SANJEEV AGRAWAL

Phone: +91-8130790381, Email- [email protected]

~Project management, Hardware Design, Embedded Systems & Product Development

Specialization in IOT, Home Automation, Railway, Industrial Automation & Agriculture
ACADEMIA

B.E (Electronics & Communication Engineering) (1998 – 2002) from Rajiv Gandhi Technical University, Bhopal.
M.B.A (Marketing & Operations) (2008 - 2011) from I.M.T. Ghaziabad.

Professional Preface
A technology-oriented professional with 17+ years of experience in NPI, NPD, Electronics Design, IoT, Embedded Systems.
Responsible for Projects management, Technical Specification, SRS, System Architecture Designing, DFX, DFMEA, Concept
Design, Hardware Design, DFM, PCBA, Dual inline package (DIP) and SMT components assembly, PCB, Gerber, Stencil,
soldier paste, Manual soldering, Wave soldering, Final inspection, Analog & Digital Design, RF Design, IOT (Internet of
Things), SDLC, BOM, Component’s selection, Cost, Schematic, Layout design, Design Simulation, PCB Assembly & Testing,
Firmware designing with Embedded C & Assembly language, Peripherals Interface, Communication Protocol
implementation, Test plan and Test procedure, Verification & Validation, Product Qualification, Documents for EVT, DVT &
PVT, Design Release, Production Support, RCA, Trouble Shooting, ECN, test lab setup.
End to End solution- Starting from Incubation stage to final delivery for NPI/NPD projects, Cost reduction & Quality
improvement projects, Product Life cycle management.
Project management, Product Specification, Project Estimation, Technical Review, Project Presentation, Projects Road map.
Interaction with customers, Cross functional team, and Suppliers.
Define KPI for team and review the performance appraisal.
Designing and validate the project as per Indian & International Industrial and MIL Quality Standards (IEC, CISPR, British,
Penta five 55555, IP65, IP67 etc.). Also used quality tools Six Sigma, DFMEA, 5S, waste analysis and lean management etc.
Domain Skills

Software/Hardware : IoT, Hardware Design, Analog & Digital Design, RF, Embedded C & Assembly, RTOS, PCB.
Microcontroller/Processor : ARM Processor, ARM-Cortex M, Microchip, NXP, ATMEL, TI, Renesas, ESP32 ( 8,16,32 Bit).
IDE : MPLABX IDE, MPLAB V8.83 IDE, IAR, Keil, Code Warrior & GCC compiler.
Wireless Communication : GSM, GPRS, GPS Receiver, WiFi, Zigbee, Bluetooth, LoRa, RF, FTP, FOTA-implementation.
Peripheral Interfaces : UART, RS232, RS485, SPI, I2C, Ethernet-RJ45, POE, USB, RGB, LVDS, PWM, LCD, RTC,
FLASH, EEPROM, ADC, LED, Seven segment, Solar, Port & Devices Battery, LDR, Micro-SD Card, GPIO.
Sensors Interfaces : Temperature, Humidity, Rain gauge, Air quality, Loadcell, Pressure Sensors, PIR, Lightning sensor
Project Management tools : Microsoft Project Management (PMO), Project Planning, Project scheduling,
Operating System : Windows and Linux, Documentation Software- Microsoft Office (Power Point, Excel and Word)
Organisational Experience

• PT Communication, Greater Noida as a Technical Lead (DGM- Project Management) from March, 2023 to till date.
• Havells India Ltd. Noida as a Sr. Manager (R&D) from May, 2019 to March, 2023.
• Skymet Weather Services Pvt Ltd. Noida as a Sr. Manager (R&D). March, 2018 to March, 2019.
• Bhartiya Cutler Hammer (BCH) Electric LTD. Faridabad as a Manager (R&D); Jan,2014 to March, 2018 (4.3 years).
• Autometers Alliance Ltd. Noida as an Engg. (Leading Team) in R&D. from Jan,2007 to April,2012 (5.3 years).
• Avery India Ltd., Faridabad as an Engg. in R&D Electronics. From Oct-2004 to Jan-2007 (2.3 years).
• Associated Electronics research & foundation (AERF Salora), Noida as an Asst. Engg (R&D). Nov,2002 to Sep,2004.
 OCCUPATIONAL CONTOUR
FROM March, 2023 to till date: PT Communication, Greater Noida
PT Communication : PT Communication is an engineering company engaged in the manufacturing of very high technologically
oriented products for Railway and Metro application. Reporting Officer : GM
Responsibilities: Project management, NPI/NPD, IoT, Hardware
PROJECTS:
A) RRCS : The Retractable Rigid catenary system (also known as RRCS) for the use in metro car sheds, Railway Workshops
and loco sheds for obstruction free inspection & maintenance work on the roof of the Rolling stocks.

FROM May, 2019 to March, 2023: Havells India Ltd. Noida

Havells India : Havells India Limited is a leading fast moving electrical goods (FMEG) company and a major power
distribution equipment manufacturer with a strong global presence. Reporting Officer : Sr. GM
Responsibilities: Sr. Manager (R&D)- Project management, NPI/NPD, IoT, Hardware, Firmware
PROJECTS:
B) Smart H : Wireless Home Automation (IOT based)
Smart H is modular home automation ranged with Relay switch, smart socket, dimmer switch, fan regulator and sensors
which are being controlled by multiple options – Capacitive Touch, App, remote and Alexa voice control. C) Smart WiFi
Touch switches & Monoblock solutions:
Smart Touch switches is designed for 4 channel controller, 2 channel controller, 30A Switch, 2 way switch, Curtain
controller, IR emitter, Bell push switch, dimmer switch and 8 steps fan regulator, which are being controlled by multiple
options –Capacitive Touch, Mobile App, remote control
Devices & protocols- WiFi ESP32, CY8CMBR3108, Relay, LED, WiFi, BLE, Zigbee, I2C etc.
D) Smart Socket:
Smart Socket Adapter a WiFi enable connected product which can be used Power ON/OFF house appliances i.e.
Geyser, AC, Water pump, TV, Air Cooler etc. Smart socket is designed for 6A & 16A. Devices- WiFi
ESP32-S2 wroom, Relay, LED, WiFi, I2C etc.
E) Fan Regulator 8+1: (Patent filed)
First universal rotary fan regulator is developed. Fan Regulator 8+1, giving more options to select the desired speed,
uniform speed at each step, full 360° rotation, soft operation, hum free and suitable for high and low speed fan. Design
is filed for patent.
F) BLDC Fan regulator: BLDC Fan Regulator are designed for 5 steps regulator for brush less DC fans.
G) i) GaN USB Charger adaptor & Socket 65W (1C & 2C+1A) with All protocol PD3.0,PPS & QC4.0 etc.
ii) GaN 30W & 18W Charger adaptor & Socket with all protocol PD3.0, PPS & QC4.0
etc. iii) USB 2.1A & 3.2A (Adaptor, socket & Spikeguard extension) iv) Car charger
30W (1C & 1C+1A)- with All protocol PD3.0,PPS & QC4.0 etc.
H) Data Cables- A to Micro, A to C , C to C & Lightning Cables up to 100W rating
Other Products- PIR sensors, Microwave sensors, WiFi doorbells, IR Emitter, IR based touch switches, VDP, L0 products,
Smart extension, Fan regulator 4 steps & 5 steps, Doorbells IC base single tone & multi tone, Wireless doorbells, USB with
socket, Footlight 2M & 4M, Buzzer, Dimmer, Call bell indicator, Chime, EKT, water level alarm and AQI Devices etc. have
been completed and running successfully in field.

FROM Mar, 2018 to Mar, 2019 : Skymet Weather Services Pvt, Ltd., Noida
Skymet Weather : Skymet provides weather forecast and Weather Monitoring, UAV & Remote Sensing, Crop Surveillance,
Instrumentation, Renewable Energy, Power etc. Reporting Officer : CEO
Responsibilities : Sr. Manager (R&D)- Project management, NPI/NPD, IoT, Hardware, Firmware,
SDLC Team Members : 12 (5- Hardware Engg., 5- Firmware Engg & 2- Testing &Technicians)
PROJECTS:
A) Air pollution monitoring system (IOT based)
System measures PM1, PM2.5, PM10 in μg/m3 and online data transmit by GPRS. Designing the Electronics hardware
& writing the firmware with Microchip & NXP solution.
Calibration: Device is calibrated against a BAM, Met One instruments inc. BAM (Beta attenuation monitor) to provide
most accurate results. Power Voltage: Solar Power/ 220VAC./ Laptop USB/Car USB.
 Devices: Microchip PIC18F45K20,Quectel MC60GSM/GPRS and GPS module, Air pollution sensor, LCD Display,
solar, Li-ion battery, PWM, EEPROM, Max232, RTC, Pollution Indication by LED color coding etc.
Protocols:
3GPP GSM/GPRS, UART, RS-232and SPI etc.
B) Smart automatic weather station (AWS) for measurement of Temperature, Humidity, Rain Gauge, wind speed and wind
direction, Lightning, Air pollution sensor. Designing the electronics hardware & writing the firmware.
Devices: Microchip PIC18F45K22, Quectel MC60 (GSM/GPRS &GPS), RTC, EEPROM, LCD, Temperature,
Humidity, Rain Gauge, Wind speed and Wind direction, Lightning, Air pollution sensor. Protocols: 3GPP GSM/GPRS,
UART, RS-232, RS485 and SPI etc.

FROM JAN, 2014 to MAR, 2018: Bhartiya Cutler Hammer (BCH) Electric LTD., Faridabad
BCH Electric: Company is well recognized in switch gear, electrical and electronic in India. It was established in 1965 as a
joint venture between Cutler-Hammer, USA, and Indian partners. Since 1977, it is a wholly owned Indian company.
Reporting Officer: AGM - (R&D Head)
Responsibilities : Manager (R&D)- Project management, NPI/NPD, IoT, Hardware, Firmware, SDLC
Team Members : 6 (3- Hardware Engg, 2- Firmware Engg, 1- Testing Technicians) PROJECTS:
A) Smart Starter (DOL and Start Delta motor Starter)
Design the GSM-GPRS unit, which is being remotely controlled by mobile phone, IVRS and web app. Designing the
Electronics Hardware & writing the Firmware with Microchip solution
Devices: Microchip PIC18F46K22, ATMEL EEPROM, GSM/GPRS module Quectel M95, Max232 etc.
Protocols: 3GPP GSM/GPRS, FTP, RS-232 and SPI,FOTA,FTP etc.
B) Star Delta Timer, Agro Timer, Programmable timer (ON delay, Off delay, Cyclic & Multi function) Designing the
Electronics Hardware & writing the Firmware with Microchip solution.
Devices: Microcontroller PIC18F23k20, Solid state relay, slide switch
C) Electronics MCCB: For 400 & 600AC load
Design verification, functional testing, EMI/EMC, Software modification, post production support Devices:
Microcontroller TI MSP430
D) Single phase preventer (SPP): Designing the Electronics for single phasing, phase unbalance, phase reversal. Devices:
Solid state relay, 555 Timer, LED
E) LGPV LED indication Designing the Electronics hardware for 110VAC, 220VAC, 415VAC variant

JAN’2007 to APRL, 2012: AUTOMETERS ALLIANCE LTD. Noida as Engineer (R&D)

Reporting Officer: AGM - (R&D Head)
Responsibilities : Engineer - Firmware & Electronics.
Team Members : 3 (1- Hardware Engg, 1- Firmware Engg, 1- Testing Technicians) PROJECTS:
A) Loco Surveillance System
GSM,GPRS technology is used for wireless transfer of data & GPS is used for finding the location of the running train.
Designing the Electronics Hardware & writing the Firmware with Microchip solution
Devices: Microcontroller ARM Cortex LM3S9B92 , GSM-GPRS module, GPS module, LCD display, Flash Memory.
Protocols: GSM/GPRS, GPS, RS-232, RS-485 and I2C.
B) Vigilance Control Device (VCD)
System is designed for driver alertness. Designing the Electronics hardware& writing the firmware
Devices & Protocols: Microcontroller P89C51RD2, LCD display, EEPROM, LED, Buzzer, UART, RS232, RS485, SPI.
C) Passenger Information Display System
It is a LED based passenger information digital display system. Measure parameters like Train No/Bus Rout No, Next
arrival station, Expected Time Arrival are displayed for passenger assistance. Designing the Electronics hardware&
writing the firmware.
Devices & Protocols: GPS receiver, Microchip Microcontroller, RS232, EEPROM, LED, UART, RS-232, SPI etc.
D) Tachograph & Recording System
Digital Display using tachograph and seven segment display to show the speed in digits. Designing the electronics
hardware & writing the firmware
Devices & Protocols: Microcontroller, tachograph, seven segment display, flash memory, LED, RS-232, RS-485, SPI.
 OCT’04 – JAN’07: AVERY INDIA LTD, FARIDABAD as Engineer (R & D)
Reporting Officer: Senior Manager - (R&D)
Responsibilities : Engineer - Firmware & Electronics.
Team Members : 3 (1- Hardware Engg, 1- Firmware Engg, 1- Testing Technicians) PROJECTS:
A) Weighing in Motion: Measured the weight of wagon while the train is in running condition. Designing the Electronics
hardware & writing the firmware
Devices & Protocols: Microcontroller AT89S52, Embedded C & Assembly, Keil Compiler & Assembler, ADC, Load
cells Sensors, EEPROM, Keypad, LCD, RTC, and RS-232.
B) Industrial Weighing Scale 100kg x 40gm: Embedded architecture design and writing the firmware.
Devices & Protocols: Microcontroller AT89S52, Embedded C & Assembly, Keil Compiler & Assembler, ADC,
Loadcells Sensors, EEPROM, Keypad.
C) Jumbo display: Remote display for weighing. Designing the electronics hardware & writing the firmware. Devices
& Protocols: Microcontroller AT89C51, RS485, Seven segment, UART, RS485

NOV’2002 – SEP’2004: AERF (SALORA), NOIDA as Asst. Engineer (R & D)

Reporting Officer: Manager - (R&D)

Responsibilities : Asst. Engineer- Electronics.
Team Members : 3 (1- Hardware Engg, 1- Firmware Engg, 1- Testing Technicians) PROJECTS:
A) Cold storage temperature controller: Device is measured and controls the temperature of cold storage. Interface with
remote LED display and SMS alertness. Designing the electronics hardware & writing the firmware.
Devices & Protocols: ATMEL AT89S52, SIMCOM SIM900, RS232, LED display, LCD, UART, RS-232, RS485
LED solutions: LED display, LED circuit design, constant current and constant voltage design, solar based LED design,
battery operated LED design, Microcontroller/Software based LED color controlling, LED Indication

PERSONNEL DETAIL

Current Address : A-581, Sector-46, Noida, U.P.

Date of Birth : 01stJune, 1979.
SEX /Marital Status : Male / Married
Linguistic Abilities : English & Hindi
Passport No. : T2113755