Film Scanner

TON168

User Manual
 Index
I. Unpack Device

Unpack
I. Device………………………………………………….. 2

Install
II. Film into Holder ………………………………………... 3
Film Scanner Nega ve Film Holder Slide Film Holder

III. Connect Device………………………………………………….. 7

IV. Install Bundled Software ………………..….………………….. 8

U-Disk Quick Start Guide USB cable Clean brush

Use
V. Device ……………………………………………………… 14

NOTE
VI. Introduce User Interface ……………………………………... 19

VII. Specifications …………..……………………………………… 26


Appendix. Clean Device



-2-
1-
 II. Install �ilm into holder

Install the slide into holder:

-3-
Install the negae film into holder:

-4-
 NOTE

 To avoid mirror image, follow the serial numbers (from le to right) on top of
film when install negav efilm into holder.

Figure 1

 If the image is upside down [see fig. 2] , the image can be corrected by
con “Rotate” func on in Image Scan Tool a er capture [seefig. 3].

Figure 2

-5-
Figure 3

-6-
 III. Device

Copy bu
Power status LED

USB Cable

Film Slot

Plug in USB cable to computer without installing any necessary driver. When the
status icon on the le bu on corner shows informn “Your device is ready to
use”. The scanner is now ready to use. Note: although the scanner is driverless, you
s ll have to install the CD ROM so you can use the “Launch Image Scan Tool”
applica

-7-
 IV. Install bundled software

The package bundled with a friendly and

easy to use PC and Mac so ware that has
for capture, save, delete, mirror,
rotate and exposure and color control.

Please follow the steps to complete the

applica on instan for PC

Note: This scanner is driverless. The CD is

used to complete the applica on
installa on only.

PC:

-8-
-9-
-10-
“Im age scanTool”und er program files.
Remark: If you are using Win XP 64 or Vista 32/64, you may also need to run

-11-
Mac:
01. Turn on Mac computer.
02. Insert the installan CD into the CD/DVD drive.
03. Copy “ImageScanTool.mpkg” into hard disk and double-click it.

-12-
-13-
V. Device

1. Put Film into film holder

2. Insert the holder into device

3. Make sure USB cable is connected to the device and PC/Mac

-14-
4. To launch the so ware:

PC: on Desktop, double-click on “Launch Image Scan Tool” icon.

Mac: click on “Applic” folder at the Dock, double-click on “Image

Scan Tool.app”.

-15-
5. Enter operan interface as below:
PC:

Mac:

-16-
6. Press “Copy” hard bu to capture the image to store in thumbnail.

7. Click on func of mirror, rotate, color and brightness control to make image to
prefer state.

-17-
Press
8. Save to store captured images to hard disk. The images stored in thumbnail
bar is cleared ar save.

9. Retrieve saved images from the hard disk to further review and edit.

-18-
 VI. Introduce user interface

First step is always to select the correct Film Type.

PC

Negav e

Slide

B&W

-19-
 User can either click on “Snapshot” icon or press the hard key “Copy”
touch n to capture images. Captured images will be first stored in the

thumbnail bar. Total of 12 thumbnail images are able to store in the bar.
Touch button

PC

The image control, mirror, rotate, color and brightness in Image Scan Tool is preview instantly
in Snap Shot window.

-20-
Press the “Mirror” icon to flip the Live View image to preview on the Snap Shot window.
PC

Or apply the Rotate func by pressing “Rotate” icon. The image will be rota ng in 90
degrees clockwise on one single click, con l the prefer posi is set.
PC

-21-
To manually adjust the image brightness and color level, click on “Color/Brightness
Adjustment” icon. A pop up window containing Brightness bar and Color R, G, B bar will show
up on screen and pulling the level bar to make adjustment.

PC

-22-
 To delete a image, select the thumbnail image wish to delete and click on “Delete” icon.
PC

The stored images in thumbnail bar need to be saved to hard disk. The default directory is
shown as below:

PC

-23-
Or user can save to a prefer hard disk loca by pressing the directory icon. Another pop up
window will show up to select the directory for saving images.
PC

Press “Save” icon to save images to hard disk. The thumbnail bar is cleared ar save.
PC

-24-
 When completed the capture, user can press “Exit” bu to quit this Image Scan Tool.
Then, review captured images or process more fancy modifica on with bundle so ware for
PC.

PC

-25-
VII. Speci�ications

Image Sensor 8mega CMOS sensor

Lens Multi-elements precision lens
Focus Range Fixed focus
Exposure Control Automatic, manual adjustment for enhancement
Color Balance Automatic, manual adjustment for enhancement
Scan Quality Approx. 2400dpi / 4800 dpi (Interpolation)
Data Conversion 10 bits per color channel
Scan Method Single pass
Light Source Back light (3 white LEDs)
Interface USB 2.0
Power Power via USB port
Dimensions 83.3x83x12.2mm
Weight 220g

Windows XP/Vista/Win7/Win8 32/64-bit;

System requirements

-26-
 Appendix. Clean Device

When viewing without the film holder on the film slot if found any dust dot on live view
window, user is able to clean it by using the bundled clean brush to wipe the dust.

NOTE

Version
 We strongly suggest using a clean, dry, non-alcohol co on 1.1
swab to clean the glass surface
periodically to produce a clear image during oper

-27-