1 12 PDF
1 12 PDF
Fire Code
2012 Edition
NFPA® codes, standards, recommended practices, and guides (“NFPA Documents”), of which the document
contained herein is one, are developed through a consensus standards development process approved by the
American National Standards Institute. This process brings together volunteers representing varied viewpoints and
interests to achieve consensus on fire and other safety issues. While the NFPA administers the process and
establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or
verify the accuracy of any information or the soundness of any judgments contained in NFPA Documents.
The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever,
whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of,
or reliance on NFPA Documents. The NFPA also makes no guaranty or warranty as to the accuracy or completeness
of any information published herein.
In issuing and making NFPA Documents available, the NFPA is not undertaking to render professional or other
services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any
person or entity to someone else. Anyone using this document should rely on his or her own independent judgment
or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any
given circumstances.
The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA
Documents. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with
this document. Any certification or other statement of compliance with the requirements of this document shall not
be attributable to the NFPA and is solely the responsibility of the certifier or maker of the statement.
IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS
Patents
The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an
NFPA Document. The users of NFPA Documents bear the sole responsibility for determining the validity of any such patent rights, as well as the risk
of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA
Documents.
NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding the inclusion of patents in American National
Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy:
NOTICE: The user’s attention is called to the possibility that compliance with an NFPA Document may require use of an invention covered by
patent rights. NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essential
patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has filed a statement of willingness to
grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of
such filed statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below.
Copyrights
NFPA Documents are copyrighted by the NFPA. They are made available for a wide variety of both public and private uses. These include both
use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By
making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to
these documents.
Use of NFPA Documents for regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference”
means the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be
noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested
to notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of
NFPA Documents, contact NFPA at the address below.
For more information about NFPA, visit the NFPA website at www.nfpa.org.
£
£
Æ
£
6/08-A
FOR OFFICE USE ONLY
For further information on the standards-making process, please contact the Codes
and Standards Administration at 617-984-7249 or visit www.nfpa.org/codes. Log #:
For technical assistance, please call NFPA at 1-800-344-3555. Date Rec’d:
Please indicate in which format you wish to receive your ROP/ROC electronic paper download
(Note: If choosing the download option, you must view the ROP/ROC from our website; no copy will be sent to you.)
2. Proposal Recommends (check one): new text revised text deleted text
3. Proposal (include proposed new or revised wording, or identification of wording to be deleted): [Note: Proposed text should
be in legislative format; i.e., use underscore to denote wording to be inserted (inserted wording) and strike-through to denote wording to
be deleted (deleted wording).]
4. Statement of Problem and Substantiation for Proposal: (Note: State the problem that would be resolved by your
recommendation; give the specific reason for your Proposal, including copies of tests, research papers, fire experience, etc. If more
than 200 words, it may be abstracted for publication.)
5. Copyright Assignment
(a) I am the author of the text or other material (such as illustrations, graphs) proposed in the Proposal.
(b) Some or all of the text or other material proposed in this Proposal was not authored by me. Its source is as
follows: (please identify which material and provide complete information on its source)
ABC Co.
I hereby grant and assign to the NFPA all and full rights in copyright in this Proposal and understand that I acquire no rights in any publication of NFPA
in which this Proposal in this or another similar or analogous form is used. Except to the extent that I do not have authority to make an assignment in
materials that I have identified in (b) above, I hereby warrant that I am the author of this Proposal and that I have full power and authority to enter into
this assignment.
Signature (Required)
Please indicate in which format you wish to receive your ROP/ROC electronic paper download
(Note: If choosing the download option, you must view the ROP/ROC from our website; no copy will be sent to you.)
2. Proposal Recommends (check one): new text revised text deleted text
3. Proposal (include proposed new or revised wording, or identification of wording to be deleted): [Note: Proposed text should
be in legislative format; i.e., use underscore to denote wording to be inserted (inserted wording) and strike-through to denote wording to
be deleted (deleted wording).]
4. Statement of Problem and Substantiation for Proposal: (Note: State the problem that would be resolved by your
recommendation; give the specific reason for your Proposal, including copies of tests, research papers, fire experience, etc. If more
than 200 words, it may be abstracted for publication.)
5. Copyright Assignment
(a) I am the author of the text or other material (such as illustrations, graphs) proposed in the Proposal.
(b) Some or all of the text or other material proposed in this Proposal was not authored by me. Its source is as
follows: (please identify which material and provide complete information on its source)
I hereby grant and assign to the NFPA all and full rights in copyright in this Proposal and understand that I acquire no rights in any publication of NFPA
in which this Proposal in this or another similar or analogous form is used. Except to the extent that I do not have authority to make an assignment in
materials that I have identified in (b) above, I hereby warrant that I am the author of this Proposal and that I have full power and authority to enter into
this assignment.
Signature (Required)