breakdown region to its normal (reverse saturation) level.

It is found that for a suitably designed diode,

the breakdown voltage is very stable over a wide range of reverse currents. This quality gives the
breakdown diode many useful applications as a voltage reference source.

The critical value of the voltage, at which the breakdown of a P-N junction diode occurs, is called the
breakdown voltage. The breakdown voltage depends on the width of the depletion region, which, in
turn, depends on the doping level. The junction offers almost zero resistance at the breakdown point.

There are two mechanisms by which breakdown can occur at a reverse biased P-N junction:

1. avalanche breakdown and

2. Zener breakdown.

Avalanche breakdown

The minority carriers, under reverse biased conditions, flowing through the junction acquire a
kinetic energy which increases with the increase in reverse voltage. At a sufficiently high reverse
voltage (say 5 V or more), the kinetic energy of minority carriers becomes so large that they knock out
electrons from the covalent bonds of the semiconductor material. As a result of collision, the liberated
electrons in turn liberate more electrons and the current becomes very large leading to the breakdown
of the crystal structure itself. This phenomenon is called the avalanche breakdown. The breakdown
region is the knee of the characteristic curve. Now the current is not controlled by the junction voltage
but rather by the external circuit.

Zener breakdown

Under a very high reverse voltage, the depletion region expands and the potential barrier
increases leading to a very high electric field across the junction. The electric field will break some of
the covalent bonds of the semiconductor atoms leading to a large number of free minority carriers,
which suddenly increase the reverse current. This is called the Zener effect. The breakdown occurs at a
particular and constant value of reverse voltage called the breakdown voltage, it is found that Zener
breakdown occurs at electric field intensity of about 3 x 107 V/m.
 Fig 1.18: Diode characteristics with breakdown

Either of the two (Zener breakdown or avalanche breakdown) may occur independently, or
both of these may occur simultaneously. Diode junctions that breakdown below 5 V are caused by
Zener effect. Junctions that experience breakdown above 5 V are caused by avalanche effect. Junctions
that breakdown around 5 V are usually caused by combination of two effects. The Zener breakdown
occurs in heavily doped junctions (P-type semiconductor moderately doped and N-type heavily doped),
which produce narrow depletion layers. The avalanche breakdown occurs in lightly doped junctions,
which produce wide depletion layers. With the increase in junction temperature Zener breakdown
voltage is reduced while the avalanche breakdown voltage increases. The Zener diodes have a negative
temperature coefficient while avalanche diodes have a positive temperature coefficient. Diodes that
have breakdown voltages around 5 V have zero temperature coefficient. The breakdown phenomenon
is reversible and harmless so long as the safe operating temperature is maintained.

1.7 ZENER DIODES

The Zener diode is like a general-purpose signal diode consisting of a silicon PN junction. When biased
in the forward direction it behaves just like a normal signal diode passing the rated current, but as soon
as a reverse voltage applied across the zener diode exceeds the rated voltage of the device, the diodes
breakdown voltage VB is reached at which point a process called Avalanche Breakdown occurs in the
semiconductor depletion layer and a current starts to flow through the diode to limit this increase in
voltage.

The current now flowing through the zener diode increases dramatically to the maximum circuit value
(which is usually limited by a series resistor) and once achieved this reverse saturation current remains
fairly constant over a wide range of applied voltages. This breakdown voltage point, VB is called the
"zener voltage" for zener diodes and can range from less than one volt to hundreds of volts.
The point at which the zener voltage triggers the current to flow through the diode can be very
accurately controlled (to less than 1% tolerance) in the doping stage of the diodes semiconductor
construction giving the diode a specific zener breakdown voltage, (Vz) for example, 4.3V or 7.5V. This
zener breakdown voltage on the I-V curve is almost a vertical straight line.

Zener Diode I-V Characteristics

Fig 1.19 : Zener diode characteristics

The Zener Diode is used in its "reverse bias" or reverse breakdown mode, i.e. the diodes anode
connects to the negative supply. From the I-V characteristics curve above, we can see that the zener
diode has a region in its reverse bias characteristics of almost a constant negative voltage regardless of
the value of the current flowing through the diode and remains nearly constant even with large
changes in current as long as the zener diodes current remains between the breakdown current IZ(min)
and the maximum current rating IZ(max).

This ability to control itself can be used to great effect to regulate or stabilize a voltage source against
supply or load variations. The fact that the voltage across the diode in the breakdown region is almost
constant turns out to be an important application of the zener diode as a voltage regulator. The
function of a regulator is to provide a constant output voltage to a load connected in parallel with it in
spite of the ripples in the supply voltage or the variation in the load current and the zener diode will