Scribd
Upload
35 views

Polyester ISO Tds Web

Uploaded by

Muhammad Usama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Polyester ISO Tds Web

Uploaded by

Muhammad Usama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Polyester ISO Laminating Resin - Unwaxed

Description Laminating ISO Resin is an isophthalic based polyester resin, showing


exceptional physical and mechanical properties. Suited for marine and
chemical resistance applications.

Uses Water and chemical applications; including boats, yachts, fuel and chemical
tanks. This resin is ideal where high performance properties are required.

Advantages Low shrinkage.


Corrosion and chemical resistance
High heat resistance
DNV approval

Typical Liquid Properties Property Unit Spec Remarks


Specific Gravity - 1.00-1.10 Sheen Cup
Viscosity cps 1500-2000 #2, 12rpm
Thix Index - 2.5-3.5 #3, 6/60rpm
Acid Value Mg KOH/g 14-22 -
Volatile Content % 40-49 -
Gel Time min 25-35 MEKP Butanox
M50 2% @
Gel Time Peak min 45-55 25⁰c
Peak Temperature C⁰ 140-160

Instructions for Use Mix well before use. Consult safety data sheet before use. Use in a well-
ventilated area. Resin and catalyst should be mixed at a ratio of 2% by
volume or weight. Recommended catalyst is Curox M200 or Butanox M50.
Catalyst additions are critical to curing rates, do alter from recommended
levels. Resin can be cleaned up off equipment or flooring using Acetone or
mineral solvent.

Storage and Shelf Life Store in a cool, dry area, away from sources of ignition, increased heat or
sunlight. Store in original container sealed. Shelf life if stored correctly up to 9
months.

Notes Resins are affected by temperature. Choose conditions between 18-25⁰C.


Use a measuring device or syringe to weigh out catalyst, correct levels are
essential to resin cure.
All information provided in this bulletin is to be used as a guide only, individual
tests should be conducted to determine if this product is suitable for your
application.

Disclaimer
This information and all further technical advice are reflecting our present knowledge and experience based on internal tests with local raw materials with the purpose to inform about our products and applications. The information should
not be construed as guaranteeing specific properties of products described or their suitability for a particular application, nor as providing complete instructions for use. The information implies no guarantee for product and shelf life properties,
nor any liability or other legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. We reserve the right to make any changes according to technological progress or further
developments. Application and usage of our products based on our technical advice is out of our control and sole responsibility of the user. The user is not released from the obligation to conduct careful inspection and testing of incoming
goods in order to verify the suitability for the intended application.
Issue Date: 15.05.2017

You might also like