Scribd
Upload
10 views

Thecodeyouhavetherighttoget

Uploaded by

Harshit's Lab
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
10 views

Thecodeyouhavetherighttoget

Uploaded by

Harshit's Lab
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

#include <LiquidCrystal_I2C.

h>
#include "DHT.h"
#define DHTPIN 13
#define DHTTYPE DHT11

LiquidCrystal_I2C lcd(0x27, 16, 2); // I2C address 0x27 (from DIYables LCD), 16
column and 2 rows
DHT dht(DHTPIN, DHTTYPE);

void setup()
{
dht.begin(); // initialize the sensor
lcd.init(); // initialize the lcd
lcd.backlight(); // open the backlight
}

void loop()
{
delay(2000); // wait a few seconds between measurements

float humi = dht.readHumidity(); // read humidity


float tempC = dht.readTemperature(); // read temperature

lcd.clear();
// check if any reads failed
if (isnan(humi) || isnan(tempC)) {
lcd.setCursor(0, 0);
lcd.print("Failed");
} else {
lcd.setCursor(0, 0); // start to print at the first row
lcd.print("Temp: ");
lcd.print(tempC); // print the temperature
lcd.print((char)223); // print ° character
lcd.print("C");

lcd.setCursor(0, 1); // start to print at the second row


lcd.print("Humi: ");
lcd.print(humi); // print the humidity
lcd.print("%");
}
}

You might also like