Specialty Oil Field Chemicals

Thermax Chemical Division

Sustainable Solutions in Energy & Environment
Thermax is an engineering company that helps business enterprises perform competitively and
sustainably in global markets. In over 75 countries, clients make use of Thermax’s products and
solutions for energy efficient and eco-friendly operations: heating equipment and power plants
that use a wide variety of fuels including solar energy; absorption chillers that use heat in place
of electricity; waste heat recovery units; water & waste water management, air pollution control
systems; performance improving chemicals.

The company provides its customers value added services – audits of energy and water, system
modifications for optimal use of resources, annual maintenance contracts, energy rentals and O&M
of power and water installations.

Thermax operations are supported by innovative R&D and partnerships with global technology
majors. It has an international sales & service network spread over 24 countries and state-of-the art
facilities (in India, Denmark and China) that manufacture to international standards.

Chemical Division
Thermax Chemical Division has been moving with a mission for decades : Innovation in the business areas of water,
fuel and oil treatment–the three pillars of industrial processes. As the globe shifts towards ecological production
techniques, we too are concentrating on cost-effective solutions to the growing problems of fuels, water, effluents and
environment.
The oil field specialty chemicals from Thermax focus on treating crude oil and water, efficiently and cost effectively.

Thermax Oil Field Chemicals

Pour Point Depressant
MAXDIP Flow Improver
Demulsifier DEEMAX

Deoiler Corrosion Inhibitor

Reverse Demulsifier OILMIN CORROMIN Oxygen Scavenger

SCALEMIN Scale Inhibitor Biocide BIOMIN

H2S Scavenger Coagulant

FeS Scavenger
SULFAMIN MAXOLYTE Flocculant
Flow Assurance
Pour Point Depressant-
Flow Improver - Rheology Modifier
A wide variety of in-house developed polymers
suitable for different crude characteristics.
Reduces Pour Point along with Rheology parameters
at lower temperature.

Paraffin Dispersant
A mixture of surfactants and polymers to maintain
paraffin in dispersed form and prevent its
accumulation on pipeline walls.

Asphaltene Inhibitor
Unique blend of polymeric additives, an
asphaltene inhibitor inhibits and disperse
asphaltenes in crude oil.

Hydrate Inhibitor
Chemistry of amido amine salt, these products
effectively control hydrates by not allowing them to
deposit on the pipeline.
Asset Integrity
Oil Line Corrosion Inhibitor Scale Inhibitor
Distinctive blend of Imidazoline and amine Advanced polymers namely ter-polymers and tetra-
surfactants designed for corrosion prevention polymers are developed in house. These can be
in production lines carrying oil, water and gases combined with organophosphonates to treat various
including H2S. scale formation in a wide range of oilfield waters.

Gas Line Corrosion Inhibitor Acid Corrosion Inhibitor

Distinctive blend of Imidazoline and amine Distinctive blend of Imidazoline and amine
surfactants designed for corrosion prevention in surfactants designed for acidizing at high
pipelines carrying mixture of gases. temperature and pressure.

FeS Scavenger H2S Scavenger

Proprietary mixture to dissolve and disperse FeS in Cyclic amine base and glycol base scavengers to treat
problematic wells. liquid and gaseous fluids.

Antifoam Biocide
Silicon and glycol base antifoams to treat oil and Special chemistry to treat SRB and GAnB.
water phases.
Water Injection
Injection Water Corrosion Inhibitors Scale Inhibitor
Distinctive blend of Imidazoline and amine Phosphonate free polymers namely ter-polymers and
surfactants designed for water injection lines tetra-polymers developed in house to treat various
carrying various commingling waters. scale formation in various commingling waters.

Biocide Oxygen Scavenger

Broad spectrum Biocides with quaternary or Bisulphite base chemicals are used to reduce the
surfactants to treat SRB and GAnB. oxygen content in injection water which will in turn
Unique blend of Biocides with polymer effectively reduce the corrosion severity.
control sessile bacteria.

H2S Scavenger Antifoam

Cyclic amine base and glycol base scavengers to treat Silicon and glycol base antifoams to treat oil and
liquid and gaseous fluids. water phases.

Coagulants, Flocculants,
Water Clarifiers
Polymers and iron compounds to treat the inlet
water from rivers, sea, bore wells.
Separation
Demulsifiers
Tailor made combination of surfactants to separate
water-in-oil emulsions. Effective on diverse oil
emulsions with water cut ranging from 5% to 40%.

Deoilers / Reverse Demulsifiers

Indigenous cationic polymers and modified
polymers to treat oil-in-water emulsions.
Aid to meet environmental norms
for produced water.

Down Stream
Pour Point Depressant – for
Lubricating Oil, Middle Distillate
Variety of in-house developed polymers to treat
different lubricating oils and middle distillates.
Reduces Pour Point along with CFPP parameters at
lower temperature.

Viscosity Index Improver

Different polymers to improve viscosity index of base
oils to meet the norms.

De-Waxing Aid
Wide range of polymers to improve wax filtration
rate and filtration cake quality.
Oilfield Chemicals Product Selection Guide
Typical recommended
Application Location Field Parameters Base/ Type Brand Name
dosages
CO2 <= 1250 ppm Range : 10-50 ppm based
Produced Water Crude oil carrying
H2S <= 1450 ppm Filming on gross liquid basis
Corrosion pipelines containing oil, CORROMIN 3125
Salinity <=25000 ppm Amine type Typical : 35 ppm based on
Inhibitor water & gas (CO2, H2S)
Temp ~70oC gross liquid basis
Crude oil carrying Non
Produced Water Temp ~70oC Range: 5-50 ppm
pipelines containing oil, phosphate SCALEMIN 3640
Scale Inhibitor Ca <=2000 ppm Typical : 35 ppm
water & gas base
Crude oil carrying
Produced Water Temp ~70oC Phosphate Range : 5-50 ppm
pipelines containing oil, SCALEMIN 4200
Scale Inhibitor Ca <=2000 ppm base Typical : 35 ppm
water & gas
Range : 300 - 1000 ppm
Crude oil carrying
Produced Water once in week 4 hrs
pipelines containing oil, SRB > 100 counts THPS base BIOMIN 2750
Biocide Typical : 500 ppm once in
water & gas (CO2, H2S)
week 4 hrs
Gas carrying pipelines
Gas Line
containing after Filming Range : 0.5-1 ltr/mmscft
Corrosion Mixture CORROMIN 2066
dehydrator and Amine type Typical : 1 ltr/mmscft
Inhibitor
desulfuriser
DEEMAX 8812,
Water cut 1 - 60% Surfactant Range : 10-75 ppm
Demulsifier Oil Water Separators 3543, 3535, 3593,
Temp 55 - 80oC mixture Typical : 25 ppm
3555
MAXDIP 2245,
Pour Point 2270, 1622, Range : 100 - 1500 ppm
Net Oil, after separator Free from water & gas Polymer
Depressant SM1822, Typical : 250 ppm
SM1622, 2278
Deoiler, Reverse Produced Water after Free from Free water Cationic OILMIN 1000, Range : 25-200 ppm
Demulsifier Separator & gas Polymer 1190 Typical : 50 ppm
Bore well, River, Sea Ferric Range : 1-5 ppm
Coagulant Raw water after filter MAXOLYTE 4700
water inlet compound Typical : 3 ppm
Bore well, River, Sea Cationic Range : 0.2-2 ppm
Flocculant Raw water after filter MAXOLYTE 2000
water inlet Polymer Typical : 1 ppm
Range : 9-12 ppm to treat 1
Bore well, River, Sea
Oxygen After Deoxygenation Bisulphite ppm DO
water, Produced water CORROMIN 3165
Scavenger Tower solution Typical : 10 ppm to treat 1
mixture tank
ppm DO
Injection Water Injection water carrying
DO <= 10 ppb Filming Range : 5-50 ppm
Corrosion pipelines containing CORROMIN 3159
Temp ~30oC Amine type Typical : 15 ppm
Inhibitor water
Injection water carrying Non
Injection Water Temp ~30oC Range : 5-20 ppm
pipelines containing phosphate SCALEMIN 3640
Scale Inhibitor Ca <=2000 ppm Typical : 15 ppm
water base
Range : 500 - 1500 ppm
Injection water carrying
Produced Water alternate once in week 4 hrs
pipelines containing SRB > 100 counts THPS base BIOMIN 2750
Biocide type 1 Typical : 1000 ppm alternate
water
once in week 4 hrs
Range : 500 - 1500 ppm
Injection water carrying
Produced Water Glute, BKC alternate once in week 4 hrs
pipelines containing SRB > 100 counts BIOMIN 4020
Biocide type 2 base Typical : 1000 ppm alternate
water
once in week 4 hrs
Organo
HCL or HCL HF
Acid Corrosion inorganic Range : 0.1-1% v/v of acid
Acid Injection mixture, 1000 psi, ACIMIN 1400
Inhibitor compound Typical : 0.2% v/v of acid
120oC
mixture
Pour Point MAXDIP 2810, Range : 1000-4000 ppm
Lubricating base oils 150N, 500N type Polymer
Depressant 8733 Typical : 1500 ppm
Sustainable Solutions in
Energy & Environment

Thermax Chemical Division

Environment House, 90-92, BG Block,
MIDC, Bhosari, Pune - 411026, India

Phone : +91 20 67156000

http://www.thermaxglobal.com/thermax-chemicals/

Thermax Inc.
16200 Park Row, Suite 190,
Houston, Texas 77084, USA

[email protected]

Phone : +1 281-600-1331-5

www.thermax-usa.com

www.thermaxglobal.com Thermax Business Portfolio

Heating
Registered Office
Cooling
D-13, MIDC Industrial Area, R D Aga Road,
Chinchwad, Pune 411019, India
Power
[email protected]
Air Pollution Control
Customer Care: 1800-209-0115
Chemicals

Water and Wastewater Solutions

www.linkedin.com/company-beta/166428 Solar

www.facebook.com/Thermaxglobal Specialised Services

[email protected]

This brochure presents only some of our products and

we reserve the right to amend any product details
without notice. The photographs used in the brochure
are indicative and may not match the actual plant.

© Thermax Limited, Nov. 2017