MINI.

Wl TECHNICAL SPECIFICATIONS INSTALLATION

A Warnings:
Wiring of 2gang switch:

Wifi Switch Module Model

1. lnstallation must be carried out by a qualified
electrician in accordance with local regulations.
2. Keep the device out of reach of children. L1

3. Keep the device away Írom water, damp or hot 12

environment. L-in

4. lnstall the device away from strong signal sources N-in

such as microwave oven that may cause signal o S2

interruption resulted to abnormal operation of the
device.
o S1

5. Obstruction by concrete wall or metallic

materials may reduce the eÍÍective operation 2Gang Without Switch
range oÍ the device and should be avoided.

oooooo 41mm
6. Do NOT attempt to disassemble,repair or modiÍy
the device.
mains

Wiring lnstructions and Diagrams

'1.Turn ofÍ the power supply before carrying out any
User Nilanual
L1

N § electrical installation work. L2

N
3 3 2.Connect wires according to the wiring diagram. L-in

ffi 3 3
3.lnsert the module into the junction box. N-in

4.Turn on the power supply and follow switch module S2

confi gu ration instructions. S1

FE C€ X Notes: Take your smartphone close to the switch

module when you're configuring, and make
sure you have min. 50% Wi-Fi signal. 2Gang lway Switch

matns
Wiring of 4gang Switch:
matns lmains
L1 L1

L2 L2

L-in L3 L1 L1

N-in L2
L2
S2 L-in
L3 L3
S1
N-in L4
L4
L-in
L-in
N-in
N-in
2Gang 2way Switch
3gang lway Switch

Wiring of 3gang switch 4gang without Switch

4gang 2way Switch

L1 S1 L1
S2
S3 _a+_ L1

_a-
L2 L2
COM L2

-a-
_a-
L3 L3
L3

o L4
L-in

N-in
-a- L-in

N-in
L-in

N-in

3gang without Switch 3gang 2way Switch 4gang lway Switch

I
 APP USER N/ANUAL Reset key c------1 O

's#
-o
e Register ;§.' sunny
ii'C tÁcetk.x Gcod

Region

AiL Devicej

...

'.:':.:-:,::.,::.j,:;;

..,l.{,,iirür;*

.ÊíiNlSfl

IOS APP i Android APP

o o l'io deJicoÍ

ffi
o @
Scan the QR code to download Tuya Smart App, Log in or register your account with your mobile After the wiring oÍ switch module is done, press
or you can also search keyword "Tuya Smart" number or e-mail address.Type in the veriÍication the reset key for about 10 seconds or turn on/off l,Support multi-protocol matching : WlFl/Bluetooth.
and "Smart Life' at App Store or Googleplay to code sent to your mobile or mail box, then set your the traditional switch for 5 times until the indicator Z,Turn on Bluetooth, Click "+'i , Íollow the on-screen
download App. login password. Click "Create Family" to enter into light inside the module is flashing quickly for pairing. instruction for paring.
the APP.

FAQ
Q1 : What should I do if I can' t configure the switch
module?
a. Please check whether device is powered on.
-o -o b. Make sure and switch module
Found 1 devices.Added 0 APP are
successfully
c. Whether it' s in good internet conditions.
Found 1 devices.Added 1
; 4 Gang WIFI #. d. Make sure the password entered in App is correct.
" successfully
Switch'Module ffi

4 Gang WlFl
ffi
\ e. lVake sure the wiring is correct.

Q2: What device can be connected to this Wi-Fi switch

module?
[t/lost oÍ your household electrical appliances can be,
Voice control such as lamps, laundry machine, coffe maker, etc.

Q3: What happens iÍ the WlFl goes off?

--+ You can still control the device connected the switch
module with
active again

o connect automatically to your WlFl network.

Q4: What should I do if I change the WlFl network or

o w @ Enjoy your smart life of home automation for

lighting control by using our All-in-one mobile
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Finetwork accordingly as per the App User Manual.
Finally, you can control the device via your app wherever you are in the world or simply by
The connecting will take about 10-120 seconds to mobile phone. voice controlwhen you are sitting at home Q5: How do I reset the device?
complete depending on your network condition. comfoftably. Power on/oÍÍ device for 5 times until the indicator light
flash.