PC

standard equipment
ENGINE: GUARDS AND COVERS: OTHER EQUIPMENT:
• Automatic engine warm-up system
• Dry type air cleaner, double element
• Engine, Komatsu SAA6D114E-3
• Fan guard structure
• Track guiding guard, center section
(each side)
• Large capacity Counterweight
• Electric horn
• Rear reflector
300LC
PC300LC-8M0
• Engine overheat prevention system • Slip-resistant plates
• Radiator and oil cooler dust proof net UNDERCARRIAGE: • Fuel refill pump
• Suction fan • Hydraulic track adjusters (Each side) HORSEPOWER
• Large capacity fuel pre-filter • Track roller, 8 each side
• Precleaner • Track shoe, 600 mm triple grouser Gross: 194 kW 260 HP / 1950 min-1
Net: 187 kW 250 HP / 1950 min-1
ELECTRICAL SYSTEM: OPERATOR ENVIRONMENT:
• Alternator, 24 V/60 A • A/C with defroster OPERATING WEIGHT
• Auto-decelerator • Large high resolution LCD monitor 33740 – 34100 kg
• Batteries, 2 X 12 V/126 Ah • Rear view mirrors (RH, LH, rear, sidewise)
• Starting motor, 24 V/7.5 kW • Seat belt, retractable BUCKET CAPACITY
• Working light, boom X 1 and • Seat suspension 1.4 – 2.30 m3
right console
WORK EQUIPMENT:
HYDRAULIC SYSTEM: • Arm
• Boom holding valve —2200 mm arm, heavy duty
• Power maximizing system • Boom
• Pressure Proportional Control (PPC) —6470 mm boom, heavy duty
hydraulic control system
• Two-mode settings for boom
• Working mode selection system

optional equipment
HYDRAULIC SYSTEM: WORK EQUIPMENT:
• Service valve • Boom
• Rock breaker attachment piping kit —6000 mm boom, heavy duty

DGMS EQUIPMENT: ELECTRICAL SYSTEM:

• Rear view camera • Working lights (2 on cab)
• Battery disconnect switch
• Audio visual Alarm ATTACHMENT:
• Automatic fire supression system • Hydraulic breaker
• Hydraulic quick coupler
OPERATOR ENVIRONMENT:
• Cabin accessories
—Fan
• Manual fire extinguisher
• Bolt-on top guard
• Cab front guard - Full height guard

www.komatsuindia.in Printed in India 201804

 Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.
Photos may include optional equipment.
 HYDR AULIC EXCAVATOR PC300LC-8M0
WALK-AROUND

PRODUCTIVITY, ECOLOGY & ECONOMY

High Production and Low Fuel Consumption by Total
Control of the Engine, Hydraulic and Electronic System
Low Emission Engine and Low Operation Noise
Large Drawbar Pull and Digging Force
Two-mode Setting for Boom

COMFORT & SAFETY

Large Comfortable Cabin
Factory Fitted DGMS items (Optional)

Heavy-duty Boom ICT * & KOMTRAX

Large bucket cylinder Large High Resolution Liquid Crystal Display
(LCD) Monitor
Equipment Management Monitoring System
KOMTRAX
* Information and Communication Technology
Large
Heavy-duty Arm Counterweight
MAINTENANCE & RELIABILITY
Easy Maintenance
High Rigidity Work Equipment

Large capacity bucket

PC300LC-8M0
HORSEPOWER Gross: 194 kW 260 HP / 1950 min-1
Net: 187 kW 250 HP / 1950 min-1
OPERATING WEIGHT 33740 – 33400 kg
Photos may include optional equipment.
BUCKET CAPACITY 1.4 – 2.3 m3

2 3
 HYDR AULIC EXCAVATOR PC300LC-8M0
PRODUCTIVITY, ECOLOGY & ECONOMY

TOTAL VEHICLE CONTROL ECO Gauge that Assists

Low Fuel Consumption Energy-saving Operations High Digging Force
One-touch power max. switch when kept pressed,
The newly-developed Komatsu 7-inch LCD color monitor Equipped with the ECO gauge that can be recognized at a
temporarily increases digging force for 8.5 seconds
SAA6D114E-3 engine enables NOx glance on the right of
of operation.
emissions to be significantly reduced the multi-function color
with the accurate multi-stage fuel Hydraulic control valve
monitor for environment- Maximum arm crowd force (ISO 6015):
injection by the engine controller. It friendly energy-saving
235 kN (24 t)
improves total engine durability using operations. Allows focus (With Power Max.)
Hydraulic system
high-pressure fuel injection system controller on operation in the green Maximum bucket digging force (ISO 6015):
developed specifically for construction range with reduced CO 2
259 kN (26.4 t)
machinery. This excavator significantly emissions and efficient (With Power Max.)
ECO gauge
reduces hourly fuel consumption using fuel consumption. Measured with Power Max. function,
the highly-efficient matching techniques 2200 mm arm and ISO 6015 rating.

of engine and hydraulic unit and also Main pump

provides features that promote energy- Working Modes

saving operations such as the E mode Selection
and ECO gauge. One-touch
The PC300LC-8M0 power max. switch
excavator is equipped with
Fuel consumption
six working modes (P, E, L,

3% reduced B, ATT/P and ATT/E mode).

Each mode is designed to
Smooth Loading Operation
Vs. PC300LC-7 match engine speed and pump output to the application. This
Based on typical work pattern collected via KOMTRAX.
Fuel consumption varies depending on job conditions. provides the flexibility to match equipment performance to Two return hoses
the job at hand. improve hydraulic
Engine Return hoses
Komatsu Technology Electronic control Heavy duty High Pressure Common performance. In the arm
unit for engine Rail (HPCR) system
Working Mode Application Advantage out function, a portion
Komatsu develops and produces all of the oil is returned
• Maximum production/power
major components, such as engines, P Power mode
• Fast cycle time directly to the tank
electronics and hydraulic components, • Good cycle time providing smooth
E Economy mode
in house. With this “Komatsu Technol- • Better fuel economy operation.
ogy” and adding customer feedback, Low Emission Engine Low Operation Noise • Suitable attachment speed
Komatsu is achieving great advance- L Lifting mode
• Lifting capacity is increased
Komatsu SAA6D114E-3 reduces NOx Enables low noise operation using the 7% by raising hydraulic
ments in technology. To achieve both
emission by 33% compared with the low-noise engine and methods to cut
pressure. Two-mode Setting for Boom
high levels of productivity and eco-
PC300LC-7. This engine is U.S. EPA noise at source. • Optimum engine rpm,
nomical performance, Komatsu has B Breaker mode
hydraulic flow Smooth mode provides easy operation for gathering blasted
developed the main components with a Tier 3 and EU Stage 3A emission
• Optimum engine rpm, rock or scraping down operation. When maximum digging
total control system. The result is a new equivalent. Attachment
ATT/P hydraulic flow, 2 way force is needed, switch to Power mode for more effective
Power mode
generation of high performance and Idling Caution • Power mode
excavating.
environment-friendly excavators. • Optimum engine rpm,
To prevent unnecessary fuel Attachment
ATT/E hydraulic flow, 2 way Smooth mode Power mode
Economy mode
consumption, an idling caution is • Economy mode

displayed on the monitor, if the engine

ECO gauge
idles for 5 minutes or more.
Maximum Drawbar Pull

Maximum drawbar pull Boom floats upward, reducing lifting Boom pushing force is increased,
of machine front. This facilitates ditch digging and box digging
provides superb steering and gathering blasted rock and scraping operation on hard ground are
slope climbing performance. down operations. improved.

Maximum drawbar pull:

264 kN (26900 kgf)

4 5
 HYDR AULIC EXCAVATOR PC300LC-8M0
COMFORT SAFETY

Slip-resistant Plates Large Side-view, Rear and Sidewise Mirrors

Highly durable slip-resistant plates maintain superior traction Large right-side mirror and additional rear & right side
performance for the long term. mirrors allow the PC300LC-8M0 to meet the visibility
requirements. (ISO 5006 : 2006)

Pump/Engine Room Partition

Pump/engine room partition prevents oil from spraying onto

Low Cab Noise Wide Cab Automatic Air Conditioner (A/C) the engine if a hydraulic hose bursts.

The cab is highly rigid and has Wide spacious cab includes seat with Enables you
excellent sound absorption ability. reclining backrest. The seat height and to easily and
Lock Lever
Thorough improvement of noise source longitudinal inclination are easily precisely set
reduction and use of low noise engine, adjusted using a pull-up lever. You can cab atmo-
Locks the hydraulic pressure to prevent unintentional
hydraulic equipment, and air condi- set the appropriate operational posture sphere with Thermal and Fan Guards
movement. Neutral start function allows machine to be
tioner allows this machine to generate of armrest together with the console. the instru-
started only in lock position.
a low level of noise. Reclining the seat further enables you ments on the large LCD. The bi-level Thermal and fan guards are placed around high-temperature
to place it into the fully flat state with control function keeps the operator’s parts of the engine and fan drive.

Low Vibration with Cab the headrest attached. head and feet cool and warm
Damper Mounting respectively. This improved air flow
function keeps the inside of the cab
PC300LC-8M0 uses viscous damper
comfortable throughout the year.
mounting for cab that incorporates
Defroster function keeps front glass
longer stroke and the addition of a
clear.
spring. The cab damper mounting
combined with high rigidity deck aids
vibration reduction at operator seat.

Rubber Pressurized Cab*

Spring
Standard air conditioner (A/C), air filter
Silicon
oil and higher internal air pressure
prevent external dust from entering
the cab.
*Non-A/C cabin optional

6 7
 HYDR AULIC EXCAVATOR PC300LC-8M0
ICT & KOMTRAX

LARGE HIGH RESOLUTION LCD MONITOR

Large LCD Monitor

A large user-friendly high resolution LCD

color monitor enables safe, accurate and assists customer’s equipment
smooth work. Visibility and resolution are management and contributes
further improved in 7-inch large LCD. Simple
to Fuel Cost Saving
and easy to operate switches. Function keys
facilitate multi-function operations. Displays
data in various languages to globally
support operators around the world. Equipment Management Support

KOMTRAX terminal installed on your machine collects and sends

information such as machine location, working record, machine
conditions, etc. using wireless communication. You can review the
KOMTRAX data remotely via the online application. KOMTRAX not
only gives you information on your machine, but the convenience
of managing your fleet on the web.

Energy-saving
Operation Report
KOMTRAX can provide various useful
information which includes the energy-saving
operation report created based on the
operating information of your machine such
Location as fuel consumption and idle time.

Supports Efficiency Improvement Equipment Management Monitoring System

Main screen display advices for promoting energy-saving Monitor function

operations. The operator can use the ECO guidance menu to Controller monitors engine
check the operation records, ECO guidance records, average oil level, coolant
fuel consumption logs, etc. temperature, battery charge
Movement generated position
air clogging, etc. If the
controller finds any

&
abnormality, it is displayed
on the LCD.

Maintenance function
The monitor informs
replacement time of oil and
ECO guidance ECO guidance menu
filters on the LCD when
the replacement interval is
reached.

Operation map
Trouble data memory function
Monitor stores abnormalities for effective troubleshooting. Image
ECO guidance
records

Operation records

Average fuel consumption logs Monthly status summary

8 9
 HYDR AULIC EXCAVATOR PC300LC-8M0
MAINTENANCE RELIABILITY

 asy Access to Engine Oil

E Equipped with the Fuel
Side-by-side Cooling High-Rigid Work Equipment
Filter and Fuel Drain Valve Pre-filter (With Water Separator)
Since radiator and oil cooler are Engine oil level gauge, and fuel filter are Removes water and contaminants in Boom and arms are constructed of thick plates of high of castings. The result is working attachments that exhibit long
arranged in parallel, it is easy to clean, one side mounted to improve the fuel to ensure clean fuel flow to tensile strength steel. In addition, these structures are term durability and high resistance to bending and torsional
remove and install them. accessibility. Engine oil filter and fuel engine. designed with large cross-sectional areas and generous use stress.
drain valve are remotely mounted to
improve accessibility.

Equipped with Drain Valve

as Standard
Prevents clothes and the ground from
becoming
contaminated
due to oil spillage
and facilitates
easy draining of
engine oil
during scheduled
maintenance.
Engine oil filter Fuel drain valve

High-capacity Air Cleaner

High capacity air cleaner is comparable Sturdy Frame Structure

to that of larger machines. The larger
air cleaner can extend air cleaner life The revolving frame, center frame and
during long-term operation and undercarriage are designed by using
prevents early the most advanced three-dimensional
clogging and Grease Sealed Track Track Link with Strut CAD and Finite Element Method (FEM)
resultant power analysis technology.
decrease. PC300LC-8M0 uses grease sealed PC300LC-8M0 uses track links with
Reliability is tracks for extended undercarriage life. strut, providing superb durability.
Highly Reliable Electronic
improved by a Devices
new seal design.
Exclusively designed electronic devices
have passed severe testing.
• Controller • Sensors
• Connectors • Heat resistant wiring

Reliable Components

Large Fuel Tank Capacity All major machine components, such

Strut as engine, hydraulic pumps, hydraulic
Grease
Large capacity, rust prevention Grease motors and control valves are
treated fuel tank extends exclusively designed and manufactured
operating hours before refueling. by Komatsu ensuring reliable
performance over long period of time.

10 11
 HYDR AULIC EXCAVATOR PC300LC-8M0
KOMATSU BUCKET SE SPEC.

Feature of [ME Bucket] (More suitable shape and Effectiveness Bucket) PC300LC-8M0 SE spec. is equipped with a large reinforced
ME bucket to increase the efficiency of loading a tipper with
large amount of loose materials.
* Bottom plate stays inside the tooth
High Productivity by Low-resistant path by the new bucket profile.
Excavation
The new Ideal bucket
profile produces lower
resistance inside &
outside bucket and
production will be Ground
level Tooth path
substantially increased.

SE Boom
KOMATSU "ME" Bucket with Larger Width

“ME” more efficient bucket options made available with Large bucket cylinder

additional wear plates and long service life Dent Preventing Plates
• Low resistant excavation • High durability
• High productivity • High fuel efficiency
Conventional “ME” Bucket

Category and Feature

Category Load / Wear / Soil (Application) Image

Load
Machine power is mostly medium, but occasionally high. Bucket movements
are smooth with minor shock load. Bucket penetrates easily.
Standard Wear
Material is lightly abrasive. Some sand may be medium abrasive.
Soil
Mostly loose sand, gravel and finely broken materials.

Load
High productivity by low-resistant excavation. Medium, but continuos load.
More Wear
Efficient Material is not abrasive.
“ME” Soil
Loose soil, sand & clay Larger Capacity "ME" Bucket

Load
Machine power is high during majority of the work. Medium, but continuous
shock load.
Heavy Duty
Wear
HD Material is abrasive. Light scratch marks can be seen at the bucket.
Soil
Limestone, shot rock, compact mix of sand, gravel and clay.

Bucket Line-up
Bucket PC300LC-8M0 Boom+Arm(m)
Weight
Working Capacity (Heaped) Width (mm) Tooth
(Cu.m (kg)
Category Condition Quantity
Without side with side with side 6.5+2.2 6+2.2
SAE
cutters cutters cutters

Soft gravel & 1.60 1522 1640 1580 6 x

General construction
Standard 2.10 1565 1685 1725 5

Iron Ore 1.60 1522 1640 1580 6 • •

More 1.90 1516 1616 1745 5
Efficient Irrigation & Soft soil work 2.10 1493 1593 1990 5
(ME) 2.30 1603 1703 2095 5 x
Heavy duty Blue metal Quarry,
1.40 1370 1474 1520 5 x
(HD) Limestone
: Material upto 2.4 ton/m3 : Material upto 1.8 ton/m3 : Material upto 1.5 ton/m3 : Not usable
Photos may include optional equipment.

12 13
 HYDR AULIC EXCAVATOR PC300LC-8M0
ATTACHMENT KOMATSU TOTAL SUPPORT

Komatsu Genuine Attachment Tool

A wide range of Komatsu-genuine attachment tools for hydraulic excavators

are provided to suit customers’ specific applications.

Hydraulic breaker
The hydraulic breaker is an attachment tool used for breaking rock beds and paved surfaces, demolishing
concrete structures, etc. The large gas chamber, ideal gas ratio and long-stroke piston deliver a
powerful impact force. Since the breaker unit does not require an accumulator, the number of
parts has been reduced, resulting in lower maintenance costs.

Komatsu breaker delivers high impact force with every blow thus, ideal choice for
primary & secondary breaking.

Model type JTHB350-3

Working weight kg 2790
Oil flow l/min 180 - 230 • Anti-Blank Blow System
Operating pressure MPa 13 - 18 • Accumulator FREE design
Impact rate bpm 350 - 450 • High Impact Energy Parts availability
Komatsu Total Support Komatsu Distributor is available for regular and emergency
• High Reliability & Durability
Chisel diameter mm ø 146
• Low Operating Cost requirements of the customers for supply of genuine and
To keep your machine available and minimize operation
quality guaranteed Komatsu parts.
costs, Komatsu Distributor provides total equipment
support before and after procuring the machine.
Technical support
Hydraulic Quick Coupler
Fleet recommendation Komatsu Distributor offers effective services for maintenance
Hydraulic Quick Coupler is used to facilitate frequent changes Fully Automatic (Hydraulic coupling) Komatsu Distributor will study the customer jobsite and and support of Komatsu machine.
•
between attachments such as bucket, breaker etc., thus, Twin Lock Mechanism provide the most optimum fleet recommendation with • Preventive Maintenance (PM) clinic
•
saves time and reduces operator fatigue. The Twin Lock Automatic Blocking System (ABS) detailed information to meet your application needs when you • Oil & Wear analysis program
•
series Hydraulic Quick Coupler is completely automatic and Blocking Bar are considering to buy new machines or to replace the • Undercarriage inspection service
•
with Automatic Blocking System makes the operation easy Lifting Eye existing ones. • Hose inspection
•
and safe. • Casting Manufacturing

Repair & maintenance service

Komatsu Distributor offers quality repair service and
Product support periodical maintenance to the customers, while utilizing and
Komatsu machines are supported by Larsen & Toubro’s promoting Komatsu programs.
strong nationwide network, parts outlets and service centers.

14 15
 HYDR AULIC EXCAVATOR PC300LC-8M0
SPECIFICATIONS

dimensions
engine swing system
Model PC300LC -8M0 PC300LC-8M0 SE SPEC.
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D114E-3 Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Type. . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear Boom Length 6470 mm 6000 mm
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled Swing circle lubrication. . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed Arm Length 2200 mm 2200 mm
Number of cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock Bucket Capacity 2.1 m3 2.3 m3
Bore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 mm Holding brake/Swing lock. . . . . . . . . . . . . . . . Mechanical disc brake A Overall length 11405 mm 10940 mm
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 mm Swing speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 min-1 B Length on ground (Transport) 6980 mm 4485 mm
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.27 L
C Overall height (To top of boom)* 3480 mm 3710 mm
Horsepower:
Model
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . . . Gross 194 kW 260 HP
ISO 9249 / SAE J1349. . . . . . . . . . . . . . . . . . . Net 187 kW 250 HP D Overall width 3190 mm
Rated rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 min-1 Undercarriage E Overall height (To top of cab)* 3135 mm
Fan drive method for radiator cooling . . . . . . . . . . . . . . . Mechanical F Ground clearance, counterweight 1185 mm
Center frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Governor. . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic G Ground clearance (Minimum) 500 mm
Track frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
U.S. EPA Tier 3 and EU Stage 3A emissions equivalent. Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track H Tail swing radius 3550 mm
Track adjuster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic I Track length on ground 4030 mm
Number of shoes (Each side):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 J Track length 4955 mm
Number of carrier rollers. . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side K Track gauge 2590 mm
Number of track rollers (Each side):. . . . . . . . . . . . . . . . . . . . . . . . . 8
L Width of crawler 3190 mm
Hydraulics
M Shoe width 600 mm
Type. . . HydrauMind (Hydraulic Mechanical Intelligence New Design) N Grouser height 36 mm
system, closed-center system with load sensing valves and O Machine cab height 2585 mm
pressure compensated valves Coolant and Lubricant Capacity
(refilling) P Machine cab width 3165 mm
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 6
Main pump: Q Distance, swing center to rear end 3510 mm
Fuel tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605 L
Type . . . . . . . . . . . . . . . . . . Two variable displacement piston type Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 L
Pumps for. . . . . . . . . Boom, arm, bucket, swing, and travel circuits Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 L
Maximum flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535 L/min Final drive (Each side). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 L
Supply for control circuit . . . . . . . . . . . . . . . . . . Self-reducing valve Swing drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 L
Hydraulic motors: Hydraulic tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 L
Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake
H
Swing . . . . . . . . . . 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits . . . . . . . . . . . . . . . . . . . . . 37.3 MPa 380 kg/cm2
Travel circuit. . . . . . . . . . . . . . . . . . . . . . . . . . 37.3 MPa 380 kg/cm2 operating weight (approximate)
Swing circuit. . . . . . . . . . . . . . . . . . . . . . . . . . 27.9 MPa 285 kg/cm2
Pilot circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kg/cm2 Operating weight including 6470 mm one-piece boom, 2200 mm
Hydraulic cylinders: arm, SAE J 296 heaped 2.10 m3 GP bucket, rated
(Number of cylinders – bore x stroke x rod diameter) capacity of lubricants, coolant, full fuel tank, operator, and
Boom . . . . . . . . . . . . . . . . . . . . . 2–140 mm x 1480 mm x 100 mm standard equipment.
Arm. . . . . . . . . . . . . . . . . . . . . . . 1–160 mm x 1825 mm x 110 mm
Bucket for 2.22 m arm. . . . . . . . 1–150 mm x 1285 mm x 110 mm PC300LC-8M0

Operating Ground
Shoes
Weight Pressure A
63.8 kPa
600 mm 33740 kg
0.65 kg/cm2 Q
P**

Drives and brakes Operating weight including 6000 mm one-piece boom, 2200 mm
arm, SAE J 296 heaped 2.30 m3 bucket, rated capacity of
Steering control. . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals lubricants, coolant, full fuel tank, operator, and standard equipment.
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull. . . . . . . . . . . . . . . . . . . . . . 264 kN 26900 kg PC300LC-8M0 SE Spec.
Gradeability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35° E* C*
Maximum travel speed: High . . . . . . . . . . . . . . . . . . . . . . . . 5.5 km/h Operating Ground O
Shoes
Weight Pressure
(Auto-shift) Mid. . . . . . . . . . . . . . . . . . . . . . . . . 4.5 km/h F
(Auto-shift) Low. . . . . . . . . . . . . . . . . . . . . . . . . 3.2 km/h
63.9 kPa
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock 600 mm 34100 kg
0.65 kg/cm2 G
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake M I N
K J
D,L B

16 17
 HYDR AULIC EXCAVATOR PC300LC-8M0

working range lifting capacity WITH LIFTING MODE

Model PC300LC-8M0 PC300LC-8M0 SE SPEC A PC300LC-8M0

Boom Length 6470 mm 6000 mm A: Reach from swing center
Arm Length 2220 mm 2200 mm B: Bucket hook height
C: Lifting capacity
A Max. digging height 9295 mm 9000 mm
Cf: Rating over front
B Max. dumping height 6365 mm 6055 mm B Cs: Rating over side
C Max. digging depth 6540 mm 6100 mm : Rating at maximum reach
C
D Max. vertical wall digging depth 2870 mm 2000 mm
E Max. digging depth of cut for 2440 mm level 6085 mm 5630 mm PC300LC-8M0 Boom: 6470 mm Arm: 2200 mm Bucket: 2.1 CUM
F Max. digging reach 10245 mm 9775 mm A MAX REACH 9.0m (29’) 7.5 m (24’) 6.0 m (19’) 4.5 m (14’) 3.0 m (9’) 1.5 m (4.5’)
G Max. digging reach at ground level 10045 mm 9540 mm B RADIUS Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
H Min. swing radius 4470 mm 4085 mm 7.5 m 6.63 m *7900 7300
228 kN 223 kN (24’) (21.7’) (17400) (16100)
SAE 1179 Rating

Bucket digging force at power max. 23300 kgf 22800 kgf 6.0 m 7.64 m *7600 5450 *7500 5700 * 8450 * 8450
51370 lb 50510 lb (19’) (25.1’) (16700) (12000) (16600) (12500) (18600) (18600)

225 kN 215 kN 4.5 m 8.27 m *7500 4550 *7900 5450 *9700 8250 *12700 *12700
(14’) (27.1’) (16600) (10000) (17400) (12100) (21400) (18100) (28000) (28000)
Arm crowd force at power max. 22900 kgf 21900 kgf
50490 lb 48350 lb 3.0 m 8.58 m 6950 4050 *8500 5200 *10900 7700
(9’) (28.1’) (15300) (9000) (18700) (11400) (24100) (17000)
259 kN 246 kN
1.5 m 8.62 m 6750 3900 8550 5000 *11750 7250
ISO 6015 Rating

Bucket digging force at power max. 26400 kgf 25100 kgf (4’) (28.3’) (14800) (8600) (18800) (11100) (26000) (16000)
58200 lb 55300 lb
0.0 m 8.39 m 6950 4000 8350 4850 *11950 6950
235 kN 224 kN (0’) (27.5’) (15300) (8800) (18400) (10700) (26400) (15400)
Arm crowd force at power max. 24000 kgf 22822 kgf –1.5 m 7.87 m 7650 4450 8300 4800 *11450 6900 *14950 11100
52910 lb 50360 lb (-4’) (25.8’) (16900) (9800) (18200) (10600) (25300) (15200) (33000) (24500)
–3.0 m 6.99 m * 7900 5450 *10000 7000 *12900 11300 *14300 *14300
(-9’) (22.9’) (17500) (12100) (22100) (15400) (28500) (24900) (31600) (31600)

H –4.5 m 5.58 m * 7150 *7150 *5800 *5800 *9400 *9400

(m) (-14’) (18.3’) (5800) (15800) (12800) (12800) (20800) (20800)
11 -6.0 m
(-19’)
10
*LOAD IS LIMITED BY HYDRAULIC CAPACITY RATHER THAN TIPPING. RATINGS ARE BASED ON SAE STANDARD No. J1097
9 RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC LIFT CAPACITY 75% OF TIPPING LOAD.

8
7
PC300LC-8M0 SE SPEC Boom: 6000 mm Arm: 2200 mm Bucket: 2.3 CUM
6 A MAX REACH 9.0m (29’) 7.5 m (24’) 6.0 m (19’) 4.5 m (14’) 3.0 m (9’) 1.5 m (4.5’)
5 B RADIUS Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
A 7.5 m 5.96 m *8500 *8500 *8200 *8200
4 (24’) (19.5’) (18900) (18900) (18000) (18000)
B
3 6.0 m 7.07 m
(19’) (23.2’)
*8100
(17900)
6150
(13600)
* 8550
(18900)
* 8500
(18700)
2 4.5 m 7.74 m *8000 5000 *8050 5300 *9550 8050 *12650 *12650
(14’) (25.4’) (17700) (11000) (17700) (11700) (21000) (17700) (27900) (27900)
1 3.0 m 8.08 m 7600 4450 *8550 5050 *10800 7650 *14900 12350
0 G.L. (9’) (26.5’) (16800) (9800) (18800) (11200) (23900) (16800) (32900) (27200)
1.5 m 8.12 m 7350 4250 8350 4850 *11700 7200 *16650 11450
-1 (4’) (26.6’) (16200) (9400) (18500) (10700) (25800) (15900) (36700) (25300)
0.0 m 7.88 m 7650 4000 8300 4800 *11900 6950 *16650 11150
-2 (0’) (25.8’) (16900) (9700) (18300) (10500) (26300) (15400) (36700) (24600)
-3 –1.5 m 7.32 m *8500 4950 8050 4750 *11300 6900 *15200 11200
D (-4’) (24.0’) (18700) (11000) (17800) (10400) (24900) (15200) (33500) (24700)
C E -4 –3.0 m 6.36 m * 8350 6400 *9400 7050 *12700 11400 *15250 *15250
(-9’) (20.9’) (18400) (14100) (20700) (15500) (28000) (25200) (33600) (33600)
-5
–4.5 m 4.76 m * 6950 * 6950 *8100 *8100
-6 (-14’) (15.6’) (15300) (15300 (17800) (17800)
-6.0 m
-7 (-19’)
-8 *LOAD IS LIMITED BY HYDRAULIC CAPACITY RATHER THAN TIPPING. RATINGS ARE BASED ON SAE STANDARD No. J1097
12 11 10 9 8 7 6 5 4 3 2 1 0 RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC LIFT CAPACITY 75% OF TIPPING LOAD.
(m)
2.44
G
F

18 19