1

VISVESVARAYA TECHNOLOGICAL UNIVERSITY,

BELAGAVI

3rd to 8th Semester BE –

B.E. in CSE(Data Science) (CD)
Scheme of Teaching and Examinations
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(2018 scheme Effective from the academic year 2020-21)

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 2
VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI
B.E. in CSE(Data Science) (CD)
Scheme of Teaching and Examinations
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(2018 scheme Effective from the academic year 2020-21)
III SEMESTER
Teaching Hours /Week Examination

Department

Practical/
Drawing

Total Marks
Tutorial
Teaching

Lecture

SEE Marks
Duration in

CIE Marks
Theory

Credits
Sl. Course and

hours
Course Title
No Course Code

L T P
Transform Calculus,
1 Fourier Series And Mathematic --
BSC 18MAT31 2 2 03 40 60 100 3
Numerical s
Techniques
2 PCC Data Structures and CS / IS / AI / -- 40 60 100 4
18CS32 AD 3 2 03
Applications
3 PCC Analog and Digital CS / IS / AI / -- 40 60 100 3
18CS33 AD 3 0 03
Electronics
4 PCC Computer CS / IS / AI / -- 40 60 100 3
18CS34 AD 3 0 03
Organization
5 PCC Software Engineering CS / IS / AI / -- 40 60 100 3
18CS35 AD 3 0 03
6 PCC Discrete CS / IS / AI / 40 60 100 3
AD
18CS36 Mathematical 3 0 -- 03
Structures
7 PCC Analog and Digital CS / IS / AI / -- 2 2 40 60 100 2
AD
18CSL37 Electronics 03
Laboratory
8 PCC Data Structures CS / IS / AI / -- 2 2 40 60 100 2
18CSL38 AD 03
Laboratory
18KVK39 Balake Kannada
(Kannada for
communication)/
-- 2 -- -- 100 --
18KAK39 Samskrutika
Kannada (Kannada
9 HSMC HSMC 100 1
for Administration)
OR OR
Constitution of India, 1 -- -- 02 40 60
18CPC39 Professional Ethics
Examination is by objective type questions
and Cyber Law
17 10 24 420 480
TOTAL OR OR 04 OR OR OR 900 24
18 08 27 360 540

Note: BSC: Basic Science, PCC: Professional Core, HSMC: Humanity and Social Science, NCMC: Non-credit mandatory course
18KVK39Vyavaharika Kannada (Kannada for communication) is for non-Kannada speaking, reading and writing students and
18KAK39Aadalitha Kannada (Kannada for Administration) is for students who speak, read and write Kannada.

Course prescribed to lateral entry Diploma holders admitted to III semester of Engineering programs
Additional Mathematic
10 NCMC 18MATDIP31 02 01 -- 03 40 60 100 0
Mathematics - I s
(a)The mandatory non – credit courses Additional Mathematics I and II prescribed for III and IV semesters respectively, to the lateral
entry Diploma holders admitted to III semester of BE/B.Tech programs, shall attend the classes during the respective semesters to
complete all the formalities of the course and appear for the University examination. In case, any student fails to register for the said
course/ fails to secure the minimum 40 % of the prescribed CIE marks, he/she shall be deemed to have secured F grade. In such a case,
the student have to fulfil the requirements during subsequent semester/s to appear for SEE.
(b) These Courses shall not be considered for vertical progression, but completion of the courses shall be mandatory for the award of
degree
Courses prescribed to lateral entry B. Sc degree holders admitted to III semester of Engineering programs
Lateral entrant students from B.Sc. Stream, shall clear the non-credit courses Engineering Graphics and Elements of Civil Engineering
and Mechanics of the First Year Engineering Programme. These Courses shall not be considered for vertical progression, but
completion of the courses shall be mandatory for the award of degree.

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 3

AICTE Activity Points to be earned by students admitted to BE/B.Tech/B. Plan day college programme (For more details refer
to Chapter 6,AICTE Activity Point Programme, Model Internship Guidelines): Over and above the academic grades, every Day
College regular student admitted to the 4 years Degree programme and every student entering 4 years Degree programme through
lateral entry, shall earn 100 and 75 Activity Points respectively for the award of degree through AICTE Activity Point Programme.
Students transferred from other Universities to fifth semester are required to earn 50 Activity Points from the year of entry to VTU.
The Activity Points earned shall be reflected on the student’s eighth semester Grade Card. The activities can be spread over the years,
anytime during the semester weekends and holidays, as per the liking and convenience of the student from the year of entry to the
programme. However, minimum hours’ requirement should be fulfilled. Activity Points (non-credit) have no effect on SGPA/CGPA
and shall not be considered for vertical progression. In case students fail to earn the prescribed activity Points, eighth semester Grade
Card shall be issued only after earning the required activity Points. Students shall be admitted for the award of degree only after the
release of the eighth semester grade card.

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in CSE(Data Science) (CD)
Scheme of Teaching and Examinations
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(2018 scheme Effective from the academic year 2020-21)
IV SEMESTER
Teaching Hours /Week Examination
Department

Practical/
Drawing

Total Marks
Tutorial
Teaching

Lecture

SEE Marks
Duration in

CIE Marks
Theory

Credits
Sl. Course and

hours
Course Title
No Course Code

L T P
Complex Analysis,
Mathematic
1 BSC 18MAT41 Probability And Statistical 2 2 -- 03 40 60 100 3
s
Methods
2 PCC Design and Analysis of CS / IS / AI / -- 40 60 100 4
18CS42 AD 3 2 03
Algorithms
3 PCC Operating Systems CS / IS / AI / -- 40 60 100 3
18CS43 AD 3 0 03
4 PCC Microcontroller and CS / IS / AI / -- 40 60 100 3
18SC44 AD 3 0 03
Embedded Systems
5 PCC Object Oriented Concepts CS / IS / AI / -- 40 60 100 3
18CS45 AD 3 0 03
6 PCC Data Communication CS / IS / AI / 40 60 100 3
18CS46 AD 3 0 -- 03
7 PCC Design and Analysis of CS / IS / AI / -- 2 2 40 60 100 2
18CSL47 AD 03
Algorithm Laboratory
8 PCC Microcontroller and CS / IS / AI / -- 2 2 40 60 100 2
AD
18CSL48 Embedded Systems 03
Laboratory
18KVK49 Vyavaharika Kannada
(Kannada for
communication)/
-- 2 -- -- 100 --
18KAK49 Aadalitha Kannada
(Kannada for
9 HSMC HSMC 100 1
Administration)
OR OR
Constitution of India, 1 -- -- 02 40 60
18CPH49 Professional Ethics and
Examination is by objective type questions
Cyber Law
17 10 24 420 480
TOTAL OR OR 04 OR OR OR 900 24
18 08 27 360 540

Note: BSC: Basic Science, PCC: Professional Core, HSMC: Humanity and Social Science, NCMC: Non-credit mandatory course
18KVK49Vyavaharika Kannada (Kannada for communication) is for non-Kannada speaking, reading and writing students and
18KAK49Aadalitha Kannada (Kannada for Administration) is for students who speak, read and write Kannada.

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 4

Course prescribed to lateral entry Diploma holders admitted to III semester of Engineering programs
Additional Mathematic
10 NCMC 18MATDIP41 02 01 -- 03 40 60 100 0
Mathematics - II s
(a)The mandatory non – credit courses Additional Mathematics I and II prescribed for III and IV semesters respectively, to the lateral entry
Diploma holders admitted to III semester of BE/B.Tech programs, shall attend the classes during the respective semesters to complete all the
formalities of the course and appear for the University examination. In case, any student fails to register for the said course/ fails to secure the
minimum 40 % of the prescribed CIE marks, he/she shall be deemed to have secured F grade. In such a case, the student has to fulfil the
requirements during subsequent semester/s to appear for SEE.
(b) These Courses shall not be considered for vertical progression, but completion of the courses shall be mandatory for the award of degree
Courses prescribed to lateral entry B. Sc degree holders admitted to III semester of Engineering programs
Lateral entrant students from B.Sc. Stream, shall clear the non-credit courses Engineering Graphics and Elements of Civil Engineering and
Mechanics of the First Year Engineering Programme. These Courses shall not be considered for vertical progression, but completion of the
courses shall be mandatory for the award of degree.

AICTE activity Points: In case students fail to earn the prescribed activity Points, eighth semester Grade Card shall be issued only after
earning the required activity Points. Students shall be admitted for the award of degree only after the release of the Eighth semester Grade
Card.

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in CSE(Data Science) (CD)
Scheme of Teaching and Examinations
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(2018 scheme Effective from the academic year 2020-21)
V SEMESTER
Teaching Hours
Examination
/Week
Department
Teaching

Practical/

Credits
Drawing

Total Marks
Tutorial
Lecture

SEE Marks
Duration in

CIE Marks
Theory

Sl. Course and

Course Title

hours
No Course code

L T P
1 Management and
HSMC 18CS51 Entrepreneurship for IT HSMC 2 2 -- 03 40 60 100 3
Industry
2 PCC 18AI52 Python Programming CS / IS / AI / AD 3 2 -- 03 40 60 100 4
3 PCC 18CS53 Database Management CS / IS / AI / AD -- 40 60 100
3 2 03 4
Systems
4 PCC 18CS54 Automata Theory and CS / IS / AI / AD -- -- 40 60 100 3
3 03
Computability
5 PCC 18AI55 Principles of Artificial CS / IS / AI / AD -- -- 40 60 100 3
3 03
Intelligence
6 PCC 18AD56 Mathematics for Data CS / IS / AD -- 40 60 100 3
3 -- 03
Science
7 PCC 18AIL57 Artificial Intelligence CS / IS / AI / AD -- 2 2 40 60 100 2
03
Laboratory
8 PCC DBMS Laboratory with CS / IS / AI / AD -- 2 2 40 60 100 2
18CSL58 03
mini project
Civil/
Environmenta
9 l
HSMC 18CIV59 Environmental Studies [Paper setting: 1 -- -- 02 40 60 100 1
Civil
Engineering
Board]
TOTAL 18 10 4 26 360 540 900 25

Note: PCC: Professional Core, HSMC: Humanity and Social Science.

AICTE activity Points: In case students fail to earn the prescribed activity Points, eighth semester Grade Card shall be issued only after
earning the required activity Points. Students shall be admitted for the award of degree only after the release of the Eighth semester Grade
Card.

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 5

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in CSE(Data Science) (CD)
Scheme of Teaching and Examinations
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(2018 scheme Effective from the academic year 2020-21)
VI SEMESTER
Teaching Hours /Week Examination

Department

Practical/
Drawing

Total Marks
Tutorial
Teaching

CIE Marks
Lecture

SEE Marks
Duration in
Theory

Credits
Sl. Course and

hours
Course Title
No Course code

L T P
1 PCC Machine Learning CS / IS / AI / --
18AI61 AD 3 2 03 40 60 100 4
2 PCC Data Science and its CS / IS / AI / -- 40 60 100
18AD62 AD 3 2 03 4
applications
3 PCC Java for Mobile CS / IS / AI / -- 40 60 100
18AI63 AD 3 2 03 4
applications
4 PEC CS / IS / AI / -- -- 40 60 100
18AD64X Professional Elective -1 AD 3 03 3
5 OEC CS / IS / AI/ -- -- 40 60 100
18AD65X Open Elective –A AD
3 03 3
6 PCC Machine Learning CS / IS / AI / -- 40 60 100
18AIL66 AD 2 2 03 2
Laboratory
7 PCC Data Science CS / IS / AI / -- 2 2 40 60 100 2
18ADL67 AD 03
Laboratory
Mobile Application CS / IS / AI / -- 2 2
AD
8 MP 18ADMP68 Development 03 40 60 100 2
Laboratory
(To be carried out during the
9 INT -- Internship intervening vacations of VI and VII -- -- -- -- --
semesters)
TOTAL 15 12 6 24 320 480 800 24

Note: PCC: Professional core, PEC: Professional Elective, OE: Open Elective, MP: Mini-project, INT: Internship.

Professional Elective -1
Course code Course Title
under18XX64X
18AI641 Natural Language Processing
18AI642 Software project and management
18AI643 Web Programming
18AD644 Analysis on Big data
Open Elective –A (18CS65x are not to be opted by CSE / ISE /AIML/AIDSPrograms)
18CS651 Mobile Application Development
18CS652 Introduction to Data Structures and Algorithms
18CS653 Programming in JAVA
18CS654 Introduction to Operating System
Students can select any one of the open electives offered by any Department (Please refer to the list of open electives under 18CS65X).
Selection of an open elective is not allowed provided,
 The candidate has studied the same course during the previous semesters of the programme.
 The syllabus content of open elective is similar to that of Departmental core courses or professional electives.
 A similar course, under any category, is prescribed in the higher semesters of the programme.
Registration to electives shall be documented under the guidance of Programme Coordinator/ Adviser/Mentor.

Mini-project work: Based on the ability/abilities of the student/s and recommendations of the mentor, a single discipline or a multidisciplinary Mini- project
can be assigned to an individual student or to a group having not more than 4 students.
CIE procedure for Mini project:
(i) Single discipline: The CIE marks shall be awarded by a committee consisting of the Head of the concerned Department and two senior faculty members of
the Department, one of whom shall be the Guide. The CIE marks awarded for the Mini-project work, shall be based on the evaluation of project report, project
presentation skill and question and answer session in the ratio 50:25:25.The marks awarded for the project report shall be the same for all the batch mates.
(ii) Interdisciplinary: Continuous Internal Evaluation shall be group wise at the college level with the participation of all the guides of the college. The CIE
marks awarded for the Mini-project, shall be based on the evaluation of project report, project presentation skill and question and answer session in the ratio
50:25:25.The marks awarded for the project report shall be the same for all the batch mates.
SEE for Mini project:
(i) Single discipline: Contribution to the Mini-project and the performance of each group member shall be assessed individually in the semester end

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 6

examination (SEE) conducted at the department.

(ii) Interdisciplinary: Contribution to the Mini-project and the performance of each group member shall be assessed individually in semester end examination
(SEE) conducted separately at the departments to which the student/s belong to.
Internship: All the students admitted to III year of BE/B.Tech shall have to undergo mandatory internship of 4 weeks during the vacation of VI and VII
semesters and /or VII and VIII semesters. A University examination shall be conducted during VIII semester and the prescribed credit shall be included in VIII
semester. Internship shall be considered as a head of passing and shall be considered for the award of degree. Those, who do not takeup/complete the internship
shall be declared fail and shall have to complete during subsequent University examination after satisfying the internship requirements

AICTE activity Points: In case students fail to earn the prescribed activity Points, Eighth semester Grade Card shall be issued only after
earning the required activity Points. Students shall be admitted for the award of degree only after the release of the Eighth semester Grade
Card.

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in CSE(Data Science) (CD)
Scheme of Teaching and Examinations
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(2018 scheme Effective from the academic year 2020-21)
VII SEMESTER
Teaching Hours /Week Examination
Department

Practical/
Drawing

Total Marks
Tutorial
Teaching

CIE Marks
Lecture

SEE Marks
Duration in
Theory

Credits
Sl. Course and

hours
Course Title
No Course code

L T P
1 CS / IS / AI / AD 1
Advanced Artificial
PCC 18AI71 4 -- -- 03 40
0 4 60
Intelligence
0
2 CS / IS / AI / AD 1
PCC 18AD72 Data Visualization 4 -- -- 03 40 60 0 4
0
3 CS / IS / AI / AD 1
Professional Elective –
PEC 18AD73X 3 -- -- 03 40 60 0 3
2
0
4 CS / IS / AI / AD 1
Professional Elective –
PEC 18AD74X 3 -- -- 03 40 60 0 3
3
0
5 CS / IS / AI / AD 1
OEC 18AD75X Open Elective –B 3 -- -- 03 40 60 0 3
0
6 Visualization & DS CS / IS / AI / AD 1
PCC 18ADL76 Mini Project -- -- 2 03 40 60 0 1
Laboratory 0
CS / IS / AI / AD 1
Project Work Phase –
7 Project 18ADP77 -- -- 2 -- 100 -- 0 2
1
0
(If not completed during the vacation of VI and VII semesters, it has to be
8 INT -- Internship
carried out during the intervening vacations of VII and VIII semesters
TOTAL 7
17 -- 4 18 340 360 0 20
0

Note: PCC: Professional core, PEC: Professional Elective, OEC: Open Elective, INT: Internship.
Professional Elective – 2
Course code Course Title
under 18AD73X
18AI731 Internet of Things 18AI733 Blockchain Technology
18AD732 Advanced Data Analytics 18AI734 Cloud Computing and Virtualization
Professional Electives – 3
Course code Course Title
under 18AD74X
18AI741 Fuzzy Logic& its Applications 18AI743 Semantic Web and Social Network
18AD742 Image processing 18AI744 Business Intelligence
Open Elective –B (18CS75x are not to be opted by CSE / ISE / AIML/AIDS Programs)

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 7

18CS751 Introduction to Big Data Analytics

18CS752 Python Application Programming
18CS753 Introduction to Artificial Intelligence
18CS754 Introduction to Dot Net framework for Application Development

Students can select any one of the open electives offered by any Department (Please refer to the list of open electives under 18CS75X).
Selection of an open elective is not allowed provided,
 The candidate has studied the same course during the previous semesters of the programme.
 The syllabus content of open elective is similar to that of Departmental core courses or professional electives.
 A similar course, under any category, is prescribed in the higher semesters of the programme.
 Registration to electives shall be documented under the guidance of Programme Coordinator/ Adviser/Mentor.

Project work: Based on the ability/abilities of the student/s and recommendations of the mentor, a single discipline or a multidisciplinary project can be
assigned to an individual student or to a group having not more than 4 students. In extraordinary cases, like the funded projects requiring students from
different disciplines, the project student strength can be 5 or 6.
CIE procedure for Project Work Phase - 1:
(i) Single discipline: The CIE marks shall be awarded by a committee consisting of the Head of the concerned Department and two senior faculty members
of the Department, one of whom shall be the Guide. The CIE marks awarded for the project work phase -1, shall be based on the evaluation of the project
work phase -1 Report (covering Literature Survey, Problem identification, Objectives and Methodology), project presentation skill and question and answer
session in the ratio 50:25:25.The marks awarded for the Project report shall be the same for all the batch mates.
(ii) Interdisciplinary: Continuous Internal Evaluation shall be group wise at the college level with the participation of all guides of the college. Participation
of external guide/s, if any, is desirable. The CIE marks awarded for the project work phase -1, shall be based on the evaluation of project work phase -1
Report, project presentation skill and question and answer session in the ratio 50:25:25.The marks awarded for the project report shall be the same for all the
batch mates.
Internship: All the students admitted to III year of BE/B.Tech shall have to undergo mandatory internship of 4 weeks during the vacation of VI and VII
semesters and /or VII and VIII semesters. A University examination shall be conducted during VIII semester and the prescribed credit shall be included in
VIII semester. Internship shall be considered as a head of passing and shall be considered for the award of degree. Those, who do not takeup/complete the
internship shall be declared fail and shall have to complete during subsequent University examination after satisfying the internship requirements

AICTE activity Points: In case students fail to earn the prescribed activity Points, Eighth semester Grade Card shall be issued only after earning the required
activity Points. Students shall be admitted for the award of degree only after the release of the Eighth semester Grade Card.

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in CSE(Data Science) (CD)
Scheme of Teaching and Examinations
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(2018 scheme Effective from the academic year 2020-21))
VIII SEMESTER
Teaching Hours /Week Examination
Department

Total Marks
Practical/
Teaching

CIE Marks

SEE Marks
Duration in
Drawing
Tutorial
Lecture

Credits
Theory

Course and
Sl.
hours

Course code Course Title

No

L T P
1 PCC 18AD81 Data Security and Privacy AD 3 -- -- 03 40 60 100 3
2 PEC 18AD82X Professional Elective – 4 AI 3 -- -- 03 40 60 100 3
3 Project 18ADP83 Project Work Phase – 2 AI -- -- 2 03 40 60 100 8
4 Seminar Technical Seminar AI -- -- 2 100 -- 100
18ADS84 03 1
(Completed during the
intervening vacations of VI and
5 INT 18ADI85 Internship 03 40 60 100 3
VII semesters and /or VII and
VIII semesters.)
TOTAL 06 -- 4 15 260 240 500 18

Note: PCC: Professional Core, PEC: Professional Elective, OEC: Open Elective, INT: Internship.

Professional Electives – 4
Course code Course Title
under 18AD82X
18AI821 System Modelling and Simulation
18AI822 Soft and Evolutionary Computing
18AI823 Robotic Process Automation Design and Development
18AD824 Deep Learning

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 8

Project Work CIE procedure for Project Work Phase - 2:

(i) Single discipline: The CIE marks shall be awarded by a committee consisting of the Head of the concerned Department and two senior
faculty members of the Department, one of whom shall be the Guide. The CIE marks awarded for the project work phase -2, shall be based
on the evaluation of project work phase -2 Report, project presentation skill and question and answer session in the ratio 50:25:25.The
marks awarded for the project report shall be the same for all the batch mates.
(ii) Interdisciplinary: Continuous Internal Evaluation shall be group wise at the college level with the participation of all guides of the
college. Participation of external guide/s, if any, is desirable. The CIE marks awarded for the project work phase -2, shall be based on the
evaluation of project work phase -2 Report, project presentation skill and question and answer session in the ratio 50:25:25.The marks
awarded for the project report shall be the same for all the batch mates.
SEE for Project Work Phase - 2:
(i) Single discipline: Contribution to the project and the performance of each group member shall be assessed individually in semester end
examination (SEE) conducted at the department.
(ii) Interdisciplinary: Contribution to the project and the performance of each group member shall be assessed individually in semester
end examination (SEE) conducted separately at the departments to which the student/s belong to.
Internship: Those, who have not pursued /completed the internship shall be declared as fail and have to complete during subsequent
University examination after satisfying the internship requirements

AICTE activity Points: In case students fail to earn the prescribed activity Points, eighth semester Grade Card shall be issued only after
earning the required activity Points. Students shall be admitted for the award of degree only after the release of the Eighth semester Grade
Card. Activity points of the students who have earned the prescribed AICTE activity Points shall be sent the University along with the CIE
marks of 8th semester. In case of students who have not satisfied the AICTE activity Points at the end of eighth semester, the column under
activity Points shall be marked NSAP (Not Satisfied Activity Points).

JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

1
TRANSFORM CALCULUS, FOURIER SERIES AND NUMERICAL TECHNIQUES
(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18MAT31 CIE Marks 40
Number of Contact Hours/Week 2:2:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 To have an insight into Fourier series, Fourier transforms, Laplace transforms, Difference equations
and Z-transforms.
 To develop the proficiency in variational calculus and solving ODE‟s arising in engineering
applications, using numerical methods.

Module 1 Contact
Hours
Laplace Transform: Definition and Laplace transforms of elementary functions (statements 08
only). Laplace transforms of Periodic functions (statement only) and unit-step function –
problems.
Inverse Laplace Transform: Definition and problems, Convolution theorem to find the inverse
Laplace transforms (without Proof) and problems. Solution of linear differential equations using
Laplace transforms.
RBT: L2, L3
Module 2
Fourier Series: Periodic functions, Dirichlet‟s condition. Fourier series of periodic functions 08
period 2 and arbitrary period. Half range Fourier series. Practical harmonic analysis.

RBT: L1, L2
Module 3
Fourier Transforms: Infinite Fourier transforms, Fourier sine and cosine transforms. Inverse 08
Fourier transforms. Problems.
Difference Equations and Z-Transforms: Difference equations, basic definition, z-transform-
definition, Standard z-transforms, Damping and shifting rules, initial value and final value
theorems (without proof) and problems, Inverse z-transformand applications to solve difference
equations.

RBT: L1, L2
Module 4
Numerical Solutions of Ordinary Differential Equations(ODE’s): 08
Numerical solution of ODE‟s of first order and first degree- Taylor‟s series method, Modified
Euler‟s method. Runge - Kutta method of fourth order, Milne‟s and Adam-Bashforthpredictor and
corrector method (No derivations of formulae)-Problems.

RBT: L1, L2
Module 5
Numerical Solution of Second Order ODE’s:Runge -Kutta method and Milne‟s predictor and 08
corrector method. (No derivations of formulae).
Calculus of Variations: Variation of function and functional, variational problems, Euler‟s
equation, Geodesics, hanging chain, problems.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Use Laplace transform and inverse Laplace transform in solving differential/ integral equation arising
in network analysis, control systems and other fields of engineering.
 Demonstrate Fourier series to study the behaviour of periodic functions and their applications in system
communications, digital signal processing and field theory.
 Make use of Fourier transform and Z-transform to illustrate discrete/continuous function arising in
wave and heat propagation, signals and systems.
 Solve first and second order ordinary differential equations arising in engineering problems using
single step and multistep numerical methods.
 Determine the extremals of functionals using calculus of variations and solve problems arising
in dynamics of rigid bodies and vibrational analysis.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. E. Kreyszig, Advanced Engineering Mathematics, John Wiley & Sons, 10th Edition, 2016
2. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 44th Edition, 2017
3. Srimanta Pal et al , Engineering Mathematics, Oxford University Press, 3rd Edition, 2016
Reference Books:
1. C.Ray Wylie, Louis C.Barrett , Advanced Engineering Mathematics, McGraw-Hill Book Co, 6th
Edition, 1995
2. S.S.Sastry, Introductory Methods of Numerical Analysis, Prentice Hall of India, 4th Edition 2010
3. B.V.Ramana, Higher Engineering Mathematics, McGraw-Hill, 11th Edition,2010
4. N.P.Bali and Manish Goyal, A Text Book of Engineering Mathematics, Laxmi Publications, 6th
Edition, 2014
Web links and Video Lectures:
1. http://nptel.ac.in/courses.php?disciplineID=111
2. http://www.class-central.com/subject/math(MOOCs)
3. http://academicearth.org/
4. VTU EDUSAT PROGRAMME – 20

ADDITIONAL MATHEMATICS – I
(Mandatory Learning Course: Common to All Branches)
(A Bridge course for Lateral Entry students under Diploma quota to BE/B.Tech programmes)
(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18MATDIP31 CIE Marks 40
Number of Contact Hours/Week 2:1:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 00
Course Learning Objectives: This course will enable students to:
 To provide basic concepts of complex trigonometry, vector algebra, differential and integral calculus.
 To provide an insight into vector differentiation and first order ODE‟s.

Module 1 Contact
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Hours
Complex Trigonometry: Complex Numbers: Definitions and properties. Modulus and 08
amplitude of a complex number, Argand‟s diagram, De-Moivre‟s theorem (without proof).
Vector Algebra: Scalar and vectors. Addition and subtraction and multiplication of vectors- Dot
and Cross products, problems.
RBT: L2, L2
Module 2
Differential Calculus: Review of successive differentiation-illustrative examples. Maclaurin‟s 08
series expansions-Illustrative examples. Partial Differentiation: Euler‟s theorem-problems on first
order derivatives only. Total derivatives-differentiation of composite functions. Jacobians of order
two-Problems.

RBT: L1, L2
Module 3
Vector Differentiation: Differentiation of vector functions. Velocity and acceleration of a 08
particle moving on a space curve. Scalar and vector point functions. Gradient, Divergence, Curl-
simple problems. Solenoidal and irrotational vector fields-Problems.

RBT: L1, L2
Module 4
Integral Calculus: Review of elementary integral calculus. Reduction formulae for sinnx, cosnx 08
(with proof) and sinmxcosnx (without proof) and evaluation of these with standard limits-
Examples. Double and triple integrals-Simple examples.

RBT: L1, L2
Module 5
Ordinary differential equations (ODE’s. Introduction-solutions of first order and first degree 08
differential equations: exact, linear differential equations. Equations reducible to exact and
Bernoulli‟s equation.

RBT: L1, L2
Course Outcomes: The student will be able to :
 Apply concepts of complex numbers and vector algebra to analyze the problems arising in related area.
 Use derivatives and partial derivatives to calculate rate of change of multivariate functions.
 Analyze position, velocity and acceleration in two and three dimensions of vector valued functions.
 Learn techniques of integration including the evaluation of double and triple integrals.
 Identify and solve first order ordinary differential equations.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 43rd Edition, 2015
Reference Books:
1. E. Kreyszig, Advanced Engineering Mathematics, John Wiley & Sons, 10th Edition, 2016
2. N.P.Bali and Manish Goyal, A Text Book of Engineering Mathematics, Laxmi Publications, 6th
Edition, 2014
3. RohitKhurana , Engineering Mathematics Vol.I, Cengage Learning, 1st Edition, 2015.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

DATA STRUCTURES AND APPLICATIONS

(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18CS32 CIE Marks 40
Number of Contact Hours/Week 3:2:0 SEE Marks 60
Total Number of Contact Hours 50 Exam Hours 3 Hrs
CREDITS –4
Course Learning Objectives: This course will enable students to:
 Explain fundamentals of data structures and their applications essential for programming/problem
solving.
 Illustrate linear representation of data structures: Stack, Queues, Lists, Trees and Graphs.
 Demonstrate sorting and searching algorithms.
 Find suitable data structure during application development/Problem Solving.

Module 1 Contact
Hours
Introduction: Data Structures, Classifications (Primitive &Non Primitive), Data structure 8
Operations, Review of Arrays, Structures, Self-Referential Structures, and Unions. Pointers and
Dynamic Memory Allocation Functions. Representation of Linear Arrays in Memory,
Dynamically allocated arrays.
Array Operations: Traversing, inserting, deleting, searching, and sorting. Multidimensional
Arrays, Polynomials and Sparse Matrices.
Strings: Basic Terminology, Storing, Operations and Pattern Matching algorithms.
Programming Examples.
Textbook 1: Chapter 1: 1.2, Chapter 2: 2.2 - 2.7Text Textbook 2: Chapter 1: 1.1 - 1.4,
Chapter 3: 3.1 - 3.3, 3.5, 3.7, Chapter 4: 4.1 - 4.9, 4.14Reference 3: Chapter 1: 1.4
RBT: L1, L2, L3

Module 2
Stacks: Definition, Stack Operations, Array Representation of Stacks, Stacks using Dynamic 8
Arrays, Stack Applications: Polish notation, Infix to postfix conversion, evaluation of postfix
expression.
Recursion - Factorial, GCD, Fibonacci Sequence, Tower of Hanoi, Ackerman's function.
Queues: Definition, Array Representation, Queue Operations, Circular Queues, Circular queues
using Dynamic arrays, Dequeues, Priority Queues, A Mazing Problem. Multiple Stacks and
Queues. Programming Examples.
Textbook 1: Chapter 3: 3.1 -3.7Textbook 2: Chapter 6: 6.1 -6.3, 6.5, 6.7-6.10, 6.12, 6.13
RBT: L1, L2, L3
Module 3
Linked Lists: Definition, Representation of linked lists in Memory, Memory allocation; 8
Garbage Collection. Linked list operations: Traversing, Searching, Insertion, and Deletion.
Doubly Linked lists, Circular linked lists, and header linked lists. Linked Stacks and Queues.
Applications of Linked lists – Polynomials, Sparse matrix representation. Programming
Examples
Textbook 1: Chapter 4: 4.1 – 4.6, 4.8, Textbook 2: Chapter 5: 5.1 – 5.10,
RBT: L1, L2, L3
Module 4
Trees: Terminology, Binary Trees, Properties of Binary trees, Array and linked Representation 8
of Binary Trees, Binary Tree Traversals - Inorder, postorder, preorder; Additional Binary tree
operations. Threaded binary trees, Binary Search Trees – Definition, Insertion, Deletion,
Traversal, Searching, Application of Trees-Evaluation of Expression, Programming Examples
Textbook 1: Chapter 5: 5.1 –5.5, 5.7; Textbook 2: Chapter 7: 7.1 – 7.9
RBT: L1, L2, L3
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Module 5
Graphs: Definitions, Terminologies, Matrix and Adjacency List Representation Of Graphs, 8
Elementary Graph operations, Traversal methods: Breadth First Search and Depth First Search.
Sorting and Searching: Insertion Sort, Radix sort, Address Calculation Sort.
Hashing: Hash Table organizations, Hashing Functions, Static and Dynamic Hashing.
Files and Their Organization:Data Hierarchy, File Attributes, Text Files and Binary Files,
Basic File Operations, File Organizations and Indexing
Textbook 1: Chapter 6 : 6.1 –6.2, Chapter 7:7.2, Chapter 8 : 8.1-8.3
Textbook 2: Chapter 8 : 8.1 – 8.7, Chapter 9 : 9.1-9.3, 9.7, 9.9
Reference 2: Chapter 16 : 16.1 - 16.7
RBT: L1, L2, L3
Course Outcomes: The student will be able to :
 Use different types of data structures, operations and algorithms
 Apply searching and sorting operations on files
 Use stack, Queue, Lists, Trees and Graphs in problem solving
 Implement all data structures in a high-level language for problem solving.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Ellis Horowitz and SartajSahni, Fundamentals of Data Structures in C, 2nd Ed, Universities Press,
2014.
2. Seymour Lipschutz, Data Structures Schaum's Outlines, Revised 1st Ed, McGraw Hill, 2014.

Reference Books:
1. Gilberg&Forouzan, Data Structures: A Pseudo-code approach with C, 2nd Ed, Cengage
Learning,2014.
2. ReemaThareja, Data Structures using C, 3rd Ed, Oxford press, 2012.
3. Jean-Paul Tremblay & Paul G. Sorenson, An Introduction to Data Structures with Applications, 2nd
Ed, McGraw Hill, 2013
4. A M Tenenbaum, Data Structures using C, PHI, 1989
5. Robert Kruse, Data Structures and Program Design in C, 2nd Ed, PHI, 1996.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

ANALOG AND DIGITAL ELECTRONICS

(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18CS33 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Explain the use of photoelectronics devices, 555 timer IC, Regulator ICs and uA741 opamap IC
 Make use of simplifying techniques in the design of combinational circuits.
 Illustrate combinational and sequential digital circuits
 Demonstrate the use of flipflops and apply for registers
 Design and test counters, Analog-to-Digital and Digital-to-Analog conversion techqniues.

Module 1 Contact
Hours
Photodiodes, Light Emitting Diodes and Optocouplers ,BJT Biasing :Fixed bias ,Collector to 08
base Bias , voltage divider bias, Operational Amplifier Application Circuits: Multivibrators using
IC-555, Peak Detector, Schmitt trigger, Active Filters, Non-Linear Amplifier, Relaxation
Oscillator, Current-to-Voltage and Voltage-to-Current Converter , Regulated Power Supply
Parameters, adjustable voltage regulator ,D to A and A to D converter.
Text Book 1 :Part A:Chapter 2(Section 2.9,2.10,2.11), Chapter 4(Section 4.2
,4.3,4.4),Chapter 7 (section (7.2,7.3.1,7.4,7.6 to 7.11), Chapter 8 (section (8.1,8.5), Chapter 9

RBT: L1, L2
Module 2
Karnaugh maps: minimum forms of switching functions, two and three variable Karnaugh maps, 08
four variable karnaugh maps, determination of minimum expressions using essential prime
implicants, Quine-McClusky Method: determination of prime implicants, The prime implicant
chart, petricks method, simplification of incompletely specified functions, simplification using
map-entered variables
Text book 1:Part B: Chapter 5 ( Sections 5.1 to 5.4) Chapter 6(Sections 6.1 to 6.5)

RBT: L1, L2
Module 3
Combinational circuit design and simulation using gates: Review of Combinational circuit 08
design, design of circuits with limited Gate Fan-in ,Gate delays and Timing diagrams, Hazards in
combinational Logic, simulation and testing of logic circuits
Multiplexers, Decoders and Programmable Logic Devices: Multiplexers, three state buffers,
decoders and encoders, Programmable Logic devices, Programmable Logic Arrays,
Programmable Array Logic.
Text book 1:Part B: Chapter 8,Chapter 9 (Sections 9.1 to 9.6)

RBT: L1, L2

Module 4
Introduction to VHDL: VHDL description of combinational circuits, VHDL Models for 08
multiplexers, VHDL Modules.
Latches and Flip-Flops: Set Reset Latch, Gated Latches, Edge-Triggered D Flip Flop 3,SR Flip
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Flop, J K Flip Flop, T Flip Flop, Flip Flop with additional inputs, Asynchronous Sequential
Circuits
Text book 1:Part B: Chapter 10(Sections 10.1 to 10.3),Chapter 11 (Sections 11.1 to 11.9)

RBT: L1, L2
Module 5
Registers and Counters: Registers and Register Transfers, Parallel Adder with accumulator, shift 08
registers, design of Binary counters, counters for other sequences, counter design using SR and J
K Flip Flops, sequential parity checker, state tables and graphs
Text book 1:Part B: Chapter 12(Sections 12.1 to 12.5),Chapter 13(Sections 13.1,13.3

RBT: L1, L2
Course Outcomes: The student will be able to :
 Design and analyze application of analog circuits using photo devices, timer IC, power supply and
regulator IC and op-amp.
 Explain the basic principles of A/D and D/A conversion circuits and develop the same.
 Simplify digital circuits using Karnaugh Map , and Quine-McClusky Methods
 Explain Gates and flip flops and make us in designing different data processing circuits, registers and
counters and compare the types.
 Develop simple HDL programs
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Charles H Roth and Larry L Kinney, Raghunandan G H, Analog and Digital Electronics, Cengage
Learning,2019
Reference Books:
1. Anil K Maini, Varsha Agarwal, Electronic Devices and Circuits, Wiley, 2012.
2. Donald P Leach, Albert Paul Malvino&GoutamSaha, Digital Principles and Applications, 8th Edition,
Tata McGraw Hill, 2015.
3. M. Morris Mani, Digital Design, 4th Edition, Pearson Prentice Hall, 2008.
4. David A. Bell, Electronic Devices and Circuits, 5th Edition, Oxford University Press, 2008
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

COMPUTER ORGANIZATION
(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18CS34 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Explain the basic sub systems of a computer, their organization, structure and operation.
 Illustrate the concept of programs as sequences of machine instructions.
 Demonstrate different ways of communicating with I/O devices and standard I/O interfaces.
 Describe memory hierarchy and concept of virtual memory.
 Describe arithmetic and logical operations with integer and floating-point operands.
 Illustrate organization of a simple processor, pipelined processor and other computing systems.
Module 1 Contact
Hours
Basic Structure of Computers: Basic Operational Concepts, Bus Structures, Performance – 08
Processor Clock, Basic Performance Equation, Clock Rate, Performance Measurement. Machine
Instructions and Programs: Memory Location and Addresses, Memory Operations,
Instructions and Instruction Sequencing, Addressing Modes, Assembly Language, Basic Input
and Output Operations, Stacks and Queues, Subroutines, Additional Instructions, Encoding of
Machine Instructions

Text book 1: Chapter1 – 1.3, 1.4, 1.6 (1.6.1-1.6.4, 1.6.7), Chapter2 – 2.2 to 2.10

RBT: L1, L2, L3

Module 2
Input/Output Organization: Accessing I/O Devices, Interrupts – Interrupt Hardware, Direct 08
Memory Access, Buses, Interface Circuits, Standard I/O Interfaces – PCI Bus, SCSI Bus, USB.

Text book 1: Chapter4 – 4.1, 4.2, 4.4, 4.5, 4.6, 4.7

RBT: L1, L2, L3

Module 3
Memory System: Basic Concepts, Semiconductor RAM Memories, Read Only Memories, 08
Speed, Size, and Cost, Cache Memories – Mapping Functions, Replacement Algorithms,
Performance Considerations.

Text book 1: Chapter5 – 5.1 to 5.4, 5.5(5.5.1, 5.5.2), 5.6

RBT: L1, L2, L3

Module 4
Arithmetic: Numbers, Arithmetic Operations and Characters, Addition and Subtraction of Signed 08
Numbers, Design of Fast Adders, Multiplication of Positive Numbers, Signed Operand
Multiplication, Fast Multiplication, Integer Division.

Text book 1: Chapter2-2.1, Chapter6 – 6.1 to 6.6

RBT: L1, L2, L3
Module 5
Basic Processing Unit: Some Fundamental Concepts, Execution of a Complete Instruction, 08
Multiple Bus Organization, Hard-wired Control, Micro programmed Control.
Pipelining: Basic concepts of pipelining,
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Text book 1: Chapter7, Chapter8 – 8.1

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Explain the basic organization of a computer system.
 Demonstrate functioning of different sub systems, such as processor, Input/output,and memory.
 Illustrate hardwired control and micro programmed control, pipelining, embedded and other
computing systems.
 Design and analyse simple arithmetic and logical units.

Question Paper Pattern:

 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Carl Hamacher, ZvonkoVranesic, SafwatZaky, Computer Organization, 5th Edition, Tata McGraw
Hill, 2002. (Listed topics only from Chapters 1, 2, 4, 5, 6, 7, 8, 9 and12)
Reference Books:
1. William Stallings: Computer Organization & Architecture, 9th Edition, Pearson, 2015.

SOFTWARE ENGINEERING
(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18CS35 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Outline software engineering principles and activities involved in building large software
programs.Identify ethical and professional issues and explain why they are of concern to software
engineers.
 Explain the fundamentals of object oriented concepts
 Describe the process of requirements gathering, requirements classification, requirements specification
and requirements validation. Differentiate system models, use UML diagrams and apply design
patterns.
 Discuss the distinctions between validation testing and defect testing.
 Recognize the importance of software maintenance and describe the intricacies involved in software
evolution.Apply estimation techniques, schedule project activities and compute pricing.
 Identify software quality parameters and quantify software using measurements and metrics. List
software quality standards and outline the practices involved.
Module 1 Contact
Hours
Introduction: Software Crisis, Need for Software Engineering. Professional Software 08
Development, Software Engineering Ethics. Case Studies.
Software Processes: Models: Waterfall Model (Sec 2.1.1), Incremental Model (Sec 2.1.2) and
Spiral Model (Sec 2.1.3). Process activities.
Requirements Engineering: Requirements Engineering Processes (Chap 4). Requirements
Elicitation and Analysis (Sec 4.5). Functional and non-functional requirements (Sec 4.1). The
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

software Requirements Document (Sec 4.2). Requirements Specification (Sec 4.3). Requirements
validation (Sec 4.6). Requirements Management (Sec 4.7).

RBT: L1, L2, L3

Module 2
What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of 08
OO development; OO modelling history. Modelling as Design technique: Modelling; abstraction;
The Three models. Introduction, Modelling Concepts and Class Modelling: What is Object
orientation? What is OO development? OO Themes; Evidence for usefulness of OO
development; OO modelling history. Modelling as Design technique: Modelling; abstraction; The
Three models. Class Modelling: Object and Class Concept; Link and associations concepts;
Generalization and Inheritance; A sample class model; Navigation of class models;

Textbook 2: Ch 1,2,3.
RBT: L1, L2 L3
Module 3
System Models: Context models (Sec 5.1). Interaction models (Sec 5.2). Structural models (Sec 08
5.3). Behavioral models (Sec 5.4). Model-driven engineering (Sec 5.5).
Design and Implementation: Introduction to RUP (Sec 2.4), Design Principles (Chap 17).
Object-oriented design using the UML (Sec 7.1). Design patterns (Sec 7.2). Implementation
issues (Sec 7.3). Open source development (Sec 7.4).

RBT: L1, L2, L3

Module 4
Software Testing: Development testing (Sec 8.1), Test-driven development (Sec 8.2), Release 08
testing (Sec 8.3), User testing (Sec 8.4). Test Automation (Page no 42, 70,212, 231,444,695).
Software Evolution: Evolution processes (Sec 9.1). Program evolution dynamics (Sec 9.2).
Software maintenance (Sec 9.3). Legacy system management (Sec 9.4).

RBT: L1, L2, L3

Module 5
Project Planning: Software pricing (Sec 23.1). Plan-driven development (Sec 23.2). Project 08
scheduling (Sec 23.3): Estimation techniques (Sec 23.5). Quality management: Software quality
(Sec 24.1). Reviews and inspections (Sec 24.3). Software measurement and metrics (Sec 24.4).
Software standards (Sec 24.2)

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Design a software system, component, or process to meet desired needs within realistic constraints.
 Assess professional and ethical responsibility
 Function on multi-disciplinary teams
 Use the techniques, skills, and modern engineering tools necessary for engineering practice
 Analyze, design, implement, verify, validate, implement, apply, and maintain software systems or
parts of software systems
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Textbooks:
1. Ian Sommerville: Software Engineering, 9th Edition, Pearson Education, 2012. (Listed topics only
from Chapters 1,2,3,4, 5, 7, 8, 9, 23, and 24)
2. Michael Blaha, James Rumbaugh: Object Oriented Modelling and Design with UML,2nd Edition,
Pearson Education,2005.
Reference Books:
1. Roger S. Pressman: Software Engineering-A Practitioners approach, 7th Edition, Tata McGraw Hill.
2. Pankaj Jalote: An Integrated Approach to Software Engineering, Wiley India

DISCRETE MATHEMATICAL STRUCTURES

(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18CS36 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Provide theoretical foundations of computer science to perceive other courses in the programme.
 Illustrate applications of discrete structures: logic, relations, functions, set theory and counting.
 Describe different mathematical proof techniques,
 Illustrate the importance of graph theory in computer science
Module 1 Contact
Hours
Fundamentals of Logic: Basic Connectives and Truth Tables, Logic Equivalence – The Laws of 08
Logic, Logical Implication – Rules of Inference. Fundamentals of Logic contd.: The Use of
Quantifiers, Quantifiers, Definitions and the Proofs of Theorems.

Text book 1: Chapter2

RBT: L1, L2, L3

Module 2
Properties of the Integers: The Well Ordering Principle – Mathematical Induction, 08

Fundamental Principles of Counting: The Rules of Sum and Product, Permutations,

Combinations – The Binomial Theorem, Combinations with Repetition.

Text book 1: Chapter4 – 4.1, Chapter1

RBT: L1, L2, L3

Module 3
Relations and Functions: Cartesian Products and Relations, Functions – Plain and One-to-One, 08
Onto Functions. The Pigeon-hole Principle, Function Composition and Inverse Functions.
Relations: Properties of Relations, Computer Recognition – Zero-One Matrices and Directed
Graphs, Partial Orders –Hasse Diagrams, Equivalence Relations and Partitions.

Text book 1: Chapter5 , Chapter7 – 7.1 to 7.4

 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1, L2, L3

Module 4
The Principle of Inclusion and Exclusion: The Principle of Inclusion and Exclusion, 08
Generalizations of the Principle, Derangements – Nothing is in its Right Place, Rook
Polynomials.
Recurrence Relations: First Order Linear Recurrence Relation, The Second Order Linear
Homogeneous Recurrence Relation with Constant Coefficients.

Text book 1: Chapter8 – 8.1 to 8.4, Chapter10 – 10.1, 10.2

RBT: L1, L2, L3

Module 5
Introduction to Graph Theory: Definitions and Examples, Sub graphs, Complements, and 08
Graph Isomorphism,
Trees: Definitions, Properties, and Examples, Routed Trees, Trees and Sorting, Weighted Trees
and Prefix Codes

Text book 1: Chapter11 – 11.1 to 11.2 Chapter12 – 12.1 to 12.4

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Use propositional and predicate logic in knowledge representation and truth verification.
 Demonstrate the application of discrete structures in different fields of computer science.
 Solve problems using recurrence relations and generating functions.
 Application of different mathematical proofs techniques in proving theorems in the courses.
 Compare graphs, trees and their applications.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Ralph P. Grimaldi: Discrete and Combinatorial Mathematics, 5th Edition, Pearson Education. 2004.
Reference Books:
1. Basavaraj S Anami and Venakanna S Madalli: Discrete Mathematics – A Concept based approach,
Universities Press, 2016
2. Kenneth H. Rosen: Discrete Mathematics and its Applications, 6th Edition, McGraw Hill, 2007.
3. Jayant Ganguly: A Treatise on Discrete Mathematical Structures, Sanguine-Pearson, 2010.
4. D.S. Malik and M.K. Sen: Discrete Mathematical Structures: Theory and Applications, Thomson,
2004.
5. Thomas Koshy: Discrete Mathematics with Applications, Elsevier, 2005, Reprint 2008.

ANALOG AND DIGITAL ELECTRONICS LABORATORY

(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18CSL37 CIE Marks 40
Number of Contact Hours/Week 0:2:2 SEE Marks 60
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Total Number of Lab Contact Hours 36 Exam Hours 3 Hrs

Credits – 2
Course Learning Objectives: This course will enable students to:
This laboratory course enable students to get practical experience in design, assembly and evaluation/testing
of
 Analog components and circuits including Operational Amplifier, Timer, etc.
 Combinational logic circuits.
 Flip - Flops and their operations
 Counters and registers using flip-flops.
 Synchronous and Asynchronous sequential circuits.
 A/D and D/A converters
Descriptions (if any):
 Simulation packages preferred: Multisim, Modelsim, PSpice or any other relevant.
 For Part A (Analog Electronic Circuits) students must trace the wave form on Tracing sheet / Graph
sheet and label trace.
 Continuous evaluation by the faculty must be carried by including performance of a student in both
hardware implementation and simulation (if any) for the given circuit.
 A batch not exceeding 4 must be formed for conducting the experiment. For simulation individual
student must execute the program.

Laboratory Programs:
PART A (Analog Electronic Circuits)

1. Design an astablemultivibratorciruit for three cases of duty cycle (50%, <50% and >50%) using
NE 555 timer IC. Simulate the same for any one duty cycle.
2. Using ua 741 Opamp, design a 1 kHz Relaxation Oscillator with 50% duty cycle. And simulate
the same.
3. Using ua 741 opamap, design a window comparate for any given UTP and LTP. And simulate
the same.
PART B (Digital Electronic Circuits)
4. Design and implement Half adder, Full Adder, Half Subtractor, Full Subtractor using basic gates.
And implement the same in HDL.
5. Given a 4-variable logic expression, simplify it using appropriate technique and realize the
simplified logic expression using 8:1 multiplexer IC. And implement the same in HDL.
6. Realize a J-K Master / Slave Flip-Flop using NAND gates and verify its truth table. And
implement the same in HDL.
7. Design and implement code converter I)Binary to Gray (II) Gray to Binary Code using basic
gates.
8. Design and implement a mod-n (n<8) synchronous up counter using J-K Flip-Flop ICs and
demonstrate its working.
9. Design and implement an asynchronous counter using decade counter IC to count up from 0 to n
(n<=9) and demonstrate on 7-segment display (using IC-7447)
Laboratory Outcomes: The student should be able to:
 Use appropriate design equations / methods to design the given circuit.
 Examine and verify the design of both analog and digital circuits using simulators.
 Make us of electronic components, ICs, instruments and tools for design and testing of circuits for the
given the appropriate inputs.
 Compile a laboratory journal which includes; aim, tool/instruments/software/components used, design
equations used and designs, schematics, program listing, procedure followed, relevant theory, results
as graphs and tables, interpreting and concluding the findings.
Conduct of Practical Examination:
 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

lot with equal opportunity.

o For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accoradance with university regulations)
a) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks
b) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks

DATA STRUCTURES LABORATORY

(Effective from the academic year 2018 -2019)
SEMESTER – III
Subject Code 18CSL38 CIE Marks 40
Number of Contact Hours/Week 0:2:2 SEE Marks 60
Total Number of Lab Contact Hours 36 Exam Hours 3 Hrs
Credits – 2
Course Learning Objectives: This course will enable students to:
This laboratory course enable students to get practical experience in design, develop, implement, analyze and
evaluation/testing of
 Asymptotic performance of algorithms.
 Linear data structures and their applications such as stacks, queues and lists
 Non-Linear data structures and their applications such as trees and graphs
 Sorting and searching algorithms
Descriptions (if any):
 Implement all the programs in „C / C++‟Programming Language and Linux / Windows as OS.
Programs List:
1. Design, Develop and Implement a menu driven Program in C for the following array operations.
a. Creating an array of N Integer Elements
b. Display of array Elements with Suitable Headings
c. Inserting an Element (ELEM) at a given valid Position (POS)
d. Deleting an Element at a given valid Position(POS)
e. Exit.
Support the program with functions for each of the above operations.
2. Design, Develop and Implement a Program in C for the following operationson Strings.
a. Read a main String (STR), a Pattern String (PAT) and a Replace String (REP)
b. Perform Pattern Matching Operation: Find and Replace all occurrences of PAT in STR
with REP if PAT exists in STR. Report suitable messages in case PAT does not exist in
STR
Support the program with functions for each of the above operations. Don't use Built-in
functions.
3. Design, Develop and Implement a menu driven Program in C for the following operations on
STACK of Integers (Array Implementation of Stack with maximum size MAX)
a. Push an Element on to Stack
b. Pop an Element from Stack
c. Demonstrate how Stack can be used to check Palindrome
d. Demonstrate Overflow and Underflow situations on Stack
e. Display the status of Stack
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

f. Exit
Support the program with appropriate functions for each of the above operations

4. Design, Develop and Implement a Program in C for converting an Infix Expression to Postfix
Expression. Program should support for both parenthesized and free parenthesized expressions
with the operators: +, -, *, /, %(Remainder), ^(Power) and alphanumeric operands.

5. Design, Develop and Implement a Program in C for the following Stack Applications
a. Evaluation of Suffix expression with single digit operands and operators: +, -, *, /, %, ^
b. Solving Tower of Hanoi problem with n disks

6. Design, Develop and Implement a menu driven Program in C for the following operations on
Circular QUEUE of Characters (Array Implementation of Queue with maximum size MAX)
a. Insert an Element on to Circular QUEUE
b. Delete an Element from Circular QUEUE
c. Demonstrate Overflow and Underflow situations on Circular QUEUE
d. Display the status of Circular QUEUE
e. Exit
Support the program with appropriate functions for each of the above operations

7. Design, Develop and Implement a menu driven Program in C for the following operations on
Singly Linked List (SLL) of Student Data with the fields: USN, Name, Branch, Sem, PhNo
a. Create a SLL of N Students Data by using front insertion.
b. Display the status of SLL and count the number of nodes in it
c. Perform Insertion / Deletion at End of SLL
d. Perform Insertion / Deletion at Front of SLL(Demonstration of stack)
e. Exit

8. Design, Develop and Implement a menu driven Program in C for the following operations on
Doubly Linked List (DLL) of Employee Data with the fields: SSN, Name, Dept, Designation, Sal,
PhNo
a. Create a DLL of N Employees Data by using end insertion.
b. Display the status of DLL and count the number of nodes in it
c. Perform Insertion and Deletion at End of DLL
d. Perform Insertion and Deletion at Front of DLL
e. Demonstrate how this DLL can be used as Double Ended Queue.
f. Exit

9. Design, Develop and Implement a Program in C for the following operationson Singly Circular
Linked List (SCLL) with header nodes
a. Represent and Evaluate a Polynomial P(x,y,z) = 6x2y2z-4yz5+3x3yz+2xy5z-2xyz3
b. Find the sum of two polynomials POLY1(x,y,z) and POLY2(x,y,z) and store the result in
POLYSUM(x,y,z)
Support the program with appropriate functions for each of the above operations

10. Design, Develop and Implement a menu driven Program in C for the following operations on
Binary Search Tree (BST) of Integers .
a. Create a BST of N Integers: 6, 9, 5, 2, 8, 15, 24, 14, 7, 8, 5, 2
b. Traverse the BST in Inorder, Preorder and Post Order
c. Search the BST for a given element (KEY) and report the appropriate message
d. Exit
11. Design, Develop and Implement a Program in C for the following operations on Graph(G) of
Cities
a. Create a Graph of N cities using Adjacency Matrix.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

b. Print all the nodes reachable from a given starting node in a digraph using DFS/BFS
method
12. Given a File of N employee records with a set K of Keys(4-digit) which uniquely determine the
records in file F. Assume that file F is maintained in memory by a Hash Table(HT) of m memory
locations with L as the set of memory addresses (2-digit) of locations in HT. Let the keys in K
and addresses in L are Integers. Design and develop a Program in C that uses Hash function H: K
L as H(K)=K mod m (remainder method), and implement hashing technique to map a given
key K to the address space L. Resolve the collision (if any) using linear probing.
Laboratory Outcomes: The student should be able to:
 Analyze and Compare various linear and non-linear data structures
 Code, debug and demonstrate the working nature of different types of data structures and their
applications
 Implement, analyze and evaluate the searching and sorting algorithms
 Choose the appropriate data structure for solving real world problems
Conduct of Practical Examination:
 Experiment distribution
• For laboratories having only one part: Students are allowed to pick one experiment from the
lot with equal opportunity.
• For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accoradance with university regulations)
c) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks
d) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

COMPLEX ANALYSIS, PROBABILITY AND STATISTICAL METHODS

(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18MAT41 CIE Marks 40
Number of Contact Hours/Week 2:2:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 To provide an insight into applications of complex variables, conformal mapping and special
functions arising in potential theory, quantum mechanics, heat conduction and field theory.
 To develop probability distribution of discrete, continuous random variables and joint probability
distribution occurring in digital signal processing, design engineering and microwave engineering.

Module 1 Contact
Hours
Calculus of complex functions: Review offunction of a complex variable, limits, continuity, and 08
differentiability. Analytic functions: Cauchy-Riemann equations in cartesian and polar forms and
consequences. Construction of analytic functions : Milne-Thomson method-Problems.
RBT: L1, L2

Module 2
Conformal transformations: Introduction. Discussion of transformations: w  z 2 , w  e z , 08

w  z  , z  0 . Bilinear transformations- Problems.

1
z
Complex integration: Line integral of a complex function-Cauchy‟s theorem and Cauchy‟s
integral formula and problems.

RBT: L1, L2
Module 3
Probability Distributions: Review of basic probability theory. Random variables (discrete and 08
continuous), probability mass/density functions. Binomial, Poisson, exponential and normal
distributions- problems (No derivation for mean and standard deviation)-Illustrative examples.
RBT: L1, L2, L3
Module 4
Curve Fitting: Curve fitting by the method of least squares- fitting the curves of the form- 08

y  ax  b, y  ax b & y  ax 2  bx  c.

Statistical Methods: Correlation and regression-Karl Pearson‟s coefficient of correlation and

rank correlation-problems. Regression analysis- lines of regression –problems.

RBT: L1, L2, L3

Module 5
Joint probability distribution: Joint Probability distribution for two discrete random variables, 08
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

expectation and covariance.

Sampling Theory: Introduction to sampling distributions, standard error, Type-I and Type-II
errors. Test of hypothesis for means, student‟s t-distribution, Chi-square distribution as a
test of goodness of fit.

RBT:L2, L3, L4
Course Outcomes: The student will be able to :
 Use the concepts of analytic function and complex potentials to solve the problems arising in
electromagnetic field theory.
 Utilize conformal transformation and complex integral arising in aerofoil theory, fluid flow
visualization and image processing.
 Apply discrete and continuous probability distributions in analyzing the probability models arising in
engineering field.
 Make use of the correlation and regression analysis to fit a suitable mathematical model for the
statistical data.
 Construct joint probability distributions and demonstrate the validity of testing the hypothesis.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. E. Kreyszig, Advanced Engineering Mathematics, John Wiley & Sons, 10th Edition, 2016
2. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 44th Edition, 2017
3. Srimanta Pal et al , Engineering Mathematics, Oxford University Press, 3rd Edition, 2016
Reference Books:
1. C.Ray Wylie, Louis C.Barrett , Advanced Engineering Mathematics, McGraw-Hill Book Co,
6thEdition, 1995
2. S.S.Sastry, Introductory Methods of Numerical Analysis, Prentice Hall of India, 4th Edition 2010
3. B.V.Ramana, Higher Engineering Mathematics, McGraw-Hill, 11th Edition,2010
4. N.P.Bali and Manish Goyal, A Text Book of Engineering Mathematics, Laxmi Publications, 6th
Edition, 2014
Web links and Video Lectures:
1. http://nptel.ac.in/courses.php?disciplineID=111
2. http://www.class-central.com/subject/math(MOOCs)
3. http://academicearth.org/
4. VTU EDUSAT PROGRAMME – 20

ADDITIONAL MATHEMATICS – II
(Mandatory Learning Course: Common to All Branches)
(A Bridge course for Lateral Entry students under Diploma quota to BE/B.Tech programmes)
(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18MATDIP41 CIE Marks 40
Number of Contact Hours/Week 2:1:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 0
Course Learning Objectives: This coursewill enable students to:
 To provide essential concepts of linear algebra, second & higher order differential equations along
with methods to solve them.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 To provide an insight into elementary probability theory and numerical methods.

Module 1 Contact
Hours
Linear Algebra: Introduction - rank of matrix by elementary row operations - Echelon form. 08
Consistency of system of linear equations - Gauss elimination method. Eigen values and eigen
vectors of a square matrix. Problems.
RBT: L2, L2
Module 2
Numerical Methods: Finite differences. Interpolation/extrapolation using Newton‟s forward 08
and backward difference formulae (Statements only)-problems. Solution of polynomial and
transcendental equations – Newton-Raphson and Regula-Falsi methods (only formulae)-
Illustrative examples. Numerical integration: Simpson‟s one third rule and Weddle‟s rule
(without proof) Problems.

RBT: L1, L2, L3

Module 3
Higher order ODE’s: Linear differential equations of second and higher order equations with 08
constant coefficients. Homogeneous /non-homogeneous equations. Inverse differential
operators.[Particular Integral restricted to R(x)= eax , sin ax /cos ax for f Dy  Rx. ]

RBT: L1, L2
Module 4
Partial Differential Equations(PDE’s):- Formation of PDE‟s by elimination of arbitrary 08
constants and functions. Solution of non-homogeneous PDE by direct integration. Homogeneous
PDEs involving derivative with respect to one independent variable only.

RBT: L1, L2
Module 5
Probability: Introduction. Sample space and events. Axioms of probability. Addition & 08
multiplication theorems. Conditional probability, Bayes‟s theorem, problems.

RBT: L1, L2

Course Outcomes: The student will be able to :

 Solve systems of linear equations using matrix algebra.
 Apply the knowledge of numerical methods in modelling and solving engineering problems.
 Make use of analytical methods to solve higher order differential equations.
 Classify partial differential equations and solve them by exact methods.
 Apply elementary probability theory and solve related problems.

Question Paper Pattern:

 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 43rd Edition, 2015
Reference Books:
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

1. E. Kreyszig, Advanced Engineering Mathematics, John Wiley & Sons, 10th Edition, 2016
2. N.P.Bali and Manish Goyal, A Text Book of Engineering Mathematics, Laxmi Publications, 6th
Edition, 2014
3. RohitKhurana , Engineering Mathematics Vol.I, Cengage Learning, 1st Edition, 2015.

DESIGN AND ANALYSIS OF ALGORITHMS

(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18CS42 CIE Marks 40
Number of Contact Hours/Week 3:2:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –4
Course Learning Objectives: This coursewill enable students to:
 Explain various computational problem solving techniques.
 Apply appropriate method to solve a given problem.
 Describe various methods of algorithm analysis.
Module 1 Contact
Hours
Introduction: What is an Algorithm? (T2:1.1), Algorithm Specification (T2:1.2), Analysis 8
Framework (T1:2.1),Performance Analysis: Space complexity, Time complexity (T2:1.3).
Asymptotic Notations: Big-Oh notation (O), Omega notation (Ω), Theta notation (), and
Little-oh notation (o), Mathematical analysis of Non-Recursive and recursive Algorithms with
Examples (T1:2.2, 2.3, 2.4).Important Problem Types:Sorting, Searching, String processing,
Graph Problems, Combinatorial Problems. Fundamental Data Structures:Stacks, Queues,
Graphs, Trees, Sets and Dictionaries. (T1:1.3,1.4).

RBT: L1, L2, L3

Module 2
Divide and Conquer: General method, Binary search, Recurrence equation for divide and 8
conquer, Finding the maximum and minimum (T2:3.1, 3.3, 3.4), Merge sort, Quick sort (T1:4.1,
4.2), Strassen‟s matrix multiplication (T2:3.8), Advantages and Disadvantages of divide and
conquer. Decrease and Conquer Approach: Topological Sort. (T1:5.3).

RBT: L1, L2, L3

Module 3
Greedy Method: General method, Coin Change Problem, Knapsack Problem, Job sequencing 8
with deadlines (T2:4.1, 4.3, 4.5).Minimum cost spanning trees: Prim‟s Algorithm, Kruskal‟s
Algorithm (T1:9.1, 9.2). Single source shortest paths: Dijkstra's Algorithm (T1:9.3). Optimal
Tree problem:Huffman Trees and Codes (T1:9.4). Transform and Conquer Approach:
Heaps and Heap Sort (T1:6.4).

RBT: L1, L2, L3

Module 4
Dynamic Programming: General method with Examples, Multistage Graphs (T2:5.1, 5.2). 8
Transitive Closure:Warshall‟s Algorithm, All Pairs Shortest Paths:Floyd's Algorithm,
Optimal Binary Search Trees, Knapsack problem ((T1:8.2, 8.3, 8.4), Bellman-Ford Algorithm
(T2:5.4), Travelling Sales Person problem (T2:5.9), Reliability design (T2:5.8).

RBT: L1, L2, L3

Module 5
Backtracking: General method (T2:7.1), N-Queens problem (T1:12.1), Sum of subsets 8
problem (T1:12.1), Graph coloring(T2:7.4), Hamiltonian cycles (T2:7.5). Branch and Bound:
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Assignment Problem, Travelling Sales Person problem (T1:12.2), 0/1 Knapsack problem
(T2:8.2, T1:12.2): LC Branch and Bound solution (T2:8.2), FIFO Branch and Bound solution
(T2:8.2). NP-Complete and NP-Hard problems: Basic concepts, non-deterministic
algorithms, P, NP, NP-Complete, and NP-Hard classes (T2:11.1).

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Describe computational solution to well known problems like searching, sorting etc.
 Estimate the computational complexity of different algorithms.
 Devise an algorithm using appropriate design strategies for problem solving.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Introduction to the Design and Analysis of Algorithms, AnanyLevitin:, 2rd Edition, 2009. Pearson.
2. Computer Algorithms/C++, Ellis Horowitz, SatrajSahni and Rajasekaran, 2nd Edition, 2014,
Universities Press
Reference Books:
1. Introduction to Algorithms, Thomas H. Cormen, Charles E. Leiserson, Ronal L. Rivest, Clifford
Stein, 3rd Edition, PHI.
2. Design and Analysis of Algorithms , S. Sridhar, Oxford (Higher Education).

OPERATING SYSTEMS
(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18CS43 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Introduce concepts and terminology used in OS
 Explain threading and multithreaded systems
 Illustrate process synchronization and concept of Deadlock
 Introduce Memory and Virtual memory management, File system and storage techniques
Module 1 Contact
Hours
Introduction to operating systems, System structures: What operating systems do; Computer 08
System organization; Computer System architecture; Operating System structure; Operating
System operations; Process management; Memory management; Storage management; Protection
and Security; Distributed system; Special-purpose systems; Computing environments. Operating
System Services; User - Operating System interface; System calls; Types of system calls; System
programs; Operating system design and implementation; Operating System structure; Virtual
machines; Operating System generation; System boot. Process Management Process concept;
Process scheduling; Operations on processes; Inter process communication
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Text book 1: Chapter 1, 2.1, 2.3, 2.4, 2.5, 2.6, 2.8, 2.9, 2.10, 3.1, 3.2, 3.3, 3.4

RBT: L1, L2, L3

Module 2
Multi-threaded Programming: Overview; Multithreading models; Thread Libraries; Threading 08
issues. Process Scheduling: Basic concepts; Scheduling Criteria; Scheduling Algorithms;
Multiple-processor scheduling; Thread scheduling. Process Synchronization: Synchronization:
The critical section problem; Peterson‟s solution; Synchronization hardware; Semaphores;
Classical problems of synchronization; Monitors.

Text book 1: Chapter 4.1, 4.2, 4.3, 4.4, 5.1, 5.2, 5.3, 5.4, 5.5, 6.2, 6.3, 6.4, 6.5, 6.6, 6.7

RBT: L1, L2, L3

Module 3
Deadlocks :Deadlocks; System model; Deadlock characterization; Methods for handling 08
deadlocks; Deadlock prevention; Deadlock avoidance; Deadlock detection and recovery from
deadlock. Memory Management: Memory management strategies: Background; Swapping;
Contiguous memory allocation; Paging; Structure of page table; Segmentation.
Text book 1: Chapter 7, 8.1 to 8.6

RBT: L1, L2, L3

Module 4
Virtual Memory Management: Background; Demand paging; Copy-on-write; Page 08
replacement; Allocation of frames; Thrashing. File System, Implementation of File System:
File system: File concept; Access methods; Directory structure; File system mounting; File
sharing; Protection: Implementing File system: File system structure; File system
implementation; Directory implementation; Allocation methods; Free space management.

Text book 1: Chapter 91. To 9.6, 10.1 to 10.5

RBT: L1, L2, L3

Module 5
Secondary Storage Structures, Protection: Mass storage structures; Disk structure; Disk 08
attachment; Disk scheduling; Disk management; Swap space management. Protection: Goals of
protection, Principles of protection, Domain of protection, Access matrix, Implementation of
access matrix, Access control, Revocation of access rights, Capability- Based systems. Case
Study: The Linux Operating System: Linux history; Design principles; Kernel modules;
Process management; Scheduling; Memory Management; File systems, Input and output; Inter-
process communication.

Text book 1: Chapter 12.1 to 12.6, 21.1 to 21.9

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Demonstrate need for OS and different types of OS
 Apply suitable techniques for management of different resources
 Use processor, memory, storage and file system commands
 Realize the different concepts of OS in platform of usage through case studies
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Abraham Silberschatz, Peter Baer Galvin, Greg Gagne, Operating System Principles 7th edition, Wiley-
India, 2006
Reference Books:
1. Ann McHoes Ida M Fylnn, Understanding Operating System, Cengage Learning, 6th Edition
2. D.M Dhamdhere, Operating Systems: A Concept Based Approach 3rd Ed, McGraw- Hill, 2013.
3. P.C.P. Bhatt, An Introduction to Operating Systems: Concepts and Practice 4th Edition, PHI(EEE),
2014.
4. William Stallings Operating Systems: Internals and Design Principles, 6th Edition, Pearson.

MICROCONTROLLER AND EMBEDDED SYSTEMS

(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18CS44 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Understand the fundamentals of ARM based systems, basic hardware components, selection methods
and attributes of an embedded system.
 Program ARM controller using the various instructions
 Identify the applicability of the embedded system
 Comprehend the real time operating system used for the embedded system
Module 1 Contact
Hours
Microprocessors versus Microcontrollers, ARM Embedded Systems: The RISC design 08
philosophy, The ARM Design Philosophy, Embedded System Hardware, Embedded System
Software.
ARM Processor Fundamentals: Registers, Current Program Status Register, Pipeline, Exceptions,
Interrupts, and the Vector Table , Core Extensions
Text book 1: Chapter 1 - 1.1 to 1.4, Chapter 2 - 2.1 to 2.5

RBT: L1, L2
Module 2
Introduction to the ARM Instruction Set : Data Processing Instructions , Branch Instructions, 08
Software Interrupt Instructions, Program Status Register Instructions, Coprocessor Instructions,
Loading Constants
ARM programming using Assembly language: Writing Assembly code, Profiling and cycle
counting, instruction scheduling, Register Allocation, Conditional Execution, Looping Constructs
Text book 1: Chapter 3:Sections 3.1 to 3.6 ( Excluding 3.5.2), Chapter 6(Sections 6.1 to 6.6)
RBT: L1, L2
Module 3
Embedded System Components: Embedded Vs General computing system, History of 08
embedded systems, Classification of Embedded systems, Major applications areas of embedded
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

systems, purpose of embedded systems

Core of an Embedded System including all types of processor/controller, Memory, Sensors,
Actuators, LED, 7 segment LED display, stepper motor, Keyboard, Push button switch,
Communication Interface (onboard and external types), Embedded firmware, Other system
components.
Text book 2:Chapter 1(Sections 1.2 to 1.6),Chapter 2(Sections 2.1 to 2.6)

RBT: L1, L2
Module 4
Embedded System Design Concepts: Characteristics and Quality Attributes of Embedded 08
Systems, Operational quality attributes ,non-operational quality attributes, Embedded Systems-
Application and Domain specific, Hardware Software Co-Design and Program Modelling,
embedded firmware design and development
Text book 2: Chapter-3, Chapter-4, Chapter-7 (Sections 7.1, 7.2 only), Chapter-9 (Sections
9.1, 9.2, 9.3.1, 9.3.2 only)
RBT: L1, L2
Module 5
RTOS and IDE for Embedded System Design: Operating System basics, Types of operating 08
systems, Task, process and threads (Only POSIX Threads with an example program), Thread
preemption, Multiprocessing and Multitasking, Task Communication (without any program),
Task synchronization issues – Racing and Deadlock, Concept of Binary and counting semaphores
(Mutex example without any program), How to choose an RTOS, Integration and testing of
Embedded hardware and firmware, Embedded system Development Environment – Block
diagram (excluding Keil), Disassembler/decompiler, simulator, emulator and debugging
techniques, target hardware debugging, boundary scan.
Text book 2: Chapter-10 (Sections 10.1, 10.2, 10.3, 10.4 , 10.7, 10.8.1.1, 10.8.1.2, 10.8.2.2,
10.10 only), Chapter 12, Chapter-13 ( block diagram before 13.1, 13.3, 13.4, 13.5, 13.6 only)
RBT: L1, L2
Course Outcomes: The student will be able to :
● Describe the architectural features and instructions of ARM microcontroller
● Apply the knowledge gained for Programming ARM for different applications.
● Interface external devices and I/O with ARM microcontroller.
● Interpret the basic hardware components and their selection method based on the characteristics and
attributes of an embedded system.
● Develop the hardware /software co-design and firmware design approaches.
 Demonstrate the need of real time operating system for embedded system applications
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.

Textbooks:
1. Andrew N Sloss, Dominic Symes and Chris Wright, ARM system developers guide, Elsevier, Morgan
Kaufman publishers, 2008.
2. Shibu K V, “Introduction to Embedded Systems”, Tata McGraw Hill Education, Private Limited, 2 nd
Edition.
Reference Books:
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

1. Raghunandan..G.H, Microcontroller (ARM) and Embedded System, Cengage learning

Publication,2019
2. The Insider‟s Guide to the ARM7 Based Microcontrollers, Hitex Ltd.,1st edition, 2005.
3. Steve Furber, ARM System-on-Chip Architecture, Second Edition, Pearson, 2015.
4. Raj Kamal, Embedded System, Tata McGraw-Hill Publishers, 2nd Edition, 2008.

OBJECT ORIENTED CONCEPTS

(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18CS45 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Learn fundamental features of object oriented language and JAVA
 Set up Java JDK environment to create, debug and run simple Java programs.
 Create multi-threaded programs and event handling mechanisms.
 Introduce event driven Graphical User Interface (GUI) programming using applets and swings.
Module 1 Contact
Hours
Introduction to Object Oriented Concepts: 08
A Review of structures, Procedure–Oriented Programming system, Object Oriented
Programming System, Comparison of Object Oriented Language with C, Console I/O, variables
and reference variables, Function Prototyping, Function Overloading. Class and Objects:
Introduction, member functions and data, objects and functions.

Text book 1: Ch 1: 1.1 to 1.9 Ch 2: 2.1 to 2.3

RBT: L1, L2
Module 2
Class and Objects (contd): 08
Objects and arrays, Namespaces, Nested classes, Constructors, Destructors.
Introduction to Java: Java‟s magic: the Byte code; Java Development Kit (JDK); the Java
Buzzwords, Object-oriented programming; Simple Java programs. Data types, variables and
arrays, Operators, Control Statements.

Text book 1:Ch 2: 2.4 to 2.6Ch 4: 4.1 to 4.2

Text book 2: Ch:1 Ch: 2 Ch:3 Ch:4 Ch:5
RBT: L1, L2
Module 3
Classes, Inheritance,Exception Handling: Classes: Classes fundamentals; Declaring objects; 08
Constructors, this keyword, garbage collection. Inheritance: inheritance basics, using super,
creating multi level hierarchy, method overriding. Exception handling: Exception handling in
Java.
Text book 2: Ch:6 Ch: 8 Ch:10

RBT: L1, L2, L3

Module 4
Packages and Interfaces:Packages, Access Protection,ImportingPackages.Interfaces. 08
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Multi ThreadedProgramming:Multi Threaded Programming: What are threads? How to make

the classes threadable ; Extending threads; Implementing runnable; Synchronization; Changing
state of the thread; Bounded buffer problems, producer consumer problems.
Text book 2: CH: 9 Ch 11:

RBT: L1, L2, L3

Module 5
Event Handling: Two event handling mechanisms; The delegation event model; Event classes; 08
Sources of events; Event listener interfaces; Using the delegation event model; Adapter classes;
Inner classes.
Swings: Swings: The origins of Swing; Two key Swing features; Components and Containers;
The Swing Packages; A simple Swing Application; Create a Swing Applet; Jlabel and
ImageIcon; JTextField;The Swing Buttons; JTabbedpane; JScrollPane; JList; JComboBox;
JTable.
Text book 2: Ch 22: Ch: 29 Ch: 30

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Explain the object-oriented concepts and JAVA.
 Develop computer programs to solve real world problems in Java.
 Develop simple GUI interfaces for a computer program to interact with users, and to understand the
event-based GUI handling principles using swings.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Sourav Sahay, Object Oriented Programming with C++ , 2nd Ed, Oxford University Press,2006
2. Herbert Schildt, Java The Complete Reference, 7th Edition, Tata McGraw Hill, 2007.

Reference Books:
1. Mahesh Bhave and Sunil Patekar, "Programming with Java", First Edition, Pearson Education,2008,
ISBN:9788131720806
2. Herbert Schildt, The Complete Reference C++, 4th Edition, Tata McGraw Hill, 2003.
3. Stanley B.Lippmann, JoseeLajore, C++ Primer, 4th Edition, Pearson Education, 2005.
4. RajkumarBuyya,SThamarasiselvi, xingchenchu, Object oriented Programming with java, Tata McGraw
Hill education private limited.
5. Richard A Johnson, Introduction to Java Programming and OOAD, CENGAGE Learning.
6. E Balagurusamy, Programming with Java A primer, Tata McGraw Hill companies.
Mandatory Note: Every institute shall organize bridge course on C++, either in the vacation or in the
beginning of even semester for a minimum period of ten days (2hrs/day). Maintain a copy of the report
for verification during LIC visit.
Faculty can utilize open source tools to make teaching and learning more interactive.

DATA COMMUNICATION
(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18CS46 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

CREDITS –3
Course Learning Objectives: This course will enable students to:
 Comprehend the transmission technique of digital data between two or more computers and a computer
network that allows computers to exchange data.
 Explain with the basics of data communication and various types of computer networks;
 Demonstrate Medium Access Control protocols for reliable and noisy channels.
 Expose wireless and wired LANs.
Module 1 Contact
Hours
Introduction: Data Communications, Networks, Network Types, Internet History, Standards 08
and Administration, Networks Models: Protocol Layering, TCP/IP Protocol suite, The OSI
model, Introduction to Physical Layer-1: Data and Signals, Digital Signals, Transmission
Impairment, Data Rate limits, Performance.

Textbook1: Ch 1.1 to 1.5, 2.1 to 2.3, 3.1, 3.3 to 3.6

RBT: L1, L2
Module 2
Digital Transmission: Digital to digital conversion (Only Line coding: Polar, Bipolar and 08
Manchester coding).
Physical Layer-2: Analog to digital conversion (only PCM), Transmission Modes,
Analog Transmission: Digital to analog conversion.

Textbook1: Ch 4.1 to 4.3, 5.1

RBT: L1, L2
Module 3
Bandwidth Utilization: Multiplexing and Spread Spectrum, 08
Switching: Introduction, Circuit Switched Networks and Packet switching.
Error Detection and Correction: Introduction, Block coding, Cyclic codes, Checksum,

Textbook1: Ch 6.1, 6.2, 8.1 to 8.3, 10.1 to 10.4

RBT: L1, L2
Module 4
Data link control: DLC services, Data link layer protocols, Point to Point protocol (Framing, 08
Transition phases only).
Media Access control: Random Access, Controlled Access and Channelization,
Introduction to Data-Link Layer: Introduction, Link-Layer Addressing, ARP
IPv4 Addressing and subnetting: Classful and CIDR addressing, DHCP, NAT

Textbook1: Ch 9.1, 9.2, 11.1, 11.2 11.4, 12.1 to 12.3, 18.4

RBT: L1, L2
Module 5
Wired LANs Ethernet: Ethernet Protocol, Standard Ethernet, Fast Ethernet, Gigabit Ethernet 08
and 10 Gigabit Ethernet,
Wireless LANs: Introduction, IEEE 802.11 Project and Bluetooth.
Other wireless Networks: Cellular Telephony

Textbook1: Ch 13.1 to 13.5, 15.1 to 15.3, 16.2

 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1, L2
Course Outcomes: The student will be able to :
 Explain the various components of data communication.
 Explain the fundamentals of digital communication and switching.
 Compare and contrast data link layer protocols.
 Summarize IEEE 802.xx standards
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Behrouz A. Forouzan, Data Communications and Networking 5E, 5th Edition, Tata McGraw-Hill, 2013.
Reference Books:
1. Alberto Leon-Garcia and IndraWidjaja: Communication Networks - Fundamental Concepts and Key
architectures, 2nd Edition Tata McGraw-Hill, 2004.
2. William Stallings: Data and Computer Communication, 8th Edition, Pearson Education, 2007.
3. Larry L. Peterson and Bruce S. Davie: Computer Networks – A Systems Approach, 4th Edition,
Elsevier, 2007.
4. Nader F. Mir: Computer and Communication Networks, Pearson Education, 2007.

DESIGN AND ANALYSIS OF ALGORITHMS LABORATORY

(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18CSL47 CIE Marks 40
Number of Contact Hours/Week 0:2:2 SEE Marks 60
Total Number of Lab Contact Hours 36 Exam Hours 3 Hrs
Credits – 2
Course Learning Objectives: This course will enable students to:
 Design and implement various algorithms in JAVA
 Employ various design strategies for problem solving.
 Measure and compare the performance of different algorithms.
Descriptions (if any):
 Design, develop, and implement the specified algorithms for the following problems using Java
language under LINUX /Windows environment. Netbeans / Eclipse or IntellijIdea Community Edition
IDE tool can be used for development and demonstration.
 Installation procedure of the required software must be demonstrated, carried out in groups and
documented in the journal.
Programs List:
1.
a. Create a Java class called Studentwith the following details as variables within it.
(i) USN
(ii) Name
(iii) Branch
(iv) Phone
Write a Java program to create nStudent objects and print the USN, Name, Branch, and Phoneof
these objects with suitable headings.

b. Write a Java program to implement the Stack using arrays. Write Push(), Pop(), and Display()
methods to demonstrate its working.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

2.
a. Design a superclass called Staff with details as StaffId, Name, Phone, Salary. Extend this class
by writing three subclasses namely Teaching (domain, publications), Technical (skills), and
Contract (period). Write a Java program to read and display at least 3 staff objects of all three
categories.

b. Write a Java class called Customer to store their name and date_of_birth. The date_of_birth
format should be dd/mm/yyyy. Write methods to read customer data as <name, dd/mm/yyyy>
and display as <name, dd, mm, yyyy> using StringTokenizer class considering the delimiter
character as “/”.

3.
a. Write a Java program to read two integers aandb. Compute a/b and print, when b is not zero.
Raise an exception when b is equal to zero.

b. Write a Java program that implements a multi-thread application that has three threads. First
thread generates a random integer for every 1 second; second thread computes the square of the
number andprints; third thread will print the value of cube of the number.

4. Sort a given set of n integer elements using Quick Sort method and compute its time
complexity. Run the program for varied values of n> 5000 and record the time taken to sort. Plot
a graph of the time taken versus non graph sheet. The elements can be read from a file or can be
generated using the random number generator. Demonstrate using Java how the divide-and-
conquer method works along with its time complexity analysis: worst case, average case and
best case.

5. Sort a given set of n integer elements using Merge Sort method and compute its time
complexity. Run the program for varied values of n> 5000, and record the time taken to sort. Plot
a graph of the time taken versus non graph sheet. The elements can be read from a file or can be
generated using the random number generator. Demonstrate using Java how the divide-and-
conquer method works along with its time complexity analysis: worst case, average case and
best case.

6. Implement in Java, the 0/1 Knapsack problem using (a) Dynamic Programming method (b)
Greedy method.

7. From a given vertex in a weighted connected graph, find shortest paths to other vertices using
Dijkstra's algorithm. Write the program in Java.

8. Find Minimum Cost Spanning Tree of a given connected undirected graph using
Kruskal'salgorithm. Use Union-Find algorithms in your program

9. Find Minimum Cost Spanning Tree of a given connected undirected graph using
Prim's algorithm.

10. Write Java programs to

(a) Implement All-Pairs Shortest Paths problem using Floyd's algorithm.
(b) Implement Travelling Sales Person problem using Dynamic programming.

11. Design and implement in Java to find a subset of a given set S = {Sl, S2,.....,Sn} of n positive
integers whose SUM is equal to a given positive integer d. For example, if S ={1, 2, 5, 6, 8} and
d= 9, there are two solutions {1,2,6}and {1,8}. Display a suitable message, if the given problem
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

instance doesn't have a solution.

12. Design and implement in Java to find all Hamiltonian Cycles in a connected undirected Graph G
of n vertices using backtracking principle.

Laboratory Outcomes: The student should be able to:

 Design algorithms using appropriate design techniques (brute-force, greedy, dynamic programming,
etc.)
 Implement a variety of algorithms such assorting, graph related, combinatorial, etc., in a high level
language.
 Analyze and compare the performance of algorithms using language features.
 Apply and implement learned algorithm design techniques and data structuresto solve real-world
problems.
Conduct of Practical Examination:
 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the
lot with equal opportunity.
o For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accoradance with university regulations)
e) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks
f) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks

MICROCONTROLLER AND EMBEDDED SYSTEMS LABORATORY

(Effective from the academic year 2018 -2019)
SEMESTER – IV
Subject Code 18CSL48 CIE Marks 40
Number of Contact Hours/Week 0:2:2 SEE Marks 60
Total Number of Lab Contact Hours 36 Exam Hours 3 Hrs
Credits – 2
Course Learning Objectives: This course will enable students to:
 Develop and test Program using ARM7TDMI/LPC2148
 Conduct the experiments on an ARM7TDMI/LPC2148 evaluation board using evaluation version of
Embedded 'C' &Keil Uvision-4 tool/compiler.
Descriptions (if any):

Programs List:
PART A Conduct the following experiments by writing program using ARM7TDMI/LPC2148 using an
evaluation board/simulator and the required software tool.
1. Write a program to multiply two 16 bit binary numbers.
2. Write a program to find the sum of first 10 integer numbers.
3. Write a program to find factorial of a number.
4. Write a program to add an array of 16 bit numbers and store the 32 bit result in internal RAM
5. Write a program to find the square of a number (1 to 10) using look-up table.
6. Write a program to find the largest/smallest number in an array of 32 numbers .
7. Write a program to arrange a series of 32 bit numbers in ascending/descending order.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

8. Write a program to count the number of ones and zeros in two consecutive memory locations.
PART –B Conduct the following experiments on an ARM7TDMI/LPC2148 evaluation board using evaluation
version of Embedded 'C' &Keil Uvision-4 tool/compiler.
9. Display “Hello World” message using Internal UART.
10. Interface and Control a DC Motor.
11. Interface a Stepper motor and rotate it in clockwise and anti-clockwise direction.
12. Determine Digital output for a given Analog input using Internal ADC of ARM controller.
13. Interface a DAC and generate Triangular and Square waveforms.
14. Interface a 4x4 keyboard and display the key code on an LCD.
15. Demonstrate the use of an external interrupt to toggle an LED On/Off.
16. Display the Hex digits 0 to F on a 7-segment LED interface, with an appropriate delay in between
Laboratory Outcomes: The student should be able to:
 Develop and test program using ARM7TDMI/LPC2148
 Conduct the following experiments on an ARM7TDMI/LPC2148 evaluation board using evaluation
version of Embedded 'C' &Keil Uvision-4 tool/compiler.

Conduct of Practical Examination:

 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the lot
with equal opportunity.
o For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accoradance with university regulations)
g) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks
h) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks

MANAGEMENT AND ENTREPRENEURSHIP FOR IT INDUSTRY

(Effective from the academic year 2018 -2019)
SEMESTER – V
Subject Code 18CS51 CIE Marks 40
Number of Contact Hours/Week 2:2:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 Explain the principles of management, organization and entrepreneur.
 Discuss on planning, staffing, ERP and their importance
 Infer the importance of intellectual property rights and relate the institutional support
Module – 1 CH
Introduction - Meaning, nature and characteristics of management, scope and Functional areas of 08
management, goals of management, levels of management, brief overview of evolution of management
theories,. Planning- Nature, importance, types of plans, steps in planning, Organizing- nature and purpose,
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

types of Organization, Staffing- meaning, process of recruitment and selection

RBT: L1, L2
Module – 2
Directing and controlling- meaning and nature of directing, leadership styles, motivationTheories, 08
Communication- Meaning and importance, Coordination- meaning andimportance, Controlling- meaning,
steps in controlling, methods of establishing control.

RBT: L1, L2
Module – 3
Entrepreneur – meaning of entrepreneur, characteristics of entrepreneurs, classification and types of 08
entrepreneurs, various stages in entrepreneurial process, role of entrepreneurs in economic development,
entrepreneurship in India and barriers to entrepreneurship. Identification of business opportunities, market
feasibility study, technical feasibility study, financial feasibility study and social feasibility study.

RBT: L1, L2
Module – 4
Preparation of project and ERP - meaning of project, project identification, project selection, project 08
report, need and significance of project report, contents,
formulation, guidelines by planning commission for project report, Enterprise Resource Planning:
Meaning and Importance- ERP and Functional areas of Management – Marketing / Sales- Supply Chain
Management – Finance and Accounting – Human Resources – Types of reports and methods of report
generation

RBT: L1, L2
Module 5
Micro and Small Enterprises: Definition of micro and small enterprises, characteristics and advantages
of micro and small enterprises, steps in establishing micro and small enterprises, Government of India
indusial policy 2007 on micro and small enterprises, case study (Microsoft), Case study(Captain G R
Gopinath),case study (N R Narayana Murthy &Infosys), Institutional support: MSME-DI, NSIC,
SIDBI, KIADB, KSSIDC, TECSOK, KSFC, DIC and District level single window agency, Introduction
to IPR.

RBT: L1, L2
Course outcomes: The students should be able to:
 Define management, organization, entrepreneur, planning, staffing, ERP and outline their importance in
entrepreneurship
 Utilize the resources available effectively through ERP
 Make use of IPRs and institutional support in entrepreneurship
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Principles of Management -P. C. Tripathi, P. N. Reddy; Tata McGraw Hill, 4th / 6th Edition, 2010.
2. Dynamics of Entrepreneurial Development & Management -Vasant Desai Himalaya Publishing House.
3. Entrepreneurship Development -Small Business Enterprises -Poornima M Charantimath Pearson
Education – 2006.
4. Management and Entrepreneurship - KanishkaBedi- Oxford University Press-2017
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Reference Books:
1. Management Fundamentals -Concepts, Application, Skill Development Robert Lusier – Thomson.
2. Entrepreneurship Development -S S Khanka -S Chand & Co.
3. Management -Stephen Robbins -Pearson Education /PHI -17th Edition, 2003

PYTHON PROGRAMMING
[(Effective from the academic year 2018 -2019)
SEMESTER – V

Subject Code 18AI52 IA Marks 40

Number of Lecture Hours/Week 3:2:0 Exam Marks 60
Total Number of Lecture Hours 50 Exam Hours 03
CREDITS – 04
Course Objectives:This course will enable students to
 Learn the syntax and semantics of Python programming language.
 Illustrate the process of structuring the data using lists, tuples and dictionaries.
 Demonstrate the use of built-in functions to navigate the file system.
 Implement the Object Oriented Programming concepts in Python.
 Appraise the need for working with various documents like Excel, PDF, Word and Others.
Module – 1 Contac
t
Hours
Python Basics, Entering Expressions into the Interactive Shell, The Integer, Floating-Point, and 10
String Data Types, String Concatenation and Replication, Storing Values in Variables, Your First
Program, Dissecting Your Program,Flow control, Boolean Values, Comparison Operators, Boolean
Operators,Mixing Boolean and Comparison Operators, Elements of Flow Control, Program
Execution, Flow Control Statements, Importing Modules,Ending a Program Early with sys.exit(),
Functions,def Statements with Parameters, Return Values and return Statements,The None Value,
Keyword Arguments and print(), Local and Global Scope, The global Statement, Exception
Handling, A Short Program: Guess the Number
Textbook 1: Chapters 1 – 3
RBT: L1, L2
Module – 2
Lists, The List Data Type, Working with Lists, Augmented Assignment Operators, Methods, 10
Example Program: Magic 8 Ball with a List, List-like Types: Strings and Tuples,References,
Dictionaries and Structuring Data, The Dictionary Data Type, Pretty Printing, Using Data
Structures to Model Real-World Things, Manipulating Strings, Working with Strings, Useful
String Methods, Project: Password Locker, Project: Adding Bullets to Wiki Markup
Textbook 1: Chapters 4 – 6
RBT: L1, L2, L3
Module – 3
Pattern Matching with Regular Expressions, Finding Patterns of Text Without Regular 10
Expressions, Finding Patterns of Text with Regular Expressions,More Pattern Matching with
Regular Expressions, Greedy and Nongreedy Matching, The findall() Method, Character Classes,
Making Your Own Character Classes, The Caret and Dollar Sign Characters, The Wildcard
Character, Review of Regex Symbols, Case-Insensitive Matching, Substituting Strings with the
sub() Method, Managing Complex Regexes, Combining re .IGNORECASE, re .DOTALL, and re
.VERBOSE, Project: Phone Number and Email Address Extractor, Reading and Writing Files,
Files and File Paths, The os.path Module, The File Reading/Writing Process, Saving Variables with
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

the shelve Module,Saving Variables with the pprint.pformat() Function, Project: Generating
Random Quiz Files, Project: Multiclipboard.
Textbook 1: Chapters 7 – 10
RBT: L1, L2, L3
Module – 4
Classes and objects, Programmer-defined types, Attributes, Rectangles, Instances as return values, 10
Objects are mutable, Copying, Classes and functions, Time, Pure functions, Modifiers, Prototyping
versus planning, Classes and methods, Object-oriented features, Printing objects, Another example,
A more complicated example,Theinit method, The __str__ method, Operator overloading, Type-
based dispatch, Polymorphism, Interface and implementation,Inheritance, Card objects, Class
attributes, Comparing cards, Decks, Printing the deck, Add, remove, shuffle and sort, Inheritance,
Class diagrams, Data encapsulation
Textbook 2: Chapters 15 – 18
RBT: L1, L2, L3

Module – 5
Web Scraping, Project: MAPIT.PY with the webbrowser Module, Downloading Files from the 10
Web with the requests Module, Saving Downloaded Files to the Hard Drive, HTML, Parsing HTML
with the BeautifulSoup Module, Project: “I‟m Feeling Lucky” Google Search,Project: Downloading
All XKCD Comics, Controlling the Browser with the selenium Module, Working with Excel
Spreadsheets, Excel Documents, Installing the openpyxl Module, Reading Excel Documents,
Project: Reading Data from a Spreadsheet, Writing Excel Documents, Project: Updating a
Spreadsheet, Setting the Font Style of Cells, Font Objects, Formulas, Adjusting Rows and Columns,
Charts, Working with PDF and Word Documents, PDF Documents, Project: Combining Select
Pages from Many PDFs, Word Documents, Working with CSV files and JSON data, The csv
Module, Project: Removing the Header from CSV Files, JSON and APIs, The json Module, Project:
Fetching Current Weather Data
Textbook 1: Chapters 11 – 14
RBT: L1, L2, L3

Course Outcomes: After studying this course, students will be able to

 Demonstrate proficiency in handling of loops and creation of functions.
 Identify the methods to create and manipulate lists, tuples and dictionaries.
 Discover the commonly used operations involving regular expressions and file system.
 Interpret the concepts of Object-Oriented Programming as used in Python.
 Determine the need for scraping websites and working with CSV, JSON and other file formats.
Question paper pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Text Books:
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

1. Al Sweigart,“Automate the Boring Stuff with Python”,1stEdition, No Starch Press, 2015. (Available
under CC-BY-NC-SA license at https://automatetheboringstuff.com/)
(Chapters 1 to 18)
2. Allen B. Downey, “Think Python: How to Think Like a Computer Scientist”, 2nd Edition, Green
Tea Press, 2015. (Available under CC-BY-NC license at
http://greenteapress.com/thinkpython2/thinkpython2.pdf)
(Chapters 13, 15, 16, 17, 18) (Download pdf/html files from the above links)
Reference Books:
1. Jake VanderPlas, “Python Data Science Handbook: Essential Tools for Working with Data”, 1st
Edition, O‟Reilly Media, 2016. ISBN-13: 978-1491912058
2. Charles Dierbach, “Introduction to Computer Science Using Python”, 1st Edition, Wiley India Pvt
Ltd, 2015. ISBN-13: 978-8126556014
3. Wesley J Chun, “Core Python Applications Programming”, 3rd Edition, Pearson Education India,
2015. ISBN-13: 978-9332555365
4. Gourishankar S, Veena A. “ Introduction to python programming “ 1st edition, CRC press/ Tylor &
Francis, 2018, ISBN-13:978-0815394372
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

DATABASE MANAGEMENT SYSTEM

(Effective from the academic year 2018 -2019)
SEMESTER – V
Subject Code 18CS53 CIE Marks 40
Number of Contact Hours/Week 3:2:0 SEE Marks 60
Total Number of Contact Hours 50 Exam Hours 3 Hrs
CREDITS –4
Course Learning Objectives: This course will enable students to:
 Provide a strong foundation in database concepts, technology, and practice.
 Practice SQL programming through a variety of database problems.
 Demonstrate the use of concurrency and transactions in database
 Design and build database applications for real world problems.
Module 1 Contact
Hours
Introduction to Databases: Introduction, Characteristics of database approach, Advantages of 10
using the DBMS approach, History of database applications. Overview of Database Languages
and Architectures: Data Models, Schemas, and Instances. Three schema architecture and data
independence, database languages, and interfaces, The Database System environment. Conceptual
Data Modelling using Entities and Relationships: Entity types, Entity sets, attributes, roles, and
structural constraints, Weak entity types, ER diagrams, examples, Specialization and
Generalization.

Textbook 1:Ch 1.1 to 1.8, 2.1 to 2.6, 3.1 to 3.10

RBT: L1, L2, L3
Module 2
Relational Model: Relational Model Concepts, Relational Model Constraints and relational 10
database schemas, Update operations, transactions, and dealing with constraint violations.
Relational Algebra: Unary and Binary relational operations, additional relational operations
(aggregate, grouping, etc.) Examples of Queries in relational algebra. Mapping Conceptual Design
into a Logical Design: Relational Database Design using ER-to-Relational mapping. SQL: SQL
data definition and data types, specifying constraints in SQL, retrieval queries in SQL, INSERT,
DELETE, and UPDATE statements in SQL, Additional features of SQL.
Textbook 1: Ch4.1 to 4.5, 5.1 to 5.3, 6.1 to 6.5, 8.1; Textbook 2: 3.5
RBT: L1, L2, L3
Module 3
SQL : Advances Queries: More complex SQL retrieval queries, Specifying constraints as 10
assertions and action triggers, Views in SQL, Schema change statements in SQL. Database
Application Development: Accessing databases from applications, An introduction to JDBC,
JDBC classes and interfaces, SQLJ, Stored procedures, Case study: The internet Bookshop.
Internet Applications: The three-Tier application architecture, The presentation layer, The Middle
Tier
Textbook 1: Ch7.1 to 7.4; Textbook 2: 6.1 to 6.6, 7.5 to 7.7.
RBT: L1, L2, L3

Module 4
Normalization: Database Design Theory – Introduction to Normalization using Functional and 10
Multivalued Dependencies: Informal design guidelines for relation schema, Functional
Dependencies, Normal Forms based on Primary Keys, Second and Third Normal Forms, Boyce-
Codd Normal Form, Multivalued Dependency and Fourth Normal Form, Join Dependencies and
Fifth Normal Form. Normalization Algorithms: Inference Rules, Equivalence, and Minimal
Cover, Properties of Relational Decompositions, Algorithms for Relational Database Schema
Design, Nulls, Dangling tuples, and alternate Relational Designs, Further discussion of Multivalued
dependencies and 4NF, Other dependencies and Normal Forms
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Textbook 1: Ch14.1 to 14.7, 15.1 to 15.6

RBT: L1, L2, L3
Module 5
Transaction Processing: Introduction to Transaction Processing, Transaction and System 10
concepts, Desirable properties of Transactions, Characterizing schedules based on recoverability,
Characterizing schedules based on Serializability, Transaction support in SQL. Concurrency
Control in Databases: Two-phase locking techniques for Concurrency control, Concurrency
control based on Timestamp ordering, Multiversion Concurrency control techniques, Validation
Concurrency control techniques, Granularity of Data items and Multiple Granularity Locking.
Introduction to Database Recovery Protocols: Recovery Concepts, NO-UNDO/REDO recovery
based on Deferred update, Recovery techniques based on immediate update, Shadow paging,
Database backup and recovery from catastrophic failures
Textbook 1: 20.1 to 20.6, 21.1 to 21.7, 22.1 to 22.4, 22.7.
RBT: L1, L2, L3
Course Outcomes: The student will be able to :
 Identify, analyze and define database objects, enforce integrity constraints on a database using
RDBMS.
 Use Structured Query Language (SQL) for database manipulation.
 Design and build simple database systems
 Develop application to interact with databases.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Fundamentals of Database Systems, RamezElmasri and Shamkant B. Navathe, 7th Edition, 2017,
Pearson.
2. Database management systems, Ramakrishnan, and Gehrke, 3rd Edition, 2014, McGraw Hill
Reference Books:
1. SilberschatzKorth and Sudharshan, Database System Concepts, 6th Edition, Mc-GrawHill, 2013.
2. Coronel, Morris, and Rob, Database Principles Fundamentals of Design, Implementation and
Management, Cengage Learning 2012.

AUTOMATA THEORY AND COMPUTABILITY

(Effective from the academic year 2018 -2019)
SEMESTER – V
Subject Code 18CS54 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Introduce core concepts in Automata and Theory of Computation
 Identify different Formal language Classes and their Relationships
 Design Grammars and Recognizers for different formal languages
 Prove or disprove theorems in automata theory using their properties
 Determine the decidability and intractability of Computational problems
Module 1 Contact
Hours
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Why study the Theory of Computation, Languages and Strings: Strings, Languages. A 08
Language Hierarchy, Computation, Finite State Machines (FSM): Deterministic FSM, Regular
languages, Designing FSM, Nondeterministic FSMs, From FSMs to Operational Systems,
Simulators for FSMs, Minimizing FSMs, Canonical form of Regular languages, Finite State
Transducers, Bidirectional Transducers.
Textbook 1: Ch 1,2, 3,4, 5.1 to 5.10
RBT: L1, L2
Module 2
Regular Expressions (RE): what is a RE?, Kleene‟s theorem, Applications of REs, Manipulating 08
and Simplifying REs. Regular Grammars: Definition, Regular Grammars and Regular languages.
Regular Languages (RL) and Non-regular Languages: How many RLs, To show that a language is
regular, Closure properties of RLs, to show some languages are not RLs.
Textbook 1: Ch 6, 7, 8: 6.1 to 6.4, 7.1, 7.2, 8.1 to 8.4
RBT: L1, L2, L3
Module 3
Context-Free Grammars(CFG): Introduction to Rewrite Systems and Grammars, CFGs and 08
languages, designing CFGs, simplifying CFGs, proving that a Grammar is correct, Derivation and
Parse trees, Ambiguity, Normal Forms. Pushdown Automata (PDA): Definition of non-
deterministic PDA, Deterministic and Non-deterministic PDAs, Non-determinism and Halting,
alternative equivalent definitions of a PDA, alternatives that are not equivalent to PDA.
Textbook 1: Ch 11, 12: 11.1 to 11.8, 12.1, 12.2, 12,4, 12.5, 12.6
RBT: L1, L2, L3
Module 4
Algorithms and Decision Procedures for CFLs: Decidable questions, Un-decidable questions. 08
Turing Machine: Turing machine model, Representation, Language acceptability by TM, design of
TM, Techniques for TM construction. Variants of Turing Machines (TM), The model of Linear
Bounded automata.
Textbook 1: Ch 14: 14.1, 14.2, Textbook 2: Ch 9.1 to 9.8
RBT: L1, L2, L3
Module 5
Decidability: Definition of an algorithm, decidability, decidable languages, Undecidable languages, 08
halting problem of TM, Post correspondence problem. Complexity: Growth rate of functions, the
classes of P and NP, Quantum Computation: quantum computers, Church-Turing thesis.
Applications: G.1 Defining syntax of programming language, Appendix J: Security
Textbook 2: 10.1 to 10.7, 12.1, 12.2, 12.8, 12.8.1, 12.8.2
Textbook 1: Appendix: G.1(only), J.1 & J.2
RBT: L1, L2, L3
Course Outcomes: The student will be able to :
 Acquire fundamental understanding of the core concepts in automata theory and Theory of
Computation
 Learn how to translate between different models of Computation (e.g., Deterministic and Non-
deterministic and Software models).
 Design Grammars and Automata (recognizers) for different language classes and become
knowledgeable about restricted models of Computation (Regular, Context Free) and their relative
powers.
 Develop skills in formal reasoning and reduction of a problem to a formal model, with an emphasis
on semantic precision and conciseness.
 Classify a problem with respect to different models of Computation.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Elaine Rich, Automata, Computability and Complexity, 1st Edition, Pearson education,2012/2013
2. K L P Mishra, N Chandrasekaran , 3rd Edition, Theory of Computer Science, PhI, 2012.
Reference Books:
1. John E Hopcroft, Rajeev Motwani, Jeffery D Ullman, Introduction to AutomataTheory, Languages, and
Computation, 3rd Edition, Pearson Education, 2013
2. Michael Sipser : Introduction to the Theory of Computation, 3rd edition, Cengage learning,2013
3. John C Martin, Introduction to Languages and The Theory of Computation, 3rd Edition, Tata McGraw –
Hill Publishing Company Limited, 2013
4. Peter Linz, “An Introduction to Formal Languages and Automata”, 3rd Edition, NarosaPublishers, 1998
5. Basavaraj S. Anami, Karibasappa K G, Formal Languages and Automata theory, Wiley India, 2012
6. C K Nagpal, Formal Languages and Automata Theory, Oxford University press, 2012.
Faculty can utilize open source tools (like JFLAP) to make teaching and learning more interactive.

PRINCIPLES OF ARTIFICIAL INTELLIGENCE

(Effective from the academic year 2018 -2019)
SEMESTER – V
Subject Code 18AI55 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
1.Gain a historical perspective of AI and its foundations.
2. Become familiar with basic principles of AI toward problem solving
3. Get to know approaches of inference, perception, knowledge representation, and learning.

Module – 1 CH
Introduction to AI: history, Intelligent systems, foundation and sub area of AI , applications, current trend 08
and development of AI. Problem solving: state space search and control strategies.

Chapter 1 and 2

RBT: L1, L2

Module – 2
Problem reduction and Game playing : Problem reduction, game playing, Bounded look-ahead strategy, 08
alpha-beta pruning, Two player perfect information games

Chapter 3

RBT: L1, L2

Module – 3
Logic concepts and logic Programming: propositional calculus, Propositional logic, natural deduction 08
system, semantic tableau system, resolution refutation, predicate logic, Logic programming.

Chapter 4
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1, L2

Module – 4
Advanced problem solving paradigm: Planning: types of planning sytem, block world problem, logic 08
based planning, Linear planning using a goal stack, Means-ends analysis, Non linear planning strategies,
learning plans

Chapter 6

RBT: L1, L2

Module – 5
Knowledge Representation , Expert system 08
Approaches to knowledge representation, knowledge representation using semantic network, extended
semantic networks for KR, Knowledge representation using Frames.
Expert system: introduction phases, architecture ES verses Traditional system

Chapter 7 and 8 ( 8.1 to 8.4)

RBT: L1, L2

Course outcomes: The students should be able to:

 Apply the knowledge of Artificial Intelligence to write simple algorithm for agents.
 Apply the AI knowledge to solve problem on search algorithm.
 Develop knowledge base sentences using propositional logic and first order logic.
 Apply first order logic to solve knowledge engineering process.

Question Paper Pattern:

 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Saroj Kaushik, Artificial Intelligence, Cengage learning, 2014
Reference Books:
1. Elaine Rich, Kevin Knight, Artificial Intelligence, Tata McGraw Hill
2. Nils J. Nilsson, Principles of Artificial Intelligence, Elsevier, 1980
3. StaurtRussel, Peter Norvig, Artificial Intelligence: A Modern Approach, Pearson Education, 3rd Edition,
2009
4. George F Lugar, Artificial Intelligence Structure and strategies for complex, Pearson Education, 5th
Edition, 2011
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

MATHEMATICS FOR DATA SCIENCE

(Effective from the academic year 2018 -2019)
SEMESTER – V
Subject Code 18AD56 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:

1. To provide students with a framework that will help them choose the appropriate descriptive
methods in various data analysis situations.
2. To analyze distributions and relationships of real-time data.
3. To apply estimation and testing methods to make inference and modeling techniques

Module-1

Introduction- A Simple Example of a Research Problem, Discrepancies Between Real and Ideal
Research Situations, Samples and Populations, Descriptive Versus Inferential Uses of Statistics,
Levels of Measurement and Types of Variables.
Basic Statistics, Sampling Error, and Confidence Intervals-Introduction, Research Example:
Description of a Sample of HR Scores , Sample Mean (M) , Sum of Squared Deviations (SS) and
Sample Variance (s2), Degrees of Freedom (df) for a Sample Variance , Why Is There Variance? ,
Sample Standard Deviation (s), Assessment of Location of a Single X Score Relative to a
Distribution of Scores.

Text book 1: Chapter 1, Chapter 2

RBT: L1, L2, L3

Module-2

Preliminary Data Screening- Introduction: Problems in Real Data, Quality Control During Data
Collection, Example of an SPSS Data Worksheet, Identification of Errors and Inconsistencies,
Missing Values, Empirical Example of Data Screening for Individual Variables, Frequency
Distribution Tables, Removal of Impossible or Extreme Scores, Bar Chart for a Categorical Variable,
Histogram for a Quantitative Variable, Identification and Handling of Outliers, Screening Data for
Bivariate Analyses, Bivariate Data Screening for Two Categorical Variables, Bivariate Data
Screening for One Categorical and One Quantitative Variable, Bivariate Data Screening for Two
Quantitative Variables, Nonlinear Relations
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Text book 1 : Chapter 4 (4.1 to 4.9)

RBT: L1, L2, L3

Module-3

Bivariate Pearson Correlation- Research Situations Where Pearson‟s r Is Used, Hypothetical

Research Example, Assumptions for Pearson‟s r, Preliminary Data Screening , Design Issues in
Planning Correlation Research, Computation of Pearson‟s , Statistical Significance Tests for
Pearson‟s r, Testing the Hypothesis That rXY = 0, Testing Other Hypotheses About rXY, Assessing
Differences Between Correlations, Reporting Many Correlations: Need to Control, Inflated Risk of
Type I Error, Limiting the Number of Correlations, Cross-Validation of Correlations, Bonferroni
Procedure: A More Conservative, Alpha Level for Tests of Individual Correlations, Setting Up CIs
for Correlations

Text book 1 : Chapter 5 (5.1 to 5.4), Chapter 7(7.1 to 7.7, 10.15.4)

RBT: L1, L2, L3

Module-4

Bivariate Regression- Research Situations Where Bivariate Regression Is Used , A Research

Example: Prediction of Salary From Years of Job Experience, Assumptions and Data Screening,
Issues in Planning a Bivariate Regression Study, Formulas for Bivariate Regression, Statistical
Significance Tests for Bivariate Regression, Setting Up Confidence Intervals Around Regression
Coefficients, Factors That Influence the Magnitude and Sign of b, Factors That Affect the Size of the
b Coefficient, Comparison of Coefficients for Different Predictors or for Different Groups, Effect
Size/Partition of Variance in Bivariate Regression, Statistical Power, Raw Score Versus Standard
Score Versions of the Regression Equation, Removing the Influence of X From the Y Variable by
Looking at Residuals, From Bivariate Regression, Empirical Example Using SPSS- Information to
Report From a Bivariate Regression.

Text book 1: Chapter 9 (9.1 to 9.13)

RBT: L1, L2, L3

Module-5

Multiple Regression With Two Predictor Variables, Research Situations Involving Regression
With Two Predictor Variables, Hypothetical Research Example, Graphic Representation of
Regression Plane, Semi-partial (or “Part”) Correlation, Graphic Representation of Partition of
Variance in Regression, With Two Predictors, Assumptions for Regression With Two Predictors,
Formulas for Regression Coefficients, Significance Tests and Confidence Intervals

Text book 1: Chapter 11(11.1 to 11.7)

RBT: L1, L2, L3

 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Course outcomes:
At the end of the course the student will be able to:
1. Describe the method used for analysis, including a discussion of advantages, disadvantages, and
necessary assumptions
2. Demonstrate the correlation is used to identify relationships between variables and how regression
analysis is used to predict outcomes
3. Develop probability distribution of discrete, continuous random variables and joint probability
distribution occurring in digital signal processing, information theory and design engineering
4. Test the hypothesis of sampling distributions and illustrate examples of Markov chains related to
discrete parameter stochastic process.

Question paper pattern:

The SEE question paper will be set for 100 marks and the marks scored will be proportionately
reduced to 60.

● The question paper will have ten full questions carrying equal marks.
● Each full question is for 20 marks.
● There will be two full questions (with a maximum of four sub questions) from each module.
● Each full question will have sub question covering all the topics under a module.
● The students will have to answer five full questions, selecting one full question from each
module.
Textbook/ Textbooks

1.Applied Statistics From Bivariate Through Multivariate Techniques, Rebecca M Warne, SAGE
Publications, Inc, 2nd Edition, April 2012

Reference Books

1.Probability and Statistics for engineers and scientists, R.E.Walpole, R.H.Mayers, S.L.Mayers and
K.Ye., Pearson Education

2. Probability and Statistics, J.L.Devore., Cengage Learning., 8th Edition, 2012

3. Applied Statistics and Probability for Engineers., DouglasC. Montgomery, George C. Runger,
John Wiley., 6th edition

ARTIFICIAL INTELLIGENCE LABORATORY

(Effective from the academic year 2018 -2019)
SEMESTER – V
Subject Code 18AIL57 CIE Marks 40
Number of Contact Hours/Week 0:2:2 SEE Marks 60
Total Number of Lab Contact Hours Exam Hours 3 Hrs
Credits – 2
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Course Learning Objectives: This course will enable students to:

 Implement and evaluate AI algorithms in Python programming language.
Descriptions (if any):
Installation procedure of the required software must be demonstrated, carried out in groups and
documented in the journal.
Programs List:
Practicing Problems in Python( Students can be encouraged to practice good number of practice
problems , some practice problems are listed here )
1. (a) Write a python program to print the multiplication table for the given number
(b) Write a python program to check whether the given number is prime or not?
(c) Write a python program to find factorial of the given number?
2. (a) Write a python program to implement List operations (Nested List, Length,Concatenation,
Membership, Iteration, Indexing and Slicing)
(b) Write a python program to implement List methods (Add, Append, Extend & Delete).
3. Write a python program to implement simple Chatbot with minimum 10 conversations
4. Write a python program to Illustrate Different Set Operations
5. (a)Write a python program to implement a function that counts the number of times a
string(s1) occurs in another string(s2)
(b)Write a program to illustrate Dictionary operations([],in,traversal)and methods:
keys(),values(),items()
AI Problems to be implemented in Python
1 Implement and Demonstrate Depth First Search Algorithm on Water Jug Problem
2 Implement and Demonstrate Best First Search Algorithm on any AI problem
3 Implement AO* Search algorithm.
4 Solve 8-Queens Problem with suitable assumptions
5 Implementation of TSP using heuristic approach
6 Implementation of the problem solving strategies: either using Forward Chaining or Backward
Chaining
7 Implement resolution principle on FOPL related problems
8 Implement any Game and demonstrate the Game playing strategies

Laboratory Outcomes: The student should be able to:

 Implement and demonstrate AI algorithms.
 Evaluate different algorithms.
Conduct of Practical Examination:
 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the
lot with equal opportunity.
o For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accoradance with university regulations)
i) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks

j) For laboratories having PART A and PART B

i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

DBMS LABORATORY WITH MINI PROJECT

(Effective from the academic year 2018 -2019)
SEMESTER – V

Subject Code 18CSL58 CIE Marks 40

Number of Contact Hours/Week 0:2:2 SEE Marks 60
Total Number of Lab Contact Hours Exam Hours 3 Hrs
Credits – 2
Course Learning Objectives: This course will enable students to:
 Foundation knowledge in database concepts, technology and practice to groom students into well-
informed database application developers.
 Strong practice in SQL programming through a variety of database problems.
 Develop database applications using front-end tools and back-end DBMS.
Descriptions (if any):
PART-A: SQL Programming ()
 Design, develop, and implement the specified queries for the following problems using Oracle,
MySQL, MS SQL Server, or any other DBMS under LINUX/Windows environment.
 Create Schema and insert at least 5 records for each table. Add appropriate database
constraints.
PART-B: Mini Project ()
 Use Java, C#, PHP, Python, or any other similar front-end tool. All applications must be
demonstrated on desktop/laptop as a stand-alone or web based application (Mobile apps on
Android/IOS are not permitted.)
.
Installation procedure of the required software must be demonstrated, carried out in groups and
documented in the journal.
Programs List:
PART A
1. Consider the following schema for a Library Database:
BOOK(Book_id, Title, Publisher_Name, Pub_Year)
BOOK_AUTHORS(Book_id, Author_Name)
PUBLISHER(Name, Address, Phone)
BOOK_COPIES(Book_id, Branch_id, No-of_Copies)
BOOK_LENDING(Book_id, Branch_id, Card_No, Date_Out, Due_Date)
LIBRARY_BRANCH(Branch_id, Branch_Name, Address)
Write SQL queries to
1. Retrieve details of all books in the library – id, title, name of publisher, authors,
number of copies in each branch, etc.
2. Get the particulars of borrowers who have borrowed more than 3 books, but from Jan
2017 to Jun 2017.
3. Delete a book in BOOK table. Update the contents of other tables to reflect this data
manipulation operation.
4. Partition the BOOK table based on year of publication. Demonstrate its working with
a simple query.
5. Create a view of all books and its number of copies that are currently available in the
Library.
2. Consider the following schema for Order Database:
SALESMAN(Salesman_id, Name, City, Commission)
CUSTOMER(Customer_id, Cust_Name, City, Grade, Salesman_id)
ORDERS(Ord_No, Purchase_Amt, Ord_Date, Customer_id, Salesman_id)
Write SQL queries to
1. Count the customers with grades above Bangalore‟s average.
2. Find the name and numbers of all salesman who had more than one customer.
3. List all the salesman and indicate those who have and don‟t have customers in their
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

cities (Use UNION operation.)

4. Create a view that finds the salesman who has the customer with the highest order of a
day.
5. Demonstrate the DELETE operation by removing salesman with id 1000. All his
orders must also be deleted.
3. Consider the schema for Movie Database:
ACTOR(Act_id, Act_Name, Act_Gender)
DIRECTOR(Dir_id, Dir_Name, Dir_Phone)
MOVIES(Mov_id, Mov_Title, Mov_Year, Mov_Lang, Dir_id)
MOVIE_CAST(Act_id, Mov_id, Role)
RATING(Mov_id, Rev_Stars)
Write SQL queries to
1. List the titles of all movies directed by „Hitchcock‟.
2. Find the movie names where one or more actors acted in two or more movies.
3. List all actors who acted in a movie before 2000 and also in a movie after 2015 (use
JOIN operation).
4. Find the title of movies and number of stars for each movie that has at least one rating
and find the highest number of stars that movie received. Sort the result by movie
title.
5. Update rating of all movies directed by „Steven Spielberg‟ to 5.
4. Consider the schema for College Database:
STUDENT(USN, SName, Address, Phone, Gender)
SEMSEC(SSID, Sem, Sec)
CLASS(USN, SSID)
SUBJECT(Subcode, Title, Sem, Credits)
IAMARKS(USN, Subcode, SSID, Test1, Test2, Test3, FinalIA)
Write SQL queries to
1. List all the student details studying in fourth semester „C‟ section.
2. Compute the total number of male and female students in each semester and in each
section.
3. Create a view of Test1 marks of student USN „1BI15CS101‟ in all subjects.
4. Calculate the FinalIA (average of best two test marks) and update the corresponding
table for all students.
5. Categorize students based on the following criterion:
If FinalIA = 17 to 20 then CAT = „Outstanding‟
If FinalIA = 12 to 16 then CAT = „Average‟
If FinalIA< 12 then CAT = „Weak‟
Give these details only for 8th semester A, B, and C section students.
5. Consider the schema for Company Database:
EMPLOYEE(SSN, Name, Address, Sex, Salary, SuperSSN, DNo)
DEPARTMENT(DNo, DName, MgrSSN, MgrStartDate)
DLOCATION(DNo,DLoc)
PROJECT(PNo, PName, PLocation, DNo)
WORKS_ON(SSN, PNo, Hours)
Write SQL queries to
1. Make a list of all project numbers for projects that involve an employee whose last
name is „Scott‟, either as a worker or as a manager of the department that controls the
project.
2. Show the resulting salaries if every employee working on the „IoT‟ project is given a
10 percent raise.
3. Find the sum of the salaries of all employees of the „Accounts‟ department, as well as
the maximum salary, the minimum salary, and the average salary in this department
4. Retrieve the name of each employee who works on all the projects controlledby
department number 5 (use NOT EXISTS operator).
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

5. For each department that has more than five employees, retrieve the department
number and the number of its employees who are making more than Rs. 6,00,000.
PART B: Mini Project
 For any problem selected make sure that the application should have five or more
tables indicative areas include; health care , salary management, office automation,
etc.
Laboratory Outcomes: The student should be able to:
 Create, Update and query on the database.
 Demonstrate the working of different concepts of DBMS
 Implement, analyze and evaluate the project developed for an application.
Conduct of Practical Examination:
 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the
lot with equal opportunity.
o For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accoradance with university regulations)
k) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks
l) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

MACHINE LEARNING
(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18AI61 CIE Marks 40
Number of Contact Hours/Week 3:2:0 SEE Marks 60
Total Number of Contact Hours 50 Exam Hours 3 Hrs
CREDITS – 04
Course Learning Objectives: This coursewill enable students to:
 Define machine learning and understand the basic theory underlying machine learning.
 Differentiate supervised, unsupervised and reinforcement learning
 Understand the basic concepts of learning and decision trees.
 Understand Bayesian techniques for problems appear in machine learning
 Perform statistical analysis of machine learning techniques.

Module – 1 CH
Introduction: 10
Machine learning Landscape: what is ML?, Why, Types of ML, main challenges of ML
(T2:Chapter1)
Concept learning and Learning Problems – Designing Learning systems, Perspectives and Issues –
Concept Learning – Find S-Version Spaces and Candidate Elimination Algorithm –Remarks on VS-
Inductive bias –
T2: Chapter 1
T1:Chapter 1 and 2)
Module – 2
End to end Machine learning Project : 10
Working with real data, Look at the big picture, Get the data, Discover and visualize the data,
Prepare the data, select and train the model, Fine tune your model
Classification : MNIST, training a Binary classifier, performance measure, multiclass
classification, error analysis, multi label classification, multi output classification
(T2: chapter 2 and 3)
Module – 3
Training Models: Linear regression, gradient descent, polynomial regression, learning 10
curves, regularized linear models, logistic regression
Support Vector Machine: linear, Nonlinear , SVM regression and under the hood
(T2: Chapter 4 and 5)
RBT: L1, L2
Module – 4
Decision Trees 10
Training and Visualizing DT, making prediction, estimating class, the CART training,
computational complexity, GINI impurity, Entropy, regularization Hyper parameters,
Regression, instability
Ensemble learning and Random Forest:
Voting classifiers, Bagging and pasting, Random patches, Random forests, Boosting,
stacking
(T2: Chapter 6 and 7)
RBT: L1, L2
Module – 5
Bayes Theorem – Concept Learning – Maximum Likelihood – Minimum Description Length 10
Principle – Bayes Optimal Classifier – Gibbs Algorithm – Naïve Bayes Classifier– example-
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Bayesian Belief Network – EM Algorithm

Text book (T1: Chapter 6)
RBT: L1, L2
Course outcomes: The students should be able to:
 Choose the learning techniques with this basic knowledge.
 Apply effectively ML algorithms for appropriate applications.
 Apply bayesian techniques and derive effectively learning rules.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Tom M. Mitchell, Machine Learning, McGraw-Hill Education, 2013
2. AurelienGeron, Hands-on Machine Learning with Scikit-Learn &TensorFlow , O‟Reilly, Shroff
Publishers and Distributors pvt.Ltd 2019
Reference Books:
1. EthemAlpaydin, Introduction to Machine Learning, PHI Learning Pvt. Ltd, 2nd Ed., 2013
2. T. Hastie, R. Tibshirani, J. H. Friedman, The Elements of Statistical Learning, Springer, 1st edition,
2001
3. Machine Learning using Python ,Manaranjan Pradhan, U Dinesh kumar, Wiley, 2019
4. Machine Learning, SaikatDutt, Subramanian Chandramouli, Amit Kumar Das, Pearson,2020

DATA SCIENCE AND ITS APPLICATIONS

(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18AD62 CIE Marks 40
Number of Contact Hours/Week 3:2:0 SEE Marks 60
Total Number of Contact Hours 50 Exam Hours 03
CREDITS –4
Course Objectives: This course will enable students to:
 Determine the appropriate natural language processing, machine learning and deep learning models to
solve the business-related challenges.
 Indicate proficiency with statistical analysis of data to derive insight from results and interpret the data
findings visually.
 Demonstrate skills in data management by obtaining, cleaning and transforming the data.
 Discuss how social networks appraise the ways in which the social clustering shape individuals and
groups in contemporary society.
Module-1 Contact
Hours.
Introduction : What is Data Science?
10
Visualizing Data, matplotlib, Bar Charts, Line Charts, Scatterplots, Linear Algebra, Vectors,
Matrices, Statistics, Describing a Single Set of Data, Correlation, Simpson‟s Paradox, Some
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Other Correlational Caveats, Correlation and Causation, Probability, Dependence and

Independence, Conditional Probability, Bayes‟s Theorem, Random Variables, Continuous
Distributions, The Normal Distribution, The Central Limit Theorem.
Chapters 1, 3, 4, 5 and 6
RBT: L2, L3
Module-2
Hypothesis and Inference,Statistical Hypothesis Testing, Example: Flipping a Coin, p-Values,
Confidence Intervals, p-Hacking, Example: Running an A/B Test, Bayesian Inference, Gradient
Descent, The Idea Behind Gradient Descent Estimating the Gradient, Using the Gradient,
Choosing the Right Step Size, Using Gradient Descent to Fit Models, Minibatch and Stochastic
Gradient Descent, Getting Data, stdin and stdout, Reading Files, Scraping the Web, Using APIs,
Example: Using the Twitter APIs, Working with Data, Exploring Your Data, Using 10
NamedTuples, Dataclasses, Cleaning and Munging, Manipulating Data, Rescaling, An Aside:
tqdm, Dimensionality Reduction.
Chapters 7, 8, 9 and 10
RBT: L2, L3
Module-3
Machine Learning, Modeling, What Is Machine Learning?, Overfitting and Underfitting,
Correctness, The Bias-Variance Tradeoff, Feature Extraction and Selection, k-Nearest
Neighbors, The Model, Example: The Iris Dataset, The Curse of Dimensionality, Naive Bayes, A
Really Dumb Spam Filter, A More Sophisticated Spam Filter, Implementation, Testing Our
Model, Using Our Model, Simple Linear Regression, The Model, Using Gradient Descent,
Maximum Likelihood Estimation, Multiple Regression, The Model, Further Assumptions of the 10
Least Squares Model, Fitting the Model, Interpreting the Model, Goodness of Fit, Digression: The
Bootstrap, Standard Errors of Regression Coefficients, Regularization, Logistic Regression, The
Problem, The Logistic Function, Applying the Model, Goodness of Fit, Support Vector Machines.
Chapters 11, 12, 13, 14, 15 and 16
RBT: L2, L3
Module-4
Decision Trees, What Is a Decision Tree?, Entropy, The Entropy of a Partition, Creating a
Decision Tree, Putting It All Together, Random Forests, Neural Networks,Perceptrons, Feed-
Forward Neural Networks, Backpropagation, Example: Fizz Buzz, Deep Learning, The Tensor,
The Layer Abstraction, The Linear Layer, Neural Networks as a Sequence of Layers, Loss and
Optimization, Example: XOR Revisited, Other Activation Functions, Example: FizzBuzz
Revisited, Softmaxes and Cross-Entropy, Dropout, Example: MNIST, Saving and Loading 10
Models, Clustering, The Idea, The Model, Example: Meetups, Choosing k, Example: Clustering
Colors, Bottom-Up Hierarchical Clustering.
Chapters17, 18, 19 and 20
RBT: L2, L3
Module-5
Natural Language Processing, Word Clouds, n-Gram Language Models, Grammars, An Aside:
Gibbs Sampling, Topic Modeling, Word Vectors, Recurrent Neural Networks, Example: Using a 10
Character-Level RNN, Network Analysis, Betweenness Centrality, Eigenvector Centrality,
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Directed Graphs and PageRank, Recommender Systems,Manual Curation, Recommending

What‟s Popular, User-Based Collaborative Filtering, Item-Based Collaborative Filtering, Matrix
Factorization.
Chapters 21, 22 and 23
RBT: L2, L3
Course Outcomes: After studying this course, students will be able to:
 Interpret the concepts and methods of mathematical disciplines relevant to data analytics and statistical
modeling.
 Examine, visualize, curate, and prepare data and recognize how the quality of the data and the means of
data collection may affect interpretation.
 Determine the machine learning, deep learning and natural language processing skills to design and
implement efficient, data-driven solutions for real world problems.
 Illustrate how network analysis and recommender systems can contribute to increasing knowledge
about diverse aspects of societal clustering.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Joel Grus, “Data Science from Scratch”, 2ndEdition, O‟Reilly Publications/Shroff Publishers and
Distributors Pvt. Ltd., 2019. ISBN-13: 978-9352138326.
Reference Books:
1. Emily Robinson and Jacqueline Nolis, “Build a Career in Data Science”, 1st Edition, Manning
Publications, 2020. ISBN: 978-1617296246.
2. AurélienGéron, “Hands-On Machine Learning with Scikit-Learn, Keras, and TensorFlow:
Concepts, Tools, and Techniques to Build Intelligent Systems”, 2nd Edition, O'Reilly
Publications/Shroff Publishers and Distributors Pvt. Ltd., 2019. ISBN-13: 978-1492032649.
3. François Chollet, “Deep Learning with Python”, 1st Edition, Manning Publications, 2017. ISBN-13:
978-1617294433
4. Jeremy Howard and Sylvain Gugger, “Deep Learning for Coders with fastai and PyTorch”, 1st
Edition, O'Reilly Publications/Shroff Publishers and Distributors Pvt. Ltd., 2020. ISBN-13: 978-
1492045526.
5. Sebastian Raschka and Vahid Mirjalili, “Python Machine Learning: Machine Learning and Deep
Learning with Python, scikit-learn, and TensorFlow 2”, 3rd Edition, Packt Publishing Limited,
2019.ISBN-13: 978-1789955750

JAVA FOR MOBILE APPLICATIONS

(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18AI63 CIE Marks 40
Number of Contact Hours/Week 3:2:0 SEE Marks 60
Total Number of Contact Hours 50 Exam Hours 3 Hrs
CREDITS –3
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Course Learning Objectives: This course will enable students:

 To have an insight into enumerations and collection frameworks for storing and processing
data.
 To understand the architecture and components of android application.
 To design interactive user interface.
 To work with SQLite database

Module 1 Contact
Hours
Enumerations, Autoboxing and Annotations(metadata): Enumerations, Enumeration
fundamentals, the values () and valueOf() Methods, java enumerations are class types,
enumerations Inherits Enum, example, type wrappers, Autoboxing, Autoboxing and
Methods, Autoboxing/Unboxing occurs in Expressions, Autoboxing/Unboxing, Boolean 10
and character values, Autoboxing/Unboxing helps prevent errors, A word of Warning.
Annotations, Annotation basics, specifying retention policy, Obtaining Annotations at run
time by use of reflection, Annotated element Interface, Using Default values, Marker
Annotations, Single Member annotations, Built-In annotations.
RBT: L2, L3
Module 2

The collections and Framework: Collections Overview, Recent Changes to Collections,

The Collection Interfaces, The Collection Classes, accessing a collection Via an Iterator,
Storing User Defined Classes in Collections, The Random Access Interface, Working with 10
Maps, Comparators, The Collection Algorithms, Why Generic Collections? The legacy
Classes and Interfaces, Parting Thoughts on Collections
RBT: L1, L2
Module 3
String Handling: The String Constructors, String Length, Special String Operations,
String Literals, String Concatenation, String Concatenation with Other Data Types, String
Conversion and toString( ) Character Extraction, charAt( ), getChars( ), getBytes( )
toCharArray(), String Comparison, equals( ) and equalsIgnoreCase( ), regionMatches( )
startsWith( ) and endsWith( ), equals( ) Versus ==, compareTo( ) Searching Strings,
Modifying a String, substring( ), concat( ), replace( ), trim( ), Data Conversion Using 10
valueOf( ), Changing the Case of Characters Within a String, Additional String Methods,
StringBuffer, StringBuffer Constructors, length( ) and capacity( ), ensureCapacity( ),
setLength( ), charAt( ) and setCharAt( ), getChars( ),append( ), insert( ), reverse( ), delete(
) and deleteCharAt( ), replace( ), substring( ), Additional StringBuffer Methods,
StringBuilder Text Book 1: Ch 15
Module 4

Getting Started with Android Programming: What is Android? Features of Android,

Android Architecture, obtaining the required tools, launching your first android application
Activities, Fragments and Intents: Understanding activities, linking activities using 10
intents, fragments.Text Book 3: Ch 1, 3

RBT: L1, L2, L3

Module 5

Getting to know the Android User Interface: Views and ViewGroups, FrameLayout, 10
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

LinearLayout, TableLayout, RelativeLayout, ScrollView

Designing User Interface with Views: TextView view – Button, ImageButton, EditText,
Checkbox, ToggleButton, RadioButton and RadioGroupViews.
Creating and using Databases: Creating the DBAdapter Helper class, using the database
programmatically. Text Book 3: Ch 4.1, 5.1, 7.3
RBT: L1, L2, L3
Course Outcomes: The student will be able to:

 Interpret the need for advanced Java concepts like enumerations and collections in developing
modular and efficient programs
 Understand various application components in android.
 Design efficient user interface using different layouts.
 Develop application with persistent data storage using SQLite
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each
module.
Textbooks:
1.Herbert Schildt: JAVA the Complete Reference, 7th/9th Edition, Tata McGraw Hill, 2007.
2.Jim Keogh: J2EE-TheCompleteReference, McGraw Hill, 2007
3.J. F. DiMarzio, Beginning Android Programming with Android Studio, 4thEdition, 2017

Reference Books:
1. John Horton,Android Programming for Beginners, 1stEdition, 2015
2.Dawn Griffiths & David Griffiths, Head First Android Development, O‟Reilly, 1 stEdition,
2015

NATURAL LANGUAGE PROCESSING

(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18AI641 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 Analyze the natural language text.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Define the importance of natural language.

 Understand the concepts Text mining.
 Illustrate information retrieval techniques.
Module – 1 Contact
Hours
Overview and language modeling: Overview: Origins and challenges of NLP-Language and 08
Grammar-Processing Indian Languages- NLP Applications-Information Retrieval. Language
Modeling: Various Grammar- based Language Models-Statistical Language Model.
Textbook 1: Ch. 1,2
RBT: L1, L2, L3
Module – 2
Word level and syntactic analysis: Word Level Analysis: Regular Expressions-Finite-State 08
Automata-Morphological Parsing-Spelling Error Detection and correction-Words and Word
classes-Part-of Speech Tagging. Syntactic Analysis: Context-free Grammar-Constituency-
Parsing-Probabilistic Parsing.
Textbook 1: Ch. 3,4
RBT: L1, L2, L3
Module – 3
Extracting Relations from Text: From Word Sequences to Dependency Paths: 08
Introduction, Subsequence Kernels for Relation Extraction, A Dependency-Path Kernel for
Relation Extraction and Experimental Evaluation.
Mining Diagnostic Text Reports by Learning to Annotate Knowledge Roles: Introduction,
Domain Knowledge and Knowledge Roles, Frame Semantics and Semantic Role Labeling,
Learning to Annotate Cases with Knowledge Roles and Evaluations.
A Case Study in Natural Language Based Web Search: InFact System Overview, The
GlobalSecurity.org Experience.
Textbook 2: Ch. 3,4,5
RBT: L1, L2, L3
Module – 4
Evaluating Self-Explanations in iSTART: Word Matching, Latent Semantic Analysis, and 08
Topic Models: Introduction, iSTART: Feedback Systems, iSTART: Evaluation of Feedback
Systems,
Textual Signatures: Identifying Text-Types Using Latent Semantic Analysis to Measure the
Cohesion of Text Structures: Introduction, Cohesion, Coh-Metrix, Approaches to Analyzing
Texts, Latent Semantic Analysis, Predictions, Results of Experiments.
Automatic Document Separation: A Combination of Probabilistic Classification and Finite-
State Sequence Modeling: Introduction, Related Work, Data Preparation, Document Separation
as a Sequence Mapping Problem, Results.
Evolving Explanatory Novel Patterns for Semantically-Based Text Mining: Related Work, A
Semantically Guided Model for Effective Text Mining.
Textbook 2: Ch. 6,7,8,9
RBT: L1, L2, L3
Module – 5
Information Retrieval And Lexical Resources: Information Retrieval: Design features of 08
Information Retrieval Systems-Classical, Non classical, Alternative Models of Information
Retrieval – valuation Lexical Resources: World Net-Frame Net- Stemmers-POS Tagger-
Research Corpora.
Textbook 1: Ch. 9,12
RBT: L1, L2, L3
Course outcomes: The students should be able to:
 Analyze the natural language text.
 Define the importance of natural language.
 Understand the concepts Text mining.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Illustrate information retrieval techniques.

Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Tanveer Siddiqui, U.S. Tiwary, “Natural Language Processing and Information Retrieval”, Oxford
University Press, 2008.
2. Anne Kao and Stephen R. Poteet (Eds), “Natural LanguageProcessing and Text Mining”, Springer-
Verlag London Limited 2007.
Reference Books:
1. Daniel Jurafsky and James H Martin, “Speech and Language Processing: Anintroduction to Natural
Language Processing, Computational Linguistics and SpeechRecognition”, 2nd Edition, Prentice
Hall, 2008.
2. James Allen, “Natural Language Understanding”, 2nd edition, Benjamin/Cummingspublishing
company, 1995.
3. Gerald J. Kowalski and Mark.T. Maybury, “Information Storage and Retrieval systems”, Kluwer
academic Publishers, 2000.
SOFTWARE PROJECT MANAGEMENT
(Effective from the academic year 2018 -2019) JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021
SEMESTER – VI
Subject Code 18AI642 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 Understand the basics of software project management concepts, principles and practices.
 Understand the different methods of estimation for software project.
 Understand the basic concepts, principles and practices of software project scheduling and
riskmanagement.
 Analyse a software project based on various review metrics with review guidelines.
 Understand software project maintenance, reengineering and configuration management.
Module – 1 Contact
Hours
Project Management Concepts: The Management Spectrum – The People, The Products, The 08
Process, TheProject, People -The Stakeholders, Team Leaders, The Software Team, Agile Teams,
Coordination AndCommunication Issues, The Product – Software Scope, Problem Decomposition,
The Process – Melding TheProductsAnd The Process, Process Decomposition, The Project, The
W5HH Principle, Critical Practices.

T1: Chapter 31

RBT: L1, L2

Module – 2
Metrics in the Process and Project Domains -Process Metrics And Software Process 08
Improvement, ProjectMetrics, Software Measurement – Size-Oriented Metrics, Function-Oriented
Metrics, Reconciling LOC AndFP Metrics, Object-Oriented Metrics, Use Cases- Oriented Metrics,
Webapp Project Metrics, Metrics ForSoftware Quality – Measuring Quality ,Defect Removal
Efficiency, Integrating Metrics With The SoftwareProcess - Arguments For Software Metrics,
Establishing A Baseline, Metrics Collection Computation AndEvaluation, Metrics For Small
Organisation, Establishing A Software Metrics Program.

T1: Chapter 32

RBT: L1, L2
Module – 3
Estimation for Software Project: Observations On Estimation, The Project Planning Process, 08
SoftwareScope And Feasibility, Resources – Human Resources, Reusable Software Resources,
EnvironmentalResources, Software Project Estimation, Decomposition Techniques – Software
Sizing, Problem BasedEstimation, An Example Of LOC Based Estimation, An Example Of FP –
Based Estimation, Process-BasedEstimation, An Example Of Process- Based Estimation,
Estimation With Usecases, An Example Of EstimationUsing Use Case Points, Reconciling
Estimates, Empirical Estimation Models – The Structure Of EstimationModels, The COCOMO II
Model, The Software Equation.

T1: Chapter 33
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1, L2
Module – 4
Project Scheduling: Basic concepts, Project Scheduling – Basic Principles - The Relationship 08
BetweenPeople and Effort – Effort Distribution, defining a Task Set for The Software Project – a
Task Set Example –Refinement of Major Tasks, defining a Task Network, Scheduling – Timeline
Charts – Tracking the Schedule– Tracking Progress for an OO Project.

T1: Chapter 34

RBT: L1, L2
Module – 5
Software Quality: What is Quality? Software Quality – Garvin's Quality Dimensions, 08
McColl‟sQualityFactors, ISO 9126 Quality Factors, Targeted Quality Factors, The Transition to a
Quantitative View, TheSoftware Quality Dilemma - “Good Enough” Software, The Cost Of
Quality, Risks, Negligence and Liability,Quality and Security, The Impact Of Management
Actions, Achieving Software Quality – SoftwareEngineering Methods, Project Management
Techniques, Quality Control, Quality Assurance.

T1: Chapter 19
RBT: L1, L2

Course outcomes: The students should be able to:

 Describe the basics of software project management concepts, principles and practices.
 Apply the different metrics and techniques to measure a software project.
 Apply software cost estimation models.
 Apply scheduling techniques to software project.
 Discuss the software quality concepts and good practices.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Software Engineering: APractitioner'sApproachRoger S. Pressman, BruceMaximMcGraw Hill 8th
Edition,2015
Reference Books:
1. Software Project ManagementBobHughesMikeCotterellRajibMallMcGraw Hill 6th Edition 2018
2. Managing the Software ProcessWattsHumphreyPearson Education 2000
3. Software Project Management inpracticePankajJalote Pearson Education 2002

WEB PROGRAMMING
(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18AI643 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –4
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Course Learning Objectives: This course will enable students to:

 Illustrate the Semantic Structure of HTML and CSS
 Compose forms and tables using HTML and CSS
 Design Client-Side programs using JavaScript and Server-Side programs using PHP
 Infer Object Oriented Programming capabilities of PHP
 Examine JavaScript frameworks such as jQuery and Backbone
Module 1 Contact
Hours
Introduction to HTML, What is HTML and Where did it come from?, HTML Syntax, Semantic 8
Markup, Structure of HTML Documents, Quick Tour of HTML Elements, HTML5 Semantic
Structure Elements, Introduction to CSS, What is CSS, CSS Syntax, Location of Styles,
Selectors, The Cascade: How Styles Interact, The Box Model, CSS Text Styling.
Textbook 1: Ch. 2, 3
RBT: L1, L2, L3
Module 2
HTML Tables and Forms, Introducing Tables, Styling Tables, Introducing Forms, Form Control 8
Elements, Table and Form Accessibility, Microformats, Advanced CSS: Layout, Normal Flow,
Positioning Elements, Floating Elements, Constructing Multicolumn Layouts, Approaches to
CSS Layout, Responsive Design, CSS Frameworks.
Textbook 1: Ch. 4,5
RBT: L1, L2, L3
Module 3
JavaScript: Client-Side Scripting, What is JavaScript and What can it do?, JavaScript Design 8
Principles, Where does JavaScript Go?, Syntax, JavaScript Objects, The Document Object
Model (DOM), JavaScript Events, Forms, Introduction to Server-Side Development with PHP,
What is Server-Side Development, A Web Server‟s Responsibilities, Quick Tour of PHP,
Program Control, Functions
Textbook 1: Ch. 6, 8
RBT: L1, L2, L3
Module 4
PHP Arrays and Superglobals, Arrays, $_GET and $_POST Superglobal Arrays, $_SERVER 8
Array, $_Files Array, Reading/Writing Files, PHP Classes and Objects, Object-Oriented
Overview, Classes and Objects in PHP, Object Oriented Design, Error Handling and Validation,
What are Errors and Exceptions?, PHP Error Reporting, PHP Error and Exception Handling
Textbook 1: Ch. 9, 10
RBT: L1, L2, L3
Module 5
Managing State, The Problem of State in Web Applications, Passing Information via Query 8
Strings, Passing Information via the URL Path, Cookies, Serialization, Session State, HTML5
Web Storage, Caching, Advanced JavaScript and jQuery, JavaScript Pseudo-Classes, jQuery
Foundations, AJAX, Asynchronous File Transmission, Animation, Backbone MVC
Frameworks, XML Processing and Web Services, XML Processing, JSON, Overview of Web
Services.
Textbook 1: Ch. 13, 15,17
RBT: L1, L2, L3
Course Outcomes: The student will be able to :
 Adapt HTML and CSS syntax and semantics to build web pages.
 Construct and visually format tables and forms using HTML and CSS
 Develop Client-Side Scripts using JavaScript and Server-Side Scripts using PHP to generate and
display the contents dynamically.
 Appraise the principles of object oriented development using PHP
 Inspect JavaScript frameworks like jQuery and Backbone which facilitates developer to focus on core
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

features.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Randy Connolly, Ricardo Hoar, "Fundamentals of Web Development”, 1stEdition, Pearson
Education India. (ISBN:978-9332575271)
Reference Books:
1. Robin Nixon, “Learning PHP, MySQL &JavaScript with jQuery, CSS and HTML5”, 4thEdition,
O‟Reilly Publications, 2015. (ISBN:978-9352130153)
2. Luke Welling, Laura Thomson, “PHP and MySQL Web Development”, 5th Edition, Pearson
Education, 2016. (ISBN:978-9332582736)
3. Nicholas C Zakas, “Professional JavaScript for Web Developers”, 3rd Edition, Wrox/Wiley India,
2012. (ISBN:978-8126535088)
4. David Sawyer Mcfarland, “JavaScript & jQuery: The Missing Manual”, 1st Edition,
O‟Reilly/Shroff Publishers & Distributors Pvt Ltd, 2014
Mandatory Note:
Distribution of CIE Marks is a follows (Total 40 Marks):
 20 Marks through IA Tests
 20 Marks through practical assessment

Maintain a copy of the report for verification during LIC visit.

ANALYSIS ON BIG DATA

(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18AD644 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course (18AD644) will enable students to:
 Identify the tools required to manage and analyze big data
 Implement Techniques and Principles in achieving big data analytics with scalability and
streaming capability.
 Analyze web graph and social network.

Module – 1 CH
Introduction to Big Data Analytics: Big Data, Scalability and Parallel Processing, 08
Designing Data Architecture, Data Sources, Quality, Pre-Processing and Storing, Data
Storage and Analysis, Big Data Analytics Applications and Case Studies.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Text book 1 : Chapter 1 (1.1 to 1.7)

RBT: L1, L2, L3

Module – 2
Introduction to Hadoop: Hadoop Distributed File System Basics, Running Example 08
Programs and Benchmarks, Hadoop MapReduce Framework, MapReduce, Essential
Hadoop Tools - Using Apache Pig, Hive.

Text book 2 : Chapter 3 ( 3.1 to 3.2 ), Chapter 4 ( 4.1 to 4.2), Chapter 5 (5.1 to 5.2),
Chapter 7 ( 7.1 to 7.2)

RBT: L1, L2, L3

Module – 3
NoSQL Big Data Management, MongoDB and Cassandra: Introduction, NoSQL Data 08
Store, NoSQL Data Architecture Patterns, NoSQL to Manage Big Data, Shared-Nothing
Architecture for Big Data Tasks, MongoDB, Databases, Cassandra Databases.

Text book 1 : Chapter 3 (3.1 to 3.7)

RBT: L1, L2, L3

Module – 4
MapReduce, Hive and Pig: Introduction, MapReduce Map Tasks, Reduce Tasks and 08
MapReduce Execution, Composing MapReduce for Calculations and Algorithms, Hive,
HiveQL, Pig.

Text book 1 : Chapter 4 (4.1 to 4.6)

RBT: L1, L2, L3

Module – 5
Text, Web Content, Link, and Social Network Analytics: Introduction, Text mining, 08
Web Mining Web Content and Web Usage Analytics, Page Rank, Structure of Web and
analyzing a Web Graph, Social Network as Graphs and Social Network Analytics:

Text book 1: Chapter 9 ( 9.1 to 9.5 )

RBT: L1, L2, L3

Course outcomes: The students should be able to:
● Understand fundamentals of Big Data analytics.
● Investigate Hadoop framework and Hadoop Distributed File system.
● Illustrate the concepts of NoSQL using MongoDB and Cassandra for Big Data.
● Demonstrate the MapReduce programming model to process the big data along with Hadoop
tools.
 Analyze web contents and Social Networks to provide analytics with relevant visualization
tools.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Raj Kamal and Preeti Saxena, “Big Data Analytics Introduction to Hadoop, Spark, and
Machine-Learning”, McGraw Hill Education, 2018 ISBN: 9789353164966, 9353164966.
2. Douglas Eadline, "Hadoop 2 Quick-Start Guide: Learn the Essentials of Big Data
Computing in the Apache Hadoop 2 Ecosystem", 1stEdition, Pearson Education, 2016.
ISBN-13: 978-9332570351.
Reference Books:
1. Tom White, “Hadoop: The Definitive Guide”, 4th Edition, O‟Reilly Media, 2015.ISBN-13:
978- 9352130672.
2. Boris Lublinsky, Kevin T Smith, Alexey Yakubovich, "Professional Hadoop Solutions",
1stEdition, Wrox Press, 2014ISBN-13: 978-8126551071.
3. Eric Sammer, "Hadoop Operations: A Guide for Developers and Administrators", 1st
Edition, O'Reilly Media, 2012.ISBN-13: 978-9350239261.
4. ArshdeepBahga, Vijay Madisetti, "Big Data Analytics: A Hands-On Approach", 1st
Edition, VPT Publications, 2018. ISBN-13: 978-0996025577.

MOBILE APPLICATION DEVELOPMENT

(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18CS651 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Learn to setup Android application development environment
 Illustrate user interfaces for interacting with apps and triggering actions
 Interpret tasks used in handling multiple activities
 Identify options to save persistent application data
 Appraise the role of security and performance in Android applications
Module – 1 CH
Get started, Build your first app, Activities, Testing, debugging and using support libraries 08
Textbook 1: Lesson 1,2,3
RBT: L1, L2
Module – 2
User Interaction, Delightful user experience, Testing your UI 08
Textbook 1: Lesson 4,5,6
RBT: L1, L2
Module – 3
Background Tasks, Triggering, scheduling and optimizing background tasks 08
Textbook 1: Lesson 7,8
RBT: L1, L2
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Module – 4
All about data, Preferences and Settings, Storing data using SQLite, Sharing data with content 08
providers, Loading data using Loaders
Textbook 1: Lesson 9,10,11,12
RBT: L1, L2
Module – 5
Permissions, Performance and Security, Firebase and AdMob, Publish// 08
Textbook 1: Lesson 13,14,15
RBT: L1, L2
Course outcomes: The students should be able to:
 Create, test and debug Android application by setting up Android development environment
 Implement adaptive, responsive user interfaces that work across a wide range of devices.
 Infer long running tasks and background work in Android applications
 Demonstrate methods in storing, sharing and retrieving data in Android applications
 Analyze performance of android applications and understand the role of permissions and security
 Describe the steps involved in publishing Android application to share with the world
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Google Developer Training, "Android Developer Fundamentals Course – Concept Reference”,
Google Developer Training Team, 2017. https://www.gitbook.com/book/google-
developer-training/android-developer-fundamentals-course-concepts/details (Download pdf file from
the above link)
Reference Books:
1. Erik Hellman, “Android Programming – Pushing the Limits”, 1st Edition, Wiley India Pvt Ltd, 2014.
2. Dawn Griffiths and David Griffiths, “Head First Android Development”, 1st Edition, O‟Reilly SPD
Publishers, 2015.
3. J F DiMarzio, “Beginning Android Programming with Android Studio”, 4th Edition, Wiley India Pvt
Ltd, 2016. ISBN-13: 978-8126565580
4. Anubhav Pradhan, Anil V Deshpande, “ Composing Mobile Apps” using Android, Wiley 2014,
ISBN: 978-81-265-4660-2

INTRODUCTION TO DATA SRUCTURES AND ALGORITHM

(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18CS652 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Identify different data structures in C programming language
 Appraise the use of data structures in problem solving
 Implement data structures using C programming language.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Module 1 Contact
Hours
Introduction to C, constants, variables, data types, input output operations, operators and 08
expressions, control statements, arrays, strings, built-in functions, user defined functions,
structures, unions and pointers
Text Book 1: Chapter 1 and 2
RBT: L1, L2
Module 2
Algorithms, Asymptotic notations, Introduction to data structures, Types of data structures, Arrays. 08
Text Book 1: Chapter 3 and 4
RBT: L1, L2
Module 3
Linked lists, Stacks 08
Text Book 1: Chapter 5 and 6
RBT: L1, L2
Module 4
Queues, Trees 08
Text Book 1: Chapter 7 and 8
RBT: L1, L2
Module 5
Graphs, Sorting ,(selection, insertion, bubble, quick)and searching(Linear, Binary, Hash) 08
Text Book 1: Chapter 9 and 10
RBT: L1, L2
Course Outcomes: The student will be able to :
 Identify different data structures in C programming language
 Appraise the use of data structures in problem solving
 Implement data structures using C programming language.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Data structures using C , E Balagurusamy, McGraw Hill education (India) Pvt. Ltd, 2013.
Reference Books:
1. Ellis Horowitz and SartajSahni, Fundamentals of Data Structures in C, 2nd Ed, Universities Press, 2014.
2. Seymour Lipschutz, Data Structures Schaum's Outlines, Revised 1st Ed, McGraw Hill, 2014.

PROGRAMMING IN JAVA
(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18CS653 CIE Marks 40
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Number of Contact Hours/Week 3:0:0 SEE Marks 60

Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Learn fundamental features of object oriented language and JAVA
 Set up Java JDK environment to create, debug and run simple Java programs.
 Learn object oriented concepts using programming examples.
 Study the concepts of importing of packages and exception handling mechanism.
 Discuss the String Handling examples with Object Oriented concepts
Module – 1 C
H
An Overview of Java: Object-Oriented Programming, A First Simple Program, A Second Short Program, 08
Two Control Statements, Using Blocks of Code, Lexical Issues, The Java Class Libraries, Data Types,
Variables, and Arrays: Java Is a Strongly Typed Language, The Primitive Types, Integers, Floating-Point
Types, Characters, Booleans, A Closer Look at Literals, Variables, Type Conversion and Casting,
Automatic Type Promotion in Expressions, Arrays, A Few Words About Strings
Text book 1: Ch 2, Ch 3
RBT: L1, L2
Module – 2
Operators: Arithmetic Operators, The Bitwise Operators, Relational Operators, Boolean Logical Operators, 08
The Assignment Operator, The ? Operator, Operator Precedence, Using Parentheses, Control Statements:
Java‟s Selection Statements, Iteration Statements, Jump Statements.
Text book 1: Ch 4, Ch 5
RBT: L1, L2
Module – 3
Introducing Classes: Class Fundamentals, Declaring Objects, Assigning Object Reference Variables, 08
Introducing Methods, Constructors, The this Keyword, Garbage Collection, The finalize( ) Method, A
Stack Class, A Closer Look at Methods and Classes: Overloading Methods, Using Objects as Parameters,
A Closer Look at Argument Passing, Returning Objects, Recursion, Introducing Access Control,
Understanding static, Introducing final, Arrays Revisited, Inheritance: Inheritance, Using super, Creating a
Multilevel Hierarchy, When Constructors Are Called, Method Overriding, Dynamic Method Dispatch,
Using Abstract Classes, Using final with Inheritance, The Object Class.
Text book 1: Ch 6, Ch 7.1-7.9, Ch 8.
RBT: L1, L2
Module – 4
Packages and Interfaces: Packages, Access Protection, Importing Packages, Interfaces, Exception 08
Handling: Exception-Handling Fundamentals, Exception Types, Uncaught Exceptions, Using try and
catch, Multiple catch Clauses, Nested try Statements, throw, throws, finally, Java‟s Built-in Exceptions,
Creating Your Own Exception Subclasses, Chained Exceptions, Using Exceptions.
Text book 1: Ch 9, Ch 10
RBT: L1, L2
Module – 5
Enumerations, Type Wrappers, I/O, Applets, and Other Topics: I/O Basics, Reading Console Input, 08
Writing Console Output, The PrintWriter Class, Reading and Writing Files, Applet Fundamentals, The
transient and volatile Modifiers, Using instanceof, strictfp, Native Methods, Using assert, Static Import,
Invoking Overloaded Constructors Through this( ), String Handling: The String Constructors, String
Length, Special String Operations, Character Extraction, String Comparison, Searching Strings,
Modifying a String, Data Conversion Using valueOf( ), Changing the Case of Characters Within a String ,
Additional String Methods, StringBuffer, StringBuilder.
Text book 1: Ch 12.1,12.2, Ch 13, Ch 15
RBT: L1, L2
Course outcomes: The students should be able to:
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Explain the object-oriented concepts and JAVA.

 Develop computer programs to solve real world problems in Java.
Develop simple GUI interfaces for a computer program to interact with users
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Text Books:
1. Herbert Schildt, Java The Complete Reference, 7th Edition, Tata McGraw Hill, 2007. (Chapters 2, 3, 4,
5, 6,7, 8, 9,10, 12,13,15)
Reference Books:
1. Cay S Horstmann, "Core Java - Vol. 1 Fundamentals", Pearson Education, 10th Edition, 2016.
2. Raoul-Gabriel Urma, Mario Fusco, Alan Mycroft, "Java 8 in Action", Dreamtech Press/Manning Press,
1st Edition, 2014.

INTRODUCTION TO OPERATING SYSTEM

(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18CS654 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Explain the fundamentals of operating system
 Comprehend multithreaded programming, process management, memory management and
storage management.
 Familier with various types of operating systems
Module – 1 CH

Introduction: What OS do, Computer system organization, architecture, structure, Operations, 08

Process, memory and storage management, Protection and security, Distributed systems,
Special purpose systems, computing environments.

System Structure: OS Services, User OSI, System calls, Types of system calls, System
programs, OS design and implementation, OS structure, Virtual machines, OS generation,
system boot
Textbook1: Chapter 1, 2
RBT: L1, L2
Module – 2
Process Concept: Overview, Process scheduling, Operations on process, IPC, Examples in IPC, 08
Communication in client-server systems.

Multithreaded Programming: Overview, Models, Libraries, Issues, OS Examples

 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Textbook1: Chapter 3,4

RBT: L1, L2
Module – 3
Process Scheduling: Basic concept, Scheduling criteria, Algorithm, multiple processor 08
scheduling, thread scheduling, OS Examples, Algorithm Evaluation.

Synchronization: Background, the critical section problem, Petersons solution, Synchronization

hardware, Semaphores, Classic problems of synchronization, Monitors, Synchronization
examples, Atomic transactions
Textbook1: Chapter 5, 6
RBT: L1, L2
Module – 4
Deadlocks: System model, Deadlock characterization, Method of handling deadlock, Deadlock 08
prevention, Avoidance, Detection, Recovery from deadlock

Memory management strategies: Background, swapping, contiguous memory allocation,

paging, structure of page table, segmentation,

Textbook1: Chapter 7, 8
RBT: L1, L2
Module – 5
Virtual Memory management: Background, Demand paging, Copy-on-write, Page replacement, 08
allocation of frames, Trashing, Memory mapped files, Allocating Kernel memory, Operating
system examples

File system: File concept, Access methods, Directory structure, File system mounting, File
sharing, protection

Textbook1: Chapter 9, 10
RBT: L1, L2
Course outcomes: The students should be able to:
 Explain the fundamentals of operating system
 Comprehend process management, memory management and storage management.
 Familiar with various types of operating systems
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Text Books:
1. A. Silberschatz, P B Galvin, G Gagne, Operating systems, 7th edition, John Wiley and sons,.
Reference Books:
1. William Stalling,"Operating Systems: Internals and Design Principles", Pearson Education, 1st Edition,
2018.
2. Andrew S Tanenbaum, Herbert BOS, "Modern Operating Systems", Pearson Education, 4th Edition,
2016
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

MACHINE LEARNING LABORATORY

(Effective from the academic year 2018 -2019)
SEMESTER – VI
Subject Code 18AIL66 CIE Marks 40

Number of Contact Hours/Week 0:0:2 SEE Marks 60

Total Number of Lab Contact Hours Exam Hours 3 Hrs

Credits – 2
Course Learning Objectives: This course will enable students to:

 Implement and evaluate ML algorithms in Python/Java programming language.

Descriptions (if any):
1. The programs can be implemented in either JAVA or Python.
2. Data sets can be taken from standard repository such as UCI
Installation procedure of the required software must be demonstrated, carried out in groups and
documented in the journal.
Programs List:
1. Implement and demonstratetheFIND-Salgorithm for finding the most specific
hypothesis based on a given set of training data samples. Read the training data from a
.CSV file and show the output for test cases. Develop an interactive program by
Comparing the result by implementing LIST THEN ELIMINATE algorithm.
2 For a given set of training data examples stored in a .CSV file, implement and
demonstrate the Candidate-Eliminationalgorithm. Output a description of the set
of all hypotheses consistent with the training examples.
3 Demonstrate Pre processing (Data Cleaning, Integration and Transformation) activity on
suitable data:
For example:
Identify and Delete Rows that Contain Duplicate Data by considering an appropriate
dataset.
Identify and Delete Columns That Contain a Single Value by considering an appropriate
dataset.
4 Demonstrate the working of the decision tree based ID3 algorithm. Use an appropriate data
set for building the decision tree and apply this knowledge toclassify a new sample.
5 Demonstrate the working of the Random forest algorithm. Use an appropriate data set for
building and apply this knowledge toclassify a new sample.
6 Implement the naïve Bayesian classifier for a sample training data set stored as a .CSV file.
Compute the accuracy of the classifier, considering few test data sets.
7 Assuming a set of documents that need to be classified, use the naive Bayesian
Classifier model to perform this task. Calculate the accuracy, precision, and recall for your
data set.
8 Construct aBayesian network considering medical data. Use this
model to demonstrate the diagnosis of heart patients using standard Heart Disease
Data Set.
9 Demonstrate the working of EM algorithm to cluster a set of data stored in a .CSV file.
10 Demonstrate the working of SVM classifier for a suitable data set

Laboratory Outcomes: The student should be able to:

 Implement and demonstration of ML algorithms.

 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Evaluation of different algorithms.

Conduct of Practical Examination:

 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the lot
with equal opportunity.
o For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accordance with university regulations)
m) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks

n) For laboratories having PART A and PART B

i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

DATA SCIENCE LABORATORY

(Effective from the academic year 2018 -2019) (Artificial Intelligence and Data Science)
SEMESTER – VI
Subject Code 18ADL67 CIE Marks 40
Number of Contact Hours/Week 0:2:2 SEE Marks 60
Total Number of Lab Contact Hours Exam Hours 03
CREDITS – 2
Course Learning Objectives: This course will enable students to:
1. Recognize and implement various ways of selecting suitable model parameters for different Data
Science techniques.
2. Integrate machine learning, deep learning libraries and mathematical and statistical tools that are
suitable for the Data Science applications under consideration.
Descriptions (if any): --
 Write the programs using Python/R/any other Programming Language
 Execute the programs in either Visual Studio Code or PyCharm Community Edition or any other
suitable environment
 Use appropriate libraries as needed to execute the programs.

A study was conducted to understand the effect of number of hours the students spent studying on their
performance in the final exams. Write a code to plot line chart with number of hours spent studying on
x-axis and score in final exam on y-axis. Use a red „*‟ as the point character, label the axes and give the
plot a title.

Number of hrs spent studying (x) Score in the final exam (0 – 100) (y)
10 95

1 9 80
2 10
15 50
10 45
16 98
11 38
16 93

For the given dataset mtcars.csv (www.kaggle.com/ruiromanini/mtcars), plot a histogram to check the
2
frequency distribution of the variable „mpg‟ (Miles per gallon)
Consider the books dataset BL-Flickr-Images-Book.csv from Kaggle
(https://www.kaggle.com/adeyoyintemidayo/publication-of-books) which contains information about
books. Write a program to demonstrate the following.
3
1. Import the data into a DataFrame
2. Find and drop the columns which are irrelevant for the book information.
3. Change the Index of the DataFrame
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

4. Tidy up fields in the data such as date of publication with the help of simple regular expression.
Combine str methods with NumPy to clean columns
Train a regularized logistic regression classifier on the iris dataset
(https://archive.ics.uci.edu/ml/machine-learning-databases/iris/ or the inbuilt iris dataset) using
4
sklearn.Train the model with the following hyperparameter C = 1e4 and report the best classification
accuracy.
Train an SVM classifier on the iris dataset using sklearn. Try different kernels and the associated
hyperparameters. Train model with the following set of hyperparameters RBF-kernel, gamma=0.5, one-
5 vs-rest classifier, no-feature-normalization. Also try C=0.01,1,10C=0.01,1,10. For the above set of
hyperparameters, find the best classification accuracy along with total number of support vectors on the
test data.

6 Consider the following dataset. Write a program to demonstrate the working of the decision tree based
ID3 algorithm.
Price Maintenance Capacity Airbag Profitable
Low Low 2 No Yes
Low Med 4 Yes Yes
Low Low 4 No Yes
Low Med 4 No No
Low High 4 No No
Med Med 4 No No
Med Med 4 Yes Yes
Med High 2 Yes No

Med High 5 No Yes

High Med 4 Yes Yes
high Med 2 Yes Yes
High High 2 Yes No
high High 5 yes Yes

7 Consider the dataset spiral.txt (https://bit.ly/2Lm75Ly). The first two columns in the dataset
corresponds to the co-ordinates of each data point. The third column corresponds to the actual cluster
label. Compute the rand index for the following methods:
1. K – means Clustering
2. Single – link Hierarchical Clustering
3. Complete link hierarchical clustering.
Also visualize the dataset and which algorithm will be able to recover the true clusters.

8 Implement a k-Nearest Neighbor algorithm to classify the iris dataset. Print out both correct and wrong
predictions.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Laboratory Outcomes: The student should be able to illustrate the following operations:
 Demonstrate proficiency with statistical analysis of data.
 Illustrate the ability to build and assess data-based models.
 Optimize the data using SVM Classifiers.
 Apply clustering algorithms and logistic regressions on data sets.

Conduct of Practical Examination:

 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the
lot with equal opportunity.
o For laboratories having PART A: Students are allowed to pick one experiment from PART A,
with equal opportunity. The mini project from PART B to be run &exhibit the results also a
report on the work is produced.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 Marks Distribution (Subjected to change in accordance with university regulations)
o) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks
p) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

MOBILE APPLICATION DEVELOPMENT

Laboratory
(Effective from the academic year 2018 -2019)
SEMESTER – VI
Course Code 18ADMP68
18AIL68 IA Marks 40
Number of Contact Hours/Week 0:0:2 Exam Marks 60
Total Number of Contact Hours 3 Hours/Week Exam Hours 03
CREDITS – 02
Laboratory Objectives: This laboratory will enable students to
 Learn and acquire the art of AndroidProgramming.
 Configure Android studio to run theapplications.
 Understand and implement Android's User interfacefunctions.
 Create, modify and query on SQlitedatabase.
 Inspect different methods of sharing data usingservices.
Descriptions (if any):

1. Installation procedure of the Android Studio/Java software must be demonstrated and carried out
ingroups.
2. Students should use the latest version of Android Studio/Java/Kotlin to execute these programs.
Diagrams given are for representational purpose only, students are expected to improvise on
it.
3. Part B programs should be developed as an application and be demonstrated as a mini project in a
group by adding extra features or the students can also develop their own application and
demonstrate it as a mini project. (Projects/programs are not limited to the list given in Part B)
Programs List:
PART – A
1 Create an application to design aVisiting Card. The Visiting card should
haveacompanylogoatthe top right corner. The company name should be displayed in Capital
letters, aligned to the center. Information like the name of the employee, job title, phone number,
address, email, fax and the website address isto be displayed. Insert a horizontal line between the
job title and the phone number.

2 Develop an Android application usingcontrols like Button, TextView, EditText for designing a
calculatorhaving basic functionality like Addition, Subtraction, Multiplication,andDivision.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

3 Create a SIGN Up activity with Username and Password. Validation of password should happen
based on the following rules:

 Password should contain uppercase and lowercaseletters.

 Password should contain letters andnumbers.
 Password should contain specialcharacters.
 Minimum length of the password (the default value is8).

On successful SIGN UP proceed to the next Login activity. Here the user should SIGN IN using
the Username and Password created during signup activity. If the Username and Password are
matched then navigate to the next activity whichdisplays a message saying “Successful Login” or
else display a toast message saying “Login Failed”.The user is given only two attempts and after
thatdisplay a toast message saying “Failed Login Attempts” and disable the SIGN IN button. Use
Bundle to transfer information from one activity to another.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

4 Develop an application to set an image as wallpaper. On click of a button, the wallpaper image should
start to change randomly every 30 seconds.

5 Write a program to create an activity with two buttons START and STOP. On pressin g of the
START button, the activity must start the counter by displaying the numbers from One and the
counter must keep on counting until the STOP button is pressed. Display the counter value in a
TextViewcontrol.

6 Create two files of XML and JSON type with values for City_Name, Latitude, Longitude,
Temperature, and Humidity. Develop an application to create an activity with two buttons to parse
the XML and JSON files which when clicked should display the data in their respective layouts side
by side.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

7 Develop a simple application with one Edit Text so that the user can write some text in it. Create a
button called “Convert Text to Speech” that converts the user input text into voice.

8 Create an activity like a phone dialer with CALL and SAVE buttons. On pressing the CALL
button, it must call the phone number and on pressing the SAVE button it must save the number
to the phonecontacts.

PART - B

1 Write a program to enter Medicine Name, Date and Time of the Day as input from the user and
store it in the SQLite database. Input for Time of the Day should be either Morning or Afternoon
or Evening or Night. Trigger an alarm based on the Date and Time of the Day and display the
Medicine Name.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

2 Develop a content provider application with an activity called “Meeting Schedule” which takes
Date, Time and Meeting Agenda as input from the user and store this information into the SQLite
database. Create another application with an activity called “Meeting Info” having DatePicker
control, which on the selection of a date should display the Meeting Agenda information for that
particular date, else it should display a toast message saying “No Meeting on this Date”.

3 Create an application to receive an incoming SMS which is notified to the user. On clicking this
SMS notification, the message content and the number should be displayed on the screen. Use
appropriate emulator control to send the SMS message to your application.

4 Write a program to create an activity having a Text box, and also Save, Open and Create buttons.
The user has to write some text in the Text box. On pressing the Create button the text should be
saved as a text file in MkSDcard. On subsequent changes to the text, the Save button should be
pressed to store the latest content to the same file. On pressing the Open button, it should display
the contents from the previously stored files in the Text box. If the user tries to save the contents
in the Textbox to a file without creating it, then a toast message has to be displayed saying “First
Create aFile”.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

5 Create an application to demonstrate a basic media player that allows the user to Forward,
Backward, Play and Pause an audio. Also, make use of the indicator in the seek bar to move the
audio forward or backward as required.

6 Develop an application to demonstrate the use of Asynchronous tasks in android. The

asynchronous task should implement the functionality of a simple moving banner. On pressing the
Start Task button, the banner message should scroll from right to left. On pressing the Stop Task
button, the banner message should stop. Let the banner message be “Demonstration of
Asynchronous Task”.

7 Develop an application that makes use of the clipboard framework for copying and pasting of the
text. The activity consists of two Edit Text controls and two Buttons to trigger the copy and paste
functionality.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

8 Create an AIDL service that calculates Car Loan EMI. The formula to calculate EMI is

E = P * (r(1+r)n)/((1+r)n-1)
where
E = The EMI payable on the car loan amount
P = The Car loan Principal Amount
r = The interest rate value computed on a monthly basis
n = The loan tenure in the form of months

The down payment amount has to be deducted from the principal amount paid towards buying the
Car. Develop an application that makes use of this AIDL service to calculate the EMI. This
application should have four Edit Text to read the Principal Amount, Down Payment, Interest
Rate, Loan Term (in months) and a button named as “Calculate Monthly EMI”. On click of this
button, the result should be shown in a Text View. Also, calculate the EMI by varying the Loan
Term and Interest Rate values.

Laboratory Outcomes: After studying these laboratory programs, students will be able to

 Create, test and debug Android application by setting up Android developmentenvironment.

 Implement adaptive, responsive user interfaces that work across a wide range ofdevices.
 Infer long running tasks and background work in Androidapplications.
 Demonstrate methods in storing, sharing and retrieving data in Androidapplications.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Infer the role of permissions and security for Androidapplications.

Procedure to Conduct Practical Examination

 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one
experiment from the lot with equal opportunity.
o For laboratories having PART A and PART B: Students are allowed to pick
one experiment from PART A with equal opportunity and in Part B
demonstrate the Mini project.
 Change of experiment is allowed only once and marks allotted for procedure to be
made zero of the changed part only.
 Marks Distribution (Subjected to change in accoradance with university regulations)
q) For laboratories having only one part – Procedure + Execution + Viva-Voce:
15+70+15 = 100 Marks
r) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks
Text Books:
1. Google Developer Training, "Android Developer Fundamentals Course – Concept
Reference”, Google Developer Training Team, 2017.
https://www.gitbook.com/book/google-developer-training/android-developer-fundamentals-
course-concepts/details
(Download pdf file from the above link)
Reference Books:
1. Erik Hellman, “Android Programming – Pushing the Limits”, 1st Edition, Wiley India Pvt Ltd,
2014. ISBN-13: 978-8126547197
2. Dawn Griffiths and David Griffiths, “Head First Android Development”, 1st Edition, O‟Reilly
SPD Publishers, 2015. ISBN-13:978-9352131341
3. Bill Phillips, Chris Stewart and Kristin Marsicano, “Android Programming: The Big Nerd
Ranch Guide”, 3rd Edition, Big Nerd Ranch Guides, 2017. ISBN-13:978-0134706054
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

ADVANCED ARTIFICIAL INTLLIGENCE

(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI71 CIE Marks 40
Number of Contact Hours/Week 4:0:0 SEE Marks 60
Total Number of Contact Hours 50 Exam Hours 3 Hrs
CREDITS –4
Course Learning Objectives: This course will enable students to:
 Demonstrate the fundamentals of Intelligent Agents
 Illustrate the reasoning on Uncertain Knowledge
 Explore the explanation based learning in solving AI problems
 Demonstrate the applications of Rough sets and Evolutionary Computing algorithms
Module 1 Contact
Hours
IntelligentAgents: Agents and Environments, Good Behavior: The Concept of Rationality, The 10
Nature of Environments, The Structure of Agents
Problem Solving :Game Paying
T1: Chapter 2, Chapter 5 (2.1 to 2.4, 5.1 to 5.6)

Module 2
Uncertain knowledge and Reasoning:Quantifying Uncertainty, Acting under Uncertainty , 10
Basic Probability Notation, Inference Using Full Joint Distributions, Independence , Bayes‟Rule
and Its Use The WumpusWorld Revisited,
T1: Chapter 13

Module 3
Probabilistic Reasoning, Representing Knowledge in an Uncertain Domain, The Semantics of 10
Bayesian Networks , Efficient Representation of Conditional Distributions Exact Inference in
Bayesian Networks, Approximate Inference in Bayesian Networks.
T1: Chapter 14
Module 4
Perception: Image Formation, Early Image-Processing Operation, Object Recognition by 10
Appearance, Reconstructing the 3DWorld. Object Recognition from Structural Information,
Using Vision
T1: Chapter 24
Module 5
Overview and language modeling: Overview: Origins and challenges of NLP-Language and 10
Grammar-Processing Indian Languages- NLP Applications-Information Retrieval. Language
Modeling: Various Grammar- based Language Models-Statistical Language Model.
T2: Chapter 1, 2
Course Outcomes: The student will be able to :
 Demonstrate the fundamentals of Intelligent Agents
 Illustrate the reasoning on Uncrtain Knowledge
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Explore the explanation based learning in solving AI problems

 Demonstrate the applications of Rough sets and Evolutionary Computing algorithms

Question Paper Pattern:

 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Artificial Intelligence, A Modern Approach, Stuart J. Russell and Peter Norvig, Third Edition, Pearson,
2010
2. Tanveer Siddiqui, U.S. Tiwary, “Natural Language Processing and Information Retrieval”, Oxford
University Press, 2008.

Reference Books:
1. An Introduction to Multi Agent Systems, Michael Wooldridge, Second Edition, John Wiley & Sons
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

DATA VISUALIZATION
(Effective from the academic year 2018 -2019) (Artificial Intelligence and Data Science)
SEMESTER – VII
Subject Code 18AD72 CIE Marks 40
Number of Contact Hours/Week 4:0:0 SEE Marks 60
Total Number of Contact Hours 50 Exam Hours 3 Hrs
CREDITS –4
Course Learning Objectives: This course will enable students to:
 To understand the essential acquisition techniques
 To analyse and visualize data
 To gain hands-on experience of using software tools for data analytics
Module 1 Contact
Hours
The Importance of Data Visualization and Data Exploration 10
Introduction: Data Visualization, Importance of Data Visualization, Data Wrangling, Tools
and Libraries for Visualization
Overview of Statistics: Measures of Central Tendency, Measures of Dispersion, Correlation,
Types od Data, Summary Statistics
Numpy: NumpyOpertaions - Indexing, Slicing, Splitting, Iterating, Filtering, Sorting,
Combining, and Reshaping
Pandas: Advantages of pandas over numpy, Disadvantages of pandas, Pandas operation -
Indexing, Slicing, Iterating, Filtering, Sorting and Reshaping using Pandas
Text Book 1: Chapter 1
RBT: L1,L2
Module 2
Plots 10
Comparison Plots: Line Chart, Bar Chart and Radar Chart; Relation Plots: Scatter Plot,
Bubble Plot , Correlogram and Heatmap; Composition Plots: Pie Chart, Stacked Bar Chart,
Stacked Area Chart, Venn Diagram; Distribution Plots: Histogram, Density Plot, Box Plot,
Violin Plot; Geo Plots: Dot Map, Choropleth Map, Connection Map; What Makes a Good
Visualization?
A Deep Dive into Matplotlib
Introduction, Overview of Plots in Matplotlib, Pyplot Basics: Creating Figures, Closing
Figures, Format Strings, Plotting, Plotting Using pandas DataFrames, Displaying Figures,
Saving Figures; Basic Text and Legend Functions: Labels, Titles, Text, Annotations,
Legends; Basic Plots:Bar Chart, Pie Chart, Stacked Bar Chart, Stacked Area Chart,
Histogram, Box Plot, Scatter Plot, Bubble Plot; Layouts: Subplots, Tight Layout, Radar
Charts, GridSpec; Images: Basic Image Operations, Writing Mathematical Expressions
Text Book 1: Chapter 2, Chapter 3
RBT: L1,L2, L3
Module 3
Simplifying Visualizations using Seaborn 10
Introduction, Advantages of Seaborn Controlling Figure Aesthetics: Seaborn Figure Styles,
Removing Axes Spines, Contexts; Color Palettes: Categorical Color Palettes, Sequential
Color Palettes, Diverging Color Palettes; Interesting Plots in Seaborn: Bar Plots, Kernel
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Density Estimation, Plotting Bivariate Distributions, Visualizing Pairwise Relationships,

Violin Plots;
Text Book 1: Chapter 4
RBT: L1,L2, L3
Module 4
Plotting Geospatial Data 10
Introduction, Geoplotlib, The Design Principles of Geoplotlib, Geospatial Visualizations,
Tile Providers, Custom Layers, Introduction to Folium
Visualizing Data:Building a Google map from geocoded data, Visualizing networks and
interconnection and Visualizing mail data
Making Things Interactive with Bokeh
Introduction, Bokeh, Concepts of Bokeh, Interfaces in Bokeh, Output, Bokeh Server,
Presentation, Integrating, Adding Widgets
Text Book 1: Chapter5, Chapter 6
RBT: L1,L2, L3
Module 5
Networked Programs 10
HyperText Transfer Protocol – HTTP, The World‟s Simplest Web Browser, Retrieving an
image over HTTP, Retrieving web pages with urllib, Parsing HTML and scraping the web,
Parsing HTML using regular expressions, Parsing HTML using BeautifulSoup, Reading
binary files using urllib
Using Web Services
eXtensible Markup Language – XML, Parsing XML, Looping through nodes, JavaScript
Object Notation – JSON, Parsing JSON
Text Book 2: Chapters 12 and Chapter 13
RBT: L1,L2, L3
Course Outcomes: At the end of the course students should be able to:
 Understand and use various plot types with Python
 Explore and work with different plotting libraries
 Create effective visualizations
 Implement exemplary applications related to Network Programming and Web Service
 Exhibit the awareness of the importance and limitation of the exploratory data analysis paradigm
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Data Visualization workshop, Tim Grobmann and Mario Dobler, Packt Publishing
2. Python for Everybody: Exploring Data Using Python 3, Charles R. Severance, Create Space
Independent Publishing Platform, 1st Edition, 2016
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Reference Books:
1. “Data Visualization”: A Successful Design Process, Kirk, Andy, Packt Publishing Ltd,2012
2. Think Python: How to Think Like a Computer Scientist ,Allen B. Downey, Green Tea Press, 2nd
Edition, 2015
3. Interactive Data visualization for the Web, Murray, Scott, O‟Reilly Media, Inc., 2013
4. Visualizing Data: Exploring and Explaining Data with The Processing Environment, Fry, Ben, O‟Reilly
Media, Inc., 2007

INTERNET OF THINGS
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI731 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Assess the genesis and impact of IoT applications, architectures in real world.
 Illustrate diverse methods of deploying smart objects and connect them to network.
 Compare different Application protocols for IoT.
 Infer the role of Data Analytics and Security in IoT.

Module 1 Contact
Hours
What is IoT, Genesis of IoT, IoT and Digitization, IoT Impact, Convergence of IT and IoT, IoT 08
Challenges, IoT Network Architecture and Design, Drivers Behind New Network Architectures,
Comparing IoT Architectures, A Simplified IoT Architecture, The Core IoT Functional Stack, IoT
Data Management and Compute Stack.
Textbook 1: Ch.1, 2
RBT: L1, L2, L3
Module 2
Smart Objects: The “Things” in IoT, Sensors, Actuators, and Smart Objects, Sensor Networks, 08
Connecting Smart Objects, Communications Criteria, IoT Access Technologies.
Textbook 1: Ch.3, 4
RBT: L1, L2, L3
Module 3
IP as the IoT Network Layer, The Business Case for IP, The need for Optimization, Optimizing 08
IP for IoT, Profiles and Compliances, Application Protocols for IoT, The Transport Layer, IoT
Application Transport Methods.
Textbook 1: Ch.5, 6
RBT: L1, L2, L3
Module 4
Data and Analytics for IoT, An Introduction to Data Analytics for IoT, Machine Learning, Big 08
Data Analytics Tools and Technology, Edge Streaming Analytics, Network Analytics, Securing
IoT, A Brief History of OT Security, Common Challenges in OT Security, How IT and OT
Security Practices and Systems Vary, Formal Risk Analysis Structures: OCTAVE and FAIR, The
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Phased Application of Security in an Operational Environment

Textbook 1: Ch.7, 8
RBT: L1, L2, L3
Module 5
IoT Physical Devices and Endpoints – Arduino UNO: Introduction to Arduino, Arduino UNO, 08
Installing the Software, Fundamentals of Arduino Programming. IoT Physical Devices
and Endpoints –RaspberryPi: Introduction to RaspberryPi, About the RaspberryPi Board:
Hardware Layout, Operating Systems on RaspberryPi, Configuring RaspberryPi, Programming
RaspberryPi with Python, Wireless Temperature Monitoring System Using Pi, DS18B20
Temperature Sensor, Connecting Raspberry Pi via SSH, Accessing Temperature from DS18B20
sensors, Remote access to RaspberryPi, Smart and Connected Cities, An IoT Strategy for Smarter
Cities, Smart City IoT Architecture, Smart City Security Architecture, Smart City Use-Case
Examples.
Textbook 1: Ch.12
Textbook 2: Ch.7.1 to 7.4, Ch.8.1 to 8.4, 8.6
RBT: L1, L2, L3
Course Outcomes: The student will be able to :
 Interpret the impact and challenges posed by IoT networks leading to new architectural models.
 Compare and contrast the deployment of smart objects and the technologies to connect them to
network.
 Appraise the role of IoT protocols for efficient network communication.
 Elaborate the need for Data Analytics and Security in IoT.
 Illustrate different sensor technologies for sensing real world entities and identify the applications of
IoT in Industry.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. David Hanes, Gonzalo Salgueiro, Patrick Grossetete, Robert Barton, Jerome Henry,”IoT
Fundamentals: Networking Technologies, Protocols, and Use Cases for the Internet of Things”,
1stEdition, Pearson Education (Cisco Press Indian Reprint). (ISBN: 978-9386873743)
2. Srinivasa K G, “Internet of Things”,CENGAGE Leaning India, 2017
Reference Books:
1. Vijay Madisetti and ArshdeepBahga, “Internet of Things (A Hands-on-Approach)”, 1stEdition,
VPT, 2014. (ISBN: 978-8173719547)
2. Raj Kamal, “Internet of Things: Architecture and Design Principles”, 1st Edition, McGraw Hill
Education, 2017. (ISBN: 978-9352605224)
Mandatory Note:
Distribution of CIE Marks is a follows (Total 40 Marks):
 20 Marks through IA Tests
 20 Marks through practical assessment
Maintain a copy of the report for verification during LIC visit.
Posssible list of practicals:
1. Transmit a string using UART
2. Point-to-Point communication of two Motes over the radio frequency.
3. Multi-point to single point communication of Motes over the radio frequency.LAN (Sub-
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

netting).
4. I2C protocol study
5. Reading Temperature and Relative Humidity value from the sensor

ADVANCED DATA ANALYTICS

(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AD732 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 Understand the knowledge of mathematics to explain the concept of data Analytics
 Design Supervised and un supervised ML to predict the class for a given data
 Analyze the given data set, and solve a problem by performing Classification using the basics of
mathematics and data science/Analytics
 Develop solutions to group entities in data set and apply it for the given real-world data using the basic
knowledge of similarity, neighbors and clustering
Module – 1 Contact
Hours
SciPy Library for statistics: 08
Basic statistics, Parameter techniques for computing means, Non parameter techniques for
computing means, The ndimage sub-package.
Time series object, Determining stationarity, making time series Stationary, ARIMA
modelling
Text Book 1: Chapter 9, Chapter 11

RBT: L1, L2
Module – 2
Supervised Machine learning Ensemble techniques: 08
Bagging, random Forest, Extra trees, Ada Boosting, Gradient Boosting
Text Book 1: Chapter 15

RBT: L1, L2
Module – 3
Machine learning for Text Data: 08
Text Mining, Sentimental analysis, text similarity techniques, Unsupervised ML for
grouping similar text and supervised ML.
Transfer Learning for Text Data
Text Book 1: Chapter 16 , Chapter 19.1(19.1.1 to 19.1.6) only

RBT: L1, L2, L3

Module – 4
Machine Learning for Image Data 08
Image acquisition, Image similarity, USL Grouping similar images, SL for image
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

classification
Transfer Learning for Image data
Text Book 1: Chapter 17 and chapter 20.1 (20.1.1 to 20.1.6)only

RBT: L1, L2,L3

Module – 5
Unsupervised ML algorithms: 08
Dimensionality reduction, Clustering
Reinforcement Learning, Federated Learning ,GNN, GAN
Textbook 1: Chapter 12 and Chapter 22

RBT: L1, L2, L3

Course outcomes: The students should be able to:
 Apply the knowledge of mathematics to explain the concept of data analytics
 Develop models of supervised and Un supervised ML techniques.
 Analyze the given data set, and solve a problem by performing Classification using the basics of
mathematics and data analytics
 Develop solutions to group entities in data set and apply it for the given real-world data using the basic
knowledge of similarity, neighbors and clustering
 Analyze the importance of mining text and image data for Data analytics
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Data Analytics using Python , Bharti Motwani, Wiley 2020
Reference Books:
1. Cathy O‟Neil and Rachel Schutt, Doing Data Science, O‟Reilly, 2014.
2. Hector Cuesta, Practical Data Analysis, PACKT Publishing, 2013
3. Michael R. Berthold, Christian Borgelt, Frank Hijppner Frank Klawonn, Guide to Intelligent Data
Analysis, Springer-Verlag London Limited, 2010
4. Data Analytics using R, Bharti Motwani, Wiley, 2020

BLOCKCHAIN TECHNOLOGY
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI733 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Course Learning Objectives: This course will enable students to:

 Define and Explain the fundamentals of Blockchain
 Illustrate the technologies of blockchain
 Decribe the models of blockchain
 Analyze and demonstrate the Ethereum
Module – 1 Contact
Hours
Blockchain 101: Distributed systems, History of blockchain, Introduction to 08
blockchain, Types of blockchain, CAP theorem and blockchain, Benefits and
limitations of blockchain.
Text Book 1: Chapter 1

Module-2
Decentralization and Cryptography: 08
Decentralization using blockchain, Methods of decentralization, Routes to
decentralization, Decentralized organizations.
Cryptography and Technical Foundations: Cryptographic primitives, Asymmetric
cryptography, Public and private keys
Text Book 1: Chapter 2, Chapter 4
Module-3
Bitcoin and Alternative Coins 08
A: Bitcoin, Transactions, Blockchain, Bitcoin payments
B: Alternative Coins
Theoretical foundations, Bitcoin limitations, Namecoin, Litecoin, Primecoin, Zcash
Text Book 1: Chapter 3, Chapter 6, Chapter 8
Module-4
Smart Contracts and Ethereum 101: 08
Smart Contracts: Definition, Ricardian contracts.
Ethereum 101: Introduction, Ethereum blockchain, Elements of the Ethereum
blockchain, Precompiled contracts.
Text Book 1: Chapter 10
Module-5
Alternative Blockchains: Blockchains 08
Blockchain-Outside of Currencies: Internet of Things, Government, Health, Finance,
Media
Text Book 1: Chapter 17
Course outcomes: The students should be able to:
 Define and Explain the fundamentals of Blockchain
 Illustrate the technologies of blockchain
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Decribe the models of blockchain

Analyze and demonstrate the Ethereum
Analyze and demonstrate Hyperledger fabric
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbook:

1. Mastering Blockchain - Distributed ledgers, decentralization and

smart contracts explained, Imran Bashir, Packt Publishing Ltd,
Second Edition, ISBN 978-1-78712-544-5, 2017

Reference Books:
1. Blockchain Technology (Concepts and applications), Kumar saurabh, Ashutosh saxena,
Wiley, 2020
2. Bitcoin and Cryptocurrency Technologies, Arvind Narayanan, Joseph Bonneau, Edward
Felten,2016
3. Blockchain Basics: A Non-Technical Introduction in 25 Steps, Daniel Drescher, Apress, First
Edition, 2017
3. Mastering Bitcoin: Unlocking Digital Cryptocurrencies, Andreas M. Antonopoulos, O'Reilly
Media, First Edition, 2014

CLOUD COMPUTING AND VIRTUALIZATION

(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI734 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This coursewill enable students to:
 Interpret the data in the context of cloud computing.
 Identify an appropriate method to analyze the data in cloud enviornmnet
 Understanding of virtalization concept
Module – 1 Contact
Hours
Introduction, Cloud Infrastructure: Cloud computing, Cloud computing delivery 08
models and services, Ethical issues, Cloud vulnerabilities, Cloud computing at
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Amazon, Cloud computing the Google perspective, Microsoft Windows Azure and
online services, Open-source software platforms for private clouds, Cloud storage
diversity and vendor lock-in, Energy use and ecological impact, Service level
agreements, Exercises and problems.

Textbook 1: Chapter 1 ( 1.3-1.6), Chapter 3 (3.1-3.5, 3.7,3.8)

RBT: L1, L2
Module – 2
Cloud Computing: Application Paradigms.: Challenges of cloud computing, 08
Architectural styles of cloud computing, Workflows: Coordination of multiple
activities, Coordination based on a state machine model: The Zookeeper, The Map
Reduce programming model, A case study: The GreThe Web application, Cloud for
science and engineering, High-performance computing on a cloud, Cloud computing
for Biology research, Social computing, digital content and cloud computing.

Textbook 1: Chapter 4 (4.1-4.11)

RBT:L1,L2

Module – 3
Cloud Resource Virtualization: Virtualization, Layering and virtualization, Virtual 08
machine monitors, Virtual Machines, Performance and Security Isolation, Full
virtualization and paravirtualization, Hardware support for virtualization, Case Study:
Xen a VMM based paravirtualization, Optimization of network virtualization,
vBlades, Performance comparison of virtual machines, The dark side of
virtualization, Exercises and problems

Textbook 1: Chapter 5 (5.1-5.9, 5.11,5.12,5.16)

RBT:L1,L2
Module – 4
08
Cloud Resource Management and Scheduling: Policies and mechanisms for resource
management, Application of control theory to task scheduling on a cloud, Stability of
a two-level resource allocation architecture, Feedback control based on dynamic
thresholds, Coordination of specialized autonomic performance managers, A utility-
based model for cloud-based Web services, Resourcing bundling: Combinatorial
auctions for cloud resources, Scheduling algorithms for computing clouds, Fair
queuing, Start-time fair queuing, Borrowed virtual time, Cloud scheduling subject to
deadlines, Scheduling MapReduce applications subject to deadlines, Resource
management and dynamic scaling, Exercises and problems.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Textbook1: Chapter 6 (6.1-6.14, 6.16)

RBT : L1, L2, L3

Module – 5
08
Cloud Security, Cloud Application Development: Cloud security risks, Security:
The top concern for cloud users, Privacy and privacy impact assessment,
Trust, Operating system security, Virtual machine Security, Security of virtualization,
Security risks posed by shared images, Security risks posed by a management OS, A
trusted virtual machine monitor, Amazon web services: EC2 instances,
Connecting clients to cloud instances through firewalls, Security rules for application
and transport layer protocols in EC2, How to launch an EC2 Linux instance and
connect to it, How to useS3 in java

Textbook1: Chapter 9 (9.1-9.9, 11.1-11.5)

RBT: L1, L2, L3

Course outcomes: The students should be able to:
 Understand the concepts of cloud computing, virtualization and classify services of cloud
computing
 Illustrate architecture and programming in cloud
 Define the platforms for development of cloud applications and List the application of
cloud.

Question Paper Pattern:

 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Text Books:
1. Cloud Computing Theory and Practice, Dan C. Marinescu, Morgan Kaufmann, Elsevier 2013.
Reference Books:
1. Mastering Cloud Computing Rajkumar Buyya, Christian Vecchiola, and ThamaraiSelvi McGraw Hill
Education

FUZZY LOGIC AND ITS APPLICATION

(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI741 CIE Marks 40
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Number of Contact Hours/Week 3:0:0 SEE Marks 60

Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 Define crisp set and fuzzy set theory.
 Identify the requirements to make calculation of fuzzy set theory.
 Describe fuzzy arithmetic principles.
 Explain fuzzy rules based systems.
 Apply fuzzy graphical techniques to draw inference over the computing problems.
Module – 1 Contact
Hours
Introduction: Historical perspective, utility of fuzzy systems, limitations of fuzzy systems, 08
statistics andrandom processes, uncertainty in information, fuzzy sets and membership,
chance versus fuzziness, sets aspoints in Hypercube.Classical Sets and Fuzzy Sets:
classical sets, operations on them, mapping of classical sets to functions, fuzzysets, fuzzy
set operations, properties of fuzzy sets, non-interactive fuzzy sets.
RBT: L1, L2
Module – 2
Classical Relations and Fuzzy Relations: Cartesian Product, Crisp Relations – Cardinality 08
of Crisp Relations,Operations on Crisp Relations, and Properties of Crisp Relations,
Composition. Fuzzy Relations –Cardinalityof Fuzzy Relations, Operations on Fuzzy
Relations, Properties of Fuzzy Relations, Fuzzy Cartesian Productand Composition, Non-
interactive Fuzzy Sets.
RBT: L1, L2
Module – 3
Membership Functions: Features of the Membership Function, Standard Forms and 08
Boundaries,Fuzzification, defuzzification to crisp sets, Lambda-Cuts for Fuzzy Sets,
Lambda-Cuts for Fuzzy Relations,DefuzzificationMethods.Development of membership
Functions: Membership value assignments
RBT: L1, L2
Module – 4
Fuzzy Arithmetic and the Extension Principle : Crisp Functions, Mapping and Relations, 08
Functions of fuzzySets – Extension Principle, Fuzzy Transform (Mapping), Practical
Considerations. Fuzzy Numbers IntervalAnalysis in Arithmetic, Approximate Methods of
Extension – Vertex method, DSW Algorithm, RestrictedDSW Algorithm, Comparisons.
Fuzzy Vectors.
RBT: L1, L2
Module – 5
Fuzzy Rule Based Systems: Natural Language, Linguistic Hedges, Rule-Based Systems – 08
Canonical RuleForms, Decomposition of Compound Rules, Likelihood and Truth
Qualification, Aggregation of Fuzzy Rules.Graphical Techniques of Inference.
RBT: L1, L2
Course outcomes: The students should be able to:
 Provide basic elements of fuzzy sets.
 Differentiate between fuzzy set and classical set theory.
 Apply fuzzy membership functions to solve value assignment problems.
 Explain approximate methods of fuzzy arithmetic and extension principle.
 Discuss the applications of fuzzy rule based systems.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Question Paper Pattern:

 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Fuzzy Logic with EngineeringApplicationsTimothy J. Ross Wiley IndiaInternational edition,2010
reprint
Reference Books:
1. Fuzzy Logic- Intelligence,Control, and informationJohnYenRezaLangariPearson Education 1st
Edition, 2004
2. Fuzzy Sets and Fuzzy Logic-Theory and ApplicationsGeorge J. KlirBoYuanPrentice Hall of India
1st Edition, 2000
3. Fuzzy Mathematical approach to pattern Recognition, S K Pal, and D Dutta majumder , John
wiley 1986
4. Neuro-fuzzy pattern recognition: methods in Soft computing, S K Pal and S Mitra
5. Fuzzy set theory and its applications by H J Zimmermann, Springer Publications

IMAGE PROCESSING
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AD742 40
CIE Marks

Number of Contact Hours/Week 3:0:0 SEE Marks 60

Total Number of Contact Hours 40 Exam Hours 3 Hrs

CREDITS – 03

Course Learning Objectives: This course will enable students to:

 Understand the fundamentals of digital image processing

 Understand the image transform used in digital image processing
 Understand the image enhancement techniques used in digital image processing
 Understand the image restoration techniques and methods used in digital image processing
 Understand the Morphological Operations and Segmentation used in digital image processing
Module – 1 Contact
Hours
Digital Image Fundamentals: What is Digital Image Processing?,Originsof Digital 08
Image Processing, Examples of fields that use DIP, FundamentalSteps in Digital Image
Processing, Components of an Image ProcessingSystem, Elements of Visual Perception,
Image Sensing and Acquisition,Image Sampling and Quantization, Some Basic
Relationships betweenPixels, Linear and Nonlinear Operations.
[Text1: Chapter 1 and Chapter 2: Sections 2.1 to 2.5, 2.6.2]
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1,L2
Module – 2

Spatial Domain: Some Basic Intensity Transformation Functions,Histogram 08

Processing, Fundamentals of Spatial Filtering,-SmoothingSpatial Filters, Sharpening
SpatialFiltersFrequency Domain: Preliminary Concepts, The Discrete
FourierTransform (DFT) of Two Variables, Properties of the 2-D DFT, Filtering inthe
Frequency Domain, Image Smoothing and Image Sharpening UsingFrequency Domain
Filters, and Selective Filtering.
[Text1: Chapter 3: Sections 3.2 to 3.6 and Chapter 4: Sections 4.2, 4.5 to4.10]

RBT: L1,L2, L3
Module – 3

Restoration: Noise models, Restoration in the Presence of Noise Onlyusing Spatial 08

Filtering and Frequency Domain Filtering, Linear, Position-Invariant Degradations,
Estimating the Degradation Function, InverseFiltering, Minimum Mean Square Error
(Wiener) Filtering, and ConstrainedLeast Squares Filtering.
[Text1: Chapter 5: Sections 5.2, to 5.9]

RBT: L1,L2, L3
Module – 4

Color Image Processing: Color Fundamentals, Color Models, and Pseudo-colorImage 08

Processing.
Wavelets: Background, Multiresolution Expansions.
Morphological Image Processing: Preliminaries, Erosion and Dilation,Opening and
Closing, The Hit-or-Miss Transforms, and Some BasicMorphological Algorithms.
[Text1: Chapter 6: Sections 6.1 to 6.3, Chapter 7: Sections 7.1 and 7.2,Chapter 9:
Sections 9.1 to 9.5]

RBT: L1,L2, L3
Module – 5

Segmentation: Introduction, classification of image segmentation algorithms, Detection 08

of Discontinuities, Edge Detection, Hough Transforms and Shape Detection, Corner
Detection, and Principles of Thresholding.
Representation and Description: Representation, and Boundary descriptors.
[Text2: Chapter 9: Sections 9.1, to 9.7 and Text 1: Chapter 11: Sections 11.1and
11.2]

RBT: L1,L2, L3
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Course outcomes: The students should be able to:

 Understand, Ascertain and describe the basics of image processing concepts through
mathematical interpretation.
 Apply image processing techniques in both the spatial and frequency (Fourier)domains.
 Demonstrate image restoration process and its respective filters required.
 Design image analysis techniques in the form of image segmentation and toevaluate the
Methodologies for segmentation.
 Conduct independent study and analysis of Image Enhancement techniques.
Question Paper Pattern:

 The question paper will have ten questions.

 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:

1. Rafael C. Gonzalez and Richard E. Woods, Digital Image Processing, Third Ed., Prentice
Hall, 2008.
2. S. Sridhar, Digital Image Processing, Oxford University Press, 2ndEdition, 2016.
Reference Books:

1. Digital Image Processing- S.Jayaraman, S.Esakkirajan, T.Veerakumar, TataMcGraw Hill

2014.
2. Fundamentals of Digital Image Processing-A. K. Jain, Pearson 2004.

SEMANTIC WEB AND SOCIAL NETWORKS

(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI743 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 To understand the components of the social network.
 To model and visualize the social network.
 To mine the users in the social network.
 To understand the evolution of the social network.
 To know the applications in real time systems.
Module – 1 Contact
Hours
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Web Intelligence: Thinking and Intelligent Web Applications, The Information Age 08
,The World Wide. Web, Limitations of Today‟s Web, The Next Generation Web,
Machine Intelligence, Artificial Intelligence, Ontology, Inference engines, Software
Agents, Berners-Lee www, Semantic Road Map,Logic on the semantic Web.
T1: Chapter 1,3,4
RBT: L1, L2
Module – 2
Knowledge Representation for the Semantic Web: Ontologies and their role in the 08
semantic web, Ontologies Languages for the Semantic Web –Resource Description
Framework(RDF) / RDF Schema, Ontology Web Language(OWL), UML,
XML/XML Schema.
T1: Chapter 2,5
RBT: L1, L2
Module – 3
Ontology Engineering: Ontology Engineering, Constructing Ontology, Ontology 08
Development Tools,Ontology Methods, Ontology Sharing and Merging, Ontology
Libraries and Ontology Mapping, Logic,Rule and Inference Engines.
T1: Chapter 7,8
RBT: L1, L2
Module – 4
Semantic Web Applications, Services and Technology: Semantic Web applications 08
and services,Semantic Search, e-learning, Semantic Bioinformatics, Knowledge
Base ,XML Based Web Services,Creating an OWL-S Ontology for Web Services,
Semantic Search Technology, Web Search Agents and Semantic Methods
T1: Chapter 10,11,12
RBT: L1, L2
Module – 5
Social Network Analysis and semantic web. What is social Networks analysis, 08
development of the social networks analysis, Electronic Sources forNetwork
Analysis – Electronic Discussion networks, Blogs and Online Communities, Web
Based Networks. Building Semantic Web Applications with social network features.
T2: Chapter 2,3
RBT: L1, L2
Course outcomes: The students should be able to:
 Work on the internal components of the social network.
 Model and visualize the social network.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Analyse the behaviour of the users in the social network.

 Predict the possible next outcome of the social network.
 Apply social network in real time applications.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Thinking on the Web – Berners Lee, Godel and Turing, Wiley inter science, 2008.
2. Social Networks and the Semantic Web, Peter Mika, Springer, 2007.
Reference Books:
1. Semantic Web Technologies, Trends and Research in Ontology Based Systems, J.
Davies, R. Studer, P. Warren, John Wiley & Sons.
2. Semantic Web and Semantic Web Services -Liyang Lu Chapman and Hall/CRC
Publishers,(Taylor & Francis Group)
3. Information Sharing on the semantic Web – Heiner Stuckenschmidt; Frank Van
Harmelen,Springer Publications.
4. Programming the Semantic Web, T. Segaran, C.Evans, J. Taylor, O‟Reilly, SPD.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

BUSINESS INTELLIGENCE
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI744 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 Explain the Decision Support systems and Business Intelligence framework.
 Illustrate the significance of computerized Decision Support, and understand the
mathematicalmodelling behind decision support.
 Explain Data warehousing, its architecture and Extraction, Transformation, and Load (ETL)
Processes.Explore knowledge management, explain its activities, approaches and its
implementation.
 Describe the Expert systems , areas suitable for application of experts system
Module – 1 Contact
Hours
Decision Support and Business Intelligence: Opening Vignette, Changing Business 08
Environments andComputerized Decision Support, Managerial Decision Making,
Computerized Support for Decision Making, AnEarly Framework for Computerized
Decision Support, The Concept of Decision Support Systems (DSS), Aframework for
Business Intelligence (BI), A Work System View of Decision Support.
Text Book 1: Chapter 1
RBT: L1, L2
Module – 2
Computerised Decision Support: Decision Making, Models, Phases of the Decision- 08
Making Process, TheIntelligence Phase, The Design Phase, The Choice Phase, The
Implementation Phase, How Decisions AreSupported.Modelling and Analysis:Structure of
Mathematical Models for Decision Support, Certainty, Uncertainty, andRisk, Management
Support Systems, Multiple Goals, Sensitivity Analysis, What-If Analysis, andGoal Seeking

Text Book 1: Chapter 2

RBT: L1, L2
Module – 3
Data Warehousing: Data Warehousing Definitions and Concepts, Data Warehousing 08
Process Overview, DataWarehousing Architectures, Data Integration and the Extraction,
Transformation, and Load (ETL) Processes.

Text Book 1: Chapter 5

RBT: L1, L2
Module – 4
Knowledge Management: Introduction to Knowledge Management, Organizational 08
Learning andTransformation, Knowledge Management Activities, Approaches to
Knowledge Management, InformationTechnology (IT) In Knowledge Management,
Knowledge Management Systems Implementation.

Text Book 1: Chapter 11

RBT: L1, L2
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Module – 5
Expert Systems: Basic Concepts of Expert Systems, Applications of Expert Systems, 08
Structure of ExpertSystems, Knowledge Engineering, Problem Areas Suitable for Expert
Systems, Development of Expert Systems,Benefits, Limitations, and Critical Success
Factors of Expert Systems.

Text Book 1: Chapter 12

RBT: L1, L2
Course outcomes: The students should be able to:
 Apply the basics of data and business to understand Decision Support systems and
Business Intelligence framework.
 Describe the significance of 99omputerized Decision Support, apply the basics of
mathematics to understand the mathematical modelling behind decision support.
 Explain Data warehousing , its architecture and Extraction, Transformation, and Load
(ETL) Processes.
 Analyze the importance of knowledge management and explain its activities, approaches and its
implementation.
 Describe the Expert systems and analyze its development , discuss areas suitable forapplication of
experts system.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Business Intelligence, A managerial Perspective on Analytics.Sharda, R,
DelenD,TurbanE.Pearson. 2014
Reference Books:
1. Data Mining Techniques. For Marketing, Sales and Customer Relationship Management Berry
M.&Linoff G. Wiley Publishing Inc 2004
2. Data Science for Business, Foster Provost and Tom Fawcett, O‟Reilly Media,Inc2013

INTRODUCTION TO BIG DATA ANALYTICS

(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18CS751 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Interpret the data in the context of the business.
 Identify an appropriate method to analyze the data
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Show analytical model of a system

Module – 1 Contact
Hours
Introduction to Data Analytics and Decision Making: Introduction, Overview of the 08
Book, The Methods, The Software, Modeling and Models, Graphical Models, Algebraic
Models, Spreadsheet Models, Seven-Step ModelingProcess.Describing the Distribution of
a Single Variable:Introduction,Basic Concepts, Populations and Samples, Data
Sets,Variables,and Observations, Types of Data, Descriptive Measures for Categorical
Variables, Descriptive Measures for Numerical Variables, Numerical Summary Measures,
Numerical Summary Measures with StatTools,Charts for Numerical Variables, Time Series
Data, Outliers and Missing Values,Outliers,Missing Values, Excel Tables for
Filtering,Sorting,and Summarizing.
Finding Relationships among Variables: Introduction, Relationships among Categorical
Variables, Relationships among Categorical Variables and a Numerical Variable, Stacked
and Unstacked Formats, Relationships among Numerical Variables, Scatterplots,
Correlation and Covariance, Pivot Tables.
Textbook 1: Ch. 1,2,3
RBT: L1, L2, L3
Module – 2
Probability and Probability Distributions:Introduction,Probability Essentials, Rule of 08
Complements, Addition Rule, Conditional Probability and the Multiplication Rule,
Probabilistic Independence, Equally Likely Events, Subjective Versus Objective
Probabilities, Probability Distribution of a Single Random Variable, Summary Measures of
a Probability Distribution, Conditional Mean and Variance, Introduction to Simulation.
Normal,Binormal,Poisson,and Exponential Distributions:Introduction,The Normal
Distribution, Continuous Distributions and Density Functions, The Normal
Density,Standardizing:Z-Values,Normal Tables and Z-Values, Normal Calculations in
Excel, Empirical Rules Revisited, Weighted Sums of Normal Random Variables,
Applications of the Normal Random Distribution, The Binomial Distribution, Mean and
Standard Deviation of the Binomial Distribution, The Binomial Distribution in the Context
of Sampling, The Normal Approximation to the Binomial, Applications of the Binomial
Distribution, The Poisson and Exponential Distributions, The Poisson Distribution, The
Exponential Distribution.
Textbook 1: Ch. 4,5
RBT: L1, L2, L3

Module – 3
Decision Making under Uncertainty:Introduction,Elements of Decision Analysis, Payoff 08
Tables, Possible Decision Criteria, Expected Monetary Value(EMY),Sensitivity Analysis,
Decision Trees, Risk Profiles, The Precision Tree Add-In,Bayes‟ Rule, Multistage Decision
Problems and the Value of Information, The Value of Information, Risk Aversion and
Expected Utility, Utility Functions, Exponential Utility, Certainty Equivalents, Is Expected
Utility Maximization Used?
Sampling and Sampling Distributions: Introduction, Sampling Terminology, Methods for
Selecting Random Samples, Simple Random Sampling, Systematic Sampling, Stratified
Sampling, Cluster Sampling, Multistage Sampling Schemes, Introduction to Estimation,
Sources of Estimation Error, Key Terms in Sampling, Sampling Distribution of the Sample
Mean, The Central Limit Theorem, Sample Size Selection, Summary of Key Ideas for
Simple Random Sampling.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Textbook 1: Ch. 6,7

RBT: L1, L2, L3
Module – 4
Confidence Interval Estimation: Introduction, Sampling Distributions, The t Distribution, 08
Other Sampling Distributions, Confidence Interval for a Mean, Confidence Interval for a
Total, Confidence Interval for a Proportion, Confidence Interval for a Standard Deviation,
Confidence Interval for the Difference between Means, Independent Samples, Paired
Samples, Confidence Interval for the Difference between Proportions, Sample Size
Selection, Sample Size Selection for Estimation of the Mean, Sample Size Selection for
Estimation of Other Parameters.
Hypothesis Testing:Introduction,Concepts in Hypothesis Testing, Null and Alternative
Hypothesis, One-Tailed Versus Two-Tailed Tests, Types of Errors, Significance Level and
Rejection Region, Significance from p-values, Type II Errors and Power, Hypothesis Tests
and Confidence Intervals, Practical versus Statistical Significance, Hypothesis Tests for a
Population Mean, Hypothesis Tests for Other Parameters, Hypothesis Tests for a Population
Proportion, Hypothesis Tests for Differences between Population Means, Hypothesis Test
for Equal Population Variances, Hypothesis Tests for Difference between Population
Proportions, Tests for Normality, Chi-Square Test for Independence.
Textbook 1: Ch. 8,9
RBT: L1, L2, L3
Module – 5
Regression Analysis: Estimating Relationships: Introduction, Scatterplots : Graphing 08
Relationships, Linear versus Nonlinear Relationships,Outliers,Unequal Variance, No
Relationship,Correlations:Indications of Linear Relationships, Simple Linear Regression,
Least Squares Estimation, Standard Error of Estimate, The Percentage of Variation
Explained:R-Square,Multiple Regression, Interpretation of Regression Coefficients,
Interpretation of Standard Error of Estimate and R-Square, Modeling Possibilities, Dummy
Variables, Interaction Variables, Nonlinear Transformations, Validation of the Fit.
Regression Analysis: Statistical Inference:Introduction,The Statistical Model, Inferences
About the Regression Coefficients, Sampling Distribution of the Regression Coefficients,
Hypothesis Tests for the Regression Coefficients and p-Values, A Test for the Overall Fit:
The ANOVA Table,Multicollinearity,Include/Exclude Decisions, Stepwise
Regression,Outliers,Violations of Regression Assumptions,Nonconstant Error
Variance,Nonnormality of Residuals,Autocorrelated Residuals ,Prediction.
Textbook 1: Ch. 10,11
RBT: L1, L2, L3

Course outcomes: The students should be able to:

 Explain the importance of data and data analysis
 Interpret the probabilistic models for data
 Define hypothesis, uncertainty principle
 Evaluate regression analysis
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021


Text Books:
1. S C Albright and W L Winston, Business analytics: data analysis and decision making,
5/e Cenage Learning
Reference Books:
1. ArshdeepBahga, Vijay Madisetti, “Big Data Analytics: A Hands-On Approach”, 1st Edition, VPT
Publications, 2018. ISBN-13: 978-0996025577
2. Raj Kamal and Preeti Saxena, “Big Data Analytics Introduction to Hadoop, Spark, and Machine-
Learning”, McGraw Hill Education, 2018 ISBN: 9789353164966, 9353164966
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021
PYTHON APPLICATION PROGRAMMING
(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18CS752 IA Marks 40
Number of Lecture Hours/Week 3:0:0 Exam Marks 60
Total Number of Lecture Hours 40 Exam Hours 03
CREDITS – 03
Course Objectives:This course will enable students to

 Learn Syntax and Semantics and create Functions in Python.

 Handle Strings and Files in Python.
 Understand Lists, Dictionaries and Regular expressions in Python.
 Implement Object Oriented Programming concepts in Python
 Build Web Services and introduction to Network and Database Programmingin Python.
Module – 1 Contact
Hours
Why should you learn to write programs, Variables, expressions and statements, 08
Conditional execution, Functions
Textbook 1: Chapters 1 – 4
RBT: L1, L2, L3
Module – 2
Iteration, Strings, Files 08
Textbook 1: Chapters 5– 7
RBT: L1, L2, L3
Module – 3
Lists, Dictionaries, Tuples, Regular Expressions 08
Textbook 1: Chapters 8 – 11
RBT: L1, L2, L3
Module – 4
Classes and objects, Classes and functions, Classes and methods 08
Textbook 2: Chapters 15 – 17
RBT: L1, L2, L3
Module – 5
Networked programs, Using Web Services, Using databases and SQL 08
Textbook 1: Chapters 12– 13, 15
RBT: L1, L2, L3
Course Outcomes:After studying this course, students will be able to
 Examine Python syntax and semantics and be fluent in the use of Python flow control and
functions.
 Demonstrate proficiency in handling Strings and File Systems.
 Create, run and manipulate Python Programs using core data structures like Lists, Dictionaries
and use Regular Expressions.
 Interpret the concepts of Object-Oriented Programming as used in Python.
 Implement exemplary applications related to Network Programming, Web Services and
Databases in Python.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Question paper pattern:

 The question paper will have ten questions.

 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Text Books:
1. Charles R. Severance, “Python for Everybody: Exploring Data Using Python 3”, 1st Edition,
CreateSpace Independent Publishing Platform, 2016. (http://do1.dr-
chuck.com/pythonlearn/EN_us/pythonlearn.pdf )
2. Allen B. Downey, “Think Python: How to Think Like a Computer Scientist”, 2ndEdition,
Green Tea Press, 2015. (http://greenteapress.com/thinkpython2/thinkpython2.pdf) (Download
pdf files from the above links)
Reference Books:
1. Charles Dierbach, “Introduction to Computer Science Using Python”,1st Edition, Wiley India
Pvt Ltd, 2015. ISBN-13: 978-8126556014
2. Gowrishankar S, Veena A, “Introduction to Python Programming”, 1st Edition, CRC
Press/Taylor & Francis, 2018. ISBN-13: 978-0815394372
3. Mark Lutz, “Programming Python”,4th Edition, O‟Reilly Media, 2011.ISBN-13: 978-
9350232873
4. Roberto Tamassia, Michael H Goldwasser, Michael T Goodrich, “Data Structures and
Algorithms in Python”,1stEdition, Wiley India Pvt Ltd, 2016. ISBN-13: 978-8126562176
5. ReemaThareja, “Python Programming Using Problem Solving Approach”, Oxford university
press, 2017. ISBN-13: 978-0199480173

INTRODUCTION TO ARTIFICIAL INTELLIGENCE

(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18CS753 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives:This course will enable students to:
 Identify the problems where AI is required and the different methods available
 Compare and contrast different AI techniques available.
 Define and explain learning algorithms
Module – 1 Contact
Hours
What is artificial intelligence?, Problems, Problem Spaces and search 08
TextBook1: Ch 1, 2
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1, L2
Module – 2
Knowledge Representation Issues, Using Predicate Logic, Representing knowledge using 08
Rules,
TextBoook1: Ch 4, 5 and 6.
RBT: L1, L2
Module – 3
Symbolic Reasoning under Uncertainty, Statistical reasoning 08
TextBoook1: Ch 7, 8
RBT: L1, L2
Module – 4
Game Playing, Natural Language Processing 08
TextBoook1: Ch 12 and 15
RBT: L1, L2
Module – 5
Learning, Expert Systems. 08
TextBook1: Ch 17 and 20
RBT: L1, L2
Course outcomes: The students should be able to:
 Identify the AI based problems
 Apply techniques to solve the AI problems
 Define learning and explain various learning techniques
 Discuss on expert systems
Question paper pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Text Books:
1. E. Rich , K. Knight & S. B. Nair – Artificial Intelligence, 3/e, McGraw Hill.
Reference Books:
1. Artificial Intelligence: A Modern Approach, Stuart Rusell, Peter Norving, Pearson Education 2 nd
Edition.
2. Dan W. Patterson, Introduction to Artificial Intelligence and Expert Systems – Prentice Hal of
India.
3. G. Luger, “Artificial Intelligence: Structures and Strategies for complex problem Solving”,
Fourth Edition, Pearson Education, 2002.
4. Artificial Intelligence and Expert Systems Development by D W Rolston-Mc Graw hill.
5. N.P. Padhy “Artificial Intelligence and Intelligent Systems” , Oxford University Press-2015
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

INTRODUCTION TO DOT NET FRAMEWORK FOR APPLICATION

DEVELOPMENT
(OPEN ELECTIVE)
(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18CS754 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Inspect Visual Studio programming environment and toolset designed to build applications for
Microsoft Windows
 Understand Object Oriented Programming concepts in C# programming language.
 Interpret Interfaces and define custom interfaces for application.
 Build custom collections and generics in C#
 Construct events and query data using query expressions
Module – 1 Contact
Hours
Introducing Microsoft Visual C# and Microsoft Visual Studio 2015: Welcome to C#, 08
Working with variables, operators and expressions, Writing methods and applying scope,
Using decision statements, Using compound assignment and iteration statements, Managing
errors and exceptions
T1: Chapter 1 – Chapter 6
RBT: L1, L2
Module – 2
Understanding the C# object model: Creating and Managing classes and objects, 08
Understanding values and references, Creating value types with enumerations and
structures, Using arrays
Textbook 1: Ch 7 to 10
RBT: L1, L2
Module – 3
Understanding parameter arrays, Working with inheritance, Creating interfaces and defining 08
abstract classes, Using garbage collection and resource management
Textbook 1: Ch 11 to 14
RBT: L1, L2
Module – 4
Defining Extensible Types with C#: Implementing properties to access fields, Using 08
indexers, Introducing generics, Using collections
Textbook 1: Ch 15 to 18
RBT: L1, L2
Module – 5
Enumerating Collections, Decoupling application logic and handling events, Querying in- 08
memory data by using query expressions, Operator overloading
Textbook 1: Ch 19 to 22
RBT: L1, L2
Course outcomes: The students should be able to:
 Build applications on Visual Studio .NET platform by understanding the syntax and semantics of
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

C#
 Demonstrate Object Oriented Programming concepts in C# programming language
 Design custom interfaces for applications and leverage the available built-in interfaces in building
complex applications.
 Illustrate the use of generics and collections in C#
 Compose queries to query in-memory data and define own operator behaviour
Question paper pattern:
The question paper will have TEN questions.
There will be TWO questions from each module.
Each question will have questions covering all the topics under a module.
The students will have to answer FIVE full questions, selecting ONE full question from each module.
Text Books:
1. John Sharp, Microsoft Visual C# Step by Step, 8th Edition, PHI Learning Pvt. Ltd. 2016
Reference Books:
1. Christian Nagel, “C# 6 and .NET Core 1.0”, 1st Edition, Wiley India Pvt Ltd, 2016. Andrew
Stellman and Jennifer Greene, “Head First C#”, 3rd Edition, O‟Reilly Publications, 2013.
2. Mark Michaelis, “Essential C# 6.0”, 5th Edition, Pearson Education India, 2016.
3. Andrew Troelsen, “Prof C# 5.0 and the .NET 4.5 Framework”, 6th Edition, Apress and Dreamtech
Press, 2012.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

VISUALIZATION & DS MINI PROJECT LABORATORY

(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18ADL76 CIE Marks 40

Number of Contact Hours/Week 0:2:2 SEE Marks 60

Total Number of Lab Contact Hours Exam Hours 3 Hrs

Credits – 2
Course Learning Objectives: This course will enable students to:

 Make use of Data sets in implementing the data visualization techniques

 Implement the data visualization techniques
 Integrate machine learning libraries and mathematical and statistical tools that are suitable for the Data
Science applications under consideration.
Descriptions (if any):
PART A:

 Write the programs using Python/R/equivalent Programming Language.

 Execute the programs in either Visual Studio Code or PyCharm Community/equivalent Edition.
 Use appropriate libraries as needed to execute the programs.
 Data sets can be downloaded from standard repositories -
(https://archive.ics.uci.edu/ml/datasets.html) or constructed by the students
PART B

 Data Science applications is to be developed with suitable Graphical User Interface.

Installation procedure of the required software must be demonstrated, carried out in groups and
documented in the journal.
--------------------------------------------------------------------------------------------------------------------------------
PART A:

1. Load the specified dataset

a) Using numpy and compute mean, median, variance and Standard deviation and illustrate
Indexing, Slicing, Splitting, Iterating, Filtering, Sorting, Combining, and Reshaping
b) Using pandas and compute mean, median, variance and Standard deviation and
illustrate Indexing, Slicing, Iterating, Filtering, Sorting and Reshaping
2. For a given set of training data examples stored in a .CSV file, implement and demonstrate the
(Note: Import Matplotlib)
a) Visualizing through a Line Plot
b) Creating a Bar Plot
c) Creating a Stacked Bar Plot to Visualize a specified parameter
d) Comparing specific parameters using Stacked Area Chart
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

3. For a given set of training data examples stored in a .CSV file, implement and demonstrate
the (Note: Import Matplotlib)

4. a) Histogram and a Box Plot to Visualize the given parameter

b) Scatter Plot to Visualize Correlation
c) Scatter Plot with Marginal Histograms
d) Plotting Multiple Images in a Grid
5. Implement the non-parametric Locally Weighted Regression algorithm in order to fit data points.
Select appropriate data set for your experiment and draw graphs

6. Write a program to parse HTML using Beutifulsoup/equivalent Library support

PART B

Mini Project
 Use Java, C#, PHP, Python, or any other similar front-end tool. Developed mini projectns
must be demonstrated on desktop/laptop as a stand-alone or web based application
 Installation procedure of the required software must be demonstrated, carried out in groups
and documented in the journal.
 Indicative areas include: health care, education, agriculture, banking, library, agent based
systems, registration systems, industry, reservation systems, facility management, super
market etc.,Similar to but not limited to:
Handwritten Digit Recognition
Prediction of Cardiac Arrhythmia type using Clustering and Regression Approach Hybrid
Regression Technique for House Prices Prediction
An Iris Recognition Algorithm for Identity Authentication
An Approach to Maintain Attendance using Image Processing Techniques
Unconstrained Face Recognition
Vehicle Number Plate Detection System
Detection of Fake News
Stock Prediction using Linear Regression
Prediction of Weather Report
Analyzing Bike Sharing Trends
Sentiment Analysis for Movie Reviews
Analyzing and Recommendations of Music Trends
Forecasting Stock and Commodity Prices
Diabetes Prediction
Speech Recognition
Spam Detection using neural Networks in Python
Combining satellite imagery and to predict poverty

Conduct of Practical Examination:

 Experiment distribution
o For laboratories having only one part: Students are allowed to pick one experiment from the
lot with equal opportunity.
o For laboratories having PART A and PART B: Students are allowed to pick one experiment
from PART A and one experiment from PART B, with equal opportunity.
 Change of experiment is allowed only once and marks allotted for procedure to be made zero of the
changed part only.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Marks Distribution (Subjected to change in accordance with university regulations)

s) For laboratories having only one part – Procedure + Execution + Viva-Voce: 15+70+15 = 100
Marks
t) For laboratories having PART A and PART B
i. Part A – Procedure + Execution + Viva = 6 + 28 + 6 = 40 Marks
ii. Part B – Procedure + Execution + Viva = 9 + 42 + 9 = 60 Marks

DATA SECURITY AND PRIVACY

(Effective from the academic year 2018 -2019)
SEMESTER – VIII
Subject Code 18AD81 40
CIE Marks

Number of Contact Hours/Week 3:0:0 SEE Marks 60

Total Number of Contact Hours 40 Exam Hours 3 Hrs

CREDITS – 03
Course Learning Objectives: This course will enable students to:

 Explain standard algorithms used to provide confidentiality, integrity and authenticity for
data.
 Distinguish key distribution and management schemes.
 Deploy encryption techniques to secure data in transit across data networks
 Implement security applications in the field of Information technology
 Illustrate data privacy
Module – 1 Contact
Hours
Classical Encryption Techniques Symmetric Cipher Model, Cryptography, 08
Cryptanalysis and Brute-Force Attack, Substitution Techniques, Caesar Cipher, Mono-
alphabetic Cipher, Playfair Cipher, Hill Cipher, Poly alphabetic Cipher, One Time Pad.
Block Ciphers and thedata encryption standard: Traditional block Cipher structure,
stream Ciphers and block Ciphers, Motivation for the feistel Cipher structure, the feistel
Cipher, The data encryption standard, DES encryption, DES decryption, A DES
example, results, the avalanche effect, the strength of DES, the use of 56-Bit Keys, the
nature of the DES algorithm, timing attacks, Block cipher design principles, number of
rounds, design of function F, key schedule algorithm.
Text Book1: Chapter 3, Chapter 4
RBT: L1,L2
Module-2

Public-Key Cryptography and RSA: Principles of public-key cryptosystems. Public- 08

 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

key cryptosystems. Applications for public-key cryptosystems, requirements for public-

key cryptosystems. Public-key cryptanalysis. The RSA algorithm, description of the
algorithm, computational aspects, the security of RSA. Other Public-Key
Cryptosystems: Diffiehellman key exchange, The algorithm, key exchange protocols,
man in the middle attack, Elgamal Cryptographic systems, Elliptic curve arithmetic,
abelian groups, elliptic curves over real numbers, elliptic curves over Zp, elliptic curves
overGF(2m), Elliptic curve cryptography, Analog of Diffie-hellman key exchange,
Elliptic curve encryption/ decryption, security of Elliptic curve cryptography,
Pseudorandom number generation based on a asymmetric cipher

Text book 1: Chapter 9, Chapter 10

RBT: L1,L2, L3
Module-3

Key Management and Distribution: Symmetric key distribution using Symmetric 08

encryption, A key distribution scenario, Hierarchical key control, session key lifetime, a
transparent key control scheme, Decentralized key control, controlling key usage,
Symmetric key distribution using asymmetric encryption, simple secret key distribution,
secret key distribution with confidentiality and authentication, A hybrid scheme,
distribution of public keys, public announcement of public keys, publicly available
directory, public key authority, public keys certificates, X-509 certificates. Certificates,
X-509 version 3, Public Key infrastructure
Text Book 1: Chapter 14
RBT: L1,L2, L3
Module-4

An Introduction to privacy preserving data mining: Privacy-Preserving Data Mining 08

Algorithms, The Randomization Method, Group Based Anonymization.
Text Book 2: Chapter 1 -1.1, 1.2 , Chapter 2 - 2.2, 2.3
RBT: L1,L2, L3
Module-5

Distributed Privacy-Preserving Data Mining, Privacy-Preservation of Application 08

Results, Limitations of Privacy: The Curse of Dimensionality, Applications of Privacy-
Preserving Data Mining
Text Book 2: Chapter 2 - 2.4, 2.5,2.6,2.7
RBT: L1,L2, L3
Course outcomes: The students should be able to:

 Analyze the vulnerabilities in any computing system and hence be able to design a security
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

solution.
 Identify the security issues in the network and resolve it.
 Evaluate security mechanisms using rigorous approaches, including theoretical.
 Describe importance of data privacy, limitations and applications
Question Paper Pattern:

 The question paper will have ten questions.

 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:

1. Cryptography and Network Security, William Stallings., Pearson 7th edition.

2. Privacy Preserving Data Mining: Models and Algorithms, Charu C. Aggarwal, Philip S Yu,
Kluwer Academic Publishers, 2008, ISBN 978-0-387-70991-8, DOI 10.1007/978- 0-387-
70992-5
Reference Books:
1. Cryptography and Network Security, AtulKahate, McGraw Hill Education, 4th Edition
2. Cryptography and Information Security, V K Pachghare, 2nd edition, PHI
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

SYSTEM MODELLING AND SIMULATION

(Effective from the academic year 2018 -2019)
SEMESTER – VIII
Subject Code 18AI821 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 Explain the basic system concept and definitions of system;
 Discuss techniques to model and to simulate various systems;
 Analyze a system and to make use of the information to improve the performance.
Module 1 Contact
Hours
Introduction: When simulation is the appropriate tool and when it is not appropriate, 08
Advantages and disadvantages of Simulation; Areas of application, Systems and system
environment; Components of a system; Discrete and continuous systems, Model of a system;
Types of Models, Discrete-Event System Simulation Simulation examples: Simulation of queuing
systems. General Principles.
Textbook 1: Ch. 1, 2, 3.1.1, 3.1.3
RBT: L1, L2, L3
Module 2
Statistical Models in Simulation :Review of terminology and concepts, Useful statistical 08
models,Discrete distributions. Continuous distributions,Poisson process, Empirical distributions.
Queuing Models:Characteristics of queuing systems,Queuingnotation,Long-run measures of
performance of queuing systems,Long-run measures of performance of queuing systems
cont…,Steady-state behavior of M/G/1 queue, Networks of queues,
Textbook 1: Ch. 5,6.1 to 6.3, 6.4.1,6.6
RBT: L1, L2, L3
Module 3
Random-NumberGeneration:Properties of random numbers; Generation of pseudo-random 08
numbers, Techniques for generating random numbers,Tests for Random Numbers, Random-
Variate Generation: ,Inverse transform technique Acceptance-Rejection technique.
Textbook 1: Ch. 7,8.1, 8.2
RBT: L1, L2, L3
Module 4
Input Modeling: Data Collection; Identifying the distribution with data, Parameter estimation, 08
Goodness of Fit Tests, Fitting a non-stationary Poisson process, Selecting input models without
data, Multivariate and Time-Series input models.
Estimation of Absolute Performance: Types of simulations with respect to output analysis
,Stochastic nature of output data, Measures of performance and their estimation,
Textbook 1: Ch. 9, 11.1 to 11.3
RBT: L1, L2, L3
Module 5
Measures of performance and their estimation,Output analysis for terminating simulations 08
Continued..,Output analysis for steady-state simulations.
Verification, Calibration And Validation: Optimization: Model building, verification and
validation, Verification of simulation models, Verification of simulation models,Calibration and
validation of models, Optimization via Simulation.
Textbook 1: Ch. 11.4, 11.5, 10
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

RBT: L1, L2, L3

Course Outcomes: The student will be able to :
 Explain the system concept and apply functional modelling method to model the activities of a static
system
 Describe the behavior of a dynamic system and create an analogous model for a dynamic system;
 Simulate the operation of a dynamic system and make improvement according to the simulation
results.
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Jerry Banks, John S. Carson II, Barry L. Nelson, David M. Nicol: Discrete-Event System Simulation,
5 th Edition, Pearson Education, 2010.
Reference Books:
1. Lawrence M.Leemis, Stephen K. Park: Discrete – Event Simulation: A First Course,
Pearson Education, 2006.
2. Averill M. Law: Simulation Modelling and Analysis, 4 th Edition, Tata McGraw-Hill, 2007
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

SOFT AND EVOLUTIONARY COMPUTING

(Effective from the academic year 2018 -2019)
SEMESTER – VIII

Subject Code 18AI822 CIE Marks 40

Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS – 03
Course Learning Objectives: This course will enable students to:
 Describe the basics of Soft computing
 Explain the process Fuzzy &Genetic Algorithm to solve the optimization problem.
 Analyse the Neuro Fuzzy system for clustering and classification.
 Illustrate the process of swarm intelligence system to solve real world problems.
Module – 1 Contact
Hours
Introduction to Soft computing: Neural networks, Fuzzy logic, Genetic algorithms, Hybrid 08
systems and its applications.
Introduction to classical sets and fuzzy sets: Classical relations and fuzzy relations,
Membership functions.
T1: chapter 1 and 7 & 8
Module – 2
Fuzzification and Defuzzification 08
T1: Chapter 9 & 10

Module – 3
Genetic algorithms: Introduction, Basic operations, Traditional algorithms, Simple GA 08
General genetic algorithms, Operators, Stopping conditions for GA flow.
T1: Chapter 15.1 To 15.10
RBT: L1, L2
Module – 4
Swarm Intelligence System: Introduction, background of SI, Ant colony system 08
Working of ant colony optimization, ant colony for TSP.
T2: 8.1 to 8.5
RBT: L1, L2
Module – 5
Unit commitment problem, particle Swarm Intelligence system 08
Artificial bee colony system, Cuckoo search system.
T2: 8.6 to 8.9
RBT: L1, L2
Course outcomes: The students should be able to:
 Implement machine learning through neural networks.
 Design Genetic Algorithm to solve the optimization problem.
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

 Develop a Fuzzy expert system.

 Model Neuro Fuzzy system for clustering and classification
Question Paper Pattern:
 The question paper will have ten questions.
 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:
1. Principles of Soft computing, Shivanandam, Deepa S. N, Wiley India, 2011/Reprint2014
2. Soft Computing with MATLAB Programming, N. P. Padhy, S.P. Simon, Oxford, 2015.
Reference Books:
1. Neuro-fuzzy and soft computing, .S.R. Jang, C.T. Sun, E. Mizutani, Phi (EEE edition), 2012
2. Soft Computing, SarojKaushik, SunitaTiwari, McGrawHill, 2018
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

ROBOTIC PROCESS AUTOMATION DESIGN & DEVELOPMENT

(Effective from the academic year 2018 -2019)
SEMESTER – VII
Subject Code 18AI823 CIE Marks 40
Number of Contact Hours/Week 3:0:0 SEE Marks 60
Total Number of Contact Hours 40 Exam Hours 3 Hrs
CREDITS –3
Course Learning Objectives: This course will enable students to:
 To understand Basic Programming concepts and the underlying logic/structure
 To Describe RPA , where it can be applied and how its implemented
 To Describe the different types of variables, Control Flow and data manipulation techniques
 To Understand Image, Text and Data Tables Automation
 To Describe automation to Email and various types of Exceptions and strategies to handle
Module – 1 Contact
Hours
Programming Concepts Basics - Understanding the application - Basic Web Concepts - 08
Protocols - Email Clients -. Data Structures - Data Tables - Algorithms - Software Processes -
Software Design - Scripting - .Net Framework - .Net Fundamentals - XML - Control structures
and functions - XML - HTML - CSS - Variables & Arguments.
RBT: L1, L2, L3
Module – 2
RPA Basics - History of Automation - What is RPA - RPA vs Automation - Processes & 08
Flowcharts - Programming Constructs in RPA - What Processes can be Automated - Types of
Bots - Workloads which can be automated - RPA Advanced Concepts - Standardization of
processes - RPA Developemt methodologies - Difference from SDLC - Robotic control flow
architecture - RPA business case - RPA Team - Proccess Design Document/Solution Design
Document - Industries best suited for RPA - Risks & Challenges with RPA - RPA and emerging
ecosystem.
RBT: L1, L2, L3
Module – 3
Introduction to RPA Tool - The User Interface - Variables - Managing Variables - Naming Best 08
Practices - The Variables Panel - Generic Value Variables - Text Variables - True or False
Variables - Number Variables - Array Variables - Date and Time Variables - Data Table
Variables - Managing Arguments - Naming Best Practices - The Arguments Panel - Using
Arguments - About Imported Namespaces - Importing New Namespaces- Control Flow -
Control Flow Introduction - If Else Statements - Loops - Advanced Control Flow - Sequences -
Flowcharts - About Control Flow - Control Flow Activities - The Assign Activity - The Delay
Activity - The Do While Activity - The If Activity - The Switch Activity - The While Activity -
The For Each Activity - The Break Activity - Data Manipulation - Data Manipulation
Introduction - Scalar variables, collections and Tables - Text Manipulation - Data Manipulation -
Gathering and Assembling Data
RBT: L1, L2, L3
Module – 4
Recording and Advanced UI Interaction - Recording Introduction - Basic and Desktop 08
Recording - Web Recording - Input/Output Methods - Screen Scraping - Data Scraping -
Scraping advanced techniques - Selectors - Selectors - Defining and Assessing Selectors -
Customization - Debugging - Dynamic Selectors - Partial Selectors - RPA Challenge - Image,
Text & Advanced Citrix Automation - Introduction to Image & Text Automation - Image based
automation - Keyboard based automation - Information Retrieval - Advanced Citrix Automation
challenges - Best Practices - Using tab for Images - Starting Apps - Excel Data Tables & PDF -
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Data Tables in RPA - Excel and Data Table basics - Data Manipulation in excel - Extracting
Data from PDF - Extracting a single piece of data - Anchors - Using anchors in PDF.
RBT: L1, L2, L3
Module – 5
Email Automation - Email Automation - Incoming Email automation - Sending Email 08
automation - Debugging and Exception Handling - Debugging Tools - Strategies for solving
issues - Catching errors.
RBT: L1, L2, L3
Course outcomes: The students should be able to:
 To understand Basic Programming concepts and the underlying logic/structure
 To Describe RPA , where it can be applied and how its implemented
 To Describe the different types of variables, Control Flow and data manipulation techniques
 To Understand Image, Text and Data Tables Automation
 To Describe automation to Email and various types of Exceptions and strategies to handle
Question paper pattern:
 The question paper will have ten questions.
 There will be 2 questions from each module.
 Each question will have questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Text Books:
1. Alok Mani Tripathi, Learning Robotic Process Automation, Publisher: Packt Publishing Release Date:
March 2018ISBN: 9781788470940
Reference Books:
1. Frank Casale, Rebecca Dilla, Heidi Jaynes, Lauren Livingston, “Introduction to Robotic Process
Automation: a Primer”, Institute of Robotic Process Automation.
2. Richard Murdoch, Robotic Process Automation: Guide To Building Software Robots, Automate
Repetitive Tasks & Become An RPA Consultant
3. Srikanth Merianda,Robotic Process Automation Tools, Process Automation and their benefits:
Understanding RPA and Intelligent Automation
4. https://www.uipath.com/rpa/robotic-process-automation
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

DEEP LEARNING
(Effective from the academic year 2018 -2019)
SEMESTER – VIII
Subject Code 18AD824 40
CIE Marks

Number of Contact Hours/Week 3:0:0 SEE Marks 60

Total Number of Contact Hours 40 Exam Hours 3 Hrs

CREDITS – 03

Course Learning Objectives: This course will enable students to:

 Identify the deep learning algorithms which are more appropriate for various types of learning
tasks in various domains.
 Implement deep learning algorithms and solve real-world problems.
 Execute performance metrics of Deep Learning Techniques.
Module – 1 Contact
Hours
Deep Feedforward Networks: Gradient-Based Learning, Hidden Units, Architecture 08
Design, BackPropagation. Regularization: Parameter Norm Penalties, Norm Penalties
as Constrained Optimization, Regularization and Under-Constrained Problems, Dataset
Augmentation, Noise Robustness, SemiSupervised Learning, Multi-Task Learning,
Early Stopping, Parameter Tying and Parameter Sharing, Sparse Representations,
Bagging, Dropout.
Text Book1 : Chapter 6 , Chapter 7
RBT: L1, L2, L3
Module – 2

Optimization for Training Deep Models: How Learning Differs from Pure 08
Optimization, Challenges in Neural Network Optimization, Basic Algorithms.
Parameter Initialization Strategies, Algorithms with Adaptive Learning Rates.
Text Book1 : Chapter 8
RBT: L1, L2, L3
Module – 3

Convolutional Networks: The Convolution Operation, Motivation, Pooling, 08

Convolution and Pooling as an Infinitely Strong Prior, Variants of the Basic
Convolution Function, Structured Outputs, Data Types, Efficient Convolution
Algorithms, Random or Unsupervised Features.
Text Book1 : Chapter 9
RBT: L1, L2, L3
Module – 4
 JBoS 31.05.2021 EC 2.2.1., Dated: 29.06.2021

Sequence Modelling: Recurrent and Recursive Nets: Unfolding Computational Graphs, 08

Recurrent Neural Networks, Bidirectional RNNs, Encoder-Decoder Sequence-to-
Sequence Architectures, Deep Recurrent Networks, Recursive Neural Networks. Long
short-term memory
Text Book1 : Chapter 10
RBT: L1, L2, L3
Module – 5

Practical Methodology: Performance Metrics, Default Baseline Models, Determining 08

Whether to Gather More data, Selecting Hyperparameters, Debugging Strategies,
Example: Multi-Digit Number Recognition. Applications: Vision, NLP, Speech.
Text Book1 : Chapter 11 , Chapter 12
RBT: L2, L3, L4
Course outcomes: The students should be able to:

1. Understand the basic concepts of Neural Network.

2. Apply the deep learning algorithms which are more appropriate for various types of learning
tasks in various domains
3. Develop Generative models using Convolutional neural Network
4. Study on recent trends and applications of deep learning
Question Paper Pattern:

 The question paper will have ten questions.

 Each full Question consisting of 20 marks
 There will be 2 full questions (with a maximum of four sub questions) from each module.
 Each full question will have sub questions covering all the topics under a module.
 The students will have to answer 5 full questions, selecting one full question from each module.
Textbooks:

1. Deep Learning, Lan Good fellow and YoshuaBengio and Aaron Courville, MIT Press
https://www.deeplearn ingbook.org/, 2016
Reference Books:

1. Neural Networks, Asystematic Introduction, Raúl Rojas, 1996

2. Pattern Recognition and machine Learning, Chirstopher Bishop, Springer, 2007