9004-027E-UM18-71C6-57TK-P034-****-****

XX06-00A3-U5MZ-AKE4-CH49-AZ3A-****-****

Windows NT based 6.2

AMD64
Wow64Process
Nero Version: 11.0.23.100
Internal Version: 11,0,23,100
(Nero Express)
Recorder: <hp HLDS DVDRW GUD1N> Version: LD02 - HA 1 TA 0 -
11.0.23.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 512kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <hp HLDS DVDRW GUD1N >Version: LD02 - HA 1 TA 0 -
11.0.23.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===

: TOSHIBA DT01ACA100 MS2O iaStorA Port 0 ID 0 DMA: Off
: hp HLDS DVDRW GUD1N LD02 iaStorA Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===

hp HLDS DVDRW GUD1N E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.6.2024
===== Disc-Copy over image - 1st step : Copy to image ...

15:56:13 #1 Text 0 File SCSIPTICommands.cpp, Line 464

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

15:56:13 #2 Text 0 File SCSIPTICommands.cpp, Line 251

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

15:56:13 #3 Text 0 File DVDCopy.cpp, Line 321

DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 997984 NWA -1 (gap 0) Blank
0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

15:56:13 #4 Text 0 File DVDCopy.cpp, Line 425

Max -1 tracks of 1 allowed to copy
1: 0 - 997984 = 997984, TRM_DATA_MODE1, block size 2048, read opt
0 (no read options)

15:56:13 #5 Text 0 File Burncd.cpp, Line 3609

Turn on Disc-At-Once, using DVD media

15:56:13 #6 Text 0 File DlgWaitCD.cpp, Line 333

[ Image Recorder ] Last possible write address on media: 4718591
Last address to be written: 997983

15:56:13 #7 Text 0 File DlgWaitCD.cpp, Line 345

[ Image Recorder ] Write in overburning mode: NO (enabled: CD)

15:56:13 #8 Text 0 File DlgWaitCD.cpp, Line 525

[ Image Recorder ] >>> Protocol of DlgWaitCD activities: <<<
=========================================

15:56:13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 878

Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Datos (modo 1))
2 indices, index0 (150) not provided
original disc pos #0 + 997984 (997984) = #997984/221:46.34
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 997984
blocks [Image Recorder]
--------------------------------------------------------------

15:56:13 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1094

Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1
Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
2043871232, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 997984 | 997984 | 0x00
997984 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaTypes: 0004005e

15:56:13 #11 Text 0 File Burncd.cpp, Line 4462

Caching options: cache CDRom or Network-No, small files-No (<64KB)

15:56:13 #12 PHASE 120 File dlgbrnst.cpp, Line 2030

Creating the image for burning

15:56:14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2924

Verifying disc position of item 0 (not relocatable, no disc pos, no patch
infos, orig at #0): write at #0

15:56:14 #14 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 590400

16:02:04 #15 Text 0 File WriterStatus.cpp, Line 244

 <Image Recorder> start writing Lead-Out at LBA 997984 (F3A60h), length 0
blocks

16:02:04 #16 PHASE 121 File dlgbrnst.cpp, Line 2030

Creating Image completed successfully

16:02:04 #17 Text 0 File SCSIPTICommands.cpp, Line 301

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

16:02:05 #18 Text 0 File SCSIPTICommands.cpp, Line 464

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

16:02:05 #19 Text 0 File Cdrdrv.cpp, Line 12125

DriveLocker: UnLockVolume completed

16:02:06 #20 Text 0 File SCSIPTICommands.cpp, Line 251

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

===== Disc-Copy over image - 2nd step : Burn the image ...

16:02:11 #1 Text 0 File SCSIPTICommands.cpp, Line 464

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

16:02:11 #2 IMAGEGEN -10 File ImageGen.cpp, Line 398

Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2043871232
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <F:\Documents\TempImage.nrg>

16:02:11 #3 SPTI -1196 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x07c5e6c0: Len x20

16:02:11 #4 SPTI -1196 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x07c5f080: Len x20
16:02:11 #5 SPTI -1196 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x07c5ec80: Len x20

16:02:11 #6 Text 0 File Burncd.cpp, Line 3609

Turn on Disc-At-Once, using DVD media

16:02:11 #7 SPTI -1196 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x07c5e940: Len x20

16:02:11 #8 SPTI -1196 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x07c5f480: Len x20

16:02:11 #9 SPTI -1196 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x07c5e180: Len x20

16:04:18 #10 PHASE 40 File dlgbrnst.cpp, Line 2030

Canceled by user

16:04:18 #11 Text 0 File DlgWaitCD.cpp, Line 345

[E: DVDRW GUD1N ] Write in overburning mode: NO (enabled: CD)

16:04:18 #12 Text 0 File DlgWaitCD.cpp, Line 2970

Recorder: hp HLDS DVDRW GUD1N
Medium not present

16:04:18 #13 Text 0 File DlgWaitCD.cpp, Line 525

[E: DVDRW GUD1N ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Desconocido. Medium required by compilation: DVD
R/RW, DVD DL, DVD-RAM.)

16:04:18 #14 Text 0 File SCSIPTICommands.cpp, Line 464

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:04:18 #15 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME