Freio de Haste
Freio de Haste
Technical data
Part No. Piston Ø suitable piston rod Ø Piston rod extension Compressed air Static holding force
connection
0821401130 32 mm 12 mm 79 mm G 1/8 840 N
0821401131 40 mm 16 mm 81 mm G 1/8 1100 N
0821401132 50 63 mm 20 mm 100 mm G 1/8 2700 N
0821401133 80 100 mm 25 mm 140 mm G 1/8 5800 N
0821401130 1,75 kg
0821401131 1,75 kg
0821401132 3 kg
0821401133 8,8 kg
Holding force at 0 bar, Mounting elements LU3, LU4, LU5 are required for assembly and must be ordered separately as accessories.
Technical information
Warning:
The Locking unit may not be used for the following applications:
- for dynamic holding
- in or as safety equipment
Locking unit may only be unlocked when turned off.
Note:
The minimum release pressure is >= the working pressure of the cylinder!
The holding force is dependent on the set spring force
Page 2 | AVENTICS
Technical information
Material
Dimensions
Dimensions
Dimensions
V ØW ØX ØY
10 29.9 24 3
10 39.9 30 3
10 39.9 30 3
10 54.9 40 5
Emerson.com
Facebook.com/EmersonAutomationSolutions
LinkedIn.com/company/Emerson-Automation-Solutions
Twitter.com/EMR_Automation
An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. This
Document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS GmbH. It may not be
reproduced or given to third parties without its consent. Only use the AVENTICS products shown in industrial applications. Read the product
documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When
integrating the product into applications, note the system manufacturer's specifications for safe use of the product. The data specified only serve to
describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information.
The information given does not release the user from the obligation of own judgement and verification. It must be remembered that the products are
subject to a natural process of wear and aging.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand logotype are registered trademarks of one
of the Emerson family of companies. All other marks are the property of their respective owners. © 2020 Emerson Electric Co.
All rights reserved.
2020-12