NS Assignment 2
NS Assignment 2
Instructions:
1. SET-1 questions should be answered by ROLLs: .23691A0467- 23691A0483
2. SET-2 questions should be answered by ROLLs: 23691A0484-23691A0499
3. SET-3 questions should be answered by ROLLs: 23691A04A0- 23691A04B6
4. SET- 4 questions should be answered by ROLLs: 23691A04B7- 23691A04D2
5. Write the answer by typing in your own words.
CO3: Analyze the response of RL, RC and RLC circuit with different inputs
SET-1
1. In a series R-L circuit, the current and voltage are given as:
i = 1cos(314t − 20 ), v = 10 cos(314t + 10 )
Find the value of R and L. [CO3]
2. What is the relation between Q-factor, Resonant frequency and bandwidth in series resonating circuit?
[CO4]
1) Find the amplitude, phase, angular frequency, cyclic frequency and time period of the following signal.
(a) v = 12 cos(50t + 10 )
(b) v = 5sin(4 t − 60 ) [CO3]
2) Obtain the expression for frequency at series resonance. Write down few properties of series resonating
circuit. [CO4]
SET-3
2. What is the resonance frequency of a series RLC circuit, where , R= 10 , L = 25 H and C = 100 F
Calculate Q-factor also [CO4]
3. Explain different types of interconnections for two-port networks. For each type of interconnection
(series, parallel, and cascade), which parameters are useful in finding the overall or net matrix? [CO5]
SET-4
2. Find the relation between half power frequency, f1 , f 2 and Bandwidth (BW) in terms of
resonance frequency ( f 0 ). Calculate half power frequency of a series resonant circuit, where
f 0 = 150kHZ and BW=75 kHZ [CO4]