5045E Tractor

Identification View
A.1

John Deere Tractor

(Specification and Design Subject to Change Without Notice)

PC11983 (N.1) APR-23 1/7

 5045E Tractor

Product Identification Number, 17-Digit, Machines Built Before January 2016

An individual product identification and serial number is assigned to each machine. When writing about or filling out warranty claims, use all the
characters shown on the plate.
PX280622 A.1

1 - Tractor World Manufacturing Code 1

2 - Tractor Manufacturer LV - John Deere Augusta Works
3 - Tractor Series 5
4 - Tractor Engine HP 045
5 - Tractor Family E
6 - Year of Manufacture 11
7 - Type of Transmission P - PowrReverser™
8 - Tractor Model Year +
9 - Platform Identifier 1 - OOS
10 - Tractor Serial Number 0001

PC11983 (N.1) APR-23 2/7

 5045E Tractor

Product Identification Number, 17-Digit, Machines Built After January 2016

An individual product identification and serial number is assigned to each machine. When writing about or filling out warranty claims, use all the
characters shown on the plate.
PX280621 A.1

1 - Tractor World Manufacturing Code 1

2 - Tractor Manufacturer LV - John Deere Augusta Works
3 - Tractor Series 5
4 - Tractor Engine HP 045
5 - Tractor Family E
6 - Tractor Family +
7 - Calender Year B
8 - Tractor Model Year +
9 - Platform Identifier 1- OOS
10 - Tractor Serial Number 00001

PC11983 (N.1) APR-23 3/7

 5045E Tractor
Calender Year / Model Year
Year Code Year Code Year Code Year Code
2008 8 2018 J 2028 W 2038 8
2009 9 2019 K 2029 X 2039 9
2010 A 2020 L 2030 Y 2040 A
2011 B 2021 M 2031 1 2041 B
2012 C 2022 N 2032 2 2042 C
2013 D 2023 P 2033 3 2043 D
2014 E 2024 R 2034 4 2044 E
2015 F 2025 S 2035 5 2045 F
2016 G 2026 T 2036 6 2046 G
2017 H 2027 V 2037 7 2047 H

To The Customer
The part numbers in this Parts Catalog were correct at the time of publication. Per John Deere policy, we continuously improve our products.
Therefore, when ordering parts verify the part numbers with your dealer.
SI Units of Measure
Metric dimensions are provided as applicable throughout this parts catalog.
Bolt and Cap Screw Strength Identification
Bolts and cap screws required to have high-strength qualities equivalent to metric property class 10.9 (SAE grade 8) or higher are identified
throughout this catalog by the description 10.9, 12.9 or 14.9. All standard bolts and cap screws are metric property class 8.8 (SAE grade 5) or
lower.
Serial Number Listing Information
Serial number information is listed to show on which machines each part can be used; for example:
– The part can be used on all products.
000000 – The part can be used on products beginning with the serial number listed.
– 000000 The part can be used on products up to and including the serial number listed.
000000 – 000000 The part can be used on products between and including the serial number listed.
When XXXXXX's are listed in place of a serial number, a serial number change was made, but the exact serial number was not available at the
time of publication.
Illustrations
Illustrations in this catalog are only intended as a reference for dealers and customers. These illustrations do not necessarily represent the exact
view of the parts.
Box-Enclosed Illustrations
Box-enclosed keyed parts in the illustration are available as a service assembly or an attachment. These parts may also include parts not avail-
able for service. The illustrations may not show all individual parts of an attachment. A box not keyed includes non-current parts.
Orientation Of Product
An arrow shown with an illustration is to indicate the direction of product forward travel. Right Hand (RH) and Left Hand (LH) sides are deter-
mined by product forward travel.
Orientation of Engine
Right Hand (RH) and Left Hand (LH) sides are determined by standing at flywheel and facing the engine.
John Deere Remanufactured Components
The REMAN parts listed in this catalog are intended for the repair or replacement of failed or worn original equipment components. John Deere
Reman components are manufactured to stringent John Deere standards and produced to original John Deere specifications that incorporates
the latest design and performance improvement updates.

PC11983 (N.1) APR-23 4/7

 5045E Tractor

Ag and Turf Tractor — Trademarks

ACS™ GreenStar™ PowrQuad™
ActiveSeat™ Harvest Smart™ PowrReverser™
AirCushion™ HarvestLab™ PowrSync™
AutoPowr™ HillMaster™ ProDrive™
AutoQuad™ HydraFlex™ QuikTach™
AutoTrac™ iMatch™ Reman™
Bullet Rotor™ iTorque™ Roll-Gard™
ClimaTrak™ IVLOC™ Service ADVISOR™
ComfortCommand™ IVT™ StarFire™
ComfortGard™ JDLink™ StellarSupport™
CommandARM™ Load Command™ STS™
CommandCenter™ Mega Track™ SyncReverser™
CommandTouch™ Nothing Runs Like a Deere™ SyncroPlus™
CommandView™ Parallel Tracking™ SyncShift™
Contour-Master™ PermaClutch 2™ SyncShuttle™
COOL-GARD™ Phoenix™ TLS™ (Triple-Link Suspension)
Field Office™ Power Zero™ TMIII™
FieldCruise™ PowerGard™ TMII™
Funk™ PowerTech™ Vari-Cool™

PC11983 (N.1) APR-23 5/7

 5045E Tractor

Ag and Turf Tractor — Terms and Abbreviations

Phrase Meaning Phrase Meaning
A/C Air Conditioning OD Outside Diameter
ALSO ORDER Also Order OOS Open Operator's Station
APPL This Application Only OPTION Option
AR As Required OR Or
ASSY Complete Assembly ORD Order
ATC Control Unit for ClimaTrak™ ORD W/ Order With
BCU Basic Control Unit OS Oversize
BIF Basic Informator PC0 Power Module (Roof)
CNLA Complete No Longer Available PC5 Power Module (Transmission)
(Order Individual Parts)
CTL Cut To Length PC6 Power Module (HF, CAB)
DSM Distributed Tractor Informator PEC Control Unit for PowrQuad™ /
Switch Module E-ICV
ECU Engine Control Unit PKG Package of
EPC PowrQuad™ PLUS Transmis- PLC Parking Lock Control Unit
sion Control Unit
EPQT Electrically Operated PRF Performance Monitor
PowrQuad™ Transmission
ETC Electronic Temperature Con- PTO Power Take-Off
trol
FI Field Installation Kit RATIO Ratio
FIP Fuel Injection Pump RCU Reverser Control Unit
FOR For REAR Rear
FRONT Front REMAN Remanufactured
GSD GreenStar™ Display RH Right Hand
HCS Hydraulic Cab Suspension SCV Selective Control Valve
HTC Heater Control Unit SFA Control Unit for Front Axle
Suspension and/Or Cab Sus-
pension
ID Inside Diameter SIC E-SCV/E-ICV Control Unit
INCL Includes SSU Control Unit for Steering Sys-
tem (AutoTrac™)
INCL KEYS Including Keys STD Standard
IOOS Isolated Open Operator's Sta- SUB Replaced by
tion
JDL JDLink™ Control Unit SUB FOR Substitute for
KIT Kit TCU Transmission Control Unit (Au-
toPowr™/IVT™)
LGTH Length TEC Tractor Equipment Control Unit

LH Left Hand TK Thickness

Phrase Meaning Phrase Meaning

PC11983 (N.1) APR-23 6/7

 5045E Tractor

LOW Lower TSC Control Unit for MFWD Axle

With TLS™ and Cab Suspen-
sion
MARKED Marked UIC User Interface Control Unit
MF Made From UIM User Interface Module
MFWD Mechanical Front Wheel Drive UP Upper
M-ICV Mechanical Operated Control USE WITH Use With
Valve (Mid-Mounted)
M-SCV Mechanical Operated Selective VTI John Deere Isobus Display
Control Valve
NA Not Applicable W/ With
NLA No Longer Available W/O Without
NSEP Not Supplied Separately Z Gear and Sprocket Teeth
Number

PC11983 (N.1) APR-23 7/7