Scribd
Upload
57 views3 pages

9 CENTA CX Installation 20-60479-91-3 (Bolts & Torque)

Uploaded by

goggy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views3 pages

9 CENTA CX Installation 20-60479-91-3 (Bolts & Torque)

Uploaded by

goggy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Screw connections, preparation

D13-013-EN
and tightening torques Rev.: 3

Validity:
For all non-dynamically stressed screw connections with shank bolts in accordance with
ISO 4014, ISO 4017 and ISO 4762 (DIN 912) with metric standard thread in accordance with
DIN ISO 262, unless other specifications are given on CENTA documents.

Preparation of parts that are to be screwed together:


The joining areas must be free of dirt, preservatives and lubricants.

Preparation of screws that ARE NOT secured with liquid screw locking medium:
Give the screws extra lubrication with motor oil under the screw head and in the thread.

Preparation of screws that ARE secured with liquid screw locking medium:
Give the screws extra lubrication with motor oil under the screw head. Remove all grease from
the thread.

Screw tightening method:


Screw in (by hand with torque wrench).

Thread size Thread size


Tightening Tightening
Strength torques Strength torques
d d
class [Nm] [in lbs] class [Nm] [in lbs]
±5% ±5% ±5% ±5%
8.8 9 80 8.8 470 4160
M6 10.9 13 115 M22 10.9 670 5930
12.9 15 135 12.9 780 6900
8.8 21 185 8.8 600 5310
M8 10.9 30 265 M24 10.9 850 7520
12.9 35 310 12.9 1000 8850
8.8 41 360 8.8 750 6640
M10 10.9 60 530 M27 10.9 1070 9470
12.9 71 630 12.9 1250 11060
8.8 71 630 8.8 1000 8850
M12 10.9 104 920 M30 10.9 1450 12830
12.9 121 1070 12.9 1700 15050
8.8 113 1000 8.8 1400 12400
M14 10.9 165 1460 M33 10.9 1950 17250
12.9 195 1725 12.9 2300 20350
8.8 170 1500 8.8 1750 15500
M16 10.9 250 2210 M36 10.9 2500 22150
12.9 300 2660 12.9 3000 26550
8.8 245 2170 8.8 2300 20350
M18 10.9 350 3100 M39 10.9 3300 29200
12.9 410 3630 12.9 3800 33650
8.8 350 3100
M20 10.9 490 4340
12.9 580 5130

Issued: anderseck
Date: 25.04.2006
Page 1
Checked: kroll
Date: 08.05.2006 of 1

You might also like