Tool News

New Product Information

New Tools Available – August 2020

Stub Harness
Model Usage: All Models with A6:E5 ECMs • Allows user to flash new and updated
Warranty: Caterpillar One Year
® software to A6:E5 ECMS
Part No. Description Dimensions Weight
596-4120 Stub Harness 300 mm (11.8 in) 1 kg (2.2 lb)

Flash Harness
Model Usage: Tiltrotator Machines • Allows user to flash new and updated
Warranty: Caterpillar One Year
® software to controllers used on tiltrotator
machines
Part No. Description Dimensions Weight
596-4400 Flash Harness 2.5 m (8.2 ft) 2 kg (4.4 lb)

Cotta Rotary Gearbox Wrench

Model Usage: MD6290 • Spanner fits 4-slot lock nuts on cotta rotary • Helps prevent damage caused by using a
Warranty: Caterpillar Six Months
® gearbox hammer and punch to remove or install nut
• Used to remove and install nut on rotary shaft Reference
using proper preload procedure
• NEHGE2014-358
Part No. Description Dimensions Weight
486-4025 Cotta Rotary Gearbox Socket 277.8 x 156 mm (10.9 x 6.2 in) 2.5 kg (5.5 lb)

Torque Wrench
Model Usage: All C175 • Used to loosen and tighten the adjustment • Torque wrench is preset to 120 +/- 15 N.m (90
Warranty: Caterpillar Six Months
® locknut +/- 11 lb-ft)
• Used to turn the adjuster in order to obtain • Preset torque wrench for setting valve lash
the appropriate reading for the valve lash that
is measured on the dial indicator
Part No. Description Dimensions Weight
458-3600 Torque Wrench 616 mm (24 in) 74 mm (163 in)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Cylinder Stroke Limiters
Model Usage: MD6200 • Quickly and securely lockout the mast tilt • Stroke Limiters will fit cylinder rod diameters
Warranty: Manufacturer’s locking cylinder. 28.6 – 38.1 mm (1.12” – 1.5”)
• Prevents unintentional retracting of double- • Includes (4) Segments of Lengths: 19.1, 25.4,
acting hydraulic cylinders (Note: for cylinders 31.8, and 38.1 mm (0.75”, 1”, 1.25”. and 1.5”)
with a rod eye/attachment of diameter larger
than the rod) Reference
• M0104285
Part No. Description Dimensions Weight
599-7349 Cylinder Stroke Limiters 203 x 108 x 69 mm (8 x 4.25 x 2.7 in) 0.9 kg (1.9 lb)

Digital Level
Model Usage: Certain 320 and 323 HEX 599-7345, European Union Compliant, CE marked • 549-3367 Plumb Bob
Warranty: Caterpillar Six Months
®
• 549-2362 and 599-7345 Digital Levels – Used to align the bucket tip with the
– Measures the calibration angle of the boom stick nose pin when completing a bucket
and stick inertial measuring unit (IMU) measure-up for several technology features
sensors utilized by several technology including the GRADE and PAYLOAD
features including the grade and payload systems on Next Gen Excavators
systems on Next Gen excavators Reference
– Reduces the complexity of the calibration • MOO93181, MOO82996, MOO104409
procedure in comparison to calibrating
using a traditional bubble level
– High accuracy level, magnetic mounting,
and large readout allow for easy calibration
Part No. Description Dimensions Weight
Digital Level (Wireless Blue Tooth Version. 188 x 62 x 37 mm
599-7345 0.9 kg (1.9 lb)
Bluetooth range of approximately 15 m (50 ft) (7.4 x 2.4 x 1.4 in)
70 x 70 x 23 mm
549-2362 Digital Level (Wired USB) 1 kg (2.2 lb)
(2.8 x 2.8 x 0.9 in)
63.5 mm
549-3367 Plumb Bob 8 oz
(2.5 in)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Special Tools for 140GC Transmission Disassembly
Model Usage: 140GC Reference
Warranty: Manufacturer’s M0104787, Transmission Disassemble
and Assemble
Part No. Description Weight
589-7478 Puller for removing primary oil supply pump from gear case 0.8 kg (1.7 lb)
589-7478 589-7479 Puller Gp- Gear case and clutch pack shaft 0.8 kg (1.7 lb)
589-7480 Assembly Jig- Helical spring compression tool for piston carrier 0.2 kg (0.4 lb)
589-7481 Puller Gp- Countershaft from gear case 1.1 kg (2.5 lb)
589-7482 Driver Gp for installing covers in housing bore 0.2 kg (0.4 lb)
589-7483 Handle for drivers 0.2 kg (0.4 lb)
589-7479
589-7484 Driver for lock plate on final drive 0.3 kg (0.6 lb)
589-7485 Driver for final drive shaft bore seals 0.2 kg (0.4 lb)
589-7486 Sleeve to preheat housing and bearing components 0.5 kg (1.1 lb)

589-7480

589-7481

589-7482 589-7483 589-7484 589-7485 589-7486

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Separator Fork
Model Usage: Rotary Mixers RM500, RM500B • Use for separating ball joints and tie rods • Zinc clear chromate finish provides bright
Warranty: Lifetime • Use with common air hammer plating for greater visibility and corrosion
resistance.
• 1” opening
Part No. Description Dimensions Weight
592-9019 Separator Fork 187.3 mm (7 3/8 in) OAL 0.33 (0.73 lb)

Safety Glasses, Cat® Branded, Planer

Warranty: DATE OF PURCHASE • Meets and exceeds the following standards • 8-base curve lens for optimum protection
for safety: CE EN 166:2001, ANSI Z87.1:2003, • Lightweight polycarbonate construction
CSA Z94.3:2007 and AS/NZS 1337.1:2010
• Vented, flex-fit temples
• 2 mm polycarbonate material tested at
velocity to shield from impact • Package qty 10
• Molded comfort nose bridge
• Fog and scratch resistant
Part No. Description Dimensions Weight
592-7466 Clear Lens
45 x 143 x 160 mm (1.8 x 5.6 x 6.3 in) 32 g (1.1 oz)
592-7467 Smoke Lens

Safety Glasses, Cat® Branded, Rebel

Warranty: DATE OF PURCHASE • Meets and exceeds the following standards • Fog and scratch resistant
for safety: CE EN 166:2001, ANSI Z87.1:2003, • Double injection rubber temples
CSA Z94.3:2007 and AS/NZS 1337.1:2010
• Package qty 10
• 2mm polycarbonate material tested at velocity
to shield from impact
Part No. Description Dimensions Weight
592-7468 Clear Lens
43 x 146 x 164 mm (1.7 x 5.7 x 6.5 in) 25 g (0.9 oz)
592-7469 Smoke Lens

Axle Shaft Installation Guide

Model Usage: D11 • Nylon tool that prevents damaging the Final • Acts as a guide for the 5P-7395 and helps
Warranty: Caterpillar Six Months
® Drive Lip Seal during installation of the final prevent the end of installer from damaging
drive inner axle the lip seals.
• Used in conjunction with the current 5P-7395 • Axle installer passes through the inside of
598-3102 after tool is positioned onto the
final drive.
Part No. Description Dimensions Weight
598-3102 Axle Shaft Installation Guide Dia 191 x 420 mm (7.5 x 16.6 in) 2.96 kg (6.5 lb)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

To Subscribe or Unsubscribe to publications like this one, visit the Tool News Page.

Global Dealer Solution Network

Parts Technical
North America 877-228-2420
International 309-266-4421
https://dealer.cat.com/gdsn

PEDP9135-50 AUGUST 2020

© 2020 Caterpillar • All Rights Reserved
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as
corporate end product identity used herein, are trademarks of Caterpillar and may not be used without permission.