Tool News

New Product Information

New Tools Available – July 2020

Bracket Assembly
Model Usage: C27, C32 • Adapter plates fitted to 1U-5750 rollover • Can also be used for installation of front and
Warranty: Caterpillar Six Months
® stand used for cylinder block cleaning and rear housings and liner assemblies
audit procedures (M0080689) • Heads, pans, and engine top hardware
removed when used
Part No. Description Dimensions Weight
570-4824 Bracket Assembly 430 x 323 x 215 mm (17 x 13 x 8.5 lb) 25.4 kg (56 lb)

Front and Rear Engine Main Seal Tools

Model Usage: C2.8 and C3.6L Engines • Used to remove and install the rear crank seal • Procedure much easier than other methods
Warranty: Caterpillar Six Months
® and the front crank seal into the cylinder block • Prevents damage to block or seals by using
the correct tools
Part No. Description Dimensions Weight
589-7461 589-7461 Tool Assembly- Rear Seal Installer 90 x 116.4 mm 2.0 kg (5 lb)
589-7462 Tool Assembly - Front Seal Installer 130 x 130 mm 5.9 kg (13.5 lb)
589-7463 Tool Assembly - Front Seal Removal 60 x 103 mm 1.1 kg (2.4 lb)
589-7464 Tool Assembly - Rear Seal Removal 98 x 145 mm 1.6 kg (3.6 lb)

589-7462

589-7463

589-7464

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Articular Transmission Bearing Drivers
Model Usage: 760 Articulated Truck • Used to service the 760 Art Truck transmission • 576-6157: Used to install 353-4914 bearing
Warranty: Caterpillar Six Months
® PN 550-2440 • 576-6158: Used to install 509-9175 bearing
• 576-6156: Used to install 353-4910 bearing
Part No. Description Dimensions Weight
576-6156 DRIVER (DIA 128) 137 x 30 mm (5.4 x 1.2 in) 3 kg (7 lb)
576-6157 DRIVER (DIA 84) 104 x 30 mm (4 x 1.2 in) 1.4 kg (3 lb)
576-6158 DRIVER (DIA 164) 137 x 30 mm (5.4 x 1.2 in) 5.3 kg (12 lb)

Water Nozzle
Model Usage: Water Trucks with Fast-Fill • Fast-fill nozzle for water trucks Specifications
Capability • Similar to other fast-fill nozzles, but – Size: 2 in. female coupler
Warranty: Caterpillar® Six Months specifically made for water trucks equipped – Internal thread : 1 ½-11-1/2 NPT
with the fast-fill option – Material: Housing/Handle-cast aluminum
– Seals-BUNA-N
– Pressure rating: 200 psi
Part No. Description Diameter Weight
575-2277 Water Nozzle 51 x 218.4 x 231 mm (2 x 8.6 x 9 in) 2.5 kg (5.5 lb)

Clutch Alignment Tool Assembly

Model Usage: 657K Scrapers • Aligns slipper clutch packs of the transfer • Embedded magnets in tool hold it in position
Warranty: Caterpillar Six Months
® gear group when bolting to the flywheel during alignment of clutch pack.
Part No. Description Dimensions Weight
589-7447 Clutch Alignment Tool Assembly 195 x 66 THK mm (8 x 2.6 THK in) 0.78 kg (1.7 lb)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Generator Lift Device
Model Usage: 794, 796, 798 European Union Compliant, CE marked • Dump body doesn’t have to be removed. Low
Warranty: Caterpillar Six Months
®
• Replaces 465-5630 profile of tool minimizes how far the dump
body must be raised.
• Used to remove or install the generator on
794, 976, or 798 Reference
• Lifts the generator for all three trucks level - • Tool Operating Manual, NEHS1210
no guesswork
Part No. Description Diameter Weight WLL
6804 kg
589-7460 Generator Lift Device 320 x 850 x 1200 mm (12.6 x 33.5 x 47.2 in) 61 kg (134 lb)
(15,000 lb)

DEF Nozzle Optional Handle and O-ring Seal

Model Usage: 584-9979 DEF Nozzle • DEF nozzle optional handle and o-ring seal
Warranty: Caterpillar® Six Months Part No. Description
587-3371 Rear Cap
587-3372 Standard Handle for Hose Barb fitting
587-3371 587-3373 ¾ inch Hose Barb Fitting For Standard Handle
587-3374 O-ring Seal
587-3375 HANDLE-Optional 1 inch Female NPT Thread

587-3372

587-3373

587-3374

587-3375

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Cat® Large Angle Wrenches
Warranty: Caterpillar® Lifetime • Individual large size angle wrenches • Sized for optimum comfort and balance
requested by Cat® dealers • Nickel-chrome plating helps protect against
• Cat branded corrosion and makes it easy to wipe clean.
• Manufactured from special alloy steel and • Angle head wrenches are the same size on
heat treated for optimum strength and both ends to permit use of one wrench in four
durability positions.
592-3528
• Flank-Drive® Plus wrenching profile on open • Angle head wrenches offset at 30° and 60°
end “bites” into the fastener, preventing angles to the handle.
slipping and rounding of the fasteners, while
providing up to 62% more turning power and
strength.
Part No. Description Dimensions Weight
592-3529 1-3/16” SAE Four-Way Angle Head
12 9/32” (312 mm) overall length, 2 11/32”
0.47 kg
592-3528 (60 mm) wrench head outside diameter,
Open-End Wrench (1.04 lb)
3/8” (10 mm) head depth
14 19/32” (371 mm) overall length, 2 27/32”
1-7/16” SAE Four-Way Angle Head 0.79 kg
592-3529 (72 mm) wrench head outside diameter,
Open-End Wrench (1.74 lb)
7/16” (11 mm) head depth
19 3/4” (502 mm) overall length, 3 31/32”
2” SAE Four-Way Angle Head 1.96 kg
592-3530 592-3530 (101 mm) wrench head outside diameter,
Open-End Wrench (4.31 lb)
9/16” (14 mm) head depth

Cat® Bearing Race Punch Set (4-piece)

Warranty: Caterpillar® Lifetime • Punches for the removal of bearing races • Made from specially heat treated steel
• 7/16”, 1/2”, 5/8” and 9/16” sizes • Black oxide finish deters rust.
accommodate various bearing sizes. • Includes pouch
• Made in the USA.
Part No. Description Dimensions Weight
589-6675 4-Piece Cat® Bearing Race Punch Set 83 x 533 x 25 mm (3.25 x 21 x 1 in) 1.6 kg (3.5 lb)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
HEDC Connector Tools
Model Usage: HEDC • New tools for new connectors used on HEDC • Used with hand crimp tool 509-3830
Warranty: Caterpillar One Year
® products
Part No. Description Dimensions Weight
551-3953 TOOL-EXTRACTION (CLEAN BODY) 100 x 25 x 25 mm (3.93 x 0.98 x 0.98 in) 0.25 kg (0.6 lb)
551-3953
551-3981 TOOL-EXTRACTION (AMP MCP 1.2) 100 x 25 x 25 mm (3.93 x 0.98 X 0.98 in) 0.25 kg (0.6 lb)
551-3988 DIE-CRIMP (MICRO TIMER) 75 x 75 x 75 mm (2.95 x 2.95 x 2.95 in) 0.5 kg (1.1 lb)
551-3989 DIE-CRIMP (TAB 2.8) 75 x 75 x 75 mm (2.95 x 2.95 x 2.95 in) 0.5 kg (1.1 lb)
551-3990 DIE-CRIMP (MCP 2.8) 75 x 75 x 75 mm (2.95 x 2.95 x 2.95 in) 0.5 kg (1.1 lb)
551-3981 551-3991 DIE-CRIMP (MCP 1.5) 75 x 75 x 75 mm (2.95 x 2.95 x 2.95 in) 0.5 kg (1.1 lb)

551-3988

551-3989

551-3990

551-3991

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools

New Product Information
Adapter Cable
Model Usage: 777E OHT • Used to shift transmission and measure speed • Speed sensor plugs can also be connected to
Warranty: Caterpillar One Year
® sensor output signals during bench test the Transmission Analyzer III using the 2-pin
• Used with 277-2362 Transmsion Analyzer III Deutsch receptacles.
Group • Speed sensor breakouts approximately 200
• 40-pin connector plugs into 306-0397 mm (7.87 in) long
extension cable.
Part No. Description Dimensions Weight
589-7470 Adapter Cable 425 mm (16.7 in) 0.5 kg (1.1 lb)

Harness Assembly TA3 Program

Model Usage: R1700K Load Haul Dump Truck • Used to shift transmission during bench test • Harness connects 306-0397 extension cable
Warranty: Caterpillar One Year
®
• Used with 277-2362 Transmission Analyzer III to the intermediate transmission harness.
Group and 306-0397 extension cable
Part No. Description Dimensions Weight
585-8759 Harness Assembly 1.0 m (3.28 ft) 0.5 kg (1.1 lb)

Dealer Service Tools • USA: 1-800-542-8665, option 1 • International: 1-309-578-7372 • dealer.cat.com/dealer-service-tools