Error memory

Date: 06/06/24, 13 19
VIN: 98M3B100XF4A18586

01 Crash Safety Module

2 errors

930AA1: Supply voltage: undervoltage

930BB9: Error memory locked

10 Central Gateway Module

3 errors

CD0487: Synchronization process failed, CC was not yet synchronized when the error
memory lock was released

801C15: Failed to fall asleep at 30B

801C20: Central fault memory full

12 Digital Motor Electronics

8 errors

CDA451: FlexRay, message (actual steering torque driver actuator, 49.0.2): missing

CDA452: FlexRay, message (Is power rack, 49.0.2): missing

CD8E12: LIN, communication (generator): missing

1A2004: Electric fan, control line: line interruption

1A2002: Electric fan, control line: short circuit to ground

CD8F01: LIN, communication (intelligent battery sensor): missing

1
:
CD944D: FlexRay, message (actual wheel speed, 46.0.1): Signal error

1B0A21: Rough road detection: No wheel speed signal received

18 Electronic transmission control

2 errors

CF2F02: DSC interface: (Actual wheel speed HL / VL / HR / VR, 0x254) Signal invalid

420665: Switch paddle: (operation switch paddle, 0x207) signal invalid

1C Integrated Chassis Management

16 errors

482795: Level sensors - rear left - out of specification

480134: SBS function - direction of travel unsafe with vx greater than 2 m / s

D01C0C: Message error (actual rack force, ID: AVL_FORC_GRD) - timeout

D01C0E: Message error (actual rack force, ID: AVL_FORC_GRD) - Alive

D02C24: Signal error (actual rack force, ID: AVL_FORC_GRD) - Invalid

D01B26: Message error (actual position EPS, ID: AVL_PO_EPS) - timeout

D01B28: Message error (actual position EPS, ID: AVL_PO_EPS) - Alive

D014A1: Signal error (actual position EPS, ID: AVL_PO_EPS) qualifier

D017A3: Signal error (actual number of encoder edges wheel, ID: AVL_QUAN_EES_WHL)
- Invalid

D017C5: Signal error (actual wheel speed, ID: AVL_RPM_WHL) - Invalid

D017C6: Signal error (actual wheel speed, ID: AVL_RPM_WHL) - Undefined

D019BF: Message error (actual steering torque driver actuator, ID: AVL_STMOM_DV_ACT)
- Timeout

2
D019C1: Message error (actual steering torque driver actuator, ID: AVL_STMOM_DV_ACT)
- Alive

D02D07: Signal error (actual steering torque driver actuator, ID:

AVL_STMOM_DV_ACT) qualifier

D016A5: Message error (display Checkcontrol driving dynamics 02, ID:

DISP_CC_DRDY_02) - timeout

D015C4: Message error (status of electric steering front axle, ID: ST_EST) - timeout

29 Dynamic stability control

5 errors

48071C: DSC pump - supply voltage

D36D58: Signal error (wheel torque drive 1, ID: WMOM_DRV_1) - qualifier

480AAA: Wheel Speed Sensor - Rear Left - Wrong sensor type

480718: Wheel Speed Sensor - Rear Left - Electrical Failure

480AAD: Wheel Speed Sensor - Rear Left - Noise Monitoring

30 Electromechanical power steering

5 errors

482394: Sensor - rotor position - steering angle - loss of multiturn value

D52C79: Signal error (voltage on board network, ID: U_BN) Sender: DME1 - Invalid

4823FC: Power supply - Local undervoltage Reduction of steering assistance

4823FD: Power supply - Local undervoltage, shutdown of steering assistance

4823D4: Power supply - global undervoltage

40 Front electronic module

11 errors
3
030410: Multifunction steering wheel (MFL): missing LIN slave

80402F: Battery deep discharged

8041A8: Welcome Light repeat lock active

8041B2: Light active: start capability limit reached

8041B6: Headlight range control (LWR): System failed

804398: AUC sensor: short circuit to positive or open circuit

804399: AUC sensor: Invalid PWM signal

8044B0: Shift paddles: Short circuit to positive or open circuit

D90D16: Control unit light (BEL), (LIN): wrong variant installed

D90D28: RLS (LIN slave): wrong variant installed

D90D37: Interior light unit (ILE): Incorrect variant installed

43 Frontal Light Electronics Left

1 error

8059BD: Undervoltage detected

44 Frontal Light Electronics Right

1 error

805B37: Undervoltage detected

56 Roof function center

5 errors

801A02: Coding: Control unit is not coded

801A07: Coding: Coding does not match the vehicle

4
801A55: Theft alarm system: Alarm - details in the alarm memory

03021E: SHD: Motor control not possible, no voltage at the relay input

801A38: Undervoltage detected

5E Gear selector switch

1 error

802680: Function display incorrect

61 Telematic Communication Box

2 errors

B7F318: Emergency LED error

B7F31A: Emergency call button: interruption

63 Headunit Basis

6 errors

B7F825: Speaker output lines front right: line interruption

B7F829: Loudspeaker output lines, rear left: line interruption

B7F82D: Speaker output cables rear right: line interruption

B7F84E: Connection Head-Unit to the microphone 1: Short to positive

B7F86B: External undervoltage

B7F8C6: Brightness reduction due to overtemperature (overtemperature: brightness

reduction backlight)

6D Seat module, driver

5
1 error

8029D4: Undervoltage detected

72 Rear electronic module

9 errors

8031D9: On-board voltage too low

804811: Supply undervoltage 8V5

804833: ZSG game protection: wake-up inputs blocked

804872: Output BL_L defective

804874: Output BL_R defective

804876: FRA_H_L output defective

804877: FRA_H_R output defective

80487F: Output NSL_L defective

804880: Output NSL_R defective

78 Integrated automatic heating / air conditioning system

9 errors

801181: Motor defrost or central drive: internal motor fault

8011B9: Stratification potentiometer: short circuit to plus or interruption

8011C1: External FBM and audio control panel: key clip detected

80120D: Undervoltage detected

801237: Rear window heating: Reduction of heating output due to power management

E71448: Message (STAT_SENSOR_AUC, 0x2D0, FA): DT_SEN_AUC invalid signal

E70C2D: AC-LIN: Fan output stage does not answer

6
E71470: Message (ST_CHGINTF, 0x3B4, FA): Timeout

E71472: Message (CHGNG_ST, 0x3E9, FA): Timeout