Scribd
Upload
15 views3 pages

SEBU9310

Uploaded by

muriol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views3 pages

SEBU9310

Uploaded by

muriol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SEBU9310-09 (en-us)

February 2024

Operation and
Maintenance
Manual
415F2 Industrial Loader
PF4 1-UP (415F2 IL)

Language: Original Instructions

Scan to find and purchase genuine Cat® parts and related


service information.
i07966018

Important Safety Information


Most accidents that involve product operation, maintenance and repair are caused by failure to observe
basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous
situations before an accident occurs. A person must be alert to potential hazards, including human factors
that can affect safety. This person should also have the necessary training, skills and tools to perform these
functions properly.
Improper operation, lubrication, maintenance or repair of this product can be dangerous and could
result in injury or death.
Do not operate or perform any lubrication, maintenance or repair on this product, until you verify
that you are authorized to perform this work, and have read and understood the operation,
lubrication, maintenance and repair information.
Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings
are not heeded, bodily injury or death could occur to you or to other persons.
The hazards are identified by the “Safety Alert Symbol” and followed by a “Signal Word” such as
“DANGER”, “WARNING” or “CAUTION”. The Safety Alert “WARNING” label is shown below.

The meaning of this safety alert symbol is as follows:


Attention! Become Alert! Your Safety is Involved.
The message that appears under the warning explains the hazard and can be either written or pictorially
presented.
A non-exhaustive list of operations that may cause product damage are identified by “NOTICE” labels on
the product and in this publication.
Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this publication and on the product are, therefore, not all inclusive. You must not
use this product in any manner different from that considered by this manual without first
satisfying yourself that you have considered all safety rules and precautions applicable to the
operation of the product in the location of use, including site-specific rules and precautions
applicable to the worksite. If a tool, procedure, work method or operating technique that is not
specifically recommended by Caterpillar is used, you must satisfy yourself that it is safe for you
and for others. You should also ensure that you are authorized to perform this work, and that the
product will not be damaged or become unsafe by the operation, lubrication, maintenance or repair
procedures that you intend to use.
The information, specifications, and illustrations in this publication are on the basis of information that was
available at the time that the publication was written. The specifications, torques, pressures,
measurements, adjustments, illustrations, and other items can change at any time. These changes can
affect the service that is given to the product. Obtain the complete and most current information before you
start any job. Cat dealers have the most current information available.

NOTICE
When replacement parts are required for this product Caterpillar recommends using original Cater-
pillar® replacement parts.
Other parts may not meet certain original equipment specifications.
When replacement parts are installed, the machine owner/user should ensure that the machine re-
mains in compliance with all applicable requirements.

In the United States, the maintenance, replacement, or repair of the emission control devices and
systems may be performed by any repair establishment or individual of the owner's choosing.
SEBU9310-09 3
Table of Contents

Table of Contents Operator Station .............................................. 38

Foreword ........................................................... 4 Product Information Section

General Information ........................................ 39


Safety Section
Identification Information ................................. 43
Safety Messages............................................... 6

Additional Messages ....................................... 14 Operation Section

General Hazard Information............................ 17 Before Operation ............................................. 48

Crushing Prevention and Cutting Prevention.. 21 Machine Operation .......................................... 50

Burn Prevention............................................... 21 Controls ........................................................... 76

Fire Prevention and Explosion Prevention...... 22 Engine Starting................................................ 79

Fire Safety ....................................................... 25 Parking ............................................................ 82

Fire Extinguisher Location............................... 26 Transportation Information .............................. 85

Tire Information ............................................... 27 Towing Information .......................................... 87

Electrical Storm Injury Prevention ................... 28 Engine Starting (Alternate Methods)............... 89

Before Starting Engine .................................... 28 Maintenance Section

Engine Starting................................................ 28 Tire Inflation Information.................................. 91

Visibility Information ........................................ 28 Lubricant Viscosities and Refill Capacities ..... 92

Restricted Visibility .......................................... 29 Maintenance Support ...................................... 99

Before Operation ............................................. 29 Maintenance Interval Schedule..................... 102

Operation......................................................... 29 Warranty Section

Engine Stopping .............................................. 33 Warranty Information..................................... 158

High Pressure Fuel Lines ................................ 33 Reference Information Section

Work Tools....................................................... 35 Reference Materials ...................................... 159

Parking ............................................................ 35 Index Section

Slope Operation .............................................. 35 Index.............................................................. 162

Equipment Lowering with Engine Stopped ..... 36

Sound Information and Vibration Information . 36

You might also like