Scribd
Upload
34 views

SLD Naming Convention

Uploaded by

ayash mohanty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
34 views

SLD Naming Convention

Uploaded by

ayash mohanty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Naming Conventions to be used for SLD:

Sl. Reference Nomenclature


Bus Arrangement Remarks
No. Drawing (SLD) Concept
- Bus Section: - 3BS189, 3BS289,
3BS389…
- PT isolator:- 3PT189, 3PT289,
…..
- Station Transformer: - 3ST189,
3ST289…….
Main and Transfer Chandikhol - Note:- In case single Bus
1 M, L & T Concept
Bus Scheme GSS system “89T: shall not be
there.
- Nomenclature to be adopted
for transformer 89Tr.
- Similarly for 132kV will start
with 1, 220kV will start with 2
and 400kV will start with 4
a. 89A-Left Ring
- Transformer-1 shall be the
isolators
reference and nomenclature
b. 89B-Right Ring
to be increasing from left to
isolator
right in clockwise mode,
c. 89C- Line isolator
2 Ring Bus Scheme Choudwar GSS looking towards feeder /
d. 89LE- Line E/s
equipment.
e. 30130252 -
- In case of AB switch no
Breaker
naming convention will be
f. 3ST189, 3ST289
followed.
for station Tfr.
2 main bus isolator,
a. 2BSA189, 2BSB189:-1st
isolator (left side) of Bus-1 &
A, B, C Concept
2 respectively.
A: Main Bus-1
b. 2BSA289, 2BSB289:-2nd
B: Main Bus-2
isolator (right side) of Bus-1 &
C: Isolator before
2 respectively.
Bkr
Double Main Bus c. 2BSC189, 2BSC289:-1st
3 Gunupur GSS D: Isolator after
Scheme isolator (left side) & 2nd
Bkr
isolator (right side) of transfer
E: Bkr bypass
bus respectively.
isolator
d. For PT, the naming should be
LE: Line ES
2PTA189 for Main Bus-1 and
TrE: transfer ES
2PTB189 for Main Bus-2,
similarly for other voltage
levels.
A, B, C Concept Isolators: 10189A, 10189B,
A: Main Bus-1 10189C, 10189AE (A bus ES),
Double Main &
B: Main Bus-2 10189BE (B bus ES), 10189LE
4 Transfer Bus Katapali GSS
C: Transfer Bus (Line ES), 10189TrE (Transfer ES)
Scheme
D: Line For PT, ST similar nomenclature
LE: Line ES will be used as Sl. 1, 2 & 3

1|Page
One and half Pandiabil GSS One change only: Tr will be used
5 POWERGRID concept
breaker scheme of POWERGRID for transformer

Note:
1. For reactor:- “R” will be used, similarly for reactor ES - RE
2. For Capacitor:- Bank “CP” will be used.
a. 3 series will be used in case of 33kV bus. Reference SLD is Cuttack GSS.
Isolator: 30289M (main isolator), 30289CP (capacitor isolator) ES: 30289CPE

2|Page

You might also like