Quick Alarm Programming DSC 1832
Uploaded by
ScribdTranslationsQuick Alarm Programming DSC 1832
Uploaded by
ScribdTranslationsQuick alarm programming DSC 1832
To enter programming mode, enter (* 8 5555) depending on the model.
• To program zones enter section 001
Define type of zones:
01 = Delay zone 1 (entry door)
03 = Instant Zone (perimeter)
06 = Inner zone with delay
16 = Panic zone (24 hour button)
Press (#) to exit section 001 and return to the main programming
menu.
ENTRY AND EXIT TIMES AND SIREN CUT OFF.
• Enter programming mode (*8 5555) followed by section 005 partition
01
Followed by time:
020 (Sec) Entry time
020 (Sec) Exit time
001 (Min) Siren cut-off time.
It automatically exits section 005 and returns to programming mode.
USER CODE CHANGE.
• Enter with the installer code:
(* 8 5555) enter section 007 and enter a new 4-digit user code. This
will replace the master code 1234, which is the code with which we
activate the factory alarm.
Example: * 8 5555 007 (code 7777) and the confirmation beep will
sound and this will be automatically registered.
SCUA SIREN WHEN ARMING AND DISARMING THE ALARM.
• Enter programming mode (* 8 5555) enter section 014 activate option
1 to activate the scua. Press # to exit
• Enter section 017 and verify that option 8 is off, only options 1 and 7
will be on.
SCHEDULE TIME AND DATE.
• Enter * 6 1234 1 HH-MM-DD-YY Press ## to exit programming.
If the user code is changed, you must enter it like this:
Example: * 6 7777 1 HH-MM-DD-YY press ## to exit programming.
REMOTE CONTROL PROGRAMMING.
• Enter programming mode (* 8 5555) enter section 804 41 ESN ## #
In the same section 804 enter section 69 03 04 27 30 # # #
Hexadecimal codes: A=*1* B=*2* C=*3* D=*4* E=*5* F=*6*
• To program key fobs version 4.6:
Enter programming mode * 8 5555 804 101 (ESN 64*5**3*26) # # #
For a second remote control, enter option 42 to 116 for keychain
number 16.
SCHEDULE CELL PHONE CALL.
• Enter programming mode (* 8 5555) enter the following sections:
303 – enter phone number
301 – Enter phone number again.
160 – enter 001
161 – enter 007
380– Turn on keys 1, 5 and 6
381 – turn off key 7
361 – Turn on key 1
363 – Turn off 1
365 – Turn off 1
367 – Turn off 1
368 – Turn off 1
360 – enter 03, 03.
Alarm trigger memory: Press * 3 and it will show the zones that were
activated. Press # # to exit memory.
PROGRAMMING WIRELESS SENSORS CARD MODEL PC1864, PK5501
KEYBOARD, RF5132 RECEIVER.
• Enter programming (* 8 5555) section 804 09 (ESN 508*6**1*7) # #
Define how it will work in (* 8 5555) section 001.
O1 for entry and exit delay
03 instant
06 inner zone with delay
Press the arrow to the right 16 times, and enter the zone definition, for
example 01 entry and exit delay.
Press # to exit.
• Enter section 109, activate number 8 indicating that it is a wireless
zone, press # # # to exit.
Zone 1 = 101 Option 8 zone 63 = 163
Zones 2 = 102 Option 1 activated zone 64 = 164
