0% found this document useful (0 votes)
68 views

R1234yf FP EN

Uploaded by

ben gruge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
68 views

R1234yf FP EN

Uploaded by

ben gruge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VIN-FP-223/006

R-1234yf
2,3,3,3-tetrafluoroprop-1-ene

GUARANTEED COMMERCIAL SPECIFICATIONS

STANDARD SPECIFICATION* LIMIT VALUE


Purity  99.5 % weight
Water content  20 ppm weight
Chlorine ion test (silver nitrate test) Negative
Total Acidity (HCL)  1 ppm weight
Non-condensable content (gas phase)  1.5 % volume
* (data producer)

MAIN APPLICATIONS

R-1234yf is a single component HFO. This product has a very low GWP figure and is
suitable for automotive air conditioning applications.
It may also be suitable as a R-134a replacement in other applications.

OILS
Use a poly alkylene glycol (PAG) oil for automotive air conditioning applications. For all other
applications use a polyol ester (POE) oil.

PRECAUTIONS OF USE
Refer to the Safety Data Sheet*.

REGULATION

The use and implementation of R-1234yf are governed by EU Regulation n° 517/2014.


The recovery of R-1234yf is mandatory under EU Regulation n° 517/2014.
(Refer to regulations enforced in each country)

* Find the Safety Data Sheet (SDS) directly on our website www.climalife.dehon.com
R-1234yf

PHYSIO-CHEMICAL PROPERTIES OF R-1234YF

Molar mass g/mol 114.04


Boiling point (at 1.013 bar) °C -29.49
Saturated fluid density at 25°C kg/m3 1092
Vapour density at boiling point kg/m3 5.980
Vapour pressure at:
25°C bar 6.83
50°C bar 13.02
Critical temperature °C 94.70
Critical pressure bar 33.82
Critical density kg/m3 476
Latent heat of vaporisation at boiling point kJ/kg 180.25
Thermal conductivity of liquid at 25°C W/m.K 0.064
Thermal conductivity of vapour at 1.013 bar W/m.K 0.014
Surface tension at 25°C 10-3N/m 6.17
Viscosity of liquid at 25°C 10-3 Pa.s 0.154
Viscosity of vapour at 1.013 bar 10-3 Pa.s 0.011
Specific heat of liquid at 25°C kJ/(kg.K) 1.392
Specific heat of vapour at 1.013 bar kJ/(kg.K) 0.905
Cp/Cv ratio at 25°C under 1.013 bar 1.099
Flammability in air Mildly flammable
Flashing point None
Classification NF-EN 378 A2L
ASHRAE A2L
PED PED Category 2
Ozone Depletion Potential 0
GWP
4th Assessment 4
5th Assessment 1

Please contact your distributor or Climalife sales department for more information. In
addition, if the refrigeration system you want to install, or are working on, does not appear to
be a typical installation, please do not hesitate to contact us for advice and information.

The information contained in this product sheet is the result of our studies and experience. It is provided in good faith, but should not, under any circumstance, be taken to constitute a guarantee on our part
or an assumption of our responsibility. This is particularly the case when third party rights are at stake or in situations where a user of one of our products fails to observe applicable regulations.

For more information, please visit our website:

http://www.climalife.dehon.com/contact_us

You might also like