Scribd
Upload
12 views

Sym Deck Designer Print-Simple

Uploaded by

Panos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

Sym Deck Designer Print-Simple

Uploaded by

Panos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

UNIVERSITY OF THESSALY

SYMDECK DEPARTMENT OF CIVIL ENGINEERING


Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

1. GEOMETRY

2. LOADS

Self weight : 2.73 kN/m²


Aditional dead load : 2 kN/m²

Live loads : q kN/m²


Span 1 q=5

PARTIAL SAFETY FACTORS FOR LOADS

Dead loads: γG= 1.35


Live loads : γQ= 1.5

3. General data

Thickness of profiled steel sheeting t = 1.00 mm


Quality of profiled steel Fe320G
Slab thickness h = 0.15 m
Type of concrete C25/30
Type of reinforcement steel S500s
Distance from the steel reinforcement in tension to the extreme fibre of the composite slab in tension es = 0.03 m
Cross-sectional area of reinforcement As = 3.351 cm ² / m
Diameter of reinforcement steel Φ 8 mm per d = 15 cm

Project name: Part:


Company: Author: page : 01
UNIVERSITY OF THESSALY
SYMDECK DEPARTMENT OF CIVIL ENGINEERING
Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

4. PARTIAL SAFETY FACTORS FOR MATERIALS

γM1 = 1.00
γc = 1.50
γs = 1.15

5. MOMENTS OF INERTIA

Construction phase EJ = 309.176 kNm²/m


Composite phase EJ = 3733.383 kNm²/m

6. EXPERIMENTALY DETERMINED COEFFICIENTS

m = 90.83
k = 0.0144

Project name: Part:


Company: Author: page : 02
UNIVERSITY OF THESSALY
SYMDECK DEPARTMENT OF CIVIL ENGINEERING
Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

7. BENDING AND SHEAR STRENGTHS

i) Steel profile
+
Positive design moment M Rd,S (kNm)

Span 1 9.15

-
Negative design moment M Rd,S (kNm)

ii) Composite cross-section


+
Positive design moment M plRd= 35.28 kNm
Negative design moment Μ -plRd = 14.86 kNm
Shear strength VRd2= 31.40 kN

Longitudinal shear stength V lRd (kN)

Span 1 20.46

8. NORMS

- Eurocode 1: Actions on structures - Part 1.1:


General actions - densities, self-weight, imposed loads for buildings (ENV 1991-2-1:1995)

- Eurocode 1: Acrions on structures - Part 1.2:


Actions on structures exposed to fire (ENV 1991-2-2:1995)

- Eurocode 3: Design of Steel Structures - Part 1.3:


General rules - supplementary rules for cold formed thin gauge members and sheeting (ENV 1993-1-3:1996)

- Eurocode 4: Design of composite steel and concrete structures - Part 1-1:


General rules and rules for buildings (ENV 1994-1-1:1992)

- Eurocode 4: Design of composite steel and concrete structures - Part 1-2


General rules - Structural fire design (ENV 1994-1-2:1994)

- ENV 1992-1-1 Eurocode 2: Design of Concrete Structures – Part 1:


General rules and rules for buildings

Project name: Part:


Company: Author: page : 03
UNIVERSITY OF THESSALY
SYMDECK DEPARTMENT OF CIVIL ENGINEERING
Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

9. CONSTRUCTION PHASE CHECKS

i) Bending check

Load combination : γG Gp+ (γGGc + γQ 0.75) + γQQconstr

Where the load Qconst is the construction load. It is a uniformly distributed load of 1.5 kN/m² applied on a
3m X 3m area (or on the entire span length, if it less than 3m) and a uniformly distributed load of 0.75 kN/m²
applied on the remaining area.

The bending check is fulfilled!

The coefficient of cross-section usage is: 0.54 < 1.00

Project name: Part:


Company: Author: page : 04
UNIVERSITY OF THESSALY
SYMDECK DEPARTMENT OF CIVIL ENGINEERING
Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

ii) Deflections check

Deflections calculated for G

Limiting deflection: L/180 or 20mm

The deflections check is fulfilled!

The coefficient of cross-section usage is: 0.36 < 1.00

Project name: Part:


Company: Author: page : 05
UNIVERSITY OF THESSALY
SYMDECK DEPARTMENT OF CIVIL ENGINEERING
Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

10. COMPOSITE SLAB CHECKS

i) Bending moments check

Load combination : γG ( G + G add. dead load) + γQ Q

The bending moments check is fulfilled!

The coefficient of cross-section usage is: 0.33 < 1.00

ii) Vertical and Longitudinal shear check

Load combination : γG ( G + G add. dead load) + γQQ

The vertical shear check is fulfilled!

The coefficient of cross-section usage is: 0.57 < 1.00

The longitudinal shear check is fulfilled!

The coefficient of cross-section usage is: 0.88 < 1.00

Project name: Part:


Company: Author: page : 06
UNIVERSITY OF THESSALY
SYMDECK DEPARTMENT OF CIVIL ENGINEERING
Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

iii) Deflections check

Deflections calculated for G + Q

Limiting deflection: L/250

The diflections check is fulfilled!

The coefficient of cross-section usage is: 0.14 < 1.00

Project name: Part:


Company: Author: page : 07
UNIVERSITY OF THESSALY
SYMDECK DEPARTMENT OF CIVIL ENGINEERING
Laboratory of structural analysis
DESIGNER Laboratory of Concrete technology

11. Fire resistance check

Information and data for calculations:

t req= 90
Reinforcement in the lower flange Ø 8 / 0.1875 m
Distance of the reinforcing bar from the lower flange 0.03 m

i) Thermal insulation

In accordance with the insulaion criteria, the temprature rise on the top surface of the slab
should not exceed an average value of 140 °C or a maximum of 180 °C

t i> t req - check fulfilled!

ii) Effective thickness check:

heff > h eff,min - check fulfilled!

iii) Bending check

Load combination: G + Ψ2Q


Μfi,rd > M fi,d - check fulfilled!
Utilization coefficient: 0.95

The program SYMDECK DESIGNER developed in the Department of Civil Engineering of the University of Thessaly, Greece
(UTH) within the research project “DESIGN LOADS FOR COMPOSITE SLABS WITH PROFILED STEEL SHEETING”
which was funded by Elastron S.A

Project team:

Project leader: E. Mistakidis, Professor of Structural Analysis, Director of the Laboratory of Structural
Analysis and Design, email: [email protected], tel. +30-24210-74171, mob. +30-697-4718682
Leader of the experimental P. Perdikaris, Professor of Reinforced Concrete Structures, Director of the Laboratory of
project: Concrete Technology and Reinforced Concrete Structures, email: [email protected],
tel.+30-24210-74151
Software Development: K. Dimitriadis, Civil Engineer UTH Greece, email: [email protected]
[email protected], tel. +46704568911

Scientific personnel: Dr. O. Panagouli, Civil Engineer NTUA Greece, Dr. Κ. Tzaros, Civil Engineer UTH,
A. Giannopoulos, Civil Engineer UTH, Κ. Papachristou, Civil Engineer UTH
Dr. Daphne Pantousa, Civil Engineer UTH

Symdeck Designer - v2.0 Copyright (C) 2005-2016

Project name: Part:


Company: Author: page : 08

You might also like