Scribd
Upload
50 views

Bc-Prime DP

Uploaded by

razcrete24
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

Bc-Prime DP

Uploaded by

razcrete24
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Your Perfect Flooring Solutions

BC-PRIME DP
A SOLVENT FREE TWO PART DAMP CURE EPOXY PRIMER

DESCRIPTION: BENEFITS:
BC-Prime DP is a two - component solvent free  Extremely good adhesion on damp concrete surfaces.
pigmented damp proof under water cured epoxy primer  Compatible with wide range of topcoats.
with medium viscosity, fast cure excellent adhesion  Low odor during application.
properties even into damp concrete substrate.  Damp tolerant with moisture when during application
 Deep penetrating into concrete substrate to avoid peeling
PRODUCT FEATURE:  Fast Cured
BC-Prime DP is recommended as a primer for concrete
surface prior to application of concrete substrate, COLORS:
membranes, mortar or topping, tiles. Exhibit excellent  Standard: Off White
adhesions with wide range of topcoats.

TECHNICAL DATA
Density ( 28°C ) g/cm² (mixed) 1.10±0.1g/cm²
Adhesive strength >2.0MPa
(concrete failure)
Number of Coats 1
Recommended D.F.T. per coat 180µ(+/-)30µ
Cleaner BC- WS Thinner
Mixing Ratio by Weight (Off White) Part A : Part B
7.5 : 2.5
Pot life (working time) 28⁰C 40min
Packing Size 10kg
Shelf life & storage 24 months
(unopened and in good conditions
temperature 5⁰C to 30⁰C)
Touch Dry (28°C) 3 hours
Foot traffic (Good Ventilation) (28⁰C) 6 hours
Material Consumption 0.2kg/m²
Your Perfect Flooring Solutions

BC-PRIME DP
A SOLVENT FREE TWO PART DAMP CURE EPOXY PRIMER

SUBSTRATE REQUIREMENT & PREPARATION: Maintenance and care after cure :


 Substrate concrete or screed should be a minimum of We recommend basic cleaning and maintenance will prolong
compressive strength 25N/mm² and adhesive pull-off the life of epoxy floors, clean regularly using a single or double
strength of minimum 1.5N/mm² ( concrete failure ) headed rotary scrubber drier in conjunction with alkaline
 Concrete substrates must be prepared mechanically using detergent.
abrasive blast cleaning or scarifying equipment to remove
cement laitance and achieve an open textured surface. Further Information:
 Crack and hollows should be properly remedied. Warning and precautions information relating to the safe
 Rough contaminations and high spots can be removed by handling of this product should be found in Material Safety
grinding. Data Sheet. To be advise to put on suitable clothing and eye-
 The substrate should be clean and free from laitance, oil, ware for protection purpose. The application area/site must be
dust, paint residues, algae, loose and friable material must in good ventilation otherwise advisable to use a portable
be completely removed from all surfaces before application exhaust fan.
of the product.
Important Note:
MIXING: Best Crete product are warranty against defective materials.
Stir Part A mix for 30 seconds by using a suitable electrical Due to different substrate and working conditions, no guarantee
stirrer ( with 750 watt high power mixer ), then pour all of Part of an application result or any liability claims. The users are
B into the Part A container and mix both liquid part thoroughly required to have a test ahead based on their intended use.
for two minute until a fully homogenous mix has been
achieved.

APPLICATION:
 Apply BC-Prime DP can be use by suitable roller, brush or
trowel and overwork with a roller.
 BC-Prime DP should apply within the pot life 40 minutes
at 28ᵒC.
 Substrate temperature should not apply 5ᵒC above the dew
point.

CLEANING OF TOOLS:
Clean all the tools and application equipment with BC-
Washing thinner before the product hardens.

BEST CRETE (M) SDN BHD (969553-A) (GST/BCP NO: 001222787072),


NO.1, JALAN PERUSAHAAN 21/KS5, KAWASAN PERINDUSTRIAN KAMPUNG IDAMAN, 42000 PELABUHAN KLANG, SELANGOR DARUL EHSAN, MALAYSIA,
TEL: +603-3167 1263, +603-3168 1263, +603-3162 5044 FAX: +603-3166 2263,
EMAIL: [email protected] WEBSITE: www.bestcretepolymers.com

You might also like