Product Features D
(KDJ - 4)
B
(KDJ - 2) #12 X 1-¾” PANHEAD S/M
• Reversible, Rotating Nozzle provides a long MOUNTING SCREWS

throw jet pattern, or diffused, short throw pattern LOCKING SCREWS

– without using volume dampers
• Field adjustable pattern and direction – from the A
(KDJ - 1)
C
face of the outlet (KDJ - 3)

• Directional control within a 60° arc 200mm,

250mm, 300mm, 375mm diameter nozzles
Size
KDJ - 1 KDJ - 2 KDJ - 3 KDJ - 4
• 1, 2, 3, or 4 nozzle panel assembly permits multi- (Inside Dia)
J P S
directional, as well as mixed jet and diffused mm AxA ExE AxB ExF AxC ExG AxD ExH
patterns from one location. 200 275 x 275 215 x 215 275 x 550 215 x 490 275 x 825 215 x 765 275 x 1100 215 x 1040 30 80 50

• Welded, heavy gauge, Aluminium, all steel 250 350 x 350 265 x 265 350 x 675 265 x 590 350 x 995 265 x 900 350 x 1315 265 x 1225 45 110 55

construction. 300 415 x 415 315 x 315 415 x 785 315 x 675 415 x 1155 315 x 1155 415 x 1510 315 x 1400 75 135 65

To Adjust The Diffuse - A - Jet 375 450 x 450 390 x 390 450 x 900 390 x 850 450 x 1350 390 x 1305 450 x 1800 390 x 1750 100 175 80

For jet stream or diffused air pattern, simply loosen

the two axis shaft lockscrews, rotate the inner
assembly 180°, and tighten lockscrews
To Set The Air Discharge Direction
First loosen the four lockscrews on the faceplate,
and turn the diffuser inner assembly until the axis
shaft is in its proper plane.
Second, to set the inner assembly at the desired Product Selection Check List
angle, loosen the axis shaft lockscrews, position • Select Unit length based on desired performance characteristics.
the inner assembly, and tighten all lockscrews. • Select outlet type by Model Number
• Select Finish

*In the interest of product development, KMC reserves the right to make changes without notice.
w ww.kmcq ata r.co m 1 Company
Khalid Manufacturing
 Model KDJ
Jet Diffusers

Size 200 mm Nozzle Diameter

CMH 221 323 425 510 595 680 731 765 816 850
(1 NOZZLE)
KDJ-1-200

Ps 7.5 12.5 22.5 35 45 60 70 75 87.5 95

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 1.8 3.7 7.0 2.4 5.2 10.1 3.4 6.7 11.6 4.0 8.2 12.8 4.9 9.5 13.7 5.5 10.4 14.6 5.8 10.7 15.2 6.1 11.0 15.5 6.4 11.3 16.2 6.7 11.6 16.5
Throw - Diff 0.9 1.8 3.7 1.2 2.7 5.5 1.8 3.7 6.1 2.1 4.3 6.7 2.4 5.2 7.3 2.7 5.5 7.6 3.0 5.8 7.9 3.4 5.8 8.2 3.4 6.1 8.5 3.7 6.1 8.5
CMH 425 646 850 1020 1190 1360 1445 1530 1615 1700
(2 NOZZLE)
KDJ-2-200

Ps 5 12.5 22.5 35 45 60 67.5 75 85 95

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 2.4 4.9 9.8 3.7 7.3 14.3 4.9 9.8 16.5 5.8 11.6 18.0 6.7 13.4 19.2 7.6 14.6 20.7 8.2 14.9 21.3 8.5 15.5 22.0 9.1 15.9 22.6 9.8 16.5 23.2
Throw - Diff 1.2 2.4 5.2 1.8 4.0 7.6 2.4 5.2 8.5 3.0 6.1 9.5 3.7 7.0 10.4 4.0 7.6 11.0 4.3 7.9 11.3 4.6 8.2 11.6 4.9 8.5 11.9 5.2 8.5 12.2
CMH 646 952 1275 1530 1785 2040 2176 2295 2431 2550
(3 NOZZLE)
KDJ-3-200

Ps 5 12.5 22.5 32.5 42.5 57.5 65 72.5 80 90

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 3.0 6.1 11.9 4.3 8.8 17.4 5.8 11.9 20.1 7.0 14.0 22.0 8.2 16.5 23.8 9.5 18.0 25.3 10.1 18.6 26.2 10.7 18.9 26.8 11.3 19.5 27.7 11.9 20.1 28.4
Throw - Diff 1.5 3.0 6.4 2.4 4.6 9.1 3.0 6.1 10.7 3.7 7.3 11.6 4.3 8.8 12.5 4.9 9.5 13.4 5.2 9.8 13.7 5.5 10.1 14.3 5.8 10.4 14.6 6.1 10.7 14.9
CMH 850 1275 1700 2040 2380 2720 2890 3060 3230 3400
(4 NOZZLE)
KDJ-4-200

Ps 5 12.5 22.5 32.5 45 60 67.5 75 82.5 92.5

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 3.4 6.7 13.7 5.2 10.1 20.1 6.7 13.7 23.2 8.2 16.2 25.3 9.5 18.9 27.4 11.0 20.7 29.3 11.6 21.3 30.2 12.2 22.0 31.1 12.8 22.6 32.0 13.7 23.2 32.6
Throw - Diff 1.8 3.7 7.3 2.7 5.5 10.7 3.7 7.3 12.2 4.3 8.5 13.4 5.2 10.1 14.6 5.8 11.0 15.5 6.1 11.3 15.9 6.4 11.6 16.5 6.7 11.9 16.8 7.3 12.2 17.4

Size 250 mm Nozzle Diameter

CMH 629 748 1003 1139 1258 1513 1632 1768 1887 2006
(1 NOZZLE)
KDJ-1-250

Ps 12.5 17.5 32.5 40 50 72.5 85 100 112.5 127.5

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 3.7 7.0 14.0 4.3 8.2 16.8 5.5 11.3 21.3 6.4 12.8 22.9 7.0 14.0 24.1 8.5 16.8 26.2 9.1 18.3 27.4 9.8 19.8 28.4 10.7 20.7 29.3 11.3 21.3 30.2
Throw - Diff 1.8 3.7 7.3 2.1 4.3 8.8 3.0 5.8 11.3 3.4 6.7 11.9 3.7 7.3 12.5 4.6 8.8 13.7 4.9 9.5 14.3 5.2 10.4 14.9 5.5 11.0 15.5 5.8 11.3 15.9
CMH 1258 1513 2006 2261 2516 3026 3264 3519 3774 4029
(2 NOZZLE)
KDJ-2-250

Ps 12.5 17.5 32.5 40 50 72.5 82.5 97.5 110 127.5

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 4.9 10.1 19.8 6.1 11.9 23.8 7.9 15.9 30.2 8.8 18.0 32.0 10.1 19.8 33.8 11.9 23.8 37.2 12.8 25.9 38.7 14.0 27.7 39.9 14.9 29.3 41.5 15.9 30.2 43.0
Throw - Diff 2.7 5.2 10.4 3.0 6.4 12.5 4.3 8.2 15.9 4.6 9.5 16.8 5.2 10.4 17.7 6.4 12.5 19.5 6.7 13.4 20.4 7.3 14.6 21.0 7.9 15.5 22.0 8.2 15.9 22.6
CMH 1887 2261 3026 3400 3774 4522 4913 5287 5661 6035
(3 NOZZLE)
KDJ-3-250

Ps 12.5 17.5 32.5 40 50 72.5 85 97.5 112.5 127.5

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 6.1 12.2 24.4 7.3 14.6 29.3 9.8 19.5 37.2 11.0 22.0 39.3 12.2 24.4 41.5 14.6 29.3 45.4 15.9 31.7 47.3 17.1 34.1 49.1 18.3 36.0 50.9 19.5 37.2 52.4
Throw - Diff 3.0 6.4 12.8 4.0 7.6 15.2 5.2 10.4 19.5 5.8 11.6 20.7 6.4 12.8 22.0 7.6 15.2 23.8 8.2 16.8 25.0 8.8 18.0 25.9 9.5 18.9 26.8 10.4 19.5 27.4
CMH 2516 3026 4029 4522 5032 6035 6545 7038 7548 8058
(4 NOZZLE)
KDJ-4-250

Ps 12.5 17.5 32.5 40 50 72.5 85 100 115 130

NC <20 <20 26 32 37 42 44 46 48 49
Throw - Jet 7.0 14.0 28.0 8.5 16.8 33.8 11.3 22.6 43.0 12.5 25.3 45.4 14.0 28.0 47.9 16.8 33.8 52.4 18.3 36.6 54.6 19.8 39.3 56.7 21.0 41.5 58.8 22.6 43.0 60.7
Throw - Diff 3.7 7.3 14.6 4.6 8.8 17.7 5.8 11.9 22.6 6.7 13.4 23.8 7.3 14.6 25.3 8.8 17.7 27.4 9.8 19.2 28.7 10.4 20.7 29.9 11.0 22.0 30.8 11.9 22.6 32.0

Size 300 mm Nozzle Diameter

CMH 816 986 1139 1309 1632 1955 2278 2618 2771 2941
(1 NOZZLE)
KDJ-1-300

Ps 10 12.5 17.5 22.5 37.5 52.5 72.5 95 107.5 120

NC 20 25 29 32 37 42 46 49 50 52
Throw - Jet 4.0 7.6 15.2 4.6 9.1 18.6 5.2 10.7 21.3 6.1 12.2 23.5 7.6 15.2 25.9 9.1 18.3 28.7 10.7 21.3 30.8 12.2 23.5 32.9 13.1 24.1 33.8 13.7 24.7 35.1
Throw - Diff 2.1 4.0 8.2 2.4 4.9 10.1 2.7 5.8 11.6 3.4 6.7 12.5 4.0 8.2 14.0 4.9 9.8 15.2 5.8 11.6 16.5 6.7 12.5 17.7 7.0 12.8 18.3 7.3 13.4 18.9
CMH 1632 1955 2278 2618 3264 3910 4573 5219 5542 5882
(2 NOZZLE)
KDJ-2-300

Ps 0.04 0.05 0.07 0.1 0.15 0.22 0.3 0.38 0.43 0.49
NC 24 28 32 35 41 45 49 52 54 55
Throw - Jet 5.5 10.7 21.6 6.4 12.8 25.9 7.6 14.9 30.2 8.5 17.4 32.9 10.7 21.6 36.9 12.8 25.9 40.2 15.2 30.2 43.6 17.4 32.9 46.6 18.3 33.8 47.9 19.5 35.1 49.4
Throw - Diff 3.0 5.8 11.6 3.4 7.0 14.0 4.0 8.2 16.2 4.6 9.5 17.7 5.8 11.6 19.8 7.0 14.0 21.6 8.2 16.2 23.5 9.1 17.7 25.0 9.8 18.3 25.6 10.4 18.9 26.5
CMH 2448 2941 3434 3910 4896 5882 6851 7837 8330 8806
(3 NOZZLE)
KDJ-3-300

Ps 0.04 0.05 0.07 0.09 0.15 0.21 0.28 0.37 0.42 0.47
NC 24 28 32 35 41 45 49 52 54 55
Throw - Jet 6.7 13.1 26.5 7.9 15.9 31.7 9.1 18.6 37.2 10.7 21.0 40.2 13.1 26.5 45.1 15.9 31.7 49.4 18.6 37.2 53.4 21.3 40.2 57.0 22.6 41.5 58.8 23.8 42.7 60.4
Throw - Diff 3.7 7.0 14.3 4.3 8.5 17.1 4.9 10.1 19.8 5.8 11.3 21.6 7.0 14.3 24.1 8.5 17.1 26.5 10.1 19.8 28.7 11.3 21.6 30.5 12.2 22.3 31.7 12.8 22.9 32.3
CMH 3264 3910 4573 5219 6528 7837 9146 10438 11101 11747
(4 NOZZLE)
KDJ-4-300

Ps 0.04 0.05 0.07 0.09 0.15 0.21 0.29 0.38 0.43 0.48
NC 26 30 34 38 43 48 51 55 56 57
Throw - Jet 7.6 15.2 30.5 9.1 18.3 36.6 10.7 21.3 43.0 12.2 24.4 46.6 15.2 30.5 52.1 18.3 36.6 57.0 21.3 43.0 61.6 24.4 46.6 65.9 25.9 48.2 68.0 27.4 49.4 69.8
Throw - Diff 4.0 8.2 16.5 4.9 9.8 19.5 5.8 11.6 22.9 6.7 13.1 25.0 8.2 16.5 28.0 9.8 19.8 30.5 11.6 22.9 33.2 13.1 25.0 35.4 14.0 25.9 36.6 14.6 26.5 37.5

*In the interest of product development, KMC reserves the right to make changes without notice.

Khalid Manufacturing Company w w w.km cq a ta r.co m

Model KDJ
Jet Diffusers

Size 375 mm Nozzle Diameter

CMH 1105 1326 1547 1768 2210 2652 3094 3536 3978 4420
(1 NOZZLE)
KDJ-1-375

Ps 0.03 0.04 0.05 0.07 0.11 0.16 0.21 0.28 0.35 0.43
NC <20 20 24 27 33 38 42 45 48 51
Throw - Jet 4.6 9.1 18.3 5.5 11.0 22.0 6.4 12.8 25.6 7.3 14.6 28.0 9.1 18.3 31.1 11.0 22.0 34.1 12.8 25.6 36.9 14.6 28.0 39.6 16.5 29.6 41.8 18.3 31.1 44.2
Throw - Diff 2.4 4.9 9.5 2.7 5.8 11.6 3.4 6.7 13.4 4.0 7.6 14.6 4.9 9.5 16.2 5.8 11.6 17.7 6.7 13.4 19.2 7.6 14.6 20.4 8.5 15.5 22.0 9.5 16.2 22.9
CMH 2210 2652 3094 3536 4420 5304 6188 7072 7956 8840
(2 NOZZLE)
KDJ-2-375

Ps 0.03 0.04 0.05 0.07 0.11 0.16 0.22 0.28 0.36 0.44
NC <20 24 28 31 36 41 45 48 51 53
Throw - Jet 6.4 12.8 25.9 7.6 15.5 31.1 9.1 18.0 36.3 10.4 20.7 39.6 12.8 25.9 44.2 15.5 31.1 48.5 18.0 36.3 52.1 20.7 39.6 55.8 23.2 41.8 59.1 25.9 44.2 62.5
Throw - Diff 3.4 6.7 13.4 4.0 8.2 16.2 4.6 9.5 18.9 5.5 10.7 20.4 6.7 13.4 22.9 8.2 16.2 25.3 9.5 18.9 27.1 10.7 20.4 29.0 12.2 22.0 30.8 13.4 22.9 32.6
CMH 3315 3978 4641 5304 6630 7956 9282 10608 11934 13260
(3 NOZZLE)
KDJ-3-375

Ps 0.03 0.04 0.05 0.07 0.11 0.15 0.21 0.27 0.35 0.43
NC 20 25 29 32 37 42 46 49 52 54
Throw - Jet 7.9 15.9 31.7 9.5 18.9 38.1 11.0 22.3 44.5 12.8 25.3 48.5 15.9 31.7 54.0 18.9 38.1 59.1 22.3 44.5 64.0 25.3 48.5 68.3 28.7 51.2 72.6 31.7 54.0 76.5
Throw - Diff 4.3 8.2 16.5 4.9 10.1 19.8 5.8 11.6 23.2 6.7 13.1 25.3 8.2 16.5 28.0 10.1 19.8 30.8 11.6 23.2 33.2 13.1 25.3 35.7 14.9 26.8 37.8 16.5 28.0 39.9
CMH 4420 5304 6188 7072 8840 10608 12376 14144 15912 17680
(4 NOZZLE)
KDJ-4-375

Ps 0.03 0.04 0.05 0.07 0.11 0.15 0.21 0.28 0.35 0.43
NC 23 27 31 34 40 44 48 51 54 57
Throw - Jet 9.1 18.3 36.6 11.0 22.0 43.9 12.8 25.6 51.2 14.6 29.3 55.8 18.3 36.6 62.5 22.0 43.9 68.3 25.6 51.2 73.8 29.3 55.8 79.0 32.9 59.1 83.8 36.6 62.5 88.4
Throw - Diff 4.9 9.5 19.2 5.8 11.6 22.9 6.7 13.4 26.8 7.6 15.2 29.0 9.5 19.2 32.6 11.6 22.9 35.7 13.4 26.8 38.4 15.2 29.0 41.2 17.1 30.8 43.6 19.2 32.6 46.0

Notes :
Test Standard Pressure
ANSI / ASHRAE standard 70 PS represents Static Pressure, Pa
Sound Levels Vk, Jet Velocity
NC is noise criteria curve that will not be exceeded at the operating Meters per second (m/s), measured at the discharge of the diffuser
point. This is determined by assuming a 10dB (ref: 10-12 watts)
room attenuation that is subtracted from the power levels in each of
the 2nd thru 7th octave bands
Throw
The numbers shown are throw distances, in meters, measured
along the jet trajectory axis relating to terminal velocities of 1.0, 0.5,
& 0.25 m/s, for a free, unbounded jet (no surface effects). Throws
are shown for both the Jet air pattern and Diffused air pattern.
Terminal velocity is the air speed, in meters per second, measured
in the supply air stream.

Typical Specification
Contractor shall furnish & install KMC Model KDJ Jet Diffuser multi-directional, as well as mixed jet and diffused patterns, from
air outlets of the jet discharge and/or diffusing type at each point one location. (Optional) The outlet shall be directly mounted at the
indicated on the plans. The core of the outlet shall be rotatable so end of the round spiral duct where shown.
as to deliver air in a jet pattern or in a diffused pattern. The throw of
The outlet and mounting panel shall be constructed from steel or
the diffused pattern shall be approximately half that of the jet pattern
aluminum as indicated.
at similar terminal velocities. Jet type diffusers without spread
capability are not acceptable. Finishing shall be KMC standard Colour (RAL9010) or colour as
scheduled or selected by the Architect.
In either position, the axis of air flow may be varied up to 30° from
the straight-forward in a full 360° arc. The outlet shall be attached
to a mounting panel with mounting screws permitting 360° rotation.
Up to four outlets may be attached to one mounting panel permitting

*In the interest of product development, KMC reserves the right to make changes without notice.
w ww.kmcq ata r.co m 3 Company
Khalid Manufacturing