27/1/23, 00:50 Wire Insulation Types and Purposes Explained

Home » JEM Electronics Blog » Wire Insulation Types and Purposes Explained

Wire Insulation Types and Purposes Explained

Posted May 06, 2020

There are as many varieties of wire and cable insulation

as there are wires and cables. Insulation is an important
non-conductive material that surrounds and protects the
individual wires or cables that make up a cable
assembly. Some wire insulation is produced to resist
electric current in electrical applications. Other types of
insulation are used in dielectric applications for radio
frequency cables. Insulation further prevents current
from contact with other conductors, resists electrical leakage and offers protection from all
environmental conditions. Depending on the application, insulation generally is from
plastic, fluoropolymers or rubber materials.

Different Types of Insulation:

Plastic
Polyvinyl Chloride (PVC) is known for its diverse applications. With a temperature range
between -55°C and 105°C, it is flame, moisture, and abrasion resistant. Its applications are

Integrado en HubSpot

https://blog.jemelectronics.com/wire-insulation-types-explained 1/5
27/1/23, 00:50 Wire Insulation Types and Purposes Explained

compatible with gasoline, ozone, acids, and solvents, and it is safe for medical and food
related purposes as it is odorless, tasteless, and non-toxic.

Semi-Rigid PVC (SR-PVC) is used as a primary insulation where very abrasive resistance is
required. As well as being flame retardant, semi-rigid PVC also resists heat, water, acid, and
alkali.

Plenum Polyvinyl Chloride (Plenum PVC) is another type of PVC wire insulation material.
Applications are suited for interiors in spaces beneath raised floors of above dropped
ceilings or raised floors, primarily areas with air circulation.

Polyethylene (PE) is a dense, inflexible material that is used mostly for insulating coaxial
and low capacitance cables. Though flammable, it carries exemplary electric qualities, can
reduce the dielectric constant, and is a very good option for cables requiring high-speed
transmission. With cross-linking, polyethylene properties can produce high resistance to
cracking, cut-through, soldering, and solvents. Its temperature range is -65°C to 80°C.

Polypropylene (PP); with properties similar to polyethylene, with a temperature range of

30°C to 80°C, this wire material is used in interiors, primarily within thin walls.

Polyurethane (PUR) has an exceptional temperature range (-62°C to 93°C), is tough and
flexible with a very good flex life. Resistant to chemicals, water, and abrasion, it works well
in retractile cord applications, as well as in marine and low-temperature environments.

Chlorinated Polyethylene (CPE); with very good heat, oil, and weather resistance, this
insulation is commonly found in power and control cable applications, industrial power
plant applications, and CPE cable insulation displays.

Nylon is known for its flexibility and abrasion, cut-through, and chemical resistant
properties. As an application, it is usually extruded over softer insulation compounds.

Rubber
Rubber refers to both natural rubber (NR) and synthetic SBR compounds. Though this
material has poor oil and ozone resistance, it has good low-temperature flexibility, offers
good water and alcohol resistance, electrical properties and excellent abrasion resistance.

Thermoplastic Rubber (TPR) is used in applications that require higher processing speeds
and a wider usable temperature range. It has excellent heat, weather and age resistance
but limited cut-through resistance.

Neoprene (Polychloroprene) is a thermoset rubber with exceptional abrasion, cut-

through, oil has a long service life, wide temperature
and solvent resistance. Neoprene
https://blog.jemelectronics.com/wire-insulation-types-explained 2/5
27/1/23, 00:50 Wire Insulation Types and Purposes Explained

range, is flame retardant and self-extinguishing.

Styrene Butadiene Rubber (SBR) is another thermoset rubber with similar properties as
neoprene. With a temperature range of -50°C to 90°C, SBR is used primarily in Mil-C-55668
cables.

Silicone is a versatile synthetic rubber known for its high heat-resistant and flame-
retardant properties (180°C). It is extremely flexible with average abrasion-resistance, and
is ideal with many electrical applications.

Fiberglass is the most widely used glass insulation. With continuous working temperatures
up to 482°C, the material has very good moisture and chemical resistance, but low
abrasion resistance. It’s commonly used in applications for heat treating, glass and ceramic
kilns, foundries and aluminum processing.

Ethylene Propylene Rubber (EPR) has excellent thermal and electrical properties, and is
commonly used in high-voltage cables. The material is soft and flexible, and offers very
good resistance to heat, oxidation, weathering, water, acid, alcohol and alkali. It also has an
operating temperature range of -50°C to 160°C. Due to its softness and flexibility, it should
be handled with care during installation.

Chlorosulfonated Polyethylene (CSPE) (aka Hypalon) provides low-voltage insulation. It

has chemical and UV resistant properties, works in a wide temperature range, and is found
in appliance wire, lead wire, coil leads, transformer leads and motor lead wire.

Ethylene Propylene Diene Monomer (EPDM) offers excellent heat, ozone, weather, and
abrasion resistance. It has excellent electrical properties, good dielectric strength, and
retains excellent flexibility in temperature application ranges from -55°C to 150°C.

Fluoropolymer
PFA; with a temperature ratings range of -65°C to 250°C, PFA is suitable for high and low
temperature applications. It has superior mechanical strength, and its very low dissipation
factor makes it an electrically efficient option. PFA is an expensive material.

Polytetrafluoroethylene (PTFE) is an extremely flexible, and water, oil, chemical, and heat
resistant thermoplastic material. Its applications service a wide temperature range of -73°C
to 204°C.

Fluorinated Ethylene Propylene (FEP) is a highly flame-resistant material. When foamed,

it improves data transmission, which also improves pricing and processing. It is commonly
used in plenum cable and military applications.
 
https://blog.jemelectronics.com/wire-insulation-types-explained 3/5
27/1/23, 00:50 Wire Insulation Types and Purposes Explained

ETFE and ECTFE Halar materials offer more strength and flexibility than PFA or FEP and,
when irradiated, can become thermoset. Foaming the material reduces weight and
improves data transmission. However, the materials lack the electrical advantages offered
by FEP.

Polyvinylidene Fluoride (PVDF) (aka Kynar) is a flexible, lightweight and thermally stable
insulation material with chemical, heat, weather, abrasion, and fire resistant properties. Its
relatively low-cost makes it an insulation option for a wide range of industries and
applications. Its UL standard 910 Plenum Cable Flame Test rating deem it suitable for
application in a building space requiring air circulation necessary for dropped ceilings or
raised floors.

Questions About Wire Insulation Types?

Stay Up to Date on Industry Insights and Company News!

Email*

SUBSCRIBE

Recent Posts

 
https://blog.jemelectronics.com/wire-insulation-types-explained 4/5
27/1/23, 00:50 Wire Insulation Types and Purposes Explained

REQUEST A QUOTE 

JEM stands out from other companies in the industry because of our:

On-Time Delivery and Cost Effectiveness | LEAN Manufacturing |

Commitment to Total Quality

Jem Electronics, Inc. - United States Cable Assembly, 23 National Drive Franklin, MA 02038

| | | Phone: (888) 612-6035 | Privacy Policy | Sitemap

 
https://blog.jemelectronics.com/wire-insulation-types-explained 5/5