Scribd
Upload
30 views

YS Material Data Sheet For PPH

Uploaded by

Anindra Farras
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

YS Material Data Sheet For PPH

Uploaded by

Anindra Farras
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Shandong Yasu New Material Co.

, Ltd
No.1266, Sanba East Road, Tianqu Industrial Park,
Dezhou City, Shandong Province, China 253000
E: [email protected] W: www.ysplastics.com

PP-H / Polypropylene Homopolymer

Special properties Typical areas of application


· Excellent chemical resistance · Chemical engineering & tankbuilding
· High weldability · Ventilation & duct systems
· High impact strength · Pump parts

Technical Data Sheet

Physical properties Test Standard Value Unit

Density ASTM D792 0.91-0.93 g/cm³


Water Absorption ASTM D570 <0.10 %

Mechanical properties Test Standard Value Unit

Hardness ASTM D2240 72 Shore D


Tensile Strength at yield 23℃ ASTM D638 4700 psi
Coefficient of Friction, Dynamic - 0.25-0.28 -
Izod Impact, Notched ASTM D256 1.0 ft-lb/in

Thermal properties Test Standard Value Unit

Maximum Service Temperature, Air - 83 ℃


Melting Point ASTM D3418 163 ℃
Heat Deflection Temperature ASTM D648 100 ℃
Flammability, UL94 - HB -

Electrical Properties Test Standard Value Unit

Surface Resistivity ASTM D257 ≥1014 Ω/cm


Dielectric Constant ASTM D150 2.4 1MHz
Dielectric Strength ASTM D149 45 KV/mm

Note:
*The data stated above are typical values intended for reference and comparison purposes only.
*The data should not be used as a basis for design specifications or quality control.
*The information is provided as a guide to the best of our knowledge and given without obligation or liability.
*Testing under individual application circumstances is recommended.

www.ysplastics.com Page:1 / 1

You might also like