OWNER’S MANUAL

DVD MINI
HI-FI SYSTEM
Please read this manual carefully before operating your set and retain it for future
reference.

MODEL
CL65D (CL65D, CLS65F)

www.lg.com
2003_Rev03 Copyright © 2019-2023 LG Electronics Inc. All Rights Reserved.
 2 Getting Started

Safety Information
CAUTION
1 RISK OF ELECTRIC SHOCK
DO NOT OPEN
Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC CAUTION: This product employs a Laser System.
SHOCK DO NOT REMOVE COVER (OR BACK) To ensure proper use of this product, please read
NO USER-SERVICEABLE PARTS INSIDE REFER this owner’s manual carefully and retain it for future
SERVICING TO QUALIFIED SERVICE PERSONNEL. reference. Shall the unit require maintenance, contact
an authorized service center.
This lightning flash with arrowhead Use of controls, adjustments or the performance of
symbol within an equilateral procedures other than those specified herein may
triangle is intended to alert the result in hazardous radiation exposure. To prevent
user to the presence of uninsulated direct exposure to laser beam, do not try to open the
dangerous voltage within the enclosure.
product’s enclosure that may be of
CAUTION: Do not block any ventilation openings.
sufficient magnitude to constitute
Install in accordance with the manufacturer’s
a risk of electric shock to persons.
instructions.
The exclamation point within an Slots and openings in the cabinet are provided
equilateral triangle is intended for ventilation and to ensure reliable operation of
to alert the user to the presence the product and to protect it from over heating.
of important operating and The openings should never be blocked by placing
maintenance (servicing) the product on a bed, sofa, rug or other similar
instructions in the literature surface. This product should not be placed in a built-
accompanying the product. in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK instruction has been adhered to.
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN NOTICE: For safety marking information including
OR MOISTURE. product identification and supply ratings, please refer
CAUTION: The apparatus should not be exposed to to the main label on the bottom or the other surface
water (dripping or splashing) and no objects filled of the product.
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
 Getting Started 3

CAUTION concerning the Power Cord CAUTION: No naked flame sources, such as lighted
The Power Plug is the disconnecting device. In case candles, should be placed on the apparatus.
of an emergency, the Power Plug must remain readily
accessible. Symbols
Check the specification page of this owner’s manual 1
to be certain of the current requirements. ~ Refers to alternating current (AC).

Getting Started
Do not overload wall outlets. Overloaded wall outlets, 0 Refers to direct current (DC).
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation Refers to class II equipment.
are dangerous. Any of these conditions could result
1 Refers to stand-by.
in electric shock or fire. Periodically examine the
cord of your device, and if its appearance indicates ! Refers to “ON” (power).
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact Refers to dangerous voltage.
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
CAUTION: Be careful to make sure children do not
put their hands or any objects into the *speaker duct.
* speaker duct : A hole for plentiful bass sound on
speaker cabinet (enclosure)
4 Table of Contents

Table of Contents

1 Getting Started 3 System Setting

2 Safety Information 21 Adjust the setup settings
6 Unique Features 21 – OSD Initial language settings - Optional
7 Introduction 21 – To display and exit the Setup menu
7 – Playable Discs 22 – Language
7 – About the “7” Symbol Display 22 – Display
7 – Symbols Used in this Manual 23 – Audio
7 – Regional Codes 24 – Lock (Parental Control)
8 Playable file Requirement
8 – Music file requirement
8 – Photo file requirement
4 Operating
9 – Video file requirement 25 Using the Home Menu
9 – Compatible USB Devices 26 Basic Operations on Disc
9 – USB device requirement 27 Advanced Operations on Disc
10 Remote control 27 – Displaying Disc Information
12 Front panel on-screen
14 Rear panel 27 – To display the DVD Menu
27 – To display the DVD title
27 – 1.5 times speed playback
2 Connecting
27 – Screen Saver
16 Connections to Your TV 28 – Starting play from selected time
16 – HDMI Out Connection 28 – Resume playback
17 – Resolution Setting 28 – Changing subtitle code page
18 Connecting to speakers 29 – Marked Playback
18 – Attaching the speakers to the unit 30 – Viewing a PHOTO file
18 – Attaching the speaker light cables to the 31 Basic Operations on USB
unit 32 – Selecting a folder and
19 Optional Equipment Connection an MP3/WMA file
19 – AUX IN 1 Connection 33 – Deleting a file/folder or format
19 – AUX IN 2 Connection 34 Advanced Operations on USB
20 – USB Connection 34 – JUKE BOX Playback
20 – Antenna Connection 35 Playback Effect
35 – AUTO DJ
 Table of Contents 5

36 Using BLUETOOTH® wireless technology 5 Troubleshooting 1

36 – Listening to music stored on the Bluetooth
devices 54 Troubleshooting
39 Using the LG XBOOM App 54 – General
39 – About “LG XBOOM” App 55 – NOTES to release Demo mode
39 – Install “LG XBOOM” App onto Your 2
Bluetooth Device 6 Appendix
40 – Activate Bluetooth with “LG XBOOM” App
41 Radio Operations 56 Controlling a TV with the Supplied Remote
41 – Listening to the radio Control
41 – Improving poor FM reception 56 – Setting up the remote to control your TV 3
41 – Presetting the Radio Stations 57 Area Code List
41 – Deleting all the saved stations 58 Language code List
42 Sound adjustment 59 Trademarks and Licenses
42 – Setting the sound mode 60 Maintenance
43 Advanced Operations 60 – Notes on Discs 4
43 – Recording to USB 60 – Handling the Unit
45 Other Operations 61 Specifications
45 – Turn off the sound temporarily 62 Speakers specifications
45 – DEMO
45 – Resume stop 5
45 – CHILDSAFE Mode
45 – Last Scene Memory
45 – Power Resume - Optional
45 – System Select - Optional
46 – Using Microphone 6
48 – LIGHTING
49 – Sleep Timer Setting
49 – Dimmer
50 – AUTO POWER On
50 – Auto function change
51 Setting the Clock
51 – Setting the Clock through “LG XBOOM” App
51 – Using your player as an alarm clock
52 LG Sound Sync
53 WIRELESS PARTY LINK Connection
 6 Getting Started

Unique Features
BLUETOOTH®
1
Listens to music stored on your Bluetooth device.
Getting Started

AUTO DJ
Blends the end of one song into the beginning of
another for seamless playback.

USB Direct Recording

Records music to your USB device.

LG XBOOM
LG XBOOM is an app designed to let you take control
of some of LG’s latest audio devices.
(Page 39-40)

LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.

Full HD up-scaling
Views Full HD picture quality with simple setup.
 Getting Started 7

Introduction Symbols Used in this Manual

r DVD-Video, DVD±R/RW in Video
mode or VR mode and finalized
Playable Discs 1
This unit plays DVD±R/RW and CD-R/RW that
t Audio CDs

Getting Started
contains audio titles, MP3, WMA and/or JPEG files.
Some DVD±RW/DVD±R or CD-RW/CD-R cannot be y Video files contained in the Disc
played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of u Audio files contained in the Disc
the recording device and authoring software.

DVD-VIDEO (8 cm/12 cm disc)

i Photo files contained in the Disc

Discs such as movies that can be

purchased or rented. ,,Note
DVD±R (8 cm/12 cm disc) Indicates special notes and operating features.
Video mode and finalized only. >>Caution
DVD-RW (8 cm/12 cm disc) Indicates cautions for preventing possible damages
Video mode and finalized only. from abuse.

DVD+R: Video mode only

Supports the double layer disc also.
Regional Codes
This unit has a regional code printed on the rear of
DVD+RW (8 cm/12 cm disc) the unit. This unit can play only DVD discs labeled
Video mode and finalized only. same as the rear of the unit or “ALL”.
Audio CD: Music CDs or CD-R/CD- yy Most DVD discs have a globe with one or more
RW in music CD format that can be numbers in it clearly visible on the cover. This
purchased. number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
About the “7” Symbol Display code from your unit, the message “Check Regional
“7” may appear on your TV display during operation Code” appears on the TV screen.
and indicates that the function explained in this
owner’s manual is not available on that specific
media.
 8 Getting Started

Playable file Photo file requirement

Requirement Photo file compatibility with this unit is limited as
follows:
1 yy Max pixel in width: 2760 x 2048 pixel
yy Maximum files: Under 999
Music file requirement
Getting Started

yy Some discs may not operate due to a different

MP3/WMA file compatibility with this unit is limited recording format or the condition of disc.
as follows.
yy Sampling frequency: within 32 to 48 kHz (MP3), yy File extensions: “.jpg”
within 32 to 48 kHz (WMA) yy CD-ROM file format: ISO9660/ JOLIET
yy Bit rate: within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Support Version: v2, v7, v8, v9
yy Maximum files: Disc: 999 / USB: 2,000
yy Maximum folders : Disc: 99 / USB: 200
yy File extensions: “.mp3”/ “.wma”
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
yy CD-ROM file format: ISO 9660/ JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy A protected file by DRM (Digital rights
management) cannot be played on the unit.
yy The DTS disc is not supported.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System: Disc format system for
Windows Vista)
 Getting Started 9

Video file requirement Compatible USB Devices

Video file compatibility with this unit is limited as yy MP3 Player: Flash type MP3 player.
follows:
yy USB Flash Drive:
yy Available resolution: within 720 x 576 (W x H) Devices that support USB2.0 or USB1.1. 1
pixels.
yy The USB function of this unit does not support all

Getting Started
yy The file name of the Video subtitle should be USB devices.
entered within 45 characters.
yy If there is impossible code to express in the Video USB device requirement
file, it may be displayed as “ _ “ mark on the display.
yy Devices which require additional program
yy Frame rate: less than 30 fps. installation when you have connected it to a
yy If the video and audio structure of recorded files is computer, are not supported.
not interleaved, either video or audio is outputted. yy Do not extract the USB device while in operation.
yy Playable Video file: “.avi”, “.mpg”, “.mpeg” yy For a large capacity USB, it may take longer than a
yy Playable Subtitle format: SubRip (*.srt/ *.txt), SAMI few minute to be searched.
(*.smi), SubStation Alpha (*.ssa/ *.txt), MicroDVD yy To prevent data loss, back up all data.
(*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt), Vobsub
(*.sub) yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Playable Codec format:
“Xvid”, “MPEG-1”, “MPEG-2” yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy Playable Audio format: “AC3”, “PCM”, “MP3”,
“WMA”, yy This unit recognizes up to 2,000 files.
yy Sampling frequency: within 32 to 48 kHz (MP3), yy External HDD, Card readers, Locked devices, or
within 32 to 48 kHz (WMA) hard type USB devices are not supported.

yy Bit rate: within 32 to 320 kbps (MP3), yy USB port of the unit cannot be connected to PC.
40 to 192 kbps (WMA) The unit cannot be used as a storage device.

yy For Discs formatted in Live file system, you can not yy Some USB may not work with this unit.
it on this unit.
yy If the name of movie file is different from that of
the subtitle file, during playback of a Video file,
subtitle may not be display.
yy If you play a Xvid file differ from Xvid spec, it may
not operate normally.
yy If you play GMC video file which is more than
1-warp point, video playback screen will not
smooth.
 10 Getting Started

Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby): Turns the power on or off.
F (Function): Selects the function and input source.
1 Input source / Function Display
Getting Started

Disc DVD/CD
USB USB 1 / USB 2
AUX (3.5 mm) input AUX 1
AUX input AUX 2
Bluetooth BT
LG Sound Sync (Wireless) LG TV
Radio FM
B (Open/Close): Opens and closes the disc tray.
0-9 numerical buttons: Selects numbered options in
a menu.
AUTO DJ: Selects the AUTO DJ mode. (Page 35)
h REPEAT: Listens to your files/tracks/chapters
repeatedly or randomly.
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
C/V (Skip): Skips backward or forward.
c/v (Scan): Scans for a section within a track/file/
chapter.
Z (Stop):
-- Stops playback.
-- Cancels DELETE function.
X (Play):
-- Starts playback.
-- Selects stereo/mono.
M (Pause): Pauses playback.
SPECIAL EQ: Chooses special equalizer.
VOL (Volume) +/-: Adjusts speaker volume.
MARKER/JUKEBOX:
Replacement of battery
-- Marks play list. (Page 29)
-- Selects JUKE BOX mode. (Page 34)
(R03
)
-- Makes JUKE BOX list.
(R03)

EQUALIZER: Chooses sound impressions.

[ (Mute): Mutes the sound.
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
 Getting Started 11

• • • • • • • • • • • • • • c• • • • • • • • • • • • • • • • • • • • • • • • • • • • d• • • • • • • • • • • • • •
! (Home): Displays the [Home Menu] on a DVD/CD CLOCK: Sets a clock and checks a time.
function. ALARM: With the ALARM function you can turn on
DISC MENU: Accesses the menu on a DVD disc. Discs, USB play and tuner reception at a desired time.
1
TITLE: If the current DVD title has a menu, the title SET: Confirms the setting.
menu appears on the screen. Otherwise, the disc

Getting Started
?: This button is not available.
menu may not appear.
VOCAL EFFECTS: Selects various vocal effects mode.
W/S/A/D (up/ down/ left/ right): Used to
navigate on-screen displays. SLEEP: Sets the system to turn off automatically at
a specified time.
PRESET/FOLDER +/-: (Dimmer: The display window will be darkened by
-- Chooses a preset number for a radio station. half.)
(Page 41) USB REC:
-- Searches for a folder of MP3/WMA files. When a -- Records to USB.
USB containing MP3/WMA files in several folders
is being played, press PRESET/FOLDER +/- to -- Stops recording.
select the folder you want to play. MIC (Microphone) ECHO: Selects ECHO mode
TUNING +/-: Tunes in the desired radio station. VOICE CANCELLER: You can reduce the vocal tones
during music playback from various input sources.
m (Select):
-- Acknowledges menu selection. ?: This button is not available.
-- Presetting the radio stations. MIC VOL (Microphone Volume) -/+ : Adjusts
microphone volume.
] (Close): Moves backwards in the menu or exits
the setup menu. KEY CHANGER (L/l): Changes the key to suit your
vocal range.
m INFO/DISPLAY
TV Control buttons: Controls the TV. (Page 56)
-- Accesses On-Screen Display. You can control the TV on or off and input source.
-- Sees information about your music (USB). An MP3
file often come with ID3 tag. The tag gives the
Title, Artist, Album or Time information.
-- Sees Bluetooth device name of the unit in BT
READY.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- When th ese units are successfully connected
each other in WIRELESS PARTY LINK mode, each
of connected device names appears in the each
unit.
CLEAR/DELETE:
-- Removes a number when setting the password.
-- Deletes MP3/WMA files. (USB only). (Page 33)
-- Deletes a song on the JUKE BOX list.
-- Deletes all the saved stations.
 12 Getting Started

Front panel
a b c d e f
1
Getting Started

o g

n m l k j i h

a USB 1 Port i F (Function)

You can play sound files by connecting the USB Selects the function and input source.
device.
Input source / Function Display
b 1 (Standby)
Disc DVD/CD
Turns the power on or off.
USB USB 1 / USB 2
c Display window
AUX (3.5 mm) input AUX 1
d (Remote sensor)
AUX input AUX 2
e 3 TWIN
Connects two speakers for TWIN mode in Bluetooth BT
WIRELESS PARTY LINK. LG Sound Sync (Wireless) LG TV
f USB 2 Port Radio FM
You can play sound files by connecting the USB
N (Play/Pause)
device.
-- Starts or pauses playback.
g VOLUME -- Selects stereo/mono.
-- Adjust speaker volume. V (Skip/Scan)
-- Adjust microphone volume. -- Skips forward.
h MIC VOL (Microphone volume) -- Scans for a section within a track/file/chapter.
Selects microphone volume mode. -- Selects the radio stations.
MIC (Microphone) ECHO KEY CHANGER (L/l)
Selects ECHO mode. Changes the key to suit your vocal range.
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
VOCAL EFFECTS
Selects various vocal effects mode.
 Getting Started 13

j Disc tray l LIGHTING

k USB REC / DEMO Selects the lighting mode.
-- Records to USB. SPECIAL EQ / BASS BLAST (or BASS BLAST+)
-- Stops Recording. -- Chooses special equalizer.
-- In power off status, if you press USB REC / 1
-- Press and hold to select BASS (or BASS+) effect
DEMO, show DEMO mode. directly.

Getting Started
Z (Stop) SEARCH
Stops playback or cancels DELETE function. Moves to folder or file in selection mode.
C (Skip/Scan) (USB only)
-- Skips backward. OK
-- Scans for a section within a track/file/chapter. Selects a folder when searching a file.
-- Selects the radio stations.
B (Open/Close) m MIC (Microphone) jack

Opens and closes the disc tray. n AUX IN 1 jack

AUTO DJ o EQUALIZER / SEARCH & MULTI

Selects the AUTO DJ mode. -- Chooses sound impressions.

-- Searches a folder or a file. (USB only)
-- Selects the lighting effects.
 14 Getting Started

Rear panel
a b c d e
1
Getting Started

100 100

g f

a Power cord
b SPEAKERS terminals
c SPEAKER LIGHTING SYSTEM
Connect the speaker lighting cables.
d AUX IN 2 (L/R)
Connect an auxiliary device.
e ANTENNA (FM)
f HDMI OUT TO TV
Connect to TV.
g SERVICE ONLY
S/W download connector.
 Getting Started 15

Useful functions for using the unit

Function Description To do Do this
BT Lock On/Off It allows you to connect a ON Press and hold X on the remote control
(Page 38) Bluetooth device only on BT or N on the unit for 5 seconds in BT 1
(Bluetooth) and LG TV functions. (Bluetooth) function.

Getting Started
Initial setting of this function was OFF Press and hold X on the remote control
set to off. or N on the unit for 5 seconds in BT
(Bluetooth) function.
Auto Power On It allows the unit to turn on ON Turn off the unit by pressing 1 on the unit
(Page 50) automatically by input signals: for 5 seconds.
BT (Bluetooth) or LG TV OFF Turn off the unit by pressing 1 on the unit
for 5 seconds.
 16 Connecting

Connections to Your TV >>Caution

yy Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
HDMI Out Connection the unit and then turn it on again.
If you have a HDMI TV or monitor, you can connect it yy When the HDMI connection with HDCP is
to this unit using a HDMI cable (Type A, High Speed not verified, TV screen is changed to black or
HDMI™ Cable). green screen or the snow noise may occur
Connect the HDMI OUT jack on the unit to the HDMI on the screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
2 IN jack on a HDMI compatible TV or monitor.
Set the TV’s source to HDMI (refer to TV’s Owner’s yy Make sure the unit is connected directly to
Connecting

manual). the TV. Tune the TV to the correct video input

channel.

100 100

Unit

TV

,,Note
yy You can fully enjoy digital audio and video
signals together with this HDMI connection.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Page 17)
 Connecting 17

,,Note Resolution Setting

yy If a connected HDMI device does not accept
The unit provides several output resolutions for
the audio output of the unit, the HDMI
HDMI.
device’s audio sound may be distorted or may
You can change the resolution using [Setup] menu.
not output.
1. Press ! on the remote control.
yy When you connect a HDMI or DVI compatible
device make sure of the following: 2. Use W/S/A/D on the remote control to
select the [Setup] and press m on the remote
- Try switching off the HDMI/DVI device and
control.
this unit. Next, switch on the HDMI/DVI
The [Setup] menu appears.
device and leave it for around 30 seconds, 2
then switch on this unit.

Connecting
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or
576p), 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices 3. Use W/S on the remote control to select
will work with this unit. [Display] option then press D on the remote
- The picture will not be displayed properly control to move to the second level.
with non-HDCP device. 4. Use W/S on the remote control to select the
- This unit does not playback and TV screen [Resolution] option then press D on the remote
is changed to black or green screen or the control to move to the third level.
snow noise may occur on the screen. 5. Use W/S on the remote control to select the
yy If there is noise or lines on the screen, please desired resolution then press m on the remote
check the HDMI cable and use a higher control to confirm your selection.
version cable than High Speed HDMI™ Cable.
yy The HDMI sounds output only DVD/CD
,,Note
yy If your TV does not accept the resolution you
function.
have set on the player, you can set resolution
to 480p (or 576p) as follows: Press Z for
more than 5 seconds.
yy [Home Menu] appears only on DVD/CD
function.
 18 Connecting

Connecting to speakers >>Caution

yy When you connect the speakers to the unit,
make sure to connect the speaker’s cable and
plug to the corresponding speaker connector.
Attaching the speakers to the yy Check the volume level before playing music
unit to prevent infirm, child, and pregnant women
from being shocked by the sudden and loud
To connect the cable to the unit, press each plastic
sound from the unit.
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad. yy Do not use the unit in a limited space. It may
2 Connect the black of each wire to the terminals
damage a person’s hearing. It is recommended
to use it in a wide space.
marked - (minus) and the other end to the terminals
Connecting

marked + (plus). yy Use the speaker supplied with this unit

only. Using any other speaker may cause
malfunction.
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
yy Avoid looking at the speaker lights for a long
time. It may cause damage to eyesight.

Attaching the speaker light

cables to the unit
To connect the speaker light cable to the unit,
insert the cable to SPEAKER LIGHTING SYSTEM
connectors on the unit.

>>Caution
yy Make sure that the jacks and the speakers
are matched correctly.
yy Make sure to connect the cables to
connectors tightly on the unit.
 Connecting 19

Optional Equipment AUX IN 2 Connection

Connection Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN 2 (L/R) connector.
If your device has only one output for audio(mono),
connect it to the left(white) audio jack on the unit.
AUX IN 1 Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the AUX IN 1 (3.5 mm)
connector. 2
100 100

Connecting
White

Audio cable
Red

3.5 mm
stereo cable

DVD, Blu-ray player etc.

Listening to music from your portable

player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the AUX IN 1
connector of the unit.
Or
Connect the external device to the AUX IN 2
connector of the unit.
2. Turn the power on by pressing 1.
3. Press F to select AUX 1 or AUX 2 function.
4. Turn on the portable player or external device and
start it playing.

,,Note
Automatically switches to the AUX 1 function
when you connect the portable device to the
AUX IN 1 connector.
 20 Connecting

USB Connection Antenna Connection

Connect a USB device (or MP3 player, etc.) to the Connect the supplied FM antenna for listening to the
USB ports on the unit. radio.

FM antenna
USB device

100 100

2
Connecting

,,Note
Removing the USB device from the unit:
1. Choose a different function/mode or press ,,Note
I twice in a row. Be sure to fully extend the FM wire antenna.
2. Remove the USB device from the unit.
 System Setting 21

Adjust the setup To display and exit the Setup

menu
settings 1. Press !on the remote control.
Displays the [Home Menu].
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 21 to 24.

OSD Initial language settings - 2. Select an [Setup] by using A/Don the remote
Optional control.
During the first use of this unit, the initial language 3. Press mon the remote control.
setup menu appears on your TV screen. You must Displays the [Setup]. 3
complete initial language selection before using the 4. Press !on the remote control or ] on the

System Setting
unit. English will be selected as the initial language. remote control to exit in the [Setup] Menu.
1. Press 1 to turn the unit on. The language setup About help menu for Setup
menu will appear on the screen.
Menu Buttons Operation
2. Use W/S/A/D on the remote control to
select a language then press m on the remote W/S Moving to another
W/S
control. Move menu.
The confirm menu will appear. Moving to previous
A
A
Move level.
D Moving to next level
D
Move or selecting menu.
3. Use A/D on the remote control to select the
[Enter] then m on the remote control to finish ] To exit the [Setup]
]
the language setup. Close menu.
m
m To confirm menu.
Select

,,Note
[Home Menu] appears only on DVD/CD function.
 22 System Setting

Language Display Mode

The Display Mode setting works only when the TV
Menu Language Aspect mode is set to 4:3.
Select a language for the Setup menu and on screen
[Letterbox]
display.
Displays a wide picture with bands on the upper
Disc Audio / Disc Subtitle / Disc Menu and lower portions of the screen.

Select the language you prefer for the audio track [Panscan]
(disc audio), subtitles, and the disc menu. Automatically displays the wide picture on the
entire screen and cuts off the portions that do
[Original]
not fit. (If the disc/file is not compatible with Pan
Refers to the original language in which the disc Scan, the picture is displayed at Letterbox ratio.)
was recorded.
[Other] Resolution
3
To select another language, press numeric Sets the output resolution of HDMI video signal.
System Setting

buttons and then m on the remote control Refer to “Resolution Setting” for details about the
to enter the corresponding 4-digit number resolution (page 17).
according to the language code list on the page
58. [Auto]
If you enter the wrong language code, press If the HDMI jack is connected to TVs providing
CLEAR/DELETE on the remote control. display information (EDID), automatically selects
the resolution best suited to the connected TV.
[Off (for Disc Subtitle)]
Turns off Subtitle. [1080p]
Outputs 1080 lines of progressive video.

Display [1080i]
Outputs 1080 lines of interlaced video.
TV Aspect
[720p]
Select the screen aspect to use based on the shape
Outputs 720 lines of progressive video.
of your TV screen.
[480p (or 576p)]
[4:3]
Outputs 480 (or 576) lines of progressive video.
Select when a standard 4:3 TV is connected.
[480i (or 576i)]
[16:9]
Outputs 480 (or 576) lines of interlaced video.
Select when a 16:9 wide TV is connected.
 System Setting 23

Audio
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down and prevent a sudden sound increase (Dolby
Digital only). Set to [On] for this effect.

HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so that
it effectively ‘waits’ for the picture to arrive: this is
called HD AV Sync. Use W/S on the remote control
to scroll up and down through the delay amount,
which you can set at anything between 0 and 3
300ms.

System Setting
 24 System Setting

Lock (Parental Control) Password

You can enter or change password.
Initial Setting the Area Code 1. Select [Password] on the [Lock] menu and then
When you use this unit for the first time, you have to press D on the remote control.
set the Area Code. 2. Press m on the remote control.
1. Select the [Lock] menu and then press D on the 3. Input a password and press m on the remote
remote control. control.
2. Press D on the remote control. To change the password, press m on the remote
To access the [Lock] options, you must input the control when the [Change] option is highlighted.
password you have created. Input a password and press m on the remote
Input a password and press m on the remote control.
control. Enter it again and press m on the Enter it again and press m on the remote control
remote control to verify. to verify.
If you make a mistake before pressing m on the
4. Press ! on the remote control to exit the menu.
3 remote control, press CLEAR/DELETE on the
remote control. ,,Note
System Setting

3. Select the first character using W/S on the If you forget your password, you can clear it
remote control. using the following steps:
4. Press m on the remote control and select the 1. Select the [Setup] menu on the
second character using W/S on the remote [Home Menu].
control. 2. Input the 6-digit number “210499” and
5. Press m on the remote control to confirm your pressmon the remote control.
Area code selection. The password is cleared.

Rating
Area Code
Blocks playback of rated DVDs based on their
contents. Not all discs are rated. Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
1. Select [Rating] on the [Lock] menu then press D
page 57.
on the remote control.
1. Select [Area Code] on the [Lock] menu then
2. Input a password and press m on the remote
press D on the remote control.
control.
2. Input a password and press m on the remote
3. Select a rating from 1 to 8 using the W/Son
control.
the remote control.
3. Select the first character using W/S on the
[Rating 1-8] remote control.
Rating one (1) has the most restrictions and 4. Press m on the remote control and select the
rating eight (8) is the least restrictive. second character using W/S on the remote
control.
[Unlock]
5. Press m on the remote control to confirm your
If you select unlock, parental control is not active Area code selection.
and the disc plays in full.
4. Press m on the remote control to confirm your
rating selection.
 Operating 25

Using the Home Menu

1. Press !on the remote control.
Displays the [Home Menu].

2. Select an option by using A/D on the remote

control.
3. Press m on the remote control then selected
option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or displays the
[MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
4
[Setup] – Displays the [SETUP] menu.

Operating
,,Note
yy [Home Menu] appears only on DVD/CD
function.
yy USB function is only available on music
playback.
 26 Operating

Basic Operations on To Do this

Disc Press h REPEAT on the

remote control repeatedly,
1. Insert the disc by using the B. and the current title, chapter
or track will be played back
2. Press ! on the remote control. Playing
repeatedly or randomly.
Displays the [Home Menu]. repeatedly or
randomly - DVD: Chapter/ Title/ Off
3. Select an option by using A/D on the remote
control. - Video(MOVIE): Title/ All/ Off
4. Press m on the remote control then selected -A
 udio CD/ MP3/ WMA: Track/
option menu. All/ Random/ Off

To Do this In the pause mode, Press

c/v on the remote control
Stop Press Z.
or press and hold C/V on
Press X on the remote control the unit repeatedly to select the
Playback required speed. (DVD Movie
or N on the unit. Slowing down
the playing title only)
Press M on the remote control
Pause speed In the pause mode, press
or N on the unit.
4 v on the remote control
Press M on the remote control or press and hold V on the
Operating

Frame-by- repeatedly to play title Frame- unit repeatedlyl to select the

Frame playback by-Frame. (DVD Movie title, required speed. (Movie file only)
Movie file only)

During playback, press Selecting Press 0 to 9 numerical buttons

C/V to go to the next a track/file on the remote control to go to
chapter/ track/ file or to return directly the desired file or track directly.
Skipping to the
next/ previous to the beginning of the current
chapter/ track/ chapter/ track/ file.
file Press C twice briefly to step
back to the previous chapter/
track/ file.

During playback, press c/v

on the remote control or press
Locating a and hold C/V on the unit
point quickly by repeatedly to select the required
playing a file in scan speed.
fast forward or
fast reverse To return to normal speed,
press X on the remote control
or N on the unit.
 Operating 27

Advanced Operations on To display the DVD title

r
Disc When you play a DVD which contains several title,
you can select the title you want using the Menu.
1. Press TITLE on the remote control.
Displaying Disc Information The disc’s title appears.
on-screen 2. Select the menu by pressing W/S/A/D on
You can display various information about the disc the remote control.
loaded on-screen. 3. Press m on the remote control to confirm.
1. Press m INFO/DISPLAY on the remote control
to show various playback information. 1.5 times speed playback
The displayed items differ depending on the disc
type or playing status. r
2. You can select an item by pressing W/Son the The 1.5 speed allows you to watch the pictures and
remote control and change or select the setting listen to the sound quicker than playing at a normal
by pressing A/D on the remote control. speed.
Title – C
 urrent title number/ total number of titles. 1. During playback, press X on the remote control
Chapter – C
 urrent chapter number/ total number of to play at 1.5 times speed.
chapters. “dX1.5” appears on the screen. 4
Time – Elapsed playing time. 2. Press X on the remote control again to exit.

Operating
Audio – Selected audio language or channel.
Subtitle – Selected subtitle. Screen Saver
Angle – Selected angle/ total number of angles. The screen saver appears when you leave the unit in
Stop mode for about five minutes.
,,Note
If any button is not pressed for a few seconds,
the on-screen display disappears.

To display the DVD Menu

r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1. Press DISC MENU on the remote control.
The disc’s menu appears.
2. Select the menu by using W/S/A/D on the
remote control.
3. Press m on the remote control to confirm.
 28 Operating

Starting play from selected time Resume playback

ry ryut
To start playing at any chosen time on the file or title. The unit records the point where you pressed the Z
depending on the disc.
1. Press m INFO/DISPLAY on the remote control If “MZ (Resume Stop)” appears on the screen briefly,
during playback. press X on the remote control or N on the unit to
2. Press W/S on the remote control to select the resume playback
time clock icon and “--:--:--” appears. (from the scene point).
3. Input the required start time in hours, minutes, If you press Z twice or unload the disc,
and seconds from left to right. “Z”(Complete Stop) appears on the screen.
If you enter the wrong numbers, press CLEAR/ The unit will clear the stopped point.
DELETE on the remote control to remove the
numbers you entered. ,,Note
Then input the correct numbers. yy The resume point may be cleared when a
For example, to find a scene at 1 hour, button is pressed (for example; 1, B, etc).
10 minutes, and 20 seconds, enter “11020” by yy This function may not work on some disc or
using numerical buttons on the remote control. title/track.
4. Press m on the remote control to confirm.
Playback starts from the selected time.
4 Changing subtitle code page
y
Operating

If the subtitle is not displayed properly, you can

change the subtitle code page to view the subtitle file
properly.
1. During playback, press m INFO/DISPLAY on the
remote control to display the On-Screen display.
2. Use W/S on the remote control to select the
[Code Page] option.
3. Use A/D on the remote control to select
desired code option.
4. Press ] on the remote control to exit the On-
Screen display.
 Operating 29

Marked Playback To delete a Marker

ut 1. Use W/S on the remote control to select the
The mark function enables you to store your track that you wish to erase from the marked file.
favourite files from any disc in the unit memory. 2. Press MARKER/JUKEBOX on the remote control.
1. Select [Music] on the [Home Menu].
To delete all Markers
Returning to the upper folder. Use W/S/A/D on the remote control to select
(MP3/ WMA only) [Deselect All] then press m on the remote control in
program edit mode.
File information will be displayed
according to the ID3 TAG information ,,Note
on the appropriate music file. (MP3 The markers are also cleared when the disc is
only) removed, the unit is switched to power off or
the function is switched to others.

Operating
Selecting all tracks/files.
Deselecting all tracks/files.
Moving to the previous or next
file list.

2. Select a desired music on the [List] by using the

W/S on the remote control then press
MARKER/JUKEBOX on the remote control to
appears the mark on the list.
3. Press mon the remote control.
Displays the play mode.
4. Select the play mode by using the W/S on
the remote control and press mon the remote
control.

[Mark Play]
Marked playback.
[Current Play]
Normal playback.

,,Note
If you want to select all files on the list, select
[Select All] and press m on the remote control.
 30 Operating

Viewing a PHOTO file About help menu in the full screen

i Menu Buttons Operation

This unit can play discs with photo files. m m INFO/ Displaying the Option
1. Select [Photo] on the [Home Menu] and press Menu DISPLAY menu.
m on the remote control
a/d
A/D Moving to another file.
Moving to the previous or next Prev./ Next
file list. ] Returning to the
]
List [Photo] menu.
Options while viewing a photo
You can use various options during viewing a photo in
full screen.
1. While viewing a photo in full screen, press
m INFO/DISPLAY on the remote control to
display the option menu.
2. Select an option using W/S/A/D on the
Returning to the upper remote control.
folder.
4
2. Press W/S on the remote control to select a
Operating

folder, and then press mon the remote control.

3. If you want to view a slide show, press W/Son
the remote control to highlight a file and press
Xon the remote control. a

About help menu in the [Photo] menu

b c d e
Menu Buttons Operation
a Current photo/ Total number of photos –
d Slide Viewing a slide Use A/D on the remote control to view
X
Show show. previous/next photo.
W/S/ b Slide Show d/M – Press m on the remote
Moving to another control to start or pause slide show.
A/D W/S/A/D
file or content.
Move c Speed x3/ x2/ x1 – Use m on the remote
m Viewing a control to select a delaying speed between
m photos in a slide show.
Select particular file.
] Returning to the d Rotate – Press m on the remote control to
] rotate the photo.
Close [Home Menu].
e Go to list – Press m on the remote control to
return [Photo] menu.
 Operating 31

Basic Operations on ,,Note

yy Repeat/Shuffle playback operates as follows.
USB On Diplay Description
1. Connect the USB device to the USB port. Plays songs in order and stops
OFF
the playback.
2. Select USB function by pressing F.
ONE Plays a same song repeatedly.
To Do this
FOLDER Plays songs in a folder repeatedly.
Stop Press Z.
ALL Plays all the songs on repeatedly.
Press X on the remote control or
Playback
N on the unit Plays all the songs once randomly,
SHUFFLE and stops the playback.
Press M on the remote control or
Pause
N on the unit.
Press and hold C/V or yy When you play JUKE BOX list, only ONE and
Scanning for a ALL are available.
c/v on the remote control
section within
during playback and release it at yy Even after restarting the unit or switching
a file
the point you want to listen to. one function to another, you can listen to
music from the point where it’s last been
Press 0 to 9 numerical buttons on played. 4
Selecting a file
the remote control to go to the
directly yy USB function is only available on music
desired file directly.

Operating
playback.
-- In stop status,
Press C/V to go to the next/
previous file.
-- During playback,
(1) By using C/V buttons:
Press V to go to the next file.
Skipping to
Playing in less than 3 seconds,
the next/
press C to go to the previous file.
previous file
Playing after 3 seconds, press C
to go to the beginning of the file.
(2) By using SEARCH buttons:
Rotate EQUALIZER / SEARCH &
MULTI on the unit or C/V and
press N on the unit to play the
file.

Press h REPEAT on the

Playing
remote control repeatedly. Refer
repeatedly or
to the note for details about the
randomly
display change.
 32 Operating

Selecting a folder and ,,Note

yy USB Folders/Files are recognized as below.
an MP3/WMA file
*
On the unit
1. Press SEARCH and rotate EQUALIZER /
SEARCH & MULTI or C/V until a desired file
appears. You can also search a folder if you press
SEARCH again.
2. Press OK or N to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or N again. The selected
file is played.

On the remote control

1. Press PRESET/FOLDER +/- repeatedly until a
desired folder appears.
2. Select the file you want by using C/V.
3. Press X to play it.
4
Operating

yy If there is no file in a folder, the folder will not

appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
*ROOT: The first screen you can see when a
computer recognize the USB is “ROOT”.
 Operating 33

Deleting a file/folder or format

You can delete file, folder on your USB or format the
USB.
1. Select USB function by pressing F.
2. Press CLEAR/DELETE on the remote control
repeatedly, the display changes as followings.
DEL FILE DEL DIR FORMAT

On Display Description
DEL FILE Select the file you want to delete
Select the folder you want to
DEL DIR
delete
FORMAT Select to format the USB device.
If you want to exit the current mode, press Z.
3. To delete file/folder or format, press and hold
CLEAR/DELETE on the remote control.

>>Caution 4
yy Do not extract the USB device during
operation. (play, delete, etc.)

Operating
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
 34 Operating

Advanced Operations on Editing JUKE BOX

1. Press and hold MARKER/JUKEBOX on the
USB remote control to enter the edit mode.
(Playing will be stopped when you press
MARKER/JUKEBOX on the remote control.)
JUKE BOX Playback 2. Press PRESET/FOLDER +/- on the remote
control to select a file to edit.
JUKE BOX function enables you to make a playlist of
your favorite files from a USB. A playlist of up to 100 3. Press C/V on the remote control.
files can be entered. 4. Press MARKER/JUKEBOX on the remote control.
5. Repeat 2 to 4 to store the other files.
Making JUKE BOX list 6. Press MARKER/JUKEBOX on the remote control
1. Press and hold MARKER/JUKEBOX on the once again.
remote control to enter the edit mode. To play the JUKE BOX list, press X on the remote
(Playing will be stopped when you press control after you edit the list.
MARKER/JUKEBOX on the remote control.)
2. Select a file by pressing C/V on the remote Deleting JUKE BOX list
control.
Deleting function only works in the edit mode.
3. Press MARKER/JUKEBOX on the remote control
1. Press and hold MARKER/JUKEBOX on the
to save the file.
4 remote control to enter the edit mode.
4. Repeat steps 2 - 3 to store other files.
Or
(You can modify the list by pressing PRESET/
Operating

FOLDER +/- on the remote control to select the Press CLEAR/DELETE on the remote control
JUKE BOX program number.) while JUKE BOX is played to enter the edit mode.
5. Press MARKER/JUKEBOX on the remote control 2. Select a song by pressing PRESET/FOLDER +/-
once again. on the remote control repeatedly.
To play the JUKE BOX list, press X on the remote 3. Press CLEAR/DELETE on the remote control
control after you make the list. while a song is selected.

,,Note ,,Note
When making or modifying the JUKE BOX list, yy If there is no JUKE BOX list, “NO PROG”
REPEAT mode is off. appears on the display window when you
press MARKER/JUKEBOX on the remote
control.
Enjoying JUKE BOX yy JUKE BOX is switched off in the case below.
Press MARKER/JUKEBOX on the remote control -- Changing to a different function.
once. “ON - JUKE BOX” appears on the display -- Turning off and on the unit.
window. -- Operating the numerical buttons on the
To play JUKE BOX list, press X on the remote control. remote control.
To cancel it, press MARKER/JUKEBOX on the remote -- Playing a file by using SEARCH and
control once. EQUALIZER / SEARCH & MULTI on the
“OFF - JUKE BOX” appears on the display window. unit.
yy JUKE BOX list is cleared in the case below.
-- Removing the USB device.
-- Deleting or recording music files in the USB
device.
 Operating 35

Playback Effect

AUTO DJ
AUTO DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings.
RANDOM (SHUFFLE) SEQUENTIAL OFF

On Display Description
OFF -
RANDOM The music is played randomly on
(SHUFFLE) this mode.
The music is played repeatedly on
SEQUENTIAL
this mode. 4

,,Note

Operating
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using Z on AUTO DJ mode, AUTO DJ
will be disabled.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only SEQUENTIAL is selected when played
JUKE BOX list.
yy In USB function, SHUFFLE displays instead of
RANDOM.
 36 Operating

Using BLUETOOTH® Listening to music stored on the

Bluetooth devices
wireless technology
Pairing your unit and Bluetooth device
About Bluetooth Before you start the pairing procedure, make sure the
Bluetooth feature is activated on your Bluetooth
Bluetooth is wireless communication technology for device. Refer to your Bluetooth device’s user guide.
short range connection. Once a pairing operation is performed, it does not
The sound may be interrupted when the connection need to be performed again.
interfered by the other electronic wave or you 1. Turn on the unit.
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth ,,Note
wireless technology does not incur any charges. When Bluetooth connection lock is activated,
A mobile phone with Bluetooth wireless technology you can search Bluetooth device in BT function.
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology. 2. Operate the Bluetooth device and perform the
yy Available Devices: Smart phone, MP3, Notebook, pairing operation. When searching for this unit
etc. with the Bluetooth device, a list of the devices
yy Version: 4.0 found may appear in the Bluetooth device display
4 depending on the type of Bluetooth device. Your
yy Codec: SBC, AAC unit appears as “LG CL65D (XX)”.
,,Note
Operating

Bluetooth Profiles
yy XX means the last two digits of
In order to use Bluetooth wireless technology,
Bluetooth address. For example, if your
devices must be able to interpret certain profiles.
unit has a Bluetooth address such as
This unit is compatible with following profile.
9C:02:98:4A:F7:08, you will see
A2DP (Advanced Audio Distribution Profile) “LG CL65D (08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices have a different pairing way. For
details about Bluetooth pairing, refer to your
Bluetooth device manual.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi phone
pairing.
 Operating 37

3. When this unit is successfully connected with ,,Note

your Bluetooth device, “PAIRED” appears on the yy The sound may be interrupted when the
display window and change to Bluetooth device connection has interference from other
name soon. Then “BT” will appear on the display electronic devices.
window. yy Depending on the type of the device, you may
,,Note not be able to use the Bluetooth function.
yy “PAIRED” will momentarily appear on the yy You can enjoy wireless system using phone,
display when you connect other devices for MP3, Notebook, etc.
multi phone pairing. yy The more distance between the unit and the
yy If the device name is unavailable, “_” will be Bluetooth device, the lower the sound quality
displayed. becomes.
yy Bluetooth connection will be disconnected
4. Listen to music. when the unit is turned off or the Bluetooth
To play a music stored on your Bluetooth device, device gets too far from the unit.
refer to your Bluetooth device’s user guide. yy When Bluetooth connection is disconnected,
,,Note connect the Bluetooth device to the unit
again.
yy When using Bluetooth technology, you have
to make a connection between the unit and yy When a Bluetooth device is not connected,
the Bluetooth device as close as possible and “BT READY” appears on the display window.
keep the distance. yy When you use the Bluetooth function, 4
However, it may not work well in certain adjust the volume to a proper level on the

Operating
situations as described below: Bluetooth device.
-- There is an obstacle between the unit and yy When you connect Bluetooth device (iOS
the Bluetooth device. device etc.) to this unit or operate the device,
-- There is a device using same frequency the volume level can be synchronized with
with Bluetooth technology such as a each other.
medical equipment, a microwave or a yy Bluetooth connection will be disconnected
wireless LAN device. when you change the Bluetooth function
yy If Bluetooth connection does not work well, to some other function. In “LG XBOOM” app
try pairing it again. connection, only one device which you are
yy Even if this unit is connected to up to 3 playing keeps Bluetooth connection. You can
Bluetooth devices in the Bluetooth mode, control the Bluetooth device with this unit
you can play and control music by using only but you cannot use sound output.
one of the connected devices. yy When entering the Bluetooth function,
this unit automatically connects to the last
connected Bluetooth device or the device
which played back last.
(Auto connection may not be supported
depending on the connected device
specifications.)
 38 Operating

Controls connected Bluetooth device

You can control connected Bluetooth device by the
unit; play, pause, stop, skip.

,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.

Bluetooth connection lock (BT LOCK)

You can limit Bluetooth connection to only
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connection.
To turn this function on, press and hold Xon the
remote control or N on the unit for 5 seconds in BT
(Bluetooth) function.
“ON-BT LOCK” appears then you can limit Bluetooth
4 connection.
To turn this function off, press and hold Xon the
Operating

remote control or N on the unit for 5 seconds in BT

(Bluetooth) function.
“OFF-BT LOCK” appears.

,,Note
Even if you set up Bluetooth connection lock to
On, this unit turns on by Auto Power function.
Turn off Auto Power function to prevent it.
(Page 50)
 Operating 39

Using the LG XBOOM Install “LG XBOOM” App onto

Your Bluetooth Device
App There are two ways to install “LG XBOOM” App onto
,,Note Your Bluetooth Device.
yy Only Android OS is available to use “LG
XBOOM” app with this unit. Install “LG XBOOM” App through QR
yy It is recommended to use the latest version
code
of app. 1. Install “LG XBOOM” app through QR code. Use
the scanning software to scan the QR code.

About “LG XBOOM” App

“LG XBOOM” app brings a suite of new features to
this unit.
To enjoy more features, you are recommended to
download and install free “LG XBOOM” app. 2. Tap an icon for installation.

Below introduces you to a feature of “LG XBOOM” ,,Note

app. yy Make sure that your Bluetooth device is
connected to the Internet.
Multi Juke box: Your entertainment increases three 4
fold when you connect up to 3 Bluetooth phones yy Make sure that your Bluetooth device

Operating
at the same time. Play music from three phones and has a scanning software application. If you
create a customized playlist from all phones. don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
 40 Operating

Install “LG XBOOM” App through Activate Bluetooth with “LG

“Google Android Market (Google Play XBOOM” App
Store)”
“LG XBOOM” app helps to connect your Bluetooth
1. Tap the “Google Android Market (Google Play device to this unit.
Store)” icon.
Tap “LG XBOOM” app icon on the home screen to
2. In the search bar, type in the “LG XBOOM” and open “LG XBOOM” app, and go to the main menu.
search it.
3. In the search result list, find and tap “LG XBOOM”
,,Note
to start downloading Bluetooth app. yy “LG XBOOM” app will be available in the
software version as follow;
4. Tap an icon for installation.
-- Android O/S: Ver 5.0 (or later)
,,Note yy If you use “LG XBOOM” app for operation,
yy Make sure that your Bluetooth device is there would be some differences between
connected to the Internet. “LG XBOOM” app and the supplied remote
yy Make sure that your Bluetooth device is control. Use the supplied remote control as
equipped with “Google Android Market necessary.
(Google Play Store)”. yy Depending on the Bluetooth device, “LG
XBOOM” app may not work.
yy After connection of “LG XBOOM” app, music
4 may be output from your Bluetooth device.
In this case, try connecting procedure again.
Operating

yy If you operate the other applications or

change the settings on your Bluetooth
device while using “LG XBOOM” app, “LG
XBOOM” app may operate abnormally.
yy When “LG XBOOM” app operates abnormally,
check your Bluetooth device and the
connection of “LG XBOOM” app and then try
to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “LG
XBOOM” operation.
yy Check Bluetooth setting on your Bluetooth
device if “LG XBOOM” app connection does
not work well.
 Operating 41

Radio Operations Presetting the Radio Stations

You can preset 50 stations for FM.
Be sure that FM antenna is connected. (Page 20) Before tuning, make sure to turn down the volume.
1. Press F until FM appears in the display window.
Listening to the radio 2. Select the desired frequency by pressing
1. Press F until FM appears in the display window. TUNING-/+ on the remote control or C/V on
The last received station is tuned in. the unit.
2. Auto tuning: 3. Press m on the remote control. A preset number
Press and hold TUNING-/+ on the remote will blink in the display window.
control or C/V on the unit until the frequency 4. Press PRESET/FOLDER +/- on the remote
indication starts to change, then release. Scanning control to select the preset number you want.
stops when the unit tunes in a station. 5. Press m on the remote control. The station is
Or stored.
Manual tuning: 6. Repeat steps 2 to 5 to store other stations.
Press TUNING-/+ on the remote control or 7. To listen a preset station,
C/V on the unit repeatedly. press PRESET/FOLDER +/- or 0 to 9 numerical
3. Adjust the volume by pressing VOL +/- on the buttons on the remote control.
remote control or rotating VOLUME knob on the
unit repeatedly. 4
Deleting all the saved stations

Operating
1. Press CLEAR/DELETE on the remote control.
Improving poor FM reception “DEL ALL” will flash up on the display window
Press X on the remote control or N on the unit. 2. Press CLEAR/DELETE on the remote control to
This will change the tuner from stereo to mono and erase all the saved radio stations.
usually improve the reception. “DELETED ALL” will flash up on the unit display.
 42 Operating

Sound adjustment You can select a desired sound mode by using

SPECIAL EQ on the remote control or SPECIAL EQ /
BASS BLAST (or BASS BLAST+) on the unit.

Setting the sound mode On Display Region Description

This system has a number of pre-set equalizers. The
displayed items for the equalizer may be different FUNK, REGUETON,
depending on sound sources and effects. SAMBA,
Latin
MERENGUE, AXE,
You can select a desired sound mode by using America
SALSA, SERTANEJ,
EQUALIZER on the remote control or EQUALIZER / Optimized
FORRO
SEARCH & MULTI on the unit. equalizer
for the
ARABIC Middle East music genre
On Display Description
prefered in
BASS (BASS BLAST) DANGDUT Indonesia each region.
Reinforces the bass
or
and powerful sound.
BASS+ (BASS BLAST+) AFRO Africa
This program lends
INDIA India
an enthusiastic
POP
atmosphere to the
4 CLASSIC
ROCK
sound, giving you the ,,Note
feeling you are at an yy On some speakers, sound may not be heard
Operating

JAZZ
actual rock, pop, jazz or or heard in low sound depending on the
classic concert. sound mode.
You can enjoy the yy By pressing and holding SPECIAL EQ / BASS
FOOTBALL equalizer FOOTBALL BLAST (or BASS BLAST+) on the unit for 3
STADIUM. seconds, you can directly select BASS (BASS
BLAST) or BASS+ (BASS BLAST+) effect.
You can enjoy
STANDARD
optimized sound.
 Operating 43

Advanced Operations To stop recording

To stop recording, press USB REC on the remote
control or USB REC / DEMO on the unit.

Recording to USB To select recording bit rate

You can record a various sound source to USB. 1. Press and hold USB REC on the remote control
(DVD/CD, USB 1, AUX 1, AUX 2, FM) or USB REC / DEMO on the unit for 3 seconds.
1. Connect the USB device to the unit. 2. Press C/V to select a bit rate.
2. Press F to select a function you want to record. 3. Press USB REC on the remote control or
3. Start the recording by pressing USB REC on the USB REC / DEMO on the unit to finish the
remote control or USB REC / DEMO on the unit. setting.

Function Status Result The making of unauthorized copies of copy-

Play/Pause Recorded until stop protected material, including computer
programs, files, broadcasts and sound recordings,
Resume stop Quick recorded the latest may be an infringement of copyrights and
(Page 45) song constitute a criminal offense.
This equipment should not be used for such
Quick recorded All songs purposes.
In case below, scope is Be responsible 4
limited. Respect copyrights

Operating
- After File search (Page
32), quick recorded an
indexed song.
- Only while the Folder
USB 1 name is displayed on the
display window, quick
Full stop recording All songs on
Folder. (Folder Search
Mode is released when
there is no button input
for a few seconds after
entering the folder search
mode.) (Page 32)
- After JUKE BOX On
(Page 34), quick
recorded All songs of JUKE
BOX.

DVD/CD,
AUX 1, - Recorded until stop
AUX 2, FM

-- If you connect both USB 1 and USB 2, press USB

REC on the remote control or USB REC / DEMO
on the unit when USB 1 or USB 2 which you want
to record blinks in the display window.
 44 Operating

,,Note ,,Note
yy When you stop recording, the file that has yy You can record MIC. (Except when recording
been recorded at that time will be stored. USB that are in stop status.)
(Except when recording MP3/WMA files on yy You can control recorded microphone sound
the USB that are in stop status.) according to microphone volume.
yy Do not remove the USB device or turn off yy You may not store more than 2,000 files.
the unit during USB recording. If does not, an
yy In case of the unsupported MP3/WMA file,
incomplete file may be made and not deleted
the file recording may be stopped.
on PC.
yy When you are recording during playback, the
yy If USB recording does not work, the message sound now playing is output.
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the yy VOICE CANCELLER or KEY CHANGER
display window. will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
yy Multi card reader device or external HDD can CHANGER.
not be used for USB recording.
yy VOICE CANCELLER or KEY CHANGER can
yy A file is recorded by about 512 Mbyte when not be operated during recording.
you record for a long term.
yy It’ll be stored as follows
USB (MP3/WMA)
4 Play or pause status The other status
'*-&@3&$ '*-&@3&$ '*-&@3&$ '*-&@3&$
"6%*0@ "6%*0@ "#$ 'JMF
OBNF"#$ 'JMF
OBNF
Operating

"6%*0@ "6%*0@ %&' 'JMF
OBNF%&' 'JMF
OBNF

DVD/CD Tuner
%*4$@3&$ 56/&3@3&$ $%@3&$
"6%*0@ "6%*0@@'.53"$,@
"6%*0@ 53"$,@

The other source* 5IF
PUIFS
TUBUV

5IF
PUIFS
TUBUVT

05)&34@3&$ %+@.*9@3&$ 1MBZ
PS
QBVTF
TUB

"6%*0@@".1MBZ
PS
QBVTF
TUBUVT

"6%*0@ .*9@
"6%*0@ .*9@

*: AUX and the like.

Tuner: The current recording frequency is shown
 Operating 45

Other Operations CHILDSAFE Mode

This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
Turn off the sound temporarily
To turn on CHILDSAFE mode, press and hold OK on
Press [on the remote control to mute your sound. the unit when the volume of the unit is “MIN”.
You can mute your unit, for example, to answer the In CHILDSAFE mode, the volume increase gradually.
telephone, the “MUTE” will appear in the display
window. To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
To cancel it, press [on the remote control again or this mode is turned on.
change the volume level.
,,Note
DEMO In case of USB or BT (Bluetooth) function,
CHILDSAFE mode does not work after about
In the power off state, press USB REC / DEMO on 2 minutes from power on the unit even if this
the unit once. The unit will power on and display the mode is enabled.
each of functions in the display window.
To cancel the DEMO function, press USB REC /
DEMO on the unit once more.
Last Scene Memory
4
Resume stop r

Operating
The unit records the point where you pressed Z This unit memorizes last scene from the last disc that
depending on the disc or USB. is viewed. The last scene remains in memory even if
you remove the disc from the unit or switch off the
If you press Z twice, the unit will clear the stopped unit. If you load a disc that has the scene memorized,
point. the scene is automatically recalled.

Power Resume - Optional

r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save current
playback status.

System Select - Optional

You must select the appropriate system mode for
your TV system. Press and hold M on the remote
control for more than five seconds to be able to
select a system in the [Home Menu]. (NTSC PAL)

,,Note
If the USB device is connected or a disc is
inserted, this function is not operated.
 46 Operating

Using Microphone VOICE CANCELLER

1. Connect your microphone to the MIC jack. You can reduce the vocal tones during music playback
from various input sources.
2. Play the music you want.
Press VOICE CANCELLER and “ON - VOICE
3. Sing along with the accompaniment.
CANCELLER” will appear in display window.
Adjust the microphone volume by pressing MIC
VOL+/- on the remote control or MIC VOL on To cancel it, press VOICE CANCELLER again.
the unit and rotating VOLUME on the unit in a The quality of the VOICE CANCELLER may be
clockwise or counterclockwise. different depending on the recording conditions of
music files.
,,Note
yy When not using the microphone, set the MIC ,,Note
volume to minimum or turn off the MIC and yy This function is available in the DVD/CD, USB
remove the microphone from the MIC jack. or BT (Bluetooth) Function.
yy If the microphone is set too near the speaker, yy If the function is not available, “NOT
a howling sound may be produced. SUPPORT” appears in the display window.
In this case, move the microphone away from
yy This function is available to use only when a
the speaker or decrease the sound level
microphone is connected.
by using the MIC VOL+/- on the remote
control or MIC VOL on the unit and rotating yy If a microphone is not connected, “INSERT
VOLUME on the unit. MIC” appears in the display window.
4
yy If sound through the microphone is extremely yy It is not available on the mono source.
loud, it may be distorted.
Operating

yy To initialize it, change the function or

In this case, pressing MIC VOL+/- on the disconnect the microphone.
remote control or MIC VOL on the unit and
yy This function may not be initialized depending
rotating VOLUME on the unit. on the status of connected devices.
yy You can give an echo effect to the sound from
the microphones by pressing MIC ECHO.
 Operating 47

KEY CHANGER VOCAL EFFECTS

You can adjust the key to 9 steps (4 steps higher, 4 When you connect your microphone to the MIC jack,
steps lower and the original key). you can enjoy karaoke function by changing voice in
yy To make key more sharp, one by one, the various source.
press the KEY CHANGER(L) repeatedly during To select various vocal effects mode, pressing VOCAL
playback. EFFECTS repeatedly or pressing VOCAL EFFECTS
yy To make the key more flatten, one by one, and then turning VOLUME on the unit when vocal
press the KEY CHANGER(l) repeatedly during effects mode appears in the display window.
playback. BASS SOPRANO HELIUM ROBOT

,,Note DUET MAN DUET WOMAN BASS ECHO1

SOPRANO ECHO1 HELIUM ECHO1
yy This function is available in the DVD/CD, USB ROBOT ECHO1 DUET MAN1 DUET
or BT (Bluetooth) Function. WOMAN1 BASS ECHO2 SOPRANO
yy To initialize it, change the function, disconnect ECHO2 HELIUM ECHO2 ROBOT ECHO2
the microphone or change the music. DUET MAN2 DUET WOMAN2 OFF
yy This function may not be initialized depending
on the status of connected devices.
,,Note
yy If a microphone is not connected, “INSERT
yy If the function is not available, “NOT MIC” appears in the display window.
SUPPORT” appears in the display window.
yy If you press KEY CHANGER or MIC ECHO
yy If a microphone is not connected, “INSERT on VOCAL EFFECTS mode, after backing up
4
MIC” appears in the display window. current VOCAL EFFECTS, turn off VOCAL

Operating
EFFECTS mode and operate KEY CHANGER,
or ECHO mode.
yy To turn off VOCAL EFFECTS mode, press and
hold VOCAL EFFECTS.
 48 Operating

ECHO LIGHTING
When you connect your microphone to the MIC jack, This function offers a party atmosphere by operating
you can give an echo effect to the sound from the the lighting on the unit.
microphones by pressing MIC ECHO.
Press LIGHTING on the unit repeatedly or press
ECHO 1 ECHO 2 OFF LIGHTING on the unit and then turn EQUALIZER /
,,Note SEARCH & MULTI on the unit.
yy If a microphone is not connected, “INSERT PARTY WATER FOREST (MY STYLE) OFF
MIC” appears in the display window.
,,Note
yy If you press VOCAL EFFECTS on ECHO
mode, after backing up current ECHO, turn yy Lighting function is available in all functions.
off ECHO mode and operate VOCAL EFFECTS yy Lighting mode retains in its previous mode
mode. when you first press LIGHTING on the unit,
To operate ECHO mode, press MIC ECHO press again to change modes.
again, after backing up current VOCAL yy If you want to use MY STYLE, you have to
EFFECTS. register a source with “LG XBOOM” app.
yy Do not look directly at the light emitting part
when the LIGHTING is turned on.
yy If the illumination brightness is glaring, switch
on the room lights or turn off the LIGHTING
4 of the unit.
yy You can also turn off the light by pressing and
Operating

holding LIGHTING on the unit.

 Operating 49

Sleep Timer Setting Dimmer

Press SLEEP on the remote control repeatedly to Press SLEEP on the remote control once.
select delay time between 10 and 180 minutes. The display window will be darkened by half.
After the delay time, the unit will be turned off. To cancel it, press SLEEP on the remote control
To cancel the sleep function, press SLEEP on the repeatedly until “OFF” appears.
remote control repeatedly until “OFF” appears.
,,Note
,,Note All the lighting turns off when Dimmer is being
yy You can check the remaining time before the operated.
unit is turned off. Press SLEEP on the remote
control to check or change the remaining
time.
yy You can edit the remain time when the
remaining time or “DIMMER” is displayed.

Operating
 50 Operating

AUTO POWER On Auto function change

This unit automatically turns on and off by an input This unit recognizes input signals such as
source: BT (Bluetooth) or LG TV. BT (Bluetooth), LG TV and AUX 1 and then
When you turn on your TV connected to this unit, automatically changes to the suitable function.
this unit recognizes the input signal and selects the
suitable function. You can hear the sound from the When you try to connect Bluetooth
unit. device
If you try to connect your Bluetooth device, this unit When you try to connect your Bluetooth device to
turns on and connects your Bluetooth device. this unit, Bluetooth function is selected.
You can play your music. Play your music on the Bluetooth device.
When you turn off this unit by pressing 1 on the
unit for 5 seconds each time, you can turn on or off When AUX IN 1 (3.5 mm stereo cable)
the AUTO POWER function. is connected
When you connect the portable device to the
On Display Description AUX IN 1 connector, AUX 1 function is selected.
AUTO POWER function is Play your music on the portable device.
ON-AUTO POWER
turned on.
When LG TV is connected
AUTO POWER function is
OFF-AUTO POWER When you turn on your LG TV connected by LG
4 turned off.
Sound Sync, this unit changes the function to LG TV.
,,Note You can hear the sound from your TV.
Operating

yy Depending on the connected device, this

function may not operate.
,,Note
yy This function is not available during recording
yy Depending on the connected device, the unit or deleting.
turns on but Bluetooth function may not be
connected. yy This function only works with devices that
were previously connected.
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to yy If the Bluetooth connection lock function
connect to the unit continually. Therefore it is is set, Bluetooth and LG TV connection will
recommended to disconnect the connection be only available on Bluetooth and LG TV
before turning off the unit. function. (Page 38)

yy If you try to connect to the “LG XBOOM” app,

Bluetooth function of this unit is turned on.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit, this
unit can automatically turn on by an input
source when this unit is turned off.
 Operating 51

Setting the Clock Using your player as an alarm

clock
1. Turn the unit on.
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
2. Press and hold ALARM on the remote control.
3. Select time mode by pressing C/V on the
remote control. 3. Press C/V on the remote control to change
the hours and minutes and press SET on the
- AM 12:00 (for an AM and PM display) or 0:00
remote control to save.
(for a 24 hour display)
4. Press C/V on the remote control to select
4. Press SET on the remote control to confirm your
function and press SET on the remote control to
selection.
save.
5. Select the hours by pressing C/V on the - Press C/V on the remote control to select a
remote control. preset number when you select tuner and then,
6. Press SET on the remote control. press SET on the remote control.
If there is no preset number, this step is skipped.
7. Select the minutes by pressing C/V on the
remote control. 5. Press C/V on the remote control to change
the volume and press SET on the remote control
8. Press SET on the remote control.
to save.

Setting the Clock through “LG ,,Note

yy If you set the clock time, you can check the 4
XBOOM” App time by pressing CLOCK on the remote

Operating
Install “LG XBOOM” app on your Android device. control even when the player is turned off.
(Page 39-40) yy You can set alarm after you set the clock
Your unit’s clock will be automatically synchronized time.
with your device by activating Bluetooth connection yy If you set the clock time and alarm, you
through “LG XBOOM” app. can check the alarm setting information by
pressing ALARM on the remote control even
when the unit is turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.
yy In case of DVD/CD or USB, this function is
available when you have music file. If you do
not have music file, the function is changed
to Tuner.
 52 Operating

LG Sound Sync ,,Note

yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV. (According to TV Specifications,
the volume and mute of this unit synchronize
You can control some functions of this unit by with TV.)
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync. yy If the connection fails, check the conditions of
Make sure your TV has the LG Sound Sync logo. this unit and your TV: power, function.
Controllable function by LG TV’s remote control: yy Make sure of the condition of this unit and
Volume up/down, mute. the connection in the cases below when using
LG Sound Sync.
Refer to the TV’s instruction manual for the details of
LG Sound Sync. -- The unit is turned off.
1. Turn on the unit by pressing 1. -- Changing to a different function.
2. Press F until LG TV function is selected. -- Disconnecting the wireless connection
caused by interference or a distance.
3. Set up the sound output of TV to listen to the
sound through this unit: yy If you try to change the function on using
TV setting menu [Sound] [TV Sound output] the LG TV function, volume will be change
[LG Sound Sync (Wireless)] according to the LG TV volume level.
4 “PAIRED” appears on the display window for yy Details of TV setting menu vary depending on
about 3 seconds and then you can see “LG TV” models of your TV.
Operating

on the display window if the TV and this unit are yy If you turned off the unit directly by pressing
connected normally. 1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yy When you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yy You should set the TV Sound output manually
depending on the TV version.
yy If you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.
 Operating 53

WIRELESS PARTY LINK ,,Note

yy If you using the LG Sound Sync, this function
Connection is not available. If you connect the LG TV
Function, “NOT SUPPORT” appears in the
display window.
You can enjoy the sound by using two speakers.
For enjoying WIRELESS PARTY LINK, you need to yy You can use microphone in the OTHER unit
purchase another speaker. only. In case of OTHER unit, some functions
are supported only.
It is compatible with unit that supports WIRELESS
PARTY LINK. yy When WIRELESS PARTY LINK is
disconnected, OTHER unit is changed to
BT(Bluetooth) function.
yy If the connection is failed, “FAILED” appears in
the display window.
yy Mute function is synchronized with each
other.
yy WIRELESS PARTY LINK connection will be
disconnected when you turn off the unit or
press 3 TWIN on the unit.
yy Sound of MAIN unit and OTHER unit may be
different depending on playback status or
source. 4
yy Check the following information when

Operating
connecting to Bluetooth.
1. Press 3 TWIN on the unit.
ROLE SELECT appears in the display window. -- You can connect only one Bluetooth
device in the MAIN unit. You cannot
2. Press 3 TWIN on the unit to select MAIN or connect Bluetooth device to the OTHER
OTHER. unit.
-  unit: Selects MAIN. -- WIRELESS PARTY LINK connection is only
supported on Android devices. (WIRELESS
- unit: Selects OTHER.
PARTY LINK connection may not be
Two units try to connect with each other. supported depending on the connected
3. When these units are successfully connected device specifications or OS.)
to each other, each of connected device names -- Removable/detachable Bluetooth
appears in the each unit. devices (ex. Dongle etc.) will not support
WIRELESS PARTY LINK connection.
-- When WIRELESS PARTY LINK is
connected, Bluetooth connection is not
available in status of recording or deleting.
-- If you connect WIRELESS PARTY
LINK while you are playing connected
Bluetooth device, the unit may be
reconnected again, depending on phone
specification.
 54 Troubleshooting

Troubleshooting

General
Problem Cause & Solution
yy Turn off the power of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external
The unit does not work properly
device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting
again.
yy Previous setting may not be saved when device power is shut off.
yy Plug the power cord into the wall outlet securely.
No power yy Check whether electricity failed.
Check the condition by operating electronic devices using the same
AC outlet.
yy Select the appropriate video input mode on the TV so the picture
No picture from the unit appears on the TV screen.
yy Connect the video cables securely to both the TV and unit.
yy Check whether you select right function.
Press function button and check if you have selected the right
No sound function.
yy Check to see if the speakers are connected correctly.
5 Connect speaker cables correctly.
Troubleshooting

The DVD picture quality is poor yy Clean the disc using a soft cloth with outward strokes.
yy Insert a disc.
yy Insert a playable disc (check the disc type, colour system and
A DVD/CD will not play regional code).
yy Place the disc with the label or printed side facing upwards.
yy Enter your password or change the rating level.

Humming noise heard while a DVD or yy Clean the disc using a soft cloth with outward strokes.
CD is playing yy Move unit and audio components further away from your TV.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
yy The signal strength of the radio station is too weak.
Radio stations cannot be tuned in Tune to the station manually.
properly.
yy No stations have been preset or preset stations have been cleared
(when tuning by scanning preset channels). Preset some radio
stations, see page 41 for details.
yy An unplayable disc is inserted. Check the playable disc.
yy No disc is inserted. Insert a disc.
The unit does not start playback yy The disc is dirty. Clean the disc. (Page 60)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
 Troubleshooting 55

Problem Cause & Solution

yy The remote control is too far from the unit.
Operate the remote control within about 7 m (23 feet).
The remote control does not work yy There is an obstacle in the path of the remote control and the unit.
properly. Remove the obstacle.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.

yy Check whether the speaker light cables are connected to the unit
correctly.
No speaker light Connect the speaker light cables to the unit correctly.
yy Check the speaker light effects by pressing LIGHTING on the unit.
(Page 48)

yy Check whether your LG TV supports LG Sound Sync.

LG Sound Sync does not work. yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
yy Check connection of the external device such as TV or Bluetooth
The AUTO POWER function does not device.
work.
yy Depending on the connected device, this function may not operate.

NOTES to release Demo mode

5
Problem Cause & Solution

Troubleshooting
Can not change input source with ‘F’ key such as
BT(Bluetooth), USB etc. and only DEMO mode is
showing in the display. yy Press ‘DEMO’ Key on the unit for 15 seconds.

Remote Control does not work properly.

 56 Appendix

Controlling a TV with Setting up the remote to control

your TV
the Supplied Remote You can operate your TV with the supplied remote
Control control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
You can control your TV using the buttons below.
1. While holding down 1 (TV POWER) on the
remote control, and press the manufacturer code
for your TV with the numerical buttons on the
remote control (see the table below).

Manufacturer Code Number

LG 1(Default), 2
Zenith 3, 4
GoldStar 1, 2
Samsung 6, 7

By pressing You can Sony 8, 9

Hitachi 4
1 (TV POWER) Turn the TV on or off.
2. Release the 1 (TV POWER) on the remote
Switch the TV’s input source
control to complete setting.
AV/INPUT between the TV and other
input sources. Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
,,Note manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
Depending on the unit being connected, you
may not be able to control your TV using some reset to the default setting. Set the appropriate code
of the buttons. number again.
6
Appendix
 Appendix 57

Area Code List

Choose an area code from this list.

Area Code Area Code Area Code Area Code

Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia SI
Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand TH
China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya LY Russian Vietnam VN
Ecuador EC Luxembourg LU Federation RU Zimbabwe ZW
Egypt EG Malaysia MY Saudi Arabia SA
El Salvador SV Maldives MV Senegal SN 6
Ethiopia ET Mexico MX

Appendix
 58 Appendix

Language code List

Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].

Language Code Language Code Language Code Language Code

Afar 6565 French 7082 Lithuanian 7684 Sindhi 8368
Afrikaans 6570 Frisian 7089 Macedonian 7775 Singhalese 8373
Albanian 8381 Galician 7176 Malagasy 7771 Slovak 8375
Ameharic 6577 Georgian 7565 Malay 7783 Slovenian 8376
Arabic 6582 German 6869 Malayalam 7776 Spanish 6983
Armenian 7289 Greek 6976 Maori 7773 Sudanese 8385
Assamese 6583 Greenlandic 7576 Marathi 7782 Swahili 8387
Aymara 6588 Guarani 7178 Moldavian 7779 Swedish 8386
Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tagalog 8476
Bashkir 6665 Hausa 7265 Nauru 7865 Tajik 8471
Basque 6985 Hebrew 7387 Nepali 7869 Tamil 8465
Bengali; Bangla 6678 Hindi 7273 Norwegian 7879 Telugu 8469
Bhutani 6890 Hungarian 7285 Oriya 7982 Thai 8472
Bihari 6672 Icelandic 7383 Panjabi 8065 Tonga 8479
Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Turkish 8482
Bulgarian 6671 Interlingua 7365 Persian 7065 Turkmen 8475
Burmese 7789 Irish 7165 Polish 8076 Twi 8487
Byelorussian 6669 Italian 7384 Portuguese 8084 Ukrainian 8575
Chinese 9072 Japanese 7465 Quechua 8185 Urdu 8582
6 Croatian 7282 Kannada 7578 Rhaeto-Romance 8277 Uzbek 8590
Czech 6783 Kashmiri 7583 Rumanian 8279 Vietnamese 8673
Appendix

Danish 6865 Kazakh 7575 Russian 8285 Volapük 8679

Dutch 7876 Kirghiz 7589 Samoan 8377 Welsh 6789
English 6978 Korean 7579 Sanskrit 8365 Wolof 8779
Esperanto 6979 Kurdish 7585 Scots Gaelic 7168 Xhosa 8872
Estonian 6984 Laothian 7679 Serbian 8382 Yiddish 7473
Faroese 7079 Latin 7665 Serbo-Croatian 8372 Yoruba 8979
Fiji 7074 Latvian, Lettish 7686 Shona 8378 Zulu 9085
Finnish 7073 Lingala 7678
 Appendix 59

Trademarks and Notes on Copyrights

yy This product incorporates copyright protection
Licenses technology that is protected by U.S. patents
and other intellectual property rights. Use of
All other trademarks are trademarks of their this copyright protection technology must be
respective owners. authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
Manufactured under license from Dolby programs, videotapes, BD-ROM discs, DVDs, CDs
Laboratories. Dolby, Dolby Audio, and the double-D and other materials may subject you to civil and/or
symbol are trademarks of Dolby Laboratories. criminal liability.

The terms HDMI, HDMI High-Definition Multimedia

Interface, HDMI Trade Dress and the HDMI Logos
are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.

“DVD Logo” is a trademark of DVD Format/Logo

Licensing Corporation. 6

The Bluetooth® word mark and logos are Appendix

registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
 60 Appendix

Maintenance Handling the Unit

When shipping the unit
Notes on Discs Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
Handling Discs packed at the factory.
Never stick paper or tape on the disc.
Keeping the exterior surfaces clean
Storing Discs Do not use volatile liquids such as insecticide spray
After playing, store the disc in its case. Do not near the unit. Wiping with strong pressure may
expose the disc to direct sunlight or sources of heat damage the surface. Do not leave rubber or plastic
and never leave it in a parked car exposed to direct products in contact with the unit for a long period of
sunlight. time.

Cleaning Discs Cleaning the unit

Fingerprints and dust on the disc can cause poor To clean the player, use a soft, dry cloth. If the
picture quality and sound distortion. Before playing, surfaces are extremely dirty, use a soft cloth lightly
clean the disc with a clean cloth. Wipe the disc from moistened with a mild detergent solution. Do not use
the center to out. strong solvents such as alcohol, benzine, or thinner,
Do not use strong solvents such as alcohol, benzine, as these might damage the surface of the unit.
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records. Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.

6
Appendix
 Appendix 61

Specifications
General
Power requirements Refer to the main label.
Power consumption Refer to the main label.
Dimensions (W x H x D) Approx. 350.0 mm x 163.0 mm x 251.0 mm
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 60 % RH

Inputs/ Outputs
Analog audio in (AUX IN 2) 2.7 Vrms (1 kHz), 75 Ω RCA jack (L,R)
Portable in (AUX IN 1) 1.3 Vrms (3.5 mm stereo jack) x 1
HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector ) x 1
Microphone (MIC) Sensitivity 20 mV (1 kHz), 6.3 mm jack x 1

Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz

System
Frequency Response 70 to 20,000 Hz
Signal-to-noise ratio More than 75 dB
Dynamic range More than 75 dB
Bus Power Supply (USB) 5 V 0 500 mA
6
Amplifier (RMS Output power)

Appendix
Total output 950 W RMS
Front 475 W RMS X 2 (3 Ω at 1 kHz, 25 % THD)

yy Design and specifications are subject to change without notice.

 62 Appendix

Speakers specifications
Front speaker
Type 2 Way 2 Speaker
Impedance 3Ω
Rated Input Power 475 W RMS
Max. Input power 950 W RMS
Dimensions (W x H x D) Approx. 300 mm x 363 mm x 253 mm
yy Design and specifications are subject to change without notice.

6
Appendix