1.

Conduct an experiment of p-n junction diode under forward bias and

reverse bias and draw the V-I characteristics.

2. Conduct an experiment of zener diode, draw the V-I characteristics under

reverse bias and forward bias condition. Mention zener breakdown voltage.

3. Conduct an experiment of Half wave rectifier with and without filter and

calculate Ripple factor, Efficiency and voltage regulation.

4. Conduct an experiment of Full wave rectifier with and without filter and

calculate Ripple factor and Efficiency and voltage regulation.

5. Conduct an experiment for input and output characteristics of Common base

configuration.

6. Conduct an experiment for frequency response of common emitter amplifier.

1. Conduct an experiment of p-n junction diode under forward bias and

reverse bias and draw the V-I characteristics.

2. Conduct an experiment of zener diode, draw the V-I characteristics under

reverse bias and forward bias condition. Mention zener breakdown

voltage.

3. Conduct an experiment of Half wave rectifier with and without filter and

calculate Ripple factor, Efficiency and voltage regulation.

4. Conduct an experiment of Full wave rectifier with and without filter and

calculate Ripple factor and Efficiency and voltage regulation.

1. Conduct an experiment of p-n junction diode under forward bias and

reverse bias and draw the V-I characteristics.

2. Conduct an experiment of zener diode, draw the V-I characteristics under

reverse bias and forward bias condition. Mention zener breakdown

voltage.
 3. Conduct an experiment of Half wave rectifier with and without filter

and calculate Ripple factor, Efficiency and voltage regulation.

4. Conduct an experiment of Full wave rectifier with and without filter

and calculate Ripple factor and Efficiency and voltage regulation.

1. Conduct an experiment of p-n junction diode under forward bias

and reverse bias and draw the V-I characteristics.

2. Conduct an experiment of zener diode, draw the V-I characteristics

under reverse bias and forward bias condition. Mention zener

breakdown voltage.

3. Conduct an experiment of Half wave rectifier with and without filter and

calculate Ripple factor, Efficiency and voltage regulation.

4. Conduct an experiment of Full wave rectifier with and without

filter and calculate Ripple factor and Efficiency and voltage

regulation.
1. Conduct an experiment of p-n junction diode under

forward bias and reverse bias and draw the V-I

characteristics.

2. Conduct an experiment of zener diode, draw the V-I

characteristics under reverse bias and forward bias condition.

Mention zener breakdown voltage.

3. Conduct an experiment of Half wave rectifier with and without

filter and calculate Ripple factor, Efficiency and voltage

regulation.

4. Conduct an experiment of Full wave rectifier with and without

filter and calculate Ripple factor and Efficiency and voltage

regulation.
 1. Conduct an experiment of p-n junction diode under

forward bias and reverse bias and draw the V-I

characteristics.

2. Conduct an experiment of zener diode, draw the V-I

characteristics under reverse bias and forward bias

condition. Mention zener breakdown voltage.

3. Conduct an experiment of Half wave rectifier with and

without filter and calculate Ripple factor, Efficiency and voltage

regulation.

4. Conduct an experiment of Full wave rectifier with and without filter

and calculate Ripple factor and Efficiency and voltage regulation.

1. Conduct an experiment of p-n junction diode under forward bias and

reverse bias and draw the V-I characteristics.

2. Conduct an experiment of zener diode, draw the V-I

characteristics under reverse bias and forward bias

condition. Mention zener breakdown voltage.

3. Conduct an experiment of Half wave rectifier with and

without filter and calculate Ripple factor, Efficiency and

voltage regulation.

4. Conduct an experiment of Full wave rectifier with and

without filter and calculate Ripple factor and Efficiency

and voltage regulation.

1. Conduct an experiment of p-n junction diode

under forward bias and reverse bias and draw the

V-I characteristics.

2. Conduct an experiment of zener diode, draw the V-I

characteristics under reverse bias and forward bias

condition. Mention zener breakdown voltage.

3. Conduct an experiment of Half wave rectifier with

and without filter and calculate Ripple factor,

Efficiency and voltage regulation.

1. Conduct an experiment of p-n junction diode

under forward bias and reverse bias and draw

the V-I characteristics.

2. Conduct an experiment of zener diode, draw the

V-I characteristics under reverse bias and forward

bias condition. Mention zener breakdown voltage.

3. Conduct an experiment of Half wave rectifier with

and without filter and calculate Ripple factor,

Efficiency and voltage regulation.

4. Conduct an experiment of Full wave rectifier with

and without filter and calculate Ripple factor and

Efficiency and voltage regulation.

1. Conduct an experiment of p-n junction

diode under forward bias and reverse bias

and draw the V-I characteristics.

2. Conduct an experiment of zener diode, draw the

V-I characteristics under reverse bias and

forward bias condition. Mention zener

breakdown voltage.

3. Conduct an experiment of Half wave rectifier

with and without filter and calculate Ripple

factor, Efficiency and voltage regulation.

4. Conduct an experiment of Full wave rectifier

with and without filter and calculate Ripple

factor and Efficiency and voltage regulation.

1. Conduct an experiment of p-n junction

diode under forward bias and reverse

bias and draw the V-I characteristics.

2. Conduct an experiment of zener diode, draw

the V-I characteristics under reverse bias

and forward bias condition. Mention zener

breakdown voltage.

3. Conduct an experiment of Half wave

rectifier with and without filter and calculate

Ripple factor, Efficiency and voltage

regulation.
4. Conduct an experiment of Full wave

rectifier with and without filter and calculate

Ripple factor and Efficiency and voltage

regulation.

1. Conduct an experiment of p-n

junction diode under forward bias

and reverse bias and draw the V-I

characteristics.

2. Conduct an experiment of zener diode,

draw the V-I characteristics under

reverse bias and forward bias condition.

Mention zener breakdown voltage.

3. Conduct an experiment of Full wave

rectifier with and without filter and

calculate Ripple factor, Efficiency and

voltage regulation.
4. Conduct an experiment of half wave

rectifier with and without filter and

calculate Ripple factor and Efficiency

and voltage regulation.

1. Conduct an experiment of p-n

junction diode under forward

bias and reverse bias and draw

the V-I characteristics.

2. Conduct an experiment of zener

diode, draw the V-I characteristics

under reverse bias and forward bias

condition. Mention zener breakdown

voltage.

3. Conduct an experiment of Half wave

rectifier with and without filter and

 calculate Ripple factor, Efficiency and

voltage regulation.

4. Conduct an experiment of Full wave

rectifier with and without filter and

calculate Ripple factor and Efficiency

and voltage regulation.

1. Conduct an experiment of p-n

junction diode under forward

bias and reverse bias and

draw the V-I characteristics.

2. Conduct an experiment of zener

diode, draw the V-I characteristics

under reverse bias and forward

bias condition. Mention zener

breakdown voltage.
3. Conduct an experiment of Half

wave rectifier with and without

filter and calculate Ripple factor,

Efficiency and voltage regulation.

4. Conduct an experiment of Full

wave rectifier with and without

filter and calculate Ripple factor

and Efficiency and voltage

regulation.

1. Conduct an experiment of

p-n junction diode under

forward bias and reverse

bias and draw the V-I

characteristics.

2. Conduct an experiment of zener

diode, draw the V-I

characteristics under reverse

 bias and forward bias

condition. Mention zener

breakdown voltage.

3. Conduct an experiment of Half

wave rectifier with and without

filter and calculate Ripple

factor, Efficiency and voltage

regulation.

4. Conduct an experiment of Full

wave rectifier with and without

filter and calculate Ripple

factor and Efficiency and

voltage regulation.

1. Conduct an experiment

of p-n junction diode

under forward bias and

 reverse bias and draw

the V-I characteristics.

2. Conduct an experiment of

zener diode, draw the V-I

characteristics under reverse

bias and forward bias

condition. Mention zener

breakdown voltage.

3. Conduct an experiment of

Half wave rectifier with and

without filter and calculate

Ripple factor, Efficiency

and voltage regulation.

4. Conduct an experiment of

Full wave rectifier with and

without filter and calculate

 Ripple factor and Efficiency

and voltage regulation.

5. Conduct an experiment for

input and output

characteristics of Common

base configuration.

6. Conduct an experiment for

input and output

characteristics of Common

base configuration.

7. Conduct an experiment for

frequency response of

common emitter amplifier.

8. Conduct an experiment for

frequency response of

common emitter amplifier.