AVIO 200 ICP-OES

CONSUMABLES
AND SUPPLIES

Consumables and Supplies Reference Guide

 Table of Contents
INTRODUCTION Demountable Torches...........................................................3

AND OVERVIEW Quartz Torches....................................................................... 3

Torch O-Rings and Removal Tool............................................ 3

Capable of handling even the most difficult, Torch Assemblies..................................................................3

high-matrix samples without dilution, the
Nebulizers.............................................................................4
Avio® 200 brings a whole new level of
MEINHARD® Nebulizers......................................................... 4
performance and flexibility to ICP.
MEINHARD® Nebulizer Parts.................................................. 4
Better yet, that unprecedented performance
End Cap for Concentric Glass, GemCone
comes with unparalleled ease-of-use. and Similar Nebulizers............................................................ 4
Unique hardware features and the industry’s MicroMist Nebulizer............................................................... 4
most intuitive software combine to make SeaSpray Nebulizers............................................................... 4
multielement measurements as easy as a
PTFE Mira Mist, Ari Mist, and T2100...................................... 4
single-element analysis.
MicroFlow Nebulizers............................................................. 4
The smallest ICP on the market, the Avio 200
GemCone™ and GemTip Nebulizers....................................... 5
offers the most efficient operation,
GemTip Cross-Flow II Nebulizers............................................ 5
reliable data, and lowest cost of ownership
by delivering: Spray Chambers....................................................................5

• The lowest argon consumption of any ICP. Baffled Cyclonic Spray Chambers............................................ 5
Scott Spray Chamber.............................................................. 5
• The fastest ICP startup (ready in just 10
minutes from power off). Injectors and Injector Support Adapters.............................5
• The best sensitivity and resolution at all Alumina Injectors................................................................... 5
wavelengths. Quartz Injectors...................................................................... 6

• The fastest analysis times with minimized Sapphire Injectors................................................................... 6

sample preparation. Injector Support Adapter Kits and O-Rings............................. 6

Reliable. Capable. Affordable. Sample Introduction Kits......................................................7

The Avio 200 is everything you’re Cyclonic/Concentric Kit........................................................... 7

looking for in an ICP. Scott/Cross-Flow II Kit............................................................ 7

Organics Kit............................................................................ 7

Purge Windows.....................................................................7

Autosampler Tubes...............................................................8

Spares....................................................................................8

Pump Tubing.........................................................................8

Internal Standard Kits..........................................................9

PerkinElmer Pure Standards...............................................10

Single-Element Standards – 1,000 μg/mL.............................10
Multi-Element Standards......................................................10
Interference Check Standards............................................... 12

2
 Consumables and Supplies Reference Guide

Demountable Torches
Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles
from 1-3 slots, depending on your application needs. 1-slot torches are the standard torch for aqueous solutions. 3-slot
torches are typically used for organic analysis.

Quartz Torches

Description # of Slots Part No.

Standard 1 N0790131
Hybrid XLT Organics 3 N0790249

Torch O-Rings and Removal Tool

# of Slots Qty Part No.

O-Ring Kit for Adjustable Torch N0790437
Includes:
O-Ring – 0.799 ID 0.103 WD 2 09902223
O-Ring – 0.101 ID 0.070 WD 2 N0791334
O-Ring Kit for Scott Injector N0790440
Includes:
O-Ring - 8.74 ID 1.78 WD 2 09200518
O-Ring - 0.239 ID 0.70 WD 2 09902207
O-Ring - 0.344 ID 0.070 WD 2 N0791333
O-Ring Kit for Cyclonic Injector N0790441
Includes:
O-Ring - 0.239 ID 0.70 WD 2 09902207
O-Ring - 0.301 ID 0.70 WD 2 09926070
O-Ring - 0.344 ID 0.070 WD 2 N0791333
O-Ring Removal Tool 09920410
Torch Cassette Complete N0790138

Torch Assemblies
Torch Assemblies
Description Part No.
Quick Change Torch Module - N0790606
Scott Spray Chamber/Cross-Flow Nebulizer
Includes: GemTip Cross-Flow Nebulizer (N0780546), 1-Slot
Quartz Torch (N0790131), 2.0 mm Alumina Injector (N0791183),
Scott Spray Chamber (N0791499).
Quick Change Torch Module - N0790607
Cyclonic Spray Chamber/Concentric Nebulizer
Includes: Type K1 Standard Nebulizer (N0777707), 1-Slot
Quartz Torch (N0790131), 2.0 mm Alumina Injector (N0791183),
Baffled Cyclonic Spray Chamber (N0791352).

3
 Consumables and Supplies Reference Guide

Nebulizers
PerkinElmer offers high-quality sample introduction components for a wide variety of applications.

MEINHARD® Nebulizers
Provide excellent sensitivity and precision for aqueous solutions and samples with few dissolved
solids (less than 1%). MEINHARD® Nebulizers are self-aspirating and must not be used with solutions
containing hydrofluoric acid. All require an end cap for use with Ryton® Scott spray chambers.
Type Application Part No.
Type K1 (standard) Ar low-flow, High dissolved solids N0777707
Type K3 Reduced flow, and organics N0681574

MEINHARD® Nebulizer Parts

Description Part No.
Liquid-End Connector Kit, 10" length by 0.020" ID x 0.062" OD N0791018
Nebulizer Clip for MEINHARD® Nebulizers N0777460

End Cap for Concentric Glass, GemCone and Similar Nebulizers

Description Part No.
Scott Spray Chamber End Cap N0680504

MicroMist Nebulizers
Ar Flow Rate Uptake Rate Part No.
0.7 L/min 0.05 mL/min N0775349
0.7 L/min 0.1 mL/min N0775348
0.7 L/min 0.2 mL/min N0775347
0.7 L/min 0.6 mL/min N0775346

SeaSpray Nebulizers
Ar Flow Rate Uptake Rate Part No.
0.7 L/min 2 mL/min N0775345

PEEK MiraMist® Nebulizer

The MiraMist® fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its
features include standard pressure (45 psi), low sample flow and enhanced parallel path design.
Description Uptake Rate Part No.
PEEK MiraMist ®
0.2 to 2.5 mL/min N0775330
PTFE Mira Mist 0.02 to 2.5 mL/min N0777031
Ari Mist 0.05 to 1.0 mL/min N0777032
T2100 0.5 to 3.0 mL/min N0777033

MicroFlow Nebulizers
MicroFlow nebulizers are constructed entirely from chemically resistant fluoropolymers, ideal for
strong acids, alkalis, organics, high salt solutions and high solid concentrations. They are resistant
to clogging, are reliably self-aspirated or pumped and produce a fine aerosol for high transport
efficiency and high sensitivity.
Description Part No.
PolyPro ST Nebulizer N0777219
PFA-ST Nebulizer N0777049
PFA-ST3 Microflow Nebulizer N0777676
4
 Consumables and Supplies Reference Guide

Nebulizers, continued

GemCone™ and GemTip Nebulizers

Low-Flow GemCones™ permit lower nebulizer gas flow rates, useful for spectral lines with high
excitation energies and for providing a more robust plasma. GemCone™ Nebulizers require an end
cap for use with Ryton Scott Spray Chambers.
Description Part No.
GemCone Low-Flow Nebulizer
™
N0770358
GemCone™ High Dissolved Solids N0690670
GemCone™ Sample Capillary Adapter N0371505
Scott Spray Chamber End Cap for GemCone Nebulizers
™
N0680504
Quick Disconnect Tubing N0770336

GemTip™ Cross-Flow II Nebulizers

Excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and
samples with less than 5% dissolved solids.
Description Part No.
GemTip™ Cross-Flow II Nebulizer N0780546
GemTip Cross-Flow II Tip Kits
™
N0780676
GemTip™ Cross-Flow Nebulizer O-Ring Kit N9300067
Includes: 09902001 qty. 2, 09902033 qty. 2, 09902151 qty. 3,
09921003 qty. 1, 3 cm of Teflon® sample tubing.

Spray Chambers
The spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit
the appropriate droplet size distribution to reach the plasma.
Cyclonic Spray Chambers
Description Part No.
Baffled Cyclonic (Standard) N0791352
HF Resistant Cyclonic Spray Chamber N0790373
TFE PTFE O-Ring free, 50 mL with grounding strap included.

Scott Spray Chamber*

The Scott Spray Chamber is corrosion-resistant and is inert to most mineral acids including HF, aqua
regia and all organic solvents normally used in ICP analyses.
Description Part No.
Scott Spray Chamber N0790384
Scott Spray Chamber Clamp Adapter N0790296
*Product image shown may vary from actual product.

Injectors and Injector Support Adapters

Alumina Injectors
Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also
used with less volatile organic solvents, e.g., xylene.
Description Part No.
0.80 mm i.d. N0791180
1.2 mm i.d. N0791181
1.2 mm i.d. (1.2 mm entire length of tube) N0791182
2.0 mm i.d. (standard with Avio instrument) N0791183
5
 Consumables and Supplies Reference Guide

Injectors and Injector Support Adapters, continued

Quartz Injectors
Quartz injectors are designed for organic solvents and
non-HF matrices.
Dimensions Part No.
0.80 mm i.d. N0791185
1.2 mm i.d N0791186
1.2 mm i.d. (1.2 mm entire length of tube) N0791187
1.6 mm i.d. N0791188
2.0 mm i.d. N0791189
3.0 mm i.d. N0791190

Sapphire Injectors
Sapphire injectors are ideal for silicon applications.
Dimensions Part No.
2.0 mm i.d. N0791184

Injector Support Adapter Kits and O-Rings

Dimensions Part No.

Injector Adapter Kit-Cyclonic (includes o-rings) N0790141
Injector Adapter Kit-Scott (includes o-rings) N0790156
Injector Adapter O-Ring Kit Cyclonic N0790441
(incl. 09902207 qty. 2, 09926070 qty. 2,
N0791333 qty. 2)
Injector Adapter O-Ring Kit Scott N0790440
(incl. 09902207 qty. 2, 09200518 qty. 2,
N0791333 qty. 2)

6
 Consumables and Supplies Reference Guide

Sample Introduction Kits

Cyclonic/Concentric Kit
Part No.
Cyclonic/Concentric Kit* N0790608
Includes:
1 Slot Quartz Torch N0790131
2.0 mm i.d. Alumina Injector N0791183
Baffled Cyclonic Spray Chamber N0791352
MEINHARD® Type K1 Nebulizer N0777707
Injector Adapter N0790141
Includes one of each.
*

Scott/Cross-Flow II Kit
Part No.
Scott/Cross-Flow II Kit* N0790609
Includes:
1 Slot Quartz Torch N0790131
2.0 mm i.d. Alumina Injector N0791183
Scott Spray Chamber* N0790384
GemTip™ Cross-Flow II Nebulizer N0780546
Injector Adapter N0790156
Scott Spray Chamber Clamp Adapter N0790296
Includes one of each.
*

Organics Kit
Qty. Part No.
Organics Kit* N0790610
Includes:
3 Slot Quartz Torch 2 N0790249
1.2 mm i.d. Alumina Injector 2 N0791181
Baffled Cyclonic Spray Chamber 1 N0791352
GemCone™ Low-Flow Nebulizer 1 N0770358
Cyclonic Spray Chamber Adapter 1 N0790141

Purge Windows

Purge Extension Windows

ICP Model View Part No.
Avio 200 Axial 09992731
Avio 200 Radial* N0690672
Optical Kit (incl. Windows and O-Rings) Axial/Radial N0790439
Axial Flat Mirror Kit Axial N0790196
*Product not shown.

7
 Consumables and Supplies Reference Guide

Autosampler Tubes

Autosampler Graduated Tubes with Red Caps

Capacity Size Type Qty Part No.
15 mL* 17 mm x 120 mm Conical Bottom 500/50 per bag B0193233
50 mL* 28 mm x 115 mm Conical/Freestanding 500/25 per bag B0193234

Autosampler Tubes
Capacity Size Type Qty Part No.
8 mL 13 mm x 100 mm Round Bottom 1,200 bulk N0777156
15 mL 17 mm x 100 mm Round Bottom 1,200 bulk N0777167
Plugs for N0777167 (blue) Plugs Only 1,200 bulk N0777599
Plugs for N0777071 (white) Plugs Only 1,000 bulk N0777072
50 mL* 30 mm x 115 mm Conical 500 bulk with teal N0777693
flat caps
50 mL* 30 mm x 115 mm Conical 500/50 per bag with N0777691
teal flat caps
*Graduated tubes

Spares

Spares

Description Part No.

Air Filter (intake) – Requires 2 09995098
Air Filter Assembly for Instrument Air Supply N0775325
Replacement Air Filter Element for N0775325 N9306067
Polyscience WhisperCool Chiller Replacement Air Filter N0777095
Chiller Coolant Mix 30 Plus-Five 1/2 Gallons N0776200

Pump Tubing

Standard Flared Solvent

i.d. PVC PVC Flex Viton® Santoprene® Silicone
(mm) Stop Colors (Pkg 12) (Pkg 12) (Pkg 12) (Pkg 12) (Pkg 12) (Pkg 6)
0.19 orange red N0695476 N0773111
0.25 orange blue N0773117 N0773112
0.38 orange green N0777110 N0777042 N0773113
0.44 green yellow N0773113
0.51 orange yellow N0777476 N0777446
0.64 orange white N0777711
0.76 black black 09908587 N0777043 00473550 N0773118 00473552
1.02 white white N0777442 N0777441
1.14 red red 09908585 09923037 N0773115 N0773119 N0691595
1.30 gray gray N0777445 N0777444 N0777443
1.42 yellow yellow N0777521
1.52 yellow blue 09923536
1.65 blue blue N0777447
1.85 green green N0777518 N0773116
2.06 purple purple N0777561
2.79 purple white 02508080 09923448
3.18 black white N8122012

8
 Consumables and Supplies Reference Guide

Internal Standard Kits

In-line Standard Additions kits, one which includes a glass mixing chamber/combiner for solutions which do not contain
HF and another which includes an inert mixing chamber/combiner. Both kits are completely modular so that damaged
or worn components can easily be replaced. The heart of the kit is the mixing chamber/combiner. It is designed for zero
dead volume on the input ends which accommodate the sample and addition lines. The output end is designed with a
small mixing chamber so that the sample and added reagent are intimately mixed prior to introduction to the nebulizer.
All connections to the mixing chamber/combiner use EzyFit connectors. A sampling probe for the reagent addition bottle
is included so that it remains well anchored in the bottle. Inline addition of internal standards and ionization buffers
provides an efficient means of accurately and precisely dosing all of your samples without extra effort or the risk of error
or contamination. Internal standardization is often used to compensate for physical and mass-space interferences in
ICP spectrometry. In many cases, it also enhances short-term and long-term reproducibility.

HF-Resistant Internal Standard Kit

Description Part No.

HF-Resistant Internal Standard Kit N0774067
Includes:
HF Mixing T-piece N0777466
Internal Standard Sample Probe 0.25 mm ID N0777465
EzyFit Sample Tube 0.5 mm ID N0777463
UniFit-EzyFit Sample Tube N0777061
EzyFit Internal Standard Tube 0.25 mm ID N0777464
Vitex® Gripper Paper - Qty. 6 N0777848
Orange-Blue Flared End PVC Tubing N0773112
0.25 mm ID – Qty. 12

Non HF-Resistant Internal Standard Kit

Description Part No.

Non HF-Resistant Internal Standard Kit N0774068
Includes:
EzyFit Glass Mixing T-piece N0777461
Internal Standard Sample Probe 0.25 mm ID N0777465
EzyFit Sample Tube - Twin N0777462
EzyFit Sample Tube 0.5 mm ID N0777463
EzyFit Internal Standard Tube 0.25 mm ID N0777464
Vitex Gripper Paper - Qty. 6
®
N0777848
Orange-Blue Flared End PVC Tubing N0773112
0.25 mm ID – Qty. 12
UniFit-EzyFit Sample Tube N0777061

9
 Consumables and Supplies Reference Guide

PerkinElmer Pure Standards

Single-Element Standards – 1,000 μg/mL

Whatever your application, you can depend on PerkinElmer Pure Standards to yield reliable, accurate
results. PerkinElmer offers a wide selection of atomic spectroscopy calibration standards. Each solution
is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.
Please visit our website for a complete listing of Atomic Spectroscopy Standards.
125 mL 500 mL
Element Symbol Matrix Part No. Part No.
Aluminum Al 2% HNO3 N9300184 N9300100
Cadmium Cd 2% HNO3 N9300176 N9300107
Calcium Ca 2% HNO3 N9303763 N9300108
Chromium Cr 2% HNO3 N9300173 N9300112
Copper Cu 2% HNO3 N9300183 N9300114
Iron Fe 2% HNO3 N9303771 N9300126
Lead Pb 2% HNO3 N9300175 N9300128
Mercury Hg 10% HNO3 N9300174 N9300133
Sodium Na 2% HNO3 N9303785 N9300152
Zinc Zn 2% HNO3 N9300178 N9300168

Multi-Element Standards
Matrix Contents Vol. Part No.
Multi-Element Solution 1
2% HNO3 10 μg/mL: Be, Bi, Ce, Co, In, Mg, 125 mL N9300231
Ni, Pb, U
Multi-Element Solution 2
5% HNO3 10 μg/mL: Ce, Dy, Er, Eu, Gd, Ho, La, 125 mL N9300232
Lu, Nd, Pr, Sc, Sm, Tb, Th, Tm, Y, Yb
Multi-Element Solution 3
5% HNO3 10 μg/mL: Ag, Al, As, Ba, Be, Bi, Ca, 125 mL N9300233
Cd, Co, Cr, Cs, Cu, Fe, Ga, Hg*, In, K,
Li, Mg, Mn, Na, Ni, Pb, Rb, Se, Sr, Tl,
U, V, Zn *Supplied in separate bottle.
Multi-Element Solution 3 without Mercury N9301720
Multi-Element Solution 4
5% HCl/1% HNO3 10 μg/mL: Au, Hf, Ir, Pd, Pt, Rh, Ru, 125 mL N9300234
Sb, Sn, Te
Multi-Element Solution 5
H2O/tr HF 10 μg/mL: B, Ge, Mo, Nb, P, Re, S, Si, 125 mL N9300235
Ta, Ti, W, Zr
PerkinElmer Pure I
5% HNO3 400 μg/mL: Tl 125 mL N9303940
200 μg/mL: Bi, In, Pb
150 μg/mL: Ga
100 μg/mL: Al
50 μg/mL: Ag, Ni
25 μg/mL: Cr
20 μg/mL: Cd, Co, Cu, Zn
15 μg/mL: B, Fe
5 μg/mL: Ba, Mn
1 μg/mL: Be, Sr

10
 Consumables and Supplies Reference Guide

PerkinElmer Pure Standards, continued

Multi-Element Standards, continued

Matrix Contents Vol. Part No.

PerkinElmer Pure IV
10% HNO3 1000 μg/mL: Ag, Al, B, Ba, Bi, Ca, Cd, 125 mL N9303941
Co, Cr, Cu, Fe, Ga, In, 125 mL K, Li,
Mg, Mn, Na, Ni, Pb, Sr, Tl, Zn
PerkinElmer Pure VIII
5% HNO3 100 μg/mL: Al, B, Ba, Be, Bi, Ca, Cd, 125 mL N9303942
Co, Cr, Cu, Fe, Ga, K, 125 mL Li, Mg,
Mn, Na, Ni, Pb, Se, Sr, Te, Tl, Zn
PerkinElmer Pure IX
5% HNO3 100 μg/mL: As, Be, Pb, Cd, Cr, Ni, Se, Tl 125 mL N9303943
Mercury 100 μg/mL
5% HNO3 100 μg/mL: Mercury in 5% HNO3 125 mL N9300223
PerkinElmer Pure X
2% HNO3 35,000 ug/L: Ca 125 mL N9303944
15,000 ug/L: Mg
8,000 ug/L: Na
3,000 ug/L: K
100 ug/L: B, Fe, Mo, Sr
50 ug/L: As, Ba, Ni, V, Zn
30 ug/L: Mn
25 ug/L: Co, Pb
20 ug/L: Be, Cd, Cr, Cu
10 ug/L: Bi, Se, Tl
Mercury 8 μg/mL
5% HNO3 8 μg/mL: Mercury in 5% HNO3 125 mL N9303954
PerkinElmer Pure XI
5% HNO3 2500 μg/mL: Zn 125 mL N9303945
900 μg/mL: Cr, Pb
800 μg/mL: Cu
200 μg/mL: Ni
10 μg/mL: Cd
Mercury 5 μg/mL
5% HNO3 5 μg/mL: Mercury in 5% HNO3 125 mL N9303949
PerkinElmer Pure XIII
5% HNO3 500 μg/mLL: Al 125 mL N9303946
250 μg/mL: V
100 μg/mL: As, Be, Co, Cr, Cu, Fe, Mn,
Ni, Pb, Zn
25 μg/mL: Cd, Se
PerkinElmer Pure XVII
15% HCL/trace HF 100 μg/mL: Hf, Ir, Sb, Sn, Ta, Ti, Zr 125 mL N9303948

11
 Consumables and Supplies Reference Guide

PerkinElmer Pure Standards, continued

Interference Check Standards

Matrix Contents Vol. Part No.
Interferents A
5% HNO3 5,000 μg/mL: Al, Ca, Mg 500 mL N9300226
2,000 μg/mL: Fe
Alternate Interferents A
5% HNO3 1,000 μg/mL: Cr, Cu, Mn, Ni, Ti, V 500 mL N9300228
Analytes B
5% HNO3/trTartaric Acid/tr HF 125 mL N9300227
100 μg/mL: Cd, Ni, Zn
60 μg/mL: Sb
50 μg/mL: Ba, Be, Co, Cr, Cu, Mn, V
20 μg/mL: Ag
10 μg/mL: As, Tl
Alternate Analytes B
5% HNO3/tr Tartaric Acid/tr HF 125 mL N9300229
100 μg/mL: Al, As, B, Mo, Na, Sb, Se, Tl
10 μg/mL: Ca, Fe, Mg, Si

Every day, you can count on PerkinElmer to provide you with solutions that deliver reliable performance, control operating costs
and maximize operational time. Our complete portfolio of consumables, parts, supplies, training and service helps you meet both
routine and demanding measurement challenges. We invest heavily in testing and validating our products to ensure you receive
guaranteed compatibility and performance – on-time, for every instrument in your laboratory.

For a complete listing of consumables and supplies, please visit www.perkinelmer.com/supplies

PerkinElmer, Inc.
940 Winter Street
Waltham, MA 02451 USA
P: (800) 762-4000 or
(+1) 203-925-4602
www.perkinelmer.com

For a complete listing of our global offices, visit www.perkinelmer.com/ContactUs

Copyright ©2016, PerkinElmer, Inc. All rights reserved. PerkinElmer® is a registered trademark of PerkinElmer, Inc. All other trademarks are the property of their respective owners.

012699A_01 PKI