Scribd
Upload
22 views1 page

Pentronic Connector STD Plastic en

PENTRONIC THERMOCOUPLE SETUP

Uploaded by

doug lipinski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views1 page

Pentronic Connector STD Plastic en

PENTRONIC THERMOCOUPLE SETUP

Uploaded by

doug lipinski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Subject to change without prior notice.

Thermocouple connector

Model Standard thermoplastic, in stock


Design Connections
Connector according to EN 50212:1996 with solid Screw terminal.
pins for longer lifetime. Supplied with rubber bush.
Colour code
Example of use As per IEC 60584-3. Type K also as per ANSI
To be mounted on cable. MC96.1

Maximum temperature Accessories


Connector 200 °C Strain relief for connected cable. To be mounted on
Rubber rubber bush: 90 °C the rear face of the connector body. See picture
below. This strain relief suits both male and female
Cable insulation sheaths and sealing cement can connectors. Article number: 03-00120.
further limit the maximum temperature.
Note that connections always should be positioned
as close as possible to room temperature.

Material
Housing: Thermo plastic
Pins and sockets: Thermocouple compatible

Article number

Type Male Female


K 03-21000 03-22000
K 03-21000A* 03-22000A*
130905 Pentronic kontakt std plast En

N 03-51000 03-52000
J 03-11000 03-12000
T 03-31000 03-32000
S/R 03-41000 03-42000
B 03-61000 03-62000
*) Yellow colour as per ANSI MC96.1

________________________________________________________________________________

Tel +46 490 258500 Fax +46 490 23766


Pentronic AB, Bergsliden 1, SE-593 96 Västervik, Sweden
www.pentronic.se [email protected]

You might also like