Scribd
Upload
104 views2 pages

Seattle Pap Bubble CPAP

Uploaded by

Falken Efron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
104 views2 pages

Seattle Pap Bubble CPAP

Uploaded by

Falken Efron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Spesifikasi Draeger Seattle PAP (Bubble CPAP)

Oxymixer
Main flow outlet 0 – 16 l/min
Secondary flow outlet with bleed 0 – 3 l/min
Bleed flow ≤ 3 l/min at 3.4 bar (49.3 psi)
Maximum combined flow (all outlets) ≥ 30 l/min
Emergency flow (in the event of the air or oxygen supply failing) >15 l/min
Alarm signal in the event of loss of supply pressure Alarm on when the pressure difference of both gases is
0.9 – 1.8 bar (13 – 26.1 psi).
Alarm volume ≥80 dB ata distance of 30 cm
Adjustment range of oxygen concentration 21 – 100%
Gas supply pressure 3.2 – 6.5 bar (46.4 – 94.3 psi) air and oxygen with max. 0.7 bar
(10.1 psi) pressure difference between the two
Accuracy of the gas mixture (FIO2) ± 3 % oxygen
Connection types DISS outlets for gas mixture and NIST inlets for air and oxygen
Dimensions LxWxH 13 x 16.5 x 12.2 cm (5.1 x 6.5 x 4.8 inch)
Weight approx 1,600 g
Operating temperature +5 °C to +50 °C (41 to 122 °F)

Seattle PAP
Length of breathing hoses 1.8 m (70.86 in), including 40 cm
(15.74 in) hose extension
Material
Breathing hoses PP, EVA, ABS
Humidifier chamber PC, SBC, silicone, aluminum
Connector PP
Pressure relief valve PC, PE,PP, stainless steel
Bubble CPAP chamber PP, POM
O2 hose PVC (DEHP free)

Performance characteristics
Insp. resistance at 15 L/min <2 mbar* (or hPa or cmH2O)
Compliance at 60 mbar <1 mL/hPa (or mL/mbar)
Leakage at 60 mbar <50 mL/min
Electrical connection data 22 Ohm

Humidifier chamber (N)


Humidifier output at 4 to 12 L/min >10 mg/L
Volume (air) of humidifier chamber with water/without water 190/300 mL
Warm-up time 30 min
Ambient conditions
During storage
Temperature –20 to 60 °C (–4 to 140 °F)
Relative humidity 5 to 95 % (non-condensing)
500 to 1200 hPa (7.3 to 17.4 psi)
FEATURES BENEFITS
Terdapat pengunci pada pengaturan PEEP
Desain Chamber Bubble 135 derajat sehingga menghindari pasien lelah
bernafas
Efek Bubble dan sirkuit menghantarkan frekuensi seperti terapi HFO
Open System Circuit (sirkuit bubble cpap yang dapat digunakan pada merk lain)
e of both gases is

xygen with max. 0.7 bar


the two

nlets for air and oxygen


h)

EEP
hingga menghindari pasien lelah

n frekuensi seperti terapi HFO


ap yang dapat digunakan pada merk lain)

You might also like