Prosine 2.5/3.

0 Inverter/Chargers

Provides 2500/3000 watts of sine wave AC power from a DC source and

multistage battery charging
The Prosine 2.5 and 3.0 inverter/chargers offer a powerful all-in-one solution, delivering unsurpassed CSA/NRTL certified to UL & CSA standards
clean true sine wave electrical power for all types of appliances along with technologically superior
three-stage charging for longer battery life. Offering a revolutionary technology and power to weight
ratio, Xantrex Prosine technology is the benchmark for premium integrated power systems.

Prosine 2.5/3.0
2500/3000 watt inverter, 50 A surge capability
Power factor corrected multistage charger
True sine wave output (crystal controlled)
Built-in 30 A transfer switch automatically transfers between inverter power and incoming AC power
Equalization mode conditions batteries for longer life
Power sharing prevents tripping of shorepower breaker
Compact, lightweight, and easy to install
Includes remote panel and battery temperature sensor
Two year warranty

Protection Features
Over voltage and under voltage protection
Over temperature protection and automatic overload protection Xantrex Technology Inc.
Short circuit AC backfeed protection Headquarters
8999 Nelson Way
Options
Burnaby, British Columbia
Available in 12 volt and 24 volt models
Canada V5A 4B5
GFCI-equipped AC wiring box
800 670 0707 Toll Free
Prosine 2.5 Remote Panel (Included) 604 420 1591 Fax
Independent inverter and charger on/off controls
LED bar graph display of DC volts and amps 5916 195th Street NE
LED fault diagnostics Arlington, Washington
USA 98223
Prosine 3.0 (ACS) Remote Panel (Included) 800 446 6180 Toll Free
Independent inverter and charger on/off controls 360 925 5143 Fax
Push button control of power sharing, equalizing, battery set-up
Easy to read backlit digital display
Single at-a -glance display of AC and DC system information
www.xantrex.com
Text message fault diagnostics

© 2004 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. Printed in Canada
Smart choice for power

2500/3000 Watt True Sine Wave

Electrical Specifications - Inverter

Models Prosine 2.5 Prosine 3.0
Output power (continuous) 2500 watts 3000 watts
Surge rating (5 sec.) 4000 watts 4000 watts
Output current (peak) 50 A 50 A
Output voltage (at no load) 120 VAC +/-3% 120 VAC +/-3%
Output voltage (over full load and battery voltage range) 120 VAC RMS -10% / +4% 120 VAC RMS -10% / +4%
Output frequency 60 Hz +/-0.05% (crystal controlled) 60 Hz +/-0.05% (crystal controlled)
Output waveform True sine wave <5% THD True sine wave <5% THD
Peak efficiency 88% 88%
No load current draw (search mode) <3 W <3 W
No load current draw (with inverter on) <60 W <60 W
Input DC voltage range (12 V/24 V) 10 – 16 VDC / 20 – 32 VDC 10 – 16 VDC / 20 – 32 VDC

Electrical Specifications - Charger

Charger rate (12 V/24 V) 100 A/50 A 120 A/60 A
Output voltage (nom. 12 V/24 V - depending on settings)
Charge 13.8 – 14.8 VDC / 27.6 – 29.6 VDC 13.8 – 14.8 VDC / 27.6 – 29.6 VDC
Float 13.1 – 14.2 VDC / 26.2 – 28.4 VDC 13.1 – 14.2 VDC / 26.2 – 28.4 VDC
Equalize 14.0 – 18.0 VDC / 28.0 – 26.0 VDC 14.0 – 18.0 VDC / 28.0 – 26.0 VDC
Charge control 3 stage with manual equalize 3 stage with manual equalize
Charge temperature compensation Automatic with sensor Automatic with sensor
Efficiency >80% >80%
AC input power factor (charger on) 0.99 0.99
Input AC voltage range 90 – 135 VAC 90 – 135 VAC

General Specifications
Compatible battery types Flooded / gel Flooded / gel
Transfer relay rating 30 A 30 A
Transfer time (AC to inverter and inverter to AC) 20 ms typical 20 ms typical
Storage temperature range -22°F – 158°F (-30°C – 70°C) -22°F – 158°F (-30°C – 70°C)
Operating temperature range 32°F – 140°F (0°C – 60°C) 32°F – 140°F (0°C – 60°C)
Dimensions (H x W x D) 5.5 x 15.0 x 20.0” (140 x 381 x 508 mm) 7.0 x 15.0 x 20.0” (178 x 381 x 508 mm
Weight 32.0 lb (14.5 kg) 32.0 lb (14.5 kg)
Warranty Two years Two years
Part numbers 805-3025 (12 V w/standard remote) 805-3030 (12 V w/ACS remote)
805-3026 (24 V w/standard remote) 805-3031 (24 V w/ACS remote)
808-3026 (DC wiring box) 808-3026 (DC wiring box)
808-3027 (GFCI option) 808-3027 (GFCI option)
808-3025 (ACS remote display - optional) 808-2035 (ACS remote display)

Regulatory Approvals
CSA/NRTL approved to CSA 107.1, UL 458

Note: Specifications subject to change without notice.

© 2004 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. Printed in Canada