Scribd
Upload
5 views

CLE Spec Sheet

Uploaded by

ECO Green and Blue
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

CLE Spec Sheet

Uploaded by

ECO Green and Blue
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CLE

COOLANT HEATING SYSTEM


HOTSTART’s CLE is a complete coolant heating system for
North American oil and gas applications. The CLE heats
engines up to 1000L (50,000CID) and is designed to maintain
engine temperature above 120°F (50°C) in ambient down
to -40°F (-40°C). The packaged heating system consists of
a heater, pump/motor, high limit temperature controller,
adjustable temperature setting, control box with manual and
automatic operation. The CLE provides uniform heating to all
locations in the engine, enhancing availability and decreasing
wear and tear from cold startups.

APPLICATION
Hazardous Location applications, such as gas compression and off shore.
System Area Classification: Class 1 Div. 1&2 Group D

SPECIFICATIONS
• Heating Fluid: Engine coolant • Pump Power: 1 Hp (0.75 kW)
• Heat Power: 6-36 kW • Maximum Pressure: 100 psi (690 kPa)
• Voltage Range: 240, 440-480, 575-600V • Pressure Relief Valve Setting: 90 psi (620 kPa)
• Temperature Controller: Adjustable 32-212°F (0-100°C) • Inlet Plumbing: 1.25” NPT
• Temperature Setting: 120°F (50°C) • Outlet Plumbing: 1.0“ NPT
• High Limit Temperature Control: Adj. 32-212°F (0-100°C) • Main Control Box Ingress Protection: NEMA Type 4
• High Limit Temperature Setting: 195°F (90°C) • Motor Ingress Protection: XPFC
• Fluid Capacity: 1 gal (3.8L) • Temperature Class: T2C
• Altitude Rating (Motor): 3,300 ft (1,000m)

Dimensions & Weight


Length (L) Width (W) Depth (D) Weight
43.0” 23.0” 13.1” 306 lbs.
1092mm 584mm 333mm 136 kg

FEATURES
• Certification: CSA
• Switch: Local/Off/Remote
• Remote On/Off Signal: 24VDC
• Compact design
• Easy to install
• Failsafe Operation

www.hotstart.com

You might also like