Router Bits & Shank Tooling

Table of Contents – Section H

Standard Router & Drill Bits Carbide Insert Router Bits A

1 & 2 Flute Straight Cut Router Bits . . . . . . . . . . . . . . 5 Dedicated Insert Router Bits . . . . . . . . . . . . . . . . . . . 32
1 Flute Router Bits Staggered Tooth & Point Pilot . . . 6 Universal Insert Router Bits . . . . . . . . . . . . . . . . . . . 33 B

2 Flute Straight Cut Router Bits . . . . . . . . . . . . . . . . . 7 Dedicated Insert Router Bits . . . . . . . . . . . . . . . . . . . 39

2 Flute Straight Cut & Mortise Router Bits . . . . . . . . 9 Dedicated Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 C
2 Flute Helix Mortising Router Bits . . . . . . . . . . . . . . 10 Standard Insert Router Bits . . . . . . . . . . . . . . . . . . . . 52
2 Flute Pilot Router Bits . . . . . . . . . . . . . . . . . . . . . . . 11 Standard Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 D
2 Flute Round Nose Router Bits . . . . . . . . . . . . . . . . 12 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2 Flute Half Round & “V” Groove Router Bits . . . . . 13
E
2 Flute Dovetail Router Bits . . . . . . . . . . . . . . . . . . . 14
2 Flute Cove Box & Keyhole Router Bits . . . . . . . . . . 15
2 Flute Beading & Roman Ogee Router Bits . . . . . . 16 F

2 Flute Chamfering & Rabbeting Router Bits . . . . . . 17

2 Flute Roundover & Template Router Bits . . . . . . . 18 G
Flush Trim Laminate Router Bits . . . . . . . . . . . . . . . . 19
Replacement Cutters . . . . . . . . . . . . . . . . . . . . . . . . . 20 H
Replacement Bearings . . . . . . . . . . . . . . . . . . . . . . . . 21
Brad Point Dowel Drills . . . . . . . . . . . . . . . . . . . . . . . 22
I
Brad Point Spur Machine Drills . . . . . . . . . . . . . . . . . 23
Drill & Brad Point Center Drills . . . . . . . . . . . . . . . . . 25
Countersink, Counterbore Drills . . . . . . . . . . . . . . . . 26 J

Brad Point Dowel Drills . . . . . . . . . . . . . . . . . . . . . . . 26

Twist Drills & European Hinge Bits . . . . . . . . . . . . . . 27 K
1 Flute Straight Cut “O” Flute Router Bits . . . . . . . . 28
2 Flute Straight Cut “V” Flute Router Bits . . . . . . . . 29
1 Flute Straight & Spiral Panel Pilot Router Bits . . . 30

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 263
 1 & 2 Flute Straight Cut Router Bits
A Finish ground on the face and outside diameter which provides
a sharp cutting edge. Relief angles provide stability and strength
1 Flute Right-Hand Bit
as well as a free cutting bit. A versatile router bit excellent for
B various types of cuts such as dados, rabbet joints, plunge rout-
ing, mortise cuts, edging, trimming, sizing, etc. Recommended
for use on pin and CNC routers. Can be used with hand routers
C provided a fixture, jig or template are utilized.
1/4" Shank
D Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC119 1/4 3/4 2-1/4 1-1/4
RC123 1/4 1 2-1/2 1
E
RC126 1/4 1 3-1/8 1-3/4
RC129 9/32 3/4 2-1/4 1-1/4
F

3/8" Shank
G
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC211 3/8 1 2-5/8 1
H

1/2" Shank
I
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC214 3/8 1 2-5/8 1-3/8
J
RC215 3/8 1-1/4 2-7/8 1-3/8
RC216 1/2 1-1/4 2-7/8 1-3/8
K RC219 1/2 1-1/2 3-1/8 1-3/8
RC222 1/2 2 4-1/8 1-7/8
RC225 1/2 2-1/2 4-3/8 1-7/8

2 Flute Left-Hand Bit

3/4" Shank Left-hand

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC357L 3/4 2 5 3
RC359L 3/4 2-1/2 5-1/2 3

264 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 1 Flute Router Bits Staggered Tooth & Point Pilot
Staggered tooth arrangement reduces cutting pressures and A
horsepower requirements. Free cutting. Plunge endpoint for
fast entry into the material. Has the balance of a 2 flute de-
sign, maximum material removal and cutting thick hard to cut B
material. Use in applications when cutting material that has a
tendency to labor the motor.
C
1 Flute 1/2" Shank Staggered Tooth Router Bits
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length D
RC363 3/8 1-1/2 3-1/8 1-3/8
RC366 1/2 1-1/2 3-1/8 1-3/8
E
RC369 1/2 2-1/8 4 1-5/8

Drills its own hole with the plunge point. Single flute carbide tip H
used for cutting. The round base contacts the surface to follow
either the inside edge or a template. Use 1 flute for higher feed
rates and where rough cuts are acceptable. Excellent for ma- I
chining cutouts for windows, doors, etc. Rough cutout opera-
tions. Used in the R.V. and trailer manufacturing industry.
J
1 Flute 1/4" Shank with Plunge Point Pilot Router Bit
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length K
RC558 1/4 3/4 2-5/8 1-1/4

3/8" Shank with Plunge Point Pilot Router Bit

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC561 3/8 1 3-1/4 1-1/4

1/2" Shank with Plunge Point Pilot Router Bit

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC564 1/2 1-1/4 4 1-1/4

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 265
 2 Flute Straight Cut Router Bits
A A versatile router bit excellent for various types of cuts such as
dados, rabbets, plunge routing, mortise cuts, edging, trimming,
sizing, etc. Use 2 flute router bits when you require a good final
B cut and finish on the material. When using hand routers it is
recommended that you use a template or a guide system to
provide accurate cuts. Can also be used on pin and CNC routers.
C Use the smallest cutting edge length to reduce vibration and
the susceptibility to router bit breakage.

D
1/4" Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC135 1/4 1/2 2 1-1/4
E
RC141 1/4 3/4 2-1/4 1-1/4
RC144 1/4 1 2-1/2 1-1/4
F RC147L 1/4 1 2-1/2 1-1/4
RC149 1/4 1 3 1-3/4
G RC151* 1/4 1 3-1/4 2-1/4
RC153 9/32 1 3 7/8

H RC156 5/16 1 2-1/2 1-1/4

RC159 3/8 3/4 2-1/4 1-1/4
RC162 3/8 1 2-1/2 1-1/4
I
RC165 3/8 1-1/4 2-3/4 1-1/4
RC168 7/16 1 2-1/2 1-1/4
J
RC171 1/2 3/4 2-1/4 1-1/4
RC174 1/2 1 2-1/2 1-1/4
K RC177 9/16 3/4 2-1/4 1
RC179 5/8 3/4 2-1/8 1
RC183 11/16 3/4 2-1/8 1-1/4
RC186 3/4 3/4 2-1/8 1
RC189 1 3/4 2-1/8 1-1/4
* Widely Used on Air Routers

3/8" Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC212 3/8 1 2-5/8 1-3/8
RC213 3/8 1-1/4 3-5/8 2

266 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 2 Flute Straight Cut Router Bits
Carbide tipped for maximum wear. Use 2 flute router bits when A
you require a good final cut and finish on the material. A versa-
tile router bit excellent for various types of cuts such as dados,
rabbets, plunge routing, mortise cuts, edging, trimming, sizing, B
etc. Recommended for natural woods, plastics, man-made ma-
terial and aluminum.
C
1/2" Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length D
RC231 1/4 3/4 2-3/8 1-3/8
RC234 5/16 1 2-5/8 1-3/8
E
RC237 3/8 3/4 2-3/8 1-3/8
RC239 3/8 1 2-5/8 1-3/8
F
RC243 3/8 1-1/4 2-7/8 1-3/8
RC246 13/32 3/4 2-1/2 1-3/8
RC249 7/16 1-1/4 2-7/8 1-3/8 G

RC252 1/2 1 2-5/8 1-3/8

RC255 1/2 1-1/4 2-7/8 1-3/8 H
RC258 1/2 1-1/2 3-1/8 1-3/8
RC261 1/2 1-1/2 4-1/8 2-3/8 I
RC264 1/2 2 3-1/2 1-1/4
RC267 1/2 2 4 1-7/8
J
RC269 1/2 2-1/2 4-1/2 1-3/4
RC273 17/32 1-1/4 2-7/8 1-3/8
RC276 9/16 1-1/4 3 1-3/8 K

RC279 5/8 1 2-1/2 1-3/8

RC282 5/8 1-1/4 3 1-7/16
RC285 5/8 1-1/2 3 1-3/8
RC288 5/8 2 4 1-3/4
RC291 11/16 1 2-1/2 1-3/8
RC294 11/16 1-1/4 3 1-3/8
RC297 3/4 1 2-3/4 1-3/8
RC298 3/4 1-1/4 3 1-7/16
RC299 3/4 1-1/2 3-1/4 1-3/8
RC311 3/4 2 3-5/8 1-3/8
RC312 13/16 1-1/4 3 1-7/16
RC313 7/8 1-1/4 3 1-3/8
RC315 1 1-1/4 3 1-7/16
RC318 1 1-1/2 3 1-3/8

Continued on next page…

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 267
 2 Flute Straight Cut & Mortise Router Bits
A

B
1/2" Shank (continued from previous page)
C Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC321 1 2 3-3/4 1-3/8
RC324 1-1/8 1-1/2 3 1-3/8
D
RC327 1-1/4 1-1/2 3 1-3/8
RC329 1-3/8 1-1/4 3 1-3/8
E
RC333 1-1/2 1-1/4 3 1-3/8
RC336 1-3/4 1-1/4 3 1-3/8
F RC339 2 1-1/4 3 1-3/8

G
Carbide tipped for maximum wear. Use 2 flute router bits when
you require a good final cut and finish on the material. A versa-
H tile router bit excellent for various types of cuts such as dados,
rabbets, plunge routing, mortise cuts, edging, trimming, sizing,
etc. Recommended for natural woods, plastics, man-made ma-
I 3/4" Shank terial and aluminum.

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
J
RC345 3/4 1-1/4 3 1-1/2
RC348 3/4 1-1/2 3-1/4 1-1/2
K RC351 3/4 2 4 1-3/4
RC354 3/4 2-1/2 4-1/2 2-1/4

Designed to provide clean splinter free edges on the material.

Large gullet area between the flutes to facilitate fast chip re-
moval. Can be use to cut both mortise and tenons using the
same router bit. Produces a flat bottom cut on the material.
Various cutting diameters are available to match the radius
found on door hinges. The cutting action of each bit is designed
to produce a smooth flat bottom cut.
1/4" Shank Mortise

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC375 1/2 3/4 2-1/8 1-1/4
RC345 3/4 1-1/4 3 1-1/2
RC348 3/4 1-1/2 3-1/4 1-1/2
RC351 3/4 2 4 1-3/4
RC354 3/4 2-1/2 4-1/2 2-1/4
*RC387 Hs 1/2" Shnk Dimeter

268 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 2 Flute Helix Mortising Router Bits
Designed with a downward shear direction to provide clean A
splinter free edges on the material. Carbide tipped cutter is re-
movable from the threaded shaft. Includes both the cutter and
Down-Shear the threaded shank. Can be use to cut both mortise and tenons B
using the same router bit. Produces a flat bottom cut on the
material. Various cutting diameters are available to match the
radius found on door hinges. The cutting action of each bit is C
designed to produce a smooth flat bottom cuts.

With Down Shear - (Screw on Type) D

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC393 1/2 5/8 7/8 1/4-28 E
RC396 33/64 5/8 7/8 1/4-28
RC397 5/8 5/8 7/8 14-28
F
RC399 41/64 5/8 7/8 1/4-28
RC411 11/16 5/8 7/8 1/4-28
G
RC412 3/4 5/8 7/8 1/4-28
RC413 49/64 5/8 7/8 1/4-28
RC414 13/16 5/8 7/8 1/4-28 H
RC415 7/8 5/8 7/8 1/4-28
RC417 1 1/2 1/2 1/4-28 I
RC419 1-1/8 1/2 1/2 1/4-28
RC423 1-1/4 1/2 1/2 1/4-28
J

Replacement Arbor for the Helix Mortise Bit

Replacement Arbor
Part No. Arbor Diameter Overall Length Thread Size
RP111 1/4 1-3/4 1/4-28
RP114 3/8 1-3/4 1/4-28

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 269
 2 Flute Pilot Router Bits
A Drills its own hole with the plunge point. Single flute carbide
tip used for cutting. The round base contacts the surface to fol-
low either the inside edge or a template. Use 2 flute for lower
B feed rates and where better finishes are desired. Excellent for
machining cutouts for windows, doors, etc. Finish cutout opera-
tions. Used in the R.V. and trailer manufacturing industry.
C
1/4" Shank with Plunge Point
D Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC567 3/8 1 3-1/4 1-1/4

E
3/8" Shank with Plunge Point
F Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC569 3/8 1 3 1-1/4

G
1/2" Shank with Plunge Point
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
H
RC573 1/2 1-1/4 4 1-1/4

270 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 2 Flute Round Nose Router Bits
Features Extra long carbide for deep cuts. Can plunge cut for ac- A
curate positioning and stock removal. Excellent choice for sign
making applications. Also used for grooving and stock removal
in raised letter signs and bowls. Also used for fluting and other B
architectural work.

C
1/4" Shank
Part No. Cutting Diameter Cutting Radius Cut Edge Length Overall Length D
RS101 1/8 1/16 1/4 2
RS102 3/16 3/32 3/8 2
E
RS103 1/4 1/8 1/2 2
RC426 3/8 3/16 5/16 1-15/16
F
RC429 1/2 1/4 5/8 2-1/4
RC432 5/8 5/16 7/16 2-1/16
RC435 3/4 3/8 1/2 2-1/8 G

1/2" Shank H

Part No. Cutting Diameter Cutting Radius Cut Edge Length Overall Length
RC438 3/8 3/16 1 2-5/8 I

RC441 1/2 1/4 1-1/4 2-7/8

RC444 5/8 5/16 1-1/4 2-7/8 J
RC447 3/4 3/8 1-1/4 2-3/4
RC449 1 1/2 1-1/4 2-3/4
K
RC450 1-1/4 5/8 1-1/4 3
RC451 1-1/2 3/4 1-1/4 3
RC452 1-3/4 7/8 1-3/4 3
RC454 2 1 1-1/4 3

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 271
 2 Flute Half Round & “V” Groove Router Bits
A Carbide flutes available in popular cutting radii for various
projects. Corner softening. Used to produce a half round or
bullnose on material. Common uses are stair treads, furniture
B arms, shelves, window sills, etc.

C
Bullnose Half Round
D Part No. Cutting Radius Shank Diameter Opening of Cutter Shank Length
RC453 3/32 1/4 3/16 13/16
RC456 1/8 1/4 1/4 13/16
E
RC459 3/16 1/4 3/8 1-1/4
RC462 1/4 1/4 1/2 1-1/2
F
RC465 3/32 1/2 3/16 1-1/2
RC468 1/8 1/2 1/4 1-1/2
G RC471 3/16 1/2 3/8 1-3/8
RC474 1/4 1/2 1/2 1-3/4
H RC477 3/8 1/2 3/4 1-3/4
RC479 1/2 1/2 1 15/16

I RC483 5/8 1/2 1-1/4 15/16

J
The 90B produces a true 90B cut and is designed for decora-
tive work only. It is not intended for use with V-fold or mitering
K systems. Use for freehand and machine routing. Designed for
intricate sign making and decorative cuts. Use the 60B for vein-
90° “V” Groove 60° “V” Groove ing, incised sign lettering and decorative cuts.

60° & 90° Angles "V" Groove

Part No. Cutting Diameter Shank Diameter Cutting Depth Overall Length
90° “V” Groovers - Decorative
RC486* 1/4 1/4 1/4 1-1/2
RC489 3/8 1/4 1/2 1-11/16
RC492 1/2 1/4 1/2 1-3/4
RC495 3/4 1/2 5/8 2-1/8
RC499 1-1/2 1/2 1 3
60° “V” Groovers - Veining nd Sign Lettering
RC501* 1/4 1/4 1/4 1-1/2
RC502* 1/2 1/4 1/2 2
RC503 1/2 1/2 1/2 2-1/4
*Solid Carbide Router Bit

272 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 2 Flute Dovetail Router Bits
Available in popular 9 and 14 degree angles as well as left hand A
rotations. Produces the ultimate interlocking joinery for drawer
fronts, case work, etc. Can be used in hand router applications
and dovetail fixtures and template guide systems. Also use in B
the stair manufacturing industry. Some bits are compatable for
use in Incra™, OmniJig®, and JoinTech™ Systems.
C
1/4" Shank - Right-hand
D
Part No. Degree Each Side Large Diameter Depth of Cut Overall Length
1RC511 9° 3/8" 3/8 2
E
2RC512 14° 1/2 1/2 2

F
3/8" Shank - Right-hand
Part No. Degree Each Side Large Diameter Depth of Cut Overall Length
G
RC513 9° 3/8 3/8 2

H
1/2" Shank - Right-hand
Part No. Degree Each Side Large Diameter Depth of Cut Overall Length
I
RC516 9° 3/8 3/8 2-1/2
2RC519 14° 1/2 1/2 2-1/2
1RC522 7° 5/8 7/8 2-5/8 J
1RC525 7° 3/4 7/8 2-5/8
3RC528 7° 7/8 7/8 2-1/2 K
RC531 14° 1 7/8 2-1/2

1/2" Shank -Left-hand

Part No. Degree Each Side Large Diameter Depth of Cut Overall Length
RC546L 9° 3/8 3/8 2
2RC549L 14° 1/2 1/2 2-1/2
3RC555L 7° 7/8 7/8 2-1/2

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 273
 2 Flute Cove Box & Keyhole Router Bits
A Select radii for use in numerous applications. Balanced 2 flute
design for smooth cutting and excellent finishes. Adds a deco-
rative touch to drawer fronts, furniture and cabinet doors. Can
B also be used for drop-leaf construction of table tops by match-
ing the radius with our roundover bits.

C
Cove Box with Bearing
D Part No. Cutting Radius Large Diameter Shank Size Cut Edge Length
RC576 3/16 7/8 1/4 1/2
RC579 1/4 1 1/4 1/2
E
RC582 3/8 1-1/4 1/4 9/16
RC585 1/2 1-1/2 1/4 5/8
F
RC588 1/4 1 1/2 1/2
RC591 3/8 1-1/4 1/2 9/16
G RC594 1/2 1-1/2 1/2 5/8
RC595 5/8 1-3/4 1/2 3/4
H RC596 3/4 2 1/2 7/8
RC597 1 2-1/2 1/2 1
All Cove Bits Above Use a B3 Bearing
I

K
The bit plunge cuts a round hole into the back of the item to
be mounted. Then by moving the router horizontally the large
diameter cuts a hole beneath the small diameter creating a re-
cessed (stepped) area for the screw or nail to lock into. A fast
and easy method of mounting plaques, picture frames and oth-
er items flush to a wall. The use of a plunge type hand router
is recommended. Can also be used with a pin or CNC router.

2 Flute Keyhole Router Bits

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RC111 3/8 3/16 1/4 1-1/2

274 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 2 Flute Beading & Roman Ogee Router Bits
Provides an inset bead along the lower edge of the workpiece. A
By changing the cutting depth, a step can be employed on both
the top and the bottom of the bead. Great for decorative cuts
and adding details to workpiece edges. B

C
Beading with Bearing
Part No. Cutting Radius Large Diameter Shank Diameter Carbide Height D
RC666 1/4 1 1/4 1/2
RC669 5/16 1-1/8 1/4 1/2
E
RC672 3/8 1-1/4 1/4 5/8
RC675 1/2 1-1/2 1/4 13/16
F
RC678 1/4 1 1/2 1/2
RC681 3/8 1-1/4 1/2 11/16
RC684 1/2 1-1/2 1/2 13/16 G

RC687 3/4 2 1/2 1

All Router Bits use a B2 Bearing H

A common decorative edge used to increase the attractiveness

of an edge. Popular on table tops and tables. By changing the K
bearing size, the bead depth can be reduced to allow for a dif-
ferent look of the profile.

Roman Ogee with Bearing

Part No. Cutting Radius Large Diameter Shank Diameter Carbide Height
RC689 5/32 1-1/8 1/4 15/32
RC699 1/4 1-1/2 1/4 23/32
RC693 5/32 1-1/8 1/2 15/32
RC696 1/4 1-1/2 1/2 23/32
RC697 3/8 2 1/2 1
All Router Bits use a B3 Bearing

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 275
 2 Flute Chamfering & Rabbeting Router Bits
A Breaks the sharp corners of an edge and strengthens the cor-
ner. By adjusting the cutting height of the bit an endless variety
of chamfers can be created. Use to produce decorative pieces
B and break the corners in timber.

C
Chamfer with Bearing
D Part No. Degree of Angle Carbide Length Shank Diameter Overall Length
RC711 15° 1/2 1/4 2
RC712 25° 1/2 1/4 2
E
RC713 45° 17/32 1/4 2-1/8
RC714 45° 17/32 1/2 2-7/16
F
RC715 45° 1 1/2 2-1/2
All Router Bits use a B3 Bearing
G

I Change the depth by changing the bearing.

Use Bearing #B2 To produce a 7/16" Rabbet
J Use Bearing #B7 To produce a 5/16" Rabbet
Use Bearing #B8 To produce a 1/4"Rabbet
Produces a “step” cut more commonly called a rabbet for join-
K
ery. Used in furniture and cabinet cuts for recessing backs, etc.

1/4" Shank Rabbeting

Part No. Large Diameter Rabbet Depth Cut Edge Length Shank Length
RC599 1-1/4 3/8 1/2 2-1/8
Uses a B3 Bearing

1/2" Shank
Part No. Large Diameter Rabbet Depth Cut Edge Length Shank Length
RC611 1-1/4 3/8 1/2 2-1/4

276 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 2 Flute Roundover & Template Router Bits
Ideal for rounding sharp corners and softening edges of fur- A
niture. Add a decorative touch by increasing the depth of cut
until the shoulder produces a clean corner on the material.
By changing the bearing you can convert a roundover bit to a B
beading bit.

C
Corner Round
Part No. Cutting Radius Large Diameter Shank Diameter Carbide Height D
RC612 1/16 5/8 1/4 1/2
RC613 1/8 3/4 1/4 1/2
E
RC614 3/16 7/8 1/4 1/2
RC615 1/4 1 1/4 1/2
F
RC618 5/16 1-1/8 1/4 9/16
RC621 3/8 1-1/4 1/4 5/8
RC624 1/2 1-1/2 1/4 3/4 G

RC625 3/16 7/8 1/2 1/2

RC627 1/4 1 1/2 13/16 H
RC629 5/16 1-1/8" 1/2 1/2
RC633 3/8 1-1/4 1/2 5/8
I
RC636 1/2 1-1/2 1/2 13/16
RC639 5/8 1-3/4 1/2 1
J
RC642 3/4 2 1/2 1
RC645 7/8 2-1/4 1/2 1-1/8
RC648 1 2-1/2 1/2 1-5/16 K

RC651 1-1/8 3 1/2 1-1/2

RC654 1-1/4 3-1/4 1/2 1-3/4
RC657 1-3/8 3-1/2 1/2 1-3/4
RC659 1-1/2 3-3/4 1/2 1-7/8
Replacement Bearings: Use a B3 Bearing for RC612 - RC648. Use a B4 Bearing for RC651 - RC659

Engineered with a bearing above the cutting flutes. Designed

so that a template or jig can be placed on top of the workpiece.
Allows easy visibility of the workpiece. Top bearing follows the
template for accurate 1:1 duplication.
Template

Top Bearing Template

Workpiece

Part No. Cutting Diameter Cut Edge Length Shank Diameter Overall Length
RC778 1/2 1/4 1/4 1-7/8
RC780 1/2 3/4 1/4 2-1/4
RC781 1/2 1 1/4 2-1/2
RC782 1-1/8 1-1/2 1/2 3-1/2
Use a B9 Bearing for Router Bits RC778 to RC782

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 277
 Flush Trim Laminate Router Bits
A Used on kitchen counter tops and display case goods where the
edge of a laminate must be trimmed flush to the edge or top
of the material. Can be used on both plastic laminates and solid
B wood veneers. Use the 3 flute for even better finishes and on
materials that tend to chip.

C
2 Flute - Bottom Bearing
D Part No. Cutting Diameter Cut Edge Length Shank Diameter Overall Length
RC719 3/8 1 1/4 2-5/8
RC723 3/8 1/2 1/4 2-1/8
E
RC726 1/2 1 1/4 2-11/16
RC729 1/2 1/2 1/4 2-3/16
F
RC735 1/2 1 1/2 3-1/4
RC738 1/2 1/2 1/2 2-3/4
G RC741 1/2 1-1/2 1/2 3-5/8
RC744 1/2 2 1/2 4-1/4
H Use a B1 Bearing for Router Bits RC719 to RC723

I 3 Flute - Bottom Bearing

Part No. Cutting Diameter Cut Edge Length Shank Diameter Overall Length
J RC747 1/2 1 1/4 2-9/16
RC749 1/2 1/2 1/4 2-1/8
RC753 1/2 1 1/2 3-1/4
K
RC756 1/2 1/2 1/2 2-3/4
RC759 1/2 1-1/2 1/2 3-5/8
RC760 1/2 2 1/2 4
All router bits use a B3 Bearing

278 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Replacement Cutters
Slotting cutters are an excellent choice for cutting slots to ac- A
cept “T” mouldings, Extrausions, etc. Available in a variety of
kerfs that are typically found in this industry. By selecting vari-
ous bearing sizes the depth of cut can be controlled. B

C
3 Wing Slotting
Part No. Cutting Diameter Bore Size Kerf Decimal Fractional Inch D
RC990 1-7/8 5/16 .062 1/16
RC991 1-7/8 5/16 .094 3/32
E
RC992 1-7/8 5/16 .125 1/8
RC993 1-7/8 5/16 .156 5/32
F
RC994 1-7/8 5/16 .250 1/4

Replacement arbor with a threaded 5/16 end and includes a B5 bearing which will produce a 1/2 depth of cut. Use the following chart
to determine the correct bearing to order for additional depths of cut. H
Use B5 bearing for a 1/2 depth of cut
Use B20 bearing for a 9/16 depth of cut
I
Use B25 bearing for a 3/8 depth of cut
Use B26 bearing for a 1/4 depth of cut
J
Use B27 bearing for a 5/8 depth of cut

K
Arbors for Sloting
Part No. Shank Size Threaded End Overall Length Includes Bearing
RP101 1/4 5/16 2-3/8 B5
RP102 3/8 5/16 2-3/8 B5
RP103 1/2 5/16 2-3/8 B5
RP104 1/2 5/16 4 B5

Includes a B5 bearing for a 1/2” depth of cut

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 279
 Replacement Bearings
A Replacement sealed bearings for long life and trouble free
performance.

C
Part No. Reference Number Outside Diameter Inside Diameter Bearing Type
D RP117 B1 3/8 1/8 Sealed
RP119 B2 3/8 3/16 Sealed
RP123 B3 1/2 3/16 Sealed
E
RP125 B9 1/2 1/4 Sealed
RP126 B4 3/4 1/4 Sealed
F
RP129 B5 7/8 5/16 Sealed
RP132 B6 5/8 1/4 Sealed
G RP135 B7 5/8 3/16 Sealed
RP138 B8 3/4 3/16 Sealed
H RP137 B11 1-1/8 1/2 Sealed
RP139 B20 3/4 5/16 Sealed
RP140 B25 1-1/8 5/16 Sealed
I
RP142 B26 1-3/8 5/16 Sealed
RP143 B27 5/8 5/16 Sealed
J

280 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Brad Point Dowel Drills
Made of the finest carbon steel and heat treated. Precision A
ground for exacting tolerances. Shoulder on shank has a pin
hole for easy removal on the machinery. Used for drilling clean
holes in natural wood for doweling operations. Economical drill B
with good wear and tool life characteristics.

Carbon Steel-Screw Shank D

Part No. Cutting Diameter Twist Length Overall Length Threaded Shank Rotation Direction
B111 1/8 3 4-1/2 7/16-14 R
E
B141L 3/8 3 4-1/2 7/16-14 L

Same as page 25 except manufactured from Super Wear Steel.

G
Requires less tool changes for sharpenings. Provides excellent
wear and tool life characteristics.

H
Super Wear Steel - Extended Screw Shank
Part No. Cutting Diameter Twist Length Overall Length Threaded Shank Rotation Direction
I
BW138 3/8 1-3/4 4-1/2 7/16-14 R
BW141 7/16 1-3/4 4-1/2 7/16-14 R
BW144 3/8 1-3/4 4-1/2 7/16-14 L J

Extended shank provides stability and rigidity especially when

using small cutting diameters. Designed primarily for the Bell
24 Double End Miter and Boring Machine. Can also be used on
other machines where runout/walking is a problem. Provides
Rigidity.

Super Wear Steel - Screw Shank

Part No. Cutting Diameter Twist Length Overall Length Threaded Shank Rotation Direction
BW111 3/16 3 4-1/2 7/16-14 R
BW114 1/4 1-1/4 4-1/2 7/16-14 R
BW117 9/32 3 4-1/2 7/16-14 R
BW123 3/8 3 4-1/2 7/16-14 R
BW126 7/16 3 4-1/2 7/16-14 R
BW129 1/2 3 4-1/2 7/16-14 R

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 281
 Brad Point Spur Machine Drills
A These machine drills are ground from hardened steel to main-
tain their accuracy. Two spurs cut in advance of the chip lifter.
Versatile machine drills widely used for cross-grain boring and
B other applications that require smooth accurate holes.

Carbon Steel
C Part No. Cutting Diameter Twist Length Overall Length Shank Size
B147 3/16 3 5 1/2x2
D B149 7/32 3 5 1/2x2
B153 1/4 3 5 1/2x2

E B156 5/16 3 5 1/2x2

B159 7/16 3 5 1/2x2
B162 3/16 4 6 1/2x2
F
B165 7/32 4 6 1/2x2
B168 1/4 4 6 1/2x2
G
B171 5/16 4 6 1/2x2
B174 11/32 4 6 1/2x2
H B177 3/8 4 6 1/2x2
B179 7/16 4 6 1/2x2

I B183 1/2 4 6 1/2x2

B186 9/16 4 6 1/2x2
B189 5/8 4 6 1/2x2
J
B192 3/4 4 6 1/2x2
B195 1 4 6 1/2x2
K

Provides longer tool life and wear than the carbon steel drills.
Used for cross-grain boring and other work where smooth ac-
curate holes are required. Two spurs cut in advance of the chip
lifter.

Super Wear Steel

Part No. Cutting Diameter Twist Length Overall Length Shank Size
BW147 3/16 3 5 1/2x2
BW149 1/4 3 5 1/2x2
BW153 9/32 3 5 1/2x2
BW156 5/16 3 5 1/2x2
BW159 11/32 3 5 1/2x2
BW162 3/8 3 5 1/2x2
BW165 7/16 3 5 1/2x2
BW168 1/2 3 5 1/2x2
BW171 1/4 4 6 1/2x2
BW174 9/32 4 6 1/2x2

Continues on next page…

282 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Brad Point Spur Machine Drills
A
Provides longer tool life and wear than the carbon steel drills.
Used for cross-grain boring and other work where smooth ac-
curate holes are required. Two spurs cut in advance of the chip B
lifter.

Super Wear Steel (continued from previous page) C

Part No. Cutting Diameter Twist Length Overall Length Shank Size
BW177 5/16 4 6 1/2x2 D
BW179 11/32 4 6 1/2x2
BW183 3/8 4 6 1/2x2
E
BW186 13/32 4 6 1/2x2
BW189 7/16 4 6 1/2x2
BW192 1/2 4 6 1/2x2 F

BW195 17/32 4 6 1/2x2

BW198 9/16 4 6 1/2x2 G
BW211 5/8 4 6 1/2x2
BW212 11/16 4 6 1/2x2 H
BW213 3/4 4 6 1/2x2
BW214 13/16 4 6 1/2x2
I
BW215 7/8 4 6 1/2x2
BW216 15/16 4 6 1/2x2
J
BW219 1 4 6 1/2x2

K
Provides longer tool life and wear than super wear steel. Use for
man-made materials such as plastics, chip core and other hard
to drill materials.

Carbide Tipped
Part No. Cutting Diameter Twist Length Overall Length Shank Size
BC111 1/4 3 5 1/2x2
BC114 5/16 3 5 1/2x2
BC117 3/8 3 5 1/2x2
BC119 7/16 3 5 1/2x2
BC123 1/2 3 5 1/2x2
BC126 5/8 3 5 1/2x2
BC129 3/4 3 5 1/2x2
BC132 1/4 4 6 1/2x2
BC135 5/16 4 6 1/2x2
BC138 3/8 4 6 1/2x2
BC141 7/16 4 6 1/2x2
BC144 1/2 4 6 1/2x2
BC147 5/8 4 6 1/2x2

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 283
 Drill & Brad Point Center Drills
A Provides longer tool life and wear over carbon steel. Shank di-
ameter is the same as the cutting diameter. Designed for cross-
grain boring and other boring operations. Used with the coun-
B terbore and countersink tools on page 32.

C 4-1/2" Long - High Speed Steel - Straight Shank Drill Point

Part No. Cutting Diameter Twist Length Overall Length Shank Size
D BH131 1/8 2-1/4 4-1/2 1/8
BH132 3/16 2-1/4 4-1/2 3/16

6" Long - High Speed Steel - Straight Shank Drill Point

F Part No. Cutting Diameter Twist Length Overall Length Shank Size
BH113 1/8 2-1/4 6 1/8

G BH111 3/16 2-1/4 6 3/16

BH115 5/32 2-1/4 6 5/32
BH116 7/32 2-1/4 6 7/32
H

J
Provides longer tool life and wear over carbon steel. Shank di-
ameter is the same as the cutting diameter. Used with the coun-
terbore and countersink tools on page 285.
K

4-1/2" Long - High Speed Steel - Straight Shank Brad Point

Part No. Cutting Diameter Twist Length Overall Length Shank Size
BH126 1/8 2-1/4 4-1/2 1/8
BH129 3/16 2-1/4 4-1/2 3/16

6" Long - High Speed Steel - Straight Shank Brad Point

Part No. Cutting Diameter Twist Length Overall Length Shank Size
BH112 1/8 2-1/4 6 1/8
BH114 5/32 2-1/4 6 5/32
BH117 3/16 2-1/4 6 3/16
BH119 7/32 2-1/4 6 7/32
BH123 1/4 2-1/4 6 1/4

284 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Countersink, Counterbore Drills & Brad Point Dowel Drills
82 degree countersink design. Double fluted for fast chip re- A
moval. Drill is held by split and set screw. For seating flathead
screws.
B
Adjustable Countersink - 1/2" x 2" Shank - Carbon Steel
Part No. C-Sink Diameter Drill Size Twist Length Overall Length C
B229 3/8 3/16 2-1/4 4-1/2
B233 1/2 3/16 2-1/4 4-1/2
D
Center Drill not included

Double fluted for fast chip removal. Drill is held by split and set E
screw. Bores smooth flat bottom holes.

Adjustable Counterbore - 1/2" x 2" Shank - Carbon Steel F

Part No. C-Sink Diameter Drill Size Twist Length Overall Length
B236 3/8 3/16 2-1/2 4-1/2 G
B239 7/16 7/32 2-1/2 4-1/2
B242 1/2 3/16 2-1/2 4-1/2 H
B245 1/2 7/32 2-1/2 4-1/2
B248 1/2 1/4 2-1/2 4-1/2
I
Center Drill not included

J
Shanks are 10mm with a machined flat and adjusting screw. For
use on European boring machines. Used for adjustable shelving
and concealed hinges. K

Standard Drills - Carbide Tipped Dowel

Part No. Cutting Diameter Overall Length Flute Length Shank Size
BC149 5 57.5 30 10x20
BC153L 5 57.5 30 10x20
BC156 6 57.5 30 10x20
BC159L 6 57.5 30 10x20
BC162 8 57.5 30 10x20
BC165L 8 57.5 30 10x20
BC168 10 57.5 30 10x20
BC171L 10 57.5 30 10x20

Long Drills - Carbide Tipped Dowel

Part No. Cutting Diameter Overall Length Flute Length Shank Size
BC174 5 70 35 10x30
BC177L 5 70 35 10x30
BC179 8 70 35 10x30
BC183L 8 70 35 10x30

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 285
 Twist Drills & European Hinge Bits
A Shanks are 10mm with a machined flat and adjusting screw.
Provides clean through holes on the back side of the material.

For Through Holes - Carbide Tipped

C Part No. Cutting Diameter Overall Diameter Flute Length Shank Size
BC186 5 57.5 10 R

D BC189L 5 57.5 10 L
BC192 5 70 10 R
BC195L 5 70 10 L
E
BC198 8 70 10 R
BC211L 8 70 10 L
F

G
Has a 10 x 26 shank with a machined flat and adjusting screw.
For European boring machines. Used for the concealed hinge
H systems.

I
Carbide Tipped European Hinge Bits
Part No. Cutting Diameter Overall Length Shank Diameter Shank Length
J
BC212 15 57.5 10 26
BC213L 15 57.5 10 26
K BC214 20 57.5 10 26
BC215L 20 57.5 10 26
BC216 25 57.5 10 26
BC219L 25 57.5 10 26
BC222 35 57.5 10 26
BC225L 35 57.5 10 26

286 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 1 Flute Straight Cut “O” Flute Router Bits
Made from High Speed Steel. Use 1 flute router bits when you A
require a freer cutting bit using high feed rates. A versatile rout-
er bit excellent for various types of cuts such as dados, rabbets,
plunge routing, mortise cuts, edging, trimming, sizing, etc. Rec- B
ommended for natural woods, plastics and aluminum.

C
High Speed Steel - 1/4" Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
D
RH162 1/16 1/4 1-15/16 1-3/16
RH165 3/32 3/8 2 7/8
RH168 1/8 5/8 2-3/16 1-1/4 E

RH171 5/32 1/2 2 7/8

RH174 3/16 3/4 2-13/16 1-7/16 F
RH179 1/4 3/4 2 13/16
RH183 1/4 1 2-1/4 13/16
G
RH186 1/4 1-1/4 2-1/2 7/8

H
High Speed Steel - 1/2" Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length I
RH192 1/2 1-1/4 3-1/8 13/16

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 287
 2 Flute Straight Cut “V” Flute Router Bits
A Made from High Speed Steel. Use 2 flute router bits when you
require a good final cut. A versatile router bit excellent for
various types of cuts such as dados, rabbets, plunge routing,
B mortise cuts, edging, trimming, sizing, etc. Recommended for
natural woods, plastics and aluminum.

C
High Speed Steel - 1/4" Shank
D Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RH111 3/16 5/8 2 11/16
RH117 1/4 3/4 2 1
E
RH119 1/4 1 2-1/4 7/8

F
High Speed Steel - 3/8" Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
G
RH126 3/8 1-1/4 2-3/4 11/16

H
High Speed Steel - 1/2" Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
I
RH129 1/4 3/4 2-3/8 9/16
RH132 5/16 1-1/4 2-3/4 1/2
J
RH135 3/8 1-1/2 3 1/2
RH141 1/2 1-1/4 2-3/4 1/2
K RH144 1/2 2 4 1-1/16
RH147 5/8 1-1/4 2-3/4 1/2
RH149 3/4 1-1/4 2-3/4 5/8
RH153 7/8 1-1/2 3 1-1/4
RH156 1 1-1/4 2-3/4 1-1/4
RH159 1-1/4 1-1/4 2-3/4 1-5/16

288 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 1 Flute Straight & Spiral Panel Pilot Router Bits
Drill end point which allows you to plunge into material. A
Open cutting operations such as windows and doors.

C
High Speed Steel - 1/4" Straight Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
D
RH195 1/4 3/4 2-5/8 1

E
High Speed Steel - 3/8" Straight Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
F
RH198 3/8 7/8 3 1-1/8

G
High Speed Steel - 1/2" Straight Shank
Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
H
RH211 1/2 1 3-1/2 1-1/8

Drill end point which allows you to plunge into material. Open
cutting operations such as windows and doors. K

High Speed Steel - 1/4" Spiral Shank

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RH212 1/4 3/4 2-5/8 1-1/8

High Speed Steel - 3/8" Spiral Shank

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RH213 3/8 7/8 3-1/2 1-5/8

High Speed Steel - 1/2" Spiral Shank

Part No. Cutting Diameter Cut Edge Length Overall Length Shank Length
RH214 1/2 1-3/4 4-1/2 1-1/2

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 289
 A

Carbide Insert
Router Bits
www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 290
 Dedicated Insert Router Bits
Applications •• Requires no backing plates or clamping wedges. A
•• Designed for use on C.N.C. router machines. •• Insert is mechanically fastened by the use of face
•• Can also be used on stationary overhead routers. mounted screws.
B
•• Use with mechanical feed operations. •• Optional center router bit can be used to machine
•• CNC router must have excellent hold downs to the edges of the panel.
C
ensure the least possibility of part movement. •• Maximum RPM 12,000
•• To shape raised panels used in door applications. Advantages
•• Reduced set-up time because of fewer parts and a D
Technical Information
•• Shank style cutter body design uses 2 non- constant cutting circle.
turnable profiled carbide inserts. •• Extended tool life over brazed tooling due to insert E

•• Cutter body is profiled to match the carbide insert. accuracy and superior carbide grades.

F
Profile Cut Width Cutting Depth Shank Size Small Diameter Large Diameter Uses
Part No. mm in mm in in mm in mm in Insert No.
G
ND159 30 1.18" 46 1.81" 3/4" 22 .87" 112 4.41" 6735 / 6765
See page 297 for inserts.
H

Spare Parts
Part No. Description I

NP249 Torx Clamping Screw M4x6

NP123 Torx Clamping Screw M4x5.9 J
NP171 Torx Wrench “T” Handle T15
6778 Carbide Insert 20x12x2
K
6781 Carbide Insert 36x21x2i

Shank
Size
NU147 1.57" Max. Shank
Size
NU151
Material
.590"Max.
.5

To Be Cut

Profile
Zone .196" Min.

Profile Zone and Limitations for NU147

4.53" 4.53"

1.57" Max.
Single edge Single edge
1 Flute 1 Flute
Face Coming Material Face Coming
.590"Max.
.5

To Be Cut

Profile
.275" Max.
Zone .196" Min. .590" Max.

.90" Max. 1.57" Max.

1.06" Profile Zone and Limitations for NU151 1.85"

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 291
 Universal Insert Router Bits
A Applications •• Standard hook angle is 10° positive.
•• Designed for use on C.N.C. router machines. •• Comes complete with cutter body, wedges, screws
•• Can also be used on stationary overhead routers. and allen wrench.
B •• Use with mechanical feed operations. •• Insert router bit is manufactured in right-hand
•• CNC router must have excellent hold downs to rotation.
C
ensure the least possibility of part movement. •• Maximum RPM for 110mm Dia. = 12,000, 148mm
•• To produce profiles that have a large depth of cut. Dia. = 6,000
•• Use on edges of decorative panels, doors, Advantages
D furniture, etc. •• Cutterhead is able to produce numerous profiles
Technical Information by simply changing the insert.
•• Shank style cutter body design made of aluminum •• Extended tool life over brazed tooling due to insert
E
alloy is at a 45° angle and uses 2 non-turnable accuracy and superior carbide grades.
profiled carbide inserts. •• Produces a constant cutting circle so setup and
F •• Available in a 2-wing (flute) design only. machine adjustments are reduced to a minimum.
•• Requires the use of backing plates to support the •• Lower tooling costs due to decreased down time
profiled cutting region. required for tooling changes.
G

Max. Max. Profile Shank Cutting

H Cutting Width Cutting Depth Size Overall Length Circle Dia. Uses Backing
Part No. mm in. mm in. in. mm in. mm in. Insert No. Plate No.
NU135 40 1.57" 17 .67" 3/4" 123 4.84" 110 4.33" 6650 NB123
I
NU136 60 2.36" 22 .87" 3/4" 142 5.59" 148 5.83" 6660 NB122
NU137 40 1.57" 17 .67" 1" 123 4.84" 110 4.33" 6650 NB123
J NU141 60 2.36" 22 .87" 1" 142 5.59" 148 5.83" 6660 NB122
See page 297 for inserts.

K
Spare Parts
Part No. Description
NP111 Clamping Wedge for 40mm Inserts
NP114 Clamping Wedge for 60mm Inserts
NP117 Wedge Screw M8x12 for ll Cutters
NP119 Allen Wrench SW4 for Screws
NB122 60mm x 41mm Backing Plate
NB123 40mm x 36mm Backing Plate
Shank
Size

Profile
Zone

Profile
Zone
Body Dia.
Overall
Length
45
o

45
o 60mm
40mm

45 o
id g
W ttin
th
u
C

Minimum Dia.
Large Dia.

292 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Universal Insert Router Bits
Applications •• Comes complete with cutter body, wedges, screws A
•• Designed for use on C.N.C. router machines. and allen wrench.
•• Can also be used on stationary overhead routers. •• Insert router bit is manufactured in right-hand
rotation. B
•• Use with mechanical feed operations.
•• CNC router must have excellent hold downs to •• Maximum RPM for 3/4" Shank = 10,000, 1" Shank
ensure the least possibility of part movement. = 12,000
C
•• To profile edges on decorative panels, doors, Advantages
frames, etc. •• Cutterhead is able to produce numerous profiles
Technical Information by simply changing the insert. D
•• Shank style cutter body design uses 2 non- •• Extended tool life over brazed tooling due to insert
turnable profiled carbide inserts. accuracy and superior carbide grades.
E
•• Available in a 2-wing (flute) design only. •• Produces a constant cutting circle so setup and
•• Requires the use of backing plates to support the machine adjustments are reduced to a minimum.
profiled cutting region. •• Lower tooling costs due to decreased down time F
•• Standard hook angle is 10° positive. required for tooling changes.

G
Max. Max. Profile Shank Cutting
Cutting Width Cutting Depth Size Overall Length Circle Dia. Uses Backing
Part No. mm in. mm in. in. mm in. mm in. Insert No. Plate No. H
NU111 35 1.38" 17 .67" 3/4" 109 4.29" 90 3.54" 6650 NB123
NU114 55 2.17" 22 .87" 3/4" 129 5.08" 100 3.94" 6660 NB122 I
NU117 35 1.38" 17 .67" 1" 109 4.29" 90 3.54" 6650 NB123
NU119 55 2.17" 22 .87" 1" 129 5.08" 100 3.94" 6660 NB122
J
See page 297 for inserts.

Spare Parts K
Part No. Description
NP111 Clamping Wedge for 40mm Inserts
NP114 Clamping Wedge for 60mm Inserts
NP117 Wedge Screw M8x12 for all Cutters
NP119 Allen Wrench SW4 for Screws
NB122 60mm x 41mm Backing Plate
NB123 40mm x 36mm Backing Plate

Shank Size

Profile
Overall Length

Zone
2.166" Body Diameter

Maximum
Profile
Depth

Profile 1.38"
Zone
Insert Height 40/60mm

61o

.87" .67"
Cutting Circle
60mm Insert 40mm Insert Face Coming

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 293
 Universal Insert Router Bits
A Applications •• Comes complete with cutter body, wedges, screws
•• Designed for use on C.N.C. router machines. and allen wrench.
•• Can also be used on stationary overhead routers. •• Insert router bit is manufactured in right-hand
B
•• Use with mechanical feed operations. rotation.

•• CNC router must have excellent hold downs to •• Maximum RPM for 3/4" Shank = 10,000, 1" Shank
C
ensure the least possibility of part movement. = 12,000

•• To profile edges on decorative panels, doors, Advantages

D frames, etc. •• Cutter head is able to produce numerous profiles
by simply changing the insert.
Technical Information
•• Extended tool life over brazed tooling due to insert
E
•• Shank style cutter body design uses 2 non- accuracy and superior carbide grades.
turnable profiled carbide inserts.
•• Produces a constant cutting circle so setup and
•• Available in a 2-wing (flute) design only. machine adjustments are reduced to a minimum.
F
•• Requires the use of backing plates to support the •• Lower tooling costs due to decreased down time
profiled cutting region. required for tooling changes.
G •• Standard hook angle is 10° positive.

Max. Max. Profile Shank Cutting

H Cutting Width Cutting Depth Size Overall Length Circle Dia. Uses Backing
Part No. mm in. mm in. in. mm in. mm in. Insert No. Plate No.
NU123 30 1.18" 17 .67" 3/4" 109 4.29" 90 3.54" 6650 NB123
I
NU126 50 1.97" 22 .87" 3/4" 129 5.08" 100 3.94" 6660 NB122
NU129 30 1.18" 17 .67" 1" 109 4.29" 90 3.54" 6650 NB123
J
NU132 50 1.97" 22 .87" 1" 129 5.08" 100 3.94" 6660 NB122
See page 297 for inserts.

K
Spare Parts
Part No. Description
NP111 Clamping Wedge for 40mm Inserts
NP114 Clamping Wedge for 60mm Inserts
NP117 Wedge Screw M8x12 for all Cutters
NP119 Allen Wrench SW4 for Screws
NB122 60mm x 41mm Backing Plate
NB123 40mm x 36mm Backing Plate

Shank Size
Overall Height

Profile 1.97"
Zone Body Diameter

Maximum
Profile Profile
1.18" Depth
Zone
Insert Height 40/60mm

.87"
.67"
Cutting Circle
60mm Insert 40mm Insert Face Coming

294 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Universal Insert Router Bits
Applications Technical Information A
•• Designed for use on C.N.C. router machines. •• Shank style cutter body design made from high
•• Can also be used on stationary overhead routers. tensile steel and tempered for long life and wear
•• Use with mechanical and hand feed operations. resistance. B

•• CNC router must have excellent hold downs to •• Small indexable standard carbide insert is easily
ensure the least possibility of part movement. removed with the use of the wrench provided.
C
•• Use for machining operations such as grooving, •• 1 cutting edge utilized/profiled per insert.
lettering and engraving in both natural and man- •• Accuracy maintained even when changing the
made material. insert. D
•• Insert can be profiled on one cutting edge only to •• Maximum RPM 24,000
provide small decorative cuts. Advantages
E
•• Extended tool life over brazed tooling due to insert
accuracy and superior carbide grades.
•• Reduced sharpening costs due to small cost of F
inserts

Cutting Edge Cutting Edge No. of Uses G

Diameter Length Shank Size Overall Length Inserts Insert
Part No. in. mm in. mm in. in. No. of Flutes Required No.
ND259 .69" 8.5 .34" 1/2" 48 1.89" 1 1 TJ156N H
See page 297 for inserts.

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 295
 Universal Insert Router Bits
A Applications •• Standard hook angle is 10° positive.
•• Designed for use on C.N.C. router machines. •• Comes complete with cutter body, wedges, screws
•• Can also be used on stationary overhead routers. and allen wrench.
B •• Insert router bit is manufactured in right-hand
•• Use with mechanical feed operations.
rotation.
•• CNC router must have excellent hold downs to •• Maximum RPM for 3/4" Shank = 10,000, 1" Shank
C ensure the least possibility of part movement. = 12,000
•• To profile wide profiles and grooves, some rosettes Advantages
D that do not have a center button. •• Cutterhead is able to produce numerous profiles
•• Can also be used to cut raised panel sections and by simply changing the inserts and backing plates.
deep flat profiles. •• Extended tool life over brazed tooling due to insert
E
Technical Information accuracy and superior carbide grades.
•• Shank style cutter body design uses 2 non- •• Produces a constant cutting circle so setup and
F turnable profiled carbide inserts. machine adjustments are reduced to a minimum.
•• Available in a 2-wing (flute) design only. •• Lower tooling costs due to decreased down time
•• Requires the use of backing plates to support the
required for tooling changes.
G
profiled cutting region.

H Max. Max. Profile Shank

U.S. Cutting Width Cutting Depth Size Overall Length Cutting Circle Dia.
Uses Backing
Part No. mm in. mm in. In. mm in. mm in. Insert No. Plate No.
I NU138 76 2.99" 17 .67" 3/4" 112 4.41" 38 1.5" 6771/6774 NB123
NU144 76 2.99" 17 .67" 1" 112 4.41" 38 1.5" 6771/6774 NB123
J See "Universal Inserts" on page 297 for inserts.

Spare Parts
K
Part No. Description
NP111 Clamping Wedge for 40mm inserts
NP117 Wedge Screw M8 x 12 for all Cutters
NP119 Allen Wrench SW4 for Screws
NP123 40mm x 36mm Backing Plate

1"

4.41"

1.42"
.67"

2.99"

Profile .67"
Zone

2.99"

296 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Universal Inserts
4 A

20 Profile Zone .822"

Profile Zone
B
41
12 2
4.5
C
20 30
Dim. Carbide Sold .5
Part No. WxHxT Grade in Quantities 6
D
6778 20x12x1.5 GP Ea. 5 50
60 2

E
Dim. Carbide Sold
Part No. WxHxT Grade in Quantities
6660 60x42x2 GP Ea. F

4.6
G
36

Profile Zone H

36
21
I
2 4.5

20

Dim. Carbide Sold

Part No. WxHxT Grade in Quantities J
6.3

6781 36x21x2 GP Ea. 40 2

K
Dim. Carbide Sold
Part No. WxHxT Grade in Quantities
6771 40x36x2 GP Ea.
Profile Zone .625" 6774 40x36x2 GP Ea.

36.3

4.5
20

.5
6

5 30
40 2

Dim. Carbide Sold Dim. Carbide Sold

Part No. WxHxT Grade in Quantities Part No. WxHxT Grade in Quantities
6650 40x36.3x2 GP Ea. TJ156 12x12x1.5 GP 10

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 297
 Dedicated Insert Router Bits
A Applications •• Requires no backing plates or clamping wedges.
•• Designed for use on C.N.C. router machines. •• Insert is mechanically fastened by the use of face
•• Can also be used on stationary overhead routers. mounted screws.
B •• Use with mechanical feed operations. •• Optional center router bit can be used to machine
•• CNC router must have excellent hold downs to the edges of the panel.
C
ensure the least possibility of part movement. •• Maximum RPM 12,000
•• To shape raised panels used in door applications. Advantages
Technical Information •• Reduced set-up time because of fewer parts and a
D •• Shank style cutter body design uses 2 constant cutting circle.
non-turnable profiled carbide inserts. •• Extended tool life over brazed tooling due to insert
•• Cutter body is profiled to match the carbide insert. accuracy and superior carbide grades.
E

Shank
F
Profile Cut Width Cutting Depth Size Small Diameter Large Diameter Uses
Part No. mm in mm in in mm in mm in Insert No.
G ND159 30 1.18" 46 1.81" 3/4" 22 .87" 112 4.41" 6735 / 6765

Dedicated inserts begin on page 308.

H
Spare Parts
I Part No. Description
NP123 Torx Screw M4x5.9 large head T15

J NP126 Torx Wrench T15

Shank Size

K Spare Parts for Optional Center Cutter

Part No. Description
Overall Length

ND162 Optional Center Cutter .87" Dia.x47" Face

Insert Height 1.18"

Coming

NP129 Screw M4x25 for RB #NP162

TJ156 Std. Insert 12x12x1.5mmYourProfile
Raised Panel
Here

Shank Size

Profile Depth
Insert Depth 1.97"
Large Diameter 4.41"

Overall Length 6mm

Optional Center Cutter

Face to Remove Edge of Panel
Insert Height 1.18"

Coming Part Number ND162

2.125"
Your Raised Panel
Profile Here

.47"

.87"

Profile Depth
Insert Depth 1.97"
Large Diameter 4.41"

6mm

Optional Center Cutter

298
to Remove Edge of Panel
12 North American Offices Jasper, Indiana
Part Number ND162 Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
2.125"
 Dedicated Insert Router Bits
Applications •• Requires no backing plates or clamping wedges. A
•• Designed for use on C.N.C. router machines. •• Insert is mechanically fastened by the use of face
•• Can also be used on stationary overhead routers. mounted screws.
•• Use with mechanical feed operations. •• Insert router bit is manufactured in right-hand B

•• CNC router must have excellent hold downs to rotation.

ensure the least possibility of part movement. •• Maximum RPM for 45mm dia. = 18,000, 55/65mm C
•• To profile edges on decorative panels, doors, dia. = 12,000
frames, etc. Advantages
Technical Information •• Reduced set-up time because of fewer parts and a D
•• Shank style cutter body design uses non-turnable constant cutting circle.
profiled carbide inserts. •• Extended tool life over brazed tooling due to insert
E
•• Cutter body is profiled to match the carbide insert.

Shank Size and F

Max. Cutting Width Dimensions Max. Large Diameter Body Diameter Uses Insert
Part No. mm in. Dia. Length mm in. mm in. No.
G
ND111 30 1.18" 1/2" 1.57" 45 1.77" 42 1.65" 6711 / 6741
ND114 30 1.18" 3/4" 2.17" 45 1.77" 42 1.65" 6711 / 6741
ND114 30 1.18" 3/4" 2.17" 55 2.17" 52 2.05" 6714 / 6744 H
ND114 30 1.18" 3/4" 2.17" 65 2.56" 52 2.05" 6717 / 6747
ND117 40 1.57" 1/2" 1.57" 45 1.77" 42 1.65" 6719 / 6749 I
ND119 40 1.57" 3/4" 2.17" 45 1.77" 42 1.65" 6719 / 6749
ND119 40 1.57" 3/4" 2.17" 55 2.17" 52 2.05" 6723 / 6753
J
ND119 40 1.57" 3/4" 2.17" 65 2.56" 52 2.05" 6726 / 6756
ND123 50 1.97" 1/2" 1.57" 45 1.77" 42 1.65" 6729 / 6759
ND126 50 1.97" 3/4" 2.17" 45 1.77" 42 1.65" 6729 / 6759 K

ND126 50 1.97" 3/4" 2.17" 55 2.17" 52 2.05" 6732 / 6762

ND126 50 1.97" 3/4" 2.17" 65 2.56" 52 2.05" 6735 / 6765

Dedicated inserts begin on page 308.

Spare Parts
Part No. Description
NP123 Torx Screw M4x5.9 large head T15
NP126 Torx Wrench T15
Shank Size

Face Coming
Overall Length

Body Dia.
Cutting Width

Min. Small Dia.

All Bits 1.18"
Profile Depth
Max. Large Dia.

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 299
 Dedicated Insert Router Bits
A Applications •• Insert is mechanically fastened by the use of back
•• Designed for use on C.N.C. router machines. mounted screws.
•• Can also be used on stationary overhead routers. •• Mèche à plaquette fabriquée pour une rotation
B •• Use with mechanical feed operations. vers la droite.
•• CNC router must have excellent hold downs to •• Maximum RPM for 34mm dia. = 18,000, 44/54mm
ensure the least possibility of part movement. dia. = 12,000
C
•• To profile edges on decorative panels, doors, •• Ramp plunging is possible with this tool.
frames, etc. Advantages
D Technical Information •• Reduced set-up time because of fewer parts and a
•• Shank style cutter body design uses non-turnable constant cutting circle.
profiled carbide inserts. •• Extended tool life over brazed tooling due to insert
E
•• Cutter body is profiled to match the carbide insert. accuracy and superior carbide grades.
•• Requires no backing plates or clamping wedges.
F

Max. Cutting Max. Profile Shank Min. Small Max. Large

G Width Cutting Depth Size Diameter Diameter Body Diameter Uses
Part No. mm in. mm in Inches mm in. mm in. mm in. Insert No.
ND129 30 1.18" 7 .28" 1/2" 19 .75" 34 1.34" 28 1.10" 6711/6741
H
ND132 30 1.18" 7 .28" 3/4" 19 .75" 34 1.34" 28 1.10" 6711/6741

Dedicated inserts begin on page 308.

I

Spare Parts
J
Part No. Description
NP123 Torx Screw M4x5.9 large head T15
K NP126 Torx Wrench T15

Shank Size

Body Dia.

Face Coming
40mm Cutting
Width Only

Back Mounted
Screws

Your Dedicated
Profile Here

Min. Small Dia. .75" Cutting Depth

Large Dia.

300 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Dedicated Insert Router Bits
Applications •• Insert is mechanically fastened by the use of 3 A
•• Designed for use on C.N.C. router machines. back mounted screws for additional protection.
•• Can also be used on stationary overhead routers. •• Insert router bit is manufactured in right-hand
•• Use with mechanical feed operations. rotation. B

•• CNC router must have excellent hold downs to •• Maximum RPM for 34mm dia. = 18,000, 44/54mm
ensure the least possibility of part movement. dia. = 12,000
C
•• To profile edges on decorative panels, doors, •• Ramp plunging is possible with this tool.
frames, etc. Advantages
Technical Information •• Reduced set-up time because of fewer parts and a D
•• Shank style cutter body design uses non-turnable constant cutting circle.
profiled carbide inserts. •• Extended tool life over brazed tooling due to insert
E
•• Cutter body is profiled to match the carbide insert. accuracy and superior carbide grades.
•• Requires no backing plates or clamping wedges.
F

Max. Cutting Max. Profile Shank Min. Small Max. Large

Width Cutting Depth Size Diameter Diameter Body Diameter Uses G
Part No. mm in. mm in Inches mm in. mm in. mm in. Insert No.
ND135 40 1.58" 17 .67" 1/2" 19 .75" 54 2.13" 41 1.61" 6728/6758
ND138 40 1.58" 17 .67" 3/4" 19 .75" 54 2.13" 41 1.61" 6728/6758 H
Dedicated inserts begin on page 308.

I
Spare Parts
Part No. Description J
NP123 Torx Screw M4x5.9 large head T15
NP126 Torx Wrench T15
K

Shank Size

30

Body Dia.

Face Coming

26 40
40mm Cutting
Width Only

Back Mounted
Screws

Your Dedicated
Profile Here

Min. Small Dia. .75" Cutting Depth

Large Dia.
17

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 301
 Dedicated Insert Router Bits
A Applications •• Requires no backing plates or clamping wedges.
•• Designed for use on C.N.C. router machines. •• Insert is mechanically fastened by the use of back
•• Can also be used on stationary overhead routers. mounted screws.
B •• Use with mechanical feed operations. •• Insert router bit is manufactured in right-hand
•• CNC router must have excellent hold downs to rotation.
ensure the least possibility of part movement. •• Maximum RPM 18,000
C
•• To profile edges on decorative panels, doors, •• Ramp plunging is possible with this tool.
frames, etc. Advantages
D Technical Information •• Reduced set-up time because of fewer parts and a
•• Shank style cutter body design uses non-turnable constant cutting circle.
profiled carbide inserts. •• Extended tool life over brazed tooling due to insert
E
•• Cutter body is profiled to match the carbide insert. accuracy and superior carbide grades.

F
Max. Max. Profile Shank Min. Small Max. Large Uses
Cutting Width Cutting Depth Size Diameter Diameter Body Diameter Insert
G Part No. mm in. mm in Inches mm in. mm in. mm in. No.
ND141 25 .98" See Drawing 1/2" 10 .39" 30 1.18" 28 1.10" 6738
ND144 25 .98" See Drawing 3/4" 10 .39" 30 1.18" 28 1.10" 6738
H
Dedicated inserts begin on page 308.

I
Spare Parts
Part No. Description
J
NP123 Torx Screw M4x5.9 large head T15
NP126 Torx Wrench T15
K

Shank Size
17.5

6.5
Body Dia. 1.10"

25 Your Dedicated
Profile Here
Face
Coming

6.5 Cutting Width

.984"

Profile Depth Min. Small Dia. .394"

Max. Large Dia.
1.18"

302 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Dedicated Insert Router Bits
Applications •• Requires no backing plates or clamping wedges. A
•• Designed for use on C.N.C. router machines. •• Insert is mechanically fastened by the use of back
•• Can also be used on stationary overhead routers. mounted screws.
•• Use with mechanical feed operations. •• Insert router bit is manufactured in right-hand B

•• CNC router must have excellent hold downs to rotation.

ensure the least possibility of part movement. •• Maximum RPM 12,000 C
•• To profile edges on decorative panels, doors, Advantages
frames, etc. •• Reduced set-up time because of fewer parts
Technical Information and a constant cutting circle. D
•• Shank style cutter body design uses non-turnable •• Extended tool life over brazed tooling due to insert
profiled carbide inserts. accuracy and superior carbide grades.
E
•• Cutter body is profiled to match the carbide insert.

Max. Max. Profile Shank Min. Max. Body F

Cutting Width Cutting Depth Size Small Diameter Large Diameter Diameter Uses
Part No. mm in. mm in Inches mm in. mm in. mm in. Insert No.
ND147 30 1.18" See Drawing 1/2" 19 .75" 64 2.52" 58 2.28" 6714/6744 G
ND149 30 1.18" See Drawing 3/4" 19 .75" 64 2.52" 58 2.28" 6714/6744
Dedicated inserts begin on page 308.
H

Spare Parts I
Part No. Description
NP123 Torx Screw M4x5.9 large head T15
J
NP126 Torx Wrench T15

K
Shank Size

25o 25
25¼

Body Dia.
2.28"
Face
Profile Depth Coming

30 Your Profile
Here Cutting Width
1.18"

Base Min. Small Dia. .75"

Reference Line
13 Max. Large Dia.
2.52"

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 303
 Dedicated Insert Router Bits
A Applications •• Requires no backing plates or clamping wedges.
•• Designed for use on C.N.C. router machines. •• Insert is mechanically fastened by the use of back
•• Can also be used on stationary overhead routers. mounted screws.
B •• Use with mechanical feed operations. •• Insert router bit is manufactured in right-hand
•• CNC router must have excellent hold downs to rotation.
ensure the least possibility of part movement. •• Maximum RPM 12,000
C
•• To profile edges on decorative panels, doors, Advantages
frames, etc. •• Reduced set-up time because of fewer parts and a
D Technical Information constant cutting circle.
•• Shank style cutter body design uses non-turnable •• Extended tool life over brazed tooling due to insert
profiled carbide inserts. accuracy and superior carbide grades.
E
•• Cutter body is profiled to match the carbide insert.

F Max. Max. Profile Shank

Cutting Width Cutting Depth Size Max. Large Diameter Body Diameter Uses
Part No. mm in. mm in. in. mm in. mm in. Insert No.
G ND153 40 1.57" See Drawing 3/4" 74 2.91" 70 2.76" 6723 / 6753
ND153 40 1.57" See Drawing 3/4" 83 3.27" 70 2.76" 6726 / 6756
H Dedicated inserts begin on page 308.

I Spare Parts
Part No. Description
J NP123 Torx Screw M4x5.9 large head T15
NP126 Torx Wrench T15

30 o 30o
25
30

Shank Size

40
40
Body Dia. 2.76"

Base 30 o
12 Reference Line
Base

17
ReferenceYour
LineProfile Profile Depth
Here

Face
Coming

Ins
ert Cut Width 1.57"
Ins #12
ert
#1
3

Large Dia 2.96"

Large Dia 3.27"

304 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Dedicated Insert Router Bits
Applications •• Insert is mechanically fastened by the use of back A
•• Designed for use on C.N.C. router machines. mounted screws.
•• Can also be used on stationary overhead routers. •• Insert router bit is manufactured in right-hand
•• Use with mechanical feed operations. rotation with a combination up-shear/down-shear B

•• CNC router must have excellent hold downs to configuration which eliminates tearout on larger
ensure the least possibility of part movement. profiles.
C
•• To profile edges on decorative panels, doors, •• Maximum RPM 12,000
frames, etc. Advantages
Technical Information •• Reduced set-up time because of fewer parts and a D
•• Shank style cutter body design of high alloy steel constant cutting circle.
uses 2+2 non-turnable profiled carbide inserts. •• Extended tool life over brazed tooling due to insert
accuracy and superior carbide grades. E
•• Cutter body is profiled to match the carbide insert.
•• Requires no backing plates or clamping wedges.
F
Max. Max. Profile Shank Max.
Cutting Width Cutting Depth Size Large Diameter Body Diameter
Part No. mm in. mm in. in. mm in. mm in. Uses Insert No. G
ND156 55 2.17" See Drawing 3/4" 86 3.39" 75 2.95" 6717 / 6747
Dedicated inserts begin on page 308.
H

Spare Parts I
Part No. Description
NP123 Torx Screw M4x5.9 large head T15
J
NP126 Torx Wrench T15

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 305
 Dedicated Insert Router Bits
A Applications •• Swivel range from top 0°-45°, bottom 0°-90°.
•• Designed for use on C.N.C. router machines. •• Small indexable standard carbide inserts are easily
•• Can also be used on stationary overhead routers. removed with the use of the wrench provided
B •• Use with mechanical and hand feed operations. •• 2 inserts on the cutting edge.
•• CNC router must have excellent hold downs to •• Accuracy maintained even when changing the
C
ensure the least possibility of part movement. inserts.
•• Use for machining operations such as jointing, •• Maximum RPM 9,400 - 12,000
rabbeting, beveling and chamfering in both natural Advantages
D and man-made material. •• Extended tool life over brazed tooling due to insert
Technical Information accuracy and superior carbide grades.
•• Shank style cutter body design made from high •• Reduced sharpening costs due to small cost of
E
tensile steel and tempered for long life and wear inserts over standard brazed router bits.
resistance.
F
Cutting Edge Cutting Edge Shank Overall
Diameter Length Size Length No. of No. of Inserts Uses
G
Part No. in. mm in. In. mm Flutes Required Insert No.
ND237 4.02" mx 40 1.57" 3/4" 92 2 2 TJ123
Dedicated inserts begin on page 308.
H

Spare Parts
I
Part No. Description
NP244 Clamping Screw M5x16 Din 912
J
Allen Screw M6x8
TJ123 40x12x1.5 Page TCI1-1
K NP119 Wrench “T” handle SW4
NP197 Wrench “T” handle SW3
NP132 Allen Wrench SW3

306 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Dedicated Insert Router Bits
Applications •• Small indexable standard carbide inserts are easily A
•• Designed for use on C.N.C. router machines. removed with the use of the wrench provided
•• Use with mechanical and hand feed operations. •• 1 insert with 2 cutting edges.
•• CNC router must have excellent hold downs to •• Accuracy maintained even when changing the B
ensure the least possibility of part movement. inserts.
•• Use for machining operations such as beveling, •• Maximum RPM 12,000 C
decorative grooving, and miter folding. Advantages
Technical Information •• Extended tool life over brazed tooling due to insert
•• Shank style cutter body design made from high accuracy and superior carbide grades. D
tensile steel and tempered for long life and wear •• Reduced sharpening costs due to small cost of
resistance. inserts over standard brazed router bits.
E

Cutting Edge Shank

Diameter Cutting Edge Length Size Overall Length No. of No. of Inserts Uses F
Part No. in. mm in. In. mm in. Flutes Required Insert No.
ND154 1.97" 25 .98" 3/4" 93 3.66" 1 1 TJ125
G
Dedicated inserts begin on page 308.

Shank
Size
I

90o J
45o

K
Overall Length

V-Grooving Chamfering
Cutting Width

45o
90 o

V-Folding
Beveling
45
o

Body Diameter

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 307
 Dedicated Inserts
A

6.5
25
B 4

Profile Zone

Profile Zone
C 6.5 2
26 50
17.5

Dim. Carbide Sold in

D Part No. WxHxT Grade Quantities
6738 17.5x25x2 GP Ea.
4
E
7 2

20

F
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
Profile Zone

G 14 30 6729 20x50x2 GP Ea.

6759 20x50x2 NW Ea.

H 4

7 2
20

I
U.S. Dim. Carbide Sold in
art No. WxHxT Grade Quantities
J 6711 20x30x2 GP Ea.
14 Profile Zone 30
6741 20x30x2 NW Ea.

K
4

12 2
25

Dim. Carbide Sold in

Part No. WxHxT Grade Quantities
6714 25x30x2 GP Ea.
Profile Zone

6744 25x30x2 NW Ea.

26 40

7 2
20

Dim. Carbide Sold in

Part No. WxHxT Grade Quantities
6719 20x40x2 GP Ea.
6749 20x40x2 NW Ea.

308 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Dedicated Inserts
A

Profile Zone
B

Profile Zone
26 40

26 50

4
D
12 2
25 4

Dim. Carbide Sold in 17 2 E

Part No. WxHxT Grade Quantities 30

6723 40x25x2 GP Ea.

Dim. Carbide Sold in F
6753 40x25x2 NW Ea. Part No. WxHxT Grade Quantities
6735 50x30x2 GP Ea.
G
6765 50x30x2 NW Ea.

I
Profile Zone

Profile Zone
26 50
14 30

K
4

4 17 2
30

12 2

25
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities 6717 30x30x2 GP Ea.

6732 50x25x2 GP Ea. 6747 30x30x2 NW Ea.

6762 50x25x2 NW Ea.

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 309
 Dedicated Inserts
A

B
26 Profile Zone 40

4
D
17 2
Dim. Carbide Sold in
30
Part No. WxHxT Grade Quantities
E TJ123 40x12x1.5 GP 10
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
F 6726 40x30x2 GP Ea.
6756 40x30x2 NW Ea.

H
12.6
1.5

Dim. Carbide Sold in

J Part No. WxHxT Grade Quantities
Profile Zone

26 40
TJ125 40x12x1.5 GP 10

17 2

30

Dim. Carbide Sold in

Part No. WxHxT Grade Quantities
6728 40x30x2 GP Ea.
6758 40x30x2 NW Ea. Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
TJ156Q 12x12x1.5 GP 10

310 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Standard Insert Router Bits
Applications •• Use a double flute for smoother finishes and high A
•• Designed for use on C.N.C. router machines. quality cuts.
•• Can also be used on stationary overhead routers. •• Indexable standard carbide inserts are easily
•• Use with mechanical and hand feed operations. removed with the use of the torx wrench provided. B

•• CNC router must have excellent hold downs to •• Requires no special set-up fixtures to set knives.
ensure the least possibility of part movement. •• Maximum RPM 24,000 C
•• Use for jointing, coping, parting, rabbeting, ramp Advantages
plunge, vertical ramp plunging, boring, cutout •• Extended tool life over brazed tooling due to insert
routing etc. accuracy and superior carbide grades. D
Technical Information •• Excellent for high production runs.
•• Shank style cutter body design made from high •• Reduced sharpening costs due to small cost of E
tensile steel for long life and durability. inserts over standard brazed router bits.
•• Use a single flute for higher feed rates and faster
material removal. F

Cutting Edge Cutting Edge G

Diameter Length Shank Size Overall Length No. of Inserts Uses
Part No. in. mm in. In. mm in. No. of Flutes Required Insert No.
ND189 1/2" 30 1.18" 1/2" 80 3.15" 1 1 TJ235 H
ND192 3/4" 50.5 1.99" 3/4" 110 4.33" 1 2 TJ241/TJ156

ND193 3/4" 50.5 1.99" 1/2" 110 4.33" 1 2 TJ241/TJ156 I

ND195 3/4" 56 2.20" 1/2" 110 4.33" 2 2 TJ129
Standard inserts begin on page 321.
J
Shank
Size
Shank Shank
Size
Size

K
Overall Length

Overall Length

Overall Length
Cutting Edge Length
Cutting Edge Length

Cutting Edge Length

50mm Insert

Cutting Cutting
Dia. Dia. Cutting Dia.

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 311
 Standard Insert Router Bits
A Spare Parts for ND189
Part No. Description
B NP215 Torx Screw M3x7.0 T8
NP176 Clamping Wedge 30mm RH

C
Spare Parts for ND195
D Part No. Description
NP123 Torx Screw M4x5.9 T15
NP171 Torx Wrench T15
E

F
Spare Parts for ND192 & ND193
Part No. Description
NP123 Torx Screw M4x5.9 T15 (for plunge point)
G
NP258 Clamp Screw for Wedge M3.5x5.5 T15
NP171 Torx Wrench T15
H
NP224 Clamping Wedge for ND192 RH

312 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Standard Insert Router Bits
Applications •• Top and bottom inserts have down and up shear A
•• Designed for use on C.N.C. router machines. to eliminate tearout on material surfaces.
•• Can also be used on stationary overhead routers. •• Can be used for plunge cutting.
•• Use with mechanical and hand feed operations. •• Designed for high removal rates in either natural B

•• CNC router must have excellent hold downs to or man-made material. Excellent for double face
ensure the least possibility of part movement. laminates.
C
•• Use for jointing, coping, parting, rabbeting, ramp •• Requires no special set-up fixtures to set knives.
plunge, vertical ramp plunging, boring, cutout •• Maximum RPM 18,000
routing etc. Advantages D
Technical Information •• Extended tool life over brazed tooling due to insert
•• Shank style cutter body design made from high accuracy and superior carbide grades.
E
tensile steel for long life and durability. •• Excellent for high production runs.
•• Uses standard turnover inserts to reduce cutting •• Reduced sharpening costs due to small cost of
pressures. inserts over standard brazed router bits. F

Cutting Edge Cutting Edge G

Diameter Length Shank Size Overall Length No. of Inserts Uses
Part No. mm in. mm in. In. mm in. No. of Flutes Required Insert No.
ND221 22 .866" 42 1.65" 3/4" 115 4.53" 1+1 4 TJ156 H

ND224 22 .866" 60 2.36" 3/4" 131 5.16" 1+1 6 TJ156

Standard inserts begin on page 321. I

Spare Parts J

Part No. Description

NP123 Torx Screw M4 Extra Large Head T15 K
NP171 Torx Wrench T15

Shank
Size
Overall Length

Cutting Edge Length

Cutting Dia.

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 313
 Standard Insert Router Bits
A Applications •• Small indexable standard carbide inserts are easily
•• Designed for use on C.N.C. router machines. removed with the use of the wrench provided.
•• Can also be used on stationary overhead routers. •• Requires no special set-up fixtures to set knives.
B •• Use with mechanical and hand feed operations. •• Maximum RPM 18,000
•• CNC router must have excellent hold downs to Advantages
C
ensure the least possibility of part movement. •• Extended tool life over brazed tooling due to insert
•• Use for machining double laminated material accuracy and superior carbide grades.
where chipping and “lifting” of presents a problem •• Excellent for high production runs.
D with straight style router bits. •• Reduced sharpening costs due to small cost of
Technical Information inserts over standard brazed router bits.
•• Shank style cutter body design made from high
E
tensile steel for long life and durability.

Cutting Edge Cutting Edge

Diameter Length Shank Size Overall Length
G No. of Inserts Uses
Part No. in. mm in. In. mm in. No. of Flutes Required Insert No.
ND198 3/4" 30 1.18" 3/4" 95 3.74" 1 2 TJ389
H
ND197LH 3/4" 30 1.18" 3/4" 95 3.74" 1 2 TJ389
Standard inserts begin on page 321.

Spare Parts
J Part No. Description
NP123 Torx Screw M4 Extra Large Head T15

K NP126 Torx Wrench T15

TJ389 Standard Turnover insert 16x7x1.5

Shank
Size
Overall Length

Cutting Edge Length

Combination
Up and Down
Shear

314 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Standard Insert Router Bits
Applications •• Indexable standard carbide inserts are easily A
•• Designed for use on C.N.C. router machines. removed with the use of the torx wrench
•• Can also be used on stationary overhead routers. provided.
•• Use with mechanical and hand feed operations. •• 2 inserts on the top and 2 inserts on the bottom. B

•• CNC router must have excellent hold downs to •• Combination up/down shear eliminate chipping
ensure the least possibility of part movement. and lifting of the laminated material.
C
•• Use for machining operations on double faced •• Maximum RPM 18,000
laminates, plastics and paper coated material. Advantages
Technical Information •• Extended tool life over brazed tooling due to insert D
•• Shank style cutter body design made from high accuracy and superior carbide grades.
tensile steel and tempered for long life and wear •• Excellent for high production runs.
E
resistance. •• Reduced sharpening costs due to small cost of
inserts over standard brazed router bits.
F

Cutting Edge Cutting Edge

Diameter Length Shank Size Overall Length
No. of Inserts Uses G
Part No. in. mm in. In. mm in. No. of Flutes Required Insert No.
ND244 .787" 50 1.97" 1/2" 125 4.92" 2+2 4 TJ381
Standard inserts begin on page 321. H

Spare Parts I

3/4" Shank
Part No. Description
NP231 Clamping Screw M3x4.4 T9 J

NP159 Torx Wrench “T” Handle T9

TJ381 Standard Insert 28x7x1.5 K

4.921"
3/4" Shank

1.968"

28x7

.787"

4.921"

Downshear
1.968"

28x7

Upshear
.787"

Downshear

315
Upshear
www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer.
 Standard Insert Router Bits
A Applications •• Indexable standard carbide inserts are easily
•• Designed for use on C.N.C. router machines. removed with the use of the torx wrench
•• Can also be used on stationary overhead routers. provided.
B
•• Use with mechanical and hand feed operations. •• Requires no special set-up fixtures to set knives.
•• CNC router must have excellent hold downs to •• Maximum RPM 18,000
C ensure the least possibility of part movement. Advantages
•• Use for machining operations such as jointing, •• Extended tool life over brazed tooling due to insert
rabbeting, contour cutting, cut-outs in both natural accuracy and superior carbide grades.
D and man-made material. •• Excellent for high production runs.
Technical Information •• Reduced sharpening costs due to small cost of
•• Shank style cutter body design made from high inserts over standard brazed router bits.
E
tensile steel for long life and durability.

F Cutting Edge Overall Uses

Diameter Cutting Edge Length Shank Size Length No. of No. of Inserts Insert
Part No. in. mm in. In. mm in. Flutes Required No.
G ND227 20 28+28 1.10+1.10" 3/4" 130 5.12" 2+2 4 TJ381
Standard inserts begin on page 321.

H
Spare Parts
I Part No. Description
NP231 Clamping Screw M3x4.4 T9

J NP159 Torx Wrench "T" Handle T9

TJ381 Standard Insert 28x7x1.5

R
Overall Length

Top Laminate
Veneer Or Paper
R.H Cutting Edge Length

1.338"
L
L.H. Cutting Edge Length

Cutting Dia.

316 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Standard Insert Router Bits
Applications •• 1 Plunge point center insert. A
•• Designed for use on C.N.C. router machines. •• Small indexable standard carbide inserts are easily
•• Can also be used on stationary overhead routers. removed with the use of the wrench provided.
B
•• Use with mechanical and hand feed operations. •• Requires no special set-up fixtures to set knives.
•• CNC router must have excellent hold downs to •• Maximum RPM 18,000
ensure the least possibility of part movement. Advantages C
•• Use for machining operations such as jointing, •• Extended tool life over brazed tooling due to insert
rabbeting, contour cutting, cut-outs in both natural accuracy and superior carbide grades.
and man-made material. D
•• Excellent for high production runs.
Technical Information •• Reduced sharpening costs due to small cost of
•• Shank style cutter body design made from high inserts over standard brazed router bits. E
tensile steel for long life and durability.
•• Single flute design using one insert on the top and
one insert on the bottom. F

Cutting Edge Overall G

Diameter Cutting Edge Length Shank Size Length No. of No. of Inserts Uses
Part No. in. mm in. In. mm in. Flutes Required Insert No.
ND241 18 50 1.97" 3/4" 115 4.53" 1 2+1 TJ384/TJ111 H

Standard inserts begin on page 321.

Spare Parts
Part No. Description J
NP252 Torx Screw Extra Large M4x4 T15
NP171 Torx Wrench T15 K
TJ384 Standard Turnover Insert 30x12x1.5
TJ111 Plunge Point Insert 7.5x12x1.5

3/4"
4.527"

1.968"

.708"

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 317
 Standard Insert Router Bits
A Applications Advantages
•• Designed for use on C.N.C. router machines. •• Outstanding cutting performance due to reduced
•• Can also be used on stationary overhead routers. cutting pressures (designed for rough cut
B
•• Use with mechanical and hand feed operations. applications only).
•• CNC router must have excellent hold downs to •• Extended tool life over brazed tooling due to insert
ensure the least possibility of part movement. accuracy and superior carbide grades.
C
•• Use for jointing, coping, parting, rabbeting, ramp •• Excellent for high production runs requiring thick
plunging, vertical plunging, boring, cutout routing materials to be machined.
D etc. •• Reduced sharpening costs due to small cost of
Technical Information inserts over standard brazed router bits.

E
•• Shank style cutter body design with 3 cutting
rows and a single carbide plung point insert at the
bottom.
F •• Small indexable carbide inserts (pins) are easily
removed with the use of the torx wrench, inserts
on pages 74-77.
G •• Reduced cutting pressure due to up-spiral design.
•• Requires no special set-up fixtures to set knives.
H
•• Maximum RPM 18,000

I
Cutting Edge Cuting Edge Overall with No. of
Cutting Edge Shank L2 Length w/o L3 Length with Plunge Insert Spiral No. of Carbide
J Part No. Diameter Size Plunge Insert Plunge Insert Length Rows Pins Required
ND179 24mm 24mm 3.27" 3.54" 6.02" 3 18
ND183 3/4" 3/4" 1.65" 1.89" 4.13" 3 9
K
ND186 3/4" 3/4" 2.20" 2.44" 4.69" 3 12
ND187LH 3/4" 3/4" 1.65" 1.89" 4.13" 3 9
ND188LH 3/4" 3/4" 2.20" 2.44" 4.69" 3 12

Spare Parts For ND179

Part No. Description
TJ374 Size 2 Straight Inserts (box of 20)
TJ377 Plunge Point Insert (sold individually)
NP149 Torx Clamping Screw M4x6.7 T15
NP126 Torx Wrench T15

Spare Parts for ND183 & ND186

Part No. Description
TJ379 Size 1 Straight Inserts (box of 20)
TJ383 Plunge Point Insert (sold individually)
NP156 Torx Clamping Screw M3x5.5 T9
NP159 Torx Wrench T9
NP162 Torx Clamping Screws for (plunge pt) T9

318 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Standard Insert Router Bits
Applications •• Requires no backing plates or clamping wedges. A
•• Designed for use on C.N.C. router machines. •• Insert is mechanically fastened by the use of face
•• Can also be used on stationary overhead routers. mounted screws.
•• Use with mechanical feed operations. •• Maximum RPM 18,000 B

•• CNC router must have excellent hold downs to Advantages

ensure the least possibility of part movement. •• Reduced set-up time because of fewer parts and a C
•• To round or bevel edges on decorative parts, constant cutting circle.
panels, etc. •• Extended tool life over brazed tooling due to insert
Technical Information accuracy and superior carbide grades. D
•• Shank style cutter body design uses 2 non- •• One cutter body is capable of producing all of the
turnable profiled carbide inserts. radii and bevels by simply changing the inserts.
E
•• Cutter body is profiled to match the carbide insert.

Large F
Required Adjustable Range Diameter Shank Uses Insert No.
Part No. Insert Profile in. in. mm in. Size Top Bottom
ND165 45° .51" 1.14" 34 1.34" 3/4" TJ317 TJ319 G

ND165 1/8" .75" 1.34" 28 1.10" 3/4" TJ323 TJ326

ND165 5/32" .75" 1.34" 30 1.18" 3/4" TJ329 TJ332 H
ND165 13/64" .75" 1.34" 32 1.26" 3/4" TJ335 TJ338
ND165 15/64" .75" 1.34" 34 1.34" 3/4" TJ341 TJ344 I
ND166 45° .87" 1.69" 57 2.24" 3/4" TJ444 TJ447
ND166 1/4" 1.38" 2.20" 49 1.93" 3/4" TJ451 TJ454
J
ND166 21/64" 1.38"
Shank Size 2.20" 53 2.09" 3/4" TJ457 TJ461
ND166 13/32" 1.38" 2.20" 57 2.24" 3/4" TJ464 TJ467
Standard inserts begin on page 321. K

Spare Parts 4.45"

Part No. Description

o Face
NP123 Torx Screw M4x5.9
5
large head T15 Coming
NP171 TorxAdjustable
Wrench
Range T15
from
.79" - 1.34" 1.57" Choose a
Radius
Shank Size

Small Dia. All .79"

Large Dia.

Face Coming
4.45"
Adjustable
Range
from
.51" - 1.14"
1.57"

5o Face
Coming

Adjustable
Range Small Dia. .79"
from Large Dia. 45o
.79" - 1.34" 1.57" Choose a
Radius

Small Dia. All .79"

Large Dia.

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 319
Face Coming

Adjustable
Range
from
.51" - 1.14"
 Standard Insert Router Bits
A Applications •• Utilizes 2 standard 4 sided inserts on the cutting
•• Designed for use on hand router machines. edge.
•• For square trimming of plastic or veneered •• Accuracy maintained even when changing the
B laminated surfaces. inserts.
•• Also designed for copy routing with the template •• Ball bearing is replaceable from the shank side.
attached on the bottom side of the workpiece. •• Maximum RPM 24,000
C
Technical Information Advantages
•• Shank style cutter body design made from high •• Extended tool life over brazed tooling due to insert
D tensile steel for long life and wear resistance. accuracy and superior carbides grades.
•• Small indexable standard carbide inserts are easily •• Reduced sharpening costs due to small cost of
removed with the use of the wrench provided. inserts over standard brazed router bits.
E

F Cutting Edge Cutting Edge Shank No. of

Diameter Length Size Overall Length No. of Inserts Uses Insert
Part No. in. mm in. In. mm in. Flutes Required No.
G ND199 .87" 12 .47" 1/4" 54 2 2 TJ156
ND212 .87" 20 .79" 1/4" 82 2.44" 2 2 TJ117
ND254 .87" 20 .79" 1/4" 62 2.44" 2 2 TJ115
H
ND257 .87" 50 1.97" 1/2" 113 4.44" 2 2 TJ129
ND258 .87" 30 1.18" 1/2" 86 2 2 TJ384
I
Standard inserts begin on page 321.

J Spare Parts
Part No. Description
K TJ115 Std. Carbide Insert 20x12x1.5
TJ117 Std. Carbide Insert 20x12x1.5
TJ129 Std. Carbide Insert 50x12x1.5
TJ384 Std. Carbide Insert
TJ156 Std. Carbide Insert 12x12x1.5
NP219 Ball Bering 22x8
NP123 Torx Clamping Screw M4 T15
NP171 Torx Wrench “T” Handle T15

1/4" Shank

2.440"

20x12

.866"

320 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Standard Inserts
A
12
4

19.5 1.5 B

Dim. Carbide Sold in Dim. Carbide Sold in

Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities C
TJ374 5x7x5 GP 20 TJ115 19.5x12x1.5 GP 10

F
Dim. Carbide Sold in Dim. Carbide Sold in
Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities
TJ379 5x6x5 GP 20 TJ383 18x7x2.0 GP Ea. G

12
4
I
7.5 1.5

Dim. Carbide Sold in J

Dim. Carbide Sold in
Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities
TJ111 7.5x12x1.5 GP 10 TJ377 20x7x2.0 GP Ea.
K

Dim. Carbide Sold in Dim. Carbide Sold in

Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities
TJ156 12x12x1.5 GP 10 TJ117 20x12x1.5 GP 10

Dim. Carbide Sold in Dim. Carbide Sold in

Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities
TJ389 16x7x1.5 GP 10 TJ381 28x7x1.5 GP 10

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 321
 Standard Inserts
A

B
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
C
TJ235 30x5.5x1.1 GP 10
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
D
TJ335 40x19.2x2.2 GP Ea.
TJ338 40x19.2x2.2 GP Ea.
E
12

F
14
29.5 1.5
G
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
H TJ384 30x12x1.5 GP 10

I
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
J TJ317 40x20x2.2 GP Ea.
TJ319 40x20x2.2 GP Ea.

Dim. Carbide Sold in

Part No. WxHxT Grade Quantities
TJ323 40x17.2x2.2 GP Ea.
TJ326 40x17.2x2.2 GP Ea.

Dim. Carbide Sold in

Part No. WxHxT Grade Quantities
TJ341 40x20.2x2.2 GP Ea.
TJ344 40x20.2x2.2 GP Ea.

Dim. Carbide Sold in

Part No. WxHxT Grade Quantities
TJ329 40x18.2x2.2 GP Ea.
TJ332 40x18.2x2.2 GP Ea.

322 12 North American Offices Jasper, Indiana Montreal, Quebec Toronto, Ontario
Main Office Phones (800) 634-8665 (800) 363-9117 (888) 251-2236
 Standard Inserts
A

B
Dim. Carbide Sold in
Part No. WxHxT Grade Quantities
C
TJ226 50x5.5x1.1 GP 10

G
Dim. Carbide Sold in Dim. Carbide Sold in
Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities
TJ241 50x5.5x1.1 GP 10 TJ451 50x20.3x2.2 GP Ea. H
TJ454 50x20.3x2.2 GP Ea.

Dim. Carbide Sold in Dim. Carbide Sold in

Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities
TJ129 50x12x1.7 GP 10 TJ457 50x22.3x2.2 GP Ea.
TJ461 50x22.3x2.2 GP Ea.

Dim. Carbide Sold in Dim. Carbide Sold in

Part No. WxHxT Grade Quantities Part No. WxHxT Grade Quantities
TJ444 50x20.2x2.2 GP Ea. TJ464 50x24.3x22 GP Ea.
TJ447 50x20.2x2.2 GP Ea. TJ467 50x24.3x22 GP Ea.

www.napgladu.com North America’s largest carbide & diamond cutting tool manufacturer. 323