Scribd
Upload
7 views

Ctse2014 Eeds

Uploaded by

lich0312
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
7 views

Ctse2014 Eeds

Uploaded by

lich0312
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

ASSOC.

PIP:
External Coating Systems PIP CTSE2014
CTSE2000

Inorganic Zinc/Heat Cured Silicone (2 Coats) PAGE 1 OF 2


IZ/HS/HS February 2001

Project: System Reference No.: Date:

Description:
Two-coat silicone paint system (HS) applied over inorganic zinc primer (IZ).

Surfaces:
Carbon Steel. Do not apply to stainless steel or nickel alloy surfaces.

Surface Preparation: Abrasive blast to SSPC SP-10 with a nominal profile of 2 mils.

SYSTEM
Coat Type Application Minimum Maximum Shop (S)/
No. Code Generic Type Method DFT, mils DFT, mils Field (F)
1. IZ Inorganic Zinc S 2.5 4
2. HS Heat Cured Silicone S 1.5 2
3. HS Heat Cured Silicone S 1.5 2
Total: 5.5 8
*Application Method: S=Spray; B=Brush; R=Roller
Notes:
Unless otherwise specified, refer to the coating manufacturer’s data sheets for information on the recommended
application temperature range, wet film thickness, approximate coverage in square feet/gallon, pot life, and drying times to
touch, handle, and cure for each coating product.

Mixing and Thinning: Mix according to manufacturer’s instructions and SSPC PA-1.

Application: Apply according to manufacturer’s instructions and PIP CTSE1000.

Job Stencil Required: Yes No


Repair:
ASSOC. PIP:
External Coating Systems PIP CTSE2014
CTSE2000
Inorganic Zinc/Heat Cured Silicone (2 Coats) PAGE 2 OF 2
IZ/HS/HS February 2001

Project: System Reference No.: Date:

Coat 1 Coat 2 Coat 3


Manufacturer
Inorganic Zinc Heat Cured Silicone Heat Cured Silicone

Notes:

You might also like