Scribd
Upload
28 views

.PDF 7

Uploaded by

Izal Dwiyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

.PDF 7

Uploaded by

Izal Dwiyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AX-MDM Module

The AX-MDM, 24 VDC Modem Module, provides remote


telephone dial-in access to an Axis AX Series Intelligent Fire
Alarm Control Panel, so qualified and trained Advanced fire
alarm technicians can monitor, maintain and perform service
requirements of various Axis AX Series installations. The remote
access to the Axis AX Series Intelligent Fire Alarm Control Panel
is accomplished with the Advanced Axis AX terminal dial-up
(Virtual Terminal Software).

The AX-MDM can be mounted either inside the Axis AX Series


Intelligent Fire Alarm Control Panel enclosure or mounted in its
own enclosure located adjacent to the Axis AX Series Intelligent
Fire Alarm Control Panel.

Features
Remote Dial-Up Access to Axis AX Series Panels
Operates on 24 VDC with Battery Backup
Permits use of Axis AX Virtual Terminal Software
Mounts within Axis AX FACP or Remotely

Listings and Approvals


ETL ANSI/UL 864 Listed: 3118002NYM-001B
CSFM Approved: 7165-1713:0101
NYCFD COA #6080

Specification
Operating Voltage 15-30 VDC (From base card or Listed power supply)
Operating Current 100 mA
Environment Indoor, Dry
Operating Temperature 32-120° F (0-48° C)
Humidity 10-95% (Non-condensing)
Weight (AX-MDM) 3 oz
Optional Enclosure Dimension 8.58” x 11.81” x 1.77”

Version [1.00] Page 1 of 2


www.advancedco.com

Wiring Diagrams

Order Codes and Options


AX-MDM 24 Volt DC, Modem Module
AXM-009* Optional Listed Enclosure

*For gray enclosure, add the suffix “G” to the part number.

Check if this document is up to date | Give us feedback

Advanced, The Bridges, Balliol Business Park, Newcastle upon Tyne, NE12 8EW, UK T: +44 (0)345 894 7000, E: [email protected],
W: www.advancedco.com
As our policy is one of constant product improvement the right is therefore reserved to modify product specifications without prior notice.

Version [1.00] Page 2 of 2

You might also like