Formula for 1000 polypots = W2 x

L/3140
Gives volume in Cubic Meter per
volume 1000 Bags.
Where
6”x10”W (15cm
& L are xwidth length of
25 cm)=15.0 1''= 2.54 cm
EX. Poly Bag in Cms.
Cm x 25.5 Cm =1.827 Cum
1.827 Cum
15 25.50
Bag size 0.001827
3.937 Cum
20.3 30.00
Bag size 0.003937 0.393700
22566.497 Cum
405 432
Bag size 15 x 16 22.566497 2256.649700

Formula for 1000 polypots = W2 x L/3140

Gives volume in Cubic Meter per 1000 Bags.
Where W & L are width length of Poly Bag in Cms.

size Kg/each L in Cm B in Cm 1000 No.s

2.5 4" x 7" 10.00 17.50 0.557 Cum 0.000557
5" x 8" 12.50 20.00 0.995 Cum 0.000995
5" x 9" 12.50 25.00 1.244 Cum 0.001244
4" x 6" 1.00 10.00 15.00 0.478 Cum 0.000478
7" x 8" 2.00 17.50 20.00 1.951 Cum 0.001951
8" x 10" 4.00 20.00 25.00 3.185 Cum 0.003185
8" x 12" 7.00 20.00 30.00 3.822 Cum 0.003822
13" x 13" 10.00 32.50 32.50 10.933 Cum 0.010933
15" x 16" 20.00 37.50 40.00 17.914 Cum 0.017914
18" x 18" 35.00 45.00 45.00 29.021 Cum 0.029021
21" x 21" 50.00 52.50 52.50 46.084 Cum 0.046084
25" x 25" 62.50 62.50 77.752 Cum 0.077752
30" x 30" 75.00 75.00 134.355 Cum 0.134355

Formula As per IS 4923:1997 Page No.4

Hollow Section
Width B 50 mm
Depth D 25 mm
Thickness T 3.2 mm
Area A
4.126 Sqcm
Weight per RMT
3.24 Kg/Rmt
Hollow Section
Width B 25 mm
Depth D 25 mm
Thickness T 3.2 mm
Area A
2.526 Sqcm
Weight per RMT
1.98 Kg/Rmt
Formula As per IS 4923:1997 Page No.4

A.P. Greening & Beautification Corporation -21-22

 Raising plantations and landscape development works in ULB wise Red soil (SoR 2021-2022)

Convey
Name of
Name of the Name of Initial ance Total
Sl. No. the Lead Unit
ULB the Source Cost Charge (5+7)
District
s

(1) (2) (3) (4) (4) (5) (6) (7) (8)

Central
Zone
1 Bhimavaram Telikicherla 41.00 250.00 1 Cum 552.00 802.00

2 West Godavari Eluru Bhimadolu 25.00 250.00 1 Cum 348.00 598.00

3 Tadepalligudem Telikicherla 30.00 250.00 1 Cum 420.00 670.00

4 Eluru Gudivada Gollanapalle 63.00 250.00 1 Cum 816.00 1066.00

5 Krishna Gudivada Gollanapalle 57.00 250.00 1 Cum 744.00 994.00

5 NTR District Machlipatnam Bhimadolu 34.00 250.00 1 Cum 468.00 718.00

6 Vijayawada Telikicherla 62.00 250.00 1 Cum 804.00 1054.00

7 Guntur Chilkaluripeta Gudlapalle 60.00 250.00 1 Cum 780.00 1030.00

8 Bapatla Guntur Gannavarm 30.00 250.00 1 Cum 420.00 670.00

9 Palnadu Narasaraopeta Gudlapalle 61.00 250.00 1 Cum 792.00 1042.00

10 Tenali Agiripalle 1 Cum 0.00 0.00

North Zone 54.00 250.00

Patrunivalas 780.00
11 Srikakulam Srikakulam 60.00 250.00 1 Cum 1030.00
a
Patrunivalas 391.20
1 Manyam Srikakulam 28.00 250.00 1 Cum 641.20
a
Kandyamval 588.00
12 Vizianagaram Vizianagaram 44.00 250.00 1 Cum 838.00
asa
Kandyamval 564.00
2 Alluri Sitharama Raju Vizianagaram 42.00 250.00 1 Cum 814.00
asa
13 Visakhapatnam Visakhapatnam Narava 1 Cum 0.00 0.00

3 Anakapalli Visakhapatnam Narava 42.00 250.00 1 Cum 564.00 814.00

14 Kakinada Kakinada Srampalem 60.00 250.00 1 Cum 780.00 1030.00

15 Kona Seema Rajahmahendravaram Pangidi 60.00 250.00 1 Cum 780.00 1030.00

16 East Godavari Rajahmahendravaram Pangidi 48.00 250.00 1 Cum 636.00 886.00

South Zone - 1 60.00 250.00

16 YSR Kadapa Kadapa Dupalagattu 27.00 250.00 1 Cum 376.80 626.80

17 Annamayya Proddatur Neelapuram 27.00 250.00 1 Cum 376.80 626.80

18 Kurnool Kurnool Loddipalli 30.00 250.00 1 Cum 420.00 670.00

19 Nandyal Nandyal Gajulapalle 25.00 250.00 1 Cum 348.00 598.00

Madhavara 420.00
20 Adoni 30.00 250.00 1 Cum 670.00
m
 Krishnaredd 0.00
21 Anantapur Anantapur 1 Cum 0.00
y palle
22 Sri Satyasai District Tadipatri Alurukona 24.00 250.00 1 Cum 333.60 583.60

23 Guntakal Kalvakatta 61.00 250.00 1 Cum 792.00 1042.00

24 Hindupuram Konapuram 61.00 250.00 1 Cum 792.00 1042.00

25 Dhramavaram Mamillapalle 27.00 250.00 1 Cum 376.80 626.80

South Zone - 2 27.00 250.00

26 Ongole Errajerla 30.00 250.00 1 Cum 420.00 670.00

Prakasam
1 Ongole Errajerla 25.00 250.00 1 Cum 348.00 598.00

27 SPS Nellore Nellore Dantaluru 61.00 250.00 1 Cum 792.00 1042.00

28 Kavali Musunuru 61.00 250.00 1 Cum 792.00 1042.00

29 Chittoor Chittoor Putalapattu 27.00 250.00 1 Cum 376.80 626.80

Chowdavar 540.00
30 Srikalahasti 40.00 250.00 1 Cum 790.00
am
Srivari 420.00
31 Sri. Balaji Dist Tirupati 30.00 250.00 1 Cum 670.00
mettu
Madanapall 348.00
32 Madanapalle 25.00 250.00 1 Cum 598.00
e
28250.00
average cost 882.8125
 SOR: 2022-2023 7/15/2022

( No loading and unloading charges allowed for machinery loading and unloading )

(Lead)
charges
for trucks (Lead)
(Lead)
(Lead) and charges for
charges for
charges for trucks and (Lead)
trucks and tippers for (Lead)
trucks and
tippers for Cement/ tippers per charges for charges for
tippers for cu.meter for trucks and
Rubble/Size Steel/ trucks and
Sl No. Distance Earth / PCC slabs/ tippers per
stones/ Cut RCC Shahabad cu.meter for tippers for
Sand /Gravel
/ Murrum/ Stones/ poles/ AC slabs/ CC & water/ 1000 Bricks
Coarse & GI /1000 nos
Lime/ Surki/ Laterite litres
aggregate sheets/
per cu.meter blocks/
per cu.meter Packed
Wood/ cum
materials/
tonne

1 2 3 4 5 6 7 8
1 Lead up to 1 km 1 36.00 34.70 21.70 51.00 21.90 57.80
2 Lead up to 2 km 2 50.40 48.50 30.30 71.40 30.70 80.90
67.20 64.70 40.40 95.20 40.90 107.80
3 Lead up to 3 km 3
4 Lead up to 4 km 4 81.60 78.60 49.10 115.60 49.70 131.00
5 Lead up to 5 km 5 96.00 92.40 57.80 135.90 58.40 154.10
6 for Every km beyond 5 km up to 30 km 30 14.40 13.90 8.70 20.40 8.80 23.10
7 for Every km beyond 30 km 10000 12.00 11.60 7.20 17.00 7.30 19.30

C. LOADING AND UNLOADING CHARGES BY MANUAL MEANS ( idle

hire charges of trucks are not added)
 Rubble/ size
Earth / stone/ cut
Sand /Gravel stone/
Cement in Steel in Bricks
Sl No. Description of item Murrum/ / Coarse
Rs/Tonne Rs/Tonne Rs/1000 Nos.
Surki/ Rs / aggregate,
cum Lime in
Rs/cum

8 Loading 24.90 49.80 82.10 98.50 68.50

9 Unloading 12.45 24.90 82.10 98.50 68.50

D. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (including idle hire

charges of trucks)

Rubble/ size
Earth / stone/ cut
Sand /Gravel stone/
cement in steel in Bricks
Sl No. Description of item Murrum/ / Coarse
Rs/tonne Rs./tonne Rs/1000 Nos.
Surki/ Rs / aggregate,
cum Lime in
Rs/cum

10 Loading 129.90 154.80 197.70 214.00 259.10

11 Unloading 47.30 77.40 197.70 214.00 259.10

E.LOADING AND UNLOADING CHARGES BY MECHANICAL MEANS (including idle hire

charges of trucks)

Rubble/ size
Earth / stone/ cut
Sand /Gravel stone/
Sl No. Description of item Murrum/ / Coarse
Surki/ Rs / aggregate,
cum Lime in
Rs/cum

12 Loading 57.70 114.90

13 Unloading 18.20 18.20

 A. (LEAD) CONVEYANCE CHARGES FOR MATERIALS BY
HEAD LOAD FOR THE YEAR:

Earth / Cement / PCC slab/

Sand /Gravel Reinforce- Shahbad
/ Murrum/ ment steel Str slab / CC
Lime/ Surki/ steel block/ BS
Size stone / Rs / tonne slab/ Late-
Cut stone rite /
Rubble / Wood Rs /
Total distance Coarse cum
( Total lead includes initial lead )
Total lead up to 50 m
(covered by item rate) initial lead initial lead initial lead
14 Total lead up to 100 m 75 43.8 95.5
15 Total lead up to 150 m 150 87.5 190.9
 WS & SA SoR 2015-16 Page-10

COMMON SoR 2022-2023

Now approved are exclusive of taxes (i.e., VAT, Excise duty & GST). 15-7-7-22

WATER SUPPLY AND SANITARY ITEMS

Sl. SoR
CFMS CODE ITEM Item code Rate Labour Unit
No. Page No.

Supply, laying, jointing 101.60 mm dia

SWG pipe
MAT-01667 360 a) up to 1524mm (5') depth 156 BMW-A.01 419.00 1
MAT-01668 361 b) up to 914.40mm (3') depth 156 BMW-A.02 417.00 1
Supply, laying, jointing 152.40mm dia
SWG pipe
MAT-01669 362 a) up to 1524mm (5') depth 156 BMW-A.03 620.00 1
MAT-01670 363 b) up to 914.40mm (3') depth 156 BMW-A.04 609.00 1
Labour charges for laying , jointing ,
LAB-00411 364 testing SWG pipes up to 914.40mm (3') 156 BMW-A.05 260.00 1
depth
Labour charges for laying , jointing ,
LAB-00412 365 testing SWG pipes up to 1524mm (5') 156 BMW-A.06 323.00 1
depth

MAT-01677 366 Supply of 203.20mm (8") dia SWG pipe 157 BMW-A.17 448.00 1

MAT-01678 367 Supply of 254mm (10") dia SWG pipe 157 BMW-A.18 821.00 1
MAT-01679 368 Supply of 300mm (12") dia SWG pipe 157 BMW-A.19 1183.00 1
MAT-01732 369 150mm x 100mm SWG gully trap 159 BMW-A.72 533.00 1

Inspection chamber 3' dia and upto 3'

MAT-05235 370
depth
160 BMW-B.03 6118.00 1
Inspection chamber 3' dia - 3' above
MAT-05236 371
upto 5' depth
160 BMW-B.04 9557.00 1

Inspection chamber 457.2mm x

MAT-01738 372 457.2mm in brick masonry up to 161 BMW-B.06 3590.00 1
914.4mm ( 3) depth

MAT-01775,
373 75 mm (3") CI Nahany trap 1st quality 164 BMW-C.41,42 302.00 57.00 1
LAB-00163

MAT-01783,
374 Orissa pan 580mmx440mm - ISI marked 175 BMW-D.04,06 1551.00 428.00 1
LAB-00165
MAT-01786 375 Brick masonry seat 176 BMW-D.09 303.00 1
MAT-01787 376 C.C Squatting plate 176 BMW-D.10 90.00 1
MAT-01790,
377 S&F EWC with'S' trap 165 BMW-D.14,15 1889.00 300.00 1
LAB-00168
MAT-01791,
378 S&F Plastic seat and lid for EWC 165 BMW-D.16,17 850.00 87.00 1
LAB-00169
MAT-01798, Flat back Wash hand basin 1st quality
379 166, 167 BMW-D.24,28 1736.00 362.00 1
LAB-00170 550mmx400mm-single CP Pillar cock

MAT-01804, S&F flat back bowl urinal 440 x 265 x

380 167 BMW-D.33,36 898.00 144.00 1
LAB-00173 315
MAT-01806, S&F flat back bowl urinal 590 x 375 x
381 167 BMW-D.35,36 2935.00 144.00 1
LAB-00173 390
 WS & SA SoR 2015-16 Page-11

Sl. SoR
CFMS CODE ITEM Item code Rate Labour Unit
No. Page No.

MAT-01807, S & F vitreous china porcelain sink (600

382 167 BMW-D.37,39 4789.00 362.00 1
LAB-00174 x 400 x 250)
MAT-01808, S & F vitreous china porcelain sink (750
383 167 BMW-D.38,39 5371.00 362.00 1
LAB-00174 x 450 x 250)
MAT-01809,
384 S&F RCC terrazo sink 167 BMW-D.40,41 781.00 256.00 1
LAB-00175
 WS & SA SoR 2015-16 Page-12

Sl. SoR
CFMS CODE ITEM Item code Rate Labour Unit
No. Page No.

MAT-01812,
385 Angle stop cock 12.70mm heavy duty 168 BMW-E.05,06 453.00 49.00 1
LAB-00178
MAT-01813,
386 12.70mm NP bib tap heavy duty 168 BMW-E.07,08 387.00 33.00 1
LAB-00179
MAT-01814,
387 12.70mm NP bib tap 3 heavy duty 168 BMW-E.09,10 248.00 33.00 1
LAB-00180
MAT-01815,
388 S&F 31.75mm brass plumber union 168 BMW-E.11,12 68.00 16.00 1
LAB-00181

MAT-01826 389 12.7mm dia. NP push cock 169 BMW-E.29 259.00 1

GM peet valves
MAT-01847,
390 a) 15mm NB 170 BMW-F.21,22 604.00 50.00 1
LAB-00197
MAT-01846,
391 b) 20mm NB 170 BMW-F.19,20 812.00 50.00 1
LAB-00196
MAT-01845,
392 c) 25mm NB 170 BMW-F.17,18 1165.00 50.00 1
LAB-00195
MAT-01848,
393 d) 32mm NB 170 BMW-F.23,24 1768.00 43.00 1
LAB-00198
MAT-01849,
394 e) 40mm NB 170 BMW-F.25,26 2389.00 75.00 1
LAB-00199
MAT-01850,
395 f) 50mm NB 170 BMW-F.27,28 3498.00 101.00 1
LAB-00200
MAT-01851,
396 g) 65mm NB 170 BMW-F.29,30 5398.00 5459.00 1
LAB-00201
MAT-01852,
397 h) 80mm NB 170 BMW-F.31,32 7995.00 149.00 1
LAB-00202
S& F Nominal Bore GI pipe Medium
Grade properties & weight
MAT-05243,
398 a) 15mm Nominal bore 172 BMW-F.79,80 199.00 46.00 1
LAB-00233
MAT-05244,
399 b) 20mm Nominal bore 172 BMW-F.81,82 220.00 46.00 1
LAB-00235
MAT-05245,
400 c) 25mm Nominal bore 172, 173 BMW-F.83,84 286.00 46.00 1
LAB-00237
MAT-05246,
401 d) 32mm Nominal bore 173 BMW-F.85,86 398.00 46.00 1
LAB-00239
MAT-05247,
402 e) 40mm Nominal bore 173 BMW-F.87,88 444.00 50.00 1
LAB-00241
MAT-05248,
403 f) 50mm Nominal bore 173 BMW-F.89,90 48.00 76.00 1
LAB-00243
65mm Tata or Zenith make or
MAT-01870 404
equivalent.
184 BMW-F.91 837.00 1

MAT-01875, S & F 12.70 x 152.00 mm NP shower BMW-

405 173 179.00 22.00 1
LAB-00248 rose heavy F.100,101

MAT-01889, Polyetheylene water storage tank with

406 174 BMW-G.01,02 8.50 1.00 1
LAB-00258 Double layer
 WS & SA SoR 2015-16 Page-13

Sl. SoR
CFMS CODE ITEM Item code Rate Labour Unit
No. Page No.

31.75mm dia. PVC flexible waste pipe,

MAT-01892 407
914.4mm length
175 BMW-G.05 24.00 1

Supply & fixing of PVC low level system

408
with internal components & short bend

MAT-01895 409 a) 10ltrs capacity single flush 175 BMW-G.08 1390.00 1

MAT-01897 410 b) 8 lts capacity single flush 175 BMW-G.10 786.00 1
Double socket PVC/SWR pipes 4
kgs/sqm
MAT-01898 411 a) 75mm dia. 175 BMW-G.11 236.00 3
MAT-01899 412 b) 90mm dia. 175 BMW-G.12 375.00 3
MAT-01900 413 c) 110mm dia. 175 BMW-G.13 447.00 3
MAT-01919 414 d) 160mm dia. 176 BMW-G.32 1066.00 3
Pipe clip
BMWG.
415 a) 75mm dia. 178 BMW-G.104 15.00 1
104
MAT-01992 416 b) 90mm dia. 178 BMW-G.105 16.00 1
MAT-01993 417 c) 110mm dia. 178 BMW-G.106 17.00 1
MAT-01994 418 d) 160mm dia. 178 BMW-G.107 33.00 1
3" (76.2mm) Nahany multi floor trap with
MAT-02005 419
jali
179 BMW-G.118 93.00 1

MAT-02006 420 4" (101.6mm) multi floor trap with jali 179 BMW-G.119 133.00 1
Labour charges for laying, fixing and
LAB-00259 421
commissioning the PVC pipes
180 BMW-G.152 79.00 1

Chiselling the brick masonry wall and

MAT-02151 422
repairs as directed by the department
184 BMW-I.07 34.00 1

MAT-02158,
423 Cost of NP chain and rubber plug 185 BMW-I.18,19 41.00 7.00 1
LAB-00266
MAT-02159, 25.4mm dia & 609.6mm long aluminium
424 185 BMW-I.20,21 162.00 50.00 1
LAB-00267 anodized towel rod
MAT-02163, S & F NP soap dish heavy type with NP
425 185 BMW-I.28,29 231.00 14.00 1
LAB-00271 screws
MAT-02171,
426 Teak wood blocks 76.2mm x 101.6mm 185 BMW-I.42,43 25.00 11.00 1
LAB-00277
Cutting holes in brick masonry &
LAB-00280 427
repaires labour charges
185 BMW-I.46 54.00 1

Cutting holes in RCC slab floor & repairs

LAB-00281 428
labour charges only
186 BMW- I.47 81.00 1

MAT-02172, 12.70mm PVC connection with brass

429 186 BMW-I.48,49 95.00 19.00 1
LAB-00282 union nut CP coated
Constructing Brick masonry support for
MAT-02180, G.I pipe with CM 304.8x228.6x 228.6
430 186 BMW-I.63,64 76.00 25.00 1
LAB-00290 mm size including plastering finishing etc
complete
MAT-02181, Supplying & fixing 304.8 x 228.6 mm CI
431 186 BMW-I.65,66 122.00 40.00 1
LAB-00291 frame and cover for gully traps
MAT-02206, S&F TV shap mirror with plastic frame
432 187 BMW-I.105,106 502.00 132.00 1
LAB-00306 size 609.60mm x 457.20mm
 WS & SA SoR 2015-16 Page-14

Sl. SoR
CFMS CODE ITEM Item code Rate Labour Unit
No. Page No.

Supplying & fixing stainless steel sink

MAT-02213,
433 size 36" x 18" (914.4x457.2mm) 1 mm 188 BMW-I.119,120 7175.00 574.00 1
LAB-00313 thick with accessories
Supplying & fixing stainless steel sink
MAT-02215, size 20" x 18" x 8"
434 188 BMW-I.123,124 5142.00 509.00 1
MAT-02216 (508x457.2x203.20mm) 1 mm thick with
accessories

Supplying & fixing white glazed porcelain

MAT-02217 435
channel 4" x 24" (101.6 x 609.6mm)
188 BMW-I.125 522.00 1

Supplying & fixing steel surgical long

MAT-02218 436 elbow action handle 12.7mm dia bib 188 BMW-I.126 946.00 1
cock
Chrome plated bib cock cum health
MAT-02233 437
faucet jaquar make queen series
189 BMW-I.141 4166.00 1

CPVC Pipes
MAT-02312 438 15.90mm OD pipe - SDR 13.5 195 BMW-I.220 59.00 1
MAT-02313 439 22.20mm OD pipe - SDR 13.5 195 BMW-I.221 94.00 1
MAT-02314 440 28.60mm OD pipe - SDR 13.5 195 BMW-I.222 136.00 1
MAT-02315 441 34.90mm OD pipe - SDR 13.5 195 BMW-I.223 214.00 1
MAT-02316 442 41.30mm OD pipe - SDR 13.5 195 BMW-I.224 295.00 1
MAT-02317 443 54.00mm OD pipe - SDR 13.5 195 BMW-I.225 485.00 1
MAT-02318 444 15.90mm OD pipe - SDR 11 195 BMW-I.226 68.00 1
MAT-02319 445 22.20mm OD pipe - SDR 11 195 BMW-I.227 103.00 1
MAT-02320 446 28.60mm OD pipe - SDR 11 195 BMW-I.228 160.00 1
MAT-02321 447 34.90mm OD pipe - SDR 11 195 BMW-I.229 254.00 1
MAT-02322 448 41.30mm OD pipe - SDR 11 195 BMW-I.230 348.00 1
MAT-02323 449 54.00mm OD pipe - SDR 11 195 BMW-I.231 535.00 1
Buildings SoR
Polished Marble slabs16mm to 20mm
MAT-00781 450
thick marble slab
13 BMT-B.14 1070.00 1

NON SSR ITEMS

451 RCC cover for gully trap 132.00 1

Newly Added item

Part -IV Table
MAT-07652
452 110 mm Dia 6 Kgs/cm2 81 No. 20 & Item 339.00 43.00 1
LAB-00606 no 12.b
Part -IV Table
MAT-07650
453 75 mm Dia 6 Kgs/cm2 81 No. 20 & Item 162.00 43.00 1
LAB-00606 no 12.b
Part -IV Table
MAT-07648
454 50 mm Dia 6 Kgs/cm2 81 No. 20 & Item 74.00 43.00 1
LAB-00606 no 12.b
Part -IV Table
MAT-07665
455 25 mm Dia 10 Kgs/cm2 81 No. 20 & Item 35.00 39.00 1
LAB-00609 no.50 mm

MAT-02496 456 25mm PPR Ball Valve 203 BMW-I.404 215.00 1

 WS & SA SoR 2015-16 Page-15

Sl. SoR
CFMS CODE ITEM Item code Rate Labour Unit
No. Page No.

MAT-02499 457 50mm PPR Ball Valve 203 BMW-I.407 540.00 1

MAT-02501 458 75mm PPR Ball Valve 203 BMW-I.409 1437.00 1
Gunmetal (GM) Ball valve with SS Ball
and SS Spindle
MAT-01864,
459 a) 15mm NB 171 BMW-F.55,56 456.00 61.00 1
LAB-00214
MAT-01865,
460 b) 20mm NB 171 BMW-F.57,58 592.00 61.00 1
LAB-00215
MAT-01866,
461 c) 25mm NB 171 BMW-F.59,60 864.00 61.00 1
LAB-00216
CPVC Pipes
MAT-02321 462 34.90mm ODPipe - SDR 11 195 BMW-I.229 254.00 1
MAT-02322 463 41.30mm ODPipe - SDR 11 195 BMW-I.230 348.00 1
MAT-02323 464 54mm ODPipe - SDR 11 195 BMW-I.231 535.00 1
 WS & SA SoR 2015-16 Page-16

COMMON SoR 2022-2023

sive of taxes (i.e., VAT, Excise duty & GST). 15-7-7-22

R SUPPLY AND SANITARY ITEMS

Unit

RM
RM

RM
RM

RM

RM

RM

RM
RM
Each

Each

Each

Each

Each

Each

Each
Each

Each

Each

Each

Each

Each
WS & SA SoR 2015-16 Page-17

Unit

Each

Each

Each
WS & SA SoR 2015-16 Page-18

Unit

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

RM

RM

RM

RM

RM

RM

RM

Each

Lt
WS & SA SoR 2015-16 Page-19

Unit

Each

Each
Each

RM
RM
RM
RM

Each

Each
Each
Each

Each

Each

RM

RM

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each
WS & SA SoR 2015-16 Page-20

Unit

Each

Each

Each

Each

Each

RM
RM
RM
RM
RM
RM
RM
RM
RM
RM
RM
RM

sqm

Each

RM

RM

RM

RM

each
WS & SA SoR 2015-16 Page-21

Unit

each
each

Each

Each

Each

RM
RM
RM
 WS & SA SoR 2015-16 Page-10

COMMON SoR 2022-2023

Now approved are exclusive of taxes (i.e., VAT, Excise dut

ELECTRICAL AND
ELECTRO-MECHANICAL W
SoR
Sl. CFMS
ITEM Page Item code
No. CODE
No.

Supply and Transportation of XLPE/PVC insulated & PVC

466 MAT-03496 68 ELEC-4.1.6.k
sheathed armoured cables 4C x 4 sq.mm

Supply and Transportation of XLPE/PVC insulated & PVC

465 MAT- 03497 68 ELEC-4.1.6.I
sheathed armoured cables 4C x 6 sq.mm

SWAGED / OCTAGONAL POLES AND GARDEN POSTS

Fabrication, supply and transportation of all sizes

swaged poles up to site confirming to IS 2713 / 1980
MAT- specifications. The pole should be painted with
467 106 ELEC-6.1.1
03928 primary coat of red oxide and black bituminous paint
up to ground level with base plate, including cost of all
materials etc., complete.(Rate per K. G)
Fabrication and Supply of M.S. Poles for garden posts
with 'B' class 60.25mm outer dia with base plate and
MAT-
468 suitable pole cap including cost and conveyance of all 106 ELEC-6.1.2
03929
material including fixing of luminaire and labour
charges etc., complete. (Rate per K. G)

MAT- Supply of different sizes of M. S. Pipe brackets (Rate

469 106 ELEC-6.1.3
03930 per K.G)
Galvanized Octogonal Pole
MAT- Fabrication, Transportation and supply of hot-dip galvanized
470 136 ELEC-6.1.4
03931 Octogonal Pole for 7.5 Mtrs height
MAT- Fabrication, Transportation and supply of hot-dip galvanized
471 137 ELEC-6.1.5
03932 Octogonal Pole for 9 Mtrs height
MAT- Fabrication, Transportation and supply of hot-dip galvanized
472 137 ELEC-6.1.6
03933 Octogonal Pole for 10 Mtrs height
MAT- Fabrication, Transportation and supply of hot-dip galvanized
473 137 ELEC-6.1.7
03934 Octogonal Pole for 12 Mtrs height
POLE BRACKETS
Fabrication, Transportation and supply of 1.0 Mtr Length
MAT-
474 Single Arm Bracket made with MS galvanized 139 ELEC-6.1.11
03938
40mm / 50mm dia Pipe.
Fabrication, Transportation and supply of 1.5 Mtr Length
MAT-
475 Single Arm Bracket made with MS galvanized 303 ELEC-6.1.12
03939
40mm / 50mm dia Pipe.
Fabrication, Transportation and supply of 1.0 Mtr Length
MAT-
476 Double Arm Bracket made with MS galvanized 303 ELEC-6.1.13
03940
40mm / 50mm dia Pipe.
Fabrication, Transportation and supply of 1.5 Mtr Length
477 Double Arm Bracket made with MS galvanized 303 ELEC-6.1.14
40mm / 50mm dia Pipe.
 WS & SA SoR 2015-16 Page-11

SoR
Sl. CFMS
ITEM Page Item code
No. CODE
No.

Foundation and erection charges with special T&P, for

7.50 Mtrs long Octagonal /Conical pole duly erecting
on base plate duly providing 4 Nos foundation bolts
with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20
MAT- Mtr size M20 cc work vibrated concreting mixing with
478 308 ELEC-6.1.31
03961 necessary steel (10kgs) reinforcement and curing for 7
days as directed by the field engineers during
execution including excavation of Earth/BT all labour
charges and cost and conveyance of materials
etc.complete.

Foundation and erection charges with special T&P, for

9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly
erecting on base plate duly providing 4 Nos foundation
bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x
MAT- 1.40 Mtr size M20 cc work vibrated concreting mixing
479 308 ELEC-6.1.32
03962 with necessary steel (15kgs) reinforcement and curing
for 7 days as directed by the field engineers during
execution including excavation of Earth/BT all labour
charges and
cost and conveyance of materials etc.complete

HIGH MAST POLES

Fabrication, transportation and supply of 12 Mtrs
Polygon High Mast with single section of 3mm thick of
Bottom 360mm and Top 150mm dia with BSEN -
MAT-
480 10025 grade S 355 JO steel plate for shaft, IS 2062 for 305 ELEC-6.1.21
03948
base plate, having a base plate of size 520mm dia
16mm thick with its accessories. Mast shall be in single
section for 12 Mtrs

Earth work exacavation with a approximate quantity of

4.0 Cum for errection of 12 Mtrs high mast and refilling
with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M
MAT- 20 grade concrete and (80 Kgs) reinforced steel of
481 307 ELEC-6.1.26
03953 12mm / 10mm / 8mm, Soil bearing capacity of 10
T/Sqm, Anchor plate with cost and conveyance of all
above materials including labour charges for errection
of High Mast and Carraige etc complete.
FEEDER PILLAR BOXES
Supply and fixing of suitable out door type feeder piller box
made with 14 SWG CRCA sheet after 7 tank process
including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel,
MAT-
482 bus bars, 6 Sqmm 3 core copper cable for internal wiring, 306 ELEC-6.1.24
03951
contactor, connectors and provision for energy
meter etc., complete for finished item of work..
FP MCBmake :Legrand / Schnieder / L&T
 WS & SA SoR 2015-16 Page-12

SoR
Sl. CFMS
ITEM Page Item code
No. CODE
No.

Supply Installation Testing and commissioning of free

standing floor mounted dust and vermin proof
compartmentalised cubical panel made out of CRCA
sheet, required hardware, duly painted by two coats of
zinc/red oxide primer followed by Powder coated /
epoxy / PU painted with phosphatisation in grey or
required shade after rinsing. The panel having
PU/Neoprene rubber gasket of not less than 3mm
thickness,separate detachable, gland plate M.S. base
MAT-
483 channel, hinged door with locking arrangement for 310 ELEC-6.2.1
03976
equipment/switchgear. Thickness of sheet shall not be
less than 1.6mm up to 600mm length/width of any
compartment and be of 2.0mm above 600mm. Load
bearing structure shall be of 2.0mm thick sheet
supported by base M.S. channel if required. Side walls
and cable alley compartments having bolted type
doors with detachable extension type structure (only
outer area on all sides shall be measured and panel to
be abricated from CPRI approved fabricator).

GRP POLES
Supply and transportation of following glass reinforced
polymer (GRP) composite
type Conical pole with single arm bracket of length 1Mtr and
internal junction box
including labour charges etc., complete.

3.00 Mtrs height, Bottom dia 143mm, Top

MAT-
484 76mm, AV thickness 6mm and to withstand maximum 114 ELEC-6.1.34
03964
wind velocity 180Km/Hr
4.00 Mtrs height, Bottom dia 143mm, Top
MAT-
485 76mm, AV thickness 6mm and to withstand maximum 114
03965
wind velocity 180Km/Hr
6.00 Mtrs height, Bottom dia 143mm, Top
MAT-
486 76mm, AV thickness 6mm and to withstand maximum 114
03966
wind velocity 180Km/Hr
base bracket suitable for glass reinforced
polymer GRP)
Supply and transportation of base bracket suitable for glass
reinforced
polymer (GRP) composite type pole including labour charges
487
etc.,
complete.including labour charges etc., complete.
Makes: Bajaj / Kemrock / Valmont/Sumip / Helipole
MAT-
488 For 3.00 Mtrs Pole 114 ELEC-6.1.35
03970
MAT-
489 For 4.00 Mtrs Pole 115 ELEC-6.1.35
03971
MAT-
490 For 6.00 Mtrs Pole 115 ELEC-6.1.35
03972
LED STREET LIGHTS
MAT-
491 Supply and transportation of 20 W. LED Street light 256 ELEC-3.8.23
03360

MAT-
492 Supply and transportation of 30 W. LED Street light 256 ELEC-3.8.23
03361
 WS & SA SoR 2015-16 Page-13

SoR
Sl. CFMS
ITEM Page Item code
No. CODE
No.

MAT-
493 Supply and transportation of 45 W. LED Street light 256 ELEC-3.8.23
03362

MAT-
494 Supply and transportation of 60 W. LED Street light 256 ELEC-3.8.23
03363

495 MAT-03364 Supply and transportation of 90 W. LED Street light 257 ELEC-3.8.24

496 MAT-03365 Supply and transportation of 120 W. LED Street light 257 ELEC-3.8.24

497 MAT-03366 Supply and transportation of 150 W. LED Street light 257 ELEC-3.8.24

498 MAT-03367 Supply and transportation of 180 W. LED Street light 257 ELEC-3.8.24

499 MAT-03368 Supply and transportation of 210 W. LED Street light 257 ELEC-3.8.24

500 MAT-03369 Supply and transportation of 20 W. LED Street light 256 ELEC-3.8.25

501 MAT-03370 Supply and transportation of 30 W. LED Street light 256 ELEC-3.8.25

502 MAT-03371 Supply and transportation of 45 W. LED Street light 256 ELEC-3.8.25

503 MAT-03372 Supply and transportation of 60 W. LED Street light 256 ELEC-3.8.25

504 MAT-03373 Supply and transportation of 90 W. LED Street light 257 ELEC-3.8.25

505 MAT-03374 Supply and transportation of 120 W. LED Street light 257 ELEC-3.8.25

506 MAT-03375 Supply and transportation of 150 W. LED Street light 257 ELEC-3.8.25

507 MAT-03376 Supply and transportation of 180 W. LED Street light 257 ELEC-3.8.25

508 MAT-03377 Supply and transportation of 210 W. LED Street light 257 ELEC-3.8.25

FLOOD LIGHTS

509 MAT-03384 Supply and transportation of 50/60. LED Flood light 259 ELEC-3.8.27

510 MAT-03385 Supply and transportation of 90/100. LED Flood light 259 ELEC-3.8.27

511 MAT-03386 Supply and transportation of 120 LED Flood light 259 ELEC-3.8.27

512 MAT-03387 Supply and transportation of 150. LED Flood light 259 ELEC-3.8.27

513 MAT-03388 Supply and transportation of 200. LED Flood light 259 ELEC-3.8.27
 WS & SA SoR 2015-16 Page-14

SoR
Sl. CFMS
ITEM Page Item code
No. CODE
No.
112
SHEATHED FLEXIBLE COPPER CABLES
Supply of Single Core 25 Sqmm PVC insulated and
514 MAT-05466 sheathed FRLS copper round cable for voltage up to 1100V 218 ELEC-1.5.4
as per IS 694/1990.
Supply of Single Core 35 Sqmm PVC insulated and
515 MAT-05467 sheathed FRLS copper round cable for voltage up to 1100V 218 ELEC-1.5.4
as per IS 694/1990.
Supply of Single Core 50 Sqmm PVC insulated and
516 MAT-05468 sheathed FRLS copper round cable for voltage up to 1100V 218 ELEC-1.5.4
as per IS 694/1990.
Supply of Single Core 70 Sqmm PVC insulated and
517 MAT-05469 sheathed FRLS copper round cable for voltage up to 1100V 218 ELEC-1.5.4
as per IS 694/1990.

Supply of 2 core 1.5 Sqmm PVC insulated and sheathed

MAT-
518 FRLS copper round cable for voltage up to 1100V as per IS 218 ELEC-1.5.4
02769
694/1990.
Supply of 2 core 2.5 Sqmm PVC insulated and sheathed
MAT-
519 FRLS copper round cable for voltage up to 1100V as per IS 218 ELEC-1.5.4
02770
694/1990.
Supply of 3 core 1.5 Sqmm PVC insulated and sheathed
MAT-
520 FRLS copper round cable for voltage up to 1100V as per IS 218 ELEC-1.5.4
02772
694/1990.
Supply of 3 core 2.5 Sqmm PVC insulated and sheathed
MAT-
521 FRLS copper round cable for voltage up to 1100V as per IS 218 ELEC-1.5.4
02773
694/1990.
Supply of 3 core 4 Sqmm PVC insulated and sheathed FRLS
MAT-
522 copper round cable for voltage up to 1100V as per IS 218 ELEC-1.5.4
02774
694/1990.
Supply of 4 core 2.5 Sqmm PVC insulated and sheathed
MAT-
523 FRLS copper round cable for voltage up to 1100V as per IS 218 ELEC-1.5.4
02776
694/1990.
Supply of 4 core 4.0 Sqmm PVC insulated and sheathed
MAT-
524 FRLS copper round cable for voltage up to 1100V as per IS 218 ELEC-1.5.4
02777
694/1990.
EARTH CONDUCTORS
Supply and laying of following sizes Earth wire/Strip in
horizontal /Vertical run in Ground/surface/Recess including,
525 332 ELEC-6.7.6
revitting,soldering,saddles,making connection
etc as required 8 SWG Copper wire(0.1155Kgs/1Mtr)
MCBs (AS PER IS:60898-1:2002)

Supply of 6-32A SP MCB 10KA C/D Curve ISI Mark.

MAT-
526 Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens- 234 ELEC-2.10.1
03070
5SX4/ Crabtree- Xpro/L&T-AU/Indo Asian-Opti pro

Supply of 40-63A SP MCB 10KA C/D Curve ISI Mark.

MAT-
527 Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens- 234 ELEC-2.10.1
03073
5SX4/ Crabtree- Xpro/L&T-AU/Indo Asian-Opti pro

Independent earthing
G I pipe 40 mm dia B class Part I-Basic
528 MAT-00036 565
rate Item 35
 WS & SA SoR 2015-16 Page-15

SoR
Sl. CFMS
ITEM Page Item code
No. CODE
No.
MAT- 25mm x 6mm GI Flat (1.18Kgs/1Mtr)
529 565 ELEC-6.7.6 . I
04151
MAT- Drilling of 12mm dia holes [ 4+16=20]
530 565 ELEC-8.4.20
04295
MAT- G.I Nuts, Bolts and Washers
531 565 ELEC-8.4.21
04296
MAT- 450mm x 50 mm (18" dia 2" )thick hume pipe ring
532 565 ELEC-8.4.22
04297
MAT- Hard coke
533 565 ELEC-8.1.10
04232
MAT- Salt
534 565 ELEC-8.1.11
04233
Supply of Automatic Street Light Control System 5 KW
with Optical Micro Sensor, Low volatage / High voltage
MAT- trip and reset, operating voltage 150 - 280V AC per
535 565 ELEC-3.5.2
03258 Phase, 50 HZ with suitable SMC enclousure of IP 54
protection, MCBs and contactor suitable to control the
load of of Three phase load with necessary clamping
thermo plastic cable junction boxes

Supply of 155 X 210 X 92 MM Size thermo plastic cable

junction boxes with IP66/67 weather proof, for outdoor
536 MAT-03956 installation with konckouts for cable entry including terminals 534 ELEC-6.1.29
etc.,

Supply of 205 X 255 X 112 MM Size thermo plastic cable

junction boxes with IP66/67 weather proof, for outdoor
537 MAT-03957 installation with konckouts for cable entry including terminals 534 ELEC-6.1.29
etc.,

Supply and making end termination with heavy Alluminium

538
MAT- lugs up to 16 sqmm (pin/ ring type) as per IS specification
493 ELEC-4.1.13
03560 duly crimped with crimping tool, PVC tape
etc

XLPE/PVC insulated & PVC sheathed unarmoured control

cables
Supply and Transportation of XLPE/PVC insulated & PVC
MAT- sheathed unarmoured control cables of 1.1 KV grade with
539 488 ELEC-4.1.5 b
03466 copper conductor as per IS 7098 Part-I -1988 etc complete 3C
x 1.5 sq.mm
Supply and Transportation of XLPE/PVC insulated & PVC
MAT- sheathed unarmoured control cables of 1.1 KV grade with
540 488 ELEC-4.1.5.L
03477 copper conductor as per IS 7098 Part-I -1988 etc complete 3C
x 2.5 sq.mm

PVC insulated and sheathed FRLS copper round cable

Supply of ……...PVC insulated and sheathed FRLS copper

MAT-
541 round cablefor voltage up to 1100V as per IS 694/1990. 3C x 437 ELEC-1.5.5.m
02783
4 sq.mm
 WS & SA SoR 2015-16 Page-16

SoR
Sl. CFMS
ITEM Page Item code
No. CODE
No.

Supply of ……...PVC insulated and sheathed FRLS copper

MAT-
542 round cablefor voltage up to 1100V as per IS 694/1990. 4C x 437 ELEC-1.5.5.t
05489
6 sq.mm

543

544 MAT-00047 J- Bolts 30 cm long 20 Part-I (46)

 WS & SA SoR 2015-16 Page-17

COMMON SoR 2022-2023

ve of taxes (i.e., VAT, Excise duty & GST). 15-7-7-22

ELECTRICAL AND
ELECTRO-MECHANICAL WORKS

Rate Labour Unit

Make: Torrent / Universal / Unicab / Havells / KEI

288.00 /Polycab/Gloster/Orbit/ Paragon/RR 1 RM
Kabel/RPG/Rhino/Pawancab/LS cable
Make: Torrent / Universal / Unicab / Havells / KEI
412.00 /Polycab/Gloster/Orbit/ Paragon/RR 1 RM
Kabel/RPG/Rhino/Pawancab/LS cable

82.00 1 Kg

74.00 1 Kg

74.00 1 Kg

Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/

13,842.00 1 Each
Skipper/Consoul
Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/
20,009.00 1 Each
Skipper/Consoul
Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/
21,998.00 1 Each
Skipper/Consoul
Makes: Bajaj / Valmont/Laasma//Transrail/Utkarsh/
31,779.00 1 Each
Skipper/Consoul

Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/

1,530.00 1 Each
Skipper/Consoul

Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/

2,024.00 1 Each
Skipper/Consoul

Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/

1,895.00 1 Each
Skipper/Consoul

delete 1 Each
 WS & SA SoR 2015-16 Page-18

Rate Labour Unit

5,821.00 1 job

7,841.00 1 job

Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/

123,585.00 1 Each
Skipper/Consoul

33,739.00 1 Each

21,539.00 FP MCB make :Legrand / Schnieder / L&T 1 Each

 WS & SA SoR 2015-16 Page-19

Rate Labour Unit

5,320.00 1 sqm

Makes: Bajaj / Kemrock / Valmont/Sumip / Helipole

10,005.00 1 Each

12,712.00 1 Each

15,890.00 1 Each

Makes: Bajaj / Kemrock / Valmont/Sumip / Helipole

1,824.00 1 Each

1,824.00 1 Each

2,177.00 1 Each

1,822.00 1 Each
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) /GE-Venture / Crompton(Neo Series) / Bajaj
2,852.00 (Edge) /Halonix(Lumos - Super) / Havells (Endura 1 Each
Series)/Capart(Premium)/Greenlites(Hi-Lux)/Polycab/Kes
elec/HPL(City Vision)/Jaquar (Premium)/Eveready/
Surya (Pollux) / FortuneArrt (Leaf)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/OSRAM / SAMSUNG / LG
 WS & SA SoR 2015-16 Page-20

a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green

line) /GE-Venture / Crompton(Neo Series) / Bajaj
Rate Labour
(Edge) /Halonix(Lumos - Super) / Havells (Endura
Unit
Series)/Capart(Premium)/Greenlites(Hi-Lux)/Polycab/Kes
elec/HPL(City Vision)/Jaquar (Premium)/Eveready/
4,324.00 Surya (Pollux) / FortuneArrt (Leaf) 1 Each
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/OSRAM / SAMSUNG / LG
5,428.00 1 Each

8,464.00 1 Each
a) Luminaire Make : Wipro(Skyline) / Philips (Greenline
10,948.00 Extra) /GE- Venture / Crompton(Nexus / Hawk series) / 1 Each
Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells
(EnduraSeries)/Greenlites(HILux)/Capart
12,650.00 1 Each
(Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar
(Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf)
14,260.00 b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / 1 Each
OSRAM / SAMSUNG / LG.
18,400.00 1 Each

1,702.00 1 Each

2,650.00 1 Each

4,140.00 1 Each
a) LUMINAIRE Makes: Syska / GM / C&S/ VIN/Gold
5,152.00 Medal 1 Each
/Pharox / Cosmo / Enrich/Pro-lite(I) / Renesola /
8,004.00 Stanjo /Goldwyn/ Ib LED/ Orbit/ Luker/Trinic/Rhino / GLO 1 Each
LED/ Vimal
9,660.00 b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG / 1 Each
LG.
11,592.00 1 Each

13,248.00 1 Each

16,146.00 1 Each

5,382.00 1 Each
a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /
9,522.00 Crompton/ Bajaj/Greenlites / Havells/Capart(Premium) 1 Each
/Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya
12,337.00 (Lumasmax / O Flood)/ FortuneArrt (Fin) 1 Each

14,490.00 b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA 1 Each

/OSRAM / SAMSUNG.
17,388.00 1 Each
 WS & SA SoR 2015-16 Page-21

Rate Labour Unit

288.00 1 Rmt

406.00 1 Rmt

576.00 1 Rmt

785.00 1 Rmt

59.00 1 Rmt

Makes: Finolex / RR kabel / Havells /KEI/Polycab/

92.00 Gloster/Goldmedal/GM 1 Rmt

79.00 1 Rmt

131.00 1 Rmt

183.00 1 Rmt

164.00 1 Rmt

249.00 1 Rmt

86.00 1 Rmt

Makes: Legrand-DX3 / Schneider-A9/Hager-h3/

Siemens- 5SX4/ Havells STADx /L&T-AU/Indo Asian-
240.00 Opti pro/ HPL (Techno) 1 Each

506.00 1 Each

1 Rm
248.00
 WS & SA SoR 2015-16 Page-22

Rate Labour Unit

1 Rm
91.00

1 no
8.00

1 set
14.00

1 no
303.00

1 kg
24.00

19.00 1 kg

Make: Swadeep Nature Switch / Light Mate

/GL/Bajaj
16,280.00 1 Each

1,893.00
Make : Hensel/Sadhrish 1 Each

2,754.00
Make : Hensel/Sadhrish 1 Each

12.00
Makes:Dowels/Jainson/Comet 1 Each

Make: Torrent / Universal / Unicab / Havells / KEI

124.00 /Polycab/Gloster /orbit 1 RM
/ Paragon/ RR Kabel/ RPG/ Pawancab/LS cable

Make: Torrent / Universal / Unicab / Havells / KEI

150.00 /Polycab/Gloster /orbit 1 RM
/ Paragon/ RR Kabel/ RPG

Make: Torrent / Universal / Unicab / Havells / KEI

157.00 1 RM
/Polycab/Gloster /orbit / Paragon/ RR Kabel/ RPG
 WS & SA SoR 2015-16 Page-23

Rate Labour Unit

Makes: V-Guard/Bonton /Finecab/ HPL / Million /

FortuneArt /Sudhakar/Orbit/ Tamra/Anchor /Plaza/
340.00 1 RM
Vihan/Spykaar/ Ollvin/Laser/Beljin/Rhino/ Standard/
Vimal

45.00 1 Each
 Item Qty Cement

Total ks of Total bags of

Coefficent / cum
cement cement

PCC 30.00 160 4800 96

M25 Concrete 380 0 0
Brick Masonry 115.00 36 4140 82.8
Plastering 20mm Single Coat 226.00 6.048 1366.848 27.33696
Plastering 12mm Single Coat 305.00 4.32 1317.6 26.352
Flooring with Tandur / Shabad 95.00 7.456 708.32 14.1664
Steel 4000
Painting 425.00

Unite rate Amount

Cement 247 300 74100
Sand 47 2000 94000
Aggregate 27 1300 35100
Steel 4000 60 240000
Bricks 58880 6 353280
Flooring with Tandur / Shabad 11 2500 27500
Paint 85 60 5100
829,080.00
300,000.00
174150.00
1,303,230.00

As per BQS
Item Qty Cement

Total ks of Total bags of

Coefficent / cum
cement cement

PCC 86.62 160 13859.2 277.184

M25 Concrete 3775.485 380 1434684.3 28693.686
Brick Masonry 151.03 36 5437.08 108.7416
RR Masonry 79.16 59.4 4702.104 94.04208
Plastering 20mm Single Coat 6.048 0 0
Plastering 20mm two coats 86.62 5.76 498.9312 9.978624
Plastering 12mm Single Coat 36.00 4.32 155.52 3.1104
Plastering 12mm two coats 1261.06 4.08 5145.1248 102.902496
Flooring with Granite 632.51 7.50 4743.825 94.8765
Flooring with Cobblestone 1115.00 30.60 34119 682.38
Flooring with Rough black Kadapa
slabs 39.00 3.12 121.68 2.4336
Flooring with polished Tandur /
Shabad 20.80 7.46 155.168 3.10336
Steel 3270.00
Painting 0.00

Unite rate Amount

Cement 30073 bags 300 9,021,900.00
Sand 1829 2000 3,658,000.00
Aggregate 3476 1300 4,518,800.00
Steel 3270 60 196,200.00
Bricks 77327.36 6 463,964.16
RR Masonry 87.076 6 522.46
Flooring with Tandur / Shabad 6 2500 15,000.00
Paint 0 60 0
17,874,386.62
300,000.00
0.00
18,174,386.62
 Sand Aggregate

Total ks Total ks
Coefficent / Coefficen
of sand in of sand in
cum t / cum
cum cum
0.45 13.5 0.9 27
0.45 0 0.9 0
0.2 23.0 512 58880 36.5
0.021 4.746 0 13.035714286
0.015 4.575 0
0.012 1.14 1.05 1073.31
4000 4000
0.2 85

laber
Unforeseen items door, w, v, wc, etc.,

Sand Aggregate

Total ks Total ks
Coefficent / Coefficen
of sand in of sand in
cum t / cum
cum cum
0.45 38.979 0.9 77.958
0.45 1698.968 0.9 3397.937
0.2 30.206 512 77327.36
0.33 26.1228 1.10 87.076
0.022 0 0
0.022 1.90564 0
0.015 0.54 0
0.015 18.9159 0
0.020 12.6502 1.05 632.51
 0.065 72.475 1.05 1115.00 117,075.00

0.0140 0.546 1.05 40.95

0.0120 0.2496 1.1 22.88

3270 3270
0.2 0

17,874,386.62
laber
Unforeseen items door, w, v, wc, etc.,
18,174,386.62
 GOVERNMENT OF ANDHRA PRADESH
A.P. GREENING AND BEAUTIFICATION CORPORATION, VIJAYAWADA
Rammavarapppadu Ring Road to Gannavaram Airport Project
Dt: 01.07.2022

Approx. Lowest Rate

Sl. Name of the plant Bag size Lowest Rate
Height of Quoted Firm
No Quoted
the plant (Sl. No.)

9 10

A PALM & CYCADS

1 ft clear
1 Bismarckia nobilis 21'' X 21'' 520.00 2
trunk
1 ft clear
2 Cycus revoulta 18'' X 18'' 450.00 5
trunk
3 Dypsis lutescens 18'' X 18'' 5' to 6' 232.00 3
25'' X 25'' 5' to 6' clear
4 Livistona rotundifolia 7650.00 1
trunk
5 Veitchia merrillii Green 18'' X 18'' 3' to 4 ' 300.00 2
6 Wodyetia bifurcata 18'' X 18'' 4' to 5' 390.00 5

B TOPIARY

7 Bougainvillea cones Pots 5' to 6' 7640.00 3

8 Bougainvillea ball 18'' X 18'' 3' 325.00 6
9 Ficus panda ball 18'' X 18'' 2' 225.00 6, 7
10 Ficus blakeana topiary 18'' X 18'' 3' to 4 ' 225.00 6, 7

C TREES

11 Plumeria rubra red 18'' X 18'' 2' to 3' 375.00 7

12 Plumeria obtusa alba 18'' X 18'' 2' to 3' 350.00 7
13 Plumeria acutifolia alba 18'' X 18'' 2' to 3' 412.00 1
14 Plumeria singapore dwarf 18'' X 18'' 2' to 3' 375.00 7
15 Azadirachta indica 18'' X 18'' 5' to 6' 170.00 6
16 Anthocephalus cadamba 18'' X 18'' 5' to 6' 160.00 5
17 Butea monosperma 18'' X 18'' 4' to 5' 170.00 6
18 Millingtonia hortensis 18'' X 18'' 5' to 6' 160.00 5
19 Nyctanthes arbor-tristis 18'' X 18'' 5' to 6' 165.00 7
20 Phyllanthus emblica 18'' X 18'' 5' to 6' 170.00 6
 Dt: 01.07.2022

Approx. Lowest Rate

Sl. Name of the plant Bag size Lowest Rate
Height of Quoted Firm
No Quoted
the plant (Sl. No.)

9 10
21 Pisonia alba 18'' X 18'' 5' to 6' 170.00 6
22 Phyllanthus emblica 18'' X 18'' 5' to 6' 170.00 6
23 Syzygium cumini 18'' X 18'' 5' to 6' 170.00 6
24 Terminalia mantaly 18'' X 18'' 5' to 6' 250.00 6
25 Tabebuia avellanedae 18'' X 18'' 5' to 6' 170.00 6

D SHRUBS

26 Acalypha inferna 7'' x 8'' 1' to 1' 6'' 14.00 6

27 Acalypha green dwarf variegated 7'' x 8'' 1' to 1' 6'' 14.00 6
28 Bougainvillea formosa 7'' x 8'' 1' to 1' 6'' 25.00 5
29 Bougainvillea tamota red 7'' x 8'' 1' to 1' 6'' 25.00 5
30 Bougainvillea subra 7'' x 8'' 1' to 1' 6'' 30.00 5
31 Bougainville torch glow 7'' x 8'' 1' to 1' 6'' 25.00 5
32 Bougainvillea glabra 7'' x 8'' 1' to 1' 6'' 30.00 5
33 Bougainvillea thimma 7'' x 8'' 1' to 1' 6'' 30.00 5
34 Bougainvillea light pink 7'' x 8'' 1' to 1' 6'' 30.00 5
35 Duranta gold 7'' x 8'' 1' to 1' 6'' 14.00 6
36 Euphorbia milii 7'' x 8'' 1' to 1' 6'' 20.00 2, 4, 6
37 Ixora Red dwarf 7'' x 8'' 1' to 1' 6'' 15.00 6
38 Ixora chinensis red 7'' x 8'' 1' to 1' 6'' 15.00 6
39 Ixora chinensis yellow 7'' x 8'' 1' to 1' 6'' 15.00 6
40 Ixora chinensis pink 7'' x 8'' 1' to 1' 6'' 15.00 6
41 Leucophyllum frutescens 7'' x 8'' 1' to 1' 6'' 18.00 2, 4
42 Murayya paniculata 7'' x 8'' 1' to 1' 6'' 17.00 6
43 Plumbago auriculata 7'' x 8'' 1' to 1' 6'' 17.00 6
44 Tabernaemontana variegated 7'' x 8'' 1' to 1' 6'' 18.00 6, 7
45 Tabernaemontana divaricata dwarf 7'' x 8'' 1' to 1' 6'' 18.00 6
46 Yucca 7'' x 8'' 1' to 1' 6'' 20.00 6
 Dt: 01.07.2022

Approx. Lowest Rate

Sl. Name of the plant Bag size Lowest Rate
Height of Quoted Firm
No Quoted
the plant (Sl. No.)

9 10

E GROUND COVERS

4'' X 6''
47 Lantana red 7'' x 8'' 1' to 1' 6'' 15.00 6

48 Lantana sellowiana 7'' x 8'' 1' to 1' 6'' 15.00 6

49 Lantana yellow 7'' x 8'' 1' to 1' 6'' 15.00 6
50 Pandanus gold 7'' x 8'' 1' to 1' 6'' 15.00 6

Wedelia trilobata 4'' X 6'' 6'' to 1' 7.75 7

51
Wedelia trilobata 7'' x 8'' 1' to 1' 6'' 13.00 3

Certify that the following lowest rates are arrived based on the lowest quote quoted by
agencies for plant wise and same are being proposed for adopt in the detailed estimates
for according sanction of estimates pertains in Central medians and Avenue plantation
from Ramavarappadu Ring Road to Gannavaram Airport Project.

Manager (UG) E.C. (Tech), M.D.,

Central Zone APG&BC APG&BC
 GOVERNMENT OF ANDHRA PRADESH
APG&BC – Jagananna Haritha Nagaralu

Comparative Statement for Supply of plant material required for Central medians and Avenue plantation in ULBs

Approx.

Quoted

Quoted

Quoted
Lowest

Lowest
Height
of the
Sl. Bag

No of
Firms
plant

Rate

Rate

Firm
Name of the plant
No size

10 11 12
Central median plants
1 Veitchia merrillii green 18x18 3'-4' 1 300.00 1
2 Veitchia merrillii gold 18x18 3'-3'.6'' 2 900.00 4
3 Mimusops elengi 18x18 5'-6' 4 175.00 1
4 Terminalia mantaly 18x18 5'-6' 4 225.00 1
5 Phoenix roebelenii 18x18 3'-3'.4'' 3 325.00 4
6 Ficus black 18x18 3'-4' 3 230.00 9
7 Dypsis decaryi 18x18 6''-1 feet 2 275.00 4
clear trunk
8 Wodyetia bifurcata 18x18 4'-5' 7 350.00 2
9 Phoenix sylvestris 18x18 6''-1 feet 2 500.00 4
clear trunk
6''-1 feet
10 Bismarckia nobilis 18x18 1 350.00 1
clear trunk
11 Putranjiva roxburghii 18x18 4'-5' 5 140.00 1
12 Plumeria Singaporensis dwarf 18x18 2'.6'' 6 370.00 3
13 Sterculia foetida 18x18 5'-6' 6 160.00 1, 3
14 Ficus panda 18x18 2'-2'6'' 6 180.00 3
15 Tecoma gaudichaudi 18x18 5'-6' 3 150.00 3
6''-1 feet
16 Washingtonia robusta 18x18 3 425.00 9
clear trunk
17 Bignonia megapotamica 18x18 4'-5' 6 150.00 3
18 Cordia sebestena 18x18 4'-5' 6 140.00 3
19 Caryota urens 18x18 5'-6' 5 275.00 4
Avenues 0.00
20 Neolamarckia cadamba 18x18 5'-6' 5 150.00 1
21 Tabebuia rosea 18x18 5'-6' 5 150.00 1
22 Tabebuia avellanedae 18x18 5'-6' 5 160.00 1
23 Spathodea campanulata 18x18 5'-6 5 150.00 1
24 Mimusops elengi 18x18 5'-6' 4 175.00 1
25 Cordia sebestena 18x18 4'.6''-5' 5 175.00 1
 Approx.

Quoted

Quoted

Quoted
Lowest

Lowest
Height
of the
Sl. Name of the plant Bag

No of
Firms
plant

Rate

Rate

Firm
No size

10 11 12
26 Peltophorum pterocarpum 18x18 5'-6' 5 160.00 1
27 Delonix regia 18x18 5'-6' 5 150.00 1
28 Pongamia pinnata 18x18 4'-5' 5 150.00 1
29 Bauhinia blakeana 18x18 4'-5' 5 160.00 1
30 Swietenia mahagoni 18x18 5'-6' 5 145.00 1
31 Millingtonia hortensis 18x18 5'-6' 5 150.00 1
32 Terminalia catappa 18x18 5'-6' 5 150.00 1
33 Hibiscus tiliaceus 18x18 5'-6' 3 150.00 1
Shrubs
34 Lantana sellowiana 7x8 8''-1' 9 12.00 2
35 Bougainvillea glabra 7x8 1'6''-2' 8 30.00 6
36 Bougainvillea formosa 7x8 1'6''-2' 9 15.00 6
37 Allamanda cathartica dwarf 7x8 8''-1' 8 12.00 2
38 Ixora chinensis 7x8 1'6''-2' 9 14.00 2
39 Tabernaemontana divaricata variegated 7x8 1'6''-2' 9 15.00 4
40 Jatropha integerrima 7x8 1'6''-2' 9 15.00 2
41 Tabernaemontana divaricata dwarf 7x8 8''-1' 9 15.00 2
42 Pandanus gold 7x8 6''- 8'' 9 15.00 2
43 Ixora dwarf 7x8 8"-1' 9 14.00 2
44 Lantana camara red & yellow 7x8 8''-1' 8 12.00 2
45 Galphimia glauca 7x8 8''-1' 9 15.00 2
46 Hymenocallis littoralis 7x8 6''-1' 9 11.00 2
47 Euphorbia milii hybrid 7x8 8''-1' 9 15.00 2
48 Plumbago auriculata 7x8 1'6''-2' 9 16.00 2
49 Lagerstroemia indica 7x8 2'-3' 8 25.00 4
50 Tecoma capensis 7x8 8''-1' 9 16.00 2
51 Duranta gold 7x8 8''-1' 9 13.00 2, 3
52 Leucophyllum frutescens 7x8 8''-1' 9 16.00 2
53 Nerium oleander 7x8 8''-1' 9 14.00 2
54 Tabernaemontana divaricata 7x8 1'6''-2' 9 15.00 2
 A.P. Greening & Beautification Corporation
Name of the Work:- Preliminary Estimate for development of landscape
(Softscape & Hardscape) works in Dr.YSR gardens (75.0 Ac.) at polavaram
Project, Andhra Pradesh.
Estimate Cost: Rs.222.00 Crore
Amount
Sl.No Description of Item
(in Rs.)

I Dr. YSR Statue Garden

1 100' tall Dr. YSR Statue bronze- Provisional 400,000,000.00

Site development works such as profiling, retaining structures,
Hardscape works such as columnade of celebration, peripehral view
deck, 9m drive way, mural wall, people's plaza, Amphitheatre, river of
II life, meandering pathway, water cascade and features, glass bridge,
light and sound show, ramp and summit plaza

2 Dr. YSR Statue Garden- terracing -20,285 Sq.m 5,071,250.00

3 Dr,YSR Statue Garden retaining wall -491 r.m 3,928,000.00
III Hardscape works

4 Columns of celebration -60 No's 150,000,000.00

5 Peripherial view deck -2,182 Sq.m 6,262,340.00
6 9m driveway all around -4,050 Sq.m 11,623,500.00
7 Mural wall - 60Rm 12,600,000.00
8 People's plaza -3,390 Sq.m 9,729,300.00
9 Peoples plaza seating -52Sq.m 156,000.00
10 People's plaza stairs - 150Sq.m 430,500.00
11 Amphitheatre - 422Sq.m 2,532,000.00
12 River of Life - 580Sq.m 11,600,000.00
13 Meandering pathway - 240 Sq.m 688,800.00

14 Water cascade and Water feature (along ramp and steps)- 381 Sq.m 7,620,000.00

15 Glass bridge -30 Sq.m 30,000.00

16 Light and Sound show - 377 Sq.m 10,000,000.00
17 Ramp- 396 Sq.m 2,376,000.00
18 Steps - 104 Sq.m 624,000.00
19 Garland gardens water feature - 22 Sq.m 440,000.00
20 Garland gardens - Amphitheatre - 300 Sq.m 1,800,000.00
21 Summit plaza - 909 Sq.m 2,727,000.00
 Interpretation center including museums, cafes, AV system and public
IV amenities such as toilets, ticket counter including internal
electrification, Fire fighting & HVAC

22 Amenity block - 4,005 Sq.m (1 No's) 146,823,300.00

23 Cafe - 235 Sq.m (2 No'S) 11,397,500.00
24 Ticket counter \ cafe - 235 Sq.m (3 No's) 11,397,500.00
V Dr. YSR Hill garden
Dr. YSR Hill garden area: Site development works such as profiling,
retaining structures, such as profiling, retaining structures, and
hardscape works such as oval pathway, circumambulatory water
feature, stairs, ramp

25 Dr.YSR Hill Garden -terracing-22,690 Sq.m 5,672,500.00

26 Dr. YSR Hill garden -retaining Wall -749 r.m 5,992,000.00

Hardscape works

27 Oval Pathway -5,648 sq.m 11,296,000.00

28 Circumambulatory water feature -1,289 Sq.m 992,530.00

29 Stairs -106 Sq.m 636,000.00

30 Ramp -1,140 Sq.m 6,840,000.00

VI Grand Stairs
Grand Stairs: Site development works such as profiling, retaining
structures, and hardscape works such as foundation, super structure,
finishing and features, water features

31 Grand stairs - Terracing -1,950 Sq.m 487,500.00

32 Grand stairs - Retaining wall -260 r.m 2,080,000.00

b Hardscape works

33 Foundation and Superstructure -1,950 Sq.m 19,500,000.00

34 Provision for Finishing and features 10,000,000.00

35 Water feature -180 Sq.m 3,600,000.00

Food court area: Site development works such as profiling, retaining

structures and building such as food court, toilets, restaurants, kitchen
VII and open dining including internal electrification, Fire fighting &
HVAC

36 Food Court -Terracing -5,343 Sq.m 1,335,750.00

37 Food Court -Retaining wall -297 r.m 2,376,000.00

Buildings

38 Foodcourt - 150 Sq.m (1 No's) 8,277,000.00

39 Toilets - 467 Sq.m (2 No'S) 24,657,600.00

40 Restaurants - 810 Sq.m (3 No's) 38,410,200.00

 41 Kitchen - 142 Sq.m (4 No's) 5,347,720.00

42 Open dining - 297 Sq.m (5 No's) 9,997,020.00

Roads, parking, walkways and bioswales
VIII

43 Road Reataining Wall -4,224 r.m 33,792,000.00

44 Road Terracing -22,311 Sq.m 5,577,750.00

45 Roads and parking - 36,836 sq.m 184,180,000.00

46 Walk ways - 4,768 Sq.m 4,052,800.00

47 Bioswales (including culverts etc..) -1,668 sq.m 1,284,360.00

48 Parking Zone Terracing -23,692 Sq.m 5,923,000.00

49 Parking Zone retaining wall - 573 r.m 4,584,000.00

50 Tree court (near parking) -784 Sq.m 627,200.00

Circular plazas (7 nos), admin block, ticket counter and public
IX amenity zone

51 Circles -terracing -8,973 Sq.m 2,243,250.00

52 Circles -retaining wall -7,425 Sq.m 59,400,000.00

53 Admin and Amenity zone - terracing -1,650 Sq.m 412,500.00

54 Admin and Amenity zone -retaining wall -200 r.m 1,600,000.00

X Circle info block & Cable car block

55 Circle info block 2,350 Sq.m 33,229,000.00

56 Cable car block 500 Sq.m (3No's) 26,900,000.00

XI Open Air Theatre & Maidan

57 Open Air Theatre 4,602,000.00

58 Maidan - 5,000 Sq.m 500,000.00

XII Entrance plaza, Ascent Plaza, Double deck plaza and water feature

59 Entrance plaza (West) water feature - 572 Sq.m 11,440,000.00

60 Entrance plaza (East) water feature - 572 Sq.m 11,440,000.00
61 Ascent Plaza - water feature - 572 Sq.m 11,440,000.00
62 Double deck plaza - water feature - 572 Sq.m 11,440,000.00

XIII Recreation zone, children's play zone and yoga pavillion

63 Yoga Pavilion -192.0 Sq.m (2 No's) 6,846,720.00

64 Recreation zone -Terracing -17,179 Sq.m 4,299,250.00

65 Recreation zone -retaining wall -793 r.m 6,344,000.00

66 Children's play zone -3800 Sq.m 7,600,000.00

 Softscape works such as welcome gardens, garden of ghats, gardens of
papikonda, garland gardens Avenue planting, and bio diversity forest
XIV

67 Welcome gardens (Dr. YSR Statue gardens) - 385 Sq.m 385,000.00

68 Garden of Ghats (Dr. YSR Statue gardens) - 427 Sq.m 427,000.00

69 Gardens of Papikonda (Dr. YSR Statue gardens) - 410 Sq.m 410,000.00

70 Garland gardens (Dr. YSR Statue gardens) - 1,026 Sq.m 1,282,500.00

71 Crescent Berm (Dr. YSR Hill garden) - 2,400 Sq.m 1,800,000.00

72 Flower garden (Dr. YSR Hill garden) - 19,093 Sq.m 14,319,750.00

73 Flower gardens of Grand Stairs - 362 Sq.m 271,500.00

74 Softscape for Entrance plaza (West) gardens -710 Sq.m 532,500.00

75 Softscape for Entrance plaza (East) gardens - 710 Sq.m 532,500.00

76 Softscape for Ascent Plaza - gardens - 502 Sq.m 376,500.00

77 Softscape for Double deck plaza - gardens - 502 Sq.m 376,500.00

78 Biodiversity Forest -1,11,988 Sq.m 38,242,400.00

79 Avenue planting and bio diversity forest 183,204,800.00

Hill trail, seating courts, adventure sports, cable car and cliff deck
XV
Hill trail and seat courts- 1,324 Rm
80 714,960.00
Adventure sports -Lumpsum
81 10,000,000.00
Cliff Deck and Cliff walk - 1965 Sq.m
82 19,650,000.00
Adventure play Zone - 7500 Sq.m
83 18,750,000.00
Cable Car Zone - 1,190 Sq.m
84 4,000,780.00
Provisional for external development and Landscape works Lighting
XVI and external Electrical works including decorative lighting. 40,000,000.00

XVII Provisional for MEP and sanitary works 20,000,000.00

Provisional for Signages, street furniture, art works and irrigation
XVIII works

85 Provisional for Signages, 2,000,000.00

86 Provisional for Street Furniture 2,000,000.00

87 Provisional for Artworks 2,000,000.00

 Provision for auto meachine irrigiation system, Bore wells, STP,
XIX Pumps,motors etc.. 18,474,000.00
 Total 1,786,863,330.00
PS contingencies 25,000,000.00
Quality Control @ 0.5% on total 8,934,317.00
Tender premium @ 5% on total 89,343,167.00
Seignorage charges @ 0.6% on total 10,721,180.00

NAC @ 0.1% on total 1,786,863.00

Price adjustment @ 5% on total 89,343,167.00

Structural drawings proof checking 16,000,000.00

Sub total 2,027,992,024.00

Add GST @ 18% on sub total 365,038,564.00

Architect fees @ 3.6% on sub total 73,007,713.00

Add GST @ 18% on Architect fees 13,141,388.00

PDMC charges @ 5% on sub total 101,399,601.00

Unforeseen items 4,420,710.00

Grand total 2,585,000,000.00

#NAME?
 A.P. Greening & Beautification Corporation
Name of the Work:- General abstract estimate for Rejuvenation of Water Body at Akkireddypalem ( 1.23
Acres) in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT 2.0 )

( Estimate prepared as per SOR 22-23) Estimate Cost: Rs.185.00 Lakhs

Amount
Sl.No Description of Item
(in Rs.)

I Hardscape (Civil work)

1 Jungle Clearing and level grading- 2000 Sqm 6,397.50

2 Desilting of Lake - 6300 cum 883,638.00

3 Stone pitching along the bund - 3150 Sqm 3,258,285.04

4 C.C Kerb on both sides 410 Rmt 299,046.70

5 Pathway flooring with 60 mm thick CC pavers - 860 Sqm 856,024.22

6 Construction of see through compound wall - 320 Rmt 5,233,894.93

7 Construction of Planter Seater wall 235 Rmt 1,353,048.75

Sub Total - I 11,890,335.14

II Softscape (Development & one month Maintenance)

8 Shrub planting/ Hedge - 186 Sqm 233,067.58

9 Trees - 142 No.s 190,377.20

10 Floating Plants 792 No.s 277,946.22

Sub Total - II 701,391.00

Total = ( Sub Total - I to Sub Total - II ) 12,591,726.14

11 Provision for transportation of bag plants 50,000.00

12 Provision for Irrigation facilities 250,000.00

13 Provision for Aerators- 2No's 300,000.00

14 Provision for minimum external electrification 300,000.00

15 Add Price adjustment @ 5 % on Total = ( Sub Total - I to Sub Total - II ) 629,586.31

16 Add Tender premium @ 5 % on Total = ( Sub Total - I to Sub Total - II ) 629,586.31

 Amount
Sl.No Description of Item
(in Rs.)

17 Add NAC @ 0.1 % on Total = ( Sub Total - I to Sub Total - II ) + 11 to 16 14,750.90

18 Add Publication Charges @ 1 % on Total = ( Sub Total - I to Sub Total - II ) 125,917.26

Total 14,891,566.92

Add GST @18% on Total 2,680,482.05

Add seigniorage charges @ 1.50 % on Sub Total - I 178,355.03

Add Consultancy & engineering supervision Charges @ 5% on Total 744,578.35

Add unforeseen items 5,017.65

Grand Total 18,500,000.00

 A.P. Greening and Beautification Corporation

Name of the Work :- Detailed estimate for Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra Pradesh.
( AMRUT 2.0 )

( Estimate prepared as per SOR 22-23) Estimate Cost: Rs.185.00 Lakhs

Rate Per Unit Amount

Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

Hardscape (Civil works)

Earth work excavation for foundations (Manual Means) of buildings,
septic tank, sump, compound wall in ordinary soils and depositing on
bank with an initial lead of 10m and depth up to 3m including all
operational, incidental, labour charges such as shoring, sheeting,
1 (BLD-CSTN-2-1)
planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

C.C Kerb on both sides

410 Rmt 1 x 1 410.0 0.30 0.30 36.90

36.90 Cum 303.97 Cum 11,216.49

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse
aggregate) for foundations and under flooring bed using 162.0 kgs of
cement, coarse aggregate 40mm size hard , machine crushed granite
from approved quarry including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc., to site, and including all
2 (BLD-CSTN-3-5) charges for machine mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)

C.C Kerb on both sides

410 Rmt 1 x 1.0 410.00 0.30 0.10 12.30

12.30 Cum 5,374.83 Cum 66,110.41

Supply and fixing of C.C. Kerb not less than M30 strength of size 600 X
400 X 110 mm thick with bottom thickness of 110 mm up to height of
350 mm and top width of 50 mm thick chamfering with 45° at starts at
350 mm height to 400 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC Bed in
position to the required line, level and curvature jointed with cement
mortar 1:3 (1 cement : 3 coarse sand), including making joints with or
without grooves (thickness of joints except at sharp curve shall not to
3 (CPWD-II-16.69)
more than 5 mm), including making drainage opening wherever required
and including cost and conveyance of all materials & labour charges
including transportation from approved source, loading & unloading
charges including contractor profit & overhead charges complete for
finished item of work..

C.C Kerb on both sides

410 Rmt 1 x 1 410 410.00

410.00 Rmt 540.78 Rmt 221,719.80

Pathway flooring with 60 mm thick CC pavers - 860 Sqm

Earth work excavation for foundations (Manual Means) of buildings,

septic tank, sump, compound wall in ordinary soils and depositing on
bank with an initial lead of 10m and depth up to 3m including all
operational, incidental, labour charges such as shoring, sheeting,
4 (BLD-CSTN-2-1)
planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

Pathway flooring with 1 x 1 344

60 mm thick CC pavers 2.5 0.1 86.00 Cum 303.97 Cum 26,141.42

Filling with dust in pathways with initial lead in layers not exceeding
15cm thick, watering and ramming including cost and conveyance of
water to work site and all operational, incidental, labour charges, hire
5 charges of T&P etc., and overheads & contractors profit complete for
(BLD-CSTN-2-8) & finished item of work(APSS NO.309&310)
Proc.No.20938 (R&B)/
Dt:14-5-2019

Pathway flooring with

1 x 1 344.0 2.5 0.1 86.00
60 mm thick CC pavers

Page 41 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

86.00 Cum 978.80 Cum 84,176.80

Supply of precast concrete blocks for paving of M-35 grade and thickness
not less than 60 mm for Light traffic areas conforming to IS 15658:2006
in all shapes and designs as per the manufacturer's specification set over
the 50 mm thick sand bed with hand roller compaction with joint neatly in
homogeneous or heterogeneous pattern as the colour and pattern shall
be as per the drawings furnished by the architect, including cost and
6 Data as per SOR conveyance of all materials like cement, sand, water, tiles, etc., to site
including all operational, incidental, labour charges, laying tiles to
required slope as directed by the Engineer- in-charge etc., and
overheads & contractors profit complete for finished item of work

Pathway flooring with

1.0 x 1.0 344.0 2.5 860.00
60 mm thick CC pavers

860.00 sqm 867.10 sqm 745,706.00

Jungle Clearing and level grading- 2000 Sqm

Clearing thin jungle growth ( more than 50 percent open space ) including
bushes upto 30 cm / parthenium and other weeds including burning or
disposing off the same as directed etc., complete and it including all
7 IRR-PMW-1-1 operational, incidental, labour charges, required tools, overheads &
contractors profit complete for finished item of work

Cleaning along the bund

by Manula Means 1 x 1 500.0 3.00
1500.00

1500.00 Sqm 3.05 Sqm 4,575.00

Clearing thick jungle growth ( less than 50 percent open space ) including
bushes upto 30 cm / parthenium and other weeds including burning or
disposing off the same as directed etc., complete.and it including all
8 IRR-PMW-1-2 operational, incidental, labour charges, required tools, overheads &
contractors profit complete for finished item of work

cleaning along the bund

by Manula Means 1 x 1 250.0 1.00
250.00

250.00 Sqm 4.72 Sqm 1,180.00

Clearing and grubbing the land including uprooting wild vegetation,

grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal
of stumps of such trees cut earlier and disposal of unserviceable materials
and stacking of serviceable material to be used or auctioned, upto a lead
9 RBR-STCL-2 of 1000 m including removal and disposal of top organic soil not
exceeding 150 mm in thickness as per Technical Specification Clause 201
MORD / MORTH. By Mechanical Means

Cleaning along the bund

by Mechanical Means 1 x 1 250.0 1.00
250.00
250.00 Sqm 2.57 Sqm 642.50
Desilting of Lake - 6300 cum

Excavation in all kinds of soil including boulders upto 0.3 m diameter for
canal, seating of embankment, filter drains / catch water drains etc.,
including dressing bed and sides to required level and profile, cost of all
materials, machinery, labour, placing the excavated soil neatly in dump
area or for the formation of service road / embankment as directed etc.,
10 (IRR-CAW-1-1) complete with initial lead upto 1 km and all lifts. including all
operational, incidental, labour charges etc., and overheads & contractors
profit complete for finished item of work.

Average depth 2.1m

1 x 1 500 6 2.1 6300.00

6300.00 Cum 140.26 Cum 883,638.00

Stone pitching along the bund - 3150 Sqm

Page 42 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

Earth work excavation for foundations (Manual Means) of buildings,

septic tank, sump, compound wall in ordinary soils and depositing on
bank with an initial lead of 10m and depth up to 3m including all
operational, incidental, labour charges such as shoring, sheeting,
11 (BLD-CSTN-2-1)
planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

For Tow wall 1 x 1 700.00 0.45 0.50 157.50

157.50 Cum 303.97 Cum 47,875.28
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse
aggregate) for foundations and under flooring bed using 162.0 kgs of
cement, coarse aggregate 40mm size hard , machine crushed granite
from approved quarry including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc., to site, and including all
12 (BLD-CSTN-3-5) charges for machine mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)

For Tow wall 1 x 1 700.00 0.45 0.10 31.50

31.50 Cum 5,374.83 Cum 169,307.15
Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened
sand) using hard granite stones carted from approved quarry including
cost and conveyance of all materials like cement, screened sand,
water,Rough stone Through stone, Coursed stones etc., from approved
13 ( BLD-CSTN-6-13 ) quarry, to site, including labour charges for cutting stones to required size
and shape, mixing, of cement, mortar, construction, curing, charges for
scaffolding etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 601 & 615)

For Basement wall 1 x 1 700.00 220.50

0.45 0.70
220.50 Cum 5,284.02 Cum 1,165,126.41

Filling with carted gravel in pathways, trenches, sides of foundations and

basement with initial lead in layers not exceeding 15cm thick, watering
and ramming including cost and conveyance of water to work site and all
14 operational, incidental, labour charges, hire charges of T&P etc., and
(BLD-CSTN-2-8) & overheads & contractors profit complete for finished item of work(APSS
Proc.No.20938 (R&B)/ NO.309&310)
Dt:14-5-2019

For leveling and 1 x 1

profiling for pitching 700.0 4.50 0.20 630.00
work
630.00 Cum 547.79 Cum 345,107.70

Providing and constructing 30 cm thick dry rubble stone pitching with pin
headers at 2 per sqm, complete with initial lead upto 50 m and all lifts
including cost and conveyance to site including all operational,
incidental, labour charges, hand packing, laying to required slope hand
15 IRR-CAW-8-3 packing, finishing as directed by the Engineer- in-charge etc., and
overheads & contractors profit complete for finished item of work

( rubble stones : 0.275 cum/sqm, Stone Chips : 0.045cum/sqm, Pin

Headers 30cm : 2/sqm)
For pitching 1 x 1 700 4.50 3150.00 Sqm 485.99 Sqm 1,530,868.50

Construction of Planter Seater wall 235 Rmt

Earth work excavation for foundations (Manual Means) of buildings,

septic tank, sump, compound wall in ordinary soils and depositing on
bank with an initial lead of 10m and depth up to 3m including all
operational, incidental, labour charges such as shoring, sheeting,
16 (BLD-CSTN-2-1) planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

For planter Seater wall 1 x 1 235.0 0.45 0.45 47.59

47.59 cum 303.97 cum 14,465.93

Page 43 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse

aggregate) for foundations and under flooring bed using 162.0 kgs of
cement, coarse aggregate 40mm size hard , machine crushed granite
from approved quarry including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc., to site, and including all
17 (BLD-CSTN-3-5) charges for machine mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)

For planter Seater wall 1 x 1 235.0 0.45 0.10 10.58

10.58 Cum 5,374.83 Cum 56,865.70

Masonry work in CM(1:6) prop (Cement : Screened sand) in

superstructure with fly ash cement / lime solid blocks of size 290mm x
225mm x 140mm from approved source having minimum crushing
strength of 50 Kg/Sqcm. including cost and conveyance of all materials
18 (BLD-CSTN-5-17) like cement, sand, bricks, water etc., to site,and such as labour charges,
like mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).

For planter Seater wall 1 x 1 235.0 0.45 0.80 84.60

84.60 cum 7,803.79 cum 660,200.63
Plastering 12mm thick single coat in CM(1:5) using screened sand
including cost and conveyance of all materials like cement, sand, water
etc., to site and all operational, incidental charges on materials and
19 (BLD-CSTN-8-3 including cost of all labour charges for mixing mortar, finishing, curing
Amendment in SoR as directed by Engineer-in-charge etc., and overheads & contractors profit
2016-17 ) complete for finished item of work.(SS 901,903 & 904)

For planter Seater wall 1 x 2 235.0 0.50 235.00

235.00 sqm 439.78 sqm 103,348.30
Providing 0.450 m wide Coping with 16 to 18mm thick High Polished
granite up to 8'-00 (2.43 M) other than black and regular colours with
borders and design as per the pattern approved by the Engineer-in-Charge
, set over base coat of cement mortar (1:5) , 12mm thick using screened
sand over the stone ,Brick masonry or CC bed already laid , including
neat grey cement slurry of honey like consistency spread @ 3.3 Kg per
sqm and jointed neatly with white cement paste mixed with pigment of
20 (BLD-CSTN-9-7) matching shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work site and
all operational, incidental labour & lift charges, and cost of base coat
and overheads & contractors profit complete for finished item of work for
Coping (S.S.701 & special)

For planter Seater wall

1 x 1 235.0 0.45 105.75

105.75 Sqm 4,221.58 Sqm 446,432.09

Supply & application of one coat water based cement primer of exterior
grade II and two coats of acrylic exterior emulsion paint having VOC
(BLD-CSTN-12-2& (Volatile Organic Compound) content less than 50 grams/litre for exterior
21 Amendment in SoR walls including cost and conveyance of all materials to site,and all
2011-12) operational, incidental, labour charges etc., and overheads & contractors
profit complete for finished item of work in all floors.

For planter Seater wall 1.0 x 2.0 235.0 0.5 235.00

235.00 Sqm 305.26 Sqm 71,736.10

Construction of see through compound wall - 320 Rmt

Earth work excavation for foundations (Manual Means) of buildings,

septic tank, sump, compound wall in ordinary soils and depositing on
bank with an initial lead of 10m and depth up to 3m including all
operational, incidental, labour charges such as shoring, sheeting,
22 (BLD-CSTN-2-1) planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

For Footings 1 x 67 1.20 1.20 1.20 115.78

For Basement wall 1 x 1 320.00 0.60 0.75 144.00
259.78 Cum 303.97 Cum 78,965.33

Page 44 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse

aggregate) for foundations and under flooring bed using 162.0 kgs of
cement, coarse aggregate 40mm size hard , machine crushed granite
from approved quarry including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc., to site, and including all
23 (BLD-CSTN-3-5) charges for machine mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)

For Footings 1 x 67 1.20 1.20 0.10 9.65

For Basement wall 1 x 1 320.00 0.60 0.10 19.20

28.85 Cum 5,374.83 Cum 155,063.85

Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade

corresponding to IS 456 with minimum cement content of 350 kgs per 1
cum of concrete using CONCRETE MIXER with 20mm size HBG
graded machine crushed hard granite metal (coarse aggregate - as per IS
383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry and
including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water, etc., to site and , centring using Steel
24 (BLD-CSTN-3-13-A) scaffolding pipes , jack props , Waller’s , Foot plates , brackets , steel
centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc.,
and overheads & contractors profit complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402)

For Footings 1 x 67 0.90 16.28

0.90 0.30
16.28 Cum 10,619.61 Cum 172,887.25

For Pedestals 1 x 67 0.60 12.06

0.60 0.50
12.06 Cum 11,298.80 Cum 136,263.53

For Plinth Beam above 1 x 1 320.00 28.80

the basement wall 0.30 0.30
28.80 Cum 13,436.35 Cum 386,966.88

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened

sand) using hard granite stones carted from approved quarry including
cost and conveyance of all materials like cement, screened sand,
water,Rough stone Through stone, Coursed stones etc., from approved
25 (BLD-CSTN-6-13) quarry, to site, including labour charges for cutting stones to required size
and shape, mixing, of cement, mortar, construction, curing, charges for
scaffolding etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 601 & 615)

For Basement wall 1 x 1 320.00 0.45 0.65 93.60

Deductions

Columns -1 x 67 0.60 0.45 0.6 -10.85

82.75 Cum 5,284.02 Cum 437,252.66

Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade

corresponding to IS 456 with minimum cement content of 350 kgs per 1
cum of concrete using CONCRETE MIXER with 20mm size HBG
graded machine crushed hard granite metal (coarse aggregate - as per IS
383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
and,including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site and , centring using
Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts,
26 (BLD-CSTN-3-13-B) Wall Plates etc., including all operational, incidental and labour charges
such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, curing , overheads & contractors profit etc., complete but
excluding cost of steel and its fabrication charges for finished item of
work (APSS No. 402)

For Columns 1 x 67 0.30 0.30 2.00 12.06

12.06 Cum 13,330.45 Cum 160,765.23

Page 45 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

Providing High Yield Strength Deformed (HYSD) / Thermo

Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-
1979) of different diameters for RCC works , including labour charges
for straightening, cutting, bending to required sizes and shapes, placing in
position with cover blocks of approved materials and size and tying and
lap-splicing with binding wire of 18 SWG, forming grills for
(BLD-CSTN-4.2)& reinforcement work as per approved designs and drawings, including cost
27 Amendment in SoR and conveyance of steel bars, including all wastages such as overlaps,
2011-12 page No. 392 couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as
cutting, bending, placing in position, tying including overheads &
contractors profit complete for finished item of work.( APSS No.126)

For Footings 1 x 1 16.28 70 kg/m3 1139.60

For Pedestals 1 x 1 12.06 70 kg/m3 844.20

For Plinth Beam above 2880.00

the basement wall 1 x 1 28.80 100 kg/m3

For Columns 1 x 1 12.06 100 kg/m3 1206.00

6069.80 Kgs 95.91 Kgs 582,154.52

Masonry work in CM(1:6) prop (Cement : Screened sand) in

superstructure with fly ash cement / lime solid blocks of size 290mm x
225mm x 140mm from approved source having minimum crushing
strength of 50 Kg/Sqcm. including cost and conveyance of all materials
28 (BLD-CSTN-5-17) like cement, sand, bricks, water etc., to site,and such as labour charges,
like mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).

For Brick Masonry wall 1 x 1 320.00 55.20

0.23 0.75
55.20 Cum 7,803.79 Cum 430,769.21

Supply and fabrication of MS framed structure like Window Grills,

Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for
chain link mesh works, Roof Trusses by using square / rectangular MS
hollow section as per IS 4923 & Angles as per SP:6(1) IS Hand book,
29 As per Data including cost of welding rods, power charges, labour charges for cutting,
placing, welding and erecting in position and fixing, cost & convenience
of all materials including wastage to site and complete for finished item
of work

Compound Wall Grill 4.50 m x 1.30 m=5.85 Sqm

For main vertical support
using MS hollow
section 80 x 40 x 3.2 mm 67 x 3 1.45 291.45 Rmt
thick @ 5.5 Kg/Rmt

For main horizontal

support using MS
hollow section 80 x 40 x
3.2 mm thick @ 5.5 67 x 1 4.45 298.15 Rmt
Kg/Rmt

@ 5.50 kg per meter 5.5 589.60 3242.80 Kgs

For vertical support
using MS hollow section
70 x 30 x 3.2 mm thick 67 x 4 1.45 388.60 Rmt
@ 4.50 Kg/Rmt

For horizontal support

at top & bottom using
MS hollow section 70 x
30 x 3.2 mm thick @ 67 x 2 4.45 596.30 Rmt
4.50 Kg/Rmt

@ 4.50 kg per meter 4.5 984.90 4432.05 Kgs

For internal vertical
supports using MS
hollow section 25 x 25 x
3.2 mm thick @ 1.980 67 x 8 3.38 1811.68 Rmt
Kg/Rmt

@ 1.980 kg per meter 1.98 1811.68 3587.13 Kgs

Total kgs 11262.0 Kgs 127.14 Kgs 1,431,848.14
Page 46 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

Supply and fabrication works like Window Grills, Compound Wall

Grills, Iron Doors, Windows, Gates, Roof Trusses by using MS solid
plate section as per IS 1730 including cost of welding rods, power
charges, labour charges for cutting, placing, welding & erecting in
30 As per Data position and fixing cost & convenience of all materials including wastage
to site and complete for finished item of work.

MS plate of
150x150x5mm thick @
39.20 Kg/Sqmt as per 67 x 3 0.150 0.150 4.52
design

For fixing grill to

column MS plate of
150x150x5mm thick @ 67 x 4 0.150 0.150 6.03
39.20 Kg/Sqmt as per
design
@39.20 kg per Sqm 39.2 10.55 413.56 Kgs 138.78 Kgs 57,393.86

Painting to new iron work with one coat of Red oxide primer and two
coats with synthetic enamel paint Grade-I VOC (Volatile Organic
Compound) content less than 50 grams/litre over primer coat of red oxid,
(BLD-CSTN-12-7 & 12- including cost and conveyance of all materials like Red oxide primer,
31 Synthetic Enamel Paint to site, incidental, operational and all labour
12-197)
charges etc., and overheads & contractors profit complete for finished
item of work in all floors. (SS No. 1201, 1212 & 1207).

For main vertical support

using MS hollow
67 x 3 1.45 0.24 69.95
section 80 x 40 x 3.2 mm
thick @ 5.5 Kg/Rmt

For main horizontal

support using MS
hollow section 80 x 40 x
67 x 1 4.45 0.24 0.00
3.2 mm thick @ 5.5
Kg/Rmt

For vertical support

using MS hollow section
70 x 30 x 3.2 mm thick 67 x 4 1.45 0.20 0.00
@ 4.50 Kg/Rmt

For horizontal support

at top & bottom using
MS hollow section 70 x 67 x 2 4.45 0.20 0.00
30 x 3.2 mm thick @
4.50 Kg/Rmt
For internal vertical
supports using MS
hollow section 25 x 25 x 67 x 8 3.38 0.10 0.00
3.2 mm thick @ 1.980
Kg/Rmt

MS plate of
150x150x5mm thick @
39.20 Kg/Sqmt as per 67 x 3 0.15 0.150 0.00
design

For fixing grill to

column MS plate of
150x150x5mm thick @ 67 x 4 0.15 0.150 0.00
39.20 Kg/Sqmt as per
design

530.21 Sqm 221.26 Sqm 117,314.26

Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete

MIXER, 20mm size hard granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry, using a minimum quantity of 350 kgs. of cement per 1
cum of concrete , including cost and conveyance of all materials like
32 (BLD-CSTN-3-13-C) cement, fine aggregate (Sand), coarse aggregate, water etc., to site
including steel centring, shuttering, machine mixing, lift charges, laying
concrete, vibrating, curing, overheads & contractors profit etc., complete
for finished item of work (APSS No. 402 & 403)

Page 47 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

For fixing MS grills in

bewteen pedestals above 1 x 67 4.5 0.23 0.1 6.93
the basement wall.

6.93 Cum 7,953.39 Cum 55,116.99

Providing 0.30 m wide Coping with Polished black Kadapa slabs
minimum of 25 mm to 30 mm thick in single piece as specified set over a
base coat of CM (1:5) , 12mm thick using screened sand over already laid
CC bed / RCC roof slab including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to
full depth including cost and conveyance of all materials like cement,
33 (BLD-CSTN-9-1) sand, water, flooring stones etc. complete including all labour charges
like dressing of flooring stones to the required size, flat nosing the edges,
mixing of cement mortar, laying, lift charges , cost of base coat, water
charges etc., and overheads & contractors profit complete for finished
item of work (APSS No.703 & 701)

For coping on top of the 13.57

columns 1 x 67 0.45 0.45

Coping bewteen 120.60

pedestals above the
basement wall. 1 x 67 4.50 0.40

134.17 Sqm 954.71 Sqm 128,093.44

Plastering 12mm thick in two coats using screened sand with base coat of
8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with
dubara sponge finishing including cost and conveyance of all materials
like cement, sand, water etc., to site, ,, and all operational, incidental
charges on materials and including cost of all labour charges for mixing
34 ( BLD-CSTN-8-10)
mortar, finishing, scaffolding, lift charges, curing, including cutting
grooves as directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS 901,903 &
904)

For Brick Masonry wall 553.60

1 x 2 320.00 0.87

For Columns 108.54

4 x 67 0.30 1.35

662.14 Sqm 583.34 Sqm 386,252.75

Providing and applying PMCC / Deco orient base or Equivalent exterior

Texture ( borders and design as per the pattern approved by the Engineer-
in-Charge ) of average 2 to 3 mm thickness over plastered surface to
prepare the surface even and smooth after thoroughly brushing the
surface to remove all dirt and remains of loose powdered materials,
(BLD-CSTN-12-2& applying emery paper, Sand the surface, clean & wipe off loose dust,
35 Amendment in SoR applying putty/ texture paint filler by putty knife / muslin pad, air dry for
2011-12) 2 - 3 hrs for the surface preparation including cost and conveyance of
all materials to work site and all operational, incidental, labour charges,
scaffolding charges, overheads and contractors profit etc., complete for
finished item of work in all floors for external walls

For Brick Masonry wall 553.60

1 x 2 320.00 0.87
For Columns 108.54
4 x 67 0.30 1.35
662.14 Sqm 475.22 Sqm 314,662.17

Supply & application of one coat water based cement primer of exterior
grade II and two coats of acrylic exterior emulsion paint having VOC
(Volatile Organic Compound) content less than 50 grams/litre for exterior
(BLD-CSTN-12-2&
walls including cost and conveyance of all materials to site,and all
36 Amendment in SoR
operational, incidental, labour charges etc., and overheads & contractors
2011-12)
profit complete for finished item of work in all floors.

For Brick Masonry 320.00 0.87 553.60

1 x 2
For Columns 0.30 1.35 108.54
4 x 67
662.14 Sqm 305.26 Sqm 202,124.86

Sub Total - I 11,890,335.14

Softscape

Page 48 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth,

refilling with red garden soil including cost of red garden soil and
farmyard manure at 4:1 ratio, internal transportation of plants, planting
etc., including the application of fertilizers and pesticides etc.,(@ 20
gms/pit/sqmt) and it including all operational, incidental, labour charges,
required tools, overheads & contractors profit complete for finished item
of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and
37 As per Data plant material etc., - unit 1 Sqmt of work. (* 5 No./Sqm of plants & bag
size shall be arrived based on the spacing 0.45 c/c as per the design.)(Red
garden soil in this context it is defined as sandy loamy garden soil
congenial for plant growth which shall be of light textured, crystalline,
porous and friable, fertile, slightly acidic or neutral).

Shrub / Hedge planting

1x 1 186.00 1.00 186.00
in 0.45 m trench

Total 186.00 Sqm 719.64 Sqm 133,853.04

Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once
in a month) it including all operational, incidental, labour charges for
38 As per Data complete of work, for one month maintenance.

Shrub / Hedge planting 186.00

in 0.45 m trench 1 x 1 186.00 Sqm 100Sq/
month
186.00 Sqm 472.50 878.85
Maintenance of hedge/shrub planting: Edge cutting 0.30mtr. away from
the edges/shrub (once in a month) and application of fertilizers,
insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by
manually excluding cost of fertilizers it including all operational,
39 As per Data
incidental, labour charges, for complete of work. for one month
maintenance.

Shrub / Hedge planting 186.00

in 0.45 m trench 1 x 1 186.00 Sqm 100Sq/
month
186.00 Sqm 464.10 863.23
Maintenance of hedge/shrub planting: watering once in 2 days @ 5
Lts/per sqmt shall be provide to maintain sub soil moisture continuously
by manually excluding cost of wateri ncluding all operational,
40 As per Data incidental ,labour charges for complete of work.. for one month
maintenance.

Shrub / Hedge planting 186.00

in 0.45 m trench 1 x 1 186.00 Sqm 100Sq/
month
186.00 Sqm 787.50 1,464.75
Digging of 0.75x0.75x0.75 mtrs. pit, filling with soil mixture of red
garden soil, farmyard manure at 4:1 ratio including internal transport,
application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal
transportation of plants, planting the plants etc., and it including all
operational, incidental, labour charges, required tools, overheads &
contractors profit complete for finished item of work. (excluding cost of
41 As per Data plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)
(Red garden soil in this context it is defined as sandy loamy garden soil
congenial for plant growth which shall be of light textured, crystalline,
porous and friable, fertile, slightly acidic or neutral)

Trees 142 142.00

Total 142.00 Nos 678.40 Each 96,332.80
Maintenance of Palms/Tree planting: Trimming (once in month) and
application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt)
(once in quarterly) by manually excluding cost of fertilizers, it including
42 As per Data all operational, incidental ,labour charges, for complete of work for one
month maintenance.
100
Palms/Tree maintenance Nos/
for 1month 1 x 142 142.00 Nos
month
142.00 Nos 609.00 864.78

Maintenance of Palms/Tree planting: formation of basins 0.30m . away

from the edges of plant (once in a month) it including all operational,
incidental ,labour charges for complete of work for one month
43 As per Data maintenance. 100
Nos/
month

Page 49 of 333
 100
Rate Per Unit Nos/ Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) month (in Rs.)

Palms/Tree maintenance 1 x 142

for 1month 142.00 Nos
142.00 Nos 1092.00 1,550.64
Maintenance of Palms/Tree planting: watering (once in three days @ 5
Lts/per plant shall be provide to maintain sub soil moisture
continuously) by manually, but excluding cost of water including all
44 As per Data operational, incidental ,labour charges for complete of work. for one 100
month maintenance. Nos/
month
Palms/Tree maintenance 1 x 142
for 1month 142.00 Nos

142.00 Nos 945.00 1,341.90

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers
and specified plants as per directions of officer in charge at site including
cost of plants
plants of bag size
7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet,
18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom
dia of the stem is 0.75'' and above,
45 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet,
bottom dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown,
vigorously growing tip, healthy foliage without any infestation and the
plants shall be supplied after proper hardening off.
the rates inclusive of cost of plants and labour charges for handling &
complete for finished item of work.

Plants names Bag size

Shrub / Hedge planting

in 0.45 m trench

Pseuderanthemum
Carruthersii 13" x 13" 930.0 Nos 100.00 each 93,000.00

Floating Plants 792

No.s

Department supply
Nymphaeaceae Small pot 792.0 Nos 350.00 each 277,200.00
Palms/Tree

Peltophorum Pterocarpum 21" x 21" 70.00 Nos 600.00 each 42,000.00

Callistemon Viminalis 21" x 21" 2.00 Nos 600.00 each 1,200.00

Cassia Javanica 21" x 21" 70.00 Nos 600.00 each 42,000.00

Loading and unloading of plants bag size (21"X21") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P
46 As per data etc.,and overheads & contractors profit complete for finished item of
work (excluding cost of plant bag)

per 100
Topiary/trees/Palms 21" x 21" 142.00 Nos 3582.45 5,087.08
nos
Loading and unloading of plants bag size (13"X13") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P
etc.,and overheads & contractors profit complete for finished item of
47 As per data work (excluding cost of plant bag)

shrubs/ ground covers per 100

13" x 13" 930.00 Nos 323.41 3,007.71
/floating Plants nos

Loading and Unloading of plants bag size (8"X10") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P
etc.,and overheads & contractors profit complete for finished item of
48 As per data work (excluding cost of plant bag)

Page 50 of 333
 Rate Per Unit Amount
Sl.No Item Code Description of Item Nos. L B D QTY Unit Unit
(in Rs.) (in Rs.)

8" x 10"
shrubs/ ground covers per 100
792.00 Nos 94.22 746.22
/floating Plants nos

Sub Total - II 701,391.00

Total = ( Sub Total - I to Sub Total - II ) 12,591,726.14

Transportation of bag
plants form Kadiyam to
in GVMC . ( Actual
payment will paid for the
actual work done Approxima
te weight
subjected to approval of No. of weight in
Bag size of plants of Unit
the weight by the bag size in plants Kgs
competent authority ) Kgs

21" x 21" 50.00 142.0 Nos 7100.00 Kgs

13" x 13" 10.00 930.0 Nos 9300.00 Kgs

8" x 10" 4.00 792.0 Nos 3168.00 Kgs

1,864 Nos 19,568.0 Kgs

49 LS Provision for transportation of bag plants Total weight 19.570 metric ton LS 50,000.00

50 LS Provision for Irrigation facilities 250,000.00

Provision for Aerators- 2No's 300,000.00
51 LS
Provision for minimum external electrification
52 LS 300,000.00

53 Add Price Price adjustment @ 5 % on Total = ( Sub Total - I to Sub Total - II ) 629,586.31

54 Add Tender premium @ 5 % on Total = ( Sub Total - I to Sub Total - II ) 629,586.31

55 Add NAC @ 0.1 % on Total = ( Sub Total - I to Sub Total - II ) + 49 to 54 14,750.90

56 Add Publication Charges @ 1 % on Total = ( Sub Total - I to Sub Total - II ) 125,917.26

Total 14,891,566.92

Add GST @18 % on Total 2,680,482.05

Add seigniorage charges @ 1.50 % on Sub Total - I 178,355.03

Add Consultancy & engineering supervision Charges @ 5% on Total 744,578.35

Add unforeseen items 5,017.65

Grand Total 18,500,000.00

Page 51 of 333
 A.P. Greening and Beautification Corporation

Name of the Work:- Detailed estimate for development of landscape (Softscape & Hardscape) Rejuvenation of Water Body at
Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT 2.0 )
Err:509
Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Softscape
Bed preparation for Dibbling for Bermuda/Doob/ Shade Grass :-Dressing the
surface to the desired shape, laying 150 mm (6”) thick fine red garden soil, covered
with a thin layer of 10 mm thick sand, watering, compacting to 4" thickness by
hand roller including cost of red garden soil, sand and labour charges etc. complete
for bed preparation and dibbling rooted slips of grass @2" apart and ramming
including slipping of grass, racking the soil before dibbling, watering and
As per
1 Data
ramming complete etc., and it including all operational, incidental, labour charges,
required tools, overheads & contractors profit complete for finished item of work
excluding cost of dibbling grass and fertilizer for 1 sqm
Red garden soil in this context it is defined as sandy loamy garden soil congenial
for plant growth which shall be of light textured, crystaline, porous and friable,
fertlie, slightly acidic or neutral

For paspalum grass 1 x 1 50.00 10.00 500.00

500.00 Sqm 265.14 Sqm 132,570.00
Bed preparation for Korean/Mexican: Dressing the surface to the desired shape,
laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10
mm thick sand, watering, rolling (compacting to 4" thickness by hand roller),
including the cost of red garden soil, sand and labour charges etc., for complete
bed preparation and laying and ramming of lawn mats / rolls in proper position on
existing prepared bed by internal transportation from dumped place, including cost
As per of labour for laying, ramming by hand roller / demesha, internal transportation and
2 Data watering etc., and it including all operational, incidental, labour charges, required
tools, overheads & contractors profit complete for finished item of work. excluding
cost of grass, fertilizers and chemicals etc., for 1 Sqm
(Red garden soil in this context it is defined as sandy loamy garden soil congenial
for plant growth which shall be of light textured, crystalline, porous and friable,
fertile, slightly acidic or neutral)

For Korean grass 1 x 1 47.50 10.00 475.00

475.00 Sqm 311.52 Sqm 147,972.00
Maintenance of lawns: Lawn mowing with electric motor / portable cutter machine
and edging & weeding of the lawns (once in 15 days from June - Nov and once in
30 days from Dec - May) with watering 10 to 15 ltrs /per Sqmt/per day basing on
As per season and weather conditions (30 watering is required in a month to maintain
3 Data sub-soil moisture continuously), application of fertilizers, insecticides, Fungicides
(once in a month) by manual excluding cost of fertilizers & water. for one year

For paspalum grass 1 x 1 500.00 500.00

For Korean grass 1 x 1 475.00 475.00
100
975.00 Sqm 942.38 Sqm/ 110,258.46
month

Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth, refilling with
red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio,
internal transportation of plants, planting etc., including the application of
fertilizers and pesticides etc.,(@ 20 gms/pit/sqmt) and it including all operational,
incidental, labour charges, required tools, overheads & contractors profit complete
As per for finished item of work, but excluding the cost of the fertilizers (@ 20
4 Data gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 5 No./Sqm of
plants & bag size shall be arrived based on the spacing 0.45 c/c as per the design.)
(Red garden soil in this context it is defined as sandy loamy garden soil congenial
for plant growth which shall be of light textured, crystalline, porous and friable,
fertile, slightly acidic or neutral).

Shrub / Hedge planting 1 x 1 1294.17 1.20 1553.00

Total 1553.00 Sqm 719.64 Sqm 1,117,600.92
Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once in 15
days) watering (once in a day @ 5 Lts/per sqmt/per day shall be provide to
maintain sub soil moisture continuously). Edge cutting 0.30mtr. away from the
As per edges/shrub (once in a month) and application of fertilizers, insecticides,
5 Data 100
Fungicides ( once in a month @ 20 gms/pit/sqmt) etc., by manually excluding cost Sqm/
of water and fertilizers for one year month

For Hedge / shrub planting 1 x 1

1553.00 Sqm 2984.10 556,116.88
Bed preparation for Ground cover / Flower beds: Digging the trench of size 150
mm. depth, and Formation of 150 mm. (6") thick of soil mixture at 3:1:1 ratio red
garden soil, farmyard manure and river sand, application of fertilizers (@ 20
gms/pit/sqmt) by making smooth surface as per design including cost of soil
mixture, filling of the soil mixture and internal transportation etc., and it including
As per all operational, incidental, labour charges, required tools, overheads & contractors
6 Data profit complete for finished item of work. (excluding cost of plant material,
fertilizers and chemicals (@ 20 gms / pit/ sqmt))-unit 1 Sqmt of work. (* 25
No./Sqm of plants & bag size shall be arrived based on the spacing 0.2 c/c as per
the design.)(Red garden soil in this context it is defined as sandy loamy garden soil
congenial for plant growth which shall be of light textured, crystalline, porous and
friable, fertile, slightly acidic or neutral)

Page 52 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Groundcover/flower beds (Slope 1 x 1 4475.00 1.00
stablization) 4475.00
Total 4475.00 Sqm 305.48 Sqm 1,367,023.00
Maintenance of groundcover/flower beds: Weeding, Trimming/pinching and
keeping the ground cover in healthy condition (once in a fortnight). Watering to
As per ground cover (one's in three day's @ 5 litres/per Sqmts shall be provide to maintain
7 Data sub soil moisture continuously) by manually, excluding cost of water. (Observed
Data) for one year

groundcover/flower beds 1 x 1 100

4475.00 Sqm 1344.00 Sqm/ 721,728.00
month
Digging of 0.75x0.75x0.75 mtrs. pit, filling with soil mixture of red garden soil,
farmyard manure at 4:1 ratio including internal transport, application of fertilizers
and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the
plants etc., and it including all operational, incidental, labour charges, required
As per tools, overheads & contractors profit complete for finished item of work.
8 Data (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)
(Red garden soil in this context it is defined as sandy loamy garden soil congenial
for plant growth which shall be of light textured, crystalline, porous and friable,
fertile, slightly acidic or neutral)
Ornamental planting 1 x 125 125.00
Trees 1 x 655 655.00
Total 780.00 Nos 678.40 Each 529,152.00
Maintenance of Palms/Tree planting: Trimming (once in month), watering (once
in three days @ 5 Lts/per plant shall be provide to maintain sub soil moisture
continuously), formation of basins 0.30m . away from the edges (once in a month)
As per
9 Data and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in
100
quarterly) by manually, but excluding cost of water & fertilizers for month for Nos/
one year month

For Maintenance of Palms/Tree planting: 780.00 Nos 2646.00 247,665.60

Total - I 4,930,086.9
10 Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and
specified plants as per directions of officer in charge at site including cost of
plants
plants of bag size
7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet,
18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the
stem is 0.75'' and above,
21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom
dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown, vigorously
growing tip, healthy foliage without any infestation and the plants shall be supplied
after proper hardening off.
the rates inclusive of cost of plants and labour charges for handling & complete for
finished item of work.

Plants names Bag size

lawn
For paspalum grass Sqm 500.00 Sqm 100.00 Sqm 50,000.00
For Korean grass Sqm 475.00 Sqm 200.00 Sqm 95,000.00
Hedge /shrub plants
Shrub / Hedge planting 7" x 8" 15530.0 Nos 60.00 each 931,800.00
For Ground covers / Flower beds
Groundcover/flower beds (Slope 4" x 7"
stablization) 89500.0 Nos 30.00 each 2,685,000.00

Palms/Tree planting
Ornamental planting 21" x 21" 125.00 Nos 750.00 each 93,750.00
Trees 21" x 21" 655.00 Nos 750.00 each 491,250.00
Total : II Err:509
Total :I+II Err:509
Hardscape (Civil works)
11 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For C.C kerb 1 x 1 1735 0.30 0.30 156.15

For cobble stone flooring in path ways 1 x 1
57.14 3.50 0.10 20.00

For granite stone flooring at Entrance 1 x 1

plaza and path ways 81.50 10.00 0.10 81.50
For pathway flooring with tandur stone 1 x 1 576.25 4.00 0.10 230.50
For pathway flooring with kadappa stone 1 x 1 664.00 4.00 0.10 265.60
Page 53 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For pathway flooring with CC tiles 1 x 1 350.00 4.00 0.10 140.00
For parking area flooring with 60 mm thick 1 x 1
C.C pavers 135.00 3.00 0.10 40.50
934.25 Cum 303.97 Cum 283,983.97
12 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

For C.C kerb 1 x 1.00 1735.00 0.30 0.10 52.05

For cobble stone flooring in path ways
1 x 1.00 57.14 3.50 0.10 20.00
For granite stone flooring at Entrance
plaza and path ways 1 x 1.00 81.50 10.00 0.10 81.50

For pathway flooring with tandur stone 1 x 1.00 576.3 4.0 0.10 230.50

For pathway flooring with kadappa stone 1 x 1.00 664.0 4.0 0.10 265.60

For pathway flooring with CC tiles 1 x 1.00 350.0 4.0 0.10 140.00

789.65 Cum 5,374.83 Cum 4,244,234.51

13 (CPWD Supply and fixing of C.C. Kerb not less than M30 strength of size 600 X 400 X
-II- 110 mm thick with bottom thickness of 110 mm up to height of 350 mm and top
16.69) width of 50 mm thick chamfering with 45° at starts at 350 mm height to 400 mm
height as selected by the Engineer-in-charge from approved source/ factory which
is laid on existing CC Bed in position to the required line, level and curvature
jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints
with or without grooves (thickness of joints except at sharp curve shall not to more
than 5 mm), including making drainage opening wherever required and including
cost and conveyance of all materials & labour charges including transportation
from approved source, loading & unloading charges including contractor profit &
overhead charges complete for finished item of work..

For C.C kerb 1 x 1 1735 1735.00

1735.00 Rmt 540.78 Rmt 938,253.30
14 As Per Supply and fixing of Kadapa slab (rough) 50mm thick and size of 0.457x0.457m
Data stone edging including excavating trench in ordinary soil, laying P.C.C (1:4:8) 100
mm thick and fixing the stone in alignment and refilling the excavated soil
conveyance of all materials and labour charges including transportation complete
for finished item of work

For Soft scape works 1 x 1 850.00 850.00

850.00 Rmt 181.13 Rmt 153,960.50

15 (BLD- Filling with carted gravel in pathways, trenches, sides of foundations and basement
CSTN- with initial lead in layers not exceeding 15cm thick, watering and ramming
2-8) & including cost and conveyance of water to work site and all operational, incidental,
Proc.No labour charges, hire charges of T&P etc., and overheads & contractors profit
.20938 complete for finished item of work(APSS NO.309&310)
(R&B)/
Dt:14-5-
2019 For murrum pathway 1 x 1 1940.0 5.00 0.15 1455.00
For gravel court area 1 x 1 54.2 6.00 0.15 48.75
1503.75 Cum 547.79 Cum 823,739.21
16 (BLD- Flooring with 16 to 18mm thick high polished / Flame Finished / leather finished
CSTN- granite stone slabs other than black and regular colours (i.e. of shades like
9-7) paradise / bala flower / copper silk / laka red / lavender blue) with borders and
design as per the pattern approved by the Engineer-in-Charge of length not less
than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using
screened sand over CC bed already laid or RCC roof slab including neat grey
cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching shade to full depth
including cost and conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift charges,
polishing charges and cost of base coat and overheads & contractors profit
complete for finished item of work (S.S.701 & special)

For granite stone flooring at Entrance

plaza and path ways 1 x 1 81.5 10.0 815.00

815.00 Sqm 4,186.05 Sqm 3,411,630.75

Page 54 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
17 Flooring with grey/black colours granite cubes size of 100x100x100 mm with two
line dressed in proper shapes, and designs as per the directions of Engineer in-
charge with and laying 50 mm thick CM(1:8) bed and fixing cubes and filled
joints neatly with CM(1:1) in homogeneous or heterogeneous pattern as the colour
and pattern shall be as per the drawings furnished by the architect or as per the
directions of Engineer in-charge, and including cost and conveyance of all
materials like cement, fine aggregate (sand) , water, granite cobble ,wastage etc., to
site and , including all operations, incidental labour charges such as laying
Cement mortar, levelling , fixing cubes in approved pattern ,jointing and
complete for finished item of work.

For cobble stone flooring in path ways 1 x 1 57.14 3.5 199.99

199.99 Sqm 3,941.59 Sqm 788,278.58

18 (BLD- Filling with dust in pathways with initial lead in layers not exceeding 15cm thick,
CSTN- watering and ramming including cost and conveyance of water to work site and all
2-8) & operational, incidental, labour charges, hire charges of T&P etc., and overheads &
Proc.No contractors profit complete for finished item of work(APSS NO.309&310)
.20938
(R&B)/
Dt:14-5-
2019
For parking area flooring with 60 mm thick
C.C pavers 1 x 1 135 3 0.10 40.50

Stone Dust filling

1 x 1 310 5 0.15 232.50

273.00 Cum 978.80 Cum 267,212.40

19 As Per Supply of precast concrete blocks for paving of M-35 grade and thickness not less
Data than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and
designs as per the manufacturer's specification set over the 50 mm thick sand bed
with hand roller compaction with joint neatly in homogeneous or heterogeneous
pattern as the colour and pattern shall be as per the drawings furnished by the
architect, including cost and conveyance of all materials like cement, sand,
water, tiles, etc., to site including all operational, incidental, labour charges, laying
tiles to required slope as directed by the Engineer- in-charge etc., and
overheads & contractors profit complete for finished item of work

For parking area flooring with 60 mm thick

C.C pavers 1 x 1 135.00 3.00 405.00

405.00 Sqm 867.10 Sqm 351,174.05

Page 55 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
20 (BLD- Flooring with Rough Shahabad / Tandur stone slabs of 40 mm thick set over base
CSTN- coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof
9-2) slab, including pointing with cement mortar 1:3 duly filling joints nearly, including
cost of all materials like flooring stone, cement, sand, and water etc., complete,
including labour charges for dressing of flooring stones etc., complete for finished
item of work,. (APSS No.703 & 701)

For pathway flooring with tandur stone

1 x 1 576.3 4.0 2305.00

2305.00 Sqm 809.61 Sqm 1,866,152.81

21 (BLD- Flooring with Rough black Kadapa slabs minimum of 50 mm thick of size
CSTN- 0.457m x 0.457m set over base coat of cement mortar (1 : 8) 12 mm thick over CC
9-2) bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly
filling joints nearly, including cost of all materials like flooring stone, cement,
sand, and water etc., complete, including labour charges for dressing of flooring
stones etc., complete for finished item of work,. (APSS No.703 & 701)

For pathway flooring with kadappa stone 1 x 1 664.0 4.0 2656.00

2656.00 Sqm 803.59 Sqm 2,134,325.12
22 (BLD- Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801
CSTN- using aggregates, cement, pigments of size 300mm x 300mm and thickness 25mm
9-4) of any shade as approved by Engineer - In - Charge set over base coat of cement
mortar (1:6), 12 mm thick using screened sand over CC bed already laid or RCC
roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs
per sqm and jointed with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials like cement, sand,
water and tiles etc., and overheads & contractors profit complete for finished item
of work.

For pathway flooring with CC tiles 1 x 1 350.0 4.0 1400.00

1400.00 Sqm 1,037.41 Sqm 1,452,367.11

For Construction of Planter boxes size of 3.2 m x 3.2 m x 0.45 m -20 No's
Seater wall -75 Rmt

21 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For planter box wall 20 x 1 12.8 0.45 0.45 51.84

For seating modules 5.0 x 2.0 m 0 x 1 14.0 0.45 0.30 0.00
For seater wall 1 x 1 75.0 0.45 0.45 15.19
67.03 cum 303.97 cum 20,375.11
22 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

For planter box wall 20 x 1 12.8 0.45 0.10 11.52

For seating modules 5.0 x 2.0 m 0 x 1 14.0 0.45 0.10 0.00
For seating modules 5.0 x 2.0 m floor bed 0 x 1 5.0 2.0 0.10 0.00
For seater wall 1 x 1 75.0 0.45 0.10 3.38
14.90 Cum 5,374.83 Cum 80,084.97
23 (BLD- Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with
CSTN- fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from
5-17) approved source having minimum crushing strength of 50 Kg/Sqcm. including cost
and conveyance of all materials like cement, sand, bricks, water etc., to site,and
such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, overheads and contractor profit etc.,
complete for finished item of work. (APSS No. 501 & 504).

For planter box wall 20 x 1 12.8 0.23 0.80 47.10

For seating modules 5.0 x 2.0 m 0 x 1 14.0 0.23 0.40 0.00
For seater wall 1 x 1 75.0 0.23 0.80 13.80
60.90 cum 7,803.79 cum 475,250.81

Page 56 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
24 (BLD- Plastering 12mm thick single coat in CM(1:5) using screened sand including cost
CSTN- and conveyance of all materials like cement, sand, water etc., to site and all
8-3 operational, incidental charges on materials and including cost of all labour
Amend charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc.,
ment in and overheads & contractors profit complete for finished item of work.(SS 901,903
SoR
& 904)
2016-17
)

For planter box wall 20 x 2 12.8 0.50 256.00

For seating modules 5.0 x 2.0 m 0 x 1 14.0 0.30 0.00
For seater wall 1 x 2 75.0 0.50 75.00
331.00 sqm 439.78 sqm 145,567.18

Page 57 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Providing 0.30 m wide Coping with Polished black Kadapa slabs minimum of 25
mm to 30 mm thick in single piece as specified set over a base coat of CM (1:5) ,
12mm thick using screened sand over already laid CC bed / RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm
(BLD-
and jointed with neat cement to full depth including cost and conveyance of all
25 CSTN- materials like cement, sand, water, flooring stones etc. complete including all
9-1) labour charges like dressing of flooring stones to the required size, flat nosing the
edges, mixing of cement mortar, laying, lift charges , cost of base coat, water
charges etc., and overheads & contractors profit complete for finished item of work
(APSS No.703 & 701)

For planter box wall top side 20 x 1 12.8 0.30 76.80

For planter box wall top side 1 x 1 75.0 0.30 22.50
99.30 Sqm 954.71 Sqm 94,802.40
26 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR
floors.
2011-
12)

For planter box wall 20 x 1 12.8 0.50 128.00

For seating modules 5.0 x 2.0 m 0 x 1 14.0 0.3 0.00
For planter box wall 1 x 1 75.0 0.50 37.50
For seater wall 1 x 2 75.0 0.50 75.00
240.50 Sqm 305.26 Sqm 73,415.03
27 (BLD- Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801
CSTN- using aggregates, cement, pigments of size 300mm x 300mm and thickness 25mm
9-4) of any shade as approved by Engineer - In - Charge set over base coat of cement
mortar (1:6), 12 mm thick using screened sand over CC bed already laid or RCC
roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs
per sqm and jointed with neat white cement to full depth mixed with pigment of
matching shade including cost and conveyance of all materials like cement, sand,
water and tiles etc., and overheads & contractors profit complete for finished item
of work.

For seating modules 5.0 x 2.0 m floor bed 0 x 1.0 5.0 2.0
0.00
0.00 Sqm 1,037.41 Sqm -

Construction of main Entrance Gate size of 6.0 m x 2.30 m - 1 nos

28 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For Footings 1 x 2 1.20 1.20 1.50 4.32

4.32 Cum 303.97 Cum 1,313.15
29 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

For Footings 1 x 2 1.2 1.2 0.10 0.29

For Plinth Beam 1 x 1 10.00 0.40 0.10 0.40
0.69 Cum 5,374.83 Cum 3,708.63
30 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 1 x 2 0.9 0.9 0.30 0.49

0.49 Cum 10,619.61 Cum 5,203.61
For Pedestals 1 x 2 0.60 0.60 1.10 0.79
0.79 Cum 11,298.80 Cum 8,926.05
For Plinth Beam 1 x 1 10.00 0.23 0.30 0.69
0.69 Cum 13,436.35 Cum 9,271.08

Page 58 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
31 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-B) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood
Posts, Wall Plates etc., including all operational, incidental and labour charges
such as machine mixing, lifting of concrete manually, laying concrete, vibrator,
curing , overheads & contractors profit etc., complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402)

For Columns 1 x 1 0.30 0.30 5.00 0.45

0.45 Cum 13,330.45 Cum 5,998.70
32 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-C) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies , Bamboos , Wooden Reapers , Runners ,
Wood Posts , Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, , curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

For Beam 1 x 1 5.00 0.30 0.45 0.68

0.68 Cum 11,452.05 Cum 7,787.39
33 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR forming grills for reinforcement work as per approved designs and drawings,
2011- including cost and conveyance of steel bars, including all wastages such as
12 page overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
No. 392 wire, cover blocks and all incidental, operational, labour charges such as cutting,
bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 0.490 70.00 Kg/Cum 34.30

For Pedestals 1 x 1 0.790 70.00 Kg/Cum 55.30
For Plinth Beam 1 x 1 0.690 100.00 Kg/Cum 69.00
For Columns 1 x 1 0.450 100.00 Kg/Cum 45.00
For Beam 1 x 1 0.680 100.00 Kg/Cum 68.00
271.60 Kgs 95.91 Kgs 26,049.16
34 (BLD- Plastering 12mm thick single coat in CM(1:5) using screened sand including cost
CSTN- and conveyance of all materials like cement, sand, water etc., to site and all
8-3 operational, incidental charges on materials and including cost of all labour
Amend charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc.,
ment in and overheads & contractors profit complete for finished item of work.(SS 901,903
SoR & 904)
2016-
17 )

For beam 1 x 1 5.00 1.40 7.00

7.00 Sqm 454.48 Sqm 3,181.35
35 (As per Providing and applying PMCC / Deco orient base or Equivalent exterior Texture
Amend ( borders and design as per the pattern approved by the Engineer-in-Charge ) of
ment in average 2 to 3 mm thickness over plastered surface to prepare the surface even and
SoR smooth after thoroughly brushing the surface to remove all dirt and remains of
2011- loose powdered materials, applying emery paper, Sand the surface, clean & wipe
12) off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air
dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all
materials to work site and all operational, incidental, labour charges, scaffolding
charges, overheads and contractors profit etc., complete for finished item of work
in all floors for external walls

For beam 1 x 1 5 1.4 7.00

7.00 Sqm 475.22 Sqm 3,326.51
36 Providing cladding to wall with High Polished Granite 16 to 18 mm thick up to 8'-
00 (2.43 M) other than black and regular colours, length equal to flooring slabs set
over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of
(BLD- honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with
CSTN- white cement paste mixed with pigment of matching shade to full depth, including
9-7) cost of all materials like tiles, cement, sand and water etc., and overheads &
contractors profit complete for finished item of work.

For Columns 1 x 4 0.3 4.50 5.40

5.40 Sqm 4,195.54 Sqm 22,655.93

Page 59 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
37 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)

For beam 1 x 1 5 1.4 7.00

7.00 Sqm 305.26 Sqm 2,136.84

38 As per Supply and fabrication of MS framed structure like Window Grills, Compound
Data Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works,
Roof Trusses by using square / rectangular MS hollow section as per IS 4923 &
Angles as per SP:6(1) IS Hand book, including cost of welding rods, power
charges, labour charges for cutting, placing, welding and erecting in position and
fixing, cost & convenience of all materials including wastage to site and complete
for finished item of work

For M.S column Size of 150 x 150 x 5 1 x 2 2.8 5.60 Rmt

mm thick MS hollow section

@ 22.26 kg per meter 22.26 5.60 124.66 Kgs

For M.S Gate 6.0 m x 2.4 m height
For main gate frame of Size 100x50x4 mm 1 x 2 10.5 21.00 Rmt
thick MS hollow section
For Wicket Gate frame of Size 100x50x4 1 x 2 8.3 16.60 Rmt
mm thick MS hollow section

@ 8.59 kg per meter 8.59 37.60 322.98 Kgs

For inner frame of main gate by size 1 x 4 3 12.00 Rmt

50x50x3.6 mm thick MS hollow section

For inner frame of Wicket gate by size 1 x 4 1.5 6.00 Rmt

50x50x3.6 mm thick MS hollow section
@ 4.98 kg per meter 4.98 18.00 89.64 Kgs

537.28 Kgs 127.14 Kgs 68,309.78

39 As per Supply and fabrication of MS framed structure like Window Grills, Compound
Data Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh
works ,Roof Trusses by using MS Flats as per SP:6(1) IS Hand book , including
cost of welding rods, power charges, labour charges for cutting, placing, welding
and erecting in position and fixing, cost & convenience of all materials to site and
complete for finished item of work

For M.S Gate 6.0 m x 2.4 m height

For main gate inclined support of Size 1 x 2 35 70.00 Rmt
50x5 mm thick MS Flat section
For Wicket Gate inclined support of Size 1 x 2 20 40.00 Rmt
50x5 mm thick MS Flat section
@ 2.0 kg per meter 2 110.00 220.00 Kgs
220.00 Kgs 127.14 Kgs 27,970.80
40 As per Supply and fabrication works like Window Grills, Compound Wall Grills, Iron
Data Doors, Windows, Gates, Roof Trusses by using HR sheet/ Perforated Sheet as per
IS 2062 including cost of welding rods, power charges, labour charges for cutting,
placing, welding & erecting in position and fixing cost & convenience of all
materials to site and complete for finished item of work.

For M.S Gate 6.0 m x 2.4 m height

For main gate perforated sheet 2 mm thick 1 x 2 2.65 1 5.30 Sqm

For Wicket Gate perforated sheet 2 mm 1 x 2 1.5 1 3.00 Sqm

thick
@ 14.3 kg per Sqm 14.3 8.30 118.69 Kgs
118.69 Kgs 110.83 Kgs 13,154.58
41 (BLD- Painting to new iron work with one coat of Red oxide primer and two coats with
CSTN- synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less
12-7 & than 50 grams/litre over primer coat of red oxid, including cost and conveyance of
12-12- all materials like Red oxide primer, Synthetic Enamel Paint to site, incidental,
197) operational and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

For M.S column Size of 150 x 150 x 5

mm thick MS hollow section 1 x 2 2.8 0.6 3.36

For M.S Gate 6.0 m x 2.4 m height

For main gate frame of Size 100x50x4 mm
thick MS hollow section 1 x 2 10.5 0.3 6.30

For Wicket Gate frame of Size 100x50x4

mm thick MS hollow section 1 x 2 8.3 0.3 4.98

Page 60 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For inner frame of main gate by size
50x50x3.6 mm thick MS hollow section
1 x 4 3 0.2 2.40

For inner frame of Wicket gate by size

50x50x3.6 mm thick MS hollow section
1 x 4 1.5 0.2 1.20

For main gate inclined support of Size

50x5 mm thick MS Flat section 1 x 2 35 0.1 7.00

For Wicket Gate inclined support of Size

50x5 mm thick MS Flat section 1 x 2 20 0.1 4.00
For main gate perforated sheet 2 mm thick
1 x 2 2.65 1 5.30

For Wicket Gate perforated sheet 2 mm

thick 1 x 2 1.5 1 3.00
37.54 Sqm 221.26 Sqm 8,306.10

Construction of MS pergola of size 10 x 4 m - 4 No's

42 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For RCC pedastal 4 x 10 1.20 1.20 1.5 86.40

86.40 Cum 303.97 Cum 26,263.01
43 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

For RCC pedastal 4 x 10 1.2 1.2 0.1 5.76

5.76 Cum 5,374.83 Cum 30,959.02
44 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 4 x 10 0.90 0.90 0.3 9.72 Cum 10,619.61 Cum 103,222.61
For Pedastal 4 x 10 0.60 0.60 1.1 15.84 Cum 11,298.80 Cum 178,972.99

45 (BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m
CSTN- in trenches, sides of foundations and basement with initial lead in layers not
2-9) exceeding 15cm thick, watering and ramming including cost and conveyance of
water to work site and all operational, incidental, labour charges, hire charges of
T&P etc., and overheads & contractors profit complete for finished item of work
(APSS NO.309&310)

Excavated Quantity 1 x 1 86.40 86.40

86.40 Cum 43.58 Cum 3,765.31
46 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR
forming grills for reinforcement work as per approved designs and drawings,
2011-12
page including cost and conveyance of steel bars, including all wastages such as
No. 392 overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as cutting,
bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 9.72 70.00 kg/Cum 680.40

For Pedastal 1 x 1 15.84 70.00 kg/Cum 1108.80
1789.20 Kgs 95.91 Kgs 171,602.17

Page 61 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
47 As per Supply and fabrication of MS framed structure like Window Grills, Compound
Data Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works,
Roof Trusses by using square / rectangular MS hollow section as per IS 4923 &
Angles as per SP:6(1) IS Hand book, including cost of welding rods, power
charges, labour charges for cutting, placing, welding and erecting in position and
fixing, cost & convenience of all materials including wastage to site and complete
for finished item of work

MS pergola of size 16.5 x 5.20 m

MS Coulmn section size : 150 mm x 150 4 x 10 3.0
mm x 5 mm thickness (22.26 kg per meter) 120.00 Rmt

@ 22.26 kg per meter 22.26 120.00 2671.20 Kgs

MS main purlin section size : 100 mm x 4 x 2 20
100 mm x 5mm thickness (14.41 kg per 160.00 Rmt
meter)
@14.41 kg per meter 14.41 160.00 2305.60 Kgs
MS Ridge purlin section size : 96 mm x 48 4 x 45 5.2
mm x4mm thickness (8.22 kg per meter) 936.00 Rmt

@ 8.22 kg per meter 8.22 936.00 7693.92 Kgs

Total kgs 12670.72 Kgs 127.14 Kgs 1,610,955.34

48 (BLD- Painting to new iron work with one coat of Red oxide primer and two coats with
CSTN- synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less
12-7 & than 50 grams/litre over primer coat of red oxid, including cost and conveyance of
12-12- all materials like Red oxide primer, Synthetic Enamel Paint to site, incidental,
197) operational and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

MS Coulmn section size : 150 mm x 150 4x 10 3 0.60

mm x 5 mm thickness (22.26 kg per meter)
72.00

MS main purlin section size : 100 mm x 4x 2 20 0.40

100 mm x 5mm thickness (14.41 kg per
64.00
meter)

MS Ridge purlin section size : 96 mm x 48 4x 45 5.2 0.29

mm x4mm thickness (8.22 kg per meter) 271.44

407.44 Sqm 221.26 Sqm 90,150.17

Construction of Ornamental RCC columns of size 0.60 x 0.60 x 3.0 m - 24 No's

49 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For RCC footing 1 x 24 1.20 1.20 1.5 51.84

51.84 Cum 303.97 Cum 15,757.80
50 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

For RCC footing 7 x 24 1.2 1.2 0.1 24.19

24.19 Cum 5,374.83 Cum 130,017.14
51 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 7 x 24 0.90 0.90 0.3 40.82 Cum 10,619.61 Cum 433,492.48
For Pedastal 7 x 24 0.60 0.60 1.1 66.53 Cum 11,298.80 Cum 751,709.16

Page 62 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
52 (BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m
CSTN- in trenches, sides of foundations and basement with initial lead in layers not
2-9) exceeding 15cm thick, watering and ramming including cost and conveyance of
water to work site and all operational, incidental, labour charges, hire charges of
T&P etc., and overheads & contractors profit complete for finished item of work
(APSS NO.309&310)

Excavated Quantity 1 x 1 51.84 51.84

51.84 Cum 43.58 Cum 2,259.19

53 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-B) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood
Posts, Wall Plates etc., including all operational, incidental and labour charges
such as machine mixing, lifting of concrete manually, laying concrete, vibrator,
curing , overheads & contractors profit etc., complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402)

For columns 7 x 24 0.60 0.60 3.5 211.68 Cum 8,864.60 Cum 1,876,458.74

54 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR
forming grills for reinforcement work as per approved designs and drawings,
2011-12
page including cost and conveyance of steel bars, including all wastages such as
No. 392 overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as cutting,
bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 40.82 70.00 kg/Cum 2857.40

For Pedastal 1 x 1 66.53 70.00 kg/Cum 4657.10
For columns 1 x 1 211.6870.00 kg/Cum 14817.60
22332.10 Kgs 95.91 Kgs 2,141,871.71
55 (BLD- Plastering 20mm thick in two coats using screened sand with base coat of 16mm
CSTN- thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge
8-9) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work .(SS 901,903 &
904)

For columns 4 x 24 0.6 3.5 201.60

201.60 Sqm 318.45 Sqm 64,199.52
56 (BLD- Providing cladding to wall with High Polished Granite 16 to 18 mm thick up to 8'-
CSTN- 00 (2.43 M) other than black and regular colours, length equal to flooring slabs set
9-7) over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with
white cement paste mixed with pigment of matching shade to full depth, including
cost of all materials like tiles, cement, sand and water etc., and overheads &
contractors profit complete for finished item of work.

For columns 4 x 24 0.6 3.5 201.60

201.60 Sqm 3,713.99 Sqm 748,740.38
57 As per Supply and fabrication of MS framed structure like Window Grills, Compound
Data Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works,
Roof Trusses by using square / rectangular MS hollow section as per IS 4923 &
Angles as per SP:6(1) IS Hand book, including cost of welding rods, power
charges, labour charges for cutting, placing, welding and erecting in position and
fixing, cost & convenience of all materials including wastage to site and complete
for finished item of work

MS purlins along the columns 92.0 m

MS main purlin size : 150 mm x 150 mm x 1 x 2 76.0
5 mm thickness (22.26 kg per meter) 152.00 Rmt

@ 22.26 kg per meter 22.26 152.00 3383.52 Kgs

Total kgs 3383.52 Kgs 127.14 Kgs 430,180.73

58 (BLD- Painting to new iron work with one coat of Red oxide primer and two coats with
CSTN- synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less
12-7 & than 50 grams/litre over primer coat of red oxid, including cost and conveyance of
12-12- all materials like Red oxide primer, Synthetic Enamel Paint to site, incidental,
197) operational and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Page 63 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
MS main purlin size : 150 mm x 150 mm x 1x 2 76 0.60
5 mm thickness (22.26 kg per meter)
91.20

91.20 Sqm 221.26 Sqm 20,178.91

Construction of Entrance Gate size of 4.0 m x 2.0 m-2

59 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For Footings 2 x 2 1.50 1.50 1.80 16.20

16.20 Cum 303.97 Cum 4,924.31
60 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

For Footings 2 x 2 1.5 1.5 0.10 0.90

For Plinth Beam 2 x 1 5.50 0.40 0.10 0.44
1.34 Cum 5,374.83 Cum 7,202.27
61 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 2 x 2 1.2 1.2 0.30 1.73

1.73 Cum 10,619.61 Cum 18,371.93
For Pedestals 2 x 2 0.75 0.75 0.90 2.03
2.03 Cum 11,298.80 Cum 22,936.56
For Plinth Beam 2 x 1 5.50 0.40 0.40 1.76
1.76 Cum 13,436.35 Cum 23,647.98
62 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-B) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood
Posts, Wall Plates etc., including all operational, incidental and labour charges
such as machine mixing, lifting of concrete manually, laying concrete, vibrator,
curing , overheads & contractors profit etc., complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402)

For Columns 2 x 1 0.40 0.40 5.00 1.60

For Columns 2 x 1 0.40 0.40 2.30 0.74
2.34 Cum 13,330.45 Cum 31,193.25

Page 64 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
63 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-C) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies , Bamboos , Wooden Reapers , Runners ,
Wood Posts , Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, , curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

For Beam 2 x 1 5.50 0.40 0.30 1.32

1.32 Cum 11,452.05 Cum 15,116.71
64 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR forming grills for reinforcement work as per approved designs and drawings,
2011- including cost and conveyance of steel bars, including all wastages such as
12 page overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
No. 392 wire, cover blocks and all incidental, operational, labour charges such as cutting,
bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 1.730 70.00 Kg/Cum 121.10

For Pedestals 1 x 1 2.030 70.00 Kg/Cum 142.10
For Plinth Beam 1 x 1 1.760 100.00 Kg/Cum 176.00
For Columns 1 x 1 2.340 100.00 Kg/Cum 234.00
For Beam 1 x 1 1.320 100.00 Kg/Cum 132.00
805.20 Kgs 95.91 Kgs 77,226.73
65 (BLD- Plastering 12mm thick single coat in CM(1:5) using screened sand including cost
CSTN- and conveyance of all materials like cement, sand, water etc., to site and all
8-3 operational, incidental charges on materials and including cost of all labour
Amend charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc.,
ment in and overheads & contractors profit complete for finished item of work.(SS 901,903
SoR & 904)
2016-
17 )

For beam 2 x 1 5.50 1.40 15.40

15.40 Sqm 454.48 Sqm 6,998.99
66 (As per Providing and applying PMCC / Deco orient base or Equivalent exterior Texture
Amend ( borders and design as per the pattern approved by the Engineer-in-Charge ) of
ment in average 2 to 3 mm thickness over plastered surface to prepare the surface even and
SoR smooth after thoroughly brushing the surface to remove all dirt and remains of
2011- loose powdered materials, applying emery paper, Sand the surface, clean & wipe
12) off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air
dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all
materials to work site and all operational, incidental, labour charges, scaffolding
charges, overheads and contractors profit etc., complete for finished item of work
in all floors for external walls

For beam 2 x 1 5.5 1.4 15.40

15.40 Sqm 475.22 Sqm 7,318.39
67 Providing cladding to wall with High Polished Granite 16 to 18 mm thick up to 8'-
00 (2.43 M) other than black and regular colours, length equal to flooring slabs set
over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with
(BLD- white cement paste mixed with pigment of matching shade to full depth, including
CSTN- cost of all materials like tiles, cement, sand and water etc., and overheads &
9-7) contractors profit complete for finished item of work.

For Columns 2 x 4 0.4 4.50 14.40

For Columns 2 x 4 0.4 2.00 6.40
20.80 Sqm 4,195.54 Sqm 87,267.23

68 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)

For beam 2 x 1 5.5 1.4 15.40

Page 65 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
15.40 Sqm 305.26 Sqm 4,701.00
69 As per Supply and fabrication of MS framed structure like Window Grills, Compound
Data Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works,
Roof Trusses by using square / rectangular MS hollow section as per IS 4923 &
Angles as per SP:6(1) IS Hand book, including cost of welding rods, power
charges, labour charges for cutting, placing, welding and erecting in position and
fixing, cost & convenience of all materials including wastage to site and complete
for finished item of work

For M.S column Size of 150 x 150 x 5 mm 2 x 2 2.5 10.00 Rmt

thick MS hollow section

@ 22.26 kg per meter 22.26 10.00 222.60 Kgs

For M.S Gate 4.0 m x 2.0 m height
For sliding gate frame of Size 100x50x4 2 x 1 10 20.00 Rmt
mm thick MS hollow section
For Openable gate frame of Size 2 x 1 6 12.00 Rmt
100x50x4 mm thick MS hollow section
@ 8.59 kg per meter 8.59 32.00 274.88 Kgs

For inner frame of sliding gate by size 2 x 1 9.2 18.40 Rmt

50x50x3.6 mm thick MS hollow section

For inner frame of Openable gate by 2 x 1 5.3 10.60 Rmt

size 50x50x3.6 mm thick MS hollow
section

For inclined support of size 50x50x3.6 mm 2 x 1 2.60 5.20 Rmt

thick MS hollow section

@ 4.98 kg per meter 4.98 34.20 170.32 Kgs

For verticals in sliding gate of size of size 2 x 1 14.41 28.82 Rmt

25x25x2.6 mm thick MS hollow section

For verticals in Openable gate of size of 2 x 1 5.4 10.80 Rmt

size 25x25x2.6 mm thick MS hollow
section
For Horizontals in sliding gate of size 2 x 1 6.83 13.66 Rmt
25x25x2.6 mm thick MS hollow section
@ 1.69 kg per meter 1.69 53.28 90.04 Kgs
MS Angle of size 25x25x5mm for angle 2 x 1 14.4 28.80 Rmt
track
@ 1.8 kg per meter 1.8 14.40 25.92 Kgs
16mm Rebar for anchoring 2 x 24 0.3 14.40 Rmt
@ 1.6 kg per meter 1.6 7.20 11.52 Kgs
For guide rollers & V groove wheel 2 x 20 40.00 Nos
@ 2. kg per each 2 32.00 64.00 Kgs
@ 1.69kg per meter 1.69 53.28 90.04 Kgs
885.32 Kgs 127.14 Kgs 112,559.58
70 (BLD- Painting to new iron work with one coat of Red oxide primer and two coats with
CSTN- synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less
12-7 & than 50 grams/litre over primer coat of red oxid, including cost and conveyance of
12-12- all materials like Red oxide primer, Synthetic Enamel Paint to site, incidental,
197) operational and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

For M.S column Size of 150 x 150 x 5 mm 2 x 2 2.5 0.6 6.00

thick MS hollow section

For M.S Gate 4.0 m x 2.0 m height

For sliding gate frame of Size 100x50x4 2 x 1 10 0.3 6.00
mm thick MS hollow section
For Openable gate frame of Size 2 x 1 6 0.3 3.60
100x50x4 mm thick MS hollow section
For inner frame of sliding gate by size 2 x 1 9.2 0.2 3.68
50x50x3.6 mm thick MS hollow section

For inner frame of Openable gate by 2 x 1 5.3 0.2 2.12

size 50x50x3.6 mm thick MS hollow
section

For inclined support of size 50x50x3.6 mm 2 x 1 2.60 0.2 1.04

thick MS hollow section

For verticals in sliding gate of size of size 2 x 1 14.41 0.1 2.88

25x25x2.6 mm thick MS hollow section

For verticals in Openable gate of size of 2 x 1 5.4 0.1 1.08

size 25x25x2.6 mm thick MS hollow
section
For Horizontals in sliding gate of size 2 x 1 6.83 0.1 1.37
25x25x2.6 mm thick MS hollow section
27.77 Sqm 221.26 Sqm 6,144.39

Page 66 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Construction of Water fountain - 4.0 m x 4.0 m

71 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For bas slab 1 x 1 5.00 5.00 0.75 18.75

18.75 Cum 303.97 Cum 5,699.44
72 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc.,
to site, and including all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15 cm layers finishing top surface
to the required level curing etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

For bas slab bed 1 x 1 5.0 5.0 0.10 2.50

2.50 Cum 5,374.83 Cum 13,437.08
73 Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
corresponding to IS 456 with minimum cement content of 350 kgs per 1
cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970
and IS 2386 Part 1 to Part 8) from approved quarry and using mixed with
integral cement water proofing powder confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by Engineer-in-charge
at 0.5 Kg per one bag of cement , and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc.,
(BLD- to site and , centring using Steel scaffolding pipes , jack props , Waller’s ,
CSTN- Foot plates , brackets , steel centring plates etc., including all operational,
3-13-A) incidental and labour charges such as machine mixing, laying concrete,
vibrator, , curing etc., and overheads & contractors profit complete but
excluding cost of steel and its fabrication charges for finished item of work
(APSS No. 402)

For bas slab 1 x 1 5.00 5.00 0.15 3.75 Cum 11,434.80 Cum 42,880.50
For pedestal 1 x 1 0.90 0.90 1.50 1.22 Cum 11,298.80 Cum 13,784.54

74 Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade

corresponding to IS 456 with minimum cement content of 350 kgs per 1
cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970
and IS 2386 Part 1 to Part 8) from approved quarry and using mixed with
integral cement water proofing powder confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by Engineer-in-charge
at 0.5 Kg per one bag of cement and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to
(BLD- site and , centring using Casurina Ballies, Bamboos, Wooden Reapers,
CSTN- Runners, Wood Posts, Wall Plates etc., including all operational, incidental
3-13-B) and labour charges such as machine mixing, lifting of concrete manually,
laying concrete, vibrator, , curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its fabrication charges for finished
item of work (APSS No. 402)

For R.C.C side wall 200 mm thick height

0.75 m 1 x 1 16.00 0.70 11.20 Sqm

For R.C.C inner side wall 200 mm thick

height 1.20 m 1 x 1 16.00 1.15 18.40 Sqm

29.60 Sqm 3,640.09 Sqm 107,746.66

75 Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically
Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different
diameters for RCC works , including labour charges for straightening,
(BLD- cutting, bending to required sizes and shapes, placing in position with cover
CSTN- blocks of approved materials and size and tying and lap-splicing with
4.2)& binding wire of 18 SWG, forming grills for reinforcement work as per
Amend approved designs and drawings, including cost and conveyance of steel
ment bars, including all wastages such as overlaps, couplings, chairs, spacer bars
in SoR including cost and conveyance of binding wire, cover blocks and all
2011- incidental, operational, labour charges such as cutting, bending, placing in
12 position, tying including overheads & contractors profit complete for
page finished item of work.( APSS No.126)
No.
392

For bas slab 1 x 1 3.750 50.00 Kg/Cum 187.50

Page 67 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For pedestal 1 x 1 1.220 50.00 Kg/Cum 61.00
For R.C.C side wall 200 mm thick height
0.75 m 1 x 1 5.920 50.00 Kg/Cum 296.00

544.5 Kgs 95.91 Kgs 52,223.00

76 Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure
with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm
from approved source having minimum crushing strength of 50 Kg/Sqcm.
including cost and conveyance of all materials like cement, sand, bricks,
(BLD- water etc., to site,and such as labour charges, like mixing cement mortar,
CSTN- scaffolding charges, constructing masonry, lift charges, curing, overheads
5-17) and contractor profit etc., complete for finished item of work. (APSS No. 501
& 504).

For steped wall 100 mm thick avarage

height 0.6 m 1 x 4 4.00 1.50 0.60 11.20

11.20 Sqm 7,803.79 Sqm 87,402.45

77 Flooring with granite stone tiles 8mm thick (mirror polished of all shades) of
1st quality and of size as approved by Engineer-in-charge with borders and
design as per the approved flooring pattern as directed by the Engineer-In -
Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM
(1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC
roof slab , including neat cement slurry of honey like consistency spread
@ 3.3 kgs per Sqm. and jointed neatly with white cement paste to full
(BLD- depth mixed with pigment of matching shade including cost and
CSTN- conveyance of all materials like cement, sand, water, tiles, white cement
9-9) etc., to site (excluding cost of C.C. bed) including cost of base coat and all
labour charges for mixing of cement mortar, laying tiles to required slope
as directed by the Engineer- in-charge etc., and overheads & contractors
profit complete for finished item of work. (APSS No.701 & 707)

For Foubtain area 1 x 1 5.00 5.00 25.00

25.00 Sqm 1,981.93 Sqm 49,548.25
78 Providing cladding to walls with granite stone tiles 8mm thick (mirror
polished of all shades) of 1st quality length equal to flooring slabs set over
base coat of CM(1:5) 12 mm thick using screened sand with cement slurry
of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing
(BLD- with white cement paste mixed with pigment of matching shade to full
CSTN- depth, including cost of all materials like tiles, cement, sand and water etc.,
9-21) and overheads & contractors profit complete for finished item of work.

For R.C.C side wall 200 mm thick height

0.75 m 1 x 1 16.0 0.7 11.20 Sqm

For R.C.C inner side wall 200 mm thick

height 1.20 m 1 x 1 16.0 1.15 18.40 Sqm

For steped wall 100 mm thick avarage

height 0.6 m 1 x 4 4.0 1.5 24.00 Sqm
53.60 Sqm 2,153.27 Sqm 115,415.27

Construction of Food court size of - 6.5 x 4.50 m

79 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For RCC Column Footings 1 x 6 1.50 1.50 1.5 20.25

For Basement wall 1 x 1 22.00 0.6 0.6 7.92
28.17 Cum 303.97 Cum 8,562.83
80 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc.,
to site, and including all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15 cm layers finishing top surface
to the required level curing etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

For RCC Column Footings 1 x 6 1.5 1.5 0.1 1.35

For Basement wall 1 x 1 22 0.6 0.1 1.32
For Floor bed 1 x 1 6.50 4.5 0.1 2.93
5.60 Cum 5,374.83 Cum 30,099.05

Page 68 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
81 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand)
using hard granite stones carted from approved quarry including cost and
conveyance of all materials like cement, screened sand, water,Rough stone
Through stone, Coursed stones etc., from approved quarry, to site, including
labour charges for cutting stones to required size and shape, mixing, of cement,
( BLD-
CSTN-6- mortar, construction, curing, charges for scaffolding etc., and overheads &
contractors profit complete for finished item of work. (APSS No. 601 & 615)
13 )

For Basement wall 1 x 1 22.0 0.45 0.6 5.94

5.94 Cum 5,284.02 Cum 31,387.08
82 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 1 x 6 1.20 1.20 0.3 2.59 Cum 10,619.61 Cum 27,504.79
For Pedastal 1 x 6 0.45 0.45 1.1 1.34 Cum 11,298.80 Cum 15,140.39
For Plinth beam 1 x 1 23.40 0.30 0.3 2.11 Cum 13,436.35 Cum 28,350.70

83 (BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m
CSTN- in trenches, sides of foundations and basement with initial lead in layers not
2-9) & exceeding 15cm thick, watering and ramming including cost and conveyance of
Proc.N water to work site and all operational, incidental, labour charges, hire charges of
o.2093 T&P etc., and overheads & contractors profit complete for finished item of work
8 (APSS NO.309&310)
(R&B)/
Dt:14-
5-2019 50% of Excavated Quantity 1 x 0.5 24.62 12.31
12.31 Cum 43.58 Cum 536.47
84 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-B) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

For RCC Columns 1 x 6 0.23 0.30 3.50 1.45

1.45 Cum 13,330.45 Cum 19,329.15
Lintel beam for doors-1 1 x 1 1.50 0.23 0.15 0.05
Lintel beam for Window-1 1 x 3 1.80 0.23 0.15 0.19
0.24 Cum 13,128.67 Cum 3,150.88
85 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-C) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies , Bamboos , Wooden Reapers , Runners ,
Wood Posts , Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, , curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

Beam 1 x 1 26.50 0.23 0.30 1.83

1.83 Cum 11,452.05 Cum 20,957.25
Slab 125 mm thick 1 x 1 6.6 5.5 36.30
36.30 sqm 1,395.81 sqm 50,667.90

Page 69 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
86 (BLD- Reinforced Cement Concrete Nominal Mix M 20 grade corresponding to IS 456
CSTN- with minimum cement content of 350 kgs per 1 cum of concrete using
3-13-C) CONCRETE MIXER with using 12mm size hard granite machine crushed graded
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of
concrete including cost and conveyance of all materials like cement, fine
aggregate (Sand), coarse aggregate, water etc., to site including steel centring,
shuttering, labour charges such as ,Concrete machine mixing, laying concrete,
lift charges, curing etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.

25mm thick shelves : 1 x 4 3.0 0.6 7.20

7.20 sqm 294.41 sqm 2,119.75
87 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR forming grills for reinforcement work as per approved designs and drawings,
2011- including cost and conveyance of steel bars, including all wastages such as
12 overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
page wire, cover blocks and all incidental, operational, labour charges such as cutting,
No. 392 bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 2.59 70.00 kg/Cum 181.30

For Pedastal 1 x 1 1.34 70.00 kg/Cum 93.80
For Plinth beam 1 x 1 2.11 100.00 kg/Cum 211.00
Columns 1 x 1 1.45 100.00 kg/Cum 145.00
Lintel beam 1 x 1 0.24 70.00 kg/Cum 16.80
beams 1 x 1 1.83 70.00 kg/Cum 128.10
Slab 125 mm thick 1 x 1 4.54 70.00 kg/Cum 317.63
25mm thick shelves : 1 x 1 0.18 70.00 kg/Cum 12.60
1106.23 Kgs 95.91 Kgs 106,098.52
88 (BLD- Providing impervious coat to exposed RCC roof slab surfaces to required slopes
CSTN- with CM (1:3) prop. using screened sand 20mm thick (average) mixed with
10-25) integral cement water proofing liquid confirming to IS: 2645-2003 manufactured
by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one
bag of cement, laid over roof slab when it is green, finished smooth with a floating
coat of neat cement and thread lining at regular intervals of 45cmx45cm including
cost and conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, , and operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread lining, curing
including rounding off junctions of wall and slab etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 901 & 903).

Roof 1 x 1 6.6 5.5 36.30

36.30 Sqm 622.86 Sqm 22,609.82

89 (BLD- Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement :
CSTN- Screened sand) using common burnt clay bricks of class as per Table- I of
5-5) IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved
source having minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks, water etc., to site,
, and such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 501 & 504).

For Walls 230mm thick 1 x 1 26.50 0.23 3.00 18.29

For shelves Walls 230mm thick 1 x 2 0.60 0.23 2.40 0.66
Deductions
Lintel beam for doors -1 x 1 1.5 0.23 0.15 -0.05
Lintel beam for Window -1 x 3 1.8 0.23 0.15 -0.19
For Doors -1 x 1 1.20 0.23 2.1 -0.58
For windows -1 x 3 1.50 0.23 1.20 -1.24
16.89 Cum 8,392.32 Cum 141,746.28
90 ( BLD- Plastering 12mm thick in two coats using screened sand with base coat of 8mm
CSTN- thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge
8-10) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer - in - charge etc., and
overheads & contractors profit complete for finished item of work. (SS 901,903 &
904)

For in side Walls 230 mm thick 1 x 1 26.5 3.15 83.48

For shelves Walls 230mm thick 1 x 2 0.6 2.40 2.88

Page 70 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For shelves 2 x 4 3.00 0.60 14.40
Deductions for Out side Plastering
For Doors -1 x 1 1.2 2.1 -2.52
For window -1 x 3 1.5 1.2 -5.40
92.84 Sqm 598.04 Sqm 55,522.03

91 (BLD- Plastering 20mm thick in two coats using screened sand with base coat of 16mm
CSTN- thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge
8-9) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work .(SS 901,903 &
904)

For Walls 230 mm thick 1 x 1 26.5 3.50 92.75

Add Jambs
For Doors 1 x 1 5.20 0.23 1.20
For window 1 x 3 6.00 0.23 4.14
Deductions
For Doors -1 x 1 1.2 2.1 -2.52
For window -1 x 3 1.5 1.2 -5.40
90.17 Sqm 623.66 Sqm 56,235.42

92 (BLD- Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened
CSTN- sand including cost and conveyance of all materials like cement, sand, water etc.,
8-3 to site, ,, and all operational, incidental charges on materials and including cost of
Amend all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-
ment in charge etc., and overheads & contractors profit complete for finished item of work.
SoR (SS 901,903 & 904)
2016-
17)

Inside Plastering
For ceiling plastering 1 x 1 6.6 5.5 36.30
36.30 Sqm 469.65 Sqm 17,048.30

93 (BLD- Flooring with polished Shahabad / Tandur stone slabs of 15mm to 18mm thick set
CSTN- over a base coat of CM (1:8) , 12mm thick using screened sand over already laid
9-1) CC bed / RCC roof slab including neat cement slurry of honey like consistency
spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including
cost and conveyance of all materials like cement, sand, water, flooring stones etc.
complete including sales & other taxes on all materials including all labour
charges like dressing of flooring stones to the required size, mixing of cement
mortar, laying, lift charges , cost of base coat, water charges etc., and overheads
& contractors profit complete for finished item of work. (APSS No.703 & 701)

Flooring 1 x 1 6.5 4.5 29.25 Sqm 792.05 Sqm 23,167.46

94 (BLD- Supply & application of one coat water based cement primer of interior grade I
CSTN- and two coats of acrylic emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for internal walls including cost and
Amend conveyance of all materials to site, and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)
For ceiling plastering 1 x 1 6.6 5.5 36.30
For in side Walls 230 mm thick 1 x 1 26.5 3.15 83.48
For shelves Walls 230mm thick 1 x 2 0.6 2.4 2.88
For shelves 2 x 4 3 0.6 14.40
Deductions for Out side Plastering
For Doors -1 x 1 1.2 2.1 -2.52
For window -1 x 3 1.5 1.2 -5.40
129.14 Sqm 221.08 Sqm 28,550.27

95 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)
For Walls 230 mm thick 1 x 1 26.5 3.5 92.75
Add Jambs 0
For Doors 1 x 1 5.2 0.23 1.20
For window 1 x 3 6 0.23 4.14
Deductions
For Doors -1 x 1 1.2 2.1 -2.52
For window -1 x 3 1.5 1.2 -5.40
90.17 Sqm 305.26 Sqm 27,525.29

Page 71 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
96 (BLD- Supply and fixing doors as per drawings with medium teak wood frame of section
CSTN- 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double
13-1) shutters with bond wood solid block board type Core having cross bands and
face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides including cost and conveyance to
site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS
powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop
(IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top,
2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber
bushes including fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in position, fixing the shutter
to the frame etc., including overheads & contractors profit complete for finished
item of work as per APSS 1001 & 1002 (The vertical frame of door shall be
embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)

For Door-1 1 x 1 1.2 2.1 2.52 Sqm 4,194.99 Sqm 10,571.37

97 Providing and fixing of Window with Two Sliding Shutters and with Grill Outer
Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill made of
10mm MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to
12mm x 6 mm MS flat. made of Galvanized Steel (Base Steel as per IS 513, D
quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made
section powder coated with Pure polyester powder upto 50-60 microns thick with
total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for
Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision size
of 90 mm x 50 mm and the Window Shutter section of 0.58 mm x 36 mm and the
outer Frame with two integrated guide tracks of 12mm width and 24mm deep for
provision to slide the Shutter / sash frame and facilitates with a water drain outlet
component made of PVC and the shutter frame fitted with 5mm thick plain float
glass of reputed make and fixed with EPDM weathering seal resistant
accessories and handle made of Alumimium 1 No. per each shutter and cut to
length miter joined with corner brackets including installation of window system at
site using anchor fasteners, Silicon sealant applied at the Outer frame corners
inclusive of conveyance of all materials accessories, labour charges, and erection
at site with complete finished item of work.

windows 1 x 3 1.5 1.2 5.40 Sqm 7,185.01 Sqm 38,799.05

Construction of OAT 300 seating capacity and with stage 37.0 sqm

98 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For OAT step -1 16.20

1 x 1 45.00 0.60 0.60
For OAT step -2 0.60 16.56
1 x 1 46.00 0.60
For OAT step -3 0.60 16.92
1 x 1 47.00 0.60
For OAT step -4 0.60 17.28
1 x 1 48.00 0.60
For OAT step -5 0.60 17.64
1 x 1 49.00 0.60
For OAT step -6 0.60 18.00
1 x 1 50.00 0.60
For OAT step -7 0.90 41.31
1 x 1 51.00 0.90
For OAT side wall from step -1 to step -5 0.90 17.01
1 x 2 10.50 0.90
For stage wall 0.50 11.10
1 x 1 37.00 0.60
For approach steps for stage 0.20 0.80
1 x 2 2.00 1.00
For approach steps for seating area 0.20 3.36
14 x 2 1.20 0.50
176.18 Cum 303.97 Cum 53,553.43
99 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc.,
to site, and including all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15 cm layers finishing top surface
to the required level curing etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

2.70
For OAT step -1 1 x 1 45.0 0.60 0.10
2.76
For OAT step -2 1 x 1 46.0 0.60 0.10
2.82
For OAT step -3 1 x 1 47.0 0.60 0.10
Page 72 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
2.88
For OAT step -4 1 x 1 48.0 0.60 0.10
2.94
For OAT step -5 1 x 1 49.0 0.60 0.10
3.00
For OAT step -6 1 x 1 50.0 0.60 0.10
4.59
For OAT step -7 1 x 1 51.0 0.90 0.10
For OAT side wall from step -1 to step -5 1.89
1 x 2 10.50 0.90 0.10
For stage wall 2.22
1 x 1 37.00 0.60 0.10
For approach steps for stage 0.40
1 x 2 2.00 1.00 0.10
For approach steps for seating area 1.68
14 x 2 1.20 0.50 0.10
For stage floor bed 7.30
1 x 1 73.00 0.10
35.18 Cum 5,374.83 Cum 189,086.52

100 (BLD- Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with
CSTN- fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from
5-17) approved source having minimum crushing strength of 50 Kg/Sqcm. including
cost and conveyance of all materials like cement, sand, bricks, water etc., to
site,and such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, overheads and contractor profit etc.,
complete for finished item of work. (APSS No. 501 & 504).

For OAT step -1 18.23

1 x 1 45.00 0.45 0.90
For OAT step -2 24.84
1 x 1 46.00 0.45 1.20
For OAT step -3 32.78
1 x 1 47.00 0.45 1.55
For OAT step -4 41.04
1 x 1 48.00 0.45 1.90
For OAT step -5 49.61
1 x 1 49.00 0.45 2.25
For OAT step -6 58.50
1 x 1 50.00 0.45 2.60
For OAT step -7 71.15
1 x 1 51.00 0.45 3.10
For OAT side wall from step -1 to step -5 23.63
1 x 2 10.50 0.45 2.50
For stage wall 14.99
1 x 1 37.00 0.45 0.90
For approach steps for stage -1 0.90
1 x 2 2.00 0.90 0.25
For approach steps for stage -2 0.36
1 x 2 2.00 0.60 0.15
For approach steps for stage -3 0.18
1 x 2 2.00 0.30 0.15
For approach steps for seating area 2.52
14 x 2 1.20 0.5 0.15
338.73 cum 7,803.79 cum 2,643,377.79
(BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m
CSTN- in trenches, sides of foundations and basement with initial lead in layers not
2-9) & exceeding 15cm thick, watering and ramming including cost and conveyance of
### Proc.N water to work site and all operational, incidental, labour charges, hire charges of
o.2093 T&P etc., and overheads & contractors profit complete for finished item of work
8 (APSS NO.309&310)
(R&B)/
Dt:14-
stage filling by using excavated Quantity 1 x 1 176.18 176.18

176.18 Cum 43.58 Cum 7,677.92

(BLD- Filling with carted gravel in pathways, trenches, sides of foundations and
CSTN- basement with initial lead in layers not exceeding 15cm thick, watering and
2-8) & ramming including cost and conveyance of water to work site and all operational,
### Proc.N incidental, labour charges, hire charges of T&P etc., and overheads & contractors
o.2093 profit complete for finished item of work(APSS NO.309&310)
8
(R&B)/
Dt:14-
Gravel filling between steps 1&2 1 x 1 46.00 1.20 0.60 33.12
Gravel filling between steps 2&3 1 x 1 47.00 1.20 0.95 53.58
Gravel filling between steps 3&4 1 x 1 48.00 1.20 1.30 74.88
Gravel filling between steps 4&5 1 x 1 49.00 1.20 1.65 97.02
Gravel filling between steps 5&6 1 x 1 50.00 1.20 2.00 120.00
Gravel filling between steps 6&7 1 x 1 51.00 1.20 2.20 134.64
513.24 Cum 547.79 Cum 281,147.74

Page 73 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
103 (BLD- Plastering 20mm thick in two coats using screened sand with base coat of 16mm
CSTN- thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge
8-9) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work .(SS 901,903 &
904)

For OAT step -1 20.25

1 x 1 45.00 0.45
For OAT step -2 20.70
1 x 1 46.00 0.45
For OAT step -3 21.15
1 x 1 47.00 0.45
For OAT step -4 21.60
1 x 1 48.00 0.45
For OAT step -5 22.05
1 x 1 49.00 0.45
For OAT step -6 22.50
1 x 1 50.00 0.45
For OAT step -7 132.60
1 x 1 51.00 2.60
For OAT side wall from step -1 to step -5 27.30
1 x 2 10.50 1.30
For stage wall 20.35
1 x 1 37.00 0.55
For approach steps for seating area 15.12
14 x 2 1.2 0.45
323.62 sqm 608.95 sqm 197,068.40
(BLD- Providing 0.5 wide Coping with 16 to 18mm thick High Polished granite up to 8'-
CSTN- 00 (2.43 M) other than black and regular colours with borders and design as per
9-7) the pattern approved by the Engineer-in-Charge , set over base coat of cement
mortar (1:5) , 12mm thick using screened sand over the stone ,Brick masonry or
CC bed already laid , including neat grey cement slurry of honey like consistency
spread 3.3 Kg per sqm and jointed neatly with white cement paste mixed with
104 pigment of matching shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to work site and all
operational, incidental labour & lift charges, half rounding the edges of treads ,
polishing charges and cost of base coat and overheads & contractors profit
complete for finished item of work for Coping (S.S.701 & special)

For OAT step -1 22.50

1 x 1 45.00 0.50
For OAT step -2 23.00
1 x 1 46.00 0.50
For OAT step -3 23.50
1 x 1 47.00 0.50
For OAT step -4 24.00
1 x 1 48.00 0.50
For OAT step -5 24.50
1 x 1 49.00 0.50
For OAT step -6 25.00
1 x 1 50.00 0.50
For OAT step -7 25.50
1 x 1 51.00 0.50
For OAT side wall from step -1 to step -5 10.50
1 x 2 10.50 0.50

178.50 Sqm 5,147.74 Sqm 918,871.59

105 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)

For OAT step -1 1 x 1 45.00 0.45 20.25

For OAT step -2 1 x 1 46.00 0.45 20.70

For OAT step -3 1 x 1 47.00 0.45 21.15

For OAT step -4 1 x 1 48.00 0.45 21.60

For OAT step -5 1 x 1 49.00 0.45 22.05

For OAT step -6 1 x 1 50.00 0.45 22.50

For OAT step -7 1 x 1 51.00 2.60 132.60

For OAT side wall from step -1 to step -5 1 x 2 10.50 1.30 27.30

For stage wall 1 x 1 37.00 0.55 20.35

For approach steps for seating area 14 x 2 1.20 0.45 15.12

323.62 Sqm 305.26 Sqm
98,788.24

Page 74 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
106 (BLD- Flooring with 16 to 18mm thick high polished / Flame Finished / leather finished
CSTN- granite stone slabs other than black and regular colours (i.e. of shades like
9-7) paradise / bala flower / copper silk / laka red / lavender blue) with borders and
design as per the pattern approved by the Engineer-in-Charge of length not less
than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using
screened sand over CC bed already laid or RCC roof slab including neat grey
cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching shade to full
depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges,
polishing charges and cost of base coat and overheads & contractors profit
complete for finished item of work (S.S.701 & special)

For stage flooring 73.00

1 x 1 73.00
73.00 Sqm 4,186.05 Sqm 305,581.65
107 (BLD- Providing Treads with 16 to 18mm thick high polished / Flame Finished / leather
CSTN- finished granite stone slabs other than black and regular colour granite with
9-7) borders and design as per the pattern approved by the Engineer-in-Charge of
length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm
thick using screened sand over CC bed already laid or RCC roof slab including
neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of matching shade to
full depth including cost and conveyance of all materials like cement , sand ,
water , granite slabs etc., to work site and all operational, incidental labour & lift
charges, half rounding the edges of treads , polishing charges and cost of base
coat and overheads & contractors profit complete for finished item of work for
Treads (S.S.701 & special)

For approach steps for stage 1 x 2.0 2.0 0.3 1.20

For approach steps for seating area 14 x 2.0 1.2 0.3 10.08
11.28 Sqm 5,256.89 Sqm 59,297.72
108 (BLD- Providing Risers to steps walls with 16 to 18mm thick high polished / Flame
CSTN- Finished / leather finished granite stone slabs other than black and regular colour
9-7) granite with length equal to flooring stone, set over base coat of CM(1:5) 12 mm
thick using screened sand with cement slurry of honey like consistency spread at
the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., and overheads & contractors profit complete for
finished item of work. for Risers-0.15 m(APSS No.701 &707)

For approach steps for stage 1 x 2.0 2.0 0.10 0.40

For approach steps for seating area 14 x 2.0 1.2 0.10 3.36
3.76 Sqm 4,330.43 Sqm 16,282.42

Construction of Green room at OAT size of 3.7 m X 2.70 m - 2 No's

109 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For RCC Column Footings 1 x 6 1.50 1.50 1.8 24.30

For Basement wall 1 x 1 20.00 0.6 0.6 7.20
31.50 Cum 303.97 Cum 9,575.06
110 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc.,
to site, and including all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15 cm layers finishing top surface
to the required level curing etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

For RCC Column Footings 1 x 6 1.5 1.5 0.1 1.35

For Basement wall 1 x 1 20.00 0.6 0.1 1.20
For Floor bed 1 x 2 3.70 2.7 0.1 2.00
4.55 Cum 5,374.83 Cum 24,455.48
111 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand)
using hard granite stones carted from approved quarry including cost and
conveyance of all materials like cement, screened sand, water,Rough stone
( BLD- Through stone, Coursed stones etc., from approved quarry, to site, including
CSTN-6- labour charges for cutting stones to required size and shape, mixing, of cement,
13 ) mortar, construction, curing, charges for scaffolding etc., and overheads &
contractors profit complete for finished item of work. (APSS No. 601 & 615)

For Basement wall 1 x 1 20.00 0.45 0.6 5.40

5.40 Cum 5,284.02 Cum 28,533.71

Page 75 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
112 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 1 x 6 1.20 1.20 0.3 2.59 Cum 10,619.61 Cum 27,504.79
For Pedastal 1 x 6 0.45 0.45 0.9 1.09 Cum 11,298.80 Cum 12,315.69
For Plinth beam 1 x 1 20.00 0.30 0.3 1.80 Cum 13,436.4 Cum 24,185.43

113 (BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m
CSTN- in trenches, sides of foundations and basement with initial lead in layers not
2-9) & exceeding 15cm thick, watering and ramming including cost and conveyance of
Proc.N water to work site and all operational, incidental, labour charges, hire charges of
o.2093 T&P etc., and overheads & contractors profit complete for finished item of work
8 (APSS NO.309&310)
(R&B)/
Dt:14-
5-2019 50% of Excavated Quantity 1 x 0.5 31.50 15.75
15.75 Cum 43.58 Cum 686.39
114 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-B) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

For RCC Columns 1 x 6 0.23 0.30 3.20 1.32

1.32 Cum 13,330.45 Cum 17,596.19
Lintel beam for doors-1 1 x 2 1.20 0.23 0.15 0.08
Lintel beam for Window-1 1 x 2 1.50 0.23 0.15 0.10
0.18 Cum 13,128.67 Cum 2,363.16
115 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-C) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies , Bamboos , Wooden Reapers , Runners ,
Wood Posts , Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, , curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

Beam 1 x 1 20.00 0.23 0.30 1.38

1.38 Cum 11,452.05 Cum 15,803.83
Slab 125 mm thick 1.0 x 2.0 3.7 2.7 19.98
19.98 sqm 1,395.81 sqm 27,888.28
116 (BLD- Reinforced Cement Concrete Nominal Mix M 20 grade corresponding to IS 456
CSTN- with minimum cement content of 350 kgs per 1 cum of concrete using
3-13-C) CONCRETE MIXER with using 12mm size hard granite machine crushed graded
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of
concrete including cost and conveyance of all materials like cement, fine
aggregate (Sand), coarse aggregate, water etc., to site including steel centring,
shuttering, labour charges such as ,Concrete machine mixing, laying concrete,
lift charges, curing etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.

25mm thick shelves : 3 x 4 3.0 0.6 21.60

21.60 sqm 294.41 sqm 6,359.26
117 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR forming grills for reinforcement work as per approved designs and drawings,
2011- including cost and conveyance of steel bars, including all wastages such as
12 overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
page wire, cover blocks and all incidental, operational, labour charges such as cutting,
No. 392 bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 1.73 70.00 kg/Cum 121.10

For Pedastal 1 x 1 0.73 70.00 kg/Cum 51.10
For Plinth beam 1 x 1 1.08 100.0 kg/Cum 108.00
Columns 1 x 1 0.97 100.0 kg/Cum 97.00
Page 76 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Lintel beam 1 x 1 0.09 70.0 kg/Cum 6.30
beams 1 x 1 0.83 100.0 kg/Cum 83.00
slab 125 mm thick 1 x 1 2.00 70.00 kg/Cum 140.00
25mm thick shelves : 1 x 1 0.54 70.00 kg/Cum 37.80
644.30 Kgs 95.91 Kgs 61,794.81
118 (BLD- Providing impervious coat to exposed RCC roof slab surfaces to required slopes
CSTN- with CM (1:3) prop. using screened sand 20mm thick (average) mixed with
10-25) integral cement water proofing liquid confirming to IS: 2645-2003 manufactured
by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one
bag of cement, laid over roof slab when it is green, finished smooth with a floating
coat of neat cement and thread lining at regular intervals of 45cmx45cm including
cost and conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, , and operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread lining, curing
including rounding off junctions of wall and slab etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 901 & 903).

Roof 1 x 2.0 3.7 2.7 19.98

19.98 Sqm 622.86 Sqm 12,444.74

119 (BLD- Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement :
CSTN- Screened sand) using common burnt clay bricks of class as per Table- I of
5-5) IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved
source having minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks, water etc., to site,
, and such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 501 & 504).

For Walls 230mm thick 1 x 1 20.00 0.23 3.00 13.80

For shelves Walls 230mm thick 1 x 6 0.60 0.23 2.40 1.99
Deductions
Lintel beam for doors -1 x 2 1.20 0.23 0.15 -0.08
Lintel beam for Window -1 x 2 1.50 0.23 0.15 -0.10
For Doors -1 x 2 0.90 0.23 2.1 -0.87
For windows -1 x 2 1.20 0.23 1.20 -0.66
14.08 Cum 8,392.32 Cum 118,163.87
120 ( BLD- Plastering 12mm thick in two coats using screened sand with base coat of 8mm
CSTN- thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge
8-10) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer - in - charge etc., and
overheads & contractors profit complete for finished item of work. (SS 901,903 &
904)

For in side Walls 230 mm thick 1 x 1 20 3.15 63.00

For shelves Walls 230mm thick 2 x 6 0.60 2.40 17.28
For shelves 3 x 4 3.00 0.60 21.60
Deductions for Out side Plastering
For Doors -1 x 2 0.90 2.10 -3.78
For window -1 x 2 1.20 1.2 -2.88
95.22 Sqm 598.04 Sqm 56,945.37

121 (BLD- Plastering 20mm thick in two coats using screened sand with base coat of 16mm
CSTN- thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge
8-9) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work .(SS 901,903 &
904)

For Walls 230 mm thick 1 x 1 20.00 3.45 69.00

Add Jambs
For Doors 1 x 1 4.90 0.23 1.13
For window 1 x 1 4.80 0.23 1.10
Deductions for Out side Plastering
For Doors -1 x 1 0.90 2.10 -1.89
For window -1 x 1 1.20 1.2 -1.44
67.90 Sqm 623.66 Sqm 42,346.51

122 (BLD- Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened
CSTN- sand including cost and conveyance of all materials like cement, sand, water etc.,
8-3 to site, ,, and all operational, incidental charges on materials and including cost of
Amend all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-
ment in charge etc., and overheads & contractors profit complete for finished item of work.
SoR (SS 901,903 & 904)
2016-
17)

Inside Plastering
For ceiling plastering 1 x 2.0 3.7 2.7 19.98
19.98 Sqm 469.65 Sqm 9,383.61

Page 77 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
123 (BLD- Flooring with 16 to 18mm thick high polished / Flame Finished / leather finished
CSTN- granite stone slabs other than black and regular colours (i.e. of shades like
9-7) paradise / bala flower / copper silk / laka red / lavender blue) with borders and
design as per the pattern approved by the Engineer-in-Charge of length not less
than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using
screened sand over CC bed already laid or RCC roof slab including neat grey
cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching shade to full
depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges,
polishing charges and cost of base coat and overheads & contractors profit
complete for finished item of work (S.S.701 & special)

Flooring 1 x 2 3.7 2.7 19.98 Sqm 4,186.05 Sqm 83,637.28

124 (BLD- Supply & application of one coat water based cement primer of interior grade I
CSTN- and two coats of acrylic emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for internal walls including cost and
Amend conveyance of all materials to site, and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)
For ceiling plastering 1 x 2 3.7 2.7 19.98
For in side Walls 230 mm thick 1 x 1 20 3.15 63.00
For shelves Walls 230mm thick 2 x 6 0.6 2.4 17.28
For shelves 3 x 4 3.00 0.60 21.60
Deductions for Out side Plastering
For Doors -1 x 2 0.9 2.1 -3.78
For window -1 x 2 1.2 1.2 -2.88
115.20 Sqm 221.08 Sqm 25,468.42

125 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)
For Walls 230 mm thick 1 x 1 20 3.45 69.00
Add Jambs
For Doors 1 x 1 4.9 0.23 1.13
For window 1 x 1 4.8 0.23 1.10
Deductions for Out side Plastering
For Doors -1 x 1 0.9 2.1 -1.89
For window -1 x 1 1.2 1.2 -1.44
67.90 Sqm 305.26 Sqm 20,727.15
126 (BLD- Supply and fixing doors as per drawings with medium teak wood frame of section
CSTN- 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick single
13-1) shutter with bond wood solid block board type Core having cross bands and face
veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply
with internal lipping on all sides including cost and conveyance to site of teak
wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of
size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated
fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681)
300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150
mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including
fixing the fixtures to door with required number of screws, bolt and nuts including
labour charges for fixing the frame in position, fixing the shutter to the frame etc,
including overheads & contractors profit complete for finished item of work as per
APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a
depth of not less than 10 mm) (900mm x 2100mm)

For Doors 1 x 2 0.9 2.1 3.78 Sqm 4,589.54 Sqm 17,348.46

127 As per Providing and fixing of Window with Two Sliding Shutters and with Grill Outer
data Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill made of
10mm MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to
12mm x 6 mm MS flat. made of Galvanized Steel (Base Steel as per IS 513, D
quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made
section powder coated with Pure polyester powder upto 50-60 microns thick with
total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for
Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision size
of 90 mm x 50 mm and the Window Shutter section of 0.58 mm x 36 mm and the
outer Frame with two integrated guide tracks of 12mm width and 24mm deep for
provision to slide the Shutter / sash frame and facilitates with a water drain outlet
component made of PVC and the shutter frame fitted with 5mm thick plain float
glass of reputed make and fixed with EPDM weathering seal resistant
accessories and handle made of Alumimium 1 No. per each shutter and cut to
length miter joined with corner brackets including installation of window system at
site using anchor fasteners, Silicon sealant applied at the Outer frame corners
inclusive of conveyance of all materials accessories, labour charges, and erection
at site with complete finished item of work.

For windows 1 x 2 1.2 1.2 2.88 Sqm 7,185.01 Sqm 20,692.83

Construction of Toilet block at OAT size of 10 m X 3.70 m

Page 78 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
128 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For RCC Column Footings 1 x 10 1.50 1.50 1.5 33.75

For basement wall 1 x 1 31.30 0.6 0.6 11.27
45.02 Cum 303.97 Cum 13,684.73
129 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc.,
to site, and including all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15 cm layers finishing top surface
to the required level curing etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

For RCC Column Footings 1 x 10 1.5 1.5 0.1 2.25

For basement wall 1 x 1 31.30 0.60 0.1 1.88
For floor bed 1 x 1 10.50 3.7 0.1 3.89
8.02 Cum 5,374.83 Cum 43,106.14
130 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand)
using hard granite stones carted from approved quarry including cost and
conveyance of all materials like cement, screened sand, water,Rough stone
( BLD-
CSTN-6- Through stone, Coursed stones etc., from approved quarry, to site, including
13 ) labour charges for cutting stones to required size and shape, mixing, of cement,
mortar, construction, curing, charges for scaffolding etc., and overheads &
contractors profit complete for finished item of work. (APSS No. 601 & 615)

For Basement wall 1 x 1 31.30 0.45 0.5 7.04

7.04 Cum 5,284.02 Cum 37,199.50
131 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 1 x 10 1.20 1.20 0.3 4.32 Cum 10,619.61 Cum 45,876.72
For Pedastal 1 x 10 0.60 0.60 1.1 3.96 Cum 11,298.80 Cum 44,743.25
For Plinth beam 1 x 1 31.30 0.30 0.3 2.82 Cum 13,436.35 Cum 37,890.51

132 (BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m
CSTN- in trenches, sides of foundations and basement with initial lead in layers not
2-9) & exceeding 15cm thick, watering and ramming including cost and conveyance of
Proc.N water to work site and all operational, incidental, labour charges, hire charges of
o.2093 T&P etc., and overheads & contractors profit complete for finished item of work
8 (APSS NO.309&310)
(R&B)/
Dt:14- Excavated Quantity 1 x 1 45.02 45.02
45.02 Cum 43.58 Cum 1,961.97
133 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-B) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

For RCC Columns 1 x 10 0.30 0.30 3.00 2.70

2.70 Cum 13,330.45 Cum 35,992.22
Lintel beam for doors-1 1 x 2 1.50 0.23 0.23 0.16
Lintel beam for doors-2 1 x 2 5.00 0.1 0.15 0.15
0.31 Cum 13,128.67 Cum 4,069.89
134 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-C) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies , Bamboos , Wooden Reapers , Runners ,
Wood Posts , Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, , curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

Beam 1 x 1 39.00 0.3 0.30 3.51

3.51 Cum 11,452.05 Cum 40,196.70
Slab 125 mm thick 1 x 1 10.5 3.7 38.85
38.85 sqm 1,395.81 sqm 54,227.22

Page 79 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
135 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR forming grills for reinforcement work as per approved designs and drawings,
2011- including cost and conveyance of steel bars, including all wastages such as
12 overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
page wire, cover blocks and all incidental, operational, labour charges such as cutting,
No. 392 bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 4.32 70.00 kg/Cum 302.40

For Pedastal 1 x 1 3.96 70 kg/Cum 277.20
For Plinth beam 1 x 1 2.82 100 kg/Cum 282.00
Columns 1 x 1 2.70 100.00 kg/Cum 270.00
Lintel beam 1 x 1 0.31 70.00 kg/Cum 21.70
beams 1 x 1 3.51 100.00 kg/Cum 351.00
Slab 125 mm thick 1 x 1 4.86 70.00 kg/Cum 339.94
1844.24 Kgs 95.91 Kgs 176,881.06
136 (BLD- Providing impervious coat to exposed RCC roof slab surfaces to required slopes
CSTN- with CM (1:3) prop. using screened sand 20mm thick (average) mixed with
10-25) integral cement water proofing liquid confirming to IS: 2645-2003 manufactured
by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one
bag of cement, laid over roof slab when it is green, finished smooth with a floating
coat of neat cement and thread lining at regular intervals of 45cmx45cm including
cost and conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, , and operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread lining, curing
including rounding off junctions of wall and slab etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 901 & 903).

slab 1 x 1 10.5 3.7 38.85

38.85 Sqm 622.86 Sqm 24,198.11

137 (BLD- Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement :
CSTN- Screened sand) using common burnt clay bricks of class as per Table- I of
5-5) IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved
source having minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks, water etc., to site,
, and such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 501 & 504).

For Walls 230mm thick 1 x 1 31.30 0.23 3.00 21.60

Deductions
Lintel beam for doors-1 -1 x 2 1.5 0.23 0.23 -0.16
For doors-1 -1 x 2 1.2 0.23 2.1 -1.16
For ventilaters -1 x 12 0.60 0.23 0.60 -0.99
19.29 Cum 8,392.32 Cum 161,887.85
138 (BLD- Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop.
CSTN- (Cement : Screened sand) using common burnt clay bricks of class as per Table-
5-12) I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from
approved source having minimum crushing strength of 40 Kg/Sq.cm and placing
2 Nos. of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls where applicable
including cost and conveyance of all materials like cement, steel, sand, bricks,
water etc., to site, ,, all operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing masonry, lift charges,
curing, etc., and overheads & contractors profit but excluding cost of steel and its
fabrication charges complete for finished item of work. (APSS No. of 501 & 509)

For Walls 115 mm thick 1 x 4 1.40 2.15 12.04

For Walls 115 mm thick Parapet Wall 1 x 1 29.00 0.30 8.70
For Walls 115 mm thick Urinal partision 1 x 3 0.90 1.80
4.86
wall
Deductions
for doors-2 -1 x 8 0.75 2.1 -12.60
Lintel beam for doors-2 -1 x 2 5 0.15 -1.50
11.50 Sqm 1,154.61 Sqm 13,278.02
139 (BLD- Plastering 20mm thick in two coats using screened sand with base coat of 16mm
CSTN- thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge
8-9) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work .(SS 901,903 &
904)

Out side Plastering

For out side Wall 1 x 1 31.30 3.00 93.90
For out side 115 mm thick Parapet Wall 1 x 2 29.00 0.35 20.30

Inside wall Plastering

For inside Wall 1 x 1 39.00 0.90 35.10
Add Jambs
For Doors-1 1 x 2 5.40 0.23 2.48
For ventilaters 1 x 12 2.1 0.23 5.80
Deductions for Out side Plastering
Page 80 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For doors-1 -1 x 2 1.2 2.1 -5.04
For ventilaters -1 x 12 0.6 0.6 -4.32
148.22 Sqm 623.66 Sqm 92,438.89

140 (BLD- Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened
CSTN- sand including cost and conveyance of all materials like cement, sand, water etc.,
8-3 to site, ,, and all operational, incidental charges on materials and including cost of
Amend all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-
ment in charge etc., and overheads & contractors profit complete for finished item of work.
SoR (SS 901,903 & 904)
2016-
17) Inside Plastering
For ceiling plastering 1 x 1 10.50 3.70 38.85
38.85 Sqm 469.65 Sqm 18,245.90

141 (BLD- Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and
CSTN- thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS:
9-6) 13630(Part 1 to 15) of any colour and finish in all shades and designs as
approved by Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or RCC roof slab,
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm
& jointed neatly with white cement paste to full depth mixed with pigment of
matching shade, including cost of all materials like cement, screened sand , water
and tiles etc., and overheads & contractors profit complete for finished item of
work. (APSS No.701 & 707)

Flooring 1 x 1 10.50 3.70 38.85 Sqm 1,088.14 Sqm 42,274.24

142 (BLD- Providing dadooing to walls with glazed full body ceramic tiles of any size and
CSTN- thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712, IS:
9-18) 13630(Parts 1 to 15) of any colour and finish in all shades and designs with
borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12
mm thick using screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed
with pigment of matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors profit complete
for finished item of work.

Inside wall
For Walls 230mm thick 1 x 1 31.30 2.30 71.99
For Walls 115 mm thick 2 x 4 1.4 2.15 24.08
For Walls 115 mm thick Urinal partision 2 x 3 0.9 1.8 9.72
wall
Deductions for Out side Plastering
For doors-1 -1 x 2 1.2 2.1 -5.04

For doors-2 -2 x 8 0.75 2.1 -25.20

75.55 Sqm 753.56 Sqm 56,931.46

143 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)

For ceiling plastering 1 x 1 10.5 3.7 38.85

For out side 115 mm thick Parapet Wall 1 x 2 29 0.35 20.30

For out side Wall 1 x 1 31.3 3 93.90

For inside Wall 1 x 1 39 0.9 35.10

Add Jambs
For Doors-1 1 x 2 5.4 0.23 2.48
For ventilaters 1 x 12 2.1 0.23 5.80

Deductions for Out side Plastering

For doors-1 -1 x 2 1.2 2.1 -5.04

For ventilaters -1 x 12 0.6 0.6 -4.32

187.07 Sqm 305.26 Sqm 57,104.99

144 (BLD- Supply and fixing doors as per drawings with medium teak wood frame of section
CSTN- 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double
13-1) shutters with bond wood solid block board type Core having cross bands and
face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides including cost and conveyance to
site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS
powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop
(IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top,
2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber
bushes including fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in position, fixing the shutter
to the frame etc., including overheads & contractors profit complete for finished
item of work as per APSS 1001 & 1002 (The vertical frame of door shall be
embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)

Page 81 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For Door-1 1 x 2 1.20 2.00 4.80 Sqm 4,194.99 Sqm 20,135.95

145 As per Supply and fixing of toilet door shutter with frame made of M.S. door frame of
Data 5mmX48mmX48mm (L angel) as allround frame the frame is coated with one
coat of red oxide and two coats of enamel of approved color. For shutter and the
shutter is made with 16mm Bison Lam shutter with allround ‘U’ Lipping of PPS
section of 12mmX18mmX12mmX0.60mm, along hardware of 200m long and
12mm dia aluminum aldrop( ISI make)2 Nos, 2Nos of 125m m handle, 3 Nos of
RT patte hinges IS 304gr SS 2mmX12mmX180mm long with a pole receiver of
10mmDia X 40mm by welded on 3mmX40mm SS 304, plate it works as receiver
for RT Patee hinges it is welded to M.S. angle . M.S. angle will be fixed to wall of
self expandable screws and caps. including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site with templates for
casement sizing overheads and contractors profit etc., complete for finished item
of work (750mm x 2100mm )

For Door-2 1 x 8 0.75 2.10 12.60 Sqm 4,658.22 Sqm 58,693.57

146 As per Providing, supplying & fixing of Single fixed Louvers Ventilator made made of
Data prepainted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS
277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns
thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm,
section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to
have rebate for glazed shutter with a provision for guard bars/grills and the
sections cut to length metre joined with corner bracket, centre mullion fixed with
mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of
with MS Powder coated /SS ball bearing butt Hinges provided per shutter and
windows fitted with 4 mm thick plain float glass with rubber gaskets including
fixing the frames in concrete/masonry wall by means of self expanding screws,
Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for
finished item of work. including cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site, overheads and contractor profit
etc., complete for finished item of work
Fixed louvers Ventilators 1 x 12 0.60 0.6 4.32
4.32 Sqm 4,615.04 Sqm 19,936.97

147 As per Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-
Data Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make
plastic seat and lid for European water closets with rubber or plastic Buffers as
per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with
internal components and fixed using required size of nails and screws, angle stop
cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections
with brass union nuts CP coated including cost and conveyance of all materials to
site, overheads & contractors profit etc., complete for finished item of work for all
floors.

For Toilets 1 x 4 4.00

4.00 Nos 5,668.25 Nos 22,673.00
148 As per Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet
Data- 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI
40 marked and providing masonry seat, CC squatting plate and 10 litres capacity
single flush PVC low level cistern with internal components fixed on 2 Nos. of
teak wood blocks of size 76.20mm x 101.60mm using required size of nails,
screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first
quality Indian make heavy duty, 12.70mm PVC connection with brass union nuts
CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall
be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at
the joint etc., complete including cost and conveyance of all materials to site, cost
of CC bed, labour charges and seigniorage charges, overheads & contractors
profit etc., complete for finished item of work.

For Toilets 1 x 4 4.00

4.00 Nos 4,868.00 Nos 19,472.00
149 As per Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality
Data conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal
size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted
with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make
heavy duty complete with standard CI brackets including wooden blocks ,1
No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock
12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible
waste pipe 914.4mm length of 1st quality including cost and conveyance of all
materials to site, labour charges , overheads & contractors profit for finished item
of work

For Toilets 1 x 4 4.00

4.00 Nos 2,771.07 Nos 11,084.28
150 As per Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm
Data x 315 mm with integral flushing rim fixed with screws complete Indian make
(HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-
charge, including supply and fixing 12.7mm PVC connection with brass plumber
union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75
mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost
and conveyance of all materials to site, labour charges , overheads & contractors
profit complete for finished item of work for all floors.

For Toilets 1 x 8 8.00

8.00 Nos 1,523.80 Nos 12,190.40

Construction of Toilet block size of 5.50 m X 3.70 m

151 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

Page 82 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For RCC Column Footings 1 x 6 1.50 1.50 1.5 20.25
For basement wall 1 x 1 22.10 0.6 0.6 7.96
28.21 Cum 303.97 Cum 8,574.99
152 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc.,
to site, and including all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15 cm layers finishing top surface
to the required level curing etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

For RCC Column Footings 1 x 6 1.5 1.5 0.1 1.35

For basement wall 1 x 1 22.10 0.60 0.1 1.33
For floor bed 1 x 1 5.50 3.7 0.1 2.04
4.72 Cum 5,374.83 Cum 25,369.20
153 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand)
using hard granite stones carted from approved quarry including cost and
conveyance of all materials like cement, screened sand, water,Rough stone
( BLD-
CSTN-6- Through stone, Coursed stones etc., from approved quarry, to site, including
13 ) labour charges for cutting stones to required size and shape, mixing, of cement,
mortar, construction, curing, charges for scaffolding etc., and overheads &
contractors profit complete for finished item of work. (APSS No. 601 & 615)

For Basement wall 1 x 1 22.10 0.45 0.5 4.97

4.97 Cum 5,284.02 Cum 26,261.58
154 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-A) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site
and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No. 402)

For Footings 1 x 6 1.20 1.20 0.3 2.59 Cum 10,619.61 Cum 27,504.79
For Pedastal 1 x 6 0.60 0.60 1.1 2.38 Cum 11,298.80 Cum 26,891.14
For Plinth beam 1 x 1 22.10 0.30 0.3 1.99 Cum 13,436.35 Cum 26,738.34

155 (BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m
CSTN- in trenches, sides of foundations and basement with initial lead in layers not
2-9) & exceeding 15cm thick, watering and ramming including cost and conveyance of
Proc.N water to work site and all operational, incidental, labour charges, hire charges of
o.2093 T&P etc., and overheads & contractors profit complete for finished item of work
8 (APSS NO.309&310)
(R&B)/
Dt:14- Excavated Quantity 1 x 1 28.21 28.21
28.21 Cum 43.58 Cum 1,229.39
156 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-B) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

For RCC Columns 1 x 6 0.30 0.30 3.00 1.62

1.62 Cum 13,330.45 Cum 21,595.33
Lintel beam for doors-1 1 x 2 1.50 0.23 0.23 0.16
Lintel beam for doors-2 1 x 2 2.30 0.1 0.15 0.07
0.23 Cum 13,128.67 Cum 3,019.59
157 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of
3-13-C) concrete using CONCRETE MIXER with 20mm size HBG graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site
and , centring using Casurina Ballies , Bamboos , Wooden Reapers , Runners ,
Wood Posts , Wall Plates etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete manually, laying concrete,
vibrator, , curing , overheads & contractors profit etc., complete but excluding cost
of steel and its fabrication charges for finished item of work (APSS No. 402)

Beam 1 x 1 22.10 0.3 0.30 1.99

1.99 Cum 11,452.05 Cum 22,789.58
Slab 125 mm thick 1 x 1 6 4.2 25.20
25.20 sqm 1,395.81 sqm 35,174.41

Page 83 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
158 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR forming grills for reinforcement work as per approved designs and drawings,
2011- including cost and conveyance of steel bars, including all wastages such as
12 overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
page wire, cover blocks and all incidental, operational, labour charges such as cutting,
No. 392 bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 2.59 70.00 kg/Cum 181.30

For Pedastal 1 x 1 2.38 70 kg/Cum 166.60
For Plinth beam 1 x 1 1.99 100 kg/Cum 199.00
Columns 1 x 1 1.62 100.00 kg/Cum 162.00
Lintel beam 1 x 1 0.23 70.00 kg/Cum 16.10
beams 1 x 1 1.99 100.00 kg/Cum 199.00
Slab 125 mm thick 1 x 1 3.15 70.00 kg/Cum 220.50
1144.50 Kgs 95.91 Kgs 109,769.00
159 (BLD- Providing impervious coat to exposed RCC roof slab surfaces to required slopes
CSTN- with CM (1:3) prop. using screened sand 20mm thick (average) mixed with
10-25) integral cement water proofing liquid confirming to IS: 2645-2003 manufactured
by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one
bag of cement, laid over roof slab when it is green, finished smooth with a floating
coat of neat cement and thread lining at regular intervals of 45cmx45cm including
cost and conveyance of all materials like cement, sand, water proofing
compound, water etc., to site, , and operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth and thread lining, curing
including rounding off junctions of wall and slab etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 901 & 903).

slab 1 x 1 6 4.2 25.20

25.20 Sqm 622.86 Sqm 15,696.07

160 (BLD- Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement :
CSTN- Screened sand) using common burnt clay bricks of class as per Table- I of
5-5) IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved
source having minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks, water etc., to site,
, and such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 501 & 504).

For Walls 230mm thick 1 x 1 22.10 0.23 3.00 15.25

Deductions
Lintel beam for doors-1 -1 x 2 1.5 0.23 0.23 -0.16
For doors-1 -1 x 2 1.2 0.23 2.1 -1.16
For ventilaters -1 x 6 0.60 0.23 0.60 -0.50
13.43 Cum 8,392.32 Cum 112,708.86
161 (BLD- Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop.
CSTN- (Cement : Screened sand) using common burnt clay bricks of class as per Table-
5-12) I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from
approved source having minimum crushing strength of 40 Kg/Sq.cm and placing
2 Nos. of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls where applicable
including cost and conveyance of all materials like cement, steel, sand, bricks,
water etc., to site, ,, all operational, incidental charges such as labour charges for
mixing cement mortar, scaffolding charges, constructing masonry, lift charges,
curing, etc., and overheads & contractors profit but excluding cost of steel and its
fabrication charges complete for finished item of work. (APSS No. of 501 & 509)

For Walls 115 mm thick 1 x 2 1.40 2.15 6.02

For Walls 115 mm thick Parapet Wall 1 x 1 20.40 0.30 6.12
Deductions
for doors-2 -1 x 4 0.75 2.1 -6.30
Lintel beam for doors-2 -1 x 2 2.3 0.15 -0.69
5.15 Sqm 1,154.61 Sqm 5,946.24
162 (BLD- Plastering 20mm thick in two coats using screened sand with base coat of 16mm
CSTN- thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge
8-9) finishing including cost and conveyance of all materials like cement, sand, water
etc., to site, ,, and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges,
curing, including cutting grooves as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work .(SS 901,903 &
904)

Out side Plastering

For out side Wall 1 x 1 22.10 3.00 66.30
For out side 115 mm thick Parapet Wall 1 x 2 20.40 0.35 14.28

Inside wall Plastering

For inside Wall 1 x 1 22.10 0.90 19.89
Add Jambs
For Doors-1 1 x 2 5.40 0.23 2.48
For ventilaters 1 x 6 2.1 0.23 2.90
Deductions for Out side Plastering
For doors-1 -1 x 2 1.2 2.1 -5.04

Page 84 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
For ventilaters -1 x 6 0.6 0.6 -2.16
98.65 Sqm 623.66 Sqm 61,524.06

163 (BLD- Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened
CSTN- sand including cost and conveyance of all materials like cement, sand, water etc.,
8-3 to site, ,, and all operational, incidental charges on materials and including cost of
Amend all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-
ment in charge etc., and overheads & contractors profit complete for finished item of work.
SoR (SS 901,903 & 904)
2016-
17) Inside Plastering
For ceiling plastering 1 x 1 6.00 4.20 25.20
25.20 Sqm 469.65 Sqm 11,835.18

164 (BLD- Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and
CSTN- thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS:
9-6) 13630(Part 1 to 15) of any colour and finish in all shades and designs as
approved by Engineer-in-charge, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or RCC roof slab,
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm
& jointed neatly with white cement paste to full depth mixed with pigment of
matching shade, including cost of all materials like cement, screened sand , water
and tiles etc., and overheads & contractors profit complete for finished item of
work. (APSS No.701 & 707)

Flooring 1 x 1 5.50 3.70 20.35 Sqm 1,088.14 Sqm 22,143.65

165 (BLD- Providing dadooing to walls with glazed full body ceramic tiles of any size and
CSTN- thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712, IS:
9-18) 13630(Parts 1 to 15) of any colour and finish in all shades and designs with
borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12
mm thick using screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed
with pigment of matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors profit complete
for finished item of work.

Inside wall
For Walls 230mm thick 1 x 1 22.10 2.30 50.83
For Walls 115 mm thick 2 x 2 1.4 2.15 12.04
Deductions for Out side Plastering
For doors-1 -1 x 2 1.2 2.1 -5.04

For doors-2 -2 x 4 0.75 2.1 -12.60

45.23 Sqm 753.56 Sqm 34,083.52

166 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-
12)

For ceiling plastering 1 x 1 6 4.2 25.20

For out side 115 mm thick Parapet Wall 1 x 2 20.4 0.35 14.28

For out side Wall 1 x 1 22.1 3 66.30

For inside Wall 1 x 1 22.1 0.9 19.89

Add Jambs
For Doors-1 1 x 2 5.4 0.23 2.48
For ventilaters 1 x 6 2.1 0.23 2.90

Deductions for Out side Plastering

For doors-1 -1 x 2 1.2 2.1 -5.04

For ventilaters -1 x 6 0.6 0.6 -2.16

123.85 Sqm 305.26 Sqm 37,806.45

167 (BLD- Supply and fixing doors as per drawings with medium teak wood frame of section
CSTN- 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double
13-1) shutters with bond wood solid block board type Core having cross bands and
face veneers, hot pressed bonded with water proof phenol formaldehyde
synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides including cost and conveyance to
site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS
powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop
(IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top,
2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber
bushes including fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in position, fixing the shutter
to the frame etc., including overheads & contractors profit complete for finished
item of work as per APSS 1001 & 1002 (The vertical frame of door shall be
embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)

For Door-1 1 x 2 1.20 2.00 4.80 Sqm 4,194.99 Sqm 20,135.95

Page 85 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
168 As per Supply and fixing of toilet door shutter with frame made of M.S. door frame of
Data 5mmX48mmX48mm (L angel) as allround frame the frame is coated with one
coat of red oxide and two coats of enamel of approved color. For shutter and the
shutter is made with 16mm Bison Lam shutter with allround ‘U’ Lipping of PPS
section of 12mmX18mmX12mmX0.60mm, along hardware of 200m long and
12mm dia aluminum aldrop( ISI make)2 Nos, 2Nos of 125m m handle, 3 Nos of
RT patte hinges IS 304gr SS 2mmX12mmX180mm long with a pole receiver of
10mmDia X 40mm by welded on 3mmX40mm SS 304, plate it works as receiver
for RT Patee hinges it is welded to M.S. angle . M.S. angle will be fixed to wall of
self expandable screws and caps. including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site with templates for
casement sizing overheads and contractors profit etc., complete for finished item
of work (750mm x 2100mm )

For Door-2 1 x 4 0.75 2.10 6.30 Sqm 4,658.22 Sqm 29,346.79

169 As per Providing, supplying & fixing of Single fixed Louvers Ventilator made made of
Data prepainted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS
277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns
thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm,
section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to
have rebate for glazed shutter with a provision for guard bars/grills and the
sections cut to length metre joined with corner bracket, centre mullion fixed with
mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of
with MS Powder coated /SS ball bearing butt Hinges provided per shutter and
windows fitted with 4 mm thick plain float glass with rubber gaskets including
fixing the frames in concrete/masonry wall by means of self expanding screws,
Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for
finished item of work. including cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site, overheads and contractor profit
etc., complete for finished item of work
Fixed louvers Ventilators 1 x 6 0.60 0.6 2.16
2.16 Sqm 4,615.04 Sqm 9,968.49

170 As per Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-
Data Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make
plastic seat and lid for European water closets with rubber or plastic Buffers as
per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with
internal components and fixed using required size of nails and screws, angle stop
cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections
with brass union nuts CP coated including cost and conveyance of all materials to
site, overheads & contractors profit etc., complete for finished item of work for all
floors.

For Toilets 1 x 2 2.00

2.00 Nos 5,668.25 Nos 11,336.50
171 As per Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet
Data- 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI
40 marked and providing masonry seat, CC squatting plate and 10 litres capacity
single flush PVC low level cistern with internal components fixed on 2 Nos. of
teak wood blocks of size 76.20mm x 101.60mm using required size of nails,
screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first
quality Indian make heavy duty, 12.70mm PVC connection with brass union nuts
CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall
be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at
the joint etc., complete including cost and conveyance of all materials to site, cost
of CC bed, labour charges and seigniorage charges, overheads & contractors
profit etc., complete for finished item of work.

For Toilets 1 x 2 2.00

2.00 Nos 4,868.00 Nos 9,736.00
172 As per Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality
Data conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal
size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted
with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make
heavy duty complete with standard CI brackets including wooden blocks ,1
No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock
12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible
waste pipe 914.4mm length of 1st quality including cost and conveyance of all
materials to site, labour charges , overheads & contractors profit for finished item
of work

For Toilets 1 x 4 4.00

4.00 Nos 2,771.07 Nos 11,084.28

Civil works for fixing children play Equipment 10-No's in 300 sqm area with
Sand filling and Construction of toe wall around play area-70 m
173 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN- sump, compound wall in ordinary soils and depositing on bank with an initial lead
2-1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For brick wall around the play area 1 x 1 70.00 0.45 0.45 14.18
Pedestals for 12 No's play Equipment 1 x 60 0.60 0.60 0.75 16.20
30.38 Cum 303.97 Cum 9,234.61

Page 86 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
174 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
3-5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

For brick wall around the play area 1 x 1 70.00 0.45 0.10 3.15
Pedestals for 12 No's play Equipment 1 x 60 0.60 0.60 0.10 2.16
5.31 Cum 5,374.83 Cum 28,540.35
175 (BLD- Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with
CSTN- fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from
5-17) approved source having minimum crushing strength of 50 Kg/Sqcm. including cost
and conveyance of all materials like cement, sand, bricks, water etc., to site,and
such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, overheads and contractor profit etc.,
complete for finished item of work. (APSS No. 501 & 504).

For brick wall around the play area 1 X 1 70.0 0.23 0.50 8.05
8.05 Cum 7,803.79 Cum 62,820.51
176 (BLD- Plastering 12mm thick single coat in CM(1:5) using screened sand including cost
CSTN- and conveyance of all materials like cement, sand, water etc., to site and all
8-3 operational, incidental charges on materials and including cost of all labour
Amend charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc.,
ment in and overheads & contractors profit complete for finished item of work.(SS 901,903
SoR
& 904)
2016-17
)
For brick wall around the play area 1 X 1 70 0.50 35.00
35.00 Sqm 439.78 Sqm 15,392.30
177 (BLD- Supply & application of one coat water based cement primer of exterior grade II
CSTN- and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amend conveyance of all materials to site,and all operational, incidental, labour charges
ment in etc., and overheads & contractors profit complete for finished item of work in all
SoR
floors.
2011-
12)
For brick wall around the play area 1 X 1 70.0 0.27 18.90
18.90 Sqm 305.26 Sqm 5,769.41
Providing 0.30 m wide Coping with Polished black Kadapa slabs minimum of 25
mm to 30 mm thick in single piece as specified set over a base coat of CM (1:5) ,
12mm thick using screened sand over already laid CC bed / RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm
and jointed with neat cement to full depth including cost and conveyance of all
(BLD-
materials like cement, sand, water, flooring stones etc. complete including all
178 CSTN-
9-1) labour charges like dressing of flooring stones to the required size, flat nosing the
edges, mixing of cement mortar, laying, lift charges , cost of base coat, water
charges etc., and overheads & contractors profit complete for finished item of work
(APSS No.703 & 701)

For brick wall around the play area 1 X 1 70 0.3 21.00

21.00 Sqm 954.71 Sqm 20,048.91
179 (BLD- Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete MIXER,
CSTN- 20mm size hard granite machine crushed graded metal (coarse aggregate - as per
3-13-C) IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concrete , including cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate,
water etc., to site including steel centring, shuttering, machine mixing, lift
charges, laying concrete, vibrating, curing, overheads & contractors profit etc.,
complete for finished item of work (APSS No. 402 & 403)

Pedestals for 12 No's play Equipment 1 x 60 0.50 0.50 0.60 9.00

9.00 Cum 7,953.39 Cum 71,580.51
180 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated
CSTN- (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for
4.2)& RCC works , including labour charges for straightening, cutting, bending to
Amend required sizes and shapes, placing in position with cover blocks of approved
ment in materials and size and tying and lap-splicing with binding wire of 18 SWG,
SoR
forming grills for reinforcement work as per approved designs and drawings,
2011-12
page including cost and conveyance of steel bars, including all wastages such as
No. 392 overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as cutting,
bending, placing in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

Pedestals for 12 No's play Equipment 1 x1 9.00 60.0 kg/cum 540.00

540.00 Kg 95.91 Kg 51,791.40

Page 87 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
181 (BLD- Filling with carted coarse sand in play area, pathway, foundations bed and
CSTN- basement with initial lead in layers not exceeding 15cm thick, watering and
2-8) & ramming including cost and conveyance of water to work site and all operational,
Proc.No incidental ,labour charges, hire charges of T&P etc., and overheads & contractors
.20938 profit complete for finished item of work(APSS NO.309&310)
(R&B)/
Dt:14-5-
2019

For Children play area 1 x 1 Err:509 Err:509 0.30 Err:509

Err:509 Cum 1,218.63 Cum Err:509

Conventional Play Equipment ( 10 - Nos) 1 -Set

182 Supply, Delivery, Installation and Commissioning of 1.5m x 2.2m size of FOUR
SEATER SWING of Arihant/ Equivalent make including transportation,
installation, commissioning, loading and unloading etc., for complete finished
item of the work.

1.Swing leg pipe : 40NB hot dip galvanized swing leg pipe of length 2300mm
conforming to IS 1239 with GI thickness up to 60µ.

2. Top pipe : Four Seater swing top fixed to 50NB Galvanized pipe having C
Class material of length 1490mm at the center and two junction box frame at the
ends to attach leg pipes.

3. Junction box : 225mmx103mm junction box made from 5mm thick GI plate to
house the two swing leg pipes & top pipe.

4. Seat frame: side frame consist of Rectangular tube having 50X25X4 mm thick.
20NB bend pipe used for seat frame support. 40NB bend is used for Entry Support
structure.

5. Bearing Assembly: Shaft for UCP 207 Bearing is self-lubricated made of SKF
make shall be provided for smooth & trouble-free movement.

6. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of
TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239
(Part 1) with GI thickness not less than 60micron.

7. Powder coating:- It shall be done with pure polyester raw material. Dry film
thickness maintained within the range of 50-70 microns. It is tested for adhesion
test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.

8. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts /
Nylon Lock Nuts are used with PVC Bolt Caps.

9. All open ends of pipe been closed by GI caps for user safety against entrapment.

10. Certificate: ISO9001:2015

11. Color: Multicolor for optional or customized & As per RAL shade.

12. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and
3rd is Stretch wrap.
Cost of the Equipment 1.00 No 36225.00 Each 36225.00
183 Supply, Delivery, Installation and Commissioning of 6.5m x 1.5m size of FOUR
SEATER ARC SWING of Arihant/ Equivalent make including transportation,
installation, commissioning, loading and unloading etc., for complete finished item
of the work.

Page 88 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
1. Arc swimg frame: 6000mm long 80NB Pipe bent in Single Piece & welded
together with a flange 5mm thick & ISA of 40x40x5mm to form a strong frame at
bottom & middle. The 80NB pipe is hot dip galvanized pipe conforming to IS 1239
with GI thickness of 60µ. Height of the frame is 2700mm.

2. Top pipe : 50NB Top Pipe with two Arc Swing Flanges welded at both its ends.
Pipe can withstanding torsional stress created due to swinging motion. These
50NB top pipe is hot dip galvanized pipe of length 2950mm conforming to IS 1239
with GI thickness of 60µ.

3. Seat assembly :
a) Swing clamp assembly: Swing clamps made up of two parts are joined together
with M6 Allen bolts along with S-Hook & a specially designed swing pin.The S-
Hook is specially designed to house a bearing for smooth & noiseless swinging.
The clamps are made from injection molded Nylon-6 plastic.
b) Chain : Rubber dip molded swing chain of dia. 6mm & 1450mm Long.
c) Hook: S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304.
d) Seat: Rubber Seat made by Natural Rubber with sufficient reinforcement.

4. Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be

provided for smooth & trouble-free movement.

5. Pins and Circlips: 12mm diameter pins shall be made from EN8 material &
Circlip A10.
6. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of
TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239
(Part 1) with GI thickness not less than 60micron.

7. Powder coating:- It shall be done with pure polyester raw material. Dry film
thickness maintained within the range of 50-70 microns. It is tested for adhesion
test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.

8. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts /
Nylon Lock Nuts are used with PVC Bolt Caps.
9. All open ends of pipe been closed by GI caps for user safety against entrapment.

10. Certificate: ISO9001:2015

11. Color: Multicolor for optional or customized & As per RAL shade.
12. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and
3rd is Stretch wrap.
Cost of the Equipment 2.00 No 80101.00 Each 160202.00
184 Supply, Delivery, Installation and Commissioning of4.3m x 2.4m size of S'
BRIDGE LADDER SCRAMBLER of Arihant/ Equivalent make including
transportation, installation, commissioning, loading and unloading etc., for
complete finished item of the work.

1. S-Bridge top frame: Two ISF 50x10, 500mm long conforming to IS 1730-1961
welded in between two 25NB hot dip galvanized bend pipe 2300mm & 3810mm
long respectively conforming to IS 1239. The ISF 50x5, 130mm long 4nos. with
holes is welded to bend pipes for fixing the support pipes. The 20NB GI pipes
400mm long 17nos. equally spaced are welded between two bend pipes.

2. Support Pipe: 40NB hot dip galvanized pipe 2550mm long conforming to IS
1239 with 150x150x5mm GI base plate & 130mm long ISF 50x10 conforming to
IS 1730- 1961 welded at the bottom & top ends of pipe respectively

3. Ladder Frame: ISF 50x10, 500mm long conforming to IS 1730-1961 & ISA
25x25x5 conforming to IS 808-1964 welded in between two 40NB hot dip
galvanized pipe 2550mm long conforming to IS1239. The four 25NB GI pipes
400mm long equally spaced at 300mm forming ladder steps are welded between
two pipes.

4. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of
TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239
(Part 1) with GI thickness not less than 60micron.

Page 89 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
5. Powder coating:- It shall be done with pure polyester raw material. Dry film
thickness maintained within the range of 50-70 microns. It is tested for adhesion
test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.

6. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts /
Nylon Lock Nuts are used with PVC Bolt Caps.
7. All open ends of pipe been closed by GI caps for user safety against entrapment.

8. Certificate: ISO9001:2015
9. Color: Multicolor for optional or customized & As per RAL shade.
10. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and
3rd is Stretch wrap.

Cost of the Equipment 1.00 No 36242.00 Each 36242.00

185 supply, delivery and commissioning of FRP Deluxe Wave Slide of 7 feet height,
10' length and 20'' width of Arihant / Equivalent make including transportation,
installation, commissioning, loading and unloading in complete finished item of
the work.

1. Supporting Main Pipes for platform:- 80NB hot dip galvanized pipe of length
2400mm conforming to IS 1239 with GI thickness up to 60µ.

2. FRP Wave Slide:- Wave Slide chute is made up of FRP of lenght 10' and width
20''. The chute has its end such as it causes safe landing of the child. The landing
portion is horizontal with respect to the ground. The centre of the slide is supported
by stand made up of 50NB pipe and 5mm thich MS plate and landing of the slide
is supported by stand made up of 25NB pipe and 5mm thick MS plate with GI
plating.

3. Platform:-
a. Material:- MS Plate with anti-skid surface on top.
b. Thickness:- Minimum thickness of 5 mm.
c. Shape:- Square.
d. Brazing Frame:- ISA 25x25x5mm or ISA40x40x5mm thick and ISF 40x5mm
thick which is galvanized and then duly Powder Coated.
e. Vertical Pipes:- 80NB GI pipes should be used of Heavt Duty ('C' Class) of
TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239
(Part 1) with GI thickness not less than 60micron.

4. Ladder: - The ladder is made up of with required size and thickness of L angle/
cirular pipes with necessary supporting steps and suitable railing over the platform
& for ladder as per the safety norms.

5. FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics

(FRP) materials are processed by the hand laid process which is considered to be
the best of its type. International quality of Gel coats which is duly mixed with U.V
stabilized pigment to give the required color to the product. Thickness of the FRP
material should not less than 5 mm as per the product. The FRP material should be
tested for abrasion resistance & UTS (ultimate tensile test).

6. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of
TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239
(Part 1) with GI thickness not less than 60micron.

7. Powder coating:- It shall be done with pure polyester raw material. Dry film
thickness maintained within the range of 50-70 microns. It is tested for adhesion
test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.

8. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts /
Nylon Lock Nuts are used with PVC Bolt Caps.

9. All open ends of pipes been closed by GI caps for user safety against
entrapment.
10. Certificate: ISO9001:2015
11. Color: Multicolor for optional or customized & As per RAL shade.

Page 90 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
12. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and
3rd is Stretch wrap.

Cost of the Equipment 2 Nos 65000.00 Each 130,000.00

186 Supply, delivery and commissioning of Four seated See Saw of 8 feet length, 4'
width and 1'6'' hieght of Arihant / Equivalent make including transportation,
installation, commissioning, loading and unloading in complete finished item of
the work.

1. Centre Main Frame Structure:- 80NB hot dip galvanized pipes conforming to
IS 1239.
2. See saws:- 2 Nos of See saws made up of 80NB GI pipe conforming to IS 1239
with proper holdings.
3. FRP Seats: - 4 nos. of FRP Seats
4. FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics
(FRP) materials are processed by the hand laid process which is considered to be
the best of its type. International quality of Gel coats which is duly mixed with U.V
stabilized pigment to give the required color to the product. Thickness of the FRP
material should not less than 5 mm as per the product. The FRP material should be
tested for abrasion resistance & UTS (ultimate tensile test).

5. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of
TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239
(Part 1) with GI thickness not less than 60micron.

6. Powder coating:- It shall be done with pure polyester raw material. Dry film
thickness maintained within the range of 50-70 microns. It is tested for adhesion
test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.

7. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts /
Nylon Lock Nuts are used with PVC Bolt Caps.
8. All open ends of pipes been closed by GI caps for user safety against
entrapment.
9. Certificate: ISO9001:2015
10. Color: Multicolor for optional or customized & As per RAL shade.
11. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and
3rd is Stretch wrap.

Cost of the Equipment 1 Nos 36000.00 Each 36,000.00

187 Supply, delivery and commissioning of 6' length, 6' width and 8' height of SELF
JULA with 4inch square box section made up of MS 'C' class of 6.00 mm
thickness material of TATA/JINDAL make for main frame and for cross supports
for jointing main frame and horizontal at top and 50mm dia of MS C Class of
4.50mm thickness pipes of TATA/JINDAL make for other supporting structures
for hanging jhula with the help of specially designed ISI certified bearings and
providing seats with suitable material with seating capacity of 6 to 8 persons at a
time and two coats of Anti-Corrosive primer & two coats Auto-motive spray paint
of approved make as a matt finishing as directed by the engineer in-charge
including transportation, installation, commissioning, loading and un loading etc.,
complete with all bolts and nuts for finished item of the work excluding cost of
civil works.

Cost of the Equipment 1 Nos 110000.00 Each 110,000.00

Page 91 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
188 Supply, delivery and commissioning of 10' length, 8' width and 8' height of
MULTIPLE SPECIAL SWINGS with 4inch square box section made up of MS
'C' class of 6.00 mm thickness material of TATA/JINDAL make for main frame
and 6” C - channel fabricated as square box for crass bar and 50mm dia of MS C
Class of 4.50mm thickness pipes of TATA/JINDAL make for hanging 3 nos of
swings with the help of specially designed ISI certified bearings and providing
seats with suitable material with seating capacity of 2 persons in each swing and
two coats of Anti-Corrosive primer & two coats Auto-motive spray paint of
approved make as a matt finishing as directed by the engineer in-charge including
transportation, installation, commissioning, loading and un loading etc., complete
for finished item of the work excluding cost of civil works.

1 Nos 105000.00 105,000.00

189 Supply, Delivery, Installation and Commissioning of 2.5m x 1.5m size of NET
ROCK SCRAMBLER of Arihant/ Equivalent make including transportation,
installation, commissioning, loading and unloading in complete finished item of
the work.

1. Pad: Rock climber 7Ft. pad made from Fiber Reinforced Plastic (FRP) attached
to the angular frame. The pad is provided with rock shaped part ergonomically
spaced in zig-zag manner for climbing act.The rocks are bolted on same platform,
with a gradient of 65 degree from the ground.

2. Supports: Bend angular frame made from 40NB Galvanized pipe conforming to
IS 1239:1979 with base plates fixed on each end and grounded for strong
foundation.It has Ø12 U-hook on one side for attaching rope.It has profile plate for
top support. and has plate 130x50x5 for bottom support.

3.Top pipe: It is made from 40NB top pipe of 1190mm long with Dia. 12 U-
Hooks fixed on one side.
4. Rope: Rope size conforming to standards EN11761:1998 for minimum grip
requirement. It is size of Ø18 of nylon.Mesh size conforming to standards
EN1176-1:1998& ASTM - F1487:07a for safety against entrapment of head &
neck

5. Clamp: Its is made from nylon. nylon rope attached by specially designed nylon
rope clamps used which has rope integrated inside which hold it tightly and avoids
breaking

6. Bottom pipe: It is made from 40NB bottom pipe of 1190mm long with Dia. 12
U-Hooks fixed on one side.
7. Rock: It is made from Fiber Reinforced Plastic (FRP).
8. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of
TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239
(Part 1) with GI thickness not less than 60micron.

9. FRP (FIBER REINFORCED PLASTIC): All the Fiber Reinforced Plastics

(FRP) materials are processed by the hand laid process which is considered to be
the best of its type. International quality of Gel coats which is duly mixed with U.V
stabilized pigment to give the required color to the product. Thickness of the FRP
material varies from 3 mm to 5 mm as per the product. The FRP material should be
tested for abrasion resistance & UTS (ultimate tensile test).

10. Powder coating:- It shall be done with pure polyester raw material. Dry film
thickness maintained within the range of 50-70 microns. It is tested for adhesion
test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.

Page 92 of 333
 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
11. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts /
Nylon Lock Nuts are used with PVC Bolt Caps.
12. All open ends of pipe been closed by GI caps for user safety against
entrapment.
13. Certificate: ISO9001:2015
14. Color: Multicolor for optional or customized & As per RAL shade.
15. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and
3rd is Stretch wrap.

Cost of the Equipment 1.00 No 56668.00 Each 56,668.00

190
Err:509 Err:509

191

Provision for MEP works for Water Cascade fountain work Providing, fixing,
testing & commissioning of Nozzles , Lights ,Filter Pumps, Pool fittings ,
Wires/cables of various sizes including necessary accessories , uPVC pipes ,
Valves, fittings etc of required size , Boarding and Ladging and Installation,
Chlorine Dosing Unit as required complete as per the direction of Engineer- 200,000.00
in-charge and including cost of all materials to site, incidental operational
and all labour charges overheads & contractors profit etc., complete for
finished item of work

192
193 Provision for renovation of existing Compound wall & ticket counter 1,000,000.00
194 Provision for minimum external electrification 300,000.00
195 For drainage and irrigation facilities 250,000.00
Total -III Err:509
Total= I+II+III Err:509
Add GST @12% on Total Err:509
Add seigniorage Charges @ 0.6% on Total Err:509
Add unforeseen items Err:509
Grand Total Err:509
#NAME?

Page 93 of 333
 A.P. Greening and Beautification Corporation

Name of the Work :- Detailed estimate for Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra
Pradesh. ( AMRUT 2.0 )

( Estimate prepared as per SOR 22-23) Estimate Cost: Rs.185.00 Lakhs

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Hardscape (Civil works)

Jungle Clearing and level grading- 5376 Sqm

Clearing thin jungle growth ( more than 50 percent open space )

including bushes upto 30 cm / parthenium and other weeds including
burning or disposing off the same as directed etc., complete and it
1 IRR-PMW-1- including all operational, incidental, labour charges, required tools,
1 overheads & contractors profit complete for finished item of work

Cleaning along the bund

by Manula Means
1 x 1 200.0 12.00
2400.00
Cleaning along the bund
by Manula Means 1 x 1 120.0 12.00
1440.00
Deduct 70% of thick
jungle -1 x 1 3840.0
-2688.00
Deduct 10% for voids -1 x 1 1152.0 -115.20
1036.80 Sqm 3.05 Sqm 3,162.24
Clearing thick jungle growth ( less than 50 percent open space )
including bushes upto 30 cm / parthenium and other weeds including
2 IRR-PMW-1- burning or disposing off the same as directed etc., complete.and it
2 including all operational, incidental, labour charges, required tools,
overheads & contractors profit complete for finished item of work

Cleaning along the bund

by Manula Means 1 x 1 200.0 12.00
2400.00
Cleaning along the bund
by Manula Means 1 x 1 120.0 12.00
1440.00
Deduct 30% of thick
jungle -1 x 1 3840.0
-1152.00
Deduct 10% for voids
-1 x 1 2688.0
-268.80
2419.20 Sqm 4.72 Sqm 11,418.62
Clearing and grubbing the land including uprooting wild vegetation,
grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal
of stumps of such trees cut earlier and disposal of unserviceable
materials and stacking of serviceable material to be used or auctioned,
3 RBR-STCL-2 upto a lead of 1000 m including removal and disposal of top organic soil
not exceeding 150 mm in thickness as per Technical Specification Clause
201 MORD / MORTH. By Mechanical Means

Cleaning along the bund

by Manula Means 1 x 1 200.0 12.00
2400.00
Cleaning along the bund
by Manula Means 1 x 1 120.0 12.00
1440.00
Dedect 50% for voids
-1 x 1 3840.0
-1920.00
1920.00 Sqm 2.57 Sqm 4,934.40

CC kerb along the pathways

Page 94 of 333
Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Earth work excavation for foundations (Manual Means) of buildings,

septic tank, sump, compound wall in ordinary soils and depositing on
bank with an initial lead of 10m and depth up to 3m including all
4 (BLD-CSTN- operational, incidental, labour charges such as shoring, sheeting,
2-1) planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70

For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb inside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb inside 1 x 1 21.00 0.30 0.30 1.89
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 30.00 0.30 0.30 2.70
For CC kerb outside 1 x 1 10.77 0.30 0.30 0.97
For fencingpoles 1 x 115 0.45 0.45 0.55 12.80
Pedestals for 10 No's 1 x 28 0.75 0.75 0.75
Gym Equipment 11.81

For brick toe wall 1 x 1 58.00 0.30 0.30 5.22

For Floor Bed 1 x 1 19.00 10.00 0.10 19.00
94.89 Cum 303.97 Cum 28,843.71
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse
aggregate) for foundations and under flooring bed using 162.0 kgs of
cement, coarse aggregate 40mm size hard , machine crushed granite
from approved quarry including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc., to site, and including all
5 (BLD-CSTN- charges for machine mixing, laying concrete in foundations and under
3-5) flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete
for finished item of work. (APSS No. 402)

For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90

For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb inside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb inside 1 x 1 21.00 0.30 0.10 0.63
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 30.00 0.30 0.10 0.90
For CC kerb outside 1 x 1 10.77 0.30 0.10 0.32
For fencing poles 1 x 115 0.45 0.45 0.10 2.32
Pedestals for 10 No's 1 x 28 0.75 0.75 0.10
Gym Equipment 1.58
For brick toe wall 1 x 1 58 0.3 0.10 1.74
For Floor Bed 1 x 1 19 10 0.10 19.00
39.99 Cum 5,374.83 Cum 214,939.45

Page 95 of 333
Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Supply and fixing of C.C. Kerb not less than M30 strength of size 600 X
400 X 110 mm thick with bottom thickness of 110 mm up to height of
350 mm and top width of 50 mm thick chamfering with 45° at starts at
350 mm height to 400 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC Bed in
position to the required line, level and curvature jointed with cement
mortar 1:3 (1 cement : 3 coarse sand), including making joints with or
without grooves (thickness of joints except at sharp curve shall not to
6 (CPWD-II- more than 5 mm), including making drainage opening wherever required
16.69) and including cost and conveyance of all materials & labour charges
including transportation from approved source, loading & unloading
charges including contractor profit & overhead charges complete for
finished item of work..

For CC kerb inside 1 x 1 30.00 30.00

For CC kerb inside 1 x 1 30.00 30.00
For CC kerb inside 1 x 1 30.00 30.00
For CC kerb inside 1 x 1 30.00 30.00
For CC kerb inside 1 x 1 30.00 30.00
For CC kerb inside 1 x 1 30.00 30.00
For CC kerb inside 1 x 1 30.00 30.00
For CC kerb inside 1 x 1 30.00 30.00
For CC kerb inside 1 x 1 21.00 21.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 30.00 30.00
For CC kerb outside 1 x 1 10.77 10.77

511.77 Rmt 540.78 Rmt 276,754.98

Supply and fabrication of MS framed structure like Window Grills,
Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain
link mesh works, Roof Trusses by using square / rectangular MS hollow
section as per IS 4923 & Angles as per SP:6(1) IS Hand book, including
cost of welding rods, power charges, labour charges for cutting, placing,
7 As per Data welding and erecting in position and fixing, cost & convenience of all
materials including wastage to site and complete for finished item of
work

For fencing poles of

50x50x2.9mm thick MS 1 x 104 2.30 239.20 Rmt
hollow section @ 4.12
Kg/Rmt
For Supporting poles of
50x50x2.9mm thick MS 1 x 11 2.30 25.30 Rmt
hollow section @ 4.12
Kg/Rmt
@ 4.12 kg per meter 4.12 264.50 1089.73 Kgs
MS Angle of size 1 x 1 260 260.00 Rmt
25x25x5mm for angle
track
@ 1.18 kg per meter 1.18 260.00 306.80 Kgs

12mm square bar for 2 x 115 0.15 34.50 Rmt

hold fast @ 1.13 Kg/Rmt

@ 1.13 kg per meter 1.13 34.50 38.98 Kgs

1435.51 Kgs 127.14 Kgs 182,510.74

Painting to new iron work with one coat of Red oxide primer and two
coats with synthetic enamel paint Grade-I VOC (Volatile Organic
Compound) content less than 50 grams/litre over primer coat of red
oxid, including cost and conveyance of all materials like Red oxide
primer, Synthetic Enamel Paint to site, incidental, operational and all
8 As per Data labour charges etc., and overheads & contractors profit complete for
finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Page 96 of 333
Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

For fencing poles of

50x50x2.9mm thick MS 1 x 104 1.80 0.20 37.44 sqm
hollow section @ 4.12
Kg/Rmt
For Supporting poles of
50x50x2.9mm thick MS 1 x 11 1.80 0.20 3.96 sqm
hollow section @ 4.12
Kg/Rmt
MS Angle of size 1 x 2 260
25x25x5mm for angle 0.05 26.00 sqm
track

flats 1 x 104 1.80 0.05 9.36 sqm

76.76 sqm 221.26 sqm 16,983.63
(BLD-CSTN- Filling with carted gravel in pathways, trenches, sides of foundations and
2-8) & basement with initial lead in layers not exceeding 15cm thick, watering
Proc.No.209 and ramming including cost and conveyance of water to work site and all
38 (R&B)/ operational, incidental, labour charges, hire charges of T&P etc., and
9 Dt:14-5- overheads & contractors profit complete for finished item of work(APSS
2019 NO.309&310)

for pitching work 1 x 1 20.5 4.93 0.20 20.19

for pitching work 1 x 1 15.75 5.00 0.20 15.75
for pitching work 1 x 1 12 5.00 0.20 12.00
for pitching work 1 x 1 14.3 5.45 0.20 15.59
for pitching work 1 x 1 12.85 5.90 0.20 15.16
for pitching work 1 x 1 12.2 5.90 0.20 14.40
for pitching work 1 x 1 11.5 5.83 0.20 13.40
for pitching work 1 x 1 14 6.05 0.20 16.21
for pitching work 1 x 1 20.5 5.70 0.20 23.37
for pitching work 1 x 1 15 4.90 0.20 14.70
for pitching work 1 x 1 15 4.60 0.20 13.80
for pitching work 1 x 1 15 4.65 0.20 13.95
for pitching work 1 x 1 16 5.00 0.20 16.00
for pitching work 1 x 1 14.68 5.30 0.20 15.56
` for pitching work 1 x 1 15 5.10 0.20 15.30
for pitching work 1 x 1 17 4.95 0.20 16.83
for pitching work 1 x 1 11.2 4.85 0.20 10.86
for pitching work 1 x 1 10.47 4.85 0.20 10.16
273.23 Cum 547.79 Cum 149,672.66
Desilting of Lake - 838 cum

Excavation in all kinds of soil including boulders upto 0.3 m diameter for
canal, seating of embankment, filter drains / catch water drains etc.,
including dressing bed and sides to required level and profile, cost of all
materials, machinery, labour, placing the excavated soil neatly in dump
area or for the formation of service road / embankment as directed etc.,
complete with initial lead upto 1 km and all lifts. including all
10 (IRR-CAW-1- operational, incidental, labour charges etc., and overheads &
1)
contractors profit complete for finished item of work.

1 x 1 18.70 20.00 0.40 149.60

1 x 1 19.40 19.50 0.40 151.32
1 x 1 18.90 18.50 0.40 139.86
1 x 1 25.00 16.00 0.40 160.00
1 x 1 18.40 18.50 0.40 136.16
1 x 1 18.40 13.75 0.40 101.20
838.14 Cum 140.26 Cum 117,557.52

Page 97 of 333
Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Civil works for fixing Outdoor fitness equipment's 10-No's (1 sets) in

190 sqm area. & Civil works for fixing children play Equipment 10-
No's (1 sets) in 300 sqm area with Sand filling.

11 (BLD- Masonry work in CM(1:6) prop (Cement : Screened sand) in

CSTN-5-17) superstructure with fly ash cement / lime solid blocks of size 290mm x
225mm x 140mm from approved source having minimum crushing
strength of 50 Kg/Sqcm. including cost and conveyance of all materials
like cement, sand, bricks, water etc., to site,and such as labour charges,
like mixing cement mortar, scaffolding charges, constructing masonry,
lift charges, curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).

For brick toe wall 1 x 1 58 0.23 0.35 4.67

4.67 Cum 7,803.79 Cum 36,443.70
12 (BLD- Plastering 12mm thick single coat in CM(1:5) using screened sand
CSTN-8-3 including cost and conveyance of all materials like cement, sand, water
Amendment etc., to site and all operational, incidental charges on materials and
in SoR including cost of all labour charges for mixing mortar, finishing, curing
2016-17 ) as directed by Engineer-in-charge etc., and overheads & contractors profit
complete for finished item of work.(SS 901,903 & 904)

For brick toe wall 1 x 2 58.0 0.35 40.60

40.60 Sqm 439.78 Sqm 17,855.07
13 Supply & application of one coat water based cement primer of exterior
(BLD- grade II and two coats of acrylic exterior emulsion paint having VOC
CSTN-12- (Volatile Organic Compound) content less than 50 grams/litre for exterior
2& walls including cost and conveyance of all materials to site,and all
Amendment operational, incidental, labour charges etc., and overheads & contractors
in SoR profit complete for finished item of work in all floors.
2011-12)

For brick toe wall 1.0 x 1.0 58.0 0.35 20.30

For CC kerb outside 1 x 1 511.77 0.30 153.53
173.83 Sqm 305.26 Sqm 53,063.92
14 (BLD- Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete
CSTN-3-13- MIXER, 20mm size hard granite machine crushed graded metal (coarse
C) aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry, using a minimum quantity of 350 kgs. of cement per 1
cum of concrete , including cost and conveyance of all materials like
cement, fine aggregate (Sand), coarse aggregate, water etc., to site
including steel centring, shuttering, machine mixing, lift charges, laying
concrete, vibrating, curing, overheads & contractors profit etc., complete
for finished item of work (APSS No. 402 & 403)

Pedestals for 10 No's

Gym Equipment 1 x 28 0.75 0.75 0.65 10.24
For Floor Bed 1 x 1 19.00 10.00 0.05 9.50
19.74 Cum 6,425.10 Cum 126,831.47
15 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo
CSTN- Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-
4.2)& 1979) of different diameters for RCC works , including labour charges
Amendment for straightening, cutting, bending to required sizes and shapes, placing in
in SoR position with cover blocks of approved materials and size and tying and
2011-12 lap-splicing with binding wire of 18 SWG, forming grills for
page No. reinforcement work as per approved designs and drawings, including cost
392 and conveyance of steel bars, including all wastages such as overlaps,
couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as
cutting, bending, placing in position, tying including overheads &
contractors profit complete for finished item of work.( APSS No.126)

For Gym Equipment 10

1 x 28 25.00 kg 700.00
No
For Floor Bed 1 x 9.50 kg
25.00 237.50
937.50 Kg 95.91 Kg 89,915.63
Softscape

Page 98 of 333
Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth,

refilling with red garden soil including cost of red garden soil and
farmyard manure at 4:1 ratio, internal transportation of plants, planting
etc., including the application of fertilizers and pesticides etc.,(@ 20
gms/pit/sqmt) and it including all operational, incidental, labour
charges, required tools, overheads & contractors profit complete for
finished item of work, but excluding the cost of the fertilizers (@ 20
gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 5
16 As per Data No./Sqm of plants & bag size shall be arrived based on the spacing 0.45
c/c as per the design.)(Red garden soil in this context it is defined as
sandy loamy garden soil congenial for plant growth which shall be of
light textured, crystalline, porous and friable, fertile, slightly acidic or
neutral).

Shrub / Hedge planting 1x 1 186.00 1.00 186.00

in 0.45 m trench

Total 186.00 Sqm 719.64 Sqm 133,853.04

Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once
in a month) it including all operational, incidental, labour charges for
17 As per Data complete of work, for one month maintenance.

Shrub / Hedge planting 186.00

in 0.45 m trench 1 x 1 186.00 Sqm 100Sq/
month
186.00 Sqm 472.50 878.85
Maintenance of hedge/shrub planting: Edge cutting 0.30mtr. away from
the edges/shrub (once in a month) and application of fertilizers,
insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by
manually excluding cost of fertilizers it including all operational,
18 As per Data incidental, labour charges, for complete of work. for one month
maintenance.

Shrub / Hedge planting 186.00

in 0.45 m trench 1 x 1 186.00 Sqm 100Sq/
month
186.00 Sqm 464.10 863.23
Maintenance of hedge/shrub planting: watering once in 2 days @ 5
Lts/per sqmt shall be provide to maintain sub soil moisture continuously
by manually excluding cost of wateri ncluding all operational,
19 As per Data incidental ,labour charges for complete of work.. for one month
maintenance.

Shrub / Hedge planting 186.00

in 0.45 m trench 1 x 1 186.00 Sqm 100Sq/
month
186.00 Sqm 787.50 1,464.75
Digging of 0.75x0.75x0.75 mtrs. pit, filling with soil mixture of red garden
soil, farmyard manure at 4:1 ratio including internal transport,
application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal
transportation of plants, planting the plants etc., and it including all
operational, incidental, labour charges, required tools, overheads &
contractors profit complete for finished item of work. (excluding cost of
20 As per Data plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)
(Red garden soil in this context it is defined as sandy loamy garden soil
congenial for plant growth which shall be of light textured, crystalline,
porous and friable, fertile, slightly acidic or neutral)

Trees 142 142.00

Total 142.00 Nos 678.40 Each 96,332.80
Maintenance of Palms/Tree planting: Trimming (once in month) and
application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt)
(once in quarterly) by manually excluding cost of fertilizers, it including
21 As per Data all operational, incidental ,labour charges, for complete of work for one
month maintenance.

Palms/Tree
maintenance for 100
1 x 142 142.00 Nos Nos/
1month
month
Page 99 of 333
Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

142.00 Nos 609.00 864.78

Maintenance of Palms/Tree planting: formation of basins 0.30m . away

from the edges of plant (once in a month) it including all operational,
incidental ,labour charges for complete of work for one month
22 As per Data maintenance.
100
Nos/
month
Palms/Tree 1 x 142
maintenance for 142.00 Nos
1month
142.00 Nos 1092.00 1,550.64
Maintenance of Palms/Tree planting: watering (once in three days @ 5
Lts/per plant shall be provide to maintain sub soil moisture
continuously) by manually, but excluding cost of water including all
23 As per Data operational, incidental ,labour charges for complete of work. for one
month maintenance. 100
Nos/
month
Palms/Tree 1 x 142
maintenance for 142.00 Nos
1month

142.00 Nos 945.00 1,341.90

Loading and unloading of plants bag size (21"X21") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P
24 As per data etc.,and overheads & contractors profit complete for finished item of
work (excluding cost of plant bag)

per
Topiary/trees/Palms 21" x 21" 142.00 Nos 3582.45 100 5,087.08
nos
Loading and unloading of plants bag size (13"X13") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P
25 As per data etc.,and overheads & contractors profit complete for finished item of
work (excluding cost of plant bag)

per
shrubs/ ground covers 13" x 13" 930.00 Nos 323.41 100 3,007.71
/floating Plants nos
Supplementary items
Providing hearting / casing embankment with homogeneous soil from
approved borrow areas in layers of 25 cm before compaction including
cost of all materials, machinery, labour, all operations such as
excavation, sorting out, transporting, spreading in layer of specified
thickness, breaking clods, sectioning, watering, compacting each layer to
(IRR-CAW-2- density control of not less than 95 percent or as stipulated by Sheep foot
26 roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with
7)
initial lead upto 1 km and all lifts and complete for finished item of work.

As per quantity levels

1 x 1 2283.628 2283.63

2283.63 Cum 227.20 Cum 518,831.54

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 220 kg of
cement and 20mm graded machine crushed hard granite metal (coarse
aggregate) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water
27 (BLD-CSTN- etc., and including all charges for Concrete Mixer, machine mixing, laying
3-10 & 11) concrete in position, vibrating, curing, overheads & contractors profit
etc., for finished item of work (APSS No. 402)

For fencing poles 1 x 115 0.45 0.45 0.45 10.48

10.48 Cum 6,466.92 Cum 67,773.33

Page 100 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Supply and fabrication of MS framed structure like Window Grills,

Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain
link mesh works ,Roof Trusses by using MS Flats as per SP:6(1) IS Hand
book , including cost of welding rods, power charges, labour charges for
28 As per Data cutting, placing, welding and erecting in position and fixing, cost &
convenience of all materials to site and complete for finished item of
work

MS flat of 25x5mmthick
@ 1.00 Kg/Rmt for fixing 1 x 104 1.80 187.20 Rmt
of chain-link mesh

@ 1.0 kg per meter 1 187.20 187.20 Kgs 127.14 Kgs 23,800.61

Supply and fabrication works like Window Grills, Compound Wall Grills,
Iron Doors, Windows, Gates, Roof Trusses by using MS solid plate
section as per IS 1730 including cost of welding rods, power charges,
29 As per Data labour charges for cutting, placing, welding & erecting in position and
fixing cost & convenience of all materials including wastage to site and
complete for finished item of work.

MS plate of 50x50x5mm
thick @ 39.20 Kg/Sqmt
as per design 1 x 115 0.050 0.050 0.29

@39.20 kg per Sqm 39.20 0.29 11.37

Limited to 10.97 Kgs 138.78 Kgs 1,522.42

Supplying and fixing G.I. Chain link fabric fencing of required width in
mesh size 50x50 mm opening of 4 mm dia GI wire including
strengthening with 2 mm dia wire or nuts, bolts and washers/welding in
the MS angle frame/ RCC fencing posts as required complete as per the
30 DSR 16-70.1 direction of Engineer-in-charge and including cost of all materials to site,
at page 920 incidental operational and all labour charges overheads & contractors
profit etc., complete for finished item of work

for chain link fencing 1 x 1 260.00 1.80 468.00

468.00 Sqm 939.75 Sqm 439,803.00

Providing and constructing 30 cm thick rubble stone pitching set in CM

1: 5 proportion with pin headers at 2 per sqm complete with initial lead
upto 50 m and all lifts including cost and conveyance to site including all
operational, incidental, labour charges, hand packing, laying to required
slope hand packing, finishing as directed by the Engineer- in-charge
31 IRR-CAW-8- etc., and overheads & contractors profit complete for finished item of
7 work

( rubble stones : 0.275 cum/sqm, Stone Chips : 0.045cum/sqm, Pin

Headers 30cm : 2/sqm)

for pitching 1 x 1 20.5 4.93 100.96

for pitching 1 x 1 15.75 5.00 78.75
for pitching 1 x 1 12 5.00 60.00
for pitching 1 x 1 14.3 5.45 77.94
for pitching 1 x 1 12.85 5.90 75.82
for pitching 1 x 1 12.2 5.90 71.98
for pitching 1 x 1 11.5 5.83 66.99
for pitching 1 x 1 14 6.05 84.70
for pitching 1 x 1 20.5 5.70 116.85
for pitching 1 x 1 15 4.90 73.50
for pitching 1 x 1 15 4.60 69.00
for pitching 1 x 1 15 4.65 69.75
for pitching 1 x 1 16 5.00 80.00
for pitching 1 x 1 14.68 5.30 77.80

Page 101 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

` for pitching 1 x 1 15 5.10 76.50

for pitching 1 x 1 17 4.95 84.15
for pitching 1 x 1 11.2 4.85 54.32
for pitching 1 x 1 10.47 4.85 50.78
1369.79
Limited to 1366.63 Sqm 957.21 Sqm 1,308,154.14
32 Supply and laying of 3/8" turfted synthetic grass type (artificial) of 35mm
pile height of fibre colour 4 field green + 4 olive green, root zone 4 jute+
4 field green with covering of 14 stitches per 10 cm with double backing
UV stable, 215 gram/sq.mt, coating with black SBR latex, duly fibres
As per meet the most stingent environmental standards, including cost of
Quatation material, transportation to the site, labor charges, etc., in complete item of
work.

for gym 1 x 1 10.00 19.00 190.00 Sqm 1,615.00 Sqm 306,850.00

For irrigation

33 as per data Manufacture, Supply, & Delivery of HDPE Pipes OD 40 mm 8 kg/scm

PE100 conforming to IS 4984 - 2016 including transportation to
anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil &
above 90 mm dia. straight length.) make as approved by the Engineer-In-
Charge including cost and conveyance of all materials to site, overheads
& contractors profit complete for finished item of work.

pipe line for greenery

1 x 1 225.00 225.00
work

225.00 Rmt 64.76 Rmt 14,571.12

34 as per data Laying, jointing of PVC/HDPE pipes as per BIS No.7634

part_x0002_III/75 for PVC and BIS No.7634 part-II/75 for HDPE pipes
including trench excavation and refilling. including cost and conveyance
of all materials to site, overheads & contractors profit complete for
finished item of work.
For Basement wall 1 x 1 225.00 225.00

225.00 Rmt 48.85 Rmt 10,992.25

35 as per data Supply and transportation of Supply and transportation of 63x25mm
Service Saddles with PP Clamp saddles, PP clamp Saddles shall be
manufactured by injection moulding using virgin polypropylene.
Mechanical tapping saddles for water works purposes and designed for
use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles
should be contoured to fit around the pipe. PP saddles shall be Blue/Black
moulded-in with Nickel plated Brass / SS 304 metal female threaded
outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking
water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be
mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted
to connect necessary fittings. Thread dimension shall conform to
IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass
insert in place and avoid leakage while pressure applications. Fasteners
shall be threaded type, with SS. Fasteners of size 125mm and above.
make as approved by the Engineer-In-Charge including cost and
conveyance of all materials to site, overheads & contractors profit
complete for finished item of work.

1 x 1 8.00 8.00

8.00 Nos 144.29 Each 1,154.33

36 as per data Supplying and fixing Gunmetal Gate ( GM ) 25 mm Nominal bore valve
as per Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian
make heavy type, including cost and conveyance of all materials , labour
charges , overheads & contractors profit complete for finished item of
work.

1 x 1 8.00 8.00

Page 102 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

8.00 nos 1,009.36 nos 8,074.85

37 as per data Supplying and Laying, jointing of UPVC 25 mm dia pipes 10 Kgs/cm2
for potable water supplies conforming to IS : 4985/2000 (3rd revision)
with bell ends (Socket) as per specification in light Grey/Natural Ivory
Grey/ Any other Color (except White) laying, jointing of pipes as per
BIS No.7634 part-III/75 for PVC, including cost of trench excavation
laying, fixing and commissioning the pipes including couplers/ bends/
tees with solvent jointing as per standardpractice and refilling etc.
including cost and conveyance of all materials to site, labour charges,
overheads & contractors profit complete for finished item of work

pipe line for greenery

1 x 8 1.00 8.00 Rmt 101.80 Rmt 814.39
work
Gym equipment
Supply and Fixing of Tai Chi Spinners: The product to match the colours, design, size, contours and aesthetics exactly as per the image
attached. All products must tested and certified to meet EN 16630 safety standards with 65 test mark. The EN16630 certificates must be
issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must
be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been
installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any live parks will be randomly
selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and
durability at site, the evaluation report to have photographs of the installed products taken at site showing the G5 mark and the condition
of the equipment, based upon which the tender shall be evaluated. The EN 16630 & GS Mark certificates must be submitted during the
technical bid and the same must reflect clearty on the notified certifying bodies websites as online verification is mandatory during
technical bid. All products must cleary display the GS mark as has been issued in the EN 16630 safety certificates. Upright structural posts
As per of beight 1.15 m is to be schedule HOT DIP Galvanized steel with a 114mm (0,0, and 2.2mm (wall) thickness of the tubing, Circular
38
Quatation Handrail of Dia 477 mm made with the pipe Dia of 32 mm fabricated from 33 0.D. galvanized steel pipes. The poles are welded on to a
base plate made from steel with 114mm inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and
moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters
must be in accordance with EN16630 safety norms. Scupe of delivery: 1 completely pre- assembled equipment modules. Maintenance:
Maintain according to EN 16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.25 mx 1,09 m x 1,49 m

Tai chi Spinners 1.00 Nos 94,893.00 Each 94,893.00

Supply and Fixing of Bicycle: The product to match the calours, design, site, contours and aesthetics exactly as per the image attached, "All
products must tested and certified to meet EN 16630 safety standards with GS test mark. The EN16630 certificates must be issued by a
reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the
name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in
at least 200 public parks across india the list of which to be mubmitted during the technical hid. Any five parks will be randomly selected
by the lendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at
rite, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the
equipment, based upon which the tender shall be evaluated, The EN16630 & G5 Mark certificates must be submitted during the technical
bid and the same must reflect clearty on the notified certifying bodles websites as online verification is mandatory during technical bid. All
products must clearly display the GS mark kas has been issued in the EN16630 safety certificates, Upright structural posts of of height 1.31
As per m is to be schedule HOT DIP Galvanized steel with a 60 mm Of), and 2.2mm (wall) thickness of the tubing. Two numbers of Pedal of size
39
Quatation 113mm x 40mm & Rotating Disc of Dia 380 mm fabricated from 40 GD, galvanized steel pipes. The poles are welded on to a base plate
made from steel with 114mm inner diameter, Welded, Bearings Maintenance-free ball bearings, Equipment which have sway and moving
parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in
accordance with EN16630 safety norms, Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance: Maintain
according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.11m x 0.51 mx 1.31 m

fixing of bicycle 1.00 Nos 118,686.00 Each 118,686.00

Page 103 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Supply and Flung of Sit Up Station: The product to match the colours, design, size, contours and sesthetics exactly as per the image
attached. "All products must tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be
issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, er SGS only. The GS mark-EN 16630 certificates must
be in the name of the supplier supplier by themselves or through their authorised dealers or contractors. The suppliers products must
have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will
be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety,
quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the CS mark and
the condition of the equipment, based upan which the tender shall be evaluated. The EN 16630 & GS Mark certificates must be submitted
during the technical bid and the same must reflect dearty on the notified certifying bodies websites as online verification is mandatory
during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural
As per posts of height 63 m is to be schedule HOT DIF Galvanized steel with a 114mm O.D. and 2.2un (wall) thickness of the tubing. Two shaped
40
Quatation Bars of 1.07 m and Dia 46 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter, Bearings:
Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted
and excessive movement, which can cause injuries. The limiters must be in accordance with EN 16630 safety norms, Scope of delivery: 1
completely pre-assembled equipment modules, Maintenance: Maintain according to EN16630 and the maintenance guide. EQUIPMENT
DIMENSIONS: 1.48 mx 1.21 mx 0.63 m

Flong of sit up station 1.00 Nos 134,176.00 Each 134,176.00

Supply and Foong of Waist Twaiter:" The product to match the colours, design, size, contours and aesthetics exactly as per the image
attached." All products must tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be
issued by a reputed notified International Certifying Body such as IFEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must
be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been
installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly
selected by the tendering authority or a third party appointed by it in check and ascertain the product GS Marks, safety, quality and
durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition
of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the
technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is stion is mandatory during
technical bid.. All products must dearly display the GS mark as has been issued in the EN 16630 safety certificates, Upright structural posts
As per of height 1,35 m is to be schedule HOT DIF Galvanized steel with a 114mm (0.0, and 2.2mm (wall) thickness of the tubing. Circular
41
Quatation Handrail Dia 42 mm fabricated from 42 0.D, galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm
inner diameter. An Internal limiter prevents the equipment from moving uncontrollably bearings: Maintenance-free hall bearings.
Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which
can cause injuries. The limiters must he in safety norms, Scope of delivery: 1 completely pre- assembled equipment modules,
Maintenance: Maintain according to EN16630 and the maintenance guide, Equipment Dimensions: 1.44 m x 1.24 mx 1.35 m

Foong of waist twaiter 1.00 Nos 114,978.00 Each 114,978.00

Supply and Fixing of Health Walker: The product in match the colours, design, stre, contours and aesthetics exactly as per the image
attached. "All products must tested and curtifled to meet EN 16630 safety standards with GS test mark, The EN 16630 certificates must be
issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must
be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been
installed in at least 200 public parks across india the list of which to be submitted during the technical bid. Any five parks will be randomly
selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and
durability at site, the evaluation report to have photographs of the installed products taken at site showing the 25 mark and the condition
of the equipment, hased upon which the the t tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during
the technical bid and the same must reflect clearly on the notifled certifying bodies websites as online verification is mandatory during
technical bid. All products must clearly display the GS mark as has been issued in the EN 16630 safety certificates ates. Upright structural
posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm OD, and 2.2mm (wall) thickness of the tubing. Twe
As per numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D, galvanized
42
Quatation steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An internal limiter prevents the
equipment from moving uncontrollably, Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must
have built in safety limiters that prevent unwanted and excessive movement. hich can cause injuries. The limiters must be in accordance
with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules, Maintenance Maintain according to
EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.18m x 0,553 mx 1.25 m

Page 104 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

fixing of health walker 1.00 Nos 110,802.00 Each 110,802.00

Supply and Fixng of Minis The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All
products must tested and certified to meet IN16630 safety standards with G5 test mark. The EN16630 certificates must be issued by a
reputed notified International Certifying Body such as IFEMA TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the
name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in
at least 200 public partes across India the list of which to be submitted during the technical bid. Any Dve parks will be randomly selected
by the lendering authority or third party a appointed by by it to and ascertain the product GS Marks, safety, quality and durability at site,
the evaluation report to have photographs of (the installed products taken at site showing the GS mark and the condition of the
equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical
bid and the same must reflect dearly on the notified certifying bodies websties as online verification is mandatory during technical bid. All
products must clearly display the QS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.40 m
is to be schedule HOT DIP Galvanized steel with a 114mm (0,1), and 2.2mm (wall) thickness of the tubing. The Standing Bars 991 mm and
43 Dia 60 mm fabricated from 40 ODD. galvanized steel pipes Upper part of Support Handrails of size 1.04 m high and Dis 38 mm fabricated
from 40mm 0.D. and 32 mm 0.0 galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm laner
diameter. An Internal limiter prevents the equipment from moving uncontrollably Bearings: Maintenance-free ball bearings. Equipment
which have sway and moving parts, must have buik in safety limiters that prevent unwanted and excessive movement, which can cause
injuries. The limiters must be in accordance with EN 16630 safety norms, Scope of delivery: 1 completely pre- assembled equipment
modules, Maintenance Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.07mx0.78 ms 140 m

fixing of minus 1.00 Nos 117,906.00 Each 117,906.00

Supply and Fixing of Squat Pushing: All products must tested and certified to meet M16630 safety standards with GS test mark. The EN
16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-
EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers
products must have been installed in at least 200 public parke across India the list of which to be submitted during the technical bld. Any
five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS
Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the
GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & G5 Mark certificates must
be submitted during the technical hid and the same must reflect clearly on the notified certifying bodies websites as online verification is
mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates,
Vertical bars height of 1.70 m is to be schedule NOT DIP Galvanized steel with a 114mm 0.D, and 2.2mm (wall) thickness of the tubing, L.
44 As per shaped bars of 460 mm x 600 mm carrying two seats sl 0,34 m x 0.34 m fabricated from 40 OD, galvanized steel pipes. The poles are
Quatation welded on to a base plate made from steel with 114mm inner diameter, Bearings: Maintenance-free ball bearings, Equipment which have
sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The
limiters must be in accordance with EN14430 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules.
Maintenance: Maintain according to EN 16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.93m x 0.56 m x 1,70 m

Squat Pushing 1.00 Nos 126,540.00 Each 126,540.00

Page 105 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Supply and Flong of Rider: All products must tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630
certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN
16630 certificates must be in the name of the supplier by themselves or through their authorised dealers er contractors. The suppliers
products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any
live parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS
Marks, safety, quality and durability at site, the evaluation report in have photographs of the installed products taken at site showing the
GS mark and the condition of the equipment, hated upon which the tender shall be evaluated, The EN 16630 & 25 Mark certificates must
be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is
mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates.
Upright structural posts of height 0.5 m is in be schedule HOT DIP Galvanized steel with a 114mm 0.D. and 2.2mm (wall) thickness of the
As per tubing. A single teat of size 330 mm x 250 mm Exed to the top of the vertical post and two Fedals & Bars of size 145 mm x 50 mm and Dia
45
Quatation 30 mm fabricated from 40 011. gulvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner
diameter, Bearings: Maintenance-free ball bearings Equipment which have sway and moving parts, must have built in safety limitere that
prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN 16630 safety norms,
Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance
guide. EQUIPMENT DIMENSIONS: 0.91 mx 0.05 mx 1.27m

Flong of Rider 1.00 Nos 105,139.00 Each 105,139.00

Supply and Fixing of Self Weighted Rower: The product to match the colours, design, size, contours and aesthetics exactly as per the
image attached. "All products must tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates
must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630
certificates must be in the same of the supplier by themselves or through their authorised dealers or contractors. The suppliers products
must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parts
will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety,
quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and
the condition of the equipment, based upon which the tender shall be evaluated. The EN 16630 & GS Mark certificates must be submitted
during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory
during technical hid. hid. All products must clearly display the GS mark as has been issued in the EN 16630 safety certificates. Horizontal
bars of length 1.26 m is to be schedule HOT DIP Galvanized steel with a 60mm O.D. and 2.2mm (wall) thickness of the tubing, Handle Bars
46 of 0.74 m and Dia 38 mm fabricated from 40 0.0. galvanized steel pipes. The poles are welded on to a base plate made from steel with
114mm inner diameter, Bearings: Maintenance-free bail bearings. Equipment which have sway and moving parts, must have built in
safety limiters that prevent unwanted and excessive movement, which can cause injuries, The limiters must be in accordance with
EN16630 safety norms, Scope of delivery: 1 completely pre-assembled equipment modules, Maintenance: Maintain according to EN
16630 and the maintenance guide.
EQUIPMENT DIMENSIONS: 1.26 m x 0,80 mx 1.59 m

self weighted rower 1.00 Nos 103,424.00 Each 103,424.00

Supply and Fixing of Big Shoulder Wheel: All products must tested and certified to meet EN16630 safety standards with G5 test mark. The
EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The G5
mark- EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The
suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical
bid. Any five parks will be randomly selected by the lendering authority or a third party appointed by it to check and ascertain the product
GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing
the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 à GS Mark certificates
must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online
verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN 16630 safety
certificates, Upright structural posts of height 1.47 m is to be schedule HOT DIP Galvanised steel with a 114mm (0.1), and 2.2mm (wall)
47 As per thickness of the tubing. Circular Handrail of Dia 0.64 m and Dia 42 mm fabricated from 42 0.D. galvanized steel pipes. The poles are
Quatation welded on to a base plate made from steel with 114mm Inner diameter. liearings: Maintenance-free ball bearings. Equipment which have
sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The
limiters must be in accordance with EN16630 safety nerms. Scope of delivery: 1 completely pre- assembled equipment modules,
Maintenance: Maintain according to EN16630 and the maintenance guide, EQUIPMENT DIMENSIONS: 0,69 m x 0,61 mx 1.94 m

Page 106 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Big shoulder wheel 1.00 Nos 91,970.00 Each 91,970.00

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers

and specified plants as per directions of officer in charge at site
including cost of plants
plants of bag size
7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet,
18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom
dia of the stem is 0.75'' and above,
21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7
48 feet, bottom dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown,
vigorously growing tip, healthy foliage without any infestation and the
plants shall be supplied after proper hardening off.
the rates inclusive of cost of plants and labour charges for handling &
complete for finished item of work.

Plants names Bag size

Shrub / Hedge planting

in 0.45 m trench
Pseuderanthemum
Carruthersii 13" x 13" 930.0 Nos 54.00 each 50,220.00

Department Palms/Tree
supply
Peltophorum Pterocarpum
21" x 21" 70.00 Nos 360.00 each 25,200.00

21" x 21" 2.00 Nos 472.50 each 945.00

Callistemon Viminalis
21" x 21" 70.00 Nos 315.00 each 22,050.00
Cassia Javanica
Transportation of bag
plants form
Simhadripuram to in
GVMC .
( Actual payment will Approxima
paid for the actual work te weight
49 done subjected to Bag size of plants of
No. of Unit weight in
approval of the weight bag size in plants Kgs
by the competent Kgs
authority )

21" x 21" 50.00 142.0 Nos 7100.00 Kgs

13" x 13" 10.00 930.0 Nos 9300.00 Kgs

1,072 Nos 16,400.0 Kgs

metric metric
50 Provision for transportation of bag plants Total weight 16.400 ton 1200 ton 19,680.00

Gate with Brick Masonary columns

Towards cost and supply of iron gate of size 3.0x1.8 m with

40mmx40mmx2.9mm thick hellow section alround the outside and 16mm
verticle square rods inside of the gate and Ms flat 40mm size with 5mm
thick across the gate and iron arrows above the gate including
conveyance charges and fabrication charges, fixing of the gate with brick
As per masonary colums of size 0.30x0.30x3 m with CM(1:6) with foundation
51
Quatation p.c.c (1:4:8) 100 thick and plastering CM(1:4) 20mm thick and fixing of
gate with 4 hinges including painting of gate and columns Etc., complete
for finished item of work

Page 107 of 333

Sl.No Item Code Description of Item Nos. L B D QTY Unit Rate Per Unit Unit Amount
(in Rs.) (in Rs.)

Gate with Brick

1 x 1 1.00 Nos
Masonary columns
No
1.00 Nos 52000.00 52,000.00

Name Board

Supplying and fixing of Name board 3.60X0.60 m height with MS

framework made up of 2 mm thick Ms sheet coverd gum sheet flexi of
name board and fixing of Vertical post 50 x 50 M.S Square of 1.20 m
height as approved by Engineer-in charge and framework with 25 x
As per 25mm G.I Square section welding/ fitted with suitable bolts and nuts
52
Quatation including cost and conveyance of all materials to site, incidental,
operational and all labour charges etc., complete for finished item of
work.

Name Board 1 x 1 1.00 Nos

No
1.00 Nos 15000.00 15,000.00

Value of work done 5,582,084.00

Add [email protected]% 243,937.00

Net Value of work done 5,826,021.00

Add seigniorage charges 198,581.00

Sub total 6,024,602.00

Add [email protected]% 6,025.00

Sub total 6,030,627.00

Add GST@18% 1,085,513.00

Add APG&BC Supervision charges@5% 291,301.00

Sub total 7,407,441.00

Unforseen items 11,092,559.00

Grand Total 18,500,000.00

Page 108 of 333

 A.P. Greening & Beautification Corporation, Vijayawada

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT
2.0 )
Bill of Quantities
Estimate Contract Value: Rs.41,77,025.12

S. Amount
Qty Unit Description of item Item code Rate words Unit
No. in Rs.

Supply and fixing of C.C. Kerb not less than M30 strength of size 600 X
400 X 110 mm thick with bottom thickness of 110 mm up to height of 350
mm and top width of 50 mm thick chamfering with 45° at starts at 350
mm height to 400 mm height as selected by the Engineer-in-charge from
approved source/ factory which is laid on existing CC Bed in position to
the required line, level and curvature jointed with cement mortar 1:3 (1
cement : 3 coarse sand), including making joints with or without grooves Rupees five hundred
(thickness of joints except at sharp curve shall not to more than 5 mm), (CPWD-II-
1 101.77 Rmt 540.78 forty and seventy eight Rmt 55,035.18
including making drainage opening wherever required and including 16.69)
paisa only
cost and conveyance of all materials & labour charges including
transportation from approved source, loading & unloading charges
including contractor profit & overhead charges complete for finished
item of work..

Clearing thick jungle growth ( less than 50 percent open space ) including
bushes upto 30 cm / parthenium and other weeds including burning or
disposing off the same as directed etc., complete.and it including all
Rupees four and seventy
2 2169.20 Sqm operational, incidental, labour charges, required tools, overheads & IRR-PMW-1-2 4.72 Sqm 10,238.62
two paisa only
contractors profit complete for finished item of work
 Clearing and grubbing the land including uprooting wild vegetation,
grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal
of stumps of such trees cut earlier and disposal of unserviceable materials
and stacking of serviceable material to be used or auctioned, upto a lead
of 1000 m including removal and disposal of top organic soil not RBR-STCL-2 Rupees two and fifty
3 1670.00 Sqm 2.57 Sqm 4,291.90
exceeding 150 mm in thickness as per Technical Specification Clause 201 seven paisa only
MORD / MORTH. By Mechanical Means

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground

covers and specified plants as per directions of officer in charge at site
including cost of plants
plants of bag size
7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet,
18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom
dia of the stem is 0.75'' and above,
4
21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7
feet, bottom dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown,
vigorously growing tip, healthy foliage without any infestation and the
plants shall be supplied after proper hardening off.
the rates inclusive of cost of plants and labour charges for handling &
complete for finished item of work.

5 Plants names Bag size

6 930.00 Nos Pseuderanthemum Carruthersii 13" x 13" 54.00 Nos 50,220.00
7 70.00 Nos Peltophorum Pterocarpum 21" x 21" 360.00 Nos 25,200.00
8 2.00 Nos Callistemon Viminalis 21" x 21" 472.50 Nos 945.00
9 70.00 Nos Cassia Javanica 21" x 21" 315.00 Nos 22,050.00

10 19.74 Cum Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete (BLD-CSTN-3- 6425.10 Cum 126,831.47
MIXER, 20mm size hard granite machine crushed graded metal (coarse 13-C)
11 2283.63 Cum Providing
aggregate hearting
- as per /IScasing
383 - embankment
1970 and IS with
2386 homogeneous 8) from (IRR-CAW-2-
Part 1 to Partsoil 227.20 Cum 518,831.54
approved quarry,
borrow using
areas ainminimum
layers of quantity
25 cm before
of 350compaction including
kgs. of cement per 1 7)
cost of all materials, machinery, labour, all operations such as excavation,
sorting out, transporting, spreading in layer of specified thickness,
12 10.48 Cum Vibrated Plain Cement Concrete (1:3:6) nominal mix using 220 kg of (BLD-CSTN- 6466.92 Cum 67,773.33
cement and 20mm graded machine crushed hard granite metal (coarse 3-10 & 11)
13 468.00 Sqm Supplying
aggregate) and fromfixing G.I. Chain
approved quarrylink fabric fencing
including cost and of required
conveyance width in DSR 16-70.1 at
of all 939.75 Sqm 439,803.00
mesh
materialssizelike50x50
cement, mm fineopening
aggregateof(sand), 4 mm dia aggregate,
coarse GI wire water includingetc., page 920
14 1366.63 Sqm Providing and constructing 30 cm thick rubble stone
strengthening with 2 mm dia wire or nuts, bolts and washers/welding in IRR-CAW-8-7pitching set in CM 957.21 Sqm 1,308,154.14
1:
the5 MS
proportion
angle frame/ with pin RCC headers
fencing at posts
2 peras sqm complete
required with initial
complete as perlead the
Supply
upto 50 and
m laying
and all of
lifts3/8" turfted
including synthetic
cost and grass
conveyance type (artificial)
to site of
including 35mm all As per
15 190.00 Sqm 1615.00 Sqm 306,850.00
pile height ofincidental,
operational, fibre colour 4 fieldcharges,
labour green +hand 4 olive green, root
packing, laying zone 4 jute+ 4
to required Quatation
16 225.00 Rmt Manufacture,
field green with Supply,
covering& Delivery of HDPE
of 14 stitches per Pipes
10 cmOD with 40 double
mm 8 backingkg/scm as per data 64.76 Rmt 14,571.12
PE100 conforming
UV stable, to IS 4984 - coating
215 gram/sq.mt, 2016 including
with black transportation
SBR latex,toduly anywherefibres
17 225.00 Rmt Laying,
in A.P, jointing
excluding of
all taxesPVC/HDPE
(Supply up to pipes
90 mm as
dia. per
in BIS
coil & No.7634
above 90 as per data 48.85 Rmt 10,992.25
part_x0002_III/75
mm dia. straight length.) for PVC make and BIS No.7634 part-II/75
as approved for HDPE pipes
by the Engineer-In-Charge
18 8.00 Nos Supply
including andtrench
transportation
excavation of Supply
and and transportation
refilling. including of cost
63x25mm and as per data 144.29 Nos 1,154.33
Service
conveyance Saddlesof all with PP Clamp
materials saddles,
to site, PP clamp
overheads Saddles shall
& contractors be
profit
19 8.00 nos Supplying
manufactured and fixing
by Gunmetal
injection Gate
moulding ( GM )
using25 mm Nominal
virgin bore
polypropylene. valve as per data 1009.36 nos 8,074.85
as per Ball valve
Mechanical tapping with SS Ballfor
saddles and SS Spindle
water as per IS -and
works purposes Class - I, Indian
designed for
20 8.00 Rmt Supplying
make heavyand type,Laying, jointing
including costofand UPVC 25 mm of
conveyance diaallpipes 10 Kgs/cm2
materials , labour as per data 101.80 Rmt 814.39
for potable
charges water supplies
, overheads conforming
& contractors profit to complete
IS : 4985/2000
for finished(3rd revision)
item of
Supply
with and
bell Fixing
ends of
(Socket) Tai Chi
as per Spinners:
specificationThe product
in light to match
Grey/Natural the colours,
Ivory As per
21 1.00 Nos 94893.00 Each 94,893.00
design, size, contours and aesthetics exactly
Grey/ Any other Color (except White) laying, jointing of pipes as per as per the image attached. Quatation
Supply and Fixing
All products must testedof Bicycle: The product
and certified to meetto match
EN 16630 the safety
calours, design,
standards As per
22 1.00 Nos 118686.00 Each 118,686.00
site,
with contours
65 test mark. andThe aesthetics
EN16630 exactly as per
certificates mustthebeimage
issuedattached,
by a reputed "All Quatation
Supply
productsand mustFlung testedof Sit
andUp Station:toThe
certified meetproduct to match
EN 16630 safetythestandards
colours, As per
23 1.00 Nos 134176.00 Each 134,176.00
design, size, contours and sesthetics exactly as
with GS test mark. The EN16630 certificates must be issued by a reputed per the image attached. Quatation
Supply and Foong
"All products of Waist
must tested andTwaiter:"
certified The product
to meet to match
EN 16630 safety the colours,
standards As per
24 1.00 Nos 114978.00 Each 114,978.00
design,
with GSsize, contours
test mark. Theand EN aesthetics exactly must
16630 certificates as perbethe image
issued a reputed Quatation
by attached."
Supply and Fixing
All products must testedof Health Walker: The
and certified product
to meet in match
EN 16630 safety thestandards
colours, As per
25 1.00 Nos 110802.00 Each 110,802.00
design, stre, contours and aesthetics exactly as
with GS test mark. The EN 16630 certificates must be issued by a reputed per the image attached. Quatation
Supply and Fixng
"All products must of tested
Minis The and product
curtifledto to match
meettheEN colours,
16630 design,
safety As per
26 1.00 Nos 117906.00 Each 117,906.00
size, contours
standards with andGS test aesthetics
mark, The exactly
EN 16630 as per the image
certificates must attached.
be issued"All by Quatation
Supply
productsand mustFixing
tested of andSquat
certifiedPushing:
to meetAll products
IN16630 safety must tested with
standards and As per
27 1.00 Nos 126540.00 Each 126,540.00
certified to meet M16630 safety standards
G5 test mark. The EN16630 certificates must be issued by a reputed with GS test mark. The EN Quatation
Supply and Flong of
16630 certificates Rider:
must be All products
issued by amust testednotified
reputed and certified to meet
International As per
28 1.00 Nos 105139.00 Each 105,139.00
EN 16630 safety
Certifying Body such standards
as IPEMA,with GS TUV, testCPSC,
mark.orThe SGSEN only.16630 GS mark- Quatation
Thecertificates
Supply
must beand issuedFixingby aofreputed
Self Weighted Rower: The product
notified International Certifying to Body
matchsuch the As per
29 1.00 Nos 103424.00 Each 103,424.00
colours, design, size, contours and aesthetics
as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates exactly as per the image Quatation
Supply
attached. and"AllFixing
products of Big Shoulder
must tested and Wheel: All products
certified to meet must EN 16630tested and
safety As per
30 1.00 0.00 91970.00 Each 91,970.00
certified
standardstowith meet GS EN16630
test mark. safety
The ENstandards with G5must
16630 certificates testbemark.
issuedThe by Quatation
Transportation
EN16630 certificates of bagmust plants beform
issued Simhadripuram
by a reputedtonotified in GVMC .
International
( Actual
Certifying payment
Body such will
as paid
IPEMA, for
TUV,the actual
CPSC, orwork
SGS done
only. Thesubjected
G5 mark- to As per metric
31 16.40 metric ton 1200.00 19,680.00
approval of the weight by the competent authority ) Quatation ton
 Towards cost and supply of iron gate of size 3.0x1.8 m with
40mmx40mmx2.9mm thick hellow section alround the outside and 16mm
verticle square rods inside of the gate and Ms flat 40mm size with 5mm
thick across the gate and iron arrows above the gate including
conveyance charges and fabrication charges, fixing of the gate with brick
32 1.00 Nos masonary colums of size 0.30x0.30x3 m with CM(1:6) with foundation As per Quatati 52000.00 Nos 52,000.00
p.c.c (1:4:8) 100 thick and plastering CM(1:4) 20mm thick and fixing of
gate with 4 hinges including painting of gate and columns Etc., complete
for finished item of work

Supplying and fixing of Name board 3.60X0.60 m height with MS

framework made up of 2 mm thick Ms sheet coverd gum sheet flexi of
name board and fixing of Vertical post 50 x 50 M.S Square of 1.20 m
height as approved by Engineer-in charge and framework with 25 x
25mm G.I Square section welding/ fitted with suitable bolts and nuts As per
33 1.00 Nos 15000.00 Nos 15,000.00
including cost and conveyance of all materials to site, incidental, Quatation
operational and all labour charges etc., complete for finished item of
work.

Total
4,177,025.12
Say ECV
4,177,025.00
Rupees one crore twenty one lakh thirty six thousand three hundred twenty six only

* The above rates are exciusive of GST & Seigniorage charges

 A.P. Greening & Beautification Corporation, Vijayawada

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT 2.0 )

Deviation Statement
S.
Description of item As per TS estimate As per Revised estimate Excess Less
No.
Hardscape (Civil works) Remarks
Amount Amount Amount Amount
Unit Qty Rate Qty Rate Qty Qty
in Rs. in Rs. in Rs. in Rs.

Earth work excavation for foundations (Manual Means) of buildings,

septic tank, sump, compound wall in ordinary soils and depositing There is no way to
on bank with an initial lead of 10m and depth up to 3m including all execute the
operational, incidental, labour charges such as shoring, sheeting, compound wall
1 planking, strutting etc., and overheads & contractors profit complete Cum 587.77 303.97 178,664.45 94.89 303.97 28,843.71 - - 492.88 149,820.73 proposed fencing
for finished item of work excluding dewatering charges etc., as per SS against compound
20 B(APSS 308) wall since quantity
comes out less

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse

aggregate) for foundations and under flooring bed using 162.0 kgs of
cement, coarse aggregate 40mm size hard , machine crushed granite There is no way to
from approved quarry including cost and conveyance of all materials execute the
like cement, sand, coarse aggregate, water etc., to site, and including compound wall
2 all charges for machine mixing, laying concrete in foundations and Cum 83.23 5374.83 447,347.10 39.99 5374.83 214,939.45 - - 43.24 232,407.65 proposed fencing
under flooring bed, ramming in 15 cm layers finishing top surface to against compound
the required level curing etc., and overheads & contractors profit wall since quantity
complete for finished item of work. (APSS No. 402) comes out less

Supply and fixing of C.C. Kerb not less than M30 strength of size 600
X 400 X 110 mm thick with bottom thickness of 110 mm up to height
of 350 mm and top width of 50 mm thick chamfering with 45° at
starts at 350 mm height to 400 mm height as selected by the Engineer-
in-charge from approved source/ factory which is laid on existing CC
Bed in position to the required line, level and curvature jointed with
cement mortar 1:3 (1 cement : 3 coarse sand), including making joints
3 with or without grooves (thickness of joints except at sharp curve Rmt 410.00 540.78 221,719.80 511.77 540.78 276,754.98 101.77 55,035.18 - - As per Actuals
shall not to more than 5 mm), including making drainage opening
wherever required and including cost and conveyance of all
materials & labour charges including transportation from approved
source, loading & unloading charges including contractor profit &
overhead charges complete for finished item of work..

Filling with dust in pathways with initial lead in layers not exceeding
15cm thick, watering and ramming including cost and conveyance of Proposed
water to work site and all operational, incidental, labour charges, hire murrampathway
4 charges of T&P etc., and overheads & contractors profit complete for Cum 86.00 978.80 84,176.80 978.80 - - - 86.00 84,176.80 against cc pavers
finished item of work(APSS NO.309&310) Since this item
deleted
 Supply of precast concrete blocks for paving of M-35 grade and
thickness not less than 60 mm for Light traffic areas conforming to IS
15658:2006 in all shapes and designs as per the manufacturer's
specification set over the 50 mm thick sand bed with hand roller
compaction with joint neatly in homogeneous or heterogeneous Proposed
pattern as the colour and pattern shall be as per the drawings murrampathway
5 furnished by the architect, including cost and conveyance of all sqm 860.00 867.10 745,706.00 867.10 - - - 860.00 745,706.00 against cc pavers
materials like cement, sand, water, tiles, etc., to site including all Since this item
operational, incidental, labour charges, laying tiles to required slope deleted
as directed by the Engineer- in-charge etc., and overheads &
contractors profit complete for finished item of work

Clearing thin jungle growth ( more than 50 percent open space )

including bushes upto 30 cm / parthenium and other weeds
including burning or disposing off the same as directed etc., complete
6 and it including all operational, incidental, labour charges, required Sqm 1500.00 3.05 4,575.00 1036.80 3.05 3,162.24 - - 463.20 1,412.76 As per Actuals
tools, overheads & contractors profit complete for finished item of
work
Clearing thick jungle growth ( less than 50 percent open space )
including bushes upto 30 cm / parthenium and other weeds
including burning or disposing off the same as directed etc.,
7 complete.and it including all operational, incidental, labour charges, Sqm 250.00 4.72 1,180.00 2419.20 4.72 11,418.62 2,169.20 10,238.62 - - As per Actuals
required tools, overheads & contractors profit complete for finished
item of work
Clearing and grubbing the land including uprooting wild vegetation,
grass, bushes, shrubs, saplings and trees of girth upto 300 mm,
removal of stumps of such trees cut earlier and disposal of
unserviceable materials and stacking of serviceable material to be
8 used or auctioned, upto a lead of 1000 m including removal and Sqm 250.00 2.57 642.50 1920.00 2.57 4,934.40 1,670.00 4,291.90 - - As per Actuals
disposal of top organic soil not exceeding 150 mm in thickness as per
Technical Specification Clause 201 MORD / MORTH. By
Mechanical Means

Excavation in all kinds of soil including boulders upto 0.3 m diameter

for canal, seating of embankment, filter drains / catch water drains
etc., including dressing bed and sides to required level and profile,
cost of all materials, machinery, labour, placing the excavated soil
9 neatly in dump area or for the formation of service road / Cum 6300.00 140.26 883,638.00 838.14 140.26 117,557.52 - - 5,461.86 766,080.48 As per Actuals
embankment as directed etc., complete with initial lead upto 1 km
and all lifts. including all operational, incidental, labour charges etc.,
and overheads & contractors profit complete for finished item of
work.

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened

sand) using hard granite stones carted from approved quarry
including cost and conveyance of all materials like cement, screened
sand, water,Rough stone Through stone, Coursed stones etc., from
approved quarry, to site, including labour charges for cutting stones
10 Cum 303.25 5284.02 1,602,379.07 5284.02 - - - 303.25 1,602,379.07 As per Actuals
to required size and shape, mixing, of cement, mortar, construction,
curing, charges for scaffolding etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 601 & 615)

Filling with carted gravel in pathways, trenches, sides of foundations

and basement with initial lead in layers not exceeding 15cm thick,
watering and ramming including cost and conveyance of water to
11 work site and all operational, incidental, labour charges, hire charges Cum 630.00 547.79 345,107.70 273.23 547.79 149,672.66 - - 356.77 195,435.04 As per Actuals
of T&P etc., and overheads & contractors profit complete for finished
item of work(APSS NO.309&310)
 Providing and constructing 30 cm thick dry rubble stone pitching
with pin headers at 2 per sqm, complete with initial lead upto 50 m
and all lifts including cost and conveyance to site including all
operational, incidental, labour charges, hand packing, laying to Proposed stone
pitching with
12 required slope hand packing, finishing as directed by the Engineer- Sqm 3150.00 485.99 1,530,868.50 485.99 - - - 3,150.00 1,530,868.50
in-charge etc., and overheads & contractors profit complete for grouting since this
finished item of work item deleted
( rubble stones : 0.275
cum/sqm, Stone Chips : 0.045cum/sqm, Pin Headers 30cm : 2/sqm)

Masonry work in CM(1:6) prop (Cement : Screened sand) in

superstructure with fly ash cement / lime solid blocks of size 290mm There is no way to
x 225mm x 140mm from approved source having minimum crushing execute the
strength of 50 Kg/Sqcm. including cost and conveyance of all compound wall
13 materials like cement, sand, bricks, water etc., to site,and such as cum 84.60 7803.79 660,200.63 4.67 7803.79 36,443.70 - - 79.93 623,756.93 proposed fencing
labour charges, like mixing cement mortar, scaffolding charges, against compound
constructing masonry, lift charges, curing, overheads and contractor wall since quantity
profit etc., complete for finished item of work. (APSS No. 501 & 504). comes out less

Plastering 12mm thick single coat in CM(1:5) using screened sand

including cost and conveyance of all materials like cement, sand, There is no way to
water etc., to site and all operational, incidental charges on materials execute the
and including cost of all labour charges for mixing mortar, finishing, compound wall
14 curing as directed by Engineer-in-charge etc., and overheads & sqm 235.00 439.78 103,348.30 40.60 439.78 17,855.07 - - 194.40 85,493.23 proposed fencing
contractors profit complete for finished item of work.(SS 901,903 & against compound
904) wall since quantity
comes out less

Providing 0.450 m wide Coping with 16 to 18mm thick High

Polished granite up to 8'-00 (2.43 M) other than black and regular
colours with borders and design as per the pattern approved by the
Engineer-in-Charge , set over base coat of cement mortar (1:5) , 12mm
thick using screened sand over the stone ,Brick masonry or CC bed There is no way to
already laid , including neat grey cement slurry of honey like execute the
consistency spread @ 3.3 Kg per sqm and jointed neatly with white compound wall
15 cement paste mixed with pigment of matching shade to full depth Sqm 105.75 4221.58 446,432.09 4221.58 - - - 105.75 446,432.09 proposed fencing
including cost and conveyance of all materials like cement , sand , against compound
water , granite slabs etc., to work site and all operational, incidental wall since quantity
labour & lift charges, and cost of base coat and overheads & comes out less
contractors profit complete for finished item of work for Coping
(S.S.701 & special)

Supply & application of one coat water based cement primer of

exterior grade II and two coats of acrylic exterior emulsion paint There is no way to
having VOC (Volatile Organic Compound) content less than 50 execute the
grams/litre for exterior walls including cost and conveyance of all compound wall
16 materials to site,and all operational, incidental, labour charges etc., Sqm 235.00 305.26 71,736.10 173.83 305.26 53,063.35 - - 61.17 18,672.75 proposed fencing
and overheads & contractors profit complete for finished item of against compound
work in all floors. wall since quantity
comes out less
 Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
corresponding to IS 456 with minimum cement content of 350 kgs per
1 cum of concrete using CONCRETE MIXER with 20mm size HBG
graded machine crushed hard granite metal (coarse aggregate - as per
IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry and
including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water, etc., to site and , centring
using Steel scaffolding pipes , jack props , Waller’s , Foot plates , 0.00 - - - - -
brackets , steel centring plates etc., including all operational,
incidental and labour charges such as machine mixing, laying
concrete, vibrator, curing etc., and overheads & contractors profit
complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)

17 For Footings Cum 16.28 10619.61 172,887.25 10619.61 - - - 16.28 172,887.25

18 For Pedestals Cum 12.06 11298.80 136,263.53 11298.80 - - - 12.06 136,263.53

19 For Plinth Beam above the basement wall Cum 28.80 13436.35 386,966.88 13436.35 - - - 28.80 386,966.88

20 For Columns Cum 12.06 13330.45 160,765.23 13330.45 - - - 12.06 160,765.23

Providing High Yield Strength Deformed (HYSD) / Thermo
Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-
1979) of different diameters for RCC works , including labour charges
for straightening, cutting, bending to required sizes and shapes,
placing in position with cover blocks of approved materials and size There is no way to
and tying and lap-splicing with binding wire of 18 SWG, forming execute the
grills for reinforcement work as per approved designs and drawings, compound wall
21 including cost and conveyance of steel bars, including all wastages Kgs 6069.80 95.91 582,154.52 937.50 95.91 89,915.63 - - 5,132.30 492,238.89 proposed fencing
such as overlaps, couplings, chairs, spacer bars including cost and against compound
conveyance of binding wire, cover blocks and all incidental, wall since quantity
operational, labour charges such as cutting, bending, placing in comes out less
position, tying including overheads & contractors profit complete for
finished item of work.( APSS No.126)

Masonry work in CM(1:6) prop (Cement : Screened sand) in

superstructure with fly ash cement / lime solid blocks of size 290mm There is no way to
x 225mm x 140mm from approved source having minimum crushing execute the
strength of 50 Kg/Sqcm. including cost and conveyance of all compound wall
22 materials like cement, sand, bricks, water etc., to site,and such as Cum 55.20 7803.79 430,769.21 7803.79 - - - 55.20 430,769.21 proposed fencing
labour charges, like mixing cement mortar, scaffolding charges, against compound
constructing masonry, lift charges, curing, overheads and contractor wall since quantity
profit etc., complete for finished item of work. (APSS No. 501 & 504). comes out less

Supply and fabrication of MS framed structure like Window Grills,

Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for There is no way to
chain link mesh works, Roof Trusses by using square / rectangular execute the
MS hollow section as per IS 4923 & Angles as per SP:6(1) IS Hand compound wall
23 book, including cost of welding rods, power charges, labour charges Kgs 11261.98 127.14 1,431,848.14 1622.71 127.14 206,311.35 - - 9,639.27 1,225,536.79 proposed fencing
for cutting, placing, welding and erecting in position and fixing, cost against compound
& convenience of all materials including wastage to site and complete wall since quantity
for finished item of work comes out less

Supply and fabrication works like Window Grills, Compound Wall

Grills, Iron Doors, Windows, Gates, Roof Trusses by using MS solid There is no way to
plate section as per IS 1730 including cost of welding rods, power execute the
charges, labour charges for cutting, placing, welding & erecting in compound wall
24 position and fixing cost & convenience of all materials including Kgs 413.56 138.78 57,393.86 10.97 138.78 1,522.42 - - 402.59 55,871.44 proposed fencing
wastage to site and complete for finished item of work. against compound
wall since quantity
comes out less
 Painting to new iron work with one coat of Red oxide primer and
two coats with synthetic enamel paint Grade-I VOC (Volatile Organic There is no way to
Compound) content less than 50 grams/litre over primer coat of red execute the
oxid, including cost and conveyance of all materials like Red oxide compound wall
25 primer, Synthetic Enamel Paint to site, incidental, operational and all Sqm 530.21 221.26 117,314.26 76.76 221.26 16,983.92 - - 453.45 100,330.35 proposed fencing
labour charges etc., and overheads & contractors profit complete for against compound
finished item of work in all floors. (SS No. 1201, 1212 & 1207). wall since quantity
comes out less

Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete

MIXER, 20mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) There is no way to
from approved quarry, using a minimum quantity of 350 kgs. of execute the
cement per 1 cum of concrete , including cost and conveyance of all compound wall
26 materials like cement, fine aggregate (Sand), coarse aggregate, water Cum 6.93 7953.39 55,116.99 7953.39 - - - 6.93 55,116.99 proposed fencing
etc., to site including steel centring, shuttering, machine mixing, lift against compound
charges, laying concrete, vibrating, curing, overheads & contractors wall since quantity
profit etc., complete for finished item of work (APSS No. 402 & 403) comes out less

Providing 0.30 m wide Coping with Polished black Kadapa slabs

minimum of 25 mm to 30 mm thick in single piece as specified set
over a base coat of CM (1:5) , 12mm thick using screened sand over
already laid CC bed / RCC roof slab including neat cement slurry of There is no way to
honey like consistency spread @ 3.3 Kgs per Sqm and jointed with execute the
neat cement to full depth including cost and conveyance of all compound wall
27 materials like cement, sand, water, flooring stones etc. complete Sqm 134.17 954.71 128,093.44 954.71 - - - 134.17 128,093.44 proposed fencing
including all labour charges like dressing of flooring stones to the against compound
required size, flat nosing the edges, mixing of cement mortar, laying, wall since quantity
lift charges , cost of base coat, water charges etc., and overheads & comes out less
contractors profit complete for finished item of work (APSS No.703 &
701)

Plastering 12mm thick in two coats using screened sand with base
coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4)
with dubara sponge finishing including cost and conveyance of all There is no way to
materials like cement, sand, water etc., to site, ,, and all operational, execute the
incidental charges on materials and including cost of all labour compound wall
28 charges for mixing mortar, finishing, scaffolding, lift charges, curing, Sqm 662.14 583.34 386,252.75 583.34 - - - 662.14 386,252.75 proposed fencing
including cutting grooves as directed by Engineer - in - charge etc., against compound
and overheads & contractors profit complete for finished item of wall since quantity
work. (SS 901,903 & 904) comes out less

Providing and applying PMCC / Deco orient base or Equivalent

exterior Texture ( borders and design as per the pattern approved by
the Engineer-in-Charge ) of average 2 to 3 mm thickness over
plastered surface to prepare the surface even and smooth after
There is no way to
thoroughly brushing the surface to remove all dirt and remains of
execute the
loose powdered materials, applying emery paper, Sand the surface,
compound wall
clean & wipe off loose dust, applying putty/ texture paint filler by
29 Sqm 662.14 475.22 314,662.17 475.22 - - - 662.14 314,662.17 proposed fencing
putty knife / muslin pad, air dry for 2 - 3 hrs for the surface
against compound
preparation including cost and conveyance of all materials to work
wall since quantity
site and all operational, incidental, labour charges, scaffolding
comes out less
charges, overheads and contractors profit etc., complete for finished
item of work in all floors for external walls
 Supply & application of one coat water based cement primer of
exterior grade II and two coats of acrylic exterior emulsion paint There is no way to
having VOC (Volatile Organic Compound) content less than 50 execute the
grams/litre for exterior walls including cost and conveyance of all compound wall
30 materials to site,and all operational, incidental, labour charges etc., Sqm 662.14 305.26 202,124.86 305.26 - - - 662.14 202,124.86 proposed fencing
and overheads & contractors profit complete for finished item of against compound
work in all floors. wall since quantity
comes out less

Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth,

refilling with red garden soil including cost of red garden soil and
farmyard manure at 4:1 ratio, internal transportation of plants,
planting etc., including the application of fertilizers and pesticides
etc.,(@ 20 gms/pit/sqmt) and it including all operational, incidental,
labour charges, required tools, overheads & contractors profit
complete for finished item of work, but excluding the cost of the
31 fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt Sqm 186.00 719.64 133,853.04 186.00 719.64 133,853.04 - - - -
of work. (* 5 No./Sqm of plants & bag size shall be arrived based on
the spacing 0.45 c/c as per the design.)(Red garden soil in this context
it is defined as sandy loamy garden soil congenial for plant growth
which shall be of light textured, crystalline, porous and friable, fertile,
slightly acidic or neutral).

Maintenance of hedge/shrub planting: Trimming of hedges/shrubs

(once in a month) it including all operational, incidental, labour
32 charges for complete of work, for one month maintenance. Sqm 186.00 472.50 878.85 186.00 472.50 878.85 - - - -

Maintenance of hedge/shrub planting: Edge cutting 0.30mtr. away

from the edges/shrub (once in a month) and application of fertilizers,
insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by
33 manually excluding cost of fertilizers it including all operational, Sqm 186.00 464.10 863.23 186.00 464.10 863.23 - - - -
incidental, labour charges, for complete of work. for one month
maintenance.
Maintenance of hedge/shrub planting: watering once in 2 days @ 5
Lts/per sqmt shall be provide to maintain sub soil moisture
34 continuously by manually excluding cost of wateri ncluding all Sqm 186.00 787.50 1,464.75 186.00 787.50 1,464.75 - - - -
operational, incidental ,labour charges for complete of work.. for one
month maintenance.
Digging of 0.75x0.75x0.75 mtrs. pit, filling with soil mixture of red
garden soil, farmyard manure at 4:1 ratio including internal transport,
application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal
transportation of plants, planting the plants etc., and it including all
operational, incidental, labour charges, required tools, overheads &
contractors profit complete for finished item of work. (excluding cost
35 of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt) Nos 142.00 678.40 96,332.80 142.00 678.40 96,332.80 - - - -
(Red garden soil in this context it is defined as sandy loamy garden
soil congenial for plant growth which shall be of light textured,
crystalline, porous and friable, fertile, slightly acidic or neutral)

Maintenance of Palms/Tree planting: Trimming (once in month) and

application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt)
36 (once in quarterly) by manually excluding cost of fertilizers, it Nos 142.00 609.00 864.78 142.00 609.00 864.78 - - - -
including all operational, incidental ,labour charges, for complete of
work for one month maintenance.
Maintenance of Palms/Tree planting: formation of basins 0.30m .
away from the edges of plant (once in a month) it including all
37 operational, incidental ,labour charges for complete of work for one Nos 142.00 1092.00 1,550.64 142.00 1092.00 1,550.64 - - - -
month maintenance.
 Maintenance of Palms/Tree planting: watering (once in three days @
5 Lts/per plant shall be provide to maintain sub soil moisture
38 continuously) by manually, but excluding cost of water including all Nos 142.00 945.00 1,341.90 142.00 945.00 1,341.90 - - - -
operational, incidental ,labour charges for complete of work. for one
month maintenance.
Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground
covers and specified plants as per directions of officer in charge at
site including cost of plants plants of bag size 7" x 8" of plant height
not less than 1.0 feet,8" x 10" of plant height not less than 3.0 feet,13" x
13" of Tree/Palm height not less than 5 feet,13" x 13" of plant
(Hedges & Shrub) height not less than 2 feet,15" x 16" of plant
(Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant
(Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the
stem is 0.75'' and above, 21" x 21" and above plant
(Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the 0.00 - - - -
stem is 1'' and above.Heights mentioned above are excluding bag
height.All the plants supplied shall be with sturdy stem, well formed
crown, vigorously growing tip, healthy foliage without any
infestation and the plants shall be supplied after proper hardening
off. the rates inclusive of cost of plants and labour charges for
handling & complete for finished item of work.

Plants names -
Pseuderanthemum Carruthersii
39 Nos 930.00 54.00 50,220.00 930.00 50,220.00 - -

40 Nymphaeaceae Nos - - - - -

41 Peltophorum Pterocarpum Nos 70.00 360.00 25,200.00 70.00 25,200.00 - -

Callistemon Viminalis
42 Nos 2.00 472.50 945.00 2.00 945.00 - -

Cassia Javanica
43 Nos 70.00 315.00 22,050.00 70.00 22,050.00 - -

Loading and unloading of plants bag size (21"X21") at site of work

and stacking for lead less upto 50 m and including labour charges,
44 T&P etc.,and overheads & contractors profit complete for finished Nos 142.00 3582.45 5,087.08 142.00 3582.45 5,087.08 - - - -
item of work (excluding cost of plant bag)
Loading and unloading of plants bag size (13"X13") at site of work
and stacking for lead less upto 50 m and including labour charges,
45 T&P etc.,and overheads & contractors profit complete for finished Nos 930.00 323.41 3,007.71 930.00 323.41 3,007.71 - - - -
item of work (excluding cost of plant bag)
Loading and Unloading of plants bag size (8"X10") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P
46 etc.,and overheads & contractors profit complete for finished item of Nos 792.00 94.22 746.22 94.22 - - 792.00 746.22
work (excluding cost of plant bag)
SUPPLEMENTARY ITEMS - - - -

Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete

MIXER, 20mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of
As per instructions
cement per 1 cum of concrete , including cost and conveyance of all
of MD Proposed
47 materials like cement, fine aggregate (Sand), coarse aggregate, water Cum 19.74 6,425.10 126,831.47 19.74 126,831.47 - -
Gyn equipment in
etc., to site including steel centring, shuttering, machine mixing, lift
this water body
charges, laying concrete, vibrating, curing, overheads & contractors
profit etc., complete for finished item of work (APSS No. 402 & 403)
 Providing hearting / casing embankment with homogeneous soil
from approved borrow areas in layers of 25 cm before compaction
including cost of all materials, machinery, labour, all operations such
as excavation, sorting out, transporting, spreading in layer of
specified thickness, breaking clods, sectioning, watering, compacting
48 each layer to density control of not less than 95 percent or as Cum 2283.63 227.20 518,831.54 2,283.63 518,831.54 - -
stipulated by Sheep foot roller / Vibratory roller/ 8 to 10 tonne power
roller etc., complete with initial lead upto 1 km and all lifts and
complete for finished item of work.

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 220 kg of

cement and 20mm graded machine crushed hard granite metal There is no way to
(coarse aggregate) from approved quarry including cost and execute the
conveyance of all materials like cement, fine aggregate (sand), coarse compound wall
49 aggregate, water etc., and including all charges for Concrete Mixer, Cum 10.48 6,466.92 67,773.33 10.48 67,773.33 - -
proposed fencing
machine mixing, laying concrete in position, vibrating, curing, against compound
overheads & contractors profit etc., for finished item of work (APSS wall
No. 402)

Supplying and fixing G.I. Chain link fabric fencing of required width
in mesh size 50x50 mm opening of 4 mm dia GI wire including There is no way to
strengthening with 2 mm dia wire or nuts, bolts and execute the
washers/welding in the MS angle frame/ RCC fencing posts as compound wall
50 required complete as per the direction of Engineer-in-charge and Sqm 468.00 939.75 439,803.00 468.00 439,803.00 - -
proposed fencing
including cost of all materials to site, incidental operational and all against compound
labour charges overheads & contractors profit etc., complete for wall
finished item of work

Providing and constructing 30 cm thick rubble stone pitching set in

CM 1: 5 proportion with pin headers at 2 per sqm complete with
initial lead upto 50 m and all lifts including cost and conveyance to
site including all operational, incidental, labour charges, hand
packing, laying to required slope hand packing, finishing as directed Proposed stone
51 by the Engineer- in-charge etc., and overheads & contractors profit sqm 1366.63 957.21 1,308,154.14 1,366.63 1,308,154.14 - - pitching with
complete for finished item of work grouting

( rubble stones : 0.275 cum/sqm, Stone Chips : 0.045cum/sqm, Pin

Headers 30cm : 2/sqm)

Supply and laying of 3/8" turfted synthetic grass type (artificial) of

35mm pile height of fibre colour 4 field green + 4 olive green, root
zone 4 jute+ 4 field green with covering of 14 stitches per 10 cm with
double backing UV stable, 215 gram/sq.mt, coating with black SBR Proposed stone
52 latex, duly fibres meet the most stingent environmental standards, Sqm 190.00 1,615.00 306,850.00 190.00 306,850.00 - - pitching with
including cost of material, transportation to the site, labor charges, grouting
etc., in complete item of work.

Manufacture, Supply, & Delivery of HDPE Pipes OD 40 mm 8

kg/scm PE100 conforming to IS 4984 - 2016 including transportation
to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in
53 coil & above 90 mm dia. straight length.) make as approved by the Rmt 225.00 64.76 14,571.12 225.00 14,571.12 - -
Engineer-In-Charge including cost and conveyance of all materials to
site, overheads & contractors profit complete for finished item of
work.

Laying, jointing of PVC/HDPE pipes as per BIS No.7634

part_x0002_III/75 for PVC and BIS No.7634 part-II/75 for HDPE
54 pipes including trench excavation and refilling. including cost and Rmt 225.00 48.85 10,992.25 225.00 10,992.25 - -
conveyance of all materials to site, overheads & contractors profit
complete for finished item of work.
 Supply and transportation of Supply and transportation of 63x25mm
Service Saddles with PP Clamp saddles, PP clamp Saddles shall be
manufactured by injection moulding using virgin polypropylene.
Mechanical tapping saddles for water works purposes and designed
for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These
saddles should be contoured to fit around the pipe. PP saddles shall
be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal
female threaded outlets. Seal shall be thermoplastic elastomer rubber
suitable for drinking water and nut-bolt-washer with SS. The PP
Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated
55 Brass female threaded outlet inserted to connect necessary fittings. Each 8.00 144.29 1,154.33 8.00 1,154.33 - -
Thread dimension shall conform to IS-554/ISO-7. Adequate thickness
of PP shall be provided to hold brass insert in place and avoid
leakage while pressure applications. Fasteners shall be threaded type,
with SS. Fasteners of size 125mm and above. make as approved by
the Engineer-In-Charge including cost and conveyance of all
materials to site, overheads & contractors profit complete for finished
item of work.

Supplying and fixing Gunmetal Gate ( GM ) 25 mm Nominal bore

valve as per Ball valve with SS Ball and SS Spindle as per IS - Class - I,
56 Indian make heavy type, including cost and conveyance of all Each 8.00 1,009.36 8,074.85 8.00 8,074.85 - -
materials , labour charges , overheads & contractors profit complete
for finished item of work.
Supplying and Laying, jointing of UPVC 25 mm dia pipes 10
Kgs/cm2 for potable water supplies conforming to IS : 4985/2000
(3rd revision) with bell ends (Socket) as per specification in light
Grey/Natural Ivory Grey/ Any other Color (except White) laying,
jointing of pipes as per BIS No.7634 part-III/75 for PVC, including
cost of trench excavation laying, fixing and commissioning the pipes
57 Rmt 8.00 101.80 814.39 8.00 814.39 - -
including couplers/ bends/ tees with solvent jointing as per
standardpractice and refilling etc. including cost and conveyance of
all materials to site, labour charges, overheads & contractors profit
complete for finished item of work

Supply and Fixing of Tai Chi Spinners: The product to match the
colours, design, size, contours and aesthetics exactly as per the image
attached. All products must tested and certified to meet EN 16630
safety standards with 65 test mark. The EN16630 certificates must be
issued by a reputed notified International Certifying Body such as
IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates
must be in the name of the supplier by themselves or through their As per instructions
authorised dealers or contractors. The suppliers products must have of MD Proposed
58 Nos 1.00 94,893.00 94,893.00 1.00 94,893.00 - -
been installed in at least 200 public parks across India the list of Gyn equipment in
which to be submitted during the technical bid. Any live parks will be this water body
randomly selected by the tendering authority or a third party
appointed by it to check and ascertain the product GS Marks, safety,
quality and durability at site, the evaluation report to have
photographs of the installed products taken at site showing the G5
mark and the condition of the equipment, based upon which the
tender shall be evaluated. The EN 16630 & GS Mark certificates must
be submitted during the technical bid and the same must reflect
 Supply and Fixing of Bicycle: The product to match the calours,
design, site, contours and aesthetics exactly as per the image attached,
"All products must tested and certified to meet EN 16630 safety
standards with GS test mark. The EN16630 certificates must be issued
by a reputed notified International Certifying Body such as IPEMA,
TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be
in the name of the supplier by themselves or through their authorised
dealers or contractors. The suppliers products must have been
installed in at least 200 public parks across india the list of which to
be mubmitted during the technical hid. Any five parks will be
randomly selected by the lendering authority or a third party
appointed by it to check and ascertain the product GS Marks, safety, As per instructions
quality and durability at rite, the evaluation report to have of MD Proposed
59 Nos 1.00 118,686.00 118,686.00 1.00 118,686.00 - -
photographs of the installed products taken at site showing the GS Gyn equipment in
mark and the condition of the equipment, based upon which the this water body
tender shall be evaluated, The EN16630 & G5 Mark certificates must
be submitted during the technical bid and the same must reflect
clearty on the notified certifying bodles websites as online verification
is mandatory during technical bid. All products must clearly display
the GS mark kas has been issued in the EN16630 safety certificates,
Upright structural posts of of height 1.31 m is to be schedule HOT
DIP Galvanized steel with a 60 mm Of), and 2.2mm (wall) thickness
of the tubing. Two numbers of Pedal of size 113mm x 40mm &
Rotating Disc of Dia 380 mm fabricated from 40 GD, galvanized steel
pipes. The poles are welded on to a base plate made from steel with
114mm inner diameter, Welded, Bearings Maintenance-free ball
Supply and Flung of Sit Up Station: The product to match the colours,
design, size, contours and sesthetics exactly as per the image
attached. "All products must tested and certified to meet EN 16630
safety standards with GS test mark. The EN 16630 certificates must be
issued by a reputed notified International Certifying Body such as
IPEMA, TUV, CPSC, er SGS only. The GS mark-EN 16630 certificates
must be in the name of the supplier supplier by themselves or
through their authorised dealers or contractors. The suppliers
products must have been installed in at least 200 public parks across
India the list of which to be submitted during the technical bid. Any
five parks will be randomly selected by the tendering authority or a
third party appointed by it to check and ascertain the product GS As per instructions
Marks, safety, quality and durability at site, the evaluation report to of MD Proposed
60 Nos 1.00 134,176.00 134,176.00 1.00 134,176.00 - -
have photographs of the installed products taken at site showing the Gyn equipment in
CS mark and the condition of the equipment, based upan which the this water body
tender shall be evaluated. The EN 16630 & GS Mark certificates must
be submitted during the technical bid and the same must reflect
dearty on the notified certifying bodies websites as online verification
is mandatory during technical bid. All products must clearly display
the GS mark as has been issued in the EN16630 safety certificates.
Upright structural posts of height 63 m is to be schedule HOT DIF
Galvanized steel with a 114mm O.D. and 2.2un (wall) thickness of the
tubing. Two shaped Bars of 1.07 m and Dia 46 mm. The poles are
welded on to a base plate made from steel with 114mm inner
diameter, Bearings: Maintenance-free ball bearings. Equipment which
have sway and moving parts, must have built in safety limiters that
 Supply and Foong of Waist Twaiter:" The product to match the
colours, design, size, contours and aesthetics exactly as per the image
attached." All products must tested and certified to meet EN 16630
safety standards with GS test mark. The EN 16630 certificates must be
issued by a reputed notified International Certifying Body such as
IFEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates
must be in the name of the supplier by themselves or through their
authorised dealers or contractors. The suppliers products must have
been installed in at least 200 public parks across India the list of
which to be submitted during the technical bid. Any five parks will
be randomly selected by the tendering authority or a third party
appointed by it in check and ascertain the product GS Marks, safety, As per instructions
quality and durability at site, the evaluation report to have of MD Proposed
61 Nos 1.00 114,978.00 114,978.00 1.00 114,978.00 - -
photographs of the installed products taken at site showing the GS Gyn equipment in
mark and the condition of the equipment, based upon which the this water body
tender shall be evaluated. The EN16630 & GS Mark certificates must
be submitted during the technical bid and the same must reflect
clearly on the notified certifying bodies websites as online verification
is stion is mandatory during technical bid.. All products must dearly
display the GS mark as has been issued in the EN 16630 safety
certificates, Upright structural posts of height 1,35 m is to be schedule
HOT DIF Galvanized steel with a 114mm (0.0, and 2.2mm (wall)
thickness of the tubing. Circular Handrail Dia 42 mm fabricated from
42 0.D, galvanized steel pipes. The poles are welded on to a base plate
made from steel with 114mm inner diameter. An Internal limiter
prevents the equipment from moving uncontrollably bearings:
Supply and Fixing of Health Walker: The product in match the
colours, design, stre, contours and aesthetics exactly as per the image
attached. "All products must tested and curtifled to meet EN 16630
safety standards with GS test mark, The EN 16630 certificates must be
issued by a reputed notified International Certifying Body such as
IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates
must be in the name of the supplier by themselves or through their
authorised dealers or contractors. The suppliers products must have
been installed in at least 200 public parks across india the list of which
to be submitted during the technical bid. Any five parks will be
randomly selected by the tendering authority or a third party
appointed by it to check and ascertain the product GS Marks, safety, As per instructions
quality and durability at site, the evaluation report to have of MD Proposed
62 Nos 1.00 110,802.00 110,802.00 1.00 110,802.00 - -
photographs of the installed products taken at site showing the 25 Gyn equipment in
mark and the condition of the equipment, hased upon which the the t this water body
tender shall be evaluated. The EN16630 & GS Mark certificates must
be submitted during the technical bid and the same must reflect
clearly on the notifled certifying bodies websites as online verification
is mandatory during technical bid. All products must clearly display
the GS mark as has been issued in the EN 16630 safety certificates
ates. Upright structural posts of height 1.25 m is to be schedule HOT
DIP Galvanized steel with a 114mm OD, and 2.2mm (wall) thickness
of the tubing. Twe numbers of Foot Rest of size 361 mm x 161 mm are
attached to the Standing Bars 957mm x 60 mm fabricated from 60
O.D, galvanized steel pipes. The poles are welded on to a base plate
made from steel with 114mm inner diameter. An internal limiter
 Supply and Fixng of Minis The product to match the colours, design,
size, contours and aesthetics exactly as per the image attached. "All
products must tested and certified to meet IN16630 safety standards
with G5 test mark. The EN16630 certificates must be issued by a
reputed notified International Certifying Body such as IFEMA TUV,
CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the
name of the supplier by themselves or through their authorised
dealers or contractors. The suppliers products must have been
installed in at least 200 public partes across India the list of which to
be submitted during the technical bid. Any Dve parks will be
randomly selected by the lendering authority or third party a
appointed by by it to and ascertain the product GS Marks, safety, As per instructions
quality and durability at site, the evaluation report to have of MD Proposed
63 Nos 1.00 117,906.00 117,906.00 1.00 117,906.00 - -
photographs of (the installed products taken at site showing the GS Gyn equipment in
mark and the condition of the equipment, based upon which the this water body
tender shall be evaluated. The EN16630 & GS Mark certificates must
be submitted during the technical bid and the same must reflect
dearly on the notified certifying bodies websties as online verification
is mandatory during technical bid. All products must clearly display
the QS mark as has been issued in the EN16630 safety certificates.
Upright structural posts of height 1.40 m is to be schedule HOT DIP
Galvanized steel with a 114mm (0,1), and 2.2mm (wall) thickness of
the tubing. The Standing Bars 991 mm and Dia 60 mm fabricated
from 40 ODD. galvanized steel pipes Upper part of Support
Handrails of size 1.04 m high and Dis 38 mm fabricated from 40mm
0.D. and 32 mm 0.0 galvanized steel pipes. The poles are welded on to
Supply and Fixing of Squat Pushing: All products must tested and
certified to meet M16630 safety standards with GS test mark. The EN
16630 certificates must be issued by a reputed notified International
Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS
mark-EN 16630 certificates must be in the name of the supplier by
themselves or through their authorised dealers or contractors. The
suppliers products must have been installed in at least 200 public
parke across India the list of which to be submitted during the
technical bld. Any five parks will be randomly selected by the
tendering authority or a third party appointed by it to check and
ascertain the product GS Marks, safety, quality and durability at site,
the evaluation report to have photographs of the installed products As per instructions
taken at site showing the GS mark and the condition of the of MD Proposed
64 Nos 1.00 126,540.00 126,540.00 1.00 126,540.00 - -
equipment, based upon which the tender shall be evaluated. The Gyn equipment in
EN16630 & G5 Mark certificates must be submitted during the this water body
technical hid and the same must reflect clearly on the notified
certifying bodies websites as online verification is mandatory during
technical bid. All products must clearly display the GS mark as has
been issued in the EN16630 safety certificates, Vertical bars height of
1.70 m is to be schedule NOT DIP Galvanized steel with a 114mm
0.D, and 2.2mm (wall) thickness of the tubing, L. shaped bars of 460
mm x 600 mm carrying two seats sl 0,34 m x 0.34 m fabricated from 40
OD, galvanized steel pipes. The poles are welded on to a base plate
made from steel with 114mm inner diameter, Bearings: Maintenance-
free ball bearings, Equipment which have sway and moving parts,
must have built in safety limiters that prevent unwanted and
 Supply and Flong of Rider: All products must tested and certified to meet
EN 16630 safety standards with GS test mark. The EN 16630 certificates
must be issued by a reputed notified International Certifying Body such as
IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must
be in the name of the supplier by themselves or through their authorised
dealers er contractors. The suppliers products must have been installed in
at least 200 public parks across India the list of which to be submitted
during the technical bid. Any live parks will be randomly selected by the
tendering authority or a third party appointed by it to check and ascertain
the product GS Marks, safety, quality and durability at site, the evaluation
report in have photographs of the installed products taken at site showing
the GS mark and the condition of the equipment, hated upon which the
tender shall be evaluated, The EN 16630 & 25 Mark certificates must be As per instructions
submitted during the technical bid and the same must reflect clearly on the of MD Proposed
65 notified certifying bodies websites as online verification is mandatory
Nos 1.00 105,139.00 105,139.00 1.00 105,139.00 - -
Gyn equipment in
during technical bid. All products must clearly display the GS mark as has this water body
been issued in the EN16630 safety certificates. Upright structural posts of
height 0.5 m is in be schedule HOT DIP Galvanized steel with a 114mm 0.D.
and 2.2mm (wall) thickness of the tubing. A single teat of size 330 mm x 250
mm Exed to the top of the vertical post and two Fedals & Bars of size 145
mm x 50 mm and Dia 30 mm fabricated from 40 011. gulvanized steel pipes.
The poles are welded on to a base plate made from steel with 114mm inner
diameter, Bearings: Maintenance-free ball bearings Equipment which have
sway and moving parts, must have built in safety limitere that prevent
unwanted and excessive movement, which can cause injuries. The limiters
must be in accordance with EN 16630 safety norms, Scope of delivery: 1
completely pre- assembled equipment modules. Maintenance: Maintain
according to EN16630 and the maintenance guide. EQUIPMENT
DIMENSIONS:
Supply and Fixing0.91 mx
of 0.05
Self mx 1.27m Rower: The product to match the
Weighted
colours, design, size, contours and aesthetics exactly as per the image
attached. "All products must tested and certified to meet EN 16630 safety
standards with GS test mark. The EN 16630 certificates must be issued by a
reputed notified International Certifying Body such as IPEMA, TUV, CPSC,
or SGS only. The GS mark-EN 16630 certificates must be in the same of the
supplier by themselves or through their authorised dealers or contractors.
The suppliers products must have been installed in at least 200 public parks
across India the list of which to be submitted during the technical bid. Any
five parts will be randomly selected by the tendering authority or a third
party appointed by it to check and ascertain the product GS Marks, safety,
quality and durability at site, the evaluation report to have photographs of
the installed products taken at site showing the GS mark and the condition As per instructions
of the equipment, based upon which the tender shall be evaluated. The EN of MD Proposed
66 16630 & GS Mark certificates must be submitted during the technical bid
Nos 1.00 103,424.00 103,424.00 1.00 103,424.00 - -
Gyn equipment in
and the same must reflect clearly on the notified certifying bodies websites this water body
as online verification is mandatory during technical hid. hid. All products
must clearly display the GS mark as has been issued in the EN 16630 safety
certificates. Horizontal bars of length 1.26 m is to be schedule HOT DIP
Galvanized steel with a 60mm O.D. and 2.2mm (wall) thickness of the
tubing, Handle Bars of 0.74 m and Dia 38 mm fabricated from 40 0.0.
galvanized steel pipes. The poles are welded on to a base plate made from
steel with 114mm inner diameter, Bearings: Maintenance-free bail bearings.
Equipment which have sway and moving parts, must have built in safety
limiters that prevent unwanted and excessive movement, which can cause
injuries, The limiters must be in accordance with EN16630 safety norms,
Scope of delivery: 1 completely pre-assembled equipment modules,
Maintenance: Maintain according to EN 16630 and the maintenance guide.
EQUIPMENT DIMENSIONS: 1.26 m x 0,80 mx 1.59 m
 Supply and Fixing of Big Shoulder Wheel: All products must tested and
certified to meet EN16630 safety standards with G5 test mark. The EN16630
certificates must be issued by a reputed notified International Certifying
Body such as IPEMA, TUV, CPSC, or SGS only. The G5 mark- EN 16630
certificates must be in the name of the supplier by themselves or through
their authorised dealers or contractors. The suppliers products must have
been installed in at least 200 public parks across India the list of which to be
submitted during the technical bid. Any five parks will be randomly
selected by the lendering authority or a third party appointed by it to check
and ascertain the product GS Marks, safety, quality and durability at site,
the evaluation report to have photographs of the installed products taken at
site showing the GS mark and the condition of the equipment, based upon
which the tender shall be evaluated. The EN16630 à GS Mark certificates As per instructions
must be submitted during the technical bid and the same must reflect of MD Proposed
67 clearly on the notified certifying bodies websites as online verification is
Nos 1.00 91,970.00 91,970.00 1.00 91,970.00 - -
Gyn equipment in
mandatory during technical bid. All products must clearly display the GS this water body
mark as has been issued in the EN 16630 safety certificates, Upright
structural posts of height 1.47 m is to be schedule HOT DIP Galvanised
steel with a 114mm (0.1), and 2.2mm (wall) thickness of the tubing. Circular
Handrail of Dia 0.64 m and Dia 42 mm fabricated from 42 0.D. galvanized
steel pipes. The poles are welded on to a base plate made from steel with
114mm Inner diameter. liearings: Maintenance-free ball bearings.
Equipment which have sway and moving parts, must have built in safety
limiters that prevent unwanted and excessive movement, which can cause
injuries. The limiters must be in accordance with EN16630 safety nerms.
Scope of delivery: 1 completely pre- assembled equipment modules,
Maintenance: Maintain according to EN16630 and the maintenance guide,
EQUIPMENT DIMENSIONS: 0,69 m x 0,61 mx 1.94 m
Transportation of bag plants form Simhadripuram to in GVMC .
( Actual payment will paid for the actual work done subjected to
68 metric ton 16.40 1,200.00 19,680.00 16.40 19,680.00 - -
approval of the weight by the competent authority )

Towards cost and supply of iron gate of size 3.0x1.8 m with

40mmx40mmx2.9mm thick hellow section alround the outside and
16mm verticle square rods inside of the gate and Ms flat 40mm size
with 5mm thick across the gate and iron arrows above the gate
including conveyance charges and fabrication charges, fixing of the
69 gate with brick masonary colums of size 0.30x0.30x3 m with CM(1:6) Nos 1.00 52,000.00 52,000.00 1.00 52,000.00 - -
with foundation p.c.c (1:4:8) 100 thick and plastering CM(1:4) 20mm
thick and fixing of gate with 4 hinges including painting of gate and
columns Etc., complete for finished item of work
 Supplying and fixing of Name board 3.60X0.60 m height with MS
framework made up of 2 mm thick Ms sheet coverd gum sheet flexi
of name board and fixing of Vertical post 50 x 50 M.S Square of 1.20
m height as approved by Engineer-in charge and framework with 25
70 x 25mm G.I Square section welding/ fitted with suitable bolts and Nos 1.00 15,000.00 15,000.00 1.00 15,000.00 - -
nuts including cost and conveyance of all materials to site, incidental,
operational and all labour charges etc., complete for finished item of
work.

ECV value 12,136,326.13 Value of workdone 5,582,083.00 Total 4,177,025.00 Total 10,731,268.00
530,357.00 Add TP @ 4.37% 243,937.00 TP 182,536.00 TP 468,956.00
12,666,683.00 Net Value of workdone 5,826,020.00 AE&SI 4,359,561.00 AE&SI 11,200,224.00

Add seigniorage charges 198,581.00

Sub total 6,024,601.00

Add [email protected]% 6,025.00
Sub total 6,030,626.00

Add GST@18% 1,085,513.00 6,554,243.00

Add APG&BC Supervision
charges@5% 291,301.00 6,554,243.13

Sub total 7,407,440.00

Unforseen items 11,092,560.00

Grand total 18,500,000.00

 CIVIL DATA : Page-128

A.P. Greening & Beautification Corporation

D A T A ( SOR 2022-23)

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District
Andhra Pradesh. ( AMRUT 2.0 )

CEMENT MORTAR PER CUM CM (1:2) CM (1:3) CM (1:4) CM (1:5) CM (1:6) CM (1:8)
Cost of Sand for mortar & Plastering
2284.80 2284.80 2284.80 2284.80 2284.80 2284.80
( 1.05 cum )
Cost of cement 3038.40 2025.60 1519.20 1215.36 1012.80 759.60
Mazdoor ( Unskilled ) for mixing mortar
105.00 105.00 105.00 105.00 105.00 105.00
( 0.20 Nos.)

MA @ 40% 42.00 42.00 42.00 42.00 42.00 42.00

Rate per Cum 5470.20 4457.4 3951.00 3647.16 3444.60 3191.40
Kgs of cement per 1 cum of mortar 720 480 360 288 240 180

20 mm HBG graded metal

Aggregates 20mm nominal size 0.60 1970.20 1182.12
Aggregates 13.20 / 12.50mm nominal size 0.15 1665.20 249.78
Aggregates 10mm nominal size 0.15 1475.20 221.28
Aggregates 6mm nominal size 0.10 1270.20 127.02
Rate per Cum 1780.20

12 mm HBG graded metal

Aggregates 13.20 / 12.50mm nominal size 0.60 1665.20 999.12
Aggregates 10mm nominal size 0.20 1475.20 295.04
Aggregates 6mm nominal size 0.20 1270.20 254.04
Rate per Cum 1548.20

D A T A ( SOR 2022-23)

Sl. No. CFMS code Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)

Providing hearting / casing embankment with homogeneous soil from approved borrow areas in layers of 25 cm
before compaction including cost of all materials, machinery, labour, all operations such as excavation, sorting
out, transporting, spreading in layer of specified thickness, breaking clods, sectioning, watering, compacting each
(IRR-CAW-
1 layer to density control of not less than 95 percent or as stipulated by Sheep foot roller / Vibratory roller/ 8 to 10
2-7)
tonne power roller etc., complete with initial lead upto 1 km and all lifts and complete for finished item of work.

(IRR-CAW-2-7)
Unit : 1.00 cum
Taking output = 677.28 cum
a)Machinery
HIR-00050,
LAB-00360, Angle dozer 90hp 6.06 hour 1650.20 1.00 hour 10000.21
HIR-00184
HIR-00050,
LAB-00360, Fuel/Energy charges 6.06 hour 1055.30 1.00 hour 6395.12
HIR-00184
HIR-00054,
LAB-00363, Shovel 0.50 cum 75 hp 8.00 hour 987.00 1.00 hour 7896.00
HIR-00188
HIR-00054,
LAB-00363, Fuel/Energy charges 8.00 hour 822.09 1.00 hour 6576.72
HIR-00188
 CIVIL DATA : Page-129

Sl. No. CFMS code Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
HIR-00064,
LAB-00371, Tipper 5 cum 48.00 hour 436.30 1.00 hour 20942.40
HIR-00198
HIR-00064,
LAB-00371, Fuel/Energy charges 48.00 hour 518.40 1.00 hour 24883.20
HIR-00198
HIR-00054,
LAB-00363, Pump 5 hp ( diesel 3.00 hour 9.70 1.00 hour 29.10
HIR-00188
HIR-00050,
LAB-00360, Fuel/Energy charges 3.00 hour 137.70 1.00 hour 413.10
HIR-00184
HIR-00056,
LAB-00364, Water tanker 8000 ltr 6.00 hour 408.30 1.00 hour 2449.80
HIR-00190
HIR-00056,
LAB-00364, Fuel/Energy charges 6.00 hour 518.40 1.00 hour 3110.40
HIR-00190
HIR-00026,
LAB-00339, Vibratory roller 8 tonne 6.16 hour 1328.10 1.00 hour 8181.10
HIR-00160
HIR-00026,
LAB-00339, Fuel/Energy charges 6.16 hour 1782.90 1.00 hour 10982.66
HIR-00160
b) Labour
HIR-00050,
LAB-00360, Crew for Dozer 6.06 hour 326.30 1.00 hour 1977.38
HIR-00184
HIR-00050,
LAB-00360, Crew for Shovel 8.00 hour 326.30 1.00 hour 2610.40
HIR-00184
HIR-00050,
LAB-00360, Crew for Tipper 48.00 hour 244.70 1.00 hour 11745.60
HIR-00184
HIR-00050,
LAB-00360, Crew for Pump 3.00 hour 153.50 1.00 hour 460.50
HIR-00184
HIR-00050,
LAB-00360, Crew for Water tanker 6.00 hour 241.80 1.00 hour 1450.80
HIR-00184
HIR-00026,
LAB-00339, Crew for roller 6.16 hour 368.20 1.00 hour 2268.11
HIR-00160
LAB-00010 Work inspector 2.00 day 685.00 1.00 day 1370.00
LAB-00120 Mazdoor 4.00 day 525.00 1.00 day 2100.00
MA @ 40% 0.40 day 23982.79 9593.12
135435.72

Overheads & Contractors Profit @13.615% 0.13615 135435.72 18439.57

Rate per 677.28 cum 153875.29
Rate per 1.00 cum 227.20

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 220 kg of cement and 20mm graded machine
crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all
2 materials like cement, fine aggregate (sand), coarse aggregate, water etc., and including all charges for Concrete
Mixer, machine mixing, laying concrete in position, vibrating, curing, overheads & contractors profit etc., for
finished item of work (APSS No. 402)

(BLD-CSTN-3-10 & 11)

 CIVIL DATA : Page-130

Sl. No. CFMS code Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Unit : 1cum
A.MATERIALS :
HBG 20mm size graded metal 0.90 Cum 1780.20 1 Cum 1602.18
As per lead Sand 0.45 Cum 2081.00 1 Cum 936.45

MAT-00005 Cement 220.00 Kgs 4220.00 1 MT 928.40

MAT-00332 Water ( including for curing ) 1.20 Kl 125.00 1 Kl 150.00

B.MACHINERY :
HIR-00016, Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 188.10 1 hour 188.10
LAB-00329, cum)capacity
HIR-00150 Crew Charges 1.00 hour 306.80 1 hour 306.80
Add MA on crew charges 0.40 306.80 122.72
HIR-00040, Needle vibrator 40mm ( petrol ) 1.00 hours 38.20 1 hour 38.20
LAB-00352,
HIR-00174 Crew charges 1.00 hours 220.90 1 hour 220.90
Add MA on crew charges 0.40 220.90 88.36
C.LABOUR :
LAB-00011 1st class mason 0.10 Nos. 630.00 1 Each 63.00

LAB-00120 Mazdoor (Unskilled) 1.39 Nos. 525.00 1 Each 729.75

MA @ 40% 0.40 792.75 317.10
Rate for 1 cum 5691.96
Overheads & Contractors Profit @13.615% 0.13615 5691.96 774.96
Rate per 1 cum 6466.92

1.70mts 1.80mts

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted
from approved quarry including cost and conveyance of all materials like cement, screened sand, water,Rough
3 stone Through stone, Coursed stones etc., from approved quarry, to site, including labour charges for cutting
stones to required size and shape, mixing, of cement, mortar, construction, curing, charges for scaffolding etc.,
and overheads & contractors profit complete for finished item of work. (APSS No. 601 & 615)

( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
MAT-00005 Cement 59.40 Kgs 4220.00 1000 Kgs 250.67
As per lead Coursed stone 0.44 Cum 1121.25 1 Cum 493.35
As per lead Rough stone (HBG) 0.50 Cum 703.20 1 Cum 351.60
As per lead Through stone 25x25x 0.45 to 60 cm 0.16 Cum 1837.58 1 Cum 294.01

As per lead Fine aggregate(sand) 0.33 Cum 2081.00 1 Cum 686.73

B) LABOUR

LAB-00011 1st class mason 1.20 Nos. 630.00 1 Each 756.00

LAB-00120 Mazdoor (unskilled) 2.00 Nos. 525.00 1 Each 1050.00

MA @ 40% 0.40 1806.00 722.40
4604.76
Add water charges 0.01 4604.76 46.05
Rate per 1 cum 4650.81

a Up to basement
Rate as worked out above 1.00 Cum 4650.81 1 Cum 4650.81
 CIVIL DATA : Page-131

Sl. No. CFMS code Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)

Overheads & Contractors Profit @13.615% 0.13615 4650.81 633.21

Rate per 1 cum 5284.02

MS Flats

Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors,
Windows, Gates, MS Frame for chain link mesh works ,Roof Trusses by using MS Flats as per SP:6(1) IS Hand
4
book , including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting
in position and fixing, cost & convenience of all materials to site and complete for finished item of work

Data for 1 Kg

Cost of MS steel including @2.5% wastage 1.025 Kg 60.00 1.00 Kg 61.50

LAB-00420 Fabrication charges 1.00 Kg 30.00 1.00 Kg 30.00
LAB-00421 Erections charges 1.00 Kg 6.00 1.00 Kg 6.00
MA @ 40% 0.40 36.00 14.40
Overheads & Contractors Profit @13.615% 0.13615 111.90 15.24
Rate for 1 Kg 127.14
MS solid plate

Supply and fabrication works like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, Roof
Trusses by using MS solid plate section as per IS 1730 including cost of welding rods, power charges, labour
5
charges for cutting, placing, welding & erecting in position and fixing cost & convenience of all materials
including wastage to site and complete for finished item of work.

Data for 1 Kg
Cost of MS solid plate including @ 2.5%
1.025 Kg 70.00 1.00 Kg 71.75
wastage
LAB-00420 Fabrication charges 1.00 Kg 30.00 1.00 Kg 30.00

LAB-00421 Erections charges 1.00 Kg 6.00 1.00 Kg 6.00

MA @ 40% 0.40 36.00 14.40

Overheads & Contractors Profit @13.615% 0.13615 122.15 16.63

Rate for 1 Kg 138.78

Supplying and fixing G.I. Chain link fabric fencing of required width in mesh size 50x50 mm opening of 4 mm
dia GI wire including strengthening with 2 mm dia wire or nuts, bolts and washers/welding in the MS angle
DSR 16-70.1
6 frame/ RCC fencing posts as required complete as per the direction of Engineer-in-charge and including cost of
at page 920
all materials to site, incidental operational and all labour charges overheads & contractors profit etc., complete
for finished item of work

Unit =10 Sqm

Taking output = 1 Sqm

A.Material

Chainlink mesh [50x50mm opening] of 4mm

MAT-00886 10.50 Sqm 506.00 1 Sqm 5313.00
dia

B.Labour for fixing & stretching fencing

 CIVIL DATA : Page-132

Sl. No. CFMS code Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)

LAB-00002 Blacksmith 2.14 day 590.00 1 day 1262.60

LAB-00120 Beldar (Mazdoor) 1.62 day 525.00 1 day 850.50

MA @ 40% 0.40 2113.10 845.24
8271.34

Overheads & Contractors Profit @13.615% 0.13615 8271.34 1126.14

Rate per 10.00 Sqm 9397.48

Rate per 1.00 Sqm 939.75

Providing and constructing 30 cm thick rubble stone pitching set in CM 1: 5 proportion with pin headers at 2
per sqm complete with initial lead upto 50 m and all lifts including cost and conveyance to site including all
operational, incidental, labour charges, hand packing, laying to required slope hand packing, finishing as directed
7
by the Engineer- in-charge etc., and overheads & contractors profit complete for finished item of work

( rubble stones : 0.275 cum/sqm, Stone Chips : 0.045cum/sqm, Pin Headers 30cm : 2/sqm)

IRR-CAW-8-7
Unit = 100 sqm
Taking output = 1 Sqm
A.MATERIALS
As per lead Cement 3000.00 Kgs 4220.00 1000 Kgs 12660.00

As per lead Un-coursed rubble stones (at quarry) 27.50 Cum 778.20 1 Cum 21400.50

As per lead Pin header (Through stone) 25x25x30 3.75 Cum 2205.20 1 Cum 8269.50

As per lead Stone chips @ 15 % quarry 4.50 Cum 840.20 1 Cum 3780.90

As per lead Fine aggregate(sand) 10.50 Cum 2176.00 1 Cum 22848.00

B) LABOUR
HIR-00026,
LAB-00339, Crew for Pump 2.00 Hours 153.50 1 Hours 307.00
HIR-00160
LAB-00010 Work Inspector 1.00 Day 685.00 1 Day 685.00

LAB-00091 Mason Class II 5.00 Day 565.00 1 Day 2825.00

LAB-00120 Mazdoor (unskilled) 12.00 Day 525.00 1 Day 6300.00

MA @ 40% 0.40 10117.00 4046.80

C) Machinery
HIR-00026,
LAB-00339, Dewatering pump 5 hp (Diesel) 2.00 Hours 146.80 1 Hour 293.60
HIR-00160
Add water charges 0.01 83416.30 834.16

84250.46

Overheads & Contractors Profit @13.615% 0.13615 84250.46 11470.70

Rate per 100 sqm 95721.16

Rate per 1 sqm 957.21
 A.P. Greening and Beautification Corporation
D A T A ( SOR 2022-23)

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC ,
Visakhapatnam District Andhra Pradesh. ( AMRUT 2.0 )
CFMS
Sl.No Description Qty Unit Rate Per Unit Amount
CODE
1 Supplying and fixing Gunmetal Gate ( GM ) 25 mm Nominal bore valve as per Ball valve
with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type, including cost and
conveyance of all materials , labour charges , overheads & contractors profit complete for
finished item of work.
a) 25 mm Nominal bore
MAT-
01866,
LAB- Rate as per SSR 1 No. 864.00 Each 864.00
00216
MA @ 40% 0.40 61.00 24.40
888.40
Overheads & Contractors Profit @13.615%
0.13615 888.40 120.96
Rate per Each 1009.36
2 Manufacture, Supply, & Delivery of HDPE Pipes OD 40 mm 8 kg/scm PE100 conforming to IS
4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90
mm dia. in coil & above 90 mm dia. straight length.) make as approved by the Engineer-In-
Charge including cost and conveyance of all materials to site, overheads & contractors profit
complete for finished item of work.
MAT0728 Rate as per SOR MAT07285
5 1 Rmt 57.00 1 Rmt 57.00
57.00
Overheads & Contractors Profit @13.615%
0.13615 57.00 7.76
Rate per Rmt 64.76
3 Laying, jointing of PVC/HDPE pipes as per BIS No.7634 partIII/75 for PVC and BIS No.7634
part-II/75 for HDPE pipes including trench excavation and refilling. including cost and
conveyance of all materials to site, overheads & contractors profit complete for finished item of
work.
LAB- Rate as per SOR LAB-00607
00607 1 Rmt 43.00 1 Rmt 43.00
43.00
Overheads & Contractors Profit @13.615%
0.13615 43.00 5.85
Rate per Rmt 48.85
 CFMS
Sl.No Description Qty Unit Rate Per Unit Amount
CODE
4 Supply and transportation of Supply and transportation of 63x25mm Service Saddles with PP
Clamp saddles, PP clamp Saddles shall be manufactured by injection moulding using virgin
polypropylene. Mechanical tapping saddles for water works purposes and designed for use with
PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit
around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304
metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking
water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS
304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread
dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold
brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded
type, with SS. Fasteners of size 125mm and above. make as approved by the Engineer-In-Charge
including cost and conveyance of all materials to site, overheads & contractors profit complete
for finished item of work.

Rate as per SOR MAT-08316 1 Nos. 127.00 1 each 127.00

Overheads & Contractors Profit @13.615%
0.13615 127.00 17.29

Rate per each

144.29
5 Supplying and Laying, jointing of UPVC 25 mm dia pipes 10 Kgs/cm2 for potable water supplies conforming to
IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other
Color (except White) laying, jointing of pipes as per BIS No.7634 part-III/75 for PVC, including cost of trench
excavation laying, fixing and commissioning the pipes including couplers/ bends/ tees with solvent jointing as per
standardpractice and refilling etc. including cost and conveyance of all materials to site, labour charges, overheads &
contractors profit complete for finished item of work

c) 25 mm dia
25 mm Dia 10 Kgs/cm2 1.00 RM 35.00 1 RM 35.00
Labour charges as per (Part -IV Item 12.b) 1 RM 39.00 1 RM 39.00
MA @ 40% 0.400 39.00 15.60
89.60
Overheads & Contractors Profit @13.615% 0.13615 89.60 12.20
Rate per 1 RM 101.80
 A.P. GREENING AND BEAUTIFICATION CORPORATION

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT 2.0 )

Ist and Final bill

Coefficient of coefficinet of coefficinet of

S.NO ITEM Unit
sand aggregates Garvel
Qty Sand Metal Gravel

1 Homogenious soil Cum 0.00 0.00 1.00 2283.63 0.00 0.00 2283.63
2 Earth work Cum 0.00 0.00 1.00 94.89 0.00 0.00 94.89
3 Gravel Cum 0.00 0.00 1.00 273.23 0.00 0.00 273.23
4 PCC Cum 0.45 0.90 0.00 39.99 18.00 35.99 0.00
5 Brick work Cum 0.20 0.00 0.00 4.67 0.93 0.00 0.00
6 RCC Cum 0.45 0.90 0.00 19.74 8.88 17.77 0.00
7 Plastering Cum 0.015 0.00 0.00 40.60 0.61 0.00 0.00
8 Rubble stone pitching Cum 0.11 0.28 0.00 1369.79 376.69 376.69 0.00
Total Quantity 405.11 430.45 2651.75
Seigniorage Charges
Description Unit Rate Qty Amount
Sand Cum 100.00 405.11 40511.00
Aggregate Cum 90.00 430.45 38741.00
Selected earth Cum 45.00 2651.75 119329.00
Sub Total 198,581.00
 A.P. Greening & Beautification Corporation, Vijayawada

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT
2.0 )
Bill of Quantities
Estimate Contract Value: Rs.1,21,36,326.13

S. Amount
Qty Unit Description of item Item code Rate words Unit
No. in Rs.

Earth work excavation for foundations (Manual Means) of buildings,

septic tank, sump, compound wall in ordinary soils and depositing on
bank with an initial lead of 10m and depth up to 3m including all
operational, incidental, labour charges such as shoring, sheeting, (BLD-CSTN-2- Rupees three hundred
1 587.77 Cum planking, strutting etc., and overheads & contractors profit complete for 303.97 three and ninety seven Cum 178,664.45
1)
finished item of work excluding dewatering charges etc., as per SS 20 paisa only
B(APSS 308)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate)

for foundations and under flooring bed using 162.0 kgs of cement, coarse
aggregate 40mm size hard , machine crushed granite from approved
quarry including cost and conveyance of all materials like cement, sand,
Rupees five thousand
coarse aggregate, water etc., to site, and including all charges for machine
(BLD-CSTN- three hundred seventy
2 83.23 Cum mixing, laying concrete in foundations and under flooring bed, ramming 5374.83 Cum 447,347.10
3-5) four and eighty three
in 15 cm layers finishing top surface to the required level curing etc., and
paisa only
overheads & contractors profit complete for finished item of work. (APSS
No. 402)
 Supply and fixing of C.C. Kerb not less than M30 strength of size 600 X
400 X 110 mm thick with bottom thickness of 110 mm up to height of 350
mm and top width of 50 mm thick chamfering with 45° at starts at 350
mm height to 400 mm height as selected by the Engineer-in-charge from
approved source/ factory which is laid on existing CC Bed in position to
the required line, level and curvature jointed with cement mortar 1:3 (1
cement : 3 coarse sand), including making joints with or without grooves Rupees five hundred
(thickness of joints except at sharp curve shall not to more than 5 mm), (CPWD-II-
3 410.00 Rmt 540.78 forty and seventy eight Rmt 221,719.80
including making drainage opening wherever required and including 16.69)
paisa only
cost and conveyance of all materials & labour charges including
transportation from approved source, loading & unloading charges
including contractor profit & overhead charges complete for finished
item of work..

Filling with dust in pathways with initial lead in layers not exceeding
15cm thick, watering and ramming including cost and conveyance of (BLD-CSTN-2-
water to work site and all operational, incidental, labour charges, hire 8) & Rupees nine hundred
4 86.00 Cum charges of T&P etc., and overheads & contractors profit complete for Proc.No.20938 978.80 seventy eight and eighty Cum 84,176.80
finished item of work(APSS NO.309&310) (R&B)/ Dt:14- paisa only
5-2019

Supply of precast concrete blocks for paving of M-35 grade and thickness
not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in
all shapes and designs as per the manufacturer's specification set over the
50 mm thick sand bed with hand roller compaction with joint neatly in
homogeneous or heterogeneous pattern as the colour and pattern shall
Rupees eight hundred
be as per the drawings furnished by the architect, including cost and Data as per
5 860.00 sqm 867.10 sixty seven and ten paisa sqm 745,706.00
conveyance of all materials like cement, sand, water, tiles, etc., to site SOR
only
including all operational, incidental, labour charges, laying tiles to
required slope as directed by the Engineer- in-charge etc., and
overheads & contractors profit complete for finished item of work

Clearing thin jungle growth ( more than 50 percent open space )

including bushes upto 30 cm / parthenium and other weeds including
burning or disposing off the same as directed etc., complete and it Rupees three and five
6 1500.00 Sqm including all operational, incidental, labour charges, required tools, IRR-PMW-1-1 3.05 Sqm 4,575.00
paisa only
overheads & contractors profit complete for finished item of work
 Clearing thick jungle growth ( less than 50 percent open space ) including
bushes upto 30 cm / parthenium and other weeds including burning or
disposing off the same as directed etc., complete.and it including all Rupees four and seventy
7 250.00 Sqm operational, incidental, labour charges, required tools, overheads & IRR-PMW-1-2 4.72 Sqm 1,180.00
two paisa only
contractors profit complete for finished item of work

Clearing and grubbing the land including uprooting wild vegetation,

grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal
of stumps of such trees cut earlier and disposal of unserviceable materials
and stacking of serviceable material to be used or auctioned, upto a lead Rupees two and fifty
8 250.00 Sqm of 1000 m including removal and disposal of top organic soil not RBR-STCL-2 2.57 Sqm 642.50
seven paisa only
exceeding 150 mm in thickness as per Technical Specification Clause 201
MORD / MORTH. By Mechanical Means

Excavation in all kinds of soil including boulders upto 0.3 m diameter for
canal, seating of embankment, filter drains / catch water drains etc.,
including dressing bed and sides to required level and profile, cost of all
materials, machinery, labour, placing the excavated soil neatly in dump Rupees one hundred
9 6300.00 Cum area or for the formation of service road / embankment as directed etc., (IRR-CAW-1- 140.26 forty and twenty six Cum 883,638.00
complete with initial lead upto 1 km and all lifts. including all 1)
paisa only
operational, incidental, labour charges etc., and overheads & contractors
profit complete for finished item of work.

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened

sand) using hard granite stones carted from approved quarry including
cost and conveyance of all materials like cement, screened sand,
water,Rough stone Through stone, Coursed stones etc., from approved
Rupees five thousand
quarry, to site, including labour charges for cutting stones to required ( BLD-CSTN-
10 303.25 Cum 5284.02 two hundred eighty four Cum 1,602,379.07
size and shape, mixing, of cement, mortar, construction, curing, charges 6-13 )
and two paisa only
for scaffolding etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 601 & 615)

Filling with carted gravel in pathways, trenches, sides of foundations and

basement with initial lead in layers not exceeding 15cm thick, watering (BLD-CSTN-2-
and ramming including cost and conveyance of water to work site and all 8) & Rupees five hundred
11 630.00 Cum operational, incidental, labour charges, hire charges of T&P etc., and Proc.No.20938 547.79 forty seven and seventy Cum 345,107.70
overheads & contractors profit complete for finished item of work(APSS (R&B)/ Dt:14- nine paisa only
NO.309&310) 5-2019
 Providing and constructing 30 cm thick dry rubble stone pitching with
pin headers at 2 per sqm, complete with initial lead upto 50 m and all lifts
including cost and conveyance to site including all operational,
incidental, labour charges, hand packing, laying to required slope hand Rupees four hundred
12 3150.00 Sqm packing, finishing as directed by the Engineer- in-charge etc., and IRR-CAW-8-3 485.99 eighty five and ninety Sqm 1,530,868.50
overheads & contractors profit complete for finished item of work nine paisa only

( rubble stones : 0.275 cum/sqm, Stone Chips : 0.045cum/sqm, Pin

Headers 30cm : 2/sqm)
Masonry work in CM(1:6) prop (Cement : Screened sand) in
superstructure with fly ash cement / lime solid blocks of size 290mm x
225mm x 140mm from approved source having minimum crushing
strength of 50 Kg/Sqcm. including cost and conveyance of all materials Rupees seven thousand
13 84.60 cum like cement, sand, bricks, water etc., to site,and such as labour charges, (BLD-CSTN-5- 7803.79 eight hundred three and cum 660,200.63
like mixing cement mortar, scaffolding charges, constructing masonry, 17)
seventy nine paisa only
lift charges, curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).

Plastering 12mm thick single coat in CM(1:5) using screened sand

including cost and conveyance of all materials like cement, sand, water
etc., to site and all operational, incidental charges on materials and (BLD-CSTN-8- Rupees four hundred
14 235.00 sqm including cost of all labour charges for mixing mortar, finishing, curing 3 Amendment 439.78 thirty nine and seventy sqm 103,348.30
as directed by Engineer-in-charge etc., and overheads & contractors in SoR 2016-17 eight paisa only
profit complete for finished item of work.(SS 901,903 & 904) )

Providing 0.450 m wide Coping with 16 to 18mm thick High Polished

granite up to 8'-00 (2.43 M) other than black and regular colours with
borders and design as per the pattern approved by the Engineer-in-
Charge , set over base coat of cement mortar (1:5) , 12mm thick using
screened sand over the stone ,Brick masonry or CC bed already laid ,
including neat grey cement slurry of honey like consistency spread @ 3.3
Rupees four thousand
Kg per sqm and jointed neatly with white cement paste mixed with (BLD-CSTN-9-
15 105.75 Sqm 4221.58 two hundred twenty one Sqm 446,432.09
pigment of matching shade to full depth including cost and conveyance 7)
and fifty eight paisa only
of all materials like cement , sand , water , granite slabs etc., to work site
and all operational, incidental labour & lift charges, and cost of base
coat and overheads & contractors profit complete for finished item of
work for Coping (S.S.701 & special)
 Supply & application of one coat water based cement primer of exterior
grade II and two coats of acrylic exterior emulsion paint having VOC (BLD-CSTN-
(Volatile Organic Compound) content less than 50 grams/litre for 12-2& Rupees three hundred
16 235.00 Sqm exterior walls including cost and conveyance of all materials to site,and Amendment 305.26 five and twenty six paisa Sqm 71,736.10
all operational, incidental, labour charges etc., and overheads & in SoR 2011- only
contractors profit complete for finished item of work in all floors. 12)

Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade

corresponding to IS 456 with minimum cement content of 350 kgs per 1
cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry and including
cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water, etc., to site and , centring using Steel scaffolding
(BLD-CSTN-3-
pipes , jack props , Waller’s , Foot plates , brackets , steel centring plates
13-A)
etc., including all operational, incidental and labour charges such as
machine mixing, laying concrete, vibrator, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)

For Footings
Rupees ten thousand six
17 16.28 Cum 10619.61 hundred nineteen and Cum 172,887.25
sixty one paisa only

For Pedestals
Rupees eleven thousand
18 12.06 Cum 11298.80 two hundred ninety eight Cum 136,263.53
and eighty paisa only

For Plinth Beam above the basement wall

Rupees thirteen thousand
19 28.80 Cum 13436.35 four hundred thirty six Cum 386,966.88
and thirty five paisa only
 Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade
corresponding to IS 456 with minimum cement content of 350 kgs per 1
cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate - as per IS 383 -
1970 and IS 2386 Part 1 to Part 8) from approved quarry and,including
cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site and , centring using Casurina Ballies,
20 Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,
including all operational, incidental and labour charges such as machine
mixing, lifting of concrete manually, laying concrete, vibrator, curing ,
overheads & contractors profit etc., complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402)

For Columns
Rupees thirteen thousand
12.06 Cum 13330.45 three hundred thirty and Cum 160,765.23
forty five paisa only

Providing High Yield Strength Deformed (HYSD) / Thermo

Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979)
of different diameters for RCC works , including labour charges for
straightening, cutting, bending to required sizes and shapes, placing in
position with cover blocks of approved materials and size and tying and
lap-splicing with binding wire of 18 SWG, forming grills for (BLD-CSTN-
reinforcement work as per approved designs and drawings, including 4.2)&
cost and conveyance of steel bars, including all wastages such as Amendment Rupees ninety five and
21 6069.80 Kgs 95.91 Kgs 582,154.52
overlaps, couplings, chairs, spacer bars including cost and conveyance of in SoR 2011-12 ninety one paisa only
binding wire, cover blocks and all incidental, operational, labour charges page No. 392
such as cutting, bending, placing in position, tying including overheads
& contractors profit complete for finished item of work.( APSS No.126)
 Masonry work in CM(1:6) prop (Cement : Screened sand) in
superstructure with fly ash cement / lime solid blocks of size 290mm x
225mm x 140mm from approved source having minimum crushing
strength of 50 Kg/Sqcm. including cost and conveyance of all materials Rupees seven thousand
20 55.20 Cum like cement, sand, bricks, water etc., to site,and such as labour charges, (BLD-CSTN-5- 7803.79 eight hundred three and Cum 430,769.21
like mixing cement mortar, scaffolding charges, constructing masonry, 17)
seventy nine paisa only
lift charges, curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).

Supply and fabrication of MS framed structure like Window Grills,

Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for
chain link mesh works, Roof Trusses by using square / rectangular MS
hollow section as per IS 4923 & Angles as per SP:6(1) IS Hand book, Rupees one hundred
21 11261.98 Kgs including cost of welding rods, power charges, labour charges for As per Data 127.14 twenty seven and Kgs 1,431,848.14
cutting, placing, welding and erecting in position and fixing, cost & fourteen paisa only
convenience of all materials including wastage to site and complete for
finished item of work

Supply and fabrication works like Window Grills, Compound Wall

Grills, Iron Doors, Windows, Gates, Roof Trusses by using MS solid plate
section as per IS 1730 including cost of welding rods, power charges, Rupees one hundred
22 413.56 Kgs labour charges for cutting, placing, welding & erecting in position and As per Data 138.78 thirty eight and seventy Kgs 57,393.86
fixing cost & convenience of all materials including wastage to site and eight paisa only
complete for finished item of work.
Painting to new iron work with one coat of Red oxide primer and two
coats with synthetic enamel paint Grade-I VOC (Volatile Organic
Compound) content less than 50 grams/litre over primer coat of red
oxid, including cost and conveyance of all materials like Red oxide (BLD-CSTN- Rupees two hundred
15 530.21 Sqm primer, Synthetic Enamel Paint to site, incidental, operational and all 12-7 & 12-12- 221.26 twenty one and twenty Sqm 117,314.26
labour charges etc., and overheads & contractors profit complete for 197) six paisa only
finished item of work in all floors. (SS No. 1201, 1212 & 1207).
 Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete
MIXER, 20mm size hard granite machine crushed graded metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry, using a minimum quantity of 350 kgs. of cement per 1
cum of concrete , including cost and conveyance of all materials like Rupees seven thousand
(BLD-CSTN-3-
16 6.93 Cum cement, fine aggregate (Sand), coarse aggregate, water etc., to site 7953.39 nine hundred fifty three Cum 55,116.99
13-C)
including steel centring, shuttering, machine mixing, lift charges, laying and thirty nine paisa only
concrete, vibrating, curing, overheads & contractors profit etc., complete
for finished item of work (APSS No. 402 & 403)

Providing 0.30 m wide Coping with Polished black Kadapa slabs

minimum of 25 mm to 30 mm thick in single piece as specified set over a
base coat of CM (1:5) , 12mm thick using screened sand over already laid
CC bed / RCC roof slab including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to
full depth including cost and conveyance of all materials like cement, Rupees nine hundred
(BLD-CSTN-9-
17 134.17 Sqm sand, water, flooring stones etc. complete including all labour charges 954.71 fifty four and seventy one Sqm 128,093.44
1)
like dressing of flooring stones to the required size, flat nosing the edges, paisa only
mixing of cement mortar, laying, lift charges , cost of base coat, water
charges etc., and overheads & contractors profit complete for finished
item of work (APSS No.703 & 701)

Plastering 12mm thick in two coats using screened sand with base coat of
8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with
dubara sponge finishing including cost and conveyance of all materials
like cement, sand, water etc., to site, ,, and all operational, incidental Rupees five hundred
18 662.14 Sqm charges on materials and including cost of all labour charges for mixing ( BLD-CSTN- 583.34 eighty three and thirty Sqm 386,252.75
mortar, finishing, scaffolding, lift charges, curing, including cutting 8-10)
four paisa only
grooves as directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS 901,903 & 904)
 Providing and applying PMCC / Deco orient base or Equivalent exterior
Texture ( borders and design as per the pattern approved by the
Engineer-in-Charge ) of average 2 to 3 mm thickness over plastered
surface to prepare the surface even and smooth after thoroughly
brushing the surface to remove all dirt and remains of loose powdered (BLD-CSTN-
materials, applying emery paper, Sand the surface, clean & wipe off loose 12-2& Rupees four hundred
19 662.14 Sqm dust, applying putty/ texture paint filler by putty knife / muslin pad, air Amendment 475.22 seventy five and twenty Sqm 314,662.17
dry for 2 - 3 hrs for the surface preparation including cost and in SoR 2011- two paisa only
conveyance of all materials to work site and all operational, incidental, 12)
labour charges, scaffolding charges, overheads and contractors profit etc.,
complete for finished item of work in all floors for external walls

Supply & application of one coat water based cement primer of exterior
grade II and two coats of acrylic exterior emulsion paint having VOC (BLD-CSTN-
(Volatile Organic Compound) content less than 50 grams/litre for 12-2& Rupees three hundred
20 662.14 Sqm exterior walls including cost and conveyance of all materials to site,and Amendment 305.26 five and twenty six paisa Sqm 202,124.86
all operational, incidental, labour charges etc., and overheads & in SoR 2011- only
contractors profit complete for finished item of work in all floors. 12)

Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth,

refilling with red garden soil including cost of red garden soil and
farmyard manure at 4:1 ratio, internal transportation of plants, planting
etc., including the application of fertilizers and pesticides etc.,(@ 20
gms/pit/sqmt) and it including all operational, incidental, labour
charges, required tools, overheads & contractors profit complete for
finished item of work, but excluding the cost of the fertilizers (@ 20 Rupees seven hundred
21 186.00 Sqm gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 5 As per Data 719.64 nineteen and sixty four Sqm 133,853.04
No./Sqm of plants & bag size shall be arrived based on the spacing 0.45 paisa only
c/c as per the design.)(Red garden soil in this context it is defined as
sandy loamy garden soil congenial for plant growth which shall be of
light textured, crystalline, porous and friable, fertile, slightly acidic or
neutral).

Maintenance of hedge/shrub planting: Trimming of hedges/shrubs

(once in a month) it including all operational, incidental, labour charges Rupees four hundred
100Sq/
22 186.00 Sqm for complete of work, for one month maintenance. As per Data 472.50 seventy two and fifty 878.85
month
paisa only
 Maintenance of hedge/shrub planting: Edge cutting 0.30mtr. away from
the edges/shrub (once in a month) and application of fertilizers,
insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by Rupees four hundred
100Sq/
23 186.00 Sqm manually excluding cost of fertilizers it including all operational, As per Data 464.10 sixty four and ten paisa 863.23
month
incidental, labour charges, for complete of work. for one month only
maintenance.
Maintenance of hedge/shrub planting: watering once in 2 days @ 5
Lts/per sqmt shall be provide to maintain sub soil moisture Rupees seven hundred
continuously by manually excluding cost of wateri ncluding all As per Data 100Sq/
24 186.00 Sqm 787.50 eighty seven and fifty 1,464.75
operational, incidental ,labour charges for complete of work.. for one month
paisa only
month maintenance.
Digging of 0.75x0.75x0.75 mtrs. pit, filling with soil mixture of red garden
soil, farmyard manure at 4:1 ratio including internal transport,
application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal
transportation of plants, planting the plants etc., and it including all
operational, incidental, labour charges, required tools, overheads & Rupees six hundred
25 142.00 Nos contractors profit complete for finished item of work. (excluding cost of As per Data 678.40 seventy eight and forty Each 96,332.80
plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt) paisa only
(Red garden soil in this context it is defined as sandy loamy garden soil
congenial for plant growth which shall be of light textured, crystalline,
porous and friable, fertile, slightly acidic or neutral)

Maintenance of Palms/Tree planting: Trimming (once in month) and

application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt)
(once in quarterly) by manually excluding cost of fertilizers, it including As per Data Rupees six hundred nine 100 Nos/
26 142.00 Nos 609.00 864.78
all operational, incidental ,labour charges, for complete of work for one only month
month maintenance.
Maintenance of Palms/Tree planting: formation of basins 0.30m . away
from the edges of plant (once in a month) it including all operational, Rupees one thousand 100 Nos/
27 142.00 Nos incidental ,labour charges for complete of work for one month As per Data 1092.00 1,550.64
ninety two only month
maintenance.
Maintenance of Palms/Tree planting: watering (once in three days @ 5
Lts/per plant shall be provide to maintain sub soil moisture
continuously) by manually, but excluding cost of water including all As per Data Rupees nine hundred 100 Nos/
27 142.00 Nos 945.00 1,341.90
operational, incidental ,labour charges for complete of work. for one forty five only month
month maintenance.
 Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground
covers and specified plants as per directions of officer in charge at site
including cost of plants
plants of bag size
7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet,
18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom
dia of the stem is 0.75'' and above,
21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7
feet, bottom dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown,
vigorously growing tip, healthy foliage without any infestation and the
plants shall be supplied after proper hardening off.
the rates inclusive of cost of plants and labour charges for handling &
complete for finished item of work.

Plants names Bag size

Pseuderanthemum Carruthersii Department
28 930.00 Nos 13" x 13"
supply
Department
29 792.00 Nos Nymphaeaceae Small pot
supply
Department
30 70.00 Nos Peltophorum Pterocarpum 21" x 21"
supply
Callistemon Viminalis Department
31 2.00 Nos 21" x 21"
supply
Cassia Javanica Department
32 70.00 Nos 21" x 21"
supply
Loading and unloading of plants bag size (21"X21") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P Rupees three thousand
per 100
33 142.00 Nos etc.,and overheads & contractors profit complete for finished item of As per data 3582.45 five hundred eighty two 5,087.08
nos
work (excluding cost of plant bag) and forty five paisa only
 Loading and unloading of plants bag size (13"X13") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P Rupees three hundred
per 100
34 930.00 Nos etc.,and overheads & contractors profit complete for finished item of As per data 323.41 twenty three and forty 3,007.71
nos
work (excluding cost of plant bag) one paisa only

Loading and Unloading of plants bag size (8"X10") at site of work and
stacking for lead less upto 50 m and including labour charges, T&P Rupees ninety four and per 100
35 792.00 Nos etc.,and overheads & contractors profit complete for finished item of As per data 94.22 746.22
twenty two paisa only nos
work (excluding cost of plant bag)
Total
12,136,326.13
Say ECV
12,136,326.00
Rupees one crore twenty one lakh thirty six thousand three hundred twenty six only

* The above rates are exciusive of GST & Seigniorage charges

 A.P. Greening & Beautification Corporation

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra
Pradesh. ( AMRUT 2.0 )

Lead chart as per common sor 2022-2023, cement rate as per SOR 22-23 & steel rate as per Febraury 2023 .

Reference S.No./ Initial MA

Sl. Source of to SSR Cost
Lead excluding Convey- Loading Unload
ing
No. Description Materials page Item Unit ance
in KM seigniorag Charges charges charge Total
number Code No. e charges s 40%

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
Ordinary Portland Cement 43 /
1 53 grade (including loading MAT-00005 1 MT 4220.00 4220.00
charges)

2 Reinforcement steel Fe- 500 1 MT 63000.00 63000.00

3 Reinforcement steel Fe- 415 1 MT 60000.00 60000.00
4 Mild Steel, Structural Steel 1 MT 60000.00 60000.00
5 MS flats 1 MT 60000.00 60000.00
6 M.S Plates 1 MT 70000.00 70000.00
Sand (un-screened for concrete Nagavali, Part- I 27(a)
7 1 Cum 118.00 605.00 1476.00 2081.00
items) Srikakulam (Pg:12)
Sand (screened for mortar, Nagavali, Part- I 28
8 1 Cum 118.00 700.00 1476.00 2176.00
plastering items) Srikakulam (Pg:12)
Padmanabha Part- I 27(b)
9 Sand for filling 1 Cum 42.00 460.00 564.00 1024.00
m (Pg:12)

10 Common burnt clay bricks Maddi Part- III BMT-A.01 1000 Nos 25.00 7500.00 558.30 8058.30
(23x11x7cm) (Pg:10)
Flyash cement / lime solid Part- III BMT-A- 1000 Nos
11 blocks (50 Kgs/ sq.cm) NA 0.00 30000.00 0.00 30000.00
290mmx225mmx140mm (Pg:10) 10

Flyash cement / lime solid Part- III BMT-A- 1000 Nos

12 blocks (50 Kgs/ sq.cm) NA (Pg:11) 13 0.00 14000.00 0.00 14000.00
290mmx100mmx140mm

13 Aggregates
(HBG)
40mm nominal size Kurapalli Part- I
(Pg:28) M - 055 1 Cum 30.00 965.00 405.20 1370.20

14 Aggregates
(HBG)
20mm nominal size Kurapalli Part- I
(Pg:27) M - 053 1 Cum 30.00 1565.00 405.20 1970.20

15 Aggregates 13.20 / 12.50mm

nominal size (HBG) Kurapalli Part- I
(Pg:27) M - 052 1 Cum 30.00 1260.00 405.20 1665.20

16 Aggregates 10mm nominal size Kurapalli Part- I M - 051 1 Cum 30.00 1070.00 405.20 1475.20
(HBG) (Pg:27)

17 Aggregates
(HBG)
6mm nominal size Kurapalli Part- I
(Pg:27) M - 050 1 Cum 30.00 865.00 405.20 1270.20

18 Kurapalli Part- I M - 036 1 Cum 30.00 895.00 405.20 1300.20

Aggregates 53 mm to 22.4 mm (Pg:27)
Part- I
19 Stone Chips (at quarry) Kurapalli (Pg:14) item -67 1 Cum 30.00 435.00 405.20 840.20

Stone crusher dust finer than Part- I

20 3mm with not more than10% Kurapalli (Pg:26) M - 021 1 Cum 30.00 395.00 420.00 815.00
passing 0.075 sieve.

21 Rough Stone OTG Kurapalli Part- II R& 1 1 Cum 30.00 171.45 405.20 576.65
B - (Pg:15)

22 Rough Stone (HBG) Kurapalli Part- II R& 12 1 Cum 30.00 298.00 405.20 703.20
B - (Pg:15)

23 Coursed
45 cm
Rubble Stone 30 x 30 x Kurapalli MAT-
00013 23.a 1 Cum 30.00 716.05 405.20 1121.25
 Reference S.No./ Initial MA
Sl. Source of to SSR Cost
Lead excluding Convey- Loading Unload
ing
No. Description Materials page Item Unit ance
in KM seigniorag Charges charges charge Total
number Code No. e charges s 40%

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)

24 Through
cm
stone 20x20x 30 to 45 Kurapalli Part- I
(Pg:14) item -76 1 Cum 30.00 1800.00 405.20 2205.20

25 Through
60 cm
stone 25x25x 0.45 to Kurapalli Part- I
(Pg:14) item -77 1 Cum 30.00 1432.38 405.20 1837.58

26 Un-coursed rubble stones (at Kurapalli Part- I item -79 1 Cum 30.00 373.00 405.20 778.20
quarry) (Pg:14)

27 Gravel S R Puram Part- I M - 008 1 Cum 21.00 149.00 290.40 439.40

(Pg:25)

Rough Kadapa slabs minimum Part- III

28 of 40 mm thick (0.457m x NA BMT-B.01 10 Sqm 0.00 1250.00 0.00 1250.00
0.457m) (Pg:13)

Rough Kadapa slabs minimum Part- III

29 of 50 mm thick (0.457m x NA BMT-B.02 10 Sqm 0.00 1450.00 0.00 1450.00
0.457m) (Pg:13)

Polished black Kadapa slabs Part- III BMT-B-

30 minimum of 15mm thick NA (Pg:12) 06 10 Sqm 0.00 1750.00 0.00 1750.00
(0.457m x 0.457m)

Polished black Kadapa slabs of Part- III BMT-B-

31 all sizes between 25 - 30 mm NA (Pg:12) 17 10 Sqm 0.00 1850.00 0.00 1850.00
thickness

32 Rough Shahabad / Tandur NA Part- III BMT-B.04 10 Sqm 0.00 1500.00 0.00 1500.00
stone slabs of 40 mm thick (Pg:12)

33 Rough Shahabad / Tandur NA Part- III BMT-B.03 10 Sqm 0.00 1150.00 0.00 1150.00
stone slabs of 25 mm thick (Pg:12)

Polished Shahabad / Tandur Part- III BMT-B-

34 stone slabs 15mm to 18mm NA (Pg:12) 05 10 Sqm 0.00 1900.00 0.00 1900.00
thick

High Polished Granite 16 to 18

35 mm thick up to 8'-00 (2.43 M)
other than black and regular NA Part- III
(Pg:13)
BMT-B-
10 1 Sqm - 2500.00 2500.00
colours

High Polished Granite 16 to 18 Part- III BMT-B-

36 mm thick up to 8'-00 (2.43 M) NA (Pg:13) 11 1 Sqm - 2100.00 2100.00
black.
 Joinery data 77

A.P. Greening & Beautification Corporation

D A T A ( SOR 2022-23)
Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District
Andhra Pradesh. ( AMRUT 2.0 )
CFMS code
a) Labour charges for wrought and put up (BLD-CSTN-13-1)
LAB-00004 1st class carpenter 5.31 Nos. 705.00 1 Each 3743.55
LAB-00060 2nd class carpenter 12.39 Nos. 565.00 1 Each 7000.35
LAB-00120 Man Mazdoor 8.80 Nos. 525.00 1 Each 4620.00
Labour charges per 1 cum 15363.90

b) Labour charges for aluminium doors ( S.No.11 of Page No. 396 of SoR 2011-12 )
LAB-00004 1st class carpenter 0.099 Nos. 705.00 Each 69.80
LAB-00091 2nd class carpenter 0.198 Nos. 565.00 Each 111.87
LAB-00004 Power Saw Cutter -Hand Operated -Operator 0.099 Nos. 705.00 Each 69.80
LAB-00004
Power Drill -Hand Operated -Operator 0.099 Nos. 705.00 Each 69.80
LAB-00120 Mazdoor(Unskilled) 0.297 Nos. 525.00 Each 155.92
LAB-00010 Non-technical work inspector 0.099 Nos. 685.00 Each 67.82
MA @ 40% 0.40 545.00 218.00
Machinery
HIR-00206 Power Saw Cutter -Hand Operated -Hire
charges 0.793 Hrs 132.00 1 Hour 104.68
HIR-00207 Power Drill -Hand Operated -Hire charges 0.793 Hrs 121.00 1 Hour 95.95
963.62
Power charges for Motors 1% 0.01 963.62 9.64
Labour charges per 1 sqm 973.26

c) Labour charges for aluminium sliding windows ( S.No.10 of Page No. 395 of SoR 2011-12 )
LAB-00004 1st class carpenter 0.096 Nos. 705.00 Each 67.68
LAB-00060 2nd class carpenter 0.289 Nos. 565.00 Each 163.29
LAB-00004 Power Saw Cutter -Hand Operated -Operator 0.096 Nos. 705.00 Each 67.68
LAB-00004
Power Drill -Hand Operated -Operator 0.096 Nos. 705.00 Each 67.68
LAB-00120 Mazdoor(Unskilled) 0.289 Nos. 525.00 Each 151.73
LAB-00010 Non-technical work inspector 0.096 Nos. 685.00 Each 65.76
MA @ 40% 0.40 583.81 233.52
C.Machinery
HIR-00206 Power Saw Cutter -Hand Operated -Hire
charges 0.771 Hrs 132.00 1 Hour 101.77
HIR-00207 Power Drill -Hand Operated -Hire charges 0.771 Hrs 121.00 1 Hour 93.29
1012.40
Power charges for Motors 1% 0.01 1012.40 10.12
Labour charges per 1 sqm 1022.52

d) Labour charges for aluminium partitions partly glazed ( S.No.8 of Page No. 394 of SoR 2011-12 )
LAB-00004 1st class carpenter 0.434 Nos. 705.00 Each 305.97
LAB-00060 2nd class carpenter 0.434 Nos. 565.00 Each 245.21
LAB-00004
Power Saw Cutter -Hand Operated -Operator 0.043 Nos. 705.00 Each 30.31
LAB-00004
Power Drill -Hand Operated -Operator 0.058 Nos. 705.00 Each 40.89
LAB-00120 Mazdoor(Unskilled) 0.145 Nos. 525.00 Each 76.13
LAB-00010 Non-technical work inspector 0.072 Nos. 685.00 Each 49.32
MA @ 40% 0.40 747.83 299.13
C.Machinery
HIR-00206 Power Saw Cutter -Hand Operated -Hire
charges 0.347 Hrs 132.00 1 Hour 45.80
HIR-00207 Power Drill -Hand Operated -Hire charges 0.463 Hrs 121.00 1 Hour 56.02
1148.79
Power charges for Motors 1% 0.01 1148.79 11.49
Labour charges per 1 sqm 1160.28

e) Labour charges for aluminium casement windows ( S.No.9 of Page No. 394 of SoR 2011-12 )
LAB-00004 1st class carpenter 0.100 Nos. 705.00 Each 70.50
 Joinery data 78

LAB-00060 2nd class carpenter 0.300 Nos. 565.00 Each 169.50

LAB-00004 Power Saw Cutter -Hand Operated -Operator 0.100 Nos. 705.00 Each 70.50
LAB-00004
Power Drill -Hand Operated -Operator 0.100 Nos. 705.00 Each 70.50
LAB-00120 Mazdoor(Unskilled) 0.300 Nos. 525.00 Each 157.50
LAB-00010 Non-technical work inspector 0.100 Nos. 685.00 Each 68.50
MA @ 40% 0.40 607.00 242.80
C.Machinery
HIR-00206 Power Saw Cutter -Hand Operated -Hire
charges 0.800 Hrs 132.00 1 Hour 105.60
HIR-00207 Power Drill -Hand Operated -Hire charges 0.800 Hrs 121.00 1 Hour 96.80
1052.20
Power charges for Motors 1% 0.01 1052.20 10.52
Labour charges per 1 sqm 1062.72

11 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all
sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6
Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated
fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2
Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical
frame of door shall be embedded in flooring for a depth of not less than 10 mm) (2000mm x 2100mm)

(BLD-CSTN-13-1)
Size : 2.00m x 2.10m 4.20 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 2.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04043 cum

30 mm thick flush shutter 2 x 0.95 x 2.05 3.895 sqm

MAT-00847 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 Cost of medium TW frame up to 2 m length 0.01300 cum 81950.00 1 cum 1065.35
MAT-01345 Cost of 30 mm thick flush shutter 3.895 sqm 1400.00 1 sqm 5453.00
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
MAT-00921 Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
MAT-00935 Cost of MS powder coated butt hinges
Cost
150mm of long
MS powder coated aldrop 300mm 6 Nos. 39.00 Each 234.00
MAT-00950 Cost
long of MS powder coated handle 150mm 1 No. 154.00 Each 154.00
MAT-00941 long 2 Nos. 49.00 Each 98.00
MAT-00958 Cost of MS powder coated door stopper 2 Nos. 45.00 Each 90.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for frame work 0.04043 cum 15363.90 1 cum 621.16
MA @ 40% 0.40 621.16 248.46
LAB-00429
Labour charges for fixing flush door shutter to
the frame , fixing the fixtures to the shutter 3.895 sqm 421.00 1 sqm 1639.80
MA @ 40% 0.40 1639.80 655.92
Add for nails & screws etc. 3.32
Rate for 4.20 sqm 13102.14
Rate for 1 sqm 3119.56
Overheads & Contractors Profit @13.615% 0.13615 3119.56 424.73
Rate for 1 sqm 3544.28
 Joinery data 79

12 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all
sides including cost and conveyance to site of teak wood frame, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS
powder coated fixtures of 6 Nos. butt hinges (IS:205)150mm long, 1 No. aldrop (IS:2681) 300mm long, 2
Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical
frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1800mm x 2100mm)

(BLD-CSTN-13-1)
Size : 1.80m x 2.10m 3.78 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.80
= 1.80 x 0.10 x 0.065 0.01170 cum
0.03913 cum

30 mm thick flush shutter 2 x 0.85 x 2.05 3.485 sqm

MAT-00847 Cost of medium TW frame 2 m to 3m length 0.0274 cum 92130.00 1 cum 2527.13
MAT-00846 Cost of medium TW frame up to 2 m length 0.0117 cum 81950.00 1 cum 958.82
MAT-01345 Cost of 30 mm thick flush shutter 3.485 sqm 1400.00 1 sqm 4879.00
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
MAT-00921 Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
MAT-00935 Cost of MS powder coated butt hinges
Cost
150mm of long
MS powder coated aldrop 300mm 6 Nos. 39.00 Each 234.00
MAT-00950 Cost of MS powder coated handle 150mm
long 1 No. 154.00 Each 154.00
MAT-00941 long 2 Nos. 49.00 Each 98.00
MAT-00958 Cost of MS powder coated door stopper 2 Nos. 45.00 Each 90.00
Cost of Rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for frame work 0.03913 cum 15363.90 1 cum 601.19
MA @ 40% 0.40 601.19 240.48
LAB-00429
Labour charges for fixing flush door shutter to
the frame , fixing the fixtures to the shutter 3.49 sqm 421.00 1 sqm 1467.19
MA @ 40% 0.40 1467.19 586.87
Add for nails & screws etc. 5.45
Rate for 3.78 sqm 12154.12
Rate for 1 sqm 3215.37
Overheads & Contractors Profit @13.615% 0.13615 3215.37 437.77
Rate for 1 sqm 3653.15
Say 3653

13 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all
sides including cost and conveyance to site of teak wood frame, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS
powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2
Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door
stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt
and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical
frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm)

(BLD-CSTN-13-1)
 Joinery data 80

Size : 1.50m x 2.10m 3.15 Sqm

Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.50
= 1.50 x 0.10 x 0.065 0.00975 cum
0.03718 cum

30 mm thick flush shutter 2 x 0.70 x 2.05 2.87 sqm

MAT-00847 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 Cost of medium TW frame up to 2 m length 0.00975 cum 81950.00 1 cum 799.01
MAT-01345 Cost of 30 mm thick flush shutter 2.87 sqm 1400.00 1 sqm 4018.00
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
MAT-00921 Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
MAT-00935 Cost of MS powder coated butt hinges
Cost
150mm of long
MS powder coated aldrop 300mm 6 Nos. 39.00 Each 234.00
MAT-00950 Cost of MS powder coated handle 150mm
long 1 No. 154.00 Each 154.00
MAT-00941 long 2 Nos. 49.00 Each 98.00
MAT-00958 Cost of MS powder coated door stopper 2 Nos. 45.00 Each 90.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for frame work 0.03718 cum 15363.90 1 cum 571.23
MA @ 40% 0.40 571.23 228.49
LAB-00429
Labour charges for fixing flush door shutter to
the frame , fixing the fixtures to the shutter 2.87 sqm 421.00 1 sqm 1208.27
MA @ 40% 0.40 1208.27 483.31
Add for nails & screws etc. 5.89
Rate for 3.15 sqm 10729.33
Rate for 1 sqm 3406.14
Overheads & Contractors Profit @13.615% 0.13615 3406.14 463.75
Rate for 1 sqm 3869.88
Say 3870

55 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all
sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6
Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated
fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2
Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including
overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical
frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)

(BLD-CSTN-13-1)
Size : 1.20m x 2.10m 2.52 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.20
= 1.20 x 0.10 x 0.065 0.00780 cum
0.03523 cum

30 mm thick flush shutter 2 x 0.55 x 2.05 2.255 sqm

MAT-00847 Cost of medium TW frame 2 m to 3m length 0.0274 cum 92130.00 1 cum 2527.13
MAT-00846 Cost of medium TW frame below 2 m length 0.0078 cum 81950.00 1 cum 639.21
MAT-01345 Cost of 30 mm thick flush shutter 2.255 sqm 1400.00 1 sqm 3157.00
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
MAT-00921 Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
 Joinery data 81

MAT-00935 Cost of MS powder coated butt hinges

Cost
150mm of long
MS powder coated aldrop 300mm 6 Nos. 39.00 Each 234.00
MAT-00950 Cost
long of MS powder coated handle 150mm 1 No. 154.00 Each 154.00
MAT-00941 long 2 Nos. 49.00 Each 98.00
MAT-00958 Cost of MS powder coated door stopper 2 Nos. 45.00 Each 90.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for frame work 0.035 cum 15363.90 1 cum 541.27
MA @ 40% 0.40 541.27 216.51
LAB-00429
Labour charges for fixing flush door shutter to
the frame , fixing the fixtures to the shutter 2.255 sqm 421.00 1 sqm 949.35
MA @ 40% 0.40 949.35 379.74
Add for nails & screws etc. 6.34
Rate for 2.52 sqm 9304.55
Rate for 1 sqm 3692.28
Overheads & Contractors Profit @13.615% 0.13615 3692.28 502.70
Rate for 1 sqm 4194.99
Say 4195

56 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and
ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core
having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic
resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all
sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6
Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated
fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt
(IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No.
rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including
labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads &
contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door
shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2100mm)

(BLD-CSTN-13-1)
Size : 1.00m x 2.10m 2.10 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650 cum
0.03393 cum

30 mm thick flush shutter 0.90 x 2.05 1.845 sqm

Cost analysis
MAT-00847 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 Cost of medium TW frame up to 2 m length 0.00650 cum 81950.00 1 cum 532.68
MAT-01345 Cost of 30 mm thick flush shutter 1.845 sqm 1400.00 1 sqm 2583.00
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
MAT-00921 Cost of MS powder coated tower bolt 200mm
long 1 No. 56.00 Each 56.00
MAT-00935 Cost of MS powder coated butt hinges
Cost
150mm of long
MS powder coated aldrop 300mm 3 Nos. 39.00 Each 117.00
MAT-00950 Cost of MS powder coated handle 150mm
long 1 No. 154.00 Each 154.00
MAT-00941 long 2 Nos. 49.00 Each 98.00
MAT-00958 Cost of MS powder coated door stopper 1 No. 45.00 Each 45.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Labour charges for frame work 0.0339 cum 15363.90 1 cum 521.30
MA @ 40% 0.40 521.30 208.52
LAB-00429
Labour charges for fixing flush door shutter to
the frame , fixing the fixtures to the shutter 1.845 sqm 421.00 1 sqm 776.75
MA @ 40% 0.40 776.75 310.70
Add for nails & screws etc. 6.30
Rate for 2.10 sqm 8111.36
Overheads & Contractors Profit @13.615% 0.13615 8111.36 1104.36
9215.72
 Joinery data 82

Rate for 1 sqm 4388.44

Say 4388

53 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin
factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos.
MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3
Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200
mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges
for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded
in flooring for a depth of not less than 10 mm) (900mm x 2100mm)

(BLD-CSTN-13-1)
Size : 0.90m x 2.10m 1.89 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.90
= 0.90 x 0.10 x 0.065 0.00585 cum
0.03328 cum

30 mm thick flush shutter 0.80 x 2.05 1.64 sqm

Cost analysis
MAT-00847 Cost of medium TW frame 2 m to 3m length 0.02743 cum 92130.00 1 cum 2527.13
MAT-00846 Cost of medium TW frame up to 2 m length 0.00585 cum 81950.00 1 cum 479.41
MAT-01345 Cost of 30 mm thick flush shutter 1.64 sqm 1400.00 1 sqm 2296.00
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
MAT-00921 Cost of MS powder coated tower bolt 200mm
long 1 No. 56.00 Each 56.00
MAT-00935 Cost of MS powder coated butt hinges
Cost
150mm of long
MS powder coated aldrop 300mm 3 Nos. 39.00 Each 117.00
MAT-00950 Cost of MS powder coated handle 150mm
long 1 No. 154.00 Each 154.00
MAT-00941 long 2 Nos. 49.00 Each 98.00
MAT-00958 Cost of MS powder coated door stopper 1 No. 45.00 Each 45.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Labour charges for frame work 0.03328 cum 15363.90 1 cum 511.31
MA @ 40% 0.40 511.31 204.52
LAB-00429
Labour charges for fixing flush door shutter to
the frame , fixing the fixtures to the shutter 1.64 sqm 421.00 1 sqm 690.44
MA @ 40% 0.40 690.44 276.18
Add for nails & screws etc. 4.78
Rate for 1.89 sqm 7634.76
Overheads & Contractors Profit @13.615% 0.13615 7634.76 1039.47
8674.24
Rate for 1 sqm 4589.54
Say 4590

54 Supply and fixing of toilet door shutter with frame made of M.S. door frame of 5mmX48mmX48mm (L angel)
as allround frame the frame is coated with one coat of red oxide and two coats of enamel of approved color.
For shutter and the shutter is made with 16mm Bison Lam shutter with allround ‘U’ Lipping of PPS section of
12mmX18mmX12mmX0.60mm, along hardware of 200m long and 12mm dia aluminum aldrop( ISI make)2
Nos, 2Nos of 125m m handle, 3 Nos of RT patte hinges IS 304gr SS 2mmX12mmX180mm long with a pole
receiver of 10mmDia X 40mm by welded on 3mmX40mm SS 304, plate it works as receiver for RT Patee
hinges it is welded to M.S. angle . M.S. angle will be fixed to wall of self expandable screws and caps.
including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site
with templates for casement sizing overheads and contractors profit etc., complete for finished item of work
(750mm x 2100mm )
 Joinery data 83

MAT-01399
BM Rate as per SSR 1.00 Sqm 4100.00 1.00 Sqm 4100.00
T-
N.70
Overheads & Contractors Profit @13.615% 0.14 4100.00 558.21
Rate for 1 Sqm 4658.22

55 Providing and fixing of Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x 50 mm
have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for horizontal bars welded at a regular
pitch of 150mm to 12mm x 6 mm MS flat. made of Galvanized Steel (Base Steel as per IS 513, D quality,
galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure
polyester powder upto 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58
mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision size of 90 mm
x 50 mm and the Window Shutter section of 0.58 mm x 36 mm and the outer Frame with two integrated
guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with
a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of
reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Alumimium 1
No. per each shutter and cut to length miter joined with corner brackets including installation of window
system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of
conveyance of all materials accessories, labour charges, and erection at site with complete finished item of
work.

MAT-01447 BM
T-
P.39 Rate as per SSR 1.00 Sqm 6324.00 1.00 Sqm 6324.00

Overheads & Contractors Profit @13.615% 0.13615 6324.00 861.01

Rate for 1 Sqm 7185.01
56 Providing, supplying & fixing of Single fixed Louvers Ventilator made made of prepainted steel (Base steel as
per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester
paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section
for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a
provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion
fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder
coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass
with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws,
Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site,
overheads and contractor profit etc., complete for finished item of work

MAT-01468 BM Rate as per SSR 1.00 Sqm 4062.00 1.00 Sqm 4062.00
T- Overheads & Contractors Profit @13.615% 0.13615 4062.00 553.04
P.60
Rate for 1 Sqm 4615.04
Say 4615
 A.P. Greening and Beautification Corporation
D A T A ( SOR 2022-23)

Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam
District Andhra Pradesh. ( AMRUT 2.0 )

Sl.No CFMS CODE Description Qty Unit Rate Per Unit Amount
1 Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 &
4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket
pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the
required slope including cost and conveyance of all materials to site and all labour charges ,
overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)

a) 101.60mm dia upto 914.40mm (3') depth

MAT-01668 Rate as per SSR 1.00 RM 417.00 1 RM 417.00
Overheads & Contractors Profit @13.615%
0.13615 417.00 56.77
Rate per 1 RM 473.77
say 474
b) 152.40mm dia upto 1524.0mm (5') depth

MAT-01669 Rate as per SSR 1.00 RM 620.00 1 RM 620.00

Overheads & Contractors Profit @13.615%
0.13615 620.00 84.41
704.41
Rate per 1 RM say 704

c) 203.20mm dia upto 1524mm (5') depth

MAT-01677 Cost of SWG pipe 1.00 RM 448.00 1 RM 448.00
LAB-00412 labour charges for laying , jointing , testing 1.00 RM 323.00 1 RM 323.00
MA @ 40% 0.40 323.00 129.20
900.20
Overheads & Contractors Profit @13.615%
0.13615 900.20 122.56
Rate per 1 RM 1022.76
say 1023

d) 254mm dia upto 1524mm (5') depth

MAT-01678 Cost of SWG pipe 1.00 RM 821.00 1 RM 821.00
LAB-00412 labour charges for laying, jointing, testing 1.00 RM 323.00 1 RM 323.00
MA @ 40% 0.40 323.00 129.20
1273.20
Overheads & Contractors Profit @13.615%
0.13615 1273.20 173.35
Rate per 1 RM 1446.55
say 1447

e) 300mm dia upto 1524mm (5') depth

MAT-01679 Cost of SWG pipe 1.00 RM 1183.00 1 RM 1183.00
LAB-00412 labour charges for laying , jointing , testing 1.00 RM 323.00 1 RM 323.00
MA @ 40% 0.40 323.00 129.20
1635.20
Sl.No CFMS CODE Description Qty Unit Rate Per Unit Amount
Overheads & Contractors Profit @13.615%
0.13615 1635.20 222.63
Rate per 1 RM 1857.83
say 1858

2 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-
1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5 N/sq.mm including plastering with
cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils
(excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and
P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including
cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of
seigniorage charges on all materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit
etc., complete for finished item of work as per Standard specification.

Rate as per SSR 1 No. 6118.00 Each 6118.00

Overheads & Contractors Profit @13.615%
0.13615 6118.00 832.97
6950.97
Rate per Each say 6951

3 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-
1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5 N/sq.mm including plastering with
cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole
covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils
(excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and
P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including
cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of
seigniorage charges on all materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit
etc., complete for finished item of work as per Standard specification.

MAT-05236 Rate as per SSR 1 No. 9557.00 Each 9557.00

Overheads & Contractors Profit @13.615%
0.13615 9557.00 1301.19
10858.19
Rate per Each say 10858

4 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651
& 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate
chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of
standard make as approved including cost and conveyance of all materials to site, labour charges,
overheads & contractors profit etc., complete for finished item of work.

MAT-01732 Rate as per SSR 1 No. 533.00 1 Each 533.00

MAT-02181, Deduct cost of CI frame and cover
LAB-00291 1 No. 122.00 1 No. -122.00
Sl.No CFMS CODE Description Qty Unit Rate Per Unit Amount
Add for RCC Cover 1 No. 132.00 1 No. 132.00
543.00
Overheads & Contractors Profit @13.615%
0.13615 543.00 73.93
616.93
Rate per Each say 617

5 Supplying and fixing of 3" (76.2mm) multi floor trap with jali - UPVC/SWR pipe fittings as
per site requirements with standard practice for all floors including cost and conveyance of all
materials to site, labour charges , overheads & contractors profit etc., complete for finished item
of work.
MAT-02005 Rate as per SSR 1 No. 93.00 1 Each 93.00
Overheads & Contractors Profit @13.615%
0.13615 93.00 12.66
105.66
Rate per Each say 106

6 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as
per site requirements with standard practice for all floors including cost and conveyance of all
materials to site, labour charges , overheads & contractors profit etc., complete for finished item
of work.

MAT-02006 Rate as per SSR 1 No. 133.00 1 Each 133.00

Overheads & Contractors Profit @13.615%
0.13615 133.00 18.11
151.11
Rate per Each say 151

57 Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st
quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and
providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level
cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x
101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop
cock 12.70mm dia. first quality Indian make heavy duty, 12.70mm PVC connection with brass
union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be
encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc.,
complete including cost and conveyance of all materials to site, cost of CC bed, labour charges
and seigniorage charges, overheads & contractors profit etc., complete for finished item of work.

MAT-01783, 1 Cost of Orissa pan

LAB-00165 1 No. 1551.00 1 Each 1551.00
MAT-01783, Add MA on labour charges for fixing
LAB-00165 Orissa pan 0.40 428.00 171.20
MAT-01786 2 Cost of Brick masonry seat 1 No. 303.00 1 Each 303.00
MAT-01787 3 Cost of C C squatting plate 1 No. 90.00 1 Each 90.00
MAT-01895 4 Cost of slim line PVC flush tank 10 Ltrs.
capacity single flush 1 No. 1390.00 1 Each 1390.00
MAT-01812, 5 Angle stop cock 12.70mm 1 No. 453.00 1 Each 453.00
LAB-00178
MAT-01812, Add MA on labour charges for fixing angle
LAB-00178 stop cock 0.40 49.00 19.60
Sl.No CFMS CODE Description Qty Unit Rate Per Unit Amount
MAT-02172, 6 12.70mm PVC connection with brass union
LAB-00282 nuts 1 No. 95.00 1 Each 95.00
MAT-02172, Add MA on labour charges for fixing PVC
LAB-00282 connection with brass union nuts 0.40 19.00 7.60
MAT-01815, 7 31.75mm brass plumber union 1 No. 68.00 1 Each 68.00
LAB-00181
MAT-01815, Add MA on labour charges for fixing
LAB-00181 31.75mm brass plumber union 0.40 16.00 6.40
LAB-00280 8 Cutting holes in brick masonry 1 No. 54.00 1 Each 54.00
Add MA on labour charges for cutting
holes in brick masonry 0.40 54.00 21.60
MAT-02171, 9 Teak wood blocks 76.2mm x 101.6mm 2 Nos. 25.00 1 Each 50.00
LAB-00277
MAT-02171, Add MA on labour charges for fixing Teak
LAB-00277 wood blocks 0.40 11.00 4.40
4284.80
Overheads & Contractors Profit @13.615%
0.13615 4284.80 583.38
4868.18
Rate per Each 4868
58 Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-
1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for
European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity
single flush PVC low level cistern with internal components and fixed using required size of
nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC
connections with brass union nuts CP coated including cost and conveyance of all materials to
site, overheads & contractors profit etc., complete for finished item of work for all floors.

MAT-01790, Cost of EWC with 'S' trap

LAB-00168 1 No 1889.00 1 Each 1889.00
MAT-01790, Add MA on labour charges for fixing EWC
LAB-00168 0.40 300.00 120.00
MAT-01895 Supply and fixing of 10 lts. Capacity
lowdown PVC flushing tank 1 No 1390.00 1 Each 1390.00
MAT-01791, Plastic seat and lid for European Water
LAB-00169 Closet and rubber buffers 1 No 850.00 1 Each 850.00
MAT-01791, Add MA on labour charges for fixing
LAB-00169 Plastic seat and lid for EWC and rubber
buffers 0.40 87.00 34.80
MAT-01812,
LAB-00178 Angle stop cock 12.70mm 1 No. 453.00 1 Each 453.00
MAT-01812, Add MA on labour charges for fixing angle
LAB-00178 stop cock 0.40 49.00 19.60
MAT-02172, 12.70mm dia PVC connection with brass
LAB-00282 union nuts 1 No 95.00 1 Each 95.00
MAT-02172, Add MA on labour charges for fixing PVC
LAB-00282 connection with brass union nuts 0.40 19.00 7.60
LAB-00280 Cutting holes in brick masonry 1 No. 54.00 1 Each 54.00
Add MA on labour charges for cutting
holes in brick masonry
0.40 54.00 21.60
MAT-02171, Cost of 76.2 x 101.60 mm teakwood blocks
LAB-00277 2 Nos 25.00 1 Each 50.00
Sl.No CFMS CODE Description Qty Unit Rate Per Unit Amount
MAT-02171, Add MA on labour charges for fixing Teak
LAB-00277 wood blocks 0.40 11.00 4.40
4989.00
Overheads & Contractors Profit @13.615%
0.13615 4989.00 679.25
5668.25
59 Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to
IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with
parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium
Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets
including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated ,
angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible
waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site,
labour charges , overheads & contractors profit for finished item of work

MAT-01798,
LAB-00170 Cost of Wash hand basin 1 No. 1736.00 1 Each 1736.00
MAT-01798, Add MA on labour charges for fixing Wash
LAB-00170 hand basin 0.40 362.00 144.80
MAT-01812,
LAB-00178 Angle stop cock 12.70mm 1 No. 453.00 1 Each 453.00
MAT-01812, Add MA on labour charges for fixing angle
LAB-00178 stop cock 0.40 49.00 19.60
MAT-02172, 12.70mm PVC connection with brass union
LAB-00282 nuts 1 No. 95.00 1 Each 95.00
MAT-02172, Add MA on labour charges for fixing PVC
LAB-00282 connection with brass union nuts 0.40 19.00 7.60
MAT-02158, Deduct cost of NP chain and rubber plug
LAB-00266 1 No. 41.00 1 Each -41.00
MAT-01892 31.75mm dia. PVC flexible waste pipe 1 No. 24.00 1 Each 24.00
2439.00
Overheads & Contractors Profit @13.615%
0.13615 2439.00 332.07
2771.07

60 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315
mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer)
conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing
12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st
quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist
quality including cost and conveyance of all materials to site, labour charges , overheads &
contractors profit complete for finished item of work for all floors.
Rate as per SSR 1 No 898.00 Each 898.00
MA @ 40% 0.40 144.00 57.60
12.7mm PVC connections with brass
plumber union nuts 1 No 95.00 Each 95.00
MA @ 40% 0.40 19.00 7.60
12.70mm NP push cock 1 No 259.00 Each 259.00
31.75mm dia. PVC flexible waste pipe 1 No 24.00 Each 24.00
1341.20
Overheads & Contractors Profit @13.615%
0.13615 1341.20 182.60
Sl.No CFMS CODE Description Qty Unit Rate Per Unit Amount
1523.80
 A.P. Greening & Beautification Corporation
D A T A ( SOR 2022-23)
Datas for Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam
District Andhra Pradesh. ( AMRUT 2.0 )
Sl. Amount in
Ref. Code Description Qty Unit Rate in Rs. Unit
No: Rs.
1 LANDSCAPE DEVELOPMENT WORKS
1.2 Hedge / Shrub Plantation in Trenches
Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth,
refilling with red garden soil including cost of red garden soil and
farmyard manure at 4:1 ratio, internal transportation of plants, planting
etc., including the application of fertilizers and pesticides etc.,(@ 20
gms/pit/sqmt) and it including all operational, incidental, labour
charges, required tools, overheads & contractors profit complete for
finished item of work, but excluding the cost of the fertilizers (@ 20
gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 5
10
No./Sqm of plants & bag size shall be arrived based on the spacing 0.45
c/c as per the design.)(Red garden soil in this context it is defined as
sandy loamy garden soil congenial for plant growth which shall be of
light textured, crystalline, porous and friable, fertile, slightly acidic or
neutral)

Unit = 1 Sq.m.
A). Materials:
As per Red garden soil 0.288 Cum Cum 259.20
Quotation 900.00
FYM (cost & conveyance of 0.072 Cum 1757.54 Cum 126.54
dry cow dung powder or
Vishakhapat
FYM)
nam Circle-
FSR 22-23
(Code: 05-
35-6)
B). Labour:
(BLD- Digging of trenches ordinary 0.45 Cum 191.10 Cum 86.00
CSTN-2-1) soils (as per bldg.data)
Homogeneous mixing of red 0.36 Cum Cum 17.67
Gunter-Circl garden soil and FYM
FSR 22-23
49.08
item sl.no: -
01-02-006

Page 90 of 333
Sl. Amount in
Ref. Code Description Qty Unit Rate in Rs. Unit
No: Rs.
Internal Transportation of red 0.36 Cum Cum 27.00
garden soil and FYM
(conveyance charges for
CSSR 22-23 materials by head load. -
pg.No.39 Lead may be considered as 75.000
(A) per respective common SoR
while finalizing the rate)

RSSR-21-22 Spreading/filling of red 0.36 Cum 29.71 Cum 10.70

item sl. garden soil & FYM
No:14
Internal Transportation of 5.00 Nos 1.530 each 7.65
bag plants to the planting
points [RSSR item sl.no: 20
Gunter-Circl d.(i)] *5 No. of plants &
FSR-22-23 ; bag size shall be arrived
02-02-018 based on the spacing as per
the design.

CSSR -22-23 Planting [RSSR 20.e (i)] 5 nos. 4.47 each 22.35
Part- I (labour charges for re-filling
(LAB- of pits and planting and
00120) stacking sticks excluding cost
of stick. *5 No. of plants
CSSR -22-23 Mazdoor for application of 0.002 Nos 525 per day 1.05
Part- I fertilizers (Observed Data)
(LAB-
00120)
MA @ 40% 0.40 172.42 68.97
Sub-total 627.13
C).Water charges @ 1% on
sub-total 0.010 627.13 6.27

Overheads & Contractors

Profit @13.615% 0.13615 633.40 86.24
Rate per Sqmt = (A+B+C) 719.64
Digging of 0.75x0.75x0.75 mtrs. pit, filling with soil mixture of red
garden soil, farmyard manure at 4:1 ratio including internal transport,
application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal
transportation of plants, planting the plants etc., and it including all
operational, incidental, labour charges, required tools, overheads &
contractors profit complete for finished item of work. (excluding cost of
11 plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)
(Red garden soil in this context it is defined as sandy loamy garden soil
congenial for plant growth which shall be of light textured, crystalline,
porous and friable, fertile, slightly acidic or neutral)

Page 91 of 333
Sl. Amount in
Ref. Code Description Qty Unit Rate in Rs. Unit
No: Rs.
Unit = 1 no.
A). Materials:
As per Red garden soil 0.272 Cum 900.00 Cum 244.80
Quotation
FYM (cost & conveyance of 0.064 Cum 1757.54 Cum 112.48
Vishakhapat dry cow dung powder or
nam Circle- FYM) (FSR item sl.no:
FSR 22-23 2.19.008
(Code: 05-
35-6)
B). Labour:
Digging of Pit in ordinary 0.42 Cum 238.88 Cum 100.33
(BLD- soils (as per bldg.data)
CSTN-2-1)

Homogeneous mixing of soil 0.336 Cum 49.08 Cum 16.49

Gunter-Circl and FYM (FSR item sl.no:
FSR 22-23 01.02.006)
item sl.no: -
01-02-006

Internal Transportation of red 0.336 Cum 75.000 Cum 25.20

garden soil and FYM
(conveyance charges for
CSSR 22-23 materials by head load. -
pg.No.39 Lead may be considered as
(A) per respective common SoR
while finalizing the rate)

Internal transportation of bag 0.025 Nos. 525.00 each 13.13

CSSR -22-23 plants for bag size (21"X21")
Part- I to the planting points
(LAB-
00120) (Observed Data)

Planting [RSSR 20.e.(average 1 No 11.40 each 11.40

rate of iii & iv)] (labour
RSSR-21-22 charges for re-filling of pits
item sl. and planting and stacking
No:18.e. iii sticks excluding cost of
stick.)

Mazdoor for application of 0.001 No 525.00 per day 0.53

CSSR -22-23 fertilizers (Observed Data)
Part- I
(LAB-
00120)

Page 92 of 333
Sl. Amount in
Ref. Code Description Qty Unit Rate in Rs. Unit
No: Rs.
MA @ 40% 0.40 167.08 66.83
Sub-total 591.19
C).Water charges @ 1% on
sub-total 0.010 591.19 5.91

Overheads & Contractors

Profit @13.615% 0.13615 597.10 81.30
Total per each = (A+B+C) 678.40

APUGBCL Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once in a

12 2.2 A month) it including all operational, incidental, labour charges for complete of work,

Unit = 100 Sqmt per month

A). Trimming of hedges/

shrubs once in a month.
Based on the time motion
study, 0.90 man-day is
worked out for 100 Sqmts =
0.9 man-days per 100 Sqmts
per one month.
0.9 nos. 525 day 472.50
Total rate per 100 Sqmt per
month 472.50
APUGBCL Maintenance of hedge/shrub planting: Edge cutting 0.30mtr. away from the
2.2 B edges/shrub (once in a month) and application of fertilizers, insecticides, Fungicides
13 (once in a month @ 20 gms/pit/sqmt) etc., by manually excluding cost of fertilizers it
including all operational, incidental, labour charges, for complete of work.

Unit = 100 Sqmt per month

A). Edge cutting 0.30m away

from the hedge, once in 30
days.
Based on the time motion
study, one man-day is
worked out for 140 RMT i.e.
140 Sqmts. or 0.714 man-
days for 100 Sqmts, or 100
RMT.
0.714 nos. 525 day 374.85

Page 93 of 333
Sl. Amount in
Ref. Code Description Qty Unit Rate in Rs. Unit
No: Rs.
B). Application of fertilizers,
insecticides, fungicides (@20
gms/pit/sqmt) etc., once in
month. Based on time motion
study, one man-day is
worked out for 588 Sqmts or
0.17 man-days for 100
Sqmts. Excluding cost of
fertilizers
0.17 nos. 525 Day 89.25
Total rate per 100 Sqmt per
month = (A+B) 464.10
APUGBCL Maintenance of hedge/shrub planting: watering once in 2 days @ 5 Lts/per sqmt
2.2 C shall be provide to maintain sub soil moisture continuously by manually excluding
14 cost of wateri ncluding all operational, incidental ,labour charges for complete of
work..
Unit = 100 Sqmt per month

A). Watering to hedges/

shrubs once in two (2) days
@ 5 litres/per Sqmts (sub soil
moisture shall be maintained
continuously). Based on the
time motion study, one
man-day can watering for
1000 Sqmts per day. For 100
Sqmts = 0.1 man-day.

15 days watering for 100

Sqmts = 15 X 0.1= 1.5 man-
day.
1.5 nos. 525 day 787.50
Total rate per 100 Sqmt per
month 787.50
APUGBCL Maintenance of Palms/Tree planting: Trimming (once in month) and application of
2.3 A fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by
15 manually excluding cost of fertilizers, it including all operational, incidental ,labour
charges, for complete of work

Unit = 100 nos. per month

A). Trimming of Palms/Tree

once in month. Based on the
time motion study, one man-
day is worked out for 91 nos.
For 100 nos it will be 1.1
man-day
1.1 nos. 525 day 577.50

Page 94 of 333
Sl. Amount in
Ref. Code Description Qty Unit Rate in Rs. Unit
No: Rs.
B). Application of fertilizers,
insecticides, fungicides (@20
gms/pit/sqmt) etc., once in
quarterly excluding cost of
fertilizers. Based on time
motion study, one man-day is
worked out for 480 nos . For
100 nos it will be 0.20 man-
days, for month = 0.06 man-
days.

0.06 nos. 525 day 31.50

Total Rate per 100 nos. per
month (A+B)
609.00
APUGBCL Maintenance of Palms/Tree planting: formation of basins 0.30m . away from the
2.3 B edges of plant (once in a month) it including all operational, incidental ,labour charges
16 for complete of work

Unit = 100 nos. per month

A). Formation of basins for

each and every plant upto 1ft.
away from the plant, once in
30 days. Based on the time
motion study, one man-day is
worked out for 48 nos. in a
day. For 100 nos it will be
2.08 man-days.
2.08 nos. 525 day 1092.00
Total Rate per 100 nos. per
month
1092.00

APUGBCL Maintenance of Palms/Tree planting: watering (once in three days @ 5 Lts/per

2.3 C plant shall be provide to maintain sub soil moisture continuously) by manually, but
17 excluding cost of water including all operational, incidental ,labour charges for
complete of work.

Unit = 100 nos. per month

Page 95 of 333
Sl. Amount in
Ref. Code Description Qty Unit Rate in Rs. Unit
No: Rs.
A). Watering and weeding to
Palms/Tree once in a three
days @ 5 litres/per plant (10
watering in a month required
to maintain sub soil moisture
continuously). Based on the
time motion study, one man-
day can be watering for 546
nos per day. For 100 nos =
0.18 man-days. 10 watering
for 100 nos = 10 x 0.18= 1.80
man-days

1.8 nos. 525 day 945.00

Total Rate per 100 nos. per
month 945.00

Guntur- Loading and unloading of plants bag size (13"X13") at site of work and stacking for
Circle -FSR lead less upto 50 m and including labour charges, T&P etc.,and overheads &
18 2022-2023 contractors profit complete for finished item of work (excluding cost of plant bag)
02-06-010

Unit = 100 Nos.

*
Loading / unloading
Transport of plants
rates approved in the Forest 948.84 100 Nos
284.65 284.65
of bag size (13"X13")
Schedule of Rates are inclusive of loading and
unloading. The break-up of the rate will be as
Overheads & Contractors
follows : 70% on transport; 30% 0.13615
on loading and 284.65000 38.76
Profit @13.615%
Rate 100 Nos.
323.41
Guntur- Loading and Unloading of plants bag size (8"X10") at site of work and stacking for
Circle -FSR lead less upto 50 m and including labour charges, T&P etc.,and overheads &
19 2022-2023 contractors profit complete for finished item of work (excluding cost of plant bag)
02-06-010

Unit = 100 Nos.

Loading and unloading of 82.93 100 Nos 82.93

plants of bag size (8"X10")

Overheads & Contractors 0.13615 82.93 11.29

Profit @13.615%
Rate 100 Nos.
94.22

Page 96 of 333
 COMMON SoR 2022-2023
Now approved are exclusive of taxes (i.e., VAT, Excise duty & GST). 15-7-7-22

A.P. Greening & Beautification Corporation

Datas for Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra
Pradesh. ( AMRUT 2.0 )

D A T A ( SOR 2022-23)
1 Red garden soil As per per Cum
Quotation

2 River sand per Cum

As per lead

Vishakhapatn
3 cost & conveyance of dry cow dung powder and FYM as per Vishakhapaam Circle-FSR per Cum
22-23 (Code:
05-35-6)

MA @ 40%
CSSR -22-23
Part- I (LAB-
00120)
4

Mazdoor (Part I - Labour Rates-Common SoR ) per day

CSSR 22-
23_M-
189(a)
5 (MAT-
00332)

Water charges Kilolitter

Clearing unwanted growth (RSSR item no: 2b)
6 RSSR 21-22
item no: 2.b Sqm
Internal Transport of red soil and sand (conveyance charges for
materials by head load . Lead may be considered as per the
7 respective common SoR while finalizing the rate) CSSR 22-23 per Cum
pg.No.39
(A)
Spreading for red soil (RSSR item sl. No:14)
8 RSSR-21-22 per Cum
item sl.
No:14
Rolling (with hand roller/ demesha) (RSSR item sl.no: 15)
RSSR-21-22
9 per Cum
item sl.
No:15
Digging of trenches (the rate will be applicable based on the
classification of soil) (as per bldg.data)
10 per Cum
(BLD-CSTN-
2-1)
 Homogeneous mixing of soil and FYM (FSR item sl.no: -01-02-006) Gunter-
Circl FSR 22-
11 23 item per Cum
sl.no: -01-
02-006
12
Internal Transportation of bag plants to the planting points
Gunter-
13 FSR; 2-2-16 Circl FSR- each
1 4''X7''
22-23 ; 02-
Gunter-
02-016
14 Circl FSR- each
FSR; 2-2-17 2 5''X9''
22-23 ; 02-
Gunter-
02-017
Circl FSR-
15 22-23 ; 02-
02-018
FSR; 2-2-18 3 6''X12'' each
Gunter-
Circl FSR-
16 22-23 ; 02-
FSR; 2-2-19 4 8''X10'' 02-019 each
RSSR-21-22
17 item sl.
RSSR20.D.ii Internal transportation of tall plants No:18.d.ii each

18
Planting [RSSR 20 e (i)]

RSSR-21-22
19 item sl. each
1 0.3*0.3*0.3 No:18.e.i

RSSR-21-22
20 item sl. each
2 0.45*0.45*0.45 No:18.e.ii

RSSR-21-22
21 item sl. each
3 0.6*0.6*0.6 No:18.e.iii

RSSR-21-22
22 item sl. each
4 0.75*0.75*0.75 No:18.e. iii

RSSR-21-22
23 item sl. each
5 0.9*0.9*0.9 No:18.e.iv

RSSR-21-22
24 item sl. each
6 1*1*1 No:18.e.v
Overheads & Contractors Profit @13.615%

*Transport rates approved in the Forest Schedule of Rates are inclusive of loading
and unloading. The break-up of the rate will be as follows : 70% on transport; 30%
on loading and unloading. (8"X10") bag plants
Guntur- proporti
Sl No. Circle -FSR
Bag size 100 nos volum 2022-2023 onateRS
./-
Guntur-
Circle - 1
FSR 2022-
8" x 12" 0.3822 331.70
2023 02-
06-010

2 13" x 13" 1.0933 948.84

3 8" x 10" 0.3185 276.42

4 7" x 8" 0.1951 169.32

Guntur-
Circle - 5 (4"X7") 57.95
FSR 2022-
2023 02-
06-07
6
7
Internal Transportation of bag plants to the planting points

1 8" x 12" 0.3822 183.57

2 8" x 10" 0.3185 152.98

-22

atnam District Andhra

900.00

1024.00

1757.54

0.40

525.00

125.00

7.670

75.000

29.710

46.280

191.1
49.08

0.5

0.77

1.19

1.53

2.38

1.42

4.47

9.12

11.40

13.67

15.25
 0.13615

e inclusive of loading
% on transport; 30%

Unite

100 nos

100 nos

100 nos

100 nos

100 nos

ting points

100 nos

100 nos
 CIVIL DATA : Page-103

A.P. Greening & Beautification Corporation

D A T A ( SOR 2022-23)
Datas for Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District
Andhra Pradesh. ( AMRUT 2.0 )

S.No./ Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code No.

1 MAT- Clearing the light Jungle like Shrub, bushes, grass, wild vegetation and it including all operational, incidental,
00480 labour charges, required tools, overheads & contractors profit complete for finished item of work

CSSR-22-23, part -II Pg.no 21 Item No. 110

Unit : 1 sqm
Clearing light Jungle 1.00 2.80 2.80
Overheads & Contractors Profit 0.13615 2.80 0.38
@13.615%
Rate per 1 Sqm 3.18

2 Alignment and fixing of planting point with 0.45 mtrs. length sticks including material cost, transport and
overheads & contractors profit complete for finished item of work.

RSSR 20-21 Item No. 18-I-b

Unit : 1 No.
Taking output : 100.00 Nos.
a) Labour
Rate as per RSSR 21-22 Item No. 18-I-b 100.00 Nos. 114.72 100 Nos. 114.72

MA @ 40% 0.40 114.72 45.89

160.61
Overheads & Contractors Profit 0.13615 160.61 21.87
@13.615%
Rate per 100 Nos. 182.47
Rate per 1 plant 1.82

3 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in
ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,
incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

(BLD-CSTN-2-1)
Ordinary Soil - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 3.64 Nos. 525.00 1 No. 1911.00
MA @ 40% 0.40 1911.00 764.40
Total-a 2675.40
S.No. 2-B- Add extra 25% for pits 0.25 2675.40 668.85
1
Overheads & Contractors Profit 0.13615 3344.25 455.32
@13.615%
Cost for 10 cum 3799.57
Rate per cum 379.96
 CIVIL DATA : Page-104

S.No./ Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code No.

4 Filling with red soil in in pits/trenches with initial lead in layers not exceeding 15cm thick, watering and
ramming including cost and conveyance of water to work site and all operational, incidental, labour charges,
hire charges of T&P etc., and overheads & contractors profit complete for finished item of work(APSS
NO.309&310)
(BLD-CSTN-2-8) & Proc.No.20938 (R&B)/ Dt:14-5-2019
Unit : 1 cum
Taking output 6.00 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No. 162.75
MA @ 40% 0.40 162.75 65.10
b)Material :
Cost of red soil 6.00 cum 900.00 1 cum 5400.00
water charges @ 1% 0.01 5627.85 56.28
5684.13
Overheads & Contractors Profit 0.13615 5684.13 773.89
@13.615%
Rate per 6 cum 6458.02
Rate per 1 cum 1076.34

5 As per Filling with Red soil (Red soil in this context it is defined as sandy loamy garden soil congenial for plant
Quotation growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral) in
pits/trenches and including cost and conveyance of red soil to work site and it including all operational,
incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work.

Unit : 1 cum
As per Quotation 1.00 Cum 900.00 1 cum 900.00
Rate per 1 cum 900.00

6 Cost and Conveyance of Farm Yard Manure or dry cow dung powder including loading, unloading, internal
transport and application of the FYM into the pits/trenches and it including all operational, incidental, labour
Vishakhapa charges, required tools, overheads & contractors profit complete for finished item of work. (0.028 cum Farm
tnam yard Manure for each pit.)
Circle-FSR
22-23
(Code: 05- cost & conveyance of dry cow dung powder and FYM as per
35-6) Vishakhapatnam Circle-FSR 22-23 (Code: 05-35-6)

Unit : 1 cum
As per FSR 1.00 Cum 1757.54 1 Cum 1757.54
Overheads & Contractors Profit 0.13615 1757.54 239.29
@13.615%
Rate per 1 cum 1996.83

7 Conveyance charges for internal transprot upto 100 mt with head load and application of the red soil and FYM
into the pit and it including all operational, incidental ,labour charges, required tools, overheads &
contractors profit complete for finished item of work.

CSSR 22-23, Item No. Table A(2), Page No.39

Unit : 1 cum
As per CSSR 1.00 Cum 75.00 1 cum 75.00
MA @ 40% 0.40 75.00 30.00
Overheads & Contractors Profit 0.13615 105.00 14.30
@13.615%
 CIVIL DATA : Page-105

S.No./ Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code No.

Rate per 1 cum 119.30

8 Internal transportation of tall plants from plants stacking place to planting pit, it including all operational,
incidental ,labour charges, overheads & contractors profit complete for finished item of work.
RSSR 21-22, Item No.18-d-ii
Unit : 1 No.s
As per RSSR 100.00 No. 237.58 100 Nos. 237.58
MA @ 40% 0.40 237.58 95.03
Overheads & Contractors Profit 0.13615 332.61 45.29
@13.615%
Rate per 100 Nos. 377.90
Rate per 1 plant 3.78

9 Removing polythene bag, planting by keeping the ball of earth intact, fixing the plant by refilling with dug out
of soil /supplied soli FYM mixer and ramming around the plant , it including all operational,
incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work.

RSSR 21-22, Item No.18-e-iii+iv

Unit : 1 No.
As per RSSR 1.00 No. 11.40 1 No. 11.40
MA @ 40% 0.40 11.40 4.56
Overheads & Contractors Profit 0.13615 15.96 2.17
@13.615%
Rate per 1 No 18.13

10 Circular weeding cum deep soil working to a dia of 1 m and to a depth of 10 cm around the plant and it
including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete
for finished item of work

RSSR 21-22, Item No.18-I-a

Unit : 1 No.
As per RSSR 1.00 No. 15.25 1 No. 15.25
MA @ 40% 0.40 15.25 6.10
Overheads & Contractors Profit 0.13615 21.35 2.91
@13.615%
Rate per 1 No 24.26

11 Cost of bamboo stakes of 2.00 mt height including transport at the planting plants for avenue plantation
including overheads & contractors profit complete for finished item of work.

As per Quotation
Unit : 1 No.
As per Quotation 1.00 No. 25.00 1 No. 25.00
Rate per 1 No 25.00

12 Watch and ward including watering, pruning, cleaning the area and application of fertilizers and chemicals as
directed by site in-charge .
As per G.O 224 MA&UD dt:13.10.2015
Unit : per Month
As per G.O 224 MA&UD 1.00 Month 12000.00 1 Month 12000.00
dt:13.10.2015
Rate per Month 12000.00
 CIVIL DATA : Page-106

S.No./ Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code No.

13 Hire charges of tractor mounted water tanker for filling sump by 5000 ltrs capacity tanker (120 waterings for
one year ie. once in a three days @ 5 litres per sqm/plant per each time) and it including all operational,
incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work

RSSR 21-22 Item No. 26

Unit : 1 trip
As per RSSR 1.00 Trip 608.36 1 Trip 608.36
Overheads & Contractors Profit 0.13615 608.36 82.83
@13.615%
Rate per 1 trip (5000 ltrs capacity 691.19
tanker)

14 Watering to the plants from the near by source i.e., bore well, open well or kunta and it including all
operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished
item of work
RSSR 21-22, Item No.25
Unit : 1 No.
As per RSSR 1.00 No. 6.79 1 No. 6.79
MA @ 40% 0.40 6.79 2.72
Overheads & Contractors Profit 0.13615 9.51 1.29
@13.615%
Rate per 1 No 10.80
15 Watering by pipe, weeding and soil working 1 Mt Dai around the plant, fertilizer application, pesticide
application and watch and ward. and it including, labour charges, required tools, overheads & contractors
profit complete for finished item of work

Vishakhapatnam Circle-FSR 22-23 (Code: 05-42-11)

Unit : 1 No.
As per FSR 1000.00 No. 7957.88 1000 No. 7957.88
MA @ 40% 0.40 7957.88 3183.15
Overheads & Contractors Profit 0.13615 11141.03 1516.85
@13.615%
Rate per 1000 Nos/per 12657.88
month
16 As per Supply, deliveryand and fixing of HDPE Tree Guards confirming to ISI standards with following Technical
Quotation specifications
1. The tree guard should be made of Virgin HDPE
2. Width – 1200 mm
3. Height – 1800 mm
4. Diameter – 375 mm
5. Horizontal regular filament average thickness should not be less than 4 mm.
6. Vertical regular filament average thickness should not be less than 4 mm.
7. All joints average thicknesses should not be less than 6 mm
8. Regular mesh gap should not be more than 45mm x 55mm..
9. Longitudinal additional extra thick filament (two bars) shall be placed at 4 places along the height of
1800mm with a filament average thickness should not be less than 5 mm.
10. Circumference additional extra thick filament (two bars) shall be placed at 5 places along the width of
1200mm with a filament average thickness should not be less than 5 mm.
 CIVIL DATA : Page-107

S.No./ Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code No.

11. Weight of the sheet (1200mmX1800mm) should not be less than 1.50 kgs excluding display board and
cable ties.
12. Melt Flow Index (MFI) should be as per Raw Material data sheet submitted by the contractor. (+ 20%
allowable)
13. Supply of 18 Nos cable ties (100 mm length).
14. Color – Dark blue or Green variants
15. Suitable for outdoor use (Must be tested for presence of UV resistance material)
16. Display board of size 300mm x 150mm of plastic glow sheet blend of HDPP / tin plate/ACP with a
suitable hole at each corner for tie up.
The rates inclusive of loading, transportation to the site, unloading. complete for finished item of work.

As per Quotation
Unit : 1 No.
HDPE Tree Guards 1.00 No. 254.30 1 No. 254.30
Rate per each 254.30
17 MAD Painting With Asian Apex exterior emulsion paint two coats over two coats of primary coat of Asian exterior
CIRCULAR emulsion paint and painting of clip art / vector art /3D bubble art with enamel paint over old plastered walls of
Roc. Public/Govt. Institution’s compound walls, Medians and Islands including cost and conveyance of all
No.148Y20 materials and labor charges etc…complete including removing of posters and rubbing work for walls up to 10
15/M3 feet height. overheads & contractors profit complete for finished item of work. as per (ANNEXURE TO THE
CIRCULAR ROC NO. 1481/2017/M3, Dt. 13.06.2017)

ANNEXURE TO THE CIRCULAR ROC NO. 1481/2017/M3, Dt. 13.06.2017 (3)

Unit : 1 sqm
Painting for Medians and Islands per Sft 1 Sft. 25.00

Painting for Medians and Islands per 1 Sqm 269.10

Sqm
Overheads & Contractors Profit 269.10 36.64
@13.615% 0.13615
Rate per 1 Sqm 305.74
18 RBR- Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees
STCL-2 of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and
stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal
of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD /
MORTH. By Mechanical Means

In area of non-thorny jungle (light

jungle)Taking output : 10000 Sqm
Unit = 1.00 Sqm
A) Machinery
Dozer D 50 with attachment or suitable 10.00 Hours 1907.00 1 Hour 19070.00
machinery for removal of trees &
stumps

Tractor 1.00 Hours 521.00 1 Hour 521.00

B) LABOUR
Mazdoor (unskilled) 4.16 Day 525.00 1 Day 2184.00
MA @ 40% 0.40 2184.00 873.60
22648.60
Overheads & Contractors Profit 0.13615 22648.60 3083.61
@13.615%
Rate per 1 Sqm = (a+b)/10000 2.57
 A.P. GREENING & BEAUTIFICATION CORPORATION

Line Estimate for development and beautification works at Eco park (183.0
acres), Idupulapaya, Kadapa dt. Andhra Pradesh.
Estimate Cost: Rs.1,871.42 Lakhs
Amount
S.No Description of Item (in Rs.)
HARDSCAPE (Civil woks)
1 CC Kerb - 5000m 5,000,000.00
2 Construction of seating wall at crafts village& adventure 380,000.00
zone- 50m
3 stone edging for softscape works- 500m 40,000.00

4 Flooring with CC pavers near park zones& floral garden- 4,000,000.00

4000 sqm
Granite flooring at entrance plaza, amphitheatre,
5 camping area & gazebos- 3000 sqm 12,900,000.00

6 Planter boxes- 25 nos 874,200.00

7 Construction of WBM road 3.5 km and 6.0 m width 3,850,000.00
8 Construction of OAT- 1500 sqm (350 members) 3,000,000.00
9 Granite benches- 30 nos 495,000.00

10 Children play& Fitness equipment including civil works 2,381,725.00

at family zone
11 Vendor shops at entrance- 5m x3m (6 nos) 3,900,000.00
12 Cottages at camping area- 6m x6m (10 nos) 16,000,000.00
13 Toilet block- 7m x 5m (3 no) 1,800,000.00
14 Craft village shops - 3m x 3m (15nos) 3,000,000.00
15 Bamboo treated Gazebo- 6m dia (3 nos) 3,900,000.00
16 construction of cafeteria - 14mx10m (1no) 6,100,000.00
17 Tree deck- 3mx 3m (5nos) 1,500,000.00

18 Construction of interpretation center at entrance- 45m x 23,220,000.00

12m
19 Percolation pits- 3 nos 100,000.00
20 Gabion structure- 2 nos 400,000.00
21 Loose boulder structure- 25 nos 625,000.00
22 Countour bunding - 800 m 160,000.00
23 Construction of Watch tower 3.0 x 3.0 m it including cos 6,000,000.00
24 Provision for soap football 500,000.00
25 Provision for Board walk- 600m length& 1.5m wide 12,000,000.00
26 Provision for Zip line- 100m 700,000.00
27 Provision for Cable cycling- 100m 1,000,000.00
28 Provision for nature play- 10 nos 500,000.00

29 Provision for renovation /repair works to existing road 1,000,000.00

including construction of CD works
30 Provision for illumination works 8,673,315.00
31 Provision for Irrigation facilities 8,673,315.00
Sub Total - I (Hardscape works) 132,672,555.00
Softscape (Development & Maintenance)
32 Topiary trees- 10,000 nos 8,674,000.00
33 Shrub planting/ Hedge- 15000 sqm 22,245,000.00
34 Lawn area - 5000 sqm 2,172,000.00
Sub Total - II (Softscape works) 33,091,000.00
Total: I + II 165,763,555.00
Add GST @ 12% on TOTAL : I + II 19,891,627.00
Add seigniorage charges @ 0.6% on TOTAL : I + II 994,581.00
Add unforeseen items 491,859.00
Grand Total 187,141,622.00
Rupees eighteen hundred and seventy five lakhs only
 A.P. Greening & Beautification Corporation

Name of the work: Estimate for Burial Ground Entrance Arch

Estimate Cost: Rs.2.15 Lakhs
Sl.
SoR Description of Item Nos L B D Qty Unit Rate in Rs Unit Amount
No
Entrance Arch
1 (BLD- Earth work excavation for foundations (Manual Means) of
CSTN- buildings, septic tank, sump, compound wall in ordinary
2-1) soils and depositing on bank with an initial lead of 10m
and depth up to 3m including all operational, incidental,
labour charges such as shoring, sheeting, planking,
strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges
etc., as per SS 20 B(APSS 308)

For Footings 1 x 2 1.50 1.50 1.80 8.10

8.10 Cum 303.97 Cum 2,462.16
2 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate:
CSTN- Coarse aggregate) for foundations and under flooring bed
3-5) using 162.0 kgs of cement, coarse aggregate 40mm size
hard , machine crushed granite from approved quarry
including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc., to site, and
including all charges for machine mixing, laying concrete
in foundations and under flooring bed, ramming in 15 cm
layers finishing top surface to the required level curing
etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

For Footings 1 x 2 1.5 1.5 0.10 0.45

For Plinth Beam 1 x 1 5.50 0.40 0.10 0.22
0.67 Cum 5,374.83 Cum 3,601.14
3 (BLD- Supply and placing of the V.R.C.C Nominal Mix
CSTN- Concrete M 20 grade corresponding to IS 456 with
3-13- minimum cement content of 350 kgs per 1 cum of
A) concrete using CONCRETE MIXER with 20mm size
HBG graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part
8) from approved quarry and including cost and
conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water, etc., to site and , centring
using Steel scaffolding pipes , jack props , Waller’s , Foot
plates , brackets , steel centring plates etc., including all
operational, incidental and labour charges such as
machine mixing, laying concrete, vibrator, curing etc., and
overheads & contractors profit complete but excluding
cost of steel and its fabrication charges for finished item
of work (APSS No. 402)

For Footings 1 x 2 1.2 1.2 0.30 0.86

0.86 Cum 10,619.61 Cum 9,132.86
For Pedestals 1 x 2 0.75 0.75 0.90 1.01
1.01 Cum 11,298.80 Cum 11,411.79
For Plinth Beam 1 x 1 5.50 0.40 0.40 0.88
0.88 Cum 13,436.35 Cum 11,823.99
4 (BLD- Supply and placing of the V.R.C.C Nominal Mix
CSTN- Concrete M 20 grade corresponding to IS 456 with
3-13- minimum cement content of 350 kgs per 1 cum of
B) concrete using CONCRETE MIXER with 20mm size
HBG graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part
8) from approved quarry and,including cost and
conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and , centring
using Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc., including all
operational, incidental and labour charges such as
machine mixing, lifting of concrete manually, laying
concrete, vibrator, curing , overheads & contractors profit
etc., complete but excluding cost of steel and its
fabrication charges for finished item of work (APSS No.
402)

For Columns 1 x 1 0.40 0.40 5.00 0.80

 For Columns 1 x 1 0.40 0.40 2.30 0.37
1.17 Cum 13,330.45 Cum 15,596.63
5 (BLD- Supply and placing of the V.R.C.C Nominal Mix
CSTN- Concrete M 20 grade corresponding to IS 456 with
3-13- minimum cement content of 350 kgs per 1 cum of
C) concrete using CONCRETE MIXER with 20mm size
HBG graded machine crushed hard granite metal (coarse
aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part
8) from approved quarry including cost and conveyance
of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and , centring using
Casurina Ballies , Bamboos , Wooden Reapers , Runners ,
Wood Posts , Wall Plates etc., including all operational,
incidental and labour charges such as machine mixing,
lifting of concrete manually, laying concrete, vibrator, ,
curing , overheads & contractors profit etc., complete but
excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)

For Beam 1 x 1 5.50 0.40 0.30 0.66

0.66 Cum 11,452.05 Cum 7,558.35
6 (BLD- Providing High Yield Strength Deformed (HYSD) /
CSTN- Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500D
4.2)& grade as per IS 1786-1979) of different diameters for
Amend RCC works , including labour charges for straightening,
ment in cutting, bending to required sizes and shapes, placing in
SoR position with cover blocks of approved materials and size
2011- and tying and lap-splicing with binding wire of 18 SWG,
12 forming grills for reinforcement work as per approved
page designs and drawings, including cost and conveyance of
No. steel bars, including all wastages such as overlaps,
392 couplings, chairs, spacer bars including cost and
conveyance of binding wire, cover blocks and all
incidental, operational, labour charges such as cutting,
bending, placing in position, tying including overheads &
contractors profit complete for finished item of work.
( APSS No.126)

For Footings 1 x 1 0.860 70.00 Kg/Cum 60.20

For Pedestals 1 x 1 1.010 70.00 Kg/Cum 70.70
For Plinth Beam 1 x 1 0.880 100.00 Kg/Cum 88.00
For Columns 1 x 1 1.170 100.00 Kg/Cum 117.00
For Beam 1 x 1 0.660 100.00 Kg/Cum 66.00
401.90 Kgs 95.91 Kgs 38,546.23
7 (BLD- Plastering 12mm thick single coat in CM(1:5) using
CSTN- screened sand including cost and conveyance of all
8-3 materials like cement, sand, water etc., to site and all
Amend operational, incidental charges on materials and including
ment in cost of all labour charges for mixing mortar, finishing,
SoR curing as directed by Engineer-in-charge etc., and
2016- overheads & contractors profit complete for finished item
17 ) of work.(SS 901,903 & 904)

For beam 1 x 1 5.50 1.40 7.70

7.70 Sqm 454.48 Sqm 3,499.50
8 (As Providing and applying PMCC / Deco orient base or
per Equivalent exterior Texture ( borders and design as per
Amend the pattern approved by the Engineer-in-Charge ) of
ment in average 2 to 3 mm thickness over plastered surface to
SoR prepare the surface even and smooth after thoroughly
2011- brushing the surface to remove all dirt and remains of
12) loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying putty/
texture paint filler by putty knife / muslin pad, air dry for
2 - 3 hrs for the surface preparation including cost and
conveyance of all materials to work site and all
operational, incidental, labour charges, scaffolding
charges, overheads and contractors profit etc., complete
for finished item of work in all floors for external walls

For beam 1 x 1 5.5 1.4 7.70

7.70 Sqm 475.22 Sqm 3,659.19
9 Providing cladding to wall with High Polished Granite 16
to 18 mm thick up to 8'-00 (2.43 M) other than black and
regular colours, length equal to flooring slabs set over
base coat of CM(1:5) 12 mm thick using screened sand
(BLD- with cement slurry of honey like consistency spread at the
CSTN- rate of 3.30 kgs per sqm and jointing with white cement
9-7) paste mixed with pigment of matching shade to full depth,
including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete
for finished item of work.

For Columns 1 x 4 0.4 4.50 7.20

For Columns 1 x 4 0.4 2.00 3.20
10.40 Sqm 4,195.54 Sqm 43,633.62
10 (BLD- Supply & application of one coat water based cement
CSTN- primer of exterior grade II and two coats of acrylic
12-2& exterior emulsion paint having VOC (Volatile Organic
Amend Compound) content less than 50 grams/litre for exterior
ment in walls including cost and conveyance of all materials to
SoR site,and all operational, incidental, labour charges etc.,
2011- and overheads & contractors profit complete for finished
12) item of work in all floors.

For beam 1 x 1 5.5 1.4 7.70

7.70 Sqm 305.26 Sqm 2,350.50

11 As per Supply and fabrication of MS framed structure like
Data Window Grills, Compound Wall Grills, Iron Doors,
Windows, Gates, MS Frame for chain link mesh works,
Roof Trusses by using square / rectangular MS hollow
section as per IS 4923 & Angles as per SP:6(1) IS Hand
book, including cost of welding rods, power charges,
labour charges for cutting, placing, welding and erecting
in position and fixing, cost & convenience of all materials
including wastage to site and complete for finished item
of
Forwork
M.S column Size of 1 x 2 2.5 5.00 Rmt
150 x 150 x 5 mm thick
MS hollow section
@ 22.26 kg per meter 22.26 5.00 111.30 Kgs
For M.S Gate 4.0 m x 2.0 m height
For sliding gate frame of 1 x 1 10 10.00 Rmt
Size 100x50x4 mm thick
MS hollow section
For Openable gate frame 1 x 1 6 6.00 Rmt
of Size 100x50x4 mm
thick MS hollow section

@ 8.59 kg per meter 8.59 16.00 137.44 Kgs

For inner frame of sliding 1 x 1 9.2 9.20 Rmt

gate by size 50x50x3.6
mm thick MS hollow
section
For inner frame of 1 x 1 5.3 5.30 Rmt
Openable gate by size
50x50x3.6 mm thick MS
hollow section

For inclined support of 1 x 1 2.60 2.60 Rmt

size 50x50x3.6 mm thick
MS hollow section
@ 4.98 kg per meter 4.98 17.10 85.16 Kgs

For verticals in sliding 1 x 1 14.41 14.41 Rmt

gate of size of size
25x25x2.6 mm thick MS
hollow section
For verticals in Openable 1 x 1 5.4 5.40 Rmt
gate of size of size
25x25x2.6 mm thick MS
hollow section
For Horizontals in sliding 1 x 1 6.83 6.83 Rmt
gate of size 25x25x2.6
mm thick MS hollow
section
@ 1.69 kg per meter 1.69 26.64 45.02 Kgs
 MS Angle of size 1 x 1 14.4 14.40 Rmt
25x25x5mm for angle
track
@ 1.8 kg per meter 1.8 14.40 25.92 Kgs
16mm Rebar for 1 x 24 0.3 7.20 Rmt
anchoring
@ 1.6 kg per meter 1.6 7.20 11.52 Kgs
For guide rollers & V 1 x 20 20.00 Nos
groove wheel
@ 2. kg per each 2 32.00 64.00 Kgs
@ 1.69kg per meter 1.69 26.64 45.02 Kgs
461.38 Kgs 127.14 Kgs 58,659.85
12 (BLD- Painting to new iron work with one coat of Red oxide
CSTN- primer and two coats with synthetic enamel paint Grade-I
12-7 & VOC (Volatile Organic Compound) content less than 50
12-12- grams/litre over primer coat of red oxid, including cost
197) and conveyance of all materials like Red oxide primer,
Synthetic Enamel Paint to site, incidental, operational and
all labour charges etc., and overheads & contractors profit
complete for finished
For M.S column item of
Size of 1 work
x 2 in 2.5
all floors.
0.6 (SS No. 3.00
150 x 150 x 5 mm thick
MS hollow section
For M.S Gate 4.0 m x 2.0 m height
For sliding gate frame of 1 x 1 10 0.3 3.00
Size 100x50x4 mm thick
MS hollow section
For Openable gate frame 1 x 1 6 0.3 1.80
of Size 100x50x4 mm
thick MS hollow section

For inner frame of sliding 1 x 1 9.2 0.2 1.84

gate by size 50x50x3.6
mm thick MS hollow
section
For inner frame of 1 x 1 5.3 0.2 1.06
Openable gate by size
50x50x3.6 mm thick MS
hollow section

For inclined support of 1 x 1 2.60 0.2 0.52

size 50x50x3.6 mm thick
MS hollow section
For verticals in sliding 1 x 1 14.41 0.1 1.44
gate of size of size
25x25x2.6 mm thick MS
hollow section
For verticals in Openable 1 x 1 5.4 0.1 0.54
gate of size of size
25x25x2.6 mm thick MS
hollow section
For Horizontals in sliding 1 x 1 6.83 0.1 0.68
gate of size 25x25x2.6
mm thick MS hollow
section
13.88 Sqm 221.26 Sqm 3,071.09

Unforseen Items
Total 215,006.9
 A.P. Greening & Beautification Corporation

For Construction of see through compound wall

Estimate Cost: Rs.57.80 Lakhs

Sl.
SoR Description of Item Nos L B D Qty Unit Rate in Rs Unit Amount
No
For Construction of see through compound wall -490.0
Rmt
1 (BLD- Earth work excavation for foundations (Manual Means) of
CSTN- buildings, septic tank, sump, compound wall in ordinary soils
2-1) and depositing on bank with an initial lead of 10m and depth
up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and
overheads & contractors profit complete for finished item of
work excluding dewatering charges etc., as per SS 20 B(APSS
308)

For Footings 1 x 98 1.50 1.50 1.50 330.75

For Basement wall 1 x 1 320.00 0.60 0.60 115.20
445.95 Cum 303.97 Cum 135,555.42
2 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate:
CSTN- Coarse aggregate) for foundations and under flooring bed
3-5) using 162.0 kgs of cement, coarse aggregate 40mm size hard
, machine crushed granite from approved quarry including
cost and conveyance of all materials like cement, sand, coarse
aggregate, water etc., to site, and including all charges for
machine mixing, laying concrete in foundations and under
flooring bed, ramming in 15 cm layers finishing top surface to
the required level curing etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 402)

For Footings 1 x 98 1.50 1.50 0.10 22.05

For Basement wall 1 x 1 320.00 0.60 0.10 19.20
41.25 Cum 5,374.83 Cum 221,711.74
3 Random Rubble stone masonry in CM (1:8) prop: (Cement:
Screened sand) using hard granite stones carted from
approved quarry including cost and conveyance of all materials
like cement, screened sand, water,Rough stone Through
stone, Coursed stones etc., from approved quarry, to site,
(BLD- including labour charges for cutting stones to required size and
CSTN- shape, mixing, of cement, mortar, construction, curing,
6-13) charges for scaffolding etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 601 & 615)

For Basement wall 1 x 1 320.00 0.45 0.60 86.40

Deductions
Columns -1 x 98 0.30 0.3 0.6 -5.29
81.11 Cum 5,284.02 Cum 428,586.86
4 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete M 20
CSTN- grade corresponding to IS 456 with minimum cement content
3-13-A) of 350 kgs per 1 cum of concrete using CONCRETE MIXER
with 20mm size HBG graded machine crushed hard granite
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
Part 1 to Part 8) from approved quarry and including cost and
conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water, etc., to site and , centring using Steel
scaffolding pipes , jack props , Waller’s , Foot plates ,
brackets , steel centring plates etc., including all operational,
incidental and labour charges such as machine mixing, laying
concrete, vibrator, curing etc., and overheads & contractors
profit complete but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402)

For Footings 1 x 98 1.20 1.20 0.30 42.34

42.34 Cum 10,619.61 Cum 449,634.29
For Pedestals 1 x 98 0.60 0.60 0.80 28.22
28.22 Cum 11,298.80 Cum 318,852.14
 For Plinth Beam above 1 x 1 320.00 0.23 0.30 22.08
the basement wall

22.08 Cum 13,436.35 Cum 296,674.61

5 (BLD- Providing High Yield Strength Deformed (HYSD) / Thermo
CSTN- Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per
4.2)& IS 1786-1979) of different diameters for RCC works , including
Amend labour charges for straightening, cutting, bending to required
ment in sizes and shapes, placing in position with cover blocks of
SoR approved materials and size and tying and lap-splicing with
2011- binding wire of 18 SWG, forming grills for reinforcement work
12 as per approved designs and drawings, including cost and
page conveyance of steel bars, including all wastages such as
No. overlaps, couplings, chairs, spacer bars including cost and
392 conveyance of binding wire, cover blocks and all incidental,
operational, labour charges such as cutting, bending, placing
in position, tying including overheads & contractors profit
complete for finished item of work.( APSS No.126)

For Footings 1 x 1 42.3 70 kg/m3 2963.80

For Pedestals 1 x 1 28.2 70 kg/m3 1975.40
For Plinth Beam above 2208.00
the basement wall 1 x 1 22 100 kg/m3

7147.20 Kgs 95.91 Kgs 685,487.95

6 (BLD- Masonry work in CM(1:6) prop (Cement : Screened sand) in
CSTN- superstructure with fly ash cement / lime solid blocks of size
5-17) 290mm x 225mm x 140mm from approved source having
minimum crushing strength of 50 Kg/Sqcm. including cost and
conveyance of all materials like cement, sand, bricks, water
etc., to site,and such as labour charges, like mixing cement
mortar, scaffolding charges, constructing masonry, lift charges,
curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).

For Brick Masonry wall 1 x 1 320.00 0.3 0.50 48.00

For Brick Masonry 1 x 98.00 0.30 0.3 1.30 11.47

pedestal above the
basement wall @ 5 m
c/c
59.47 Cum 8,392.32 Cum 499,091.27
7 As per Supply and fabrication of MS framed structure like
Data Window Grills, Compound Wall Grills, Iron Doors,
Windows, Gates, MS Frame for chain link mesh works,
Roof Trusses by using square / rectangular MS hollow
section as per IS 4923 & Angles as per SP:6(1) IS Hand
book, including cost of welding rods, power charges,
labour charges for cutting, placing, welding and erecting in
position and fixing, cost & convenience of all materials
including wastage to site and complete for finished item of
Compound Wall Grill 4.50 m x 1.30 m
For vertical support
using MS hollow
section 70 x 30 x 3.2
98 x 7 1.50 1029.00 Rmt
mm thick @ 4.50
Kg/Rmt

For Horizontal
support using MS
hollow section 70 x
98 x 2 4.80 940.80 Rmt
30 x 3.2 mm thick @
4.50 Kg/Rmt

@ 4.5 kg per meter 4.5 1969.80 8864.10 Kgs

Total kgs 8864.10 Kgs 127.14 Kgs 1,126,981.67
8 As per Supply and fabrication of MS framed structure like
Data Window Grills, Compound Wall Grills, Iron Doors,
Windows, Gates, MS Frame for chain link mesh
works ,Roof Trusses by using MS Flats as per SP:6(1) IS
Hand book , including cost of welding rods, power
charges, labour charges for cutting, placing, welding and
erecting in position and fixing, cost & convenience of all
materials to site and complete for finished item of work
For Horizontal
support using MS flat
of 40 x 5 mm thick @ 98 x 1 4.80 470.40 Rmt
1.6 Kg/Rmt

For internal supports

as per design using
MS flat of 40 x 5 mm
98 x 32 1.22 3825.92 Rmt
thick @ 1.6 Kg/Rmt

@ 1.6 kg per meter 1 4296.32 4296.32 Kgs 127.14 Kgs 546,234.12

9 As per Supply and fabrication works like Window Grills,

Data Compound Wall Grills, Iron Doors, Windows, Gates, Roof
Trusses by using MS solid plate section as per IS 1730
including cost of welding rods, power charges, labour
charges for cutting, placing, welding & erecting in position
and fixing cost & convenience of all materials including
wastage to site and complete for finished item of work.
MS plate of
120x120x5mm thick
@ 39.20 Kg/Sqmt as 98 x 1 0.125 0.125 1.53
per design

@39.20 kg per Sqm

39.2 1.53 59.98 Kgs 138.78 Kgs 8,324.02

10 (BLD- Painting to new iron work with one coat of Red oxide
CSTN- primer and two coats with synthetic enamel paint Grade-I
12-7 &
VOC (Volatile Organic Compound) content less than 50
12-12-
197) grams/litre over primer coat of red oxid, including cost and
conveyance of all materials like Red oxide primer,
Synthetic Enamel Paint to site, incidental, operational and
all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No.
1201, 1212 &
For vertical 1207).
support
using MS hollow
section 70 x 30 x 3.2
mm thick @ 4.50 98 x 7 1.5 0.20 205.80
Kg/Rmt

For Horizontal
support using MS
hollow section 70 x
30 x 3.2 mm thick @ 98 x 2 4.8 0.20 0.00
4.50 Kg/Rmt

For Horizontal
support using MS flat 98 x 1 4.8 0.09 0.00
of 40 x 5 mm thick @
1.6 Kg/Rmt
For internal supports
as per design using 98 x 32 1.22 0.09 0.00
MS flat of 40 x 5 mm
thick @ 1.6 Kg/Rmt
MS plate of
120x120x5mm thick 98 x 1 0.125 0.125 0.00
@ 39.20 Kg/Sqmt as
per design
782.16 Sqm 221.26 Sqm 173,060.72
11 (BLD- Vibrated Plain Cement Concrete M 20 Nominal mix using
CSTN- Concrete MIXER, 20mm size hard granite machine crushed
3-13- graded metal (coarse aggregate - as per IS 383 - 1970 and IS
C) 2386 Part 1 to Part 8) from approved quarry, using a minimum
quantity of 350 kgs. of cement per 1 cum of concrete ,
including cost and conveyance of all materials like cement,
fine aggregate (Sand), coarse aggregate, water etc., to site
including steel centring, shuttering, machine mixing, lift
charges, laying concrete, vibrating, curing, overheads &
contractors profit etc., complete for finished item of work
(APSS No. 402 & 403)

For fixing MS grills in 1 x 98 4.5 0.3 0.1 13.23

bewteen pedestals
above the basement
wall.
13.23 Cum 7,953.39 Cum 105,223.41
12 ( BLD- Plastering 12mm thick in two coats using screened sand with
CSTN- base coat of 8mm thick in CM (1:6) and top coat of 4mm thick
8-10) in CM (1:4) with dubara sponge finishing including cost and
conveyance of all materials like cement, sand, water etc., to
site, ,, and all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar, finishing,
scaffolding, lift charges, curing, including cutting grooves as
directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS
901,903 & 904)

For Brick Masonry wall 1 x 2 320.00 0.65 416.00

For Brick Masonry 4 x 98 0.3 1.3 152.88

pedestal above the
basement wall @ 5 m
c/c
568.88 Sqm 598.04 Sqm 340,215.33
1 (BLD- Providing and applying PMCC / Deco orient base or Equivalent
CSTN- exterior Texture ( borders and design as per the pattern
12-2& approved by the Engineer-in-Charge ) of average 2 to 3 mm
Amend thickness over plastered surface to prepare the surface even
ment in and smooth after thoroughly brushing the surface to remove all
SoR dirt and remains of loose powdered materials, applying emery
2011- paper, Sand the surface, clean & wipe off loose dust, applying
12) putty/ texture paint filler by putty knife / muslin pad, air dry for
2 - 3 hrs for the surface preparation including cost and
conveyance of all materials to work site and all operational,
incidental, labour charges, scaffolding charges, overheads and
contractors profit etc., complete for finished item of work in all
floors for external walls

For Brick Masonry wall 1 x 2 320 0.65 416.00

For Brick Masonry 4 x 98 0.3 1.3 152.88

pedestal above the
basement wall @ 5 m
c/c
568.88 Sqm 475.22 Sqm 270,340.92
13 (BLD- Supply & application of one coat water based cement primer of
CSTN- exterior grade II and two coats of acrylic exterior emulsion
12-2& paint having VOC (Volatile Organic Compound) content less
Amend than 50 grams/litre for exterior walls including cost and
ment in conveyance of all materials to site,and all operational,
SoR incidental, labour charges etc., and overheads & contractors
2011- profit complete for finished item of work in all floors.
12)

For Brick Masonry 1 x 2 320.00 0.65 416.00

For Brick Masonry 4 x 98 0.3 1.3 152.88
pedestal above the
basement wall @ 5 m
c/c
568.88 Sqm 305.26 Sqm 173,656.31
Unforeseen Items
Grand Total 5,779,630.78
 CIVIL DATA : Page-119

D A T A ( SOR 2022-23)
Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District
Andhra Pradesh. ( AMRUT 2.0 )

CEMENT MORTAR PER CUM CM (1:2) CM (1:3) CM (1:4) CM (1:5) CM (1:6) CM (1:8)
Cost of Sand for mortar & Plastering 2284.80 2284.80 2284.80 2284.80 2284.80 2284.80
( 1.05 cum )
Cost of cement 3038.40 2025.60 1519.20 1215.36 1012.80 759.60
Mazdoor ( Unskilled ) for mixing mortar 105.00 105.00 105.00 105.00 105.00 105.00
( 0.20 Nos.)

MA @ 40% 42.00 42.00 42.00 42.00 42.00 42.00

Rate per Cum 5470.20 4457.40 3951.00 3647.16 3444.60 3191.40

20 mm HBG graded metal

Aggregates 20mm nominal size 0.60 1970.20 1182.12
Aggregates 13.20 / 12.50mm nominal 0.15 1665.20 249.78
size
Aggregates 10mm nominal size 0.15 1475.20 221.28
Aggregates 6mm nominal size 0.10 1270.20 127.02
Rate per Cum 1780.20

12 mm HBG graded metal

Aggregates 13.20 / 12.50mm nominal 0.60 1665.20 999.12
size
Aggregates 10mm nominal size 0.20 1475.20 295.04
Aggregates 6mm nominal size 0.20 1270.20 254.04
Rate per Cum 1548.20

DATA (2017-18)

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Dismantling & Clearing work's
1 Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable
materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before
dismantling including all labour charges , overheads & contractor profit etc., complete

a) Brick masonry
(BLD-CSTN-14-9/299)
Mazdoor(unskilled) 0.409 Nos. 525.00 1 Each 214.73
MA @ 40% 0.40 214.73 85.89
Rate per 1 cum 300.62
Overheads & Contractors Profit 0.13615 300.62 40.93
@13.615%
Rate per 1 cum 341.54

b) Unreinforced cement concrete up to 15cm thickness

(BLD-CSTN-14-8/296)
Mazdoor(unskilled) 2.44 Nos. 525.00 1 Each 1281.00
MA @ 40% 0.40 1281.00 512.40
 CIVIL DATA : Page-120

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Rate per 1 cum 1793.40
Overheads & Contractors Profit 0.13615 1793.40 244.17
@13.615%
Rate per 1 cum 2037.57

c) Unreinforced cement concrete more than 15cm thickness

(BLD-CSTN-14-8/297)
Mazdoor(unskilled) 4.88 Nos. 525.00 1 Each 2562.00
MA @ 40% 0.40 2562.00 1024.80
Rate per 1 cum 3586.80
Overheads & Contractors Profit 0.13615 3586.80 488.34
@13.615%
Rate per 1 cum 4075.14

d) Reinforced cement concrete

(BLD-CSTN-14-8/298)
Mazdoor(unskilled) 4.32 Nos. 525.00 1 Each 2268.00
MA @ 40% 0.40 2268.00 907.20
for cutting steel bars (BLD-CSTN-14-
10/300)
Blacksmith 2nd class 0.50 Nos. 565.00 1 Each 282.50
Mazdoor(Male) 0.50 Nos. 525.00 1 Each 262.50
MA @ 40% 0.40 545.00 218.00
Rate per 1 cum 3938.20
Overheads & Contractors Profit 0.13615 3938.20 536.19
@13.615%
Rate per 1 cum 4474.39

e) Kadapa slabs or shahabad stone slabs on sand bed

Rate as per SSR- BMT-S.11 10.00 sqm 84.00 10 sqm 84.00
MA @ 40% 0.40 84.00 33.60
Rate per 10 sqm 117.60
Rate per 1 sqm 11.76
Overheads & Contractors Profit 0.13615 11.76 1.60
@13.615%
Rate per 1 sqm 13.36

f) Stone masonry in cement mortar

Rate as per SSR -BMT-S.01 1.00 cum 498.00 1 cum 498.00
MA @ 40% 0.40 498.00 199.20
Rate per 1 cum 697.20
Overheads & Contractors Profit 0.13615 697.20 94.92
@13.615%
Rate per 1 cum 792.12

g) Pan tiled or Mangalore tiled roof with out roof timbers :

Rate as per SSR- BMT-S.04 10.00 sqm 152.00 10 sqm 152.00
MA @ 40% 0.40 152.00 60.80
Rate per 10 sqm 212.80
Rate per 1 sqm 21.28
Overheads & Contractors Profit 0.13615 21.28 2.90
@13.615%
Rate per 1 sqm 24.18
 CIVIL DATA : Page-121

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

h) Flat stone in roof or floors including lifting :

Rate as per SSR- BMT-S.03 10.00 sqm 182.00 10 sqm 182.00
MA @ 40% 0.40 182.00 72.80
Rate per 10 sqm 254.80
Rate per 1 sqm 25.48
Overheads & Contractors Profit 0.13615 25.48 3.47
@13.615%
Rate per 1 sqm 28.95

i) Wrought and framed timber in roofs or floors ;

Rate as per SSR S.No.826(BMT-S.06) 1.00 cum 263.00 1 cum 263.00
MA @ 40% 0.40 263.00 105.20
Rate per 1 cum 368.20
Overheads & Contractors Profit 0.13615 368.20 50.13
@13.615%
Rate per 1 cum 418.33

j) Old lime mortar plaster

Rate as per SSR BMT-S.07 10.00 sqm 60.00 10 sqm 60.00
MA @ 40% 0.40 60.00 24.00
Rate per 10 sqm 84.00
Rate per 1 sqm 8.40
Overheads & Contractors Profit 0.13615 8.40 1.14
@13.615%
Rate per 1 sqm 9.54

k) Old cement mortar plaster

Rate as per SSR BMT-S.08 10.00 sqm 75.00 10 sqm 75.00
MA @ 40% 0.40 75.00 30.00
Rate per 10 sqm 105.00
Rate per 1 sqm 10.50
Overheads & Contractors Profit 0.13615 10.50 1.43
@13.615%
Rate per 1 sqm 11.93

l) Clean removal of lime plaster from walls and raking out joints 20mm deep
or from terraced roof and raking out joints 100 mm deep
Rate as per SSR BMT-S.14 10.00 sqm 55.00 10 sqm 55.00
MA @ 40% 0.40 55.00 22.00
Rate per 10 sqm 77.00
Rate per 1 sqm 7.70
Overheads & Contractors Profit 0.13615 7.70 1.05
@13.615%
Rate per 1 sqm 8.75

m) Clean removal of cement plaster from walls and raking out joint 200 mm deep
Rate as per SSR BMT-S.15 10.00 sqm 68.00 10 sqm 68.00
MA @ 40% 0.40 68.00 27.20
Rate per 10 sqm 95.20
Rate per 1 sqm 9.52
Overheads & Contractors Profit 0.13615 9.52 1.30
@13.615%
Rate per 1 sqm 10.82
 CIVIL DATA : Page-122

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
2 Dismantling doors , windows and clear storey windows, Ventilators etc., ( wood or steel ) shutters including
Chowkhats , architraves, hold fasts and other attachments etc., and stacking them within 100m lead
including labour charge etc., and overheads & contractors profit complete for finished item of work

(BLD-CSTN-14-11)
a) Not exceeding 3 sqm in area :
Details of cost per each :
2nd class mason 0.10 Nos. 565.00 1 No. 56.50
Mazdoor(Male) 0.20 Nos. 525.00 1 No. 105.00
2nd class Blacksmith 0.05 Nos. 565.00 1 No. 28.25
MA @ 40% 0.40 189.75 75.90
265.65
Overheads & Contractors Profit 0.13615 265.65 36.17
@13.615%
Cost per each 301.82

b) Exceeding 3 sqm in area :

Details of cost per each :
2nd class mason 0.13 Nos. 565.00 1 No. 73.45
Mazdoor(Male) 0.27 Nos. 525.00 1 No. 141.75
2nd class Blacksmith 0.07 Nos. 565.00 1 No. 39.55
MA @ 40% 0.40 254.75 101.90
356.65
Overheads & Contractors Profit 0.13615 356.65 48.56
@13.615%
Cost per each 405.21

1 RBR- Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees
STCL-2 of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and
stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and
disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201
MORD / MORTH. By Mechanical Means

In area of non-thorny jungle (light jungle)

Taking output : 10000.00 Sqm
Unit = 1.00 Sqm
A) Machinery
Dozer D 50 with attachment or suitable 10.00 Hours 1907.00 1 Hour 19070.00
machinery for removal of trees &
stumps

Tractor 1.00 Hours 521.00 1 Hour 521.00

B) LABOUR
Mazdoor (unskilled) 4.16 Day 525.00 1 Day 2184.00
MA @ 40% 0.40 2184.00 873.60
22648.60
Overheads & Contractors Profit 0.13615 22648.60 3083.61
@13.615%
Rate per 10 Sqm = (a+b)/1000 25.73

Rate per 1 sqm 2.57

Earth work excavation
 CIVIL DATA : Page-123

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
1 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in
ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all
operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)

(BLD-CSTN-2-1)
Ordinary Soil - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 3.64 Nos. 525.00 1 No. 1911.00
MA @ 40% 0.40 1911.00 764.40
2675.40
b&c)
Overheads & Contractors Profit @13.61 0.13615 2675.40 364.26
Cost for 10 cum ( a+b+c) 3039.66
Rate per 1 cum 303.97

2 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit
complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-2)
Ordinary Soil - Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 240.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 525.00 1 No. 4368.00
MA @ 40% 0.40 4368.00 1747.20
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 3157.40 1 Hour 18944.40
Crew charges 6.00 hours 326.30 1 Hour 1957.80
Add MA on crew charges 0.40 1957.80 783.12
27800.52
c&d)
Overheads & Contractors Profit @13.61 0.13615 27800.52 3785.04
Cost for 240 cum ( a+b+c+d) 31585.56
Rate per 1 cum (a+b+c+d) / 240 131.61

3 Earth work excavation for foundations (Manual Means) of buildings in ordinary rock ( not requiring blasting
) and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit
complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLD-CSTN-2-4)
Ordinary rock(not requiring blasting) - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 525.00 1 No. 2730.00
 CIVIL DATA : Page-124

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.40 2730.00 1092.00
3822.00
b&c)
Overheads & Contractors Profit @13.61 0.13615 667.50 3822.00 520.37
Cost for 10 cum ( a+b+c) 4342.37
Rate per 1 cum (a+b+c) / 10 434.24
Rate per 1 cum

4 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)
(BLKD-CSTN-2-5)
Ordinary rock(not requiring blasting)- Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 180.00 cum
a) Labour
Mazdoor ( Unskilled) 6.24 Nos. 525.00 1 No. 3276.00
MA @ 40% 0.40 3276.00 1310.40
b) Machinery
Shovel 0.50cum 75hp 6.00 hours 3157.40 1 Hour 18944.40
Crew charges 6.00 hours 326.30 1 Hour 1957.80
Add MA on crew charges 0.40 1957.80 783.12
26271.72
c&d)
Overheads & Contractors Profit @13.61 0.13615 26271.72 3576.89
Cost for 180 cum ( a+b+c+d) 29848.61
Rate per 1 cum (a+b+c+d) / 180 165.83
Rate per 1 cum

5 Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositing on bank
for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental, labour
charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for
finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-6)
Hard rock (requiring blasting)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Driller 0.50 Nos. 615.00 1 No. 307.50
Blaster 0.25 Nos. 690.00 1 No. 172.50
Mazdoor ( Unskilled) 8.35 Nos. 525.00 1 No. 4383.75
MA @ 40% 0.40 4863.75 1945.50
b) Machinery
Air compressor 7cmm (diesel) 1.00 hour 1452.80 1 Hour 1452.80
Jack hammer/Pneumatic breaker 2.00 hours 18.60 1 Hour 37.20
Crew charges
Air compressor 1.00 Hours 294.50 1 Hour 294.50
Jack hammer/Pneumatic breaker 2.00 Hours 460.20 1 Hour 920.40
Add MA on crew charges 0.40 1214.90 485.96
c)Material
Gelatin 80% 3.50 Kgs 68.00 1 Kg 238.00
 CIVIL DATA : Page-125

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Detonator electric 14 Nos. 12.00 1 No. 168.00
10406.11
c&d)
Overheads & Contractors Profit @13.61 0.13615 10406.11 1416.79
Cost for 10 cum ( a+b+c+d) 11822.90
Rate per 1 cum (a+b+c+d) / 10 1182.29
Rate per 1 cum

6 Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit
complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

(BLKD-CSTN-2-7)
Hard rock (blasting prohibited)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 525.00 1 No. 2730.00
MA @ 40% 0.40 2730.00 1092.00
b) Machinery
Air compressor 6.00 Hours 1452.80 1 Hour 8716.80
Jack hammer/Pneumatic breaker 12.00 Hours 18.60 1 Hour 223.20
Crew charges
Air compressor 6.00 Hours 294.50 1 Hour 1767.00
Jack hammer/Pneumatic breaker 12.00 Hours 460.20 1 Hour 5522.40
Add MA on crew charges 0.40 7289.40 2915.76
22967.16
c&d)
Overheads & Contractors Profit @13.61 0.13615 22967.16 3126.98
Cost for 10 cum ( a+b+c+d) 26094.14
Rate per 1 cum (a+b+c+d) / 10 2609.41
Rate per 1 cum

3 Boring for Cast-in-Situ piles Augering and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building
foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911
- 1980 as per approved designs including all operations, incidental, labour charges, hire charges of
machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for
piles of following diameters.

Amendment in page 400 of SoR 2011-2012

a) Up to 300 mm dia
Unit : 1 RM
a) Labour
Mazdoor ( Unskilled) 0.526 Nos. 525.00 1 No. 276.15
MA @ 40% 0.40 276.15 110.46
386.61
Overheads & Contractors Profit @13.61 0.13615 386.61 52.64
Rate per 1Rmt 439.25
b) Up to 350 mm dia to 450 mm dia
Unit : 1 RM
a) Labour
Mazdoor ( Unskilled) 0.631 Nos. 525.00 1 No. 331.28
 CIVIL DATA : Page-126

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.40 331.28 132.51
463.78
Overheads & Contractors Profit @13.61 0.13615 463.78 63.14
Rate per 1Rmt 526.93

4 Under Reaming for Cast-in-Situ piles Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations
in loamy, clayey soils like Black cotton soils and ordinary soils with Augering and boring equipment in site as
per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of
machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for
piles of following diameters.

Amendment in page 400 of SoR 2011-2012

a) Up to 300 mm dia - double under reaming

Unit : 1 Bulb each
a) Labour
Mazdoor ( Unskilled) 0.560 Nos. 525.00 1 No. 294.00
MA @ 40% 0.40 294.00 117.60
411.60
Overheads & Contractors Profit @13.61 0.13615 411.60 56.04
Rate per 1 each 467.64
b) Up to 350 mm dia to 450 mm dia - double under reaming
Unit : 1 RM
a) Labour
Mazdoor ( Unskilled) 0.789 Nos. 525.00 1 No. 414.23
MA @ 40% 0.40 414.23 165.69
579.92
Overheads & Contractors Profit @13.61 0.13615 579.92 78.96
Rate per 1Rmt 658.87
Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T & P,
labour charges etc., and overheads & contractors profit complete for finished item of work.

Rate as per SoR 1 cum 96.00 1 cum 96.00

Rate per 1 cum 96.00

1 As per Carting away of excavated earth / debris to a lead of 1KM (the rate including conveyance charges, loading,
SOR 16- unloading charges by mechanical means ) including ideal hire charges of truck etc. complete as directed by
17 the Departmental Authorities of the work.

Conveyance for 1 KM vide Pg.No.39 of 1.000 Cum 31.69 1 Cum 31.69

SSR 2016-17
Loading charges by mechanical means 1.000 Cum 114.33 1 Cum 114.33
vide Pg.No.39 of SSR 2016-17
Overheads & Contractors Profit 0.13615 146.02 19.88
@13.615%
Total 165.90

Filling work's
2 Filling with carted coarse sand in Children play area with initial lead in layers not exceeding 15cm thick,
watering and ramming including cost and conveyance of water to work site and all operational,
incidental ,labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished
item of work(APSS NO.309&310)

(BLD-CSTN-2-8) & Amendment in page 12 of SoR 2014.15

Unit : 1 cum
 CIVIL DATA : Page-127

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Taking output 6.00 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No. 162.75
MA @ 40% 0.40 162.75 65.10
b)Material :
Coarse sand for filling 6.00 cum 1024.00 1 cum 6144.00
Water 0.10 Kl 103.00 1 Kl 10.30
6382.15
Overheads & Contractors Profit 0.13615 6382.15 868.93
@13.615%
Rate per 6 cum 7251.08
Rate per 1 cum 1208.51

2 Filling with carted gravel in trenches, sides of foundations and basement with initial lead in layers not
exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all
operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete
for finished item of work(APSS NO.309&310)

(BLD-CSTN-2-8) & Amendment in page 12 of SoR 2014.15

Unit : 1 cum
Taking output 6.00 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No. 162.75
MA @ 40% 0.40 162.75 65.10
b)Material :
Gravel 6.00 cum 439.40 1 cum 2636.40
Water 0.72 Kl 103.00 1 Kl 74.16
2938.41
Overheads & Contractors Profit 0.13615 2938.41 400.06
@13.615%
Rate per 6 cum 5349.56
Rate per 1 cum 556.41

#REF! Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming
including cost and conveyance of water to work site and all operational, incidental, labour charges, hire
charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS
NO.309&310)
(BLD-CSTN-2-9) & Amendment in page 13 of SoR 2014.15
Unit : 1 cum
Taking output : 6.00 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 525.00 1 No. 162.75
MA @ 40% 0.40 162.75 65.10
227.85
Water 0.72 Kl 103.00 1 Kl 74.16
Rate per 6 cum (a+b+c) 302.01
Overheads & Contractors Profit 0.13615 302.01 41.12
@13.615% 343.13
Rate per 1 cum 57.19

Cement Concrete (nominal mix)

 CIVIL DATA : Page-128

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
3 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from
approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water
etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required
level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

(BLD-CSTN-3-5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 4220.00 1000 Kgs 683.64
Coarse aggregate 40MM 0.90 Cum 1370.20 1 Cum 1233.18
Fine aggregate ( Sand ) 0.45 Cum 2081.00 1 Cum 936.45
Water (including curing) 1.20 kl 103.00 1 kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 188.10 1 hour 188.10
cum)capacity
Crew charges 1.00 hour 306.80 1 hour 306.80
Add MA on crew charges 0.40 306.80 122.72
C.LABOUR :
1st class mason 0.10 Nos. 630.00 1 63.00
Mazdoor (unskilled) 1.39 Nos. 525.00 1 Each 729.75
MA @ 40% 0.40 792.75 317.10
4704.34
Overheads & Contractors Profit 0.13615 4704.34 640.50
@13.615%
Rate per 1 cum 5344.84

5 Vibrated Plain Cement Concrete (1:3:6) nominal mix using 220 kg of cement and 20mm graded machine
crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, sales & other taxes on all
materials, all charges for Concrete Mixer , machine mixing, laying concrete in position, vibrating, curing,
centring charges, overheads & contractors profit etc., for finished item of work for footings and basement .

(BLD-CSTN-3-10 & 11)

Unit : 1cum
A.MATERIALS :
HBG 40mm size metal 0.00 Cum 1370.20 1 Cum 0.00
HBG 20mm size graded metal 0.90 Cum 1780.20 1 Cum 1602.18
Sand 0.45 Cum 2081.00 1 Cum 936.45
Cement 220.00 Kgs 4220.00 1 MT 928.40
Water ( including for curing ) 1.20 Kl 103.00 1 Kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 188.10 1 hour 188.10
cum)capacity
Crew Charges 1.00 hour 306.80 1 hour 306.80
Add MA on crew charges 0.40 306.80 122.72
Needle vibrator 40mm ( petrol ) 1.00 hours 38.20 1 hour 38.20
Crew charges 1.00 hours 220.90 1 hour 220.90
 CIVIL DATA : Page-129

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Add MA on crew charges 0.40 220.90 88.36
C.LABOUR :
1st class mason 0.10 Nos. 630.00 1 Each 63.00
Mazdoor (Unskilled) 1.39 Nos. 525.00 1 Each 729.75
MA @ 40% 0.40 792.75 317.10
Rate for 1 cum 5665.56
Centring & Scaffolding (Hire) 1.00 Cum 67.00 1 Cum 67.00
Centring & Scaffolding (Labour) 1.00 Cum 363.00 1 Cum 363.00
MA @ 40% 0.40 363.00 145.20
6240.76
Overheads & Contractors Profit 0.13615 6240.76 849.68
@13.615%
Rate per 1 cum 7090.44

6 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including
sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing
etc., & lift charges , and overheads & contractors profit for Bed Blocks & Hold Fasts for finished item of work.
(APSS No. 402)
(BLD-CSTN-3-10 & 11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1780.20 1 Cum 1602.18
Sand 0.45 Cum 2081.00 1 Cum 936.45
Cement 220.00 Kgs 4220.00 1 MT 928.40
Water ( including for curing ) 1.20 Kl 103.00 1 Kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 1.00 hour 188.10 1 hour 188.10
cum)capacity
Crew Charges 1.00 hour 306.80 1 hour 306.80
Add MA on crew charges 0.40 306.80 122.72
C.LABOUR :
1st class mason 0.10 Nos. 630.00 1 Each 63.00
Mazdoor (Unskilled) 1.39 Nos. 525.00 1 Each 729.75
MA @ 40% 0.40 792.75 317.10
Rate per 1 cum 5318.10

Rate for other Floors FF

Rate as worked out above 5318.10
Hire charges of centring and scaffolding 67.00
Lift charges for scaffolding 363.00
MA @ 40% 145.20
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
Rate per 1 cum 5893.30
Overheads & Contractors Profit 802.37
@13.615%
Rate per 1 cum 6695.67

Design mix concrete

 CIVIL DATA : Page-130

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
7 Plain Cement Concrete M 20 design mix using WEIGH BATCHER / MIXER, 20mm size hard granite machine
crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved
quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete ,and using mixed with integral
cement water proofing powder confirming to IS: 2645-2003 manufactured by reputed manufacturers as
approved by Engineer-in-charge at 0.5 Kg per one bag of cement including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centring,
shuttering, machine mixing, lift charges, laying concrete, vibrating, curing, overheads & contractors profit
etc., complete for finished item of work (APSS No. 402 & 403) for Stairs Base slab/ steps
(BLD-CSTN-3-16)
Unit : 1cum
A.MATERIALS :
Cement 330.00 Kgs 4220.00 1000 Kgs 1392.60
HBG 20mm size metal 0.80 Cum 1780.20 1 Cum 1424.16
Sand 0.40 Cum 2081.00 1 Cum 832.40
Water ( including for curing ) 1.20 Kl 103.00 1 Kl 123.60
Integral Cement Waterproofing 3.50 Ltr 205.00 1 Ltr 717.50
Admixture for Concrete Slabs and
mortar plastering works. ( Dosage :
100ml Per bag of 50 Kgs Cement)
Complies with I.S. 2645-2003

B.MACHINERY :
Batching plant 0.50 cum 0.308 hour 233.80 1 hour 72.01
Crew charges 0.308 hour 473.50 1 hour 145.84
Needle vibrator 40mm ( petrol ) 0.308 hours 38.20 1 hour 11.77
Crew charges 0.308 hours 220.90 1 hour 68.04
Add MA on crew charges 0.40 213.88 85.55
C.LABOUR :
1st class mason 0.067 Nos. 630.00 1 Each 42.21
2nd class mason 0.067 Nos. 565.00 1 Each 37.86
Mazdoor (Unskilled) 3.077 Nos. 525.00 1 Each 1615.43
MA @ 40% 0.40 1695.49 678.20
Rate per 1 cum 7247.15

Rate for other Floors FF SF TF 4F

Cost of M 20 design mix 7247.15 7247.15 7247.15 7247.15
Hire charges of centring and scaffolding 0.00 67.00 67.00 67.00
Lift charges for scaffolding 0.00 399.30 435.60 471.90
MA @ 40% 0.00 159.72 174.24 188.76
Lift charges ( Page 131 of Std. Data ) 0.00 169.55 339.10 508.65

MA @ 40% 0.00 67.82 135.64 203.46

Rate per 1 cum 7247.15 8110.54 8398.72 8686.91
Overheads & Contractors Profit 986.70 1104.25 1143.49 1182.72
@13.615%
Rate per 1 cum 8233.85 9214.79 9542.21 9869.64

8 Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum
quantity of 330 kgs. of cement per 1 cum of concrete using WEIGH BATCHER / MIXER including cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site
including steel centring, shuttering, labour charges such as weigh batching, machine mixing, laying concrete,
lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402
& 403) for platforms and shelves.
 CIVIL DATA : Page-131

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 330.00 Kgs 4220.00 1000 Kgs 1392.60
12mm HBG graded metal 0.80 Cum 1548.20 1 Cum 1238.56
Sand 0.40 Cum 2081.00 1 Cum 832.40
B.LABOUR :
1st class Mason 0.067 Nos 630.00 1 Each 42.21
2nd class Mason 0.133 Nos 565.00 1 Each 75.15
Mazdoor (both men&women) 3.077 Nos 525.00 1 Each 1615.43
MA @ 40% 0.40 1732.78 693.11
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 233.80 1 hour 72.01
Crew charges 0.308 hour 473.50 1 hour 145.84
Add MA on crew charges 0.40 145.84 58.34
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Basic cost per 1cum 6289.24

a) 50mm thick platforms :

Cost of M 20 design mix 0.05 cum 6289.24 1 cum 314.46

Rate for other Floors FF SF TF 4F

Rate as worked out above 314.46 314.46 314.46 314.46
Hire charges of centring and scaffolding 82.50 82.50 82.50 82.50
(50% of roof slab)
Lift charges for scaffolding 93.00 102.50 111.50 0.00
MA @ 40% 37.20 41.00 44.60 0.00
Lift charges ( Page 131 of Std. Data ) 0.00 8.66 17.33 25.99

MA @ 40% 0.00 3.47 6.93 10.40

Rate per 1 sqm 527.16 552.59 577.32 433.35
Overheads & Contractors Profit 71.77 75.24 78.60 59.00
@13.615%
Rate per 1 sqm 598.93 627.83 655.92 492.35

b) 25mm thick shelves :

Cost of M 20 design mix 0.025 cum 6289.24 1 cum 157.23
Rate per 1sqm 157.23

Rate for other Floors FF SF TF 4F

Rate as worked out above 157.23 157.23 157.23 157.23
Hire charges of centring and scaffolding 41.25 41.25 41.25 41.25
(25% of roof slab)
Lift charges for scaffolding 46.50 51.25 55.75 0.00
MA @ 40% 18.60 20.50 22.30 0.00
Lift charges ( Page 131 of Std. Data ) 0.00 4.33 8.66 13.00

MA @ 40% 0.00 1.73 3.47 5.20

Rate per 1 sqm 263.58 276.30 288.66 216.68
Overheads & Contractors Profit 35.89 37.62 39.30 29.50
@13.615%
Rate per 1 sqm 299.47 313.91 327.96 246.18
 CIVIL DATA : Page-132

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Nominal Mix
9 Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum
cement content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry and including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water, etc., to site and sales & other taxes on all materials , centring using Steel scaffolding pipes ,
jack props , Waller’s , Foot plates , brackets , steel centring plates etc., including all operational, incidental
and labour charges such as machine mixing, laying concrete, vibrator, , curing etc., and overheads &
contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work
(APSS No. 402)

(BLD-CSTN-3-13-A)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 350.00 Kgs 4220.00 1000 Kgs 1477.00
20mm HBG graded metal 0.90 Cum 1780.20 1 Cum 1602.18
Sand 0.45 Cum 2081.00 1 Cum 936.45
B.LABOUR :
1st class Mason 0.133 Nos 630.00 1 Each 83.79
2nd class Mason 0.267 Nos 565.00 1 Each 150.86
Mazdoor (both men&women) 3.60 Nos 525.00 1 Each 1890.00
MA @ 40% 0.40 2124.65 849.86
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.000 hours 188.10 1 hour 188.10
capacity
Crew charges 1.000 hours 306.80 1 hour 306.80
Needle vibrator 40mm ( petrol ) 1.000 hours 38.20 1 hour 38.20
Crew charges 1.000 hours 220.90 1 hour 220.90
Add MA on crew charges 0.40 527.70 a 211.08
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 8078.81

* a Footings
Rate for Cost of M 20 Nominal mix 1.00 Cum 8078.81 1 Cum 8078.81
Hire charges of centring and scaffolding 1.00 Cum 301.00 1 Cum 301.00
Labour charges 1.00 Cum 672.00 1 Cum 672.00
MA @ 40% 0.40 672.00 268.80
9320.61
Overheads & Contractors Profit 0.13615 9320.61 1269.00
@13.615%
Rate per 1 cum 10589.61

* a.1) 0.450mm thick Retaining wall

Nominal Mix Concrete M 20 grade 0.45 cum 8078.81 1.00 cum 3635.47

Rate for other Floors FF SF

Rate as above 3635.47 3635.47
PH-31-B Hire charges of centring and scaffolding 0.00 0.00

Labour charges 0.00 0.00

MA @ 40% 0.00 0.00
Lift charges of materials(Manual) 0.00 95.61
MA @ 40% 0.00 38.24
Rate per 1 sqm 3635.47 3769.31
 CIVIL DATA : Page-133

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Overheads & Contractors Profit 494.97 513.19
@13.615%
Rate per 1 sqm 4130.44 4282.50

b Column pedestals
Rate for Cost of M 20 Nominal mix 1.00 Cum 8078.81 1 Cum 8078.81
Hire charges of centring and scaffolding 1.00 Cum 343.00 1 Cum 343.00
Labour charges 1.00 Cum 1069.00 1 Cum 1069.00
MA @ 40% 0.40 1069.00 427.60
9918.41
Overheads & Contractors Profit 0.13615 9918.41 1350.39
@13.615%
Rate per 1 cum 11268.80

c Plinth Beams
Rate for Cost of M 20 Nominal mix 1.00 Cum 8078.81 1 Cum 8078.81
Hire charges of centring and scaffolding 1.00 Cum 1453.00 1 Cum 1453.00
Labour charges 1.00 Cum 1620.00 1 Cum 1620.00
MA @ 40% 0.40 1620.00 648.00
11799.81
Overheads & Contractors Profit 0.13615 11799.81 1606.54
@13.615%
Rate per 1 cum 13406.36

d Base slab 450 mm thick for Sump / Septic tank :

Rate for Cost of M 20 Nominal mix 0.45 Cum 8078.81 1 Cum 3635.47
Hire charges of centring and scaffolding 0.45 Cum 67.00 1 Cum 30.15
Labour charges 0.45 Cum 363.00 1 Cum 163.35
MA @ 40% 0.40 163.35 65.34
3894.31
Overheads & Contractors Profit 0.13615 3894.31 530.21
@13.615%
Rate per 1 sqm 4424.52

e Base slab150mm thick for Sump / Septic tank :

Rate for Cost of M 20 Nominal mix 0.15 Cum 8078.81 1 Cum 1211.82
Hire charges of centring and scaffolding 0.15 Cum 67.00 1 Cum 10.05
Labour charges 0.15 Cum 363.00 1 Cum 54.45
MA @ 40% 0.40 54.45 21.78
1298.10
Overheads & Contractors Profit 0.13615 1298.10 176.74
@13.615%
Rate per 1 sqm 1474.84

f Base slab 100mm thick for Sump / Septic tank :

Rate for Cost of M 20 Nominal mix 0.10 Cum 8078.81 1 Cum 807.88
Hire charges of centring and scaffolding 0.10 Cum 67.00 1 Cum 6.70
Labour charges 0.10 Cum 363.00 1 Cum 36.30
MA @ 40% 0.40 36.30 14.52
865.40
Overheads & Contractors Profit 0.13615 865.40 117.82
@13.615%
Rate per 1 sqm 983.23
 CIVIL DATA : Page-134

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
10 Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum
cement content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry and,including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and sales & other taxes on all materials, centring using Casurina Ballies,
Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., including all operational, incidental and
labour charges such as machine mixing, lifting of concrete manually, laying concrete, vibrator, , curing ,
overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)

(BLD-CSTN-3-13-B)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 350.00 Kgs 4220.00 1000 Kgs 1477.00
20mm HBG graded metal 0.90 Cum 1780.20 1 Cum 1602.18
Sand 0.45 Cum 2081.00 1 Cum 936.45
B.LABOUR :
1st class Mason 0.167 Nos 630.00 1 Each 105.21
2nd class Mason 0.167 Nos 565.00 1 Each 94.36
Mazdoor (both men&women) 4.70 Nos 525.00 1 Each 2467.50
MA @ 40% 0.40 2667.07 1066.83
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1.000 hours 188.10 1 hour 188.10
capacity
Crew charges 1.000 hours 306.80 1 hour 306.80
Needle vibrator 40mm ( petrol ) 1.000 hours 38.20 1 hour 38.20
Crew charges 1.000 hours 220.90 1 hour 220.90
Add MA on crew charges 0.40 527.70 211.08
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 8838.20

a Pile Column
Rate per 1 sqm 1.00 Cum 8838.20 1 Cum 8838.20
Overheads & Contractors Profit 0.13615 8838.20 1203.32
@13.615%
Rate per 1 cum 10041.52
b Columns
Rate as above 8838.20
Hire charges of centring and scaffolding 249.00
Labour charges 1871.00
MA @ 40% 748.40
Lift charges of materials(Manual) 0.00
MA @ 40% 0.00
Rate per 1 cum 11706.60
Overheads & Contractors Profit 1593.85
@13.615%
Rate per 1 cum 13300.45

b) Lintels :
Rate for other Floors FF SF TF
Rate as above 8838.20 8838.20 8838.20
Hire charges of centring and scaffolding 826.00 826.00 826.00
Labour charges 1332.00 1465.00 1598.00
MA @ 40% 532.80 586.00 639.20
Lift charges of materials(Manual) 0.00 266.71 533.41
 CIVIL DATA : Page-135

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.00 106.68 213.37
Rate per 1 cum 11529.00 12088.59 12648.18
Overheads & Contractors Profit 1569.67 1645.86 1722.05
@13.615%
Rate per 1 cum 13098.67 13734.45 14370.23

c) WATER TANKS, SUMP, LIFT :

WATER TANKS 150 mm thick side walls

Rate for Cost of M 20 Nominal mix 0.15 cum 8838.20 1.00 cum 1325.73

Rate for other Floors FF SF TF

Rate as above 1325.73 1325.73 1325.73
Hire charges of centring and scaffolding 0.00 0.00 0.00
Lift charges of materials(Manual) 0.00 40.01 80.01
MA @ 40% 0.00 16.00 32.00
Rate per 1 sqm 1325.73 1381.74 1437.74
Overheads & Contractors Profit 180.5 188.12 195.75
@13.615%
Rate per 1 sqm 1506.23 1569.86 1633.49

d) 230 mm thick side walls

Rate for Cost of M 20 Nominal mix 0.52 cum 8838.20 1.00 cum 4595.86

Rate for other Floors FF

Rate as above 4595.86
Hire charges of centring and scaffolding 0.00
Labour charges 0.00
MA @ 40% 0.00
Lift charges of materials(Manual) 0.00
MA @ 40% 0.00
Rate per 1 sqm 4595.86
Overheads & Contractors Profit 625.73
@13.615%
Rate per 1 sqm 5221.59

11 Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum
cement content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site and sales & other taxes on all materials , centring using Casurina Ballies
, Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., including all operational, incidental
and labour charges such as machine mixing, lifting of concrete manually, laying concrete, vibrator, , curing ,
overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)

(BLD-CSTN-3-13-C)
RCC SLABS , BEAMS :
A.MATERIALS :

Cement 350.00 Kgs 4220.00 1000 Kgs 1477.00

20mm HBG graded metal 0.90 Cum 1780.20 1 Cum 1602.18
 CIVIL DATA : Page-136

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Sand 0.45 Cum 2081.00 1 Cum 936.45
B.LABOUR :
1st class Mason 0.067 Nos 630.00 1 Each 42.21
2nd class Mason 0.133 Nos 565.00 1 Each 75.15
Mazdoor (both men&women) 2.500 Nos 525.00 1 Each 1312.50
MA @ 40% 0.40 1429.86 571.94
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 0.267 hours 188.10 1 hour 50.22
capacity
Crew charges 0.267 hours 306.80 1 hour 81.92
Needle vibrator 40mm ( petrol ) 0.267 hours 38.20 1 hour 10.20
Crew charges 0.267 hours 220.90 1 hour 58.98
Add MA on crew charges 0.40 140.90 56.36
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 6398.70

A) Beam's
un supported height up to 3.66 m
Rate for other Floors FF SF TF
Rate as above 6398.70 6398.70 6398.70
Hire charges of centring and scaffolding 1458.00 1458.00 1458.00
Labour , lift charges for scaffolding 1569.00 1726.00 1883.00

MA @ 40% 627.60 690.40 753.20

Lift charges of materials(Manual) 0.00 142.99 285.97
MA @ 40% 0.00 57.19 114.39
Rate for 1 cum 10053.30 10473.28 10893.26
Overheads & Contractors Profit 1368.76 1425.94 1483.12
@13.615%
Rate per 1 cum 11422.06 11899.22 12376.38

B) RCC SLABS :
a) Roof Slabs 115mm thick :
un supported height up to 3.66 m
Rate for Cost of M 20 Nominal mix 0.115 Cum 6398.70 1 Cum 735.85

Rate for other Floors FF SF TF

Rate as above 735.85 735.85 735.85
Hire charges of centring and scaffolding 165.00 165.00 165.00
Labour , lift charges for scaffolding 186.00 205.00 223.00

MA @ 40% 74.40 82.00 89.20

Lift charges of materials(Manual) 0.00 16.44 32.89
MA @ 40% 0.00 6.58 13.15
Rate per 1 sqm 1161.25 1210.87 1259.09
Overheads & Contractors Profit 158.1 164.86 171.43
@13.615%
Rate per 1 sqm 1319.35 1375.73 1430.52

b) Roof Slabs 125mm thick :

un supported height up to 3.66 m
Rate for Cost of M 20 Nominal mix 0.125 Cum 6398.70 1 Cum 799.84
 CIVIL DATA : Page-137

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Rate for other Floors FF SF TF
Rate as above 799.84 799.84 799.84
Hire charges of centring and scaffolding 165.00 165.00 165.00
Labour , lift charges for scaffolding 186.00 205.00 223.00

MA @ 40% 74.40 82.00 89.20

Lift charges of materials(Manual) 0.00 17.87 35.75
MA @ 40% 0.00 7.15 14.30
Rate per 1 sqm 1225.24 1276.86 1327.08
Overheads & Contractors Profit 166.82 173.84 180.68
@13.615%
Rate per 1 sqm 1392.06 1450.70 1507.76

c) Roof Slabs 150mm thick :

Rate for Cost of M 20 Nominal mix 0.15 Cum 6398.70 1 Cum 959.81

un supported height up to 3.66 m

Rate for other Floors FF SF TF
Rate as above 959.81 959.81 959.81
Hire charges of centring and scaffolding 165.00 165.00 165.00
Lift charges for scaffolding 186.00 205.00 223.00
MA @ 40% 74.40 82.00 89.20
Lift charges of materials(Manual) 0.00 21.45 42.90
MA @ 40% 0.00 8.58 17.16
Rate per 1 sqm 1385.21 1441.83 1497.06
Overheads & Contractors Profit 188.6 196.31 203.82
@13.615%
Rate per 1 sqm 1573.81 1638.14 1700.88

d) Roof Slabs 175mm thick :

Rate for Cost of M 20 Nominal mix 0.175 Cum 6398.70 1 Cum 1119.77

for un supported height of 3.66 m

Rate for other Floors FF SF TF
Rate as above 1119.77 1119.77 1119.77
Hire charges of centring and scaffolding 170.00 170.00 170.00
Labour , lift charges for scaffolding 193.00 212.00 232.00

MA @ 40% 77.20 84.80 92.80

Lift charges of materials(Manual) 0.00 25.02 50.04
MA @ 40% 0.00 10.01 20.02
Rate per 1 sqm 1559.97 1621.60 1684.64
Overheads & Contractors Profit 212.39 220.78 229.36
@13.615%
Rate per 1 sqm 1772.36 1842.38 1914.00

e) Base Slabs 300 mm thick :

Rate for Cost of M 20 Nominal mix 0.30 Cum 6398.70 1 Cum 1919.61

for un supported height of 3.66 m

Rate for other Floors FF SF TF
Rate as above 1919.61 1919.61 1919.61
Hire charges of centring and scaffolding 170.00 170.00 170.00
 CIVIL DATA : Page-138

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Labour , lift charges for scaffolding 193.00 212.00 232.00

MA @ 40% 77.20 84.80 92.80

Lift charges of materials(Manual) 0.00 42.90 85.79
MA @ 40% 0.00 17.16 34.32
Rate per 1 sqm 2359.81 2446.46 2534.52
Overheads & Contractors Profit 321.29 333.09 345.07
@13.615%
Rate per 1 sqm 2681.10 2779.55 2879.59

a Foundation/Base Slabs
Rate for Cost of M 20 Nominal mix 1.00 Cum 6398.70 1 Cum 6398.70
Hire charges of centring and scaffolding 1.00 Cum 301.00 1 Cum 301.00
Labour charges 1.00 Cum 672.00 1 Cum 672.00
MA @ 40% 0.40 672.00 268.80
7640.50
Overheads & Contractors Profit 0.13615 7640.50 1040.25
@13.615%
Rate per 1 cum 8680.76

d) 0.23mm thickside wlls

Rate for Cost of M 20 Nominal mix 0.45 cum 6398.70 1.00 cum 2879.42

Rate for other Floors FF SF

Rate as above 2879.42 2879.42
PH-31-B Hire charges of centring and scaffolding 0.00 0.00

Labour charges 0.00 0.00

MA @ 40% 0.00 0.00
Lift charges of materials(Manual) 0.00 64.34
MA @ 40% 0.00 25.74
Rate per 1 sqm 2879.42 2969.50
Overheads & Contractors Profit 392.03 404.3
@13.615%
Rate per 1 sqm 3271.45 3373.80

#REF! Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum
cement content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site and including sales & other taxes on all materials , centring using
Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., for 60cm wide sun-
shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all
operational, incidental and labour charges such as , machine mixing, lifting of concrete manually, laying
concrete, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication
charges for finished item of work (APSS No. 402, 403 & 903)

(BLD-CSTN-3-13-C)
A.MATERIALS :
Cement 350.00 Kgs 4220.00 1000 Kgs 1477.00
20mm HBG graded metal 0.90 Cum 1780.20 1 Cum 1602.18
Sand 0.45 Cum 2081.00 1 Cum 936.45
B.LABOUR :
 CIVIL DATA : Page-139

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
1st class Mason 0.067 Nos 630.00 1 Each 42.21
2nd class Mason 0.133 Nos 565.00 1 Each 75.15
Mazdoor (both men&women) 2.500 Nos 525.00 1 Each 1312.50
MA @ 40% 0.40 1429.86 571.94

C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 0.267 hours 188.10 1 hour 50.22
capacity
Crew charges 0.267 hours 306.80 1 hour 81.92
Add MA on crew charges 0.40 81.92 32.77
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 6305.93

Cost of RCC M 20 Nominal Mix Concrete 0.0375 cum 6305.93 1 cum 236.47

Rate for other Floors FF

Rate as above 236.47
Hire charges of centring and scaffolding 97.80
Labour , lift charges for scaffolding 122.40
MA @ 40% 48.96
Lift charges of materials(Manual) 0.00
MA @ 40% 0.00
Rate per 1 RM 505.63
Overheads & Contractors Profit 68.84
@13.615%
Rate per 1 RM 574.47

#REF! Plain Cement Concrete M 20 Nominal mix using Concrete MIXER, 20mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry,
using a minimum quantity of 350 kgs. of cement per 1 cum of concrete , including cost and conveyance of all
materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centring,
shuttering, machine mixing, lift charges, laying concrete, vibrating, curing, overheads & contractors profit
etc., complete for finished item of work (APSS No. 402 & 403)

(BLD-CSTN-3-13-C)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1780.20 1 Cum 1602.18
Sand 0.45 Cum 2081.00 1 Cum 936.45
Cement 350.00 Kgs 4220.00 1000 Kgs 1477.00
Water ( including for curing ) 1.20 Kl 103.00 1 Kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 0.267 hour 188.10 1 hour 50.22
cum)capacity
Crew charges 0.267 hour 306.80 1 hour 81.92
Needle vibrator 40mm ( petrol ) 0.267 hours 38.20 1 hour 10.20
Crew charges 0.267 hours 220.90 1 hour 58.98
MA @ 40% 0.40 140.90 56.36
C.LABOUR :
1st class mason 0.067 Nos. 630.00 1 Each 42.21
2nd class mason 0.133 Nos. 565.00 1 Each 75.15
Mazdoor (Unskilled) 2.500 Nos. 525.00 1 Each 1312.50
 CIVIL DATA : Page-140

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.40 1429.86 571.94
Rate per 1 cum 6398.70

Rate for other Floors FF

Cost of M 20 design mix 6398.70
Hire charges of centring and scaffolding 0.00
Lift charges for scaffolding 0.00
MA @ 40% 0.00
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
Rate per 1 cum 6398.70
Overheads & Contractors Profit 871.18
@13.615%
Rate per 1 cum 7269.89

#REF! Reinforced Cement Concrete Nominal Mix M 20 grade corresponding to IS 456 with minimum cement
content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with using 12mm size hard granite
machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and
conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site
including steel centring, shuttering, labour charges such as ,Concrete machine mixing, laying concrete, lift
charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 &
403) for platforms and shelves.

(BLD-CSTN-3-13-C)
A.MATERIALS :
Cement 350.00 Kgs 4220.00 1000 Kgs 1477.00
12mm HBG graded metal 0.90 Cum 1548.20 1 Cum 1393.38
Sand 0.45 Cum 2081.00 1 Cum 936.45
B.LABOUR :
1st class Mason 0.067 Nos 630.00 1 Each 42.21
2nd class Mason 0.133 Nos 565.00 1 Each 75.15
Mazdoor (both men&women) 2.500 Nos 525.00 1 Each 1312.50
MA @ 40% 0.40 1429.86 571.94
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 0.267 hours 188.10 1 hours 50.22
capacity
Crew charges 0.267 hours 306.80 1 hours 81.92
Add MA on crew charges 0.25 81.92 1 20.48
Water(including for curing) 1.20 kl 103.00 123.60
Rate per 1 cum 6084.84
a) 50mm thick platforms :
Cost of M 20 design mix 0.05 cum 6084.84 1 cum 304.24

Rate for other Floors FF SF TF

Rate as worked out above 304.24 304.24 304.24
Hire charges of centring and scaffolding 82.50 82.50 82.50
(50% of roof slab)
Lift charges for scaffolding 93.00 102.50 111.50
MA @ 40% 37.20 41.00 44.60
Lift charges ( Page 131 of Std. Data ) 0.00 7.15 14.30
 CIVIL DATA : Page-141

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.00 2.86 5.72
Rate per 1 sqm 516.94 540.25 562.86
Overheads & Contractors Profit 70.38 73.56 76.63
@13.615%
Rate per 1 sqm 587.32 613.81 639.49

b) 25mm thick shelves :

Cost of M 20 design mix 0.025 cum 6084.84 1 cum 152.12
Rate per 1sqm 152.12

Rate for other Floors FF SF TF

Rate as worked out above 152.12 152.12 152.12
Hire charges of centring and scaffolding 41.25 41.25 41.25
(25% of roof slab)
Lift charges for scaffolding 46.50 51.25 55.75
MA @ 40% 18.60 20.50 22.30
Lift charges ( Page 131 of Std. Data ) 0.00 3.57 7.15

MA @ 40% 0.00 1.43 2.86

Rate per 1 sqm 258.47 270.13 281.43
Overheads & Contractors Profit 35.19 36.78 38.32
@13.615%
Rate per 1 sqm 293.66 306.90 319.75

Brick masonry
#REF! Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common
burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms
from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all
materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials
and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift
charges, curing, etc., and overheads & contractors profit complete for finished item of work. (APSS No. 501 &
504).

(BLD-CSTN-5-5)
Unit : 1cum
A.MATERIALS :
Cement 36.00 Kgs 4220.00 1000 Kgs 151.92
Common burnt clay bricks 23x11x7cms 512 Nos 8058.30 1000 Nos 4125.85
Fine aggregate ( Sand ) 0.20 cu.m. 2176.00 1 cu.m. 435.20
B.LABOUR :
1st class mason 0.24 Nos. 630.00 1 Each 151.20
2nd class mason 0.56 Nos. 565.00 1 Each 316.40
Mazdoor (Unskilled) 1.89 Nos. 525.00 1 Each 992.25
MA @ 40% 0.40 1459.85 583.94
water charges @ 1% 0.01 6756.76 67.57
Rate per 1 cum 6824.33

a Up to basement
Rate as worked out above 1.00 Cum 6824.33 1 Cum 6824.33
Overheads & Contractors Profit 0.13615 6824.33 929.13
@13.615%
Rate per 1 cum 7753.46
 CIVIL DATA : Page-142

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

b) Superstructure :
Rate for other Floors FF SF TF
Rate as worked out above 6824.33 6824.33 6824.33
Hire charges for Access Scaffolding 46.87 46.87 46.87

Labour charges for scaffolding 368.17 526.87 685.74

MA @ 40% 147.27 210.75 274.30
Lift charges ( Page 131 of Std. Data ) 0.00 145.99 291.97

MA @ 40% 0.00 58.40 116.79

Rate per 1 cum 7386.63 7813.20 8239.99
Overheads & Contractors Profit 1005.69 1063.77 1121.87
@13.615%
Rate per 1 cum 8392.32 8876.97 9361.86
Say 8392 8877 9362

#REF! Brick Masonry for super-structure on ground floor (11.0 cm thick) in CM (1:4) prop. (Cement : Screened
sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size
23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and including cost
and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on
all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding
charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit complete for
finished item of work.

(BLD-CSTN-5-11)
Unit : 10 sqm
A.MATERIALS :
Common burnt clay bricks 23x11x7cms Nos. 565.00 8058.30 1000 565.00 4552.94

Cement Kgs 79.20 4220.00 1000 Kgs 334.22

Fine aggregate (sand) Cum 0.22 2176.00 1 Cum 478.72
B.LABOUR :
1st class mason day 0.6 630.00 1 day 378
2nd class mason day 0.6 565.00 1 day 339
Mazdoor (Unskilled) day 2.75 525.00 1 day 1443.75
MA @ 40% 0.40 2160.75 864.3
Add water charges 1% 0.01 8390.93 83.91
D.Grand Total for 10 sqm 8474.84
Overheads&Contractors Profit 0.13615 8474.84 1153.85
@13.615%
Rate per 10 Sqm 9628.69
Rate per 1 Sqm 962.87

#REF! Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Screened sand)
using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23
x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of
6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of
main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand,
bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges
such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges,
curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges
complete for finished item of work. (APSS No. of 501 & 509)
(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
 CIVIL DATA : Page-143

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Common burnt clay bricks 23x11x7cms 565 Nos. 8058.30 1000 Nos. 4552.94
Cement 79.20 Kgs 4220.00 1000 Kgs 334.22
Fine aggregate ( Sand ) 0.22 cu.m. 2176.00 1 cu.m. 478.72
B.LABOUR :
1st class mason 0.60 Nos. 630.00 1 Each 378.00
2nd class mason 0.60 Nos. 565.00 1 Each 339.00
Mazdoor (Unskilled) 2.75 Nos. 525.00 1 Each 1443.75
MA @ 40% 0.40 2160.75 864.30
water charges @ 1% 0.01 8390.93 83.91
Rate per 10 sqm 8474.84
Rate per 1 sqm 847.48

Rate for other Floors FF SF TF

Rate as worked out above 847.48 847.48 847.48
Hire charges for Access Scaffolding 10.78 10.78 10.78

Labour charges for scaffolding 84.68 121.18 157.72

MA @ 40% 33.87 48.47 63.09
Lift charges ( Page 131 of Std. Data ) 0.00 21.61 43.22

MA @ 40% 0.00 8.64 17.29

Rate per 1 sqm 976.81 1058.17 1139.58
Overheads & Contractors Profit 132.99 144.07 155.15
@13.615%
Rate per 1 sqm 1109.80 1202.24 1294.73

#REF! Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid
blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50
Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including
sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding
charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).
(BLD-CSTN-5-17)
Unit = 1 Cum
A.MATERIALS
No of blocks required for 110 Nos 30000.00 1000 Nos 3300.00
1 Cum of Masonry
Cement 24.00 Kgs 4220.00 1000 Kgs 101.28
Fine aggregate ( Sand ) 0.10 cu.m. 2176.00 1 cu.m. 217.60
B .LABOUR
Mason 1st class 0.42 Nos. 630.00 1 Each 264.60
Mason 2nd class 0.92 Nos. 565.00 1 Each 519.80
Man Mazdoor 0.70 Nos. 525.00 1 Each 367.50
Woman Mazdoor 2.10 Nos. 525.00 1 Each 1102.50
MA @ 40% 0.40 2254.40 901.76
water charges @ 1% 0.01 6775.04 67.75
Rate per 1 cum 6842.79

a) Rate for Foundation , Basement , Compound wall

Rate as above 1.00 cum 6842.79 1 cum 6842.79
Overheads & Contractors Profit 0.13615 6842.79 931.65
@13.615%
Rate per 1 cum 7774.44
 CIVIL DATA : Page-144

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

b) Superstructure :
Rate for other Floors FF SF TF
Rate as worked out above 6842.79 6842.79 6842.79
Hire charges for Access Scaffolding 47.91 47.91 47.91

Labour charges for scaffolding 376.36 538.58 700.98

MA @ 40% 150.54 215.43 280.39
Lift charges ( Page 131 of Std. Data ) 0.00 225.44 450.88

MA @ 40% 0.00 90.18 180.35

7417.61 7960.33 8503.31
Overheads & Contractors Profit 1009.91 1083.80 1157.73
@13.615%
Rate per 1 cum 8427.52 9044.13 9661.04

#REF! Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly
ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of
50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the
reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance
of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all
materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding
charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding
cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)
(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Fly ash lime solid blocks 247 Nos. 14000.00 1000 Nos. 3458.00
Cement 36.00 Kgs 4220.00 1000 Kgs 151.92
Fine aggregate ( Sand ) 0.10 cu.m. 2176.00 1 cu.m. 217.60
B.LABOUR :
1st class mason 0.60 Nos. 630.00 1 Each 378.00
2nd class mason 0.60 Nos. 565.00 1 Each 339.00
Mazdoor (Unskilled) 2.75 Nos. 525.00 1 Each 1443.75
MA @ 40% 0.40 2160.75 864.30
water charges @ 1% 0.01 6852.57 68.53
Rate per 10 sqm 6921.10
Rate per 1 sqm 692.11

Internal walls :
Rate for other Floors FF SF TF
Rate as worked out above 692.11 692.11 692.11
Hire charges for Access Scaffolding 10.78 10.78 10.78

Labour charges for scaffolding 84.68 121.18 157.72

MA @ 40% 33.87 48.47 63.09
Lift charges ( Page 131 of Std. Data ) 0.00 21.61 43.22

MA @ 40% 0.00 8.64 17.29

Rate per 1 sqm 821.44 902.80 984.21
Overheads & Contractors Profit 111.84 122.92 134.00
@13.615%
Rate per 1 sqm 933.28 1025.72 1118.21
 CIVIL DATA : Page-145

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

Steel work's
14 Providing High Yield Strength Deformed (HYSD)/TMT (Fe 500 grade as per IS 1786-1979) of
different diameters for RCC works , including labour charges for straightening, cutting, bending to
required sizes and shapes, placing in position with cover blocks of approved materials and size and
tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per
approved designs and drawings, including cost and conveyance of steel bars, including all wastages
such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire,
cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in
position, tying including sales and other taxes on all materials etc. ,and overheads & contractors
profit complete for finished item of work.( APSS No.126)

(BLD-CSTN-4.2)& Amendment in SoR 2011-12 page No. 392

Unit - 1 MT
a) Material
HYSD bars including 5% for overlaps 1.05 MT 63000.00 1 MT 66150.00
and wastage
Binding wire 6.00 Kgs 70.00 1 Kgs 420.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position

1st class Blacksmith / Bar bender 3.00 Nos. 750.00 1 Each 2250.00
2nd class Blacksmith / Bar bender 7.00 Nos. 590.00 1 Each 4130.00
Mazdoor(Unskilled) 10.00 Nos. 525.00 1 Each 5250.00
MA @ 40% 0.40 11630.00 4652.00
82852.00

Rate for other Floors FF

Rate as worked out above 82852.00
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
Rate per 1 MT 82852.00
Overheads & Contractors Profit 11280.30
@13.615%
Rate per 1 MT 94132.30
Rate per 1 Kg 94.13

8 Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for
RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing
in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18
SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and
conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost
and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting,
bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads &
contractors profit complete for finished item of work.( APSS No.126)

(BLD-CSTN-4.2)& Amendment in SoR 2011-12 page No. 392

Unit - 1 MT
a) Material
TMT bars including 5% for overlaps and 1.05 MT 63000.00 1 MT 66150.00
wastage
Binding wire 6.00 Kgs 70.00 1 Kgs 420.00
 CIVIL DATA : Page-146

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
b) Labour for cutting , bending , shifting to
site , tying and placing in position

1st class Blacksmith / Bar bender 3.00 Nos. 750.00 1 Each 2250.00
2nd class Blacksmith / Bar bender 7.00 Nos. 590.00 1 Each 4130.00

Mazdoor(Unskilled) 10.00 Nos. 525.00 1 Each 5250.00

MA @ 40% 0.40 11630.00 4652.00
82852.00

Rate for other Floors FF

Rate as worked out above 82852.00
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
Rate per 1 MT 82852.00
Overheads & Contractors Profit 11280.30
@13.615%
Rate per 1 MT 94132.30
Rate per 1 Kg 94.13

9 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour
charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks
of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for
reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars,
including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of
binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in
position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit
complete for finished item of work.( APSS No.126)
(BLD-CSTN-4.2)& Amendment in SoR 2011-12 page No. 392
Unit - 1 MT
a) Material
Mild steel bars including 5% for 1.05 MT 60000.00 1 MT 63000.00
overlaps and wastage
Binding wire 6.00 Kgs 70.00 1 Kgs 420.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position

1st class Blacksmith / Bar bender 3.00 Nos. 750.00 1 Each 2250.00
2nd class Blacksmith / Bar bender 7.00 Nos. 590.00 1 Each 4130.00

Mazdoor(Unskilled) 10.00 Nos. 525.00 1 Each 5250.00

MA @ 40% 0.40 11630.00 4652.00
79702.00

Rate for other Floors FF SF TF

Rate as worked out above 79702.00 79702.00 79702.00
Lift charges ( Page 131 of Std. Data ) 0.00 1163.00 2326.00

MA @ 40% 0.00 465.20 930.40

Rate per 1 MT 79702.00 81330.20 82958.40
Overheads & Contractors Profit 10851.43 11073.11 11294.79
@13.615%
Rate per 1 MT 90553.43 92403.31 94253.19
 CIVIL DATA : Page-147

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

Plastering work's
10 Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and
conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all
materials, and all operational, incidental charges on materials and including cost of all labour charges for
mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit
complete for finished item of work.(SS 901,903 & 904)
(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 4220.00 1000 Kgs 182.30
Fine aggregate ( Sand ) 0.15 cu.m. 2176.00 1 cu.m. 326.40
B.LABOUR :
1st Class Mason 0.45 Nos. 630.00 1 Each 283.50
2st Class Mason 1.05 Nos. 565.00 1 Each 593.25
Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each 1470.00
MA @ 40% 0.40 2346.75 938.70
water charges @ 1% 0.01 3794.15 37.94
Rate per 10 Sqm 3832.10
Rate per 1 Sqm 383.21

Rate for other Floors FF SF TF 4F

Rate as worked out above 383.21 383.21 383.21 383.21
Hire charges for Access Scaffolding 2.57 2.57 2.57 2.57

Labour charges for scaffolding 16.94 24.04 31.13 38.23

MA @ 40% 6.78 9.62 12.45 15.29
Lift charges ( Page 131 of Std. Data ) 0.00 23.47 46.94 70.40

MA @ 40% 0.00 9.39 18.78 28.16

Rate per 1 Sqm 409.50 452.30 495.08 537.86
Overheads & Contractors Profit 55.75 61.58 67.40 73.23
@13.615%
Rate per 1 Sqm 465.25 513.88 562.48 611.09

#REF! Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat
of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental
charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift
charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads &
contractors profit complete for finished item of work. (SS 901,903 & 904)

( BLD-CSTN-8-10)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 4220.00 1000 Kgs 111.41
Fine aggregate (Sand) 0.11 Cum 2176.00 1 Cum 239.36
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 4220.00 1000 Kgs 60.77
Fine aggregate (Sand) 0.04 Cum 2176.00 1 Cum 87.04
B.LABOUR :
1st Class Mason 0.63 Nos. 630.00 1 Each 396.90
2nd Class Mason 1.47 Nos. 565.00 1 Each 830.55
 CIVIL DATA : Page-148

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Mazdoor (Unskilled) 3.90 Nos. 525.00 1 Each 2047.50
MA @ 40% 0.40 3274.95 1309.98
water charges @ 1% 0.01 5083.51 50.84
Rate per 10 Sqm 5134.34
Rate per 1 Sqm 513.43

a Up to basement
Rate as worked out above 1.00 Sqm 513.43 1 Sqm 513.43
Overheads & Contractors Profit 0.13615 513.43 69.90
@13.615%
Rate per 1 Sqm 583.33

Walls in superstructure :
Rate for other Floors FF
Rate as worked out above 513.43
Hire charges for Access Scaffolding 1.08

Labour charges for scaffolding 8.47

MA @ 40% 3.39
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
Rate per 1 Sqm 526.37
Overheads & Contractors Profit 71.67
@13.615%
Rate per 1 Sqm 598.04

#REF! Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for
finished item of work.(SS 901,903 & 904)

(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 4220.00 1000 Kgs 182.30
Fine aggregate ( Sand ) 0.15 cu.m. 2176.00 1 cu.m. 326.40
B.LABOUR :
1st Class Mason 0.45 Nos. 630.00 1 Each 283.50
2st Class Mason 1.05 Nos. 565.00 1 Each 593.25
Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each 1470.00
MA @ 40% 0.40 2346.75 938.70
water charges @ 1% 0.01 3794.15 37.94
Rate per 10 Sqm 3832.10
Rate per 1 Sqm 383.21

a) for basement :
Rate per 1 Sqm 1.00 sqm 383.21 1 sqm 383.21
Overheads & Contractors Profit 0.13615 383.21 52.17
@13.615%
Rate per 1 Sqm 435.38

b) Walls in superstructure :
Rate for other Floors FF
Rate as worked out above 383.21
 CIVIL DATA : Page-149

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Hire charges for Access Scaffolding 1.08
Labour charges for scaffolding 8.47
MA @ 40% 3.39
Lift charges ( Page 131 of Std. Data ) 0.00
MA @ 40% 0.00
396.15
Overheads & Contractors Profit 53.94
@13.615%
Rate per 1 Sqm 450.09

#REF! Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top
coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental
charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift
charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors
profit complete for finished item of work .(SS 901,903 & 904)
(BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick

Cement 43.20 Kgs 4220.00 1000 Kgs 182.30

Fine aggregate (Sand) 0.18 Cum 2176.00 1 Cum 391.68
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 4220.00 1000 Kgs 60.77
Fine aggregate (Sand) 0.04 Cum 2176.00 1 Cum 87.04
B.LABOUR :
1st Class Mason 0.63 Nos. 630.00 1 Each 396.90
2nd Class Mason 1.47 Nos. 565.00 1 Each 830.55
Mazdoor (Unskilled) 3.90 Nos. 525.00 1 Each 2047.50
MA @ 40% 0.40 3274.95 1309.98
water charges @ 1% 0.01 5306.72 53.07
Rate per 10 Sqm 5359.79
Rate per 1 Sqm 535.98

a) for basement :
Rate per 1 Sqm 1.00 sqm 535.98 1 sqm 535.98
Overheads & Contractors Profit 0.13615 535.98 72.97
@13.615%
Rate per 1 Sqm 608.95

Walls in superstructure :
Rate for other Floors FF SF TF
Rate as worked out above 535.98 535.98 535.98
Hire charges for Access Scaffolding 1.08 1.08 1.08

Labour charges for scaffolding 8.47 12.12 15.77

MA @ 40% 3.39 4.85 6.31
Lift charges ( Page 131 of Std. Data ) 0.00 32.75 65.50

MA @ 40% 0.00 13.10 26.20

548.92 599.88 650.84
Overheads & Contractors Profit 74.74 81.67 88.61
@13.615%
Rate per 1 Sqm 623.66 681.55 739.45
 CIVIL DATA : Page-150

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for
finished item of work .(SS 901,903 & 904)
(BLD-CSTN-8-8)
Unit : 10 sqm
A.MATERIALS :
Cement 60.48 Kgs 4220.00 1000 Kgs 255.23
Fine aggregate (Sand) 0.21 Cum 2176.00 1 Cum 456.96
B.LABOUR :
2nd Class Mason 0.94 Nos. 565.00 1 Each 531.10
Mazdoor (Unskilled) 1.60 Nos. 525.00 1 Each 840.00
MA @ 40% 0.40 1371.10 548.44
water charges @ 1% 0.01 2631.73 26.32
Rate per 10 Sqm 2658.04
Rate per 1 Sqm 265.80

a) for basement :
Rate per 1 Sqm 1.00 sqm 265.80 1 sqm 265.80
Overheads & Contractors Profit 0.13615 265.80 36.19
@13.615%
Rate per 1 Sqm 301.99
Say

b) Walls in superstructure :
Rate for other Floors FF SF TF
Rate as worked out above 265.80 265.80 265.80
Hire charges for Access Scaffolding 1.08 1.08 1.08

Labour charges for scaffolding 8.47 12.12 15.77

MA @ 40% 3.39 4.85 6.31
Lift charges ( Page 131 of Std. Data ) 0.00 13.71 27.42

MA @ 40% 0.00 5.48 10.97

278.74 303.04 327.35
Overheads & Contractors Profit 37.95 41.26 44.57
@13.615%
Rate per 1 Sqm 316.69 344.30 371.92

#REF! Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using
screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-
2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of
cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread
lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand,
water proofing compound, water etc., to site, including sales & other taxes on all materials and operational,
incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining,
curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 901 & 903).
(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement 100.80 Kgs 4220.00 1000 Kgs 425.38
Fine aggregate (Sand) 0.21 Cum 2176.00 1 Cum 456.96
Integral cement waterproofing liquid 0.40 Ltrs 129.00 1.00 Ltrs 51.60
 CIVIL DATA : Page-151

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
B.LABOUR :
1st Class Mason 0.66 Nos. 630.00 1 Each 415.80
2nd Class Mason 1.54 Nos. 565.00 1 Each 870.10
Mazdoor (Unskilled) 3.70 Nos. 525.00 1 Each 1942.50
MA @ 40% 0.40 3228.40 1291.36
water charges @ 1% 0.01 5453.70 54.54
Rate per 10 Sqm 5508.23

Rate for other Floors FF SF TF

Rate as worked out above 5508.23 5508.23 5508.23
Lift charges ( Page 131 of Std. Data ) 0.00 322.84 645.68

MA @ 40% 0.00 129.14 258.27

5508.23 5960.21 6412.18
Overheads & Contractors Profit 749.95 811.48 873.02
@13.615% 6258.18 6771.69 7285.20
Rate per 1 Sqm 625.82 677.17 728.52

#REF! Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall, sump bottom slab,
in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 12mm
thick mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed
manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is
green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of
45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water
proofing compound, water etc., to site, including sales & other taxes on all materials and operational,
incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining,
curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 901 & 903).
(BLD-CSTN-8-2)
A.MATERIALS :
Cement 72.00 Kgs 4220.00 1000 Kgs 303.84
Fine aggregate (Sand) 0.15 Cum 2176.00 1 Cum 326.40
Integral cement waterproofing liquid 0.29 Ltrs 129.00 1.00 Ltrs 37.41

B.LABOUR :
1st Class Mason 0.45 Nos. 630.00 1 Each 283.50
2st Class Mason 1.05 Nos. 565.00 1 Each 593.25
Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each 1470.00
MA @ 40% 0.40 2346.75 938.70
water charges @ 1% 0.01 3953.10 39.53
Rate per 10 Sqm 3992.63

Rate for other Floors FF SF TF

Rate as worked out above 3992.63 3992.63 3992.63
Lift charges ( Page 131 of Std. Data ) 0.00 234.68 469.35

MA @ 40% 0.00 93.87 187.74

3992.63 4321.18 4649.72
Overheads & Contractors Profit 543.60 588.33 633.06
@13.615%
Rate per 10 Sqm 4536.23 4909.51 5282.78
Rate per 1 Sqm 453.62 490.95 528.28
 CIVIL DATA : Page-152

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! RCM facia 50mm thick in CM(1:3) using screened sand for drop walls, fins with rabbit wire mesh & nominal
reinforcement as directed by Engineer - In - Charge with dubara sponge finishing, including cost and
conveyance of all materials to site, sales & other taxes on all materials,operationals &incidental, cost and
conveyance of cement, wire mesh, water to work site, centring, scaffolding and form work, lift charges etc.,
and overheads & contractors profit complete for finished item of work but excluding cost of steel and its
fabrication charges for finished item of work(APSS NO.403&903)

(BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 21.00 1 sqm 279.30
Cement for base coat and plastering 240.00 Kgs 4220.00 1000 Kgs 1012.80

Cement for lumps 50.00 Kgs 4220.00 1000 Kgs 211.00

Fine aggregate (Sand) 0.50 cu.m. 2176.00 1 cu.m. 1088.00
Excluding HYSD steel/mild steel &
binding wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 630.00 1 Each 5040.00
Operator concrete mixer 1.00 Nos. 615.00 1 Each 615.00
Mazdoor (Unskilled) 10.00 Nos. 525.00 1 Each 5250.00
MA @ 40% 0.40 10905.00 4362.00
C)Machinery :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 2.00 hours 188.10 1 hours 376.20
cum)capacity
Crew charges 2.00 hours 306.80 1 hours 613.60
Add MA on crew charges 0.40 306.80 245.44
water charges @ 1% 0.01 19093.34 190.93
Rate per 10 Sqm 19284.27
Rate per 1 Sqm 1928.43

Rate for other Floors FF SF TF

Rate as worked out above 1928.43 1928.43 1928.43
Hire charges for Access Scaffolding 1.08 2.16 3.24

Labour charges for scaffolding 8.47 12.12 15.77

MA @ 40% 3.39 4.85 6.31
Lift charges ( Page 131 of Std. Data ) 0.00 109.05 218.10

MA @ 40% 0.00 43.62 87.24

1941.37 2100.23 2259.09
Overheads & Contractors Profit 264.32 285.95 307.58
@13.615%
Rate per 1 Sqm 2205.69 2386.18 2566.67
Flooring
#REF! Flooring with red cement plaster in cm 1:3 with required slopes and neat float finishing by using red oxide at
10 kg. for 10.00 sqm , finished smooth with a floating coat of neat red oxide mixed cement and thread lining
at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, red
oxide, water etc., to site, including sales & other taxes on all materials and operational, incidental, and labour
charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding
off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-8-3)BLD CSTN 9-16 (114) at page 56
Unit : 10 sqm
A.MATERIALS :
 CIVIL DATA : Page-153

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Cement 72.00 Kgs 4220.00 1000 Kgs 303.84
Fine aggregate ( Sand ) 0.15 cu.m. 2176.00 1 cu.m. 326.40
Redoxide SoR 372 at 34 10.00 kgs. 145.00 1.00 kgs. 1450.00
B.LABOUR :
1st Class Mason 0.45 Nos. 630.00 1 Each 283.50
2st Class Mason 1.05 Nos. 565.00 1 Each 593.25
Mazdoor (Unskilled) 2.80 Nos. 525.00 1 Each 1470.00
Masons for polishing 1.10 Nos. 630.00 1 Each 693.00
MA @ 40% 0.40 3039.75 1215.90
water charges @ 1% 0.01 6335.89 63.36
Rate per 10 Sqm 6399.25
Rate per 1 Sqm 639.92

a) for basement :
Rate per 1 Sqm 1.00 sqm 639.92 1 sqm 639.92
Overheads & Contractors Profit 0.13615 639.92 87.13
@13.615%

Rate per 1 Sqm 727.05

#REF! Flooring with KHONDALITE STONE slabs minimum of 75 mm thick set over a base coat of CM (1:8) , 12mm
thick using screened sand over already laid CC bed including neat cement slurry of honey like consistency
spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all
materials like cement, sand, water, flooring stones etc. complete including sales & other taxes on all
materials including all labour charges like dressing of flooring stones to the required size, mixing of cement
mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit
complete for finished item of work. (APSS No.703 & 701)
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Qty KHONDALITE STONE slabs minimum of 10.5 Sqm 860.00 1 Sqm 9030.00
75 mm thick
Cement for CM (1:8) proportion for 21.60 Kgs 4220.00 1000 Kgs 91.15
base coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
Cement for pointing 20.00 Kgs 4220.00 1000 Kgs 84.40
Sand for CM(1:8) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.10 Nos 630.00 1 Each 1953.00
Mason 2nd class 1.10 Nos 565.00 1 Each 621.50
Mazdoor(un skilled) 0.86 Nos 525.00 1 Each 451.50
MA @ 40% 0.40 3026.00 1210.40
Add water charges 1% 0.01 13842.33 138.42
Rate for 10 sqm 13980.76

Rate for other floors FF

Rate as worked out above 13980.76
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
13980.76
Overheads & Contractors Profit 1903.48
@13.615%
Rate per 10 Sqm 15884.24
Rate per 1 Sqm 1588.42
 CIVIL DATA : Page-154

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! Flooring with polished Shahabad / Tandur stone slabs of 15mm to 18mm thick set over a base coat of CM
(1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry
of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including
cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including sales &
other taxes on all materials including all labour charges like dressing of flooring stones to the required size,
mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads &
contractors profit complete for finished item of work. (APSS No.703 & 701)

(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished Shahabad stone 15 to 18mm 11.00 Sqm 1900.00 10 Sqm 2090.00
thick
Cement for CM (1:8) proportion for 21.60 Kgs 4220.00 1000 Kgs 91.15
base coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
Cement for pointing 20.00 Kgs 4220.00 1000 Kgs 84.40
Sand for CM(1:8) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.10 Nos 630.00 1 Each 1953.00
Mason 2nd class 1.10 Nos 565.00 1 Each 621.50
Mazdoor(un skilled) 0.86 Nos 525.00 1 Each 451.50
MA @ 40% 0.40 3026.00 1210.40
Add water charges 1% 0.01 6902.33 69.02
Rate for 10 sqm 6971.36

Rate for other floors FF

Rate as worked out above 6971.36
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
6971.36
Overheads & Contractors Profit 949.15
@13.615%
Rate per 10 Sqm 7920.51
Rate per 1 Sqm 792.05

#REF! Flooring with Rough Shahabad / Tandur stone slabs of 40 mm thick set over base coat of cement mortar
(1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly
filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete,
including labour charges for dressing of flooring stones etc., complete for finished item of work,. (APSS
No.703 & 701)

(BLD-CSTN-9-2)
Unit = 10 sqm.
A. MATERIALS:
Rough Shahabad / Tandur stone slabs of 10.5 Sqm 1500.00 10 Sqm 1575.00
40 mm thick
Cement for CM (1:8) proportion for 21.60 Kgs 4220.00 1000 Kgs 91.15
base coat
Cement for CM 1:3 proportion for 9.60 Kgs 4220.00 1000 Kgs 40.51
pointing
 CIVIL DATA : Page-155

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Sand for CM (1:8) proportion 0.12 Kgs 2176.00 1 Cum 261.12
Sand for CM (1:3) proportion 0.02 Cum 2176.00 1 Cum 43.52
B .LABOUR
Mason 1st class 0.96 Nos 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos 565.00 1 Each 1265.60
Mazdoor(un skilled) 3.30 Nos 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 7055.36 70.55
Rate for 10 sqm 7125.92

Rate for other floors FF

Rate as worked out above 7125.92
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
7125.92
Overheads & Contractors Profit 970.19
Rate per 10 Sqm
@13.615% 8096.11
Rate per 1 Sqm 809.61

#REF! Flooring with (latoth) leather finish Tandur stone slabs of 18 to 22 mm thickset over a base coat of CM
(1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry
of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including
cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including sales &
other taxes on all materials including all labour charges like dressing of flooring stones to the required size,
mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads &
contractors profit complete for finished item of work. (APSS No.703 & 701)

(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
As per Latoth finish Shahabad stone 18 to 22 11.00 Sqm 591.25 1 Sqm 6503.75
Quotation mm thick
Cement for CM (1:8) proportion for base 21.60 Kgs 4220.00 1000 Kgs 91.15
coat

Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26

Cement for pointing 20.00 Kgs 4220.00 1000 Kgs 84.40
Sand for CM(1:8) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.10 Nos 465.00 1 Each 1441.50
Mason 2nd class 1.10 Nos 420.00 1 Each 462.00
Mazdoor(un skilled) 0.86 Nos 370.00 1 Each 318.20
MA @ 20% 0.20 2221.70 444.34
Add water charges 1% 0.01 9745.72 97.46
Rate per 10 Sqm 9843.18
Rate per 1 Sqm 984.32
 CIVIL DATA : Page-156

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! Flooring with Polished black Kadapa slabs minimum of 15mm thick of size 0.457m x 0.457m set over a base
coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full
depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete
including sales & other taxes on all materials including all labour charges like dressing of flooring stones to
the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and
overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished black Kadapa slabs minimum 11.00 Sqm 1750.00 10 Sqm 1925.00
of 15mm thick

Cement for CM (1:8) proportion for 21.60 Kgs 4220.00 1000 Kgs 91.15
base coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
Cement for pointing 20.00 Kgs 4220.00 1000 Kgs 84.40
Sand for CM(1:8) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.10 Nos 630.00 1 Each 1953.00
Mason 2nd class 1.10 Nos 565.00 1 Each 621.50
Mazdoor(un skilled) 0.86 Nos 525.00 1 Each 451.50
MA @ 40% 0.40 3026.00 1210.40
Add water charges 1% 0.01 6737.33 67.37
Rate for 10 sqm 6804.71

Rate for other floors FF

Rate as worked out above 6804.71
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
6804.71
Overheads & Contractors Profit 926.46
Rate per 10 Sqm
@13.615% 7731.17
Rate per 1 Sqm 773.12

#REF! Flooring with Rough black Kadapa slabs minimum of 50 mm thick of size 0.457m x 0.457m set over base
coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with
cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand,
and water etc., complete, including labour charges for dressing of flooring stones etc., complete for finished
item of work,. (APSS No.703 & 701)

(BLD-CSTN-9-2)
Unit = 10 sqm.
A. MATERIALS:
Rough black Kadapa slabs minimum of 10.5 Sqm 1450.00 10 Sqm 1522.50
50 mm thick

Cement for CM (1:8) proportion for 21.60 Kgs 4220.00 1000 Kgs 91.15
base coat
 CIVIL DATA : Page-157

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Cement for CM 1:3 proportion for 9.60 Kgs 4220.00 1000 Kgs 40.51
pointing
Sand for CM (1:8) proportion 0.12 Kgs 2176.00 1 Cum 261.12
Sand for CM (1:3) proportion 0.02 Cum 2176.00 1 Cum 43.52
B .LABOUR
Mason 1st class 0.96 Nos 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos 565.00 1 Each 1265.60
Mazdoor(un skilled) 3.30 Nos 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 7002.86 70.03
Rate for 10 sqm 7072.89

Rate for other floors FF

Rate as worked out above 7072.89
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
7072.89
Overheads & Contractors Profit 962.97
Rate per 10 Sqm
@13.615% 8035.86
Rate per 1 Sqm 803.59

#REF! Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm
1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and
designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using
screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with
pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc.,
and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x 10.50 Sqm 370.00 1 Sqm 3885.00
300mm)
Cement for CM(1:8) proportion for base 21.60 Kgs 4220.00 1000 Kgs 91.15
coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White Cement 2.00 Kgs 31.00 1 Kg 62.00
Sand for CM(1:8) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 0.96 Nos 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos 565.00 1 Each 1265.60
Mazdoor(un skilled) 3.30 Nos 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 9482.59 94.83
Rate for 10sqm 9577.42

Rate for other Floors FF SF

Rate as worked out above 9577.42 9577.42
Lift charges ( Page 131 of Std. Data ) 0.00 360.29

MA @ 40% 0.00 144.12

 CIVIL DATA : Page-158

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
9577.42 10081.82
Overheads & Contractors Profit 1303.97 1372.64
@13.615%
Rate per 10 Sqm 10881.39 11454.46
Rate per 1 Sqm 1088.14 1145.45

#REF! Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and
thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any
colour and finish in all shades and designs with borders and design as per the approved flooring pattern as
directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM
(1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement
slurry of honey like consistency spread @ 3.3 kgs per Sqm. and jointed neatly with white cement paste to
full depth mixed with pigment of matching shade including cost and conveyance of all materials like
cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat
and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the
Engineer- in-charge etc., and overheads & contractors profit complete for finished item of work. (APSS
No.701 & 707)

(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8 to 10mm thick of size 10.50 Sqm 425.00 1 Sqm 4462.50
600mm x 600mm
Cement for CM(1:8)proportion for base 21.60 Kgs 4220.00 1000 Kgs 91.15
coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White Cement 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:8) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 0.96 Nos 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos 565.00 1 Each 1265.60
Mazdoor(un skilled) 3.30 Nos 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 10184.09 101.84
Rate for 10sqm 10285.93

Rate for other Floors FF SF

Rate as worked out above 10285.93 10285.93
Lift charges ( Page 131 of Std. Data ) 0.00 360.29

MA @ 40% 0.00 144.12

10285.93 10790.34
Overheads & Contractors Profit 1400.43 1469.10
@13.615%
Rate per 10 Sqm 11686.36 12259.44
Rate per 1 Sqm 1168.64 1225.94
 CIVIL DATA : Page-159

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! Flooring with granite stone tiles 8mm thick (mirror polished of all shades) of 1st quality and of size as
approved by Engineer-in-charge with borders and design as per the approved flooring pattern as directed by
the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop.
12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of
honey like consistency spread @ 3.3 kgs per Sqm. and jointed neatly with white cement paste to full depth
mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand,
water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour
charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge
etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

(BLD-CSTN-9-9)
Unit = 10 sqm.
A. MATERIALS:
Granite stone tiles 8mm thick (mirror 10.50 Sqm 1100.00 1 Sqm 11550.00
polished of all shades)
Cement for CM(1:8) for base coat 21.60 Kgs 4220.00 1000 Kgs 91.15
Cement for slurry 33.00 Kgs 4220.00 1000 Kg 139.26
White Cement 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:8) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 0.96 Nos 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos 565.00 1 Each 1265.60
Mazdoor(un skilled) 3.30 Nos 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 17271.59 172.72
Rate for 10 sqm 17444.31

Rate for other Floors FF SF

Rate as worked out above 17444.31 17444.31
Lift charges ( Page 131 of Std. Data ) 0.00 360.29

MA @ 40% 0.00 144.12

17444.31 17948.71
Overheads & Contractors Profit 2375.04 2443.72
@13.615%
Rate per 10 Sqm 19819.35 20392.43
Rate per 1 Sqm 1981.93 2039.24

19 Flooring with 16 to 18mm thick high polished/leather finished granite stone slabs other than black and
regular colours (i.e. of shades like paradise / bala flower / copper silk / laka red / lavender blue) with borders
and design ,finished as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts
set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC
roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational,
incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and
overheads & contractors profit complete for finished item of work (S.S.701 & special)

(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished/leather finished slabs 10.50 Sqm 2500.00 1 Sqm 26250.00
other than black 16 to 18mm thick
 CIVIL DATA : Page-160

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Cement for CM(1:8) for base coat 36.00 Kgs 4220.00 1000 Kgs 151.92
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:8) 0.20 Cum 2176.00 1 Cum 435.20
B .LABOUR
Mason 1st class 3.00 Nos 630.00 1 Each 1890.00
Mason 2nd class 1.00 Nos 565.00 1 Each 565.00
Mazdoor(un skilled) 8.00 Nos 525.00 1 Each 4200.00
MA @ 40% 0.40 6655.00 2662.00
Add water charges 1% 0.01 36479.38 364.79
Rate for 10sqm 36844.17

Rate for other Floors FF

Rate as worked out above 36844.17
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
36844.17
Overheads & Contractors Profit 5016.33
@13.615%
Rate per 10 Sqm 41860.50
Rate per 1 Sqm 4186.05

20 Flooring with 16 to 18mm thick Antique Finished granite slabs other than black and regular colours (i.e. of
shades like paradise / bala flower / copper silk / laka red / lavender blue) with borders and design as per the
pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement
mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey
cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste
mixed with pigment of matching shade to full depth including cost and conveyance of all materials like
cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges,
polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit
complete for finished item of work (S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
As per Quotation Antique Finished granite slabs other 10.50 Sqm 3040.00 1 Sqm 31920.00
than black 16 to 18mm thick
Cement for CM(1:8) for base coat 36.00 Kgs 4220.00 1000 Kgs 151.92
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:8) 0.20 Cum 2176.00 1 Cum 435.20
B .LABOUR
Mason 1st class 3.00 Nos 630.00 1 Each 1890.00
Mason 2nd class 1.00 Nos 565.00 1 Each 565.00
Mazdoor(un skilled) 8.00 Nos 525.00 1 Each 4200.00
MA @ 40% 0.40 6655.00 2662.00
Add water charges 1% 0.01 42149.38 421.49
Rate for 10sqm 42570.87

Rate for other Floors FF SF

Rate as worked out above 42570.87 42570.87
Lift charges ( Page 131 of Std. Data ) 0.00 665.50

MA @ 40% 0.00 266.20

 CIVIL DATA : Page-161

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
42570.87 43502.57
Overheads & Contractors Profit 5796.02 5922.88
@13.615%
Rate per 10 Sqm 48366.89 49425.45
Rate per 1 Sqm 4836.69 4942.55

21 Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick
using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like
consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge ,
polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit
complete for finished item of work for platforms (S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to 10.50 Sqm 2100.00 1 Sqm 22050.00
18mm thick
Cement for CM(1:8) for base coat 36.00 Kgs 4220.00 1000 Kgs 151.92
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:8) 0.20 Cum 2176.00 1 Cum 435.20
B .LABOUR
Mason 1st class 3.00 Nos 630.00 1 Each 1890.00
Mason 2nd class 1.00 Nos 565.00 1 Each 565.00
Mazdoor(un skilled) 8.00 Nos 525.00 1 Each 4200.00
MA @ 40% 0.40 6655.00 2662.00
Machine cutting charges 16.67 RM 19.00 1 RM 316.73
Half rounding the edges 16.67 RM 350.00 1 RM 5834.50
MA @ 40% 0.40 2460.49 984.20
Add water charges 1% 0.01 39414.81 394.15
Rate for 10 sqm 39808.95

Rate for other Floors FF SF

Rate as worked out above 39808.95 39808.95
Lift charges ( Page 131 of Std. Data ) 0.00 665.50

MA @ 40% 0.00 266.20

39808.95 40740.65
Overheads & Contractors Profit 5419.99 5546.84
@13.615%
Rate per 10 Sqm 45228.94 46287.49
Rate per 1 Sqm 4522.89 4628.75

22 Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine
crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not
exceeding 1.50 m x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes
and thread lining including cost of all materials like cement, metal sand and water and overheads &
contractors profit complete for finished item of work. (APSS No.701 & 710)
(BLD-CSTN-9-13)
Unit : 10sqm
 CIVIL DATA : Page-162

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
A.MATERIALS :
6mm to 12mm HBG Metal 0.17 Cum 1548.20 1 Cum 263.19
Cement 120.00 Kgs 4220.00 1000 Kgs 506.40
Sand 0.085 Cum 2081.00 1 Cum 176.89
Add for glass strips 10.00 Sqm 12.00 1 Sqm 120.00
B. LABOUR
Mason 1st class 1.25 Nos. 630.00 1 Each 787.50
Mason 2nd class 0.06 Nos. 565.00 1 Each 33.90
Mazdoor (unskilled) 3.00 Nos. 525.00 1 Each 1575.00
MA @ 40% 0.40 2396.40 958.56
Add water charges 1% 0.01 4421.44 44.21
Rate per 10 Sqm 4465.65

Rate for other Floors FF SF

Rate as worked out above 4465.65 4465.65
Lift charges ( Page 131 of Std. Data ) 0.00 239.64

MA @ 40% 0.00 95.86

4465.65 4801.15
Overheads & Contractors Profit 608.00 653.68
@13.615%
Rate per 10 Sqm 5073.65 5454.83
Rate per 1 Sqm 507.37 545.48

23 Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement,
pigments of size 300mm x 300mm and thickness 25mm of any shade as approved by Engineer - In - Charge
set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed already laid or RCC
roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with
neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all
materials like cement, sand, water and tiles etc., and overheads & contractors profit complete for finished
item of work.
(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequered tiles 25mm thick 10.50 sqm 325.00 1 sqm 3412.50

Cement for CM(1:6) proportion for base 28.80 Kgs 4220.00 1000 Kgs 121.54
coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 2.00 Kgs 31.00 1.00 Kgs 62.00

Sand for CM(1:6) proportion 0.12 Cum 2176.00 1 Cum 261.12

B. LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos. 565.00 1 Each 1265.60
Mazdoor (unskilled) 3.30 Nos. 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 9040.48 90.40
Rate per 10 Sqm 9130.88

Rate for other Floors FF SF

Rate as worked out above 9130.88 9130.88
 CIVIL DATA : Page-163

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Lift charges ( Page 131 of Std. Data ) 0.00 360.29

MA @ 40% 0.00 144.12

9130.88 9635.29
Overheads & Contractors Profit 1243.17 1311.84
@13.615%
Rate per 10 Sqm 10374.05 10947.13
Rate per 1 Sqm 1037.41 1094.71

24 Brick Flooring with common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or
traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm.
approved by Engineer - In - Charge set over base coat of cement mortar (1:3), 12 mm thick using screened
sand over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread
@ 3.3 kgs per sqm and including cost and conveyance of all materials like cement, sand, water and tiles etc.,
and overheads & contractors profit complete for finished item of work.

(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Common burnt clay bricks 23x11x7cms 300.00 Nos 8058.30 1000 Nos 2417.49

Cement for CM(1:3) proportion for base 72.00 Kgs 4220.00 1000 Kgs 303.84
coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
Sand for CM(1:3) proportion 0.15 Cum 2176.00 1 Cum 326.40
B. LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos. 565.00 1 Each 1265.60
Mazdoor (unskilled) 3.30 Nos. 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 6789.89 67.90
Rate per 10 Sqm 8298.95

Rate for other Floors FF SF

Rate as worked out above 9130.88 9130.88
Lift charges ( Page 131 of Std. Data ) 0.00 360.29

MA @ 40% 0.00 144.12

9130.88 9635.29
Overheads & Contractors Profit 1243.17 1311.84
@13.615%
Rate per 10 Sqm 10374.05 10947.13
Rate per 1 Sqm 1037.41 1094.71

Treads and risers

25 Providing polished Shahabad / Tandur stone slabs of 15mm to 18mm thick in single piece as specified set
over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat
cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones
etc. complete including sales & other taxes on all materials including all labour charges like dressing of
flooring stones to the required size, flat nosing the edges, mixing of cement mortar, laying, lift charges , cost
of base coat, water charges etc., and overheads & contractors profit complete for finished item of work for
treads and risers. (APSS No.703 & 701)
a) Treads of 0.30m wide :
 CIVIL DATA : Page-164

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished Shahabad stone 15 to 18mm 11.00 Sqm 1900.00 10 Sqm 2090.00
thick
Cement for CM (1:5) proportion for 34.56 Kgs 4220.00 1000 Kgs 145.84
base coat
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
Cement for jointing 20.00 Kgs 4220.00 1000 Kgs 84.40
Sand for CM(1:5) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.10 Nos 630.00 1 Each 1953.00
Mason 2nd class 1.10 Nos 565.00 1 Each 621.50
Mazdoor(un skilled) 0.86 Nos 525.00 1 Each 451.50
MA @ 40% 0.40 3026.00 1210.40
Flat nosing the edges 33.33 RM 55.00 1 RM 1833.15
MA @ 40% 0.40 733.26 293.30
Add water charges 1% 0.01 9083.48 90.83
Rate for 10sqm 9174.31

Rate for other floors FF SF

Rate as worked out above 9174.31 9174.31
Lift charges ( Page 131 of Std. Data ) 0.00 302.60

MA @ 40% 0.00 121.04

9174.31 9597.95
Overheads & Contractors Profit 1249.08 1306.76
@13.615%
Rate per 10 Sqm 10423.39 10904.71
Rate per 1 Sqm 1042.34 1090.47

b) Risers of 0.15m height :

(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of Shahabad stone slabs 11.00 sqm 1900.00 10 sqm 2090.00
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
B.LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos. 565.00 1 Each 1265.60
Mazdoor(unskilled) 3.10 Nos. 525.00 1 Each 1627.50
MA @ 40% 0.40 3497.90 1399.16
Add water charges 1% 0.01 7533.28 75.33
Rate for 10 sqm 7608.62

Rate for other Floors FF SF

Rate as worked out above 7608.62 7608.62
Lift charges ( Page 131 of Std. Data ) 0.00 349.79

MA @ 40% 0.00 139.92

7608.62 8098.32
 CIVIL DATA : Page-165

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Overheads & Contractors Profit 1035.91 1102.59
@13.615%
Rate per 10 Sqm 8644.53 9200.91
Rate per 1 Sqm 864.45 920.09

26 Providing Polished black Kadapa slabs minimum of 15mm thick in single piece as specified set over a base
coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full
depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete
including sales & other taxes on all materials including all labour charges like dressing of flooring stones to
the required size, flat nosing the edges, mixing of cement mortar, laying, lift charges , cost of base coat, water
charges etc., and overheads & contractors profit complete for finished item of work for treads and risers.
(APSS No.703 & 701)
a) Treads of 0.30m wide : 0.30
(BLD-CSTN-9-1)
Unit = 10 sqm. 10
A. MATERIALS:
Polished black Kadapa slabs minimum 11.00 Sqm 2625.00 10 Sqm 2887.50
of 15mm thick
Cement for CM (1:5) proportion for 34.56 Kgs 4220.00 1000 Kgs 145.84
base
Cementcoatfor slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
Cement for jointing 20.00 Kgs 4220.00 1000 Kgs 84.40
Sand for CM(1:5) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.10 Nos 630.00 1 Each 1953.00
Mason 2nd class 1.10 Nos 565.00 1 Each 621.50
Mazdoor(un skilled) 0.86 Nos 525.00 1 Each 451.50
MA @ 40% 0.40 3026.00 1210.40
Flat nosing the edges 33.33 RM 55.00 1 RM 1833.33
MA @ 40% 0.40 733.33 293.33
Add water charges 1% 0.01 9881.19 98.81
Rate for 10sqm 9980.00

Rate for other floors FF SF

Rate as worked out above 9980.00 9980.00
Lift charges ( Page 131 of Std. Data ) 0.00 302.60

MA @ 40% 0.00 121.04

9980.00 10403.64
Overheads & Contractors Profit 1358.78 1416.46
@13.615%
Rate per 10 Sqm 11338.78 11820.10
Rate per 1 Sqm 1133.88 1182.01

b) Risers of 0.15m height :

(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of Kadapa stone slabs 11.00 sqm 2625.00 10 sqm 2887.50
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
B.LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos. 565.00 1 Each 1265.60
 CIVIL DATA : Page-166

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Mazdoor(unskilled) 3.10 Nos. 525.00 1 Each 1627.50
MA @ 40% 0.40 3497.90 1399.16
Add water charges 1% 0.01 8330.78 83.31
Rate for 10 sqm 8414.09

Rate for other Floors FF SF

Rate as worked out above 8414.09 8414.09
Lift charges ( Page 131 of Std. Data ) 0.00 349.79

MA @ 40% 0.00 139.92

8414.09 8903.80
Overheads & Contractors Profit 1145.58 1212.25
@13.615%
Rate per 10 Sqm 9559.67 10116.05
Rate per 1 Sqm 955.97 1011.60

#REF! Providing Coping with 16 to 18mm thick High Polished granite up to 8'-00 (2.43 M) other than black and
regular colours with borders and design as per the pattern approved by the Engineer-in-Charge of length not
less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per
sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth
including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and
all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all
other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item
of work for Coping 0.50 m wide (S.S.701 & special)

a) Coping wide : 0.5 m

(BLD-CSTN-9-7)
Unit 10 sqm.
A. MATERIALS:
High Polished Granite 16 to 18 mm 10.50 Sqm 2500.00 1 Sqm 26250.00
thick
Cement for CM(1:5) for base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:5) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.00 Nos 630.00 1 Each 1890.00
Mason 2nd class 1.00 Nos 565.00 1 Each 565.00
Mazdoor(un skilled) 8.00 Nos 525.00 1 Each 4200.00
MA @ 40% 0.40 6655.00 2662.00
Machine cutting charges 20.00 RM 19.00 1 RM 380.00
Half rounding the edges 20.00 RM 350.00 1 RM 7000.00
MA @ 40% 0.40 2952.00 1180.80
Add water charges 1% 0.01 44860.02 448.60
Rate for 10sqm 45308.62

Rate for other Floors FF

Rate as worked out above 45308.62
Lift charges ( Page 131 of Std. Data ) 0.00
 CIVIL DATA : Page-167

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.00

45308.62
Overheads & Contractors Profit 6168.77
@13.615%
Rate per 10 Sqm 51477.39
Rate per 1 Sqm 5147.74

#REF! Providing Treads with 16 to 18mm thick High Polished granite up to 8'-00 (2.43 M) other than black and
regular colours with borders and design as per the pattern approved by the Engineer-in-Charge of length not
less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed
already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per
sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth
including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and
all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all
other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item
of work for Treads (S.S.701 & special)

a) Treads wide : 0.3 m

(BLD-CSTN-9-7)
Unit 10 sqm.
A. MATERIALS:
High Polished Granite 16 to 18 mm 10.50 Sqm 2500.00 1 Sqm 26250.00
thick
Cement for CM(1:5) for base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:5) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.00 Nos 630.00 1 Each 1890.00
Mason 2nd class 1.00 Nos 565.00 1 Each 565.00
Mazdoor(un skilled) 8.00 Nos 525.00 1 Each 4200.00
MA @ 40% 0.40 6655.00 2662.00
Machine cutting charges 33.33 RM 19.00 1 RM 633.33
Half rounding the edges 33.33 RM 350.00 1 RM 11666.67
MA @ 40% 0.40 4920.00 1968.00
Add water charges 1% 0.01 50567.22 505.67
Rate for 10sqm 51072.90

Rate for other Floors FF SF

Rate as worked out above 51072.90 51072.90
Lift charges ( Page 131 of Std. Data ) 0.00 492.00

MA @ 40% 0.00 196.80

51072.90 51761.70
Overheads & Contractors Profit 6953.57 7047.35
@13.615%
Rate per 10 Sqm 58026.47 58809.05
Rate per 1 Sqm 5802.65 5880.90
 CIVIL DATA : Page-168

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! b) Providing Risers to steps walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other
than black and regular colours length equal to flooring stone, set over base coat of CM(1:5) 12 mm thick
using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and
jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished
item of work. for Risers-0.15 m(APSS No.701 &707)

Risers of 0.15m height : 0.15 m

(BLD-CSTN-9-19)
Unit= 10.00 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2500.00 1 sqm 26250.00
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg 155.00

Machine cutting charges 66.67 RM 19.00 1 RM 1266.67

MA @ 40% 0.40 506.67 202.67
B.LABOUR
Mason 1st class 2.10 Nos. 630.00 1 Each 1323.00
Man Mazdoor(Beldar) 4.90 Nos. 525.00 1 Each 2572.50
MA @ 40% 0.40 3895.50 1558.20
Add water charges 1% 0.01 33874.26 338.74
Rate for 10 sqm 34213.00

Rate for other Floors FF

Rate as worked out above 34213.00
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
34213.00
Overheads & Contractors Profit 4658.10
@13.615%
Rate per 10 Sqm 38871.10
Rate per 1 Sqm 3887.11
Say 3887

#REF! Providing Treads for step's with 16 to 18mm thick Antique Finished granite I- CLASS slabs up to 8'-00 (2.43
M) other than black and regular colours with borders and design as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick
using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like
consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of
matching shade to full depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of
treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors
profit complete for finished item of work for Coping &Treads (S.S.701 & special)

a) Treads wide : 0.33 m

(BLD-CSTN-9-7)
Unit 10 sqm.
A. MATERIALS:
As per Quotation Antique Finished granite 16 to 18 mm 10.50 Sqm 3040.00 1 Sqm 31920.00
thick

Cement for CM(1:5) for base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
 CIVIL DATA : Page-169

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing 6.00 Kgs 31.00 1 Kg 186.00
Sand for CM(1:5) 0.12 Cum 2176.00 1 Cum 261.12
B .LABOUR
Mason 1st class 3.00 Nos 630.00 1 Each 1890.00
Mason 2nd class 1.00 Nos 565.00 1 Each 565.00
Mazdoor(un skilled) 8.00 Nos 525.00 1 Each 4200.00
MA @ 40% 0.40 6655.00 2662.00
Machine cutting charges 30.30 RM 19.00 1 RM 575.76
Half rounding the edges 30.30 RM 350.00 1 RM 10606.06
MA @ 40% 0.40 4472.73 1789.09
Add water charges 1% 0.01 54940.13 549.40
Rate for 10sqm 55489.53

Rate for other Floors FF SF

Rate as worked out above 55489.53 55489.53
Lift charges ( Page 131 of Std. Data ) 0.00 665.50

MA @ 40% 0.00 266.20

55489.53 56421.23
Overheads & Contractors Profit 7554.90 7681.75
@13.615%
Rate per 10 Sqm 63044.43 64102.98
Rate per 1 Sqm 6304.44 6410.30

#REF! a) Providing Risers to steps with 16 to 18mm thick Antique Finished granite I- CLASS slabs length equal to
flooring stone, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey
like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,
and overheads & contractors profit complete for finished item of work. for Risers-0.13 m(APSS No.701 &707)

b) Risers of 0.15m height : 0.13 m

(BLD-CSTN-9-19)
Unit= 10.00 sqm
A.MATERIALS :
As per Quotation Antique Finished granite 16 to 18 mm 10.50 sqm 3040.00 1 sqm 31920.00
thick
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg 155.00

Machine cutting charges 76.92 RM 19.00 1 RM 1461.54

MA @ 40% 0.40 584.62 233.85
B.LABOUR
Mason 1st class 2.10 Nos. 630.00 1 Each 1323.00
Man Mazdoor(Beldar) 4.90 Nos. 525.00 1 Each 2572.50
MA @ 40% 0.40 3895.50 1558.20
Add water charges 1% 0.01 39770.31 397.70
Rate for 10 sqm 40168.01

Rate for other Floors FF SF

 CIVIL DATA : Page-170

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Rate as worked out above 40168.01 40168.01
Lift charges ( Page 131 of Std. Data ) 0.00 389.55

MA @ 40% 0.00 155.82

40168.01 40713.38
Overheads & Contractors Profit 5468.87 5543.13
@13.615%
Rate per 10 Sqm 45636.88 46256.51
Rate per 1 Sqm 4563.69 4625.65

Skirting & Dadooing, Cladding

19 Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs 15mm to
18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand
with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., complete and overheads & contractors profit complete for finished item of
work.(APSS No.701 &707)

(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of Shahabad stone slabs 11.00 sqm 1900.00 10 sqm 2090.00
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
B.LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos. 565.00 1 Each 1265.60
Mazdoor(unskilled) 3.10 Nos. 525.00 1 Each 1627.50
MA @ 40% 0.40 3497.90 1399.16
Add water charges 1% 0.01 7533.28 75.33
Rate for 10 sqm 7608.62

Rate for other Floors FF

Rate as worked out above 7608.62
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
7608.62
Overheads & Contractors Profit 1035.91
@13.615%
Rate per 10 Sqm 8644.53
Rate per 1 RM 86.45

20 Providing skirting to internal walls to 10.00 cm height with Polished Kadapa stone slabs minimum of 15mm
thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement,
sand and water etc., complete and overheads & contractors profit complete for finished item of work.(APSS
No.701 &707)
(BLD-CSTN-9-22)
Unit = 10 sqm
A.MATERIALS :
Cost of Kdapa stone slabs 11.00 sqm 1750.00 10 sqm 1925.00
 CIVIL DATA : Page-171

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
B.LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2nd class 2.24 Nos. 565.00 1 Each 1265.60
Mazdoor(unskilled) 3.10 Nos. 525.00 1 Each 1627.50
MA @ 40% 0.40 3497.90 1399.16
Add water charges 1% 0.01 7368.28 73.68
Rate for 10 sqm 7441.97

Rate for other Floors FF SF

Rate as worked out above 7441.97 7441.97
Lift charges ( Page 131 of Std. Data ) 0.00 349.79

MA @ 40% 0.00 139.92

7441.97 7931.67
Overheads & Contractors Profit 1013.22 1079.90
@13.615%
Rate per 10 Sqm 8455.19 9011.57
Rate per 1 RM 84.55 90.12

21 Providing skirting to internal walls to 10 cm height with non-skid full body ceramic floor tiles of thickness
between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and
finish in all shades and designs as approved by Engineer-in-charge, length equal to flooring tiles, set over
base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at
the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to
full depth, including cost of all materials like tiles, cement, sand and water, overheads & contractors profit
complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of full body ceramic tiles 8 mm 10.50 sqm 375.00 1 sqm 3937.50
thick
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 6.00 Kgs 31.00 1 Kg 186.00

B.LABOUR
Mason 1st class 0.77 Nos. 630.00 1 Each 485.10
Mazdoor(unskilled) 0.80 Nos. 525.00 1 Each 420.00
MA @ 40% 0.40 905.10 362.04
Add water charges 1% 0.01 5936.86 59.37
Rate per 10 Sqm 5996.23

Rate for other Floors FF SF

Rate as worked out above 5996.23 5996.23
Lift charges ( Page 131 of Std. Data ) 0.00 90.51

MA @ 40% 0.00 36.20

5996.23 6122.95
Overheads & Contractors Profit 816.39 833.64
@13.615%
 CIVIL DATA : Page-172

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Rate per 10 Sqm 6812.62 6956.59
Rate per 1 RM 68.13 69.57

22 Providing skirting to internal walls to 10 cm height with soluble salt porcelain vitrified tiles screen printed
and polished of thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts
1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of
CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of
3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,
including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit
complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-20)
Unit = 10 sqm
Cost of vitrified tiles 8-10mm thick 10.50 sqm 425.00 1 sqm 4462.50
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 2.00 Kgs 31.00 1 Kg 62.00

B.LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2st class 2.24 Nos. 565.00 1 Each 1265.60
Mazdoor(unskilled) 3.30 Nos. 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 10114.78 101.15
Rate for 10 sqm 10215.93

Rate for other Floors FF SF

Rate as worked out above 10215.93 10215.93
Lift charges ( Page 131 of Std. Data ) 0.00 360.29

MA @ 40% 0.00 144.12

10215.93 10720.34
Overheads & Contractors Profit 1390.90 1459.57
@13.615%
Rate per 10 Sqm 11606.83 12179.91
Rate per 1 RM 116.07 121.80

18 Providing cladding Granite to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M)
other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm
thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of
all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished
item of work.

(BLD-CSTN-9-19)
cladding Size of 1.20 mx0.75 m
Unit 10.00 0.75
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2500.00 1 sqm 26250.00
 CIVIL DATA : Page-173

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg 155.00

Machine cutting charges 13.33 RM 19.00 1 RM 253.33

MA @ 40% 0.40 101.33 40.53
B.LABOUR
Mason 1st class 2.10 Nos. 630.00 1 Each 1323.00
Man Mazdoor(Beldar) 4.90 Nos. 525.00 1 Each 2572.50
MA @ 40% 0.40 3895.50 1558.20
Add water charges 1% 0.01 32698.79 326.99
Rate for 10 sqm 33025.78

Rate for other Floors FF

Rate as worked out above 33025.78
Lift charges ( Page 131 of Std. Data ) 0.00

MA @ 40% 0.00
33025.78
Overheads & Contractors Profit 4496.46
@13.615%
Rate per 10 Sqm 37522.24
Rate per 1 Sqm 3752.22

#REF! Providing cladding to walls with granite stone tiles 8mm thick (mirror polished of all shades) of 1st quality
length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste
mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for finished item of work.

(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
granite stone tiles 8mm thick 10.50 sqm 1100.00 1 sqm 11550.00
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 5.00 Kgs 31.00 1 Kg 155.00

Machine cutting charges 66.67 RM 19.00 1 RM 1266.73

MA @ 40% 0.40 506.69 202.68
B.LABOUR
Mason 1st class 0.96 Nos. 630.00 1 Each 604.80
Mason 2st class 2.24 Nos. 565.00 1 Each 1265.60
Man Mazdoor(Beldar) 3.30 Nos. 525.00 1 Each 1732.50
MA @ 40% 0.40 3602.90 1441.16
Add water charges 1% 0.01 18764.69 187.65
Rate for 10 sqm 18952.34
 CIVIL DATA : Page-174

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Rate for other Floors FF SF
Rate as worked out above 18952.34 18952.34
Lift charges ( Page 131 of Std. Data ) 0.00 360.29

MA @ 40% 0.00 144.12

18952.34 19456.74
Overheads & Contractors Profit 2580.36 2649.04
@13.615%
Rate per 10 Sqm 21532.70 22105.78
Rate per 1 sqm 2153.27 221.06

#REF! Providing dadooing to walls with glazed full body ceramic tiles of any size and thickness between 5 to 7mm
1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades
and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and
jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished
item of work.
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles 10.50 sqm 435.00 1 sqm 4567.50
Sand for CM(1:5) base coat 0.12 cum 2176.00 1 cum 261.12
Cement for CM(1:5) base coat 34.56 Kgs 4220.00 1000 Kgs 145.84
Cement for slurry 33.00 Kgs 4220.00 1000 Kgs 139.26
White cement for jointing & pointing 6.00 Kgs 31.00 1 Kg 186.00

B.LABOUR
Mason 1st class 0.77 Nos. 630.00 1 Each 485.10
Mazdoor(unskilled) 0.80 Nos. 525.00 1 Each 420.00
MA @ 40% 0.40 905.10 362.04
Add water charges 1% 0.01 6566.86 65.67
Rate for 10 sqm 6632.53

Rate for other Floors FF SF

Rate as worked out above 6632.53 6632.53
Lift charges ( Page 131 of Std. Data ) 0.00 90.51

MA @ 40% 0.00 36.20

6632.53 6759.25
Overheads & Contractors Profit 903.02 920.27
@13.615%
Rate per 10 Sqm 7535.55 7679.52
Rate per 1 Sqm 753.56 767.95

#REF! Full rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-
V.11

MATERIAL:
BMM- Rate as per SSR 1 Rmt 453.00 1.00 Rmt 453.00
V.11

Overheads & Contractors Profit 0.13615 453.00 61.68

@13.615%
Cost of 1 Rmt 514.68
 CIVIL DATA : Page-175

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! Half Rounding the edges of granite stone slabs of all thickness including polishing the same as per SoR BMM-
V.10

MATERIAL:
BMM- Rate as per SSR 1 Rmt 350.00 1.00 Rmt 350.00
V.10

Overheads & Contractors Profit 0.13615 350.00 47.65

@13.615%
Cost of 1 Rmt 397.65

Painting
21 White washing two coats with white cement to ceiling to give an even shade after thoroughly brushing the
surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour
charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for
finished item of work in all floors.

(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
White cement 2.00 kgs 31.00 1 kgs 62.00
B.LABOUR :
Painter 1st class 0.063 Nos. 705.00 1 Each 44.42
Painter 2nd class 0.147 Nos. 565.00 1 Each 83.05
Mazdoor(unskilled) 0.32 Nos. 525.00 1 Each 168.00
MA @ 40% 0.40 295.47 118.19
Sundries including brushes , ladders 1% 475.66 4.76
etc., @ 1%
Rate per 10 sqm 480.41
Overheads & Contractors Profit 0.13615 480.41 65.41
@13.615%
Rate per 10 sqm 545.82
Rate per 1 sqm 54.58

22 Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the
surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface,
clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand
with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials
to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete
for finished item of work in all floors for Internal walls
(As per Amendment in SoR 2011-12)
Unit = 10 Sqm
wall putty 23.00 Kgs 600.00 20 Kg 690.00
Painter 1st class 0.273 Nos. 705.00 1 Each 192.47
Painter 2nd class 0.637 Nos. 565.00 1 Each 359.91
Mazdoor 0.910 Nos. 525.00 1 Each 477.75
MA @ 40% 0.40 1030.12 412.05
Sundries for emery papers, fillers, knife 0.01 2132.17 21.32
etc., @ 1%
2153.49
Overheads & Contractors Profit 0.13615 2153.49 293.20
@13.615%
Rate per 10 sqm 2446.69
Rate per 1 sqm 244.67
 CIVIL DATA : Page-176

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

23 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture (Brick Leave White Houzz
Wallpaper Paint Background Orange Red Texture) of average 2 to 3 mm thickness over plastered surface to
prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of
loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying
putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation
including cost and conveyance of all materials to work site and all operational, incidental, labour charges,
scaffolding charges, overheads and contractors profit etc., complete for finished item of work in all floors for
external walls
(As per Amendment in SoR 2011-12)
Unit = 10 Sqm
exterior texture 34.50 Kgs 818.00 25 Kg 1128.84
Painter 1st class 0.273 Nos. 705.00 1 Each 192.47
Painter 2nd class 0.637 Nos. 565.00 1 Each 359.91
Mazdoor 0.91 Nos. 525.00 1 Each 477.75
MA @ 40% 0.40 1030.12 412.05
Sundries for emery papers, fillers, knife 0.01 2571.01 25.71
etc., @ 1%
Hire charges for Access Scaffolding 10 sqm 1.08 1 sqm 10.80

Labour charges for scaffolding 10 sqm 8.47 1 sqm 84.70

MA @ 40% 0.40 84.70 33.88
2726.10
Overheads & Contractors Profit 0.13615 2726.10 371.16
@13.615%
Rate per 10 sqm 3097.26
Rate per 1 sqm 309.73

24 Painting to new walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC content less
than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 coats
in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose
powdered materials, including cost and conveyance of all materials to work site and all operational,
incidental, labour charges etc., and overheads & contractors profit complete for finished item of work as per
APSS 911 for internal walls in all floors.
(BLD-CSTN-12-1)
Unit = 10 Sqm
Cost of white cement 0.50 Kg 31.00 1 Kg 15.50
Painter 1st class 0.08 Nos. 705.00 1 Each 56.40
Painter 2nd class 0.19 Nos. 565.00 1 Each 107.35
Cost of washable oil bound distemper 1.70 Ltrs 81.00 1 Ltr 137.70

Painter 1st class 0.36 Nos. 705.00 1 Each 253.80

Painter 2nd class 0.84 Nos. 565.00 1 Each 474.60
MA @ 40% 0.40 892.15 356.86
Sundries including brushes , ladders 0.01 1402.21 14.02
etc., @ 1%
1416.23
Overheads & Contractors Profit 0.13615 1416.23 192.82
@13.615%
Rate per 10 sqm 1609.05
Rate per 1 sqm 160.91
 CIVIL DATA : Page-177

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
23 Painting to new walls with 2 coats of water proof cement paint of shade as approved by the Engineer-In-
Charge over a base coat of approved white cement base coat making 3 coats in all to give an even shade after
thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost
and conveyance of all materials to work site and all operational, incidental, labour charges etc., and
overheads & contractors profit complete for finished item of work as per SS 912 in all floors
(BLD-CSTN-12-1 & 12-5)
Cost of white cement for base coat 1.00 Kgs 31.00 1 Kgs 31.00

Painter 1st class 0.08 Nos. 705.00 1 Each 56.40

Painter 2nd class 0.19 Nos. 565.00 1 Each 107.35
Water proof cement paint 2.00 Kgs 1009.00 25 Kgs 80.72
Painter 1st class 0.15 Nos. 705.00 1 Each 105.75
Painter 2nd class 0.35 Nos. 565.00 1 Each 197.75
Mazdoor(unskilled) 1.50 Nos. 525.00 1 Each 787.50
MA @ 40% 0.40 1254.75 501.90
Sundries including brushes , ladders 0.01 1868.37 18.68
etc., @ 1%
1887.05
Overheads & Contractors Profit 0.13615 1887.05 256.92
@13.615%
Rate per 10 sqm 2143.98
Rate per 1 sqm 214.40

24 Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic
emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls
including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all
labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

(BLD-CSTN-12-2& Amendment in SoR 2011-12)

Unit 10 Sqm.
A. Materials:-
Cost of cement primer interior grade I 1.00 Kg 160.00 1 Kg 160.00

Painter 1st class 0.21 Nos. 705.00 1 Each 148.05

Painter 2nd class 0.49 Nos. 565.00 1 Each 276.85
Acrylic emulsion paint 0.80 Ltrs 190.00 1 Ltrs 152.00
Painter 1st class 0.36 Nos. 705.00 1 Each 253.80
Painter 2nd class 0.84 Nos. 565.00 1 Each 474.60
MA @ 40% 0.40 1153.30 461.32
Sundries including brushes , ladders 0.01 1926.62 19.27
etc., @ 1%
1945.89
Overheads & Contractors Profit 0.13615 1945.89 264.93
@13.615%
Rate per 10 sqm 2210.82
Rate per 1 sqm 221.08

#REF! Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic
exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for
exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc., and overheads & contractors profit complete for finished item of work
in all floors.
 CIVIL DATA : Page-178

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
(BLD-CSTN-12-2& Amendment in SoR
2011-12)

Unit 10 Sqm.
A. Materials:-
Cost of cement primer exterior grade II 1.00 Kg 200.00 1 Kg 200.00
Painter 1st class 0.21 Nos. 705.00 1 Each 148.05
Painter 2nd class 0.49 Nos. 565.00 1 Each 276.85
Acrylic emulsion paint 0.80 Ltrs 190.00 1 Ltrs 152.00
Painter 1st class 0.21 Nos. 705.00 1 Each 148.05
Painter 2nd class 0.49 Nos. 565.00 1 Each 276.85
Mazdoor(Unskilled) 1.50 Nos. 525.00 1 Each 787.50
MA @ 40% 0.40 1637.30 654.92
Sundries including brushes , ladders 0.01 2644.22 26.44
etc., @ 1%
2670.66
Overheads & Contractors Profit 0.13615 2670.66 363.61
@13.615%
Rate per 10 sqm 3034.27
Rate per 1 sqm 303.43

#REF! Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two
coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre of
approved shade including cost and conveyance of all materials to site cost of primer coat and all labour
charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other
taxes on cost of all materials etc., and overheads & contractors profit complete in all floors (APSS No.1200,
1207 & 1211).
(BLD-CSTN-12-6 & 12-12-195)
Cost of Putty for wood work 1 Kg 130.00 1 Kg 130.00
Primer Coat
Cost of Wood Primer 0.70 Ltr 160.00 1 Ltr 112.00
1st Class Painter 0.21 Nos. 705.00 1 Each 148.05
2nd Class Painter 0.49 Nos. 565.00 1 Each 276.85
2 coats of Enamel painting
Cost of Synthetic Enamel Paint 1.20 Ltr 270.00 1 Ltr 324.00
1st Class Painter 0.36 Nos. 705.00 1 Each 253.80
2nd Class Painter 0.84 Nos. 565.00 1 Each 474.60
MA @ 40% 0.40 1153.30 461.32
Sundries including brushes , ladders 0.01 2180.62 21.81
etc., @ 1%
2202.43
Overheads & Contractors Profit 0.13615 2202.43 299.86
@13.615%
Rate per 10 sqm 2502.29
Rate per 1 sqm 250.23

1.70mts 1.80mts
13 Painting primer coat on new wood work using red oxide Iron primer paint grade - 1 of approved brand
including cost and conveyance of all materials to site , all labour charges etc., and overheads & contractors
profit complete in all floors.(APSS No. 1201, 1212 & 1207).

(BLD-CSTN-12-7)
Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 145.00 1 Ltr 101.50
 CIVIL DATA : Page-179

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
B.LABOUR :
1st Class Painter 0.21 Nos. 705.00 1 Each 148.05
2nd Class Painter 0.49 Nos. 565.00 1 Each 276.85
MA @ 40% 0.40 424.90 169.96
Sundries including brushes , ladders 0.01 696.36 6.96
etc., @ 1%

703.32
Overheads & Contractors Profit 0.13615 703.32 95.76
@13.615%
Rate per 10 sqm 799.08
Rate per 1 sqm 79.91

14 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than
50 grams/litre to new iron work including cost and conveyance of all materials to site, sales & other taxes,
incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished
item of work in all floors. (SS No. 1201, 1212 & 1207).

(BLD-CSTN-12-12-197)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 1.10 Ltr 270.00 1 Ltr 297.00
B.LABOUR :
1st Class Painter 0.33 Nos. 705.00 1 Each 232.65
2nd Class Painter 0.77 Nos. 565.00 1 Each 435.05
MA @ 40% 0.40 667.70 267.08
Sundries including brushes , ladders 0.01 1231.78 12.32
etc., @ 1%
1244.10
Overheads & Contractors Profit 0.13615 1244.10 169.38
@13.615%
Rate per 10 sqm 1413.48
Rate per 1 sqm 141.35

14 Painting to new iron work with one coat of Red oxide primer and two coats with synthetic enamel paint
Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxid,
including cost and conveyance of all materials like Red oxide primer ,Synthetic Enamel Paint to site, sales &
other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete
for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

(BLD-CSTN-12-7 & 12-12-197)

Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 145.00 1 Ltr 101.50
Cost of Synthetic Enamel Paint 1.10 Ltr 270.00 1 Ltr 297.00
B.LABOUR :
for primer coat
1st Class Painter 0.21 Nos. 705.00 1 Each 148.05
2nd Class Painter 0.49 Nos. 565.00 1 Each 276.85
for enamel painting
1st Class Painter 0.33 Nos. 705.00 1 Each 232.65
2nd Class Painter 0.77 Nos. 565.00 1 Each 435.05
 CIVIL DATA : Page-180

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.40 1092.60 437.04
Sundries including brushes , ladders 0.01 1928.14 19.28
etc., @ 1%
1947.42
Overheads & Contractors Profit 0.13615 1947.42 265.14
@13.615%
Rate per 10 sqm 2212.56
Rate per 1 sqm 221.26

15 Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in-
Charge including cost and conveyance of materials to site and labour charges etc., overheads & contractors
profit complete for finished item of work.

Cost of 50mm thick jali 1.00 sqm 388.00 1 sqm 388.00

1st class mason 0.06 Nos. 630.00 1 Each 37.80
2nd class mason 0.06 Nos. 565.00 1 Each 33.90
Mazdoor(unskilled) 0.275 Nos. 525.00 1 Each 144.38
MA @ 40% 0.40 216.08 86.43
690.51
Rate for other Floors FF SF
Rate as worked out above 690.51 690.51
Hire charges for Access Scaffolding 10.78 10.78
Labour charges for scaffolding 84.68 121.18
MA @ 40% 33.87 48.47
Lift charges ( Page 131 of Std. Data ) 0.00 2.16
MA @ 40% 0.00 0.86
Rate for 1 sqm 819.84 873.96
Overheads & Contractors Profit 111.62 118.99
@13.615%
Rate per 1 sqm 931.46 992.95

16 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together
through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe
shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom
locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood
cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all
accessories etc., overheads & contractors profit complete for finished item of work as per special spn: 1108
Rate as per SSR 1.00 sqm 4025.00 1 sqm 4025.00
Overheads & Contractors Profit 0.13615 4025.00 548.00
@13.615% 4573.00
Rate per 1 sqm Say 4573

False ceiling
17 Providing and fixing in true horizontal level 12 mm - Mineral Fiber sheet 600 x 600 (Square / Tegular) edge
tiles with a Humidity Resistance of 90% RH,Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity
λ= 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 using hot dipped Galvanized Steel section exposed
surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary
stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200
mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at
every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire including cost and
conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof
making, overheads & contractor profit etc., complete for finished item of work in all floor in all floors.

(BLD-CSTN-10-33 & vide Page No. 391 of SoR 2011-12)

 CIVIL DATA : Page-181

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Unit 1 Sqm
A) Material requirement
12mm Mineral Fiber sheet 600 x 600 1.00 sqm 467.00 1 sqm 467.00

Hot dipped GI Angle - Precoated - Grid - 0.40 RM 37.00 1 RM 14.80

19mmx19mmX0.7mm
Polyster painted GI - T section - 1.60 RM 50.00 1 RM 80.00
1200mm - 24x32mm and 24x25mm
(sub-cross Tee)
Polyster painted GI-T Section - 300mm - 1.60 RM 49.00 1 RM 78.40
24mm x 27mm
GI Rod - prestraightened - 2.0mm dia - 1.28 RM 10.00 1 RM 12.80
Connecting Rod
6mm Nylon Rawl Plug 1.28 Nos. 4.00 1 No. 5.12
B) Labour charges
1st Class Carpenter 0.12 Nos. 705.00 1 No. 84.60
2nd Class Carpenter 0.12 Nos. 565.00 1 No. 67.80
1st Class Painter 0.024 Nos. 705.00 1 No. 16.92
2nd Class Painter 0.024 Nos. 565.00 1 No. 13.56
Power Saw cutter - Hand Operated - 0.012 Nos. 705.00 1 No. 8.46
Operator
Power Drill - Hand Operated - Operator 0.012 Nos. 705.00 1 No. 8.46
Unskilled Mazdoor 0.072 Nos. 525.00 1 No. 37.80
MA @ 40% 0.40 237.60 95.04
C) Machinery
Power Saw cutter - Hand Operated - 0.32 Hours 132.00 1 No. 42.24
Hire Charges
Power Drill - Hand Operated - Hire 0.32 Hours 121.00 1 No. 38.72
Charges 1071.72
Scaffolding charges 1% 0.01 1071.72 10.72
Basic Cost per 1 sqm 1082.44
Overheads & Contractors Profit 0.13615 1082.44 147.37
@13.615%
Rate per 1 sqm 1229.81
Say 1230

18 Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm
thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27
mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610
mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm)
from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel
expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5
mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the
12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using
joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing
compound, two coats of drywall topcoat including overheads and contractor profit etc., complete for finished
item of work
(BLD-CSTN-10-31 & vide Page No. 389 of SoR 2011-12)
Unit - 1 Sqm
A) Material requirement as per India
Gypsum
12.5mm Gypboard
1219mm x 1829mm size Boards 1.03 sqm 221.00 1 sqm 227.63
GI Ceiling Angle - 25mm x 10mm x 0.64 RM 78.00 1 RM 49.92
0.5mm
GI Ceiling section - 51.5mm x 26mm x 0.84 RM 106.00 1 RM 89.04
10.5mm x 0.55mm thick
 CIVIL DATA : Page-182

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Intermediate channel - 45mm x 15mm x 0.84 RM 78.00 1 RM 65.52
15mm x 0.9mm
Perimeter channel - 20mm x 27mm x 0.40 RM 69.00 1 RM 27.60
30mm (web) of 0.55mm thick
Connecting Clips 1.84 Nos. 10.00 1 No. 18.40
Rawl Plug 0.64 Nos. 4.00 1 No. 2.56
Soffit Cleats 0.64 Nos. 5.00 1 No. 3.20
Drywall screws - 25mm 18.00 Nos. 4.00 1 No. 72.00
Jointing Compound 0.55 Kgs. 32.00 1 Kg. 17.60
Jointing Paper tape 1.46 RM 6.00 1 RM 8.76
Drywall top coat 0.15 Ltrs 150.00 1 Ltr 22.50
B) Labour Charges
1st Class Carpenter 0.12 Nos. 705.00 1 No. 84.60
2nd Class Carpenter 0.12 Nos. 565.00 1 No. 67.80
1st Class Painter 0.024 Nos. 705.00 1 No. 16.92
2nd Class Painter 0.024 Nos. 565.00 1 No. 13.56
Power Saw cutter - Hand Operated - 0.012 Nos. 705.00 1 No. 8.46
Operator
Power Drill - Hand Operated - Operator 0.024 Nos. 705.00 1 No. 16.92
Unskilled Mazdoor 0.072 Nos. 525.00 1 No. 37.80
MA @ 40% 0.40 246.06 98.42
C) Machinery
Power Saw cutter - Hand Operated - 0.32 Hours 132.00 1 Hour 42.24
Hire Charges
Power Drill - Hand Operated - Hire 0.64 Hours 121.00 1 Hour 77.44
Charges 1068.89
Scaffolding charges 1% 0.01 1068.89 10.69
Rate per 1 sqm 1079.58
Overheads & Contractors Profit 0.13615 1079.58 146.99
@13.615% 1226.57
Say 1227

19 Providing and fixing Thermocole False ceiling in true horizontal level 600mm x 600mm using 12mm thick
Thermocole sheet, anodized Aluminium Tee sections of size 24.50mm x 24.0mm x 2.4mm in grid with cross
tee of size 24mm x 24.5mm at every 600mm centre to centre and anodised aluminium wall angle of size
24mm x 24mm fixed to periphery of the wall and the above grid is suspended at every 1200mm centre to
centre in both directions using 2.0mm thick GI wire for finished of size 600mm x 600mm including cost and
conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing
roof complete for finished item of work in all floors. (The rate is inclusive of overheads & contractor profit).

(BLD-CSTN-10-34 & vide Page No. 392 of SoR 2011-12)

Unit 1 Sqm
A) Material requirement
12mm Thermocole sheet 1.00 sqm 32.00 1 sqm 32.00
Aluminium angle - 24mmx 24mm 0.40 RM 33.00 1 RM 13.20
Anodised Aluminium T section - 24mm 3.20 RM 32.00 1 RM 102.40
x 24.5mm
GI x 2.4mm
rod-prestraightened 2.0mm dia. - 1.28 Nos. 10.00 1 No. 12.80
Connecting
Rawl plugs rod 1.28 Nos. 4.00 1 No. 5.12
B) Labour charges
1st Class Carpenter 0.11 Nos. 705.00 1 No. 76.14
2nd Class Carpenter 0.11 Nos. 565.00 1 No. 61.02
Power Saw cutter - Hand Operated - 0.02 Nos. 705.00 1 No. 14.10
Operator
Power Drill - Hand Operated - Operator 0.04 Nos. 705.00 1 No. 28.20
Unskilled Mazdoor 0.20 Nos. 525.00 1 No. 105.00
MA @ 40% 0.40 284.46 113.78
C) Machinery
Power Saw cutter - Hand Operated - 0.16 Hours 132.00 1 No. 21.12
Hire Charges
Power Drill - Hand Operated - Hire 0.32 Hours 121.00 1 No. 38.72
Charges 623.60
Scaffolding charges 1% 0.01 623.60 6.24
Basic Cost per 1 Sqm 629.84
Overheads & Contractors Profit 0.13615 629.84 85.75
@13.615%
Rate per 1 sqm 715.59
Say 716
 CIVIL DATA : Page-183

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

Roofing
20 Roofing with corrugated G.I sheets 0.80mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I
limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved
paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins,
rafters, trusses including cost and conveyance of all materials , labour charges , overheads and contractors
profit etc., complete for finished item of work in all floors.

Unit : 10 sqm
A. MATERIALS:
G.I corrugated 0.80 mm thick sheets 103.09 Kgs 70.00 1 Kg 7216.30
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 47.91 Nos. 6.00 1 No. 287.46
884
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 43.90 Nos. 11.00 1 No. 482.90
3 nos washers
Limpet = 810 nos.
(for with
scam washers or
& ‘J’ bolts) 91.82 Nos. 2.00 1 No. 183.64
screws,
884 ifwashers
+ 810
Bitumen wooden
= 1694 battens used. 91.82 Nos. 2.00 1 No. 183.64
Zinc cromate yellow paint 0.14 Ltrs 200.00 1 Ltr 28.00
Ready mixed paint 0.20 Ltrs 270.00 1 Ltr 54.00
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 565.00 1 No. 474.60
Man mazdoor (beldar) 0.91 Nos. 525.00 1 No. 477.75
For primer painting one coat
Painter 1st class 0.018 Nos. 705.00 1 No. 12.69
Painter 1st class 0.042 Nos. 565.00 1 No. 23.73
Mazdoor (coolie) 0.06 Nos. 525.00 1 No. 31.50
For two coats of painting to over laps
Painter 1st class 0.042 Nos. 705.00 1 No. 29.61
Painter 1st class 0.098 Nos. 565.00 1 No. 55.37
Mazdor (coolie) 0.14 Nos. 525.00 1 No. 73.50
MA @ 40% 0.40 1178.75 471.50
Rate per 10 sqm 10086.19
Rate per 1 sqm 1008.62
Overheads & Contractors Profit 0.13615 1008.62 137.32
@13.615%
Rate per 1 sqm 1145.94
say 1146

21 Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness,
Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester
painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length:
Maximum 12 Meters with Regular Range Colours fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I
limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved
paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins,
rafters, trusses including cost and conveyance of all materials , labour charges , overheads and contractors
profit etc., complete for finished item of work in all floors.

Unit : 10 sqm
A. MATERIALS:
Galvalume sheet 0.50mm thick 10.50 sqm 407.00 1 sqm 4273.50
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 47.91 Nos. 6.00 1 No. 287.46
884
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 43.90 Nos. 11.00 1 No. 482.90
3 nos = 810 nos. with washers or
screws, if wooden battens used.
Limpet washers (for scam & ‘J’ bolts) 91.82 Nos. 2.00 1 No. 183.64
Bitumen washers 91.82 Nos. 2.00 1 No. 183.64
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 565.00 1 No. 474.60
Man mazdoor (beldar) 0.91 Nos. 525.00 1 No. 477.75
MA @ 40% 0.40 952.35 380.94
 CIVIL DATA : Page-184

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Rate per 10 sqm 6744.43
Rate per 1 sqm 674.44
Overheads & Contractors Profit 0.13615 674.44 91.83
@13.615%
Rate per 1 sqm 766.27
say 766
15 BLD.CST Providing and laying of best tiled roofing with pressed clay (Mangalore tiles) size 250 x 150 x 15 mm thick and
N-10.9 laying as per the pattern approved by the Engineer-in-Charge on roofs jointed with cement mortar 1:4 (1
cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick
cement mortar 1:4 (1 cement : 4 coarse sand) including Rabbit wire mesh (Chicken mesh) of not less than 30
gauge and jointed neatly with white cement paste to full depth mixed with pigment of matching shade at
required place including cost and conveyance of all materials like cement, sand, water, tiles, Rabbit wire
mesh, white cement etc., to site including cost of all labour charges for mixing of cement mortar, laying
tiles to required slope as directed by the Engineer- in-charge etc., and overheads & contractors profit
complete for finished item of work.

Details of cost for 10 sqm

MATERIAL:
No. of tiles rquired 10/0.250 x 0.15 =
266 + 10%
As per Pressed clay tiles 15mm thick 250x150 293.00 Nos. 25.00 1 Each 7325.00
Market mm size (Mangalore Tile)
Rate
BMT- Rabbit wire mesh (Chicken mesh) of not 10.00 Sqm 21.00 1 Sqm 210.00
F.28 less than 30 gauge

Cement Mortar (1:4) 0.09 Cum 3951.00 1 Cum 355.59

BMT- High durable cementitious acrylic based 0.01 Kg 0.00 1 Kg 0.00
H.26 waterproofing
systems
LABOUR:
Mason (brick layer) 1 st class 0.50 Day 630.00 Day 315.00
Man mazdoor 1.10 Day 525.00 Day 577.50
Woman mazdoor 2.20 Day 525.00 Day 1155.00
MA @ 40% 0.40 2047.50 819.00
Add Water Charges @ 1% 0.01 10757.09 107.57
Cost of 10 sqm 10864.66
Cost of 1 sqm 1086.47

16 ( BLD- Supply and fixing of cement bonded board 8 mm thick and laying as per the pattern approved by the
CSTN- Engineer-in-Charge on purlins, rafters, trusses, including cost and conveyance of all materials like approved
10-26 ) cement bonded board, nails, labour charges , overheads and contractors profit etc., complete for finished
item of work in all floors. excluding the cost of purlins, rafters, trusses.

Unit : 10 Sqm
MATERIAL:
BMT-K.90 Cement Bonded Board 8mm Thick 10 Sqm 309.00 1 Sqm 3090.00
LABOUR:
Carpenter 1st class 2.5 Day 705.00 1 Day 1762.50
Mazdoor 2 Day 525.00 1 Day 1050.00
MA @ 40% 0.40 2812.50 1125.00
Add CPOH @ 13.615% 0.13615 7027.50 956.79
Cost of 10 sqm 7984.29
Cost of 1 sqm 798.43
 CIVIL DATA : Page-185

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

#REF! Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted
from approved quarry including cost and conveyance of all materials like cement, screened sand,
water,Rough stone Through stone, Coursed stones etc., from approved quarry, to site, including labour
charges for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing,
charges for scaffolding etc., and overheads & contractors profit complete for finished item of work. (APSS
No. 601 & 615)

( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 4220.00 1000 Kgs 250.67
Coursed stone 0.44 Cum 1121.25 1 Cum 493.35
Rough stone (HBG) 0.50 Cum 703.20 1 Cum 351.60
Through stone 25x25x 0.45 to 60 cm 0.16 Cum 1837.58 1 Cum 294.01
Fine aggregate(sand) 0.33 Cum 2081.00 1 Cum 686.73
B) LABOUR
1st class mason 1.20 Nos. 630.00 1 Each 756.00
Mazdoor (unskilled) 2.00 Nos. 525.00 1 Each 1050.00
MA @ 40% 0.40 1806.00 722.40
4604.76
Add water charges 0.01 4604.76 46.05
Rate per 1 cum 4650.81

a Up to basement
Rate as worked out above 1.00 Cum 4650.81 1 Cum 4650.81
Overheads & Contractors Profit 0.13615 4650.81 633.21
@13.615%
Rate per 1 cum 5284.02

b) Superstructure :
Rate for other Floors FF SF
Rate as worked out above 4650.81 4650.81
Hire charges for Access Scaffolding 23.96 23.96

Labour charges for scaffolding 188.18 269.29

MA @ 40% 75.27 107.72
Lift charges ( Page 131 of Std. Data ) 0.00 180.60

MA @ 40% 0.00 72.24

Rate per 1 cum 4938.22 5304.61
Overheads & Contractors Profit 672.34 722.22
@13.615%
Rate per 1 cum 5610.56 6026.83

#REF! Coursed Rubble stone masonry 2nd sort, in CM (1:6) prop: (Cement: Sand) using hard granite stones from
approved quarry including cost and conveyance of all materials like Coursed Rubble stones, Through stones
25 x 25x 45 to 60 cms, cement, sand, water, etc., to site, all operational, incidental, and labour charges such
as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc.,
complete for finished item of work. (APSS No. 601 & 612)
 CIVIL DATA : Page-186

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
BLD-CSTN-6-6
A. MATERIALS:
Cost of cement 76.80 Kgs 4220.00 1000 Kgs 324.10
Coursed Rubble Stone 0.94 Cum 1121.25 1 Cum 1053.98
Through stones 25 x 25x 45 to 60 cms 0.16 Cum 1837.58 1 Cum 294.01

Sand 0.32 cu.m. 2081.00 1 cu.m. 665.92

B. LABOUR:
1st Class Mason 1.50 Nos 630.00 1 Each 945.00
Mazdoor (unskilled) 2.32 Nos 525.00 1 Each 1218.00
MA @ 40% 0.40 2163.00 865.20
Add water charges @ 1% 0.01 5366.20 53.66
Rate per 1 cum 5419.87

a Up to basement
Rate as worked out above 1.00 Cum 5419.87 1 Cum 5419.87
Overheads & Contractors Profit 0.13615 5419.87 737.91
@13.615%
Rate per 1 cum 6157.78

b Superstructure :
Rate for other Floors FF SF
Rate as worked out above 5419.87 5419.87
Hire charges for Access Scaffolding 23.96 46.87

Labour charges for scaffolding 188.18 526.87

MA @ 40% 75.27 210.75
Lift charges ( Page 131 of Std. Data ) 0.00 216.30

MA @ 40% 0.00 86.52

Rate per 1 cum 5707.27 6507.17
Overheads & Contractors Profit 777.05 885.95
@13.615%
Rate per 1 cum 6484.32 7393.12

Pointing for masonry work

29 Flush/Sunk Pointing to Brick / RR Masonry in CM (1:3) including cost and conveyance of all materials at site
excluding seigniorage charges on all materials and all operational, incidental labour charges, curing etc
complete for finished item of work. (BLD-CSTN-7-1)
BLD-CSTN-7-1
Unit = 10 sqm
A. MATERIALS:
Lead Cement 14.4 Kg 4220.00 1000 Kg 60.77
Lead Fine aggregate (Sand) 0.03 Cum 2176.00 1 Cum 65.28
B. LABOUR:
Mason 2nd class 0.5 Day 565.00 1 Day 282.50
Mazdoor (unskilled) 0.74 Day 525.00 1 Day 388.50
MA @ 40% 0.40 671.00 268.40
Add water charges @ 1% 0.01 1065.45 10.65
1076.10
Add contractor profit @ 13.615% 0.13615 1076.10 146.51
Rate per 10 Sqm 1222.61
Rate per 1 Sqm 122.26
 CIVIL DATA : Page-187

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

30 Raised Pointing to RR Masonry in CM (1:3) including cost and conveyance of all materials at site excluding
seigniorage charges on all materials and all operational, incidental labour charges, curing etc complete for
finished item of work. (BLD-CSTN-7-3)
BLD-CSTN-7-3
Unit = 10 sqm
A. MATERIALS:
Lead Cement 28.8 Kg 4220.00 1000 Kg 121.54
Lead Fine aggregate (Sand) 0.06 Cum 2176.00 1 Cum 130.56
B. LABOUR:
Mason 2nd class 0.5 Day 565.00 1 Day 282.50
Mazdoor (unskilled) 0.74 Day 525.00 1 Day 388.50
MA @ 40% 0.40 671.00 268.40
Add water charges @ 1% 0.01 1191.50 11.91
1203.41
Overheads & Contractors Profit 0.13615 1203.41 163.84
@13.615%
Rate per 10 Sqm 1367.26
Rate per 1 Sqm 136.73

Kerb work
#REF! Supply and fixing of C.C. Kerb not less than M30 strength of size 600 X 375 X 100 mm thick with bottom
thickness of 100 mm upto height of 300 mm and top width of 50 mm thick chamfering with 45° at starts at
300 mm height to 375 mm height as selected by the Engineer-in-charge from approved source/ factory which
is laid on existing CC Bed jointing with C.M(1:3) including cost and conveyance of all materials & labour
charges including transportation , loading & unloading charges including contractor profit & overhead charges
complete for finished item of work.

Unit : 6 Rmt
A.MATERIALS :
As per Material cost(Market rate) including 6.00 Rmt 481.83 1 Rmt 2890.98
Quotation transportation as per market rate
Add wastage @ 2% 0.020 2890.98 57.82
Lead Add cost of CM(1:3) 0.025 Cum 4457.40 1 Cum 111.44
B. LABOUR
Mason 1st class 0.063 Nos. 630.00 1 Each 39.69
Mason 2nd class 0.147 Nos. 565.00 1 Each 83.05
Mazdoor (unskiled) 0.217 Nos. 525.00 1 Each 113.93
MA @ 40% 0.400 236.67 94.67
Rate per 6 Rmt 3391.57
Rate per 1 Rmt 565.26

#REF! Supply and fixing of Ornamental Vacuum Dewatered Pimple finished Splay C.C. Kerb of Basant Betons make
not less than M40 strength, of size 600 X 375 X 100 mm thick with bottom thickness of 100 mm upto height
of 300 mm and top width of 50 mm thick chamfering with 45° at starts at 300 mm height to 375 mm (As per
drawing), can be laid on existing CC Bed jointing with C.M(1:3) including cost and conveyance of all material
with all Taxes & labour charges including transportation complete for finished item of work

Unit : 6 Rmt
A.MATERIALS :
 CIVIL DATA : Page-188

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
As per Material cost(Market rate) including 6.00 Rmt 572.30 1 Rmt 3433.80
Quotati transportation as per market rate
on
Add wastage @ 2% 0.020 3433.80 68.68
Lead Add cost of CM(1:3) 0.025 Cum 4457.40 1 Cum 111.44
B. LABOUR
Mason 1st class 0.06 Nos. 630.00 1 Each 39.69
Mason 2nd class 0.15 Nos. 565.00 1 Each 83.05
Mazdoor (unskiled) 0.22 Nos. 525.00 1 Each 113.93
MA @ 40% 0.40 236.67 94.67
Rate per 6 Rmt 3945.25
Add Transportation Charges 6.0 Rmt 145.00 1 Rmt 870.00
Rate per 1 Rmt 802.54

#REF! Supply and fixing of Kadapa slab (rough) 50mm thick and size of 0.457x0.457m stone edging including
excavating trench in ordinary soil and fixing the stone in alignment and refilling the excavated soil conveyance
of all materials and labour charges including transportation complete for finished item of work

Unit : 10 Rmt=4.57 sqm

A.MATERIALS :
BMT- Rough Kadapa stone (50 mm) thick size 4.57 Sqm 145.00 1 Sqm 662.65
B.02 0.457 x 0.457m
B. LABOUR
Excavating trench (10x0.15x0.15) in 0.082 Nos. 525.00 1 cum 43.05
ordinary soil
Mazdoor (unskiled) for fixing stone 0.22 Nos. 525.00 1 day 115.50
MA @ 40% 0.40 158.55 63.42
884.62
Overheads & Contractors Profit 0.13615 884.62 120.44
@13.615%
10 Rmt= 4.57 Sqm 1005.06
1 Rmt 100.51

#REF! Supply & fixing of Dressed Granite cubes of size of 100x100x100 mm for Heavy traffic areas the shapes and
designs as per the specification set over the 50 mm thick sand bed with hand roller compaction with joint
neatly in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings
furnished by the architect, including cost of all materials like cement, sand water and tiles etc., complete for
finished item of work

Unit : 10 Sqm
A. MATERIALS :
As Per Dressed Granite cubes of size of 1000.00 Nos 25.00 1 Each 25000.00
Quotati 100x100x100 mm
on
Lead Filling Sand 0.50 Cum 1024.00 1 Cum 512.00

Lead Cement for jointing 6.00 Kgs 4220.00 1000 Kg 25.32

B. LABOUR
BMT- Labour charges as per SoR 10.00 Sqm 220.00 1 Sqm 2200.00
D.32
MA @ 40% 0.40 2200.00 880.00
Add water charges 1% 0.01 28617.32 286.17
Total 28903.49
 CIVIL DATA : Page-189

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
Rate per 10 Sqm 28903.49
Rate per 1 Sqm 2890.35

#REF! Supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50 mm for Non- traffic
areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over
the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or heterogeneous
pattern as the colour and pattern shall be as per the drawings furnished by the architect, including cost of all
materials like cement, sand water and tiles etc., complete for finished item of work
Unit : 10 Sqm
A. MATERIALS :
BMT-D- Precast concrete blocks for paving of M- 10.10 Sqm 350.00 1 sqm 3535.00
12 30 grade and thickness not less than 50
mm for Non-traffic areas

Lead Sand for base 0.50 Cum 1024.00 1 Cum 512.00

Lead Cement for jointing at edges 6.00 Kgs 4220.00 1000 Kgs 25.32
B. LABOUR
BMT- Labour charges for laying & fixing of 10.00 Sqm 220.00 1 Sqm 2200.00
D.17 precast concrete blocks for paving of all
grades, any thickness, all sizes & shapes
including all labour charges for loading
& unloading, laying to desired lines and
levels complete excluding cost of
cement, sand, water, electricity etc

MA @ 40% 0.40 2200.00 880.00

Add water charges 1% 0.01 7152.32 71.52
Total 7223.84
Overheads & Contractors Profit 0.13615 7223.84 983.53
@13.615%
10 Sqm 8207.37
1 Sqm 820.74

#REF! Data as Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic
per SOR areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over
2016-17 the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or heterogeneous
pattern as the colour and pattern shall be as per the drawings furnished by the architect, including cost of all
materials like cement, sand water and tiles etc., complete for finished item of work

Unit : 10 Sqm
A. MATERIALS :
BMT-D- precast concrete blocks for paving of 10.10 Sqm 390.00 1 sqm 3939.00
13 M-35 grade and thickness not less than
60 mm for Light traffic areas

Lead Sand for base 0.50 Cum 1024.00 1 Cum 512.00

Lead Cement for jointing at edges 6.00 Kgs 4220.00 1000 Kgs 25.32
B. LABOUR
 CIVIL DATA : Page-190

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
BMT- Labour charges for laying & fixing of 10.00 Sqm 220.00 1 Sqm 2200.00
D.17 precast concrete blocks for paving of all
grades, any thickness, all sizes & shapes
including all labour charges for loading
& unloading, laying to desired lines and
levels complete excluding cost of
cement, sand, water, electricity etc

MA @ 40% 0.40 2200.00 880.00

Add water charges 1% 0.01 7556.32 75.56
Total 7631.88
Overheads & Contractors Profit 0.13615 7631.88 1039.08
@13.615%
10 Sqm 8670.96
1 Sqm 867.10

#REF! Supply of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium
traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set
over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or
heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect,
including cost of all materials like cement, sand water and tiles etc., complete for finished item of work

Unit : 10 Sqm
A. MATERIALS :
BMT-D- precast concrete blocks for paving of 10.10 Sqm 550.00 1 Sqm 5555.00
14 M-40 grade and thickness not less than
80 mm for Medium traffic areas

Lead Sand for base 0.50 Cum 1024.00 1 Cum 512.00

Lead Cement for jointing at edges 6.00 Kgs 4220.00 1000 Kgs 25.32
B. LABOUR
BMT- Labour charges for laying & fixing of 10.00 Sqm 220.00 1 Sqm 2200.00
D.17 precast concrete blocks for paving of all
grades, any thickness, all sizes & shapes
including all labour charges for loading
& unloading, laying to desired lines and
levels complete excluding cost of
cement, sand, water, electricity etc

MA @ 40% 0.40 2200.00 880.00

Add water charges 1% 0.01 9172.32 91.72
Total 9264.04
Overheads & Contractors Profit 0.13615 9264.04 1261.30
@13.615%
10 Sqm 10525.34
1 Sqm 1052.53
 CIVIL DATA : Page-191

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
#REF! Supply of precast concrete blocks for paving of M-50 grade and thickness not less than100 mm for Heavy
traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set
over the 100 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or
heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect,
including cost of all materials like cement, sand water and tiles etc., complete for finished item of work

Unit : 10 Sqm
A. MATERIALS :
BMT-D- precast concrete blocks for paving of 10.10 Sqm 610.00 1 Sqm 6161.00
15 M-50 grade and thickness not less than
100 mm for Heavy traffic areas

Lead Sand for base 1.00 Cum 1024.00 1 Cum 1024.00

Lead Cement for jointing at edges 6.00 Kgs 4220.00 1000 Kgs 25.32
B. LABOUR
BMT- Labour charges for laying & fixing of 10.00 Sqm 220.00 1 Sqm 2200.00
D.17 precast concrete blocks for paving of all
grades, any thickness, all sizes & shapes
including all labour charges for loading
& unloading, laying to desired lines and
levels complete excluding cost of
cement, sand, water, electricity etc

MA @ 40% 0.40 2200.00 880.00

Add water charges 1% 0.01 10290.32 102.90
Total 10393.22
Overheads & Contractors Profit 0.13615 10393.22 1415.04
@13.615%
10 Sqm 11808.26
1 Sqm 1180.83

#REF! Supply of precast concrete blocks for paving of M-55 grade and thickness not less than120 mm for very heavy
traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set
over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or
heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect,
including cost of all materials like cement, sand water and tiles etc., complete for finished item of work

Unit : 10 Sqm
A. MATERIALS :
BMT-D- precast concrete blocks for paving of 10.10 Sqm 700.00 1 Sqm 7070.00
16 M-55 grade and thickness not less than
120 mm for very heavy traffic areas

Lead Sand for base 0.50 Cum 1024.00 1 Cum 512.00

Lead Cement for jointing at edges 6.00 Kgs 4220.00 1000 Kgs 25.32
B. LABOUR
 CIVIL DATA : Page-192

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
BMT- Labour charges for laying & fixing of 10.00 Sqm 220.00 1 Sqm 2200.00
D.32 precast concrete blocks for paving of all
grades, any thickness, all sizes & shapes
including all labour charges for loading
& unloading, laying to desired lines and
levels complete excluding cost of
cement, sand, water, electricity etc

MA @ 40% 0.40 2200.00 880.00

Add water charges 1% 0.01 10687.32 106.87
Total 10794.19
Overheads & Contractors Profit 0.13615 10794.19 1469.63
@13.615%
10 Sqm 12263.82
1 Sqm 1226.38

34 Data as Supply & Laying of Shot Blasted Pavers of Basant Betons make not less than M40 strength and size of 200 x
per SOR 100 x 60 mm for Medium traffic areas in rectangle shapes and regular colours designs as per the
2016-17 manufacturer's specification set over the 50 mm thick sand bed with hand roller compaction with joint neatly
in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished
by the architect, including cost of Transportation & cost of all materials with all Taxes like cement, sand water
and tiles etc., complete for finished item of work

Unit : 10 Sqm
A. MATERIALS :
As per Shot Blasted Pavers “Key Blok” size: 10.05 Sqm 1327.50 1 Sqm 13341.38
Quotati 200 x 100 x 60 mm
on
Lead Sand for base 0.50 Cum 1024.00 1 Cum 512.00
Cement for jointing at edges 6.00 Kgs 4220.00 1000 Kgs 25.32
B. LABOUR
BMT- Labour charges for laying & fixing of 10.00 Sqm 220.00 1 Sqm 2200.00
D.32 precast concrete blocks for paving of all
grades, any thickness, all sizes & shapes
including all labour charges for loading
& unloading, laying to desired lines and
levels complete excluding cost of
cement, sand, water, electricity etc

MA @ 40% 0.40 2200.00 880.00

Add water charges 1% 0.01 16958.70 169.59
Rate per 10Sqm 17128.28
Add Transportation Charges 10.05 Sqm 240.00 1 Sqm 2412.00
Rate per 1Sqm 1954.03

Light Weight Steel Works by using Rectangular hollow sections

square / rectangular MS hollow section

 CIVIL DATA : Page-193

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
20 Data as Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors,
per SOR Windows, Gates, MS Frame for chain link mesh works, Roof Trusses by using square / rectangular MS hollow
2016-17 section as per IS 4923 including cost of welding rods, power charges, labour charges for cutting, placing,
welding and erecting in position and fixing, cost & convenience of all materials including wastage to site with
all taxes and duties etc complete for finished item of work

Data for 1 Kg
Cost of MS steel including @ 2.5% 1.025 Kg 60.00 1.00 Kg 61.50
wastage
BMM- Fabrication charges 1.00 Kg 30.00 1.00 Kg 30.00
V.14
MA @ 40% on 75% fabrication after 0.40 22.50 9.00
deduction of power charges and
welding rods and welding machine
BMM- Erections charges 1.00 Kg 6.00 1.00 Kg 6.00
V.15
MA @ 40% 0.40 6.00 2.40
Over heads of @ 13.615% 0.13615 108.90 14.83
Rate for 1 Kg 123.73
MS Flats
#REF! Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors,
Windows, Gates, MS Frame for chain link mesh works ,Roof Trusses by using MS Flats as per SP:6(1) IS Hand
book , including cost of welding rods, power charges, labour charges for cutting, placing, welding and
erecting in position and fixing, cost & convenience of all materials to site with all taxes and duties etc
complete for finished item of work
Data for 1 Kg
Cost of MS steel including @2.5% 1.025 Kg 60.00 1.00 Kg 61.50
wastage
BMM- Fabrication charges 1.00 Kg 30.00 1.00 Kg 30.00
V.14
MA @ 40% on 75% fabrication after 0.40 22.50 9.00
deduction of power charges and
welding rods and welding machine
BMM- Erections charges 1.00 Kg 6.00 1.00 Kg 6.00
V.15
MA @ 40% 0.40 6.00 2.40
Over heads of @ 13.615% 0.13615 108.90 14.83
Rate for 1 Kg 123.73
MS solid plate
#REF! Supply and fabrication works like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, Roof
Trusses by using MS solid plate section as per IS 1730 including cost of welding rods, power charges, labour
charges for cutting, placing, welding & erecting in position and fixing cost & convenience of all materials
including wastage to site with all taxes and duties etc complete for finished item of work.

Data for 1 Kg
Cost of MS solid plate including @ 2.5% 1.025 Kg 70.00 1.00 Kg 71.75
wastage
BMM- Fabrication charges 1.00 Kg 30.00 1.00 Kg 30.00
V.16
MA @ 40% on 75% fabrication after 0.40 22.50 9.00
deduction of power charges and
welding rods and welding machine
BMM- Erections charges 1.00 Kg 6.00 1.00 Kg 6.00
V.17
 CIVIL DATA : Page-194

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.40 6.00 2.40
Over heads of @ 13.615% 0.13615 119.15 16.22
Rate for 1 Kg 135.37
MS Sheet
#REF! Supply and fabrication works like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, Roof
Trusses by using HR sheet as per IS 2062 including cost of welding rods, power charges, labour charges for
cutting, placing, welding & erecting in position and fixing cost & convenience of all materials to site with all
taxes and duties etc complete for finished item of work.

Data for 1 Kg
Cost of HR sheet 1.6mm thick including 1.025 Kg 70.00 1.00 Kg 71.75
@ 2.5% wastage
BMM- Fabrication charges 1.00 Kg 30.00 1.00 Kg 30.00
V.16
MA @ 40% on 75% fabrication after 0.40 22.50 9.00
deduction of power charges and
welding rods and welding machine
BMM- Erections charges 1.00 Kg 6.00 1.00 Kg 6.00
V.17
MA @ 40% 0.40 6.00 2.40
Over heads of @ 13.615% 0.13615 119.15 16.22
Rate for 1 Kg 135.37
Tubes & pipes
21 Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors,
Windows, Gates, MS Frames for Chain link mesh, Roof Trusses by using tubes & pipes MS hollow section as
per IS 1161 including cost of welding rods, power charges, labour charges for cutting, placing, welding and
erecting in position and fixing, cost & convenience of all materials including wastage to site with all taxes and
duties etc complete for finished item of work
Data for 1 Kg
BMT-F- Cost of MS hollow tubes & pipes Kg 1.025 76.00 1 Kg 77.90
04 section including @ 2.5% wastage
BMM- Fabrication charges Kg 1.00 30.00 1 Kg 30.00
V.14
MA @ 40% on 75% fabrication after 0.40 22.50 9.00
deduction of power charges and
welding rods and welding machine
BMM- Erections charges Kg 1.00 6.00 1 Kg 6.00
V.15
MA @ 40% 0.40 6.00 2.40
Over heads of @ 13.615% 0.13615 125.30 17.06
Rate for 1 Kg 142.36

22 CPWD Supply and laying of the C.C. pavement of V.R.C.C Nominal Mix Concrete M 20 grade corresponding to IS
16.75 & 456 with minimum cement content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with 20mm
(BLD- size HBG graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386
CSTN-3- Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine
13-C) aggregate (sand) coarse aggregate, water etc. including all operational, incidental and labour charges.The
design mix concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and
finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of
Engineer-in-charge including pannel shuttering & labour charges.

Unit :1 Cum
 CIVIL DATA : Page-195

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
(BLD- A) M-20 grade concrete for CC work 1.000 Cum 6398.70 1 Cum 6398.70
CSTN-3- (using cement @ 330 kg/cum)
13-C)
9999 Operational charges for vacuum 57.200 L.S. 1.73 L.S. 98.96
dewatering system including screed
vibration , placing of filter mat, top mat,
vacuum process, floating , troweling,
brooming etc.
9999 T & P charges including consumable 41.600 L.S. 1.73 L.S. 71.97
power charges, loading , unloading and
hire charges of equipments
Hire charges of panel shuttering 1.000 Cum 301.00 1 Cum 301.00
Labour charges 1.000 Cum 672.00 1 Cum 672.00
MA @ 40% 0.400 672.00 268.80
Add water charges @ 1% except on [A] 0.010 1143.92 11.44

7822.87
Overheads & Contractors Profit 0.136 7822.87 1065.08
@13.615%
Rate per 1 cum 8887.95

23 RBR- Construction of granular sub-base by providing Well graded/ Close Graded granular sub-base material as per
SBBS1 - Table 400.1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place
3 method with rotavator at OMC, and compacting with Vibratory pad foot roller 8 t to achieve the desired
density, complete as per Technical Specification Clause 401 MORD / MORTH.

For Grading III Material (CBR Value

minimum 20)
Unit = cum
Taking output = 300 cum
a) Labour
Mason II Class 2.400 Day 565.00 1 Day 1356.00
Mazdoor (Unskilled) 8.000 Day 525.00 1 Day 4200.00
MA @ 40% 0.400 5556.00 2222.40
7778.40
b) Machinery
Vibratory pad foot roller 8 t 6.000 Hour 3111.00 1 Hour 18666.00
Crew Charges 6.000 Hour 368.20 1 Hour 2209.20
MA @ 40% 0.400 2209.20 883.68
Tractor with Rotavator 25 cum per hour 12.000 Hour 532.00 1 Hour 6384.00

Water tanker 6 kl capacity 3.000 Hour 806.00 1 Hour 2418.00

30560.88
c) Material
Well graded/ Close Graded granular
sub-base material as per Table 400.1

7 mm to 5 mm 134.400 Cum 1013.20 1 Cum 136174.08

5 mm to 2.36 mm 48.000 Cum 860.20 1 Cum 41289.60
2.36 mm below 201.600 Cum 840.20 1 Cum 169384.32
Water 18.000 Kl 125.00 1 Kl 346848.00
Cost for 300 cum = a+b+c 385187.28
 CIVIL DATA : Page-196

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
MA @ 40% 0.400 385187.28 154074.91
Rate per 300 cum 539262.19
Rate per cum 1797.54

22 (IRR- Providing casing embankment using gravel from approved area in layers of 25 cm with compaction including
CAW-2- cost of all materials, machinery, labour, all operations such as materials transporting, spreading in layer of
8) specified thickness, breaking clods, sectioning, compacting each layer without watering by Road roller 10
tonne etc.,complete with initial lead up to 70.0 km and all lifts etc., include all incidental incomplete.

(IRR-CAW-2-8)
Unit : 1.00 cum
Taking output = 677.28 cum
a)Machinery
Angle dozer 90hp 6.06 hour 1650.20 1.00 hour 10000.21
Fuel/Energy charges 6.06 hour 1055.30 1.00 hour 6395.12
Road Roller 10tonne 6.16 hour 192.30 1.00 hour 1184.57
Fuel/Energy charges 6.16 hour 1234.30 1.00 hour 7603.29
b) Labour
Crew for Dozer 6.06 hour 326.30 1.00 hour 1977.38
Crew for road roller 6.16 hour 299.50 1.00 hour 1844.92
Work inspector 2.00 day 685.00 1.00 day 1370.00
Mazdoor 4.00 day 525.00 1.00 day 2100.00
MA @ 40% 0.40 7292.30 2916.92
c)Material :
Murrum/gravel 677.28 cum 439.40 1.00 cum 297596.83
332989.24
Overheads&Contractors Profit 0.13615 332989.24 45336.48
@13.615%
Rate per 677.28 cum 378325.72
Rate per 1.00 cum 558.60
23 Providing and constructing 30 cm thick rubble stone pitching set in CM 1: 5 proportion with pin headers at 2
per sqm in including cost of all materials, labour, packing chips and mortar, finishing, curing etc., complete
with initial lead up to 50 m and all lifts.
( rubble stones : 0.275 cum/sqm, Stone Chips : 0.045cum/sqm, Pin Headers 30cm : 2/sqm)

IRR-CAW-8-7
Unit = 100 sqm
Taking output = 1 Sqm
A.MATERIALS
Cement 3000.00 Kgs 4220.00 1000 Kgs 12660.00
Un-coursed rubble stones (at quarry) 27.50 Cum 778.20 1 Cum 21400.50

Pin header (Through stone) 25x25x30 3.75 Cum 2205.20 1 Cum 8269.50

Stone chips @ 15 % quarry 4.50 Cum 840.20 1 Cum 3780.90

Fine aggregate(sand) 10.50 Cum 2176.00 1 Cum 22848.00
B) LABOUR
Crew for Pump 2.00 Hours 153.50 1 Hours 307.00
Work Inspector 1.00 Day 685.00 1 Day 685.00
Mason Class II 5.00 Day 565.00 1 Day 2825.00
Mazdoor (unskilled) 12.00 Day 525.00 1 Day 6300.00
MA @ 40% 0.40 10117.00 4046.80
 CIVIL DATA : Page-197

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.
C) Machinery
Dewatering pump 5 hp (Diesel) 2.00 Hours 146.80 1 Hour 293.60
Add water charges 0.01 83416.30 834.16
84250.46
Overheads & Contractors Profit 0.13615 84250.46 11470.70
@13.615%
Rate per 100 sqm 95721.16
Rate per 1 sqm 957.21
24 Soling with 150 - 200 mm cubes hard stone including 25% of Metal of 45 - 90 mm size for packing and 20%
Gravel for filling interstices and compacting with 80 tonne Roller including hire charges of Power Roller,
watering etc. complete.

RBR-SBBS-5
Unit = cum
Taking output = 1 cum
A.MATERIALS
Hard stone 150 - 200 mm size (Granite) 1.100 cum 503.20 1.00 cum 553.52
(Soling Stone)
45-90 mm size metal (Hand broken) 0.270 cum 1133.20 1.00 cum 305.96
Gravel 0.220 cum 439.40 1.00 cum 96.67
Water 0.100 kl 125.00 1 kl 12.50
B) LABOUR
Men Mazdoor for conveyance & 1.100 day 525.00 1 day 577.50
packing
Women Mazdoor 0.700 day 525.00 1 day 367.50
MA @ 40% 0.400 945.00 378.00
C) Machinery
Hire & Fuel charges for vibratory Roller 0.100 hour 3111.00 1.00 hour 311.10
8 tonne to Consolidating soling

Crew charges for vibratory Roller 8 0.100 hour 368.20 1.00 hour 36.82
tonne
MA @ 40% 0.400 36.82 14.73
Water Tanker 6Kl capacity 0.016 hour 806.00 1.00 hour 12.90
2667.20
Overheads & Contractors Profit @ 0.13615 2667.20 363.14
13.615%
Rate per cum = (a+b+c+d) 3030.33

25 Providing and fixing 1.80 metre long RCC fencing posts with 6 mm bar bibs as per design in plate No. 22/2/2.
(earth work & concrete to be paid for separately)

BLD-CSTN-15-6
Unit =Details of cost for 10 posts, i.e., 0.336 Cu. M
Taking output = 1 Post
A.Material
Cement concrete M 20 design mix using 0.336 cum 6398.703 1 cum 2149.964329
(BLD-CSTN-3-13 12mm size hard granite machine
- c) crushed graded meta
M.S. reinforcement 6 mm dia bars 26.440 kg 82.852 1 kg 2190.60688
10 x 4 x 1.88 = 75.20 metres
(BLD-CSTN-4.2) 10 x 9 x 0.50 = 45.00 metres./ l20.00 m
120.20 m @ 0.22 Kg/m=26.44 Kg
 CIVIL DATA : Page-198

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

SOR 17-18 Canteringand shuttering 0.336 cum 430.000 1 cum 144.48

Pg.no 66 item
1-B
Plastering 12mm thick single coat in 9.880 sqm 383.210 1 sqm 3786.1148
CM(1:5)
(BLD-CSTN-8-3)

B.Labour for fixing posts in line

Mason, 1st Class 0.120 day 630.00 1 day 75.60
Mason, 2nd Class 0.120 day 565.00 1 day 67.80
Mazdoor (Male) 0.250 day 525.00 1 day 131.25
MA @ 40% 0.40 day 274.65 109.86
Add Water charges @ 1% 0.010 8545.82 85.46
8741.13
Overheads & Contractors Profit @ 0.13615 8741.13 1190.11
13.615%
Rate per 10 Posts 9931.24
Rate per 1 Post 993.12

26 Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres
(min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision
of galvanised mild steel wire, staples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel,
etc.) and straining bolts shall be paid for separately).
BLD-CSTN-15-7
Unit =Details of Cost per 100 metres (day line of wire)
Taking output = 1 Rmt
A.Material
Galvanised steel barbed wire IS type I 9.380 kg 101.00 1 kg 947.380
SOR 15-16 weighing 9.38 Kg/100 metre
BMT-F.07/08 IOWA/Glidden Type

Carriage of barbed wire.

G.I. staples steel pins or binding wire LS 150.00 LS 150.000

B.Labour for fixing & stretching wire

Blacksmith, 1st Class 0.150 day 590.00 1 day 88.500
Blacksmith/Mason Cl-, 2nd Class 0.150 day 565.00 1 day 84.750
Mazdoor (male). 0.300 day 525.00 1 day 157.500
MA @ 40% 0.40 330.75 132.30
Add water charges @ 1 % 0.010 1428.13 14.281
Overheads & Contractors Profit 0.136 1574.71 214.397
@13.615%
Cost for 100 metres day line of wire 1789.108
Rate per Rmt 17.89

23 Supplying and fixing G.I. Chainlink fabric fencing of required width in mesh size 50x50 mm opening of 4 mm
dia GI wire including strengthening with 2 mm dia wire or nuts, bolts and washers/welding in the MS angle
frame/ RCC fencing posts as required complete as per the direction of Engineer-in-charge and including cost
of all materials to site labour charges etc., complete for finished item of work.

Labour charges for chainlink mesh as per Govt of India Data DSR 16-70.1 at page 920 of year 2015
Unit =10 Sqm
Taking output = 1 Sqm
A.Material
 CIVIL DATA : Page-199

S.No./
Item
Sl. No. Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
Code
No.

BMT F.20Pg No. Chainlink mesh [50x50mm opening] of

10.50 Sqm 506.00 1 Sqm 5313.00
10 4mm dia
Carriage 156.00 LS 1.78 LS 277.68
B.Labour for fixing & stretching fencing

day day
SoR - I.2 Pg.6 Blacksmith 2.14 590.00 1 1262.60

SoR - III.3 Pg.8 Beldar (Mazdoor) 1.62 day 525.00 1 day 850.50

Sundries including GI wire, nuts, bolts

174.75 LS 1.78 311.06
and washers

MA @ 40% 0.40 2113.10 845.24

Overheads & Contractors Profit @13.61 0.13615 8860.08 1206.30
Rate per 10.00 Sqm 10066.37
Rate per 1.00 Sqm 1006.64
1 Data as Supply & Fixing Sadarhalli granite stone with 5 line dressing Double Patti of 5' length seating benches with
per Arm rest with back rest and its width 16'' with 3" thick and18" height with 3" thick and leg size 3'' width ,3'
Quotati height of ex showroom price . including cost and conveyance of all materials like granite , cement to site
on loading , un loading transport, sales & other taxes, incidental, operational and all labour charges overheads
& contractors profit etc., complete for finished item of work

Initial Cost for seating benches with 1 Each 11500.00 1.00 Each 11500.00
Arm rest with back rest
Fitting Charges 10% on Initial Cost 10% 11500.00 1150.00

loading , un loading & transport charges 22% 11500.00 2530.00

to site
Add unforeseen items 20.00
Rate for each 15200.00
 A.P. Greening and Beautification Corporation
Name of the Work:- Detailed estimate for development of Hardscape (Civil) works for OAT with stage ,in
Kurnool City park at Dinnedevarapadu, Kurnool (Dist.)
Estimate Cost: Rs.19.00 Lakhs
Hardscape (Civil works)
Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Construction of OAT 300 seating capacity and with stage 37.0 sqm

1 (BLD- Earth work excavation for foundations (Manual Means) of buildings, septic tank,
CSTN-2- sump, compound wall in ordinary soils and depositing on bank with an initial lead
1) of 10m and depth up to 3m including all operational, incidental, labour charges
such as shoring, sheeting, planking, strutting etc., and overheads & contractors
profit complete for finished item of work excluding dewatering charges etc., as per
SS 20 B(APSS 308)

For OAT step -1 9.72

1 x 1 27.00 0.60 0.60
For OAT step -2 0.60 10.44
1 x 1 29.00 0.60
For OAT step -3 0.60 11.52
1 x 1 32.00 0.60
For OAT step -4 0.60 12.24
1 x 1 34.00 0.60
For OAT step -5 0.60 13.68
1 x 1 38.00 0.60
For OAT step -6 0.60 14.76
1 x 1 41.00 0.60
For OAT step -7 0.90 38.07
1 x 1 47.00 0.90
For OAT side wall from step -1 to step -5 0.90 17.01
1 x 2 10.50 0.90
For stage wall 0.50 11.10
1 x 1 37.00 0.60
For approach steps for stage 0.20 0.80
1 x 2 2.00 1.00
For approach steps for seating area 0.20 3.36
14 x 2 1.20 0.50
142.70 Cum 303.97 Cum 43,376.52
2 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for
CSTN-3- foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate
5) 40mm size hard , machine crushed granite from approved quarry including cost
and conveyance of all materials like cement, sand, coarse aggregate, water etc., to
site, and including all charges for machine mixing, laying concrete in foundations
and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished
item of work. (APSS No. 402)

1.62
For OAT step -1 1 x 1 27.0 0.60 0.10
1.74
For OAT step -2 1 x 1 29.0 0.60 0.10
1.92
For OAT step -3 1 x 1 32.0 0.60 0.10
2.04
For OAT step -4 1 x 1 34.0 0.60 0.10
2.28
For OAT step -5 1 x 1 38.0 0.60 0.10
2.46
For OAT step -6 1 x 1 41.0 0.60 0.10
4.23
For OAT step -7 1 x 1 47.0 0.90 0.10
For OAT side wall from step -1 to step -5 1.89
1 x 2 10.50 0.90 0.10
For stage wall 2.22
1 x 1 37.00 0.60 0.10
For approach steps for stage 0.40
1 x 2 2.00 1.00 0.10
For approach steps for seating area 1.68
14 x 2 1.20 0.50 0.10
For stage floor bed 7.30
1 x 1 73.00 0.10
29.78 Cum 5,374.83 Cum 160,062.44

200
3 (BLD- Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly
CSTN-5- ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved
17) source having minimum crushing strength of 50 Kg/Sqcm. including cost and
conveyance of all materials like cement, sand, bricks, water etc., to site,and such
as labour charges, like mixing cement mortar, scaffolding charges, constructing
masonry, lift charges, curing, overheads and contractor profit etc., complete for
finished item of work. (APSS No. 501 & 504).

For OAT step -1 10.94

1 x 1 27.00 0.45 0.90
For OAT step -2 15.66
1 x 1 29.00 0.45 1.20
For OAT step -3 22.32
1 x 1 32.00 0.45 1.55
For OAT step -4 29.07
1 x 1 34.00 0.45 1.90
For OAT step -5 38.48
1 x 1 38.00 0.45 2.25
For OAT step -6 47.97
1 x 1 41.00 0.45 2.60
For OAT step -7 65.57
1 x 1 47.00 0.45 3.10
For OAT side wall from step -1 to step -5 23.63
1 x 2 10.50 0.45 2.50
For stage wall 14.99
1 x 1 37.00 0.45 0.90
For approach steps for stage -1 0.90
1 x 2 2.00 0.90 0.25
For approach steps for stage -2 0.36
1 x 2 2.00 0.60 0.15
For approach steps for stage -3 0.18
1 x 2 2.00 0.30 0.15
For approach steps for seating area 2.52
14 x 2 1.20 0.5 0.15
272.59 cum 7,803.79 cum 2,127,235.12
(BLD- Filling with useful available excavated earth (excluding rock) with a lead of 50 m in
CSTN-2- trenches, sides of foundations and basement with initial lead in layers not
9) & exceeding 15cm thick, watering and ramming including cost and conveyance of
4 Proc.No. water to work site and all operational, incidental, labour charges, hire charges of
20938 T&P etc., and overheads & contractors profit complete for finished item of work
(R&B)/ (APSS NO.309&310)
Dt:14-5-
2019
stage filling by using excavated Quantity 1 x 1 142.70 142.70

142.70 Cum 43.58 Cum ###

6,218.87
(BLD- Filling with carted gravel in pathways, trenches, sides of foundations and basement
CSTN-2- with initial lead in layers not exceeding 15cm thick, watering and ramming including
8) & cost and conveyance of water to work site and all operational, incidental, labour
5 Proc.No. charges, hire charges of T&P etc., and overheads & contractors profit complete for
20938 finished item of work(APSS NO.309&310)
(R&B)/
Dt:14-5-
2019
Gravel filling between steps 1&2 1 x 1 29.00 1.20 0.60 20.88
Gravel filling between steps 2&3 1 x 1 32.00 1.20 0.95 36.48
Gravel filling between steps 3&4 1 x 1 34.00 1.20 1.30 53.04
Gravel filling between steps 4&5 1 x 1 38.00 1.20 1.65 75.24
Gravel filling between steps 5&6 1 x 1 41.00 1.20 2.00 98.40
Gravel filling between steps 6&7 1 x 1 47.00 1.20 2.20 124.08
408.12 Cum 547.79 Cum ###
223,564.05
6 (BLD- Plastering 20mm thick in two coats using screened sand with base coat of 16mm
CSTN-8- thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing
9) including cost and conveyance of all materials like cement, sand, water etc., to site,
,, and all operational, incidental charges on materials and including cost of all
labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,
including cutting grooves as directed by Engineer-in-charge etc., and overheads &
contractors profit complete for finished item of work .(SS 901,903 & 904)

For OAT step -1 12.15

1 x 1 27.00 0.45
For OAT step -2 13.05
1 x 1 29.00 0.45
For OAT step -3 14.40
1 x 1 32.00 0.45
For OAT step -4 15.30
1 x 1 34.00 0.45
For OAT step -5 17.10
1 x 1 38.00 0.45

201
 For OAT step -6 18.45
1 x 1 41.00 0.45
For OAT step -7 122.20
1 x 1 47.00 2.60
For OAT side wall from step -1 to step -5 27.30
1 x 2 10.50 1.30
For stage wall 20.35
1 x 1 37.00 0.55
For approach steps for seating area 15.12
14 x 2 1.2 0.45
275.42 sqm 608.95 sqm 167,717.01
(BLD- Providing 0.5 wide Coping with 16 to 18mm thick High Polished granite up to 8'-00
CSTN-9- (2.43 M) other than black and regular colours with borders and design as per the
7) pattern approved by the Engineer-in-Charge , set over base coat of cement mortar
(1:5) , 12mm thick using screened sand over the stone ,Brick masonry or CC bed
already laid , including neat grey cement slurry of honey like consistency spread 3.3
Kg per sqm and jointed neatly with white cement paste mixed with pigment of
7 matching shade to full depth including cost and conveyance of all materials like
cement , sand , water , granite slabs etc., to work site and all operational, incidental
labour & lift charges, half rounding the edges of treads , polishing charges and
cost of base coat and overheads & contractors profit complete for finished item of
work for Coping (S.S.701 & special)

For OAT step -1 13.50

1 x 1 27.00 0.50
For OAT step -2 14.50
1 x 1 29.00 0.50
For OAT step -3 16.00
1 x 1 32.00 0.50
For OAT step -4 17.00
1 x 1 34.00 0.50
For OAT step -5 19.00
1 x 1 38.00 0.50
For OAT step -6 20.50
1 x 1 41.00 0.50
For OAT step -7 23.50
1 x 1 47.00 0.50
For OAT side wall from step -1 to step -5 10.50
1 x 2 10.50 0.50

134.50 Sqm 5,147.74 Sqm 692,371.03

###
8 (BLD- Supply & application of one coat water based cement primer of exterior grade II and
CSTN- two coats of acrylic exterior emulsion paint having VOC (Volatile Organic
12-2& Compound) content less than 50 grams/litre for exterior walls including cost and
Amendm conveyance of all materials to site,and all operational, incidental, labour charges
ent in etc., and overheads & contractors profit complete for finished item of work in all
SoR floors.
2011-12)

For OAT step -1 1 x 1 27.00 0.45 12.15

For OAT step -2 1 x 1 29.00 0.45 13.05

For OAT step -3 1 x 1 32.00 0.45 14.40

For OAT step -4 1 x 1 34.00 0.45 15.30

For OAT step -5 1 x 1 38.00 0.45 17.10

For OAT step -6 1 x 1 41.00 0.45 18.45

For OAT step -7 1 x 1 47.00 2.60 122.20

For OAT side wall from step -1 to step -5 1 x 2 10.50 1.30 27.30

For stage wall 1 x 1 37.00 0.55 20.35

For approach steps for seating area 14 x 2 1.20 0.45 15.12

275.42 Sqm 305.26 Sqm 84,074.71

202
9 (BLD- Flooring with 16 to 18mm thick high polished / Flame Finished / leather finished
CSTN-9- granite stone slabs other than black and regular colours (i.e. of shades like
7) paradise / bala flower / copper silk / laka red / lavender blue) with borders and
design as per the pattern approved by the Engineer-in-Charge of length not less
than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using
screened sand over CC bed already laid or RCC roof slab including neat grey
cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching shade to full depth
including cost and conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift charges, polishing
charges and cost of base coat and overheads & contractors profit complete for
finished item of work (S.S.701 & special)

For stage flooring 73.00

1 x 1 73.00
73.00 Sqm 4,186.05 Sqm 305,581.65
10 (BLD- Providing Treads with 16 to 18mm thick high polished / Flame Finished / leather
CSTN-9- finished granite stone slabs other than black and regular colour granite with
7) borders and design as per the pattern approved by the Engineer-in-Charge of
length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm
thick using screened sand over CC bed already laid or RCC roof slab including
neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment of matching shade to full
depth including cost and conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational, incidental labour & lift charges,
half rounding the edges of treads , polishing charges and cost of base coat and
overheads & contractors profit complete for finished item of work for Treads
(S.S.701 & special)

For approach steps for stage 1.0 x 2.0 2.0 0.3 1.20
For approach steps for seating area 14.0 x 2.0 1.2 0.3 10.08
11.28 Sqm 5,256.89 Sqm 59,297.72
11 (BLD- Providing Risers to steps walls with 16 to 18mm thick high polished / Flame
CSTN-9- Finished / leather finished granite stone slabs other than black and regular colour
7) granite with length equal to flooring stone, set over base coat of CM(1:5) 12 mm
thick using screened sand with cement slurry of honey like consistency spread at
the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles,
cement, sand and water etc., and overheads & contractors profit complete for
finished item of work. for Risers-0.15 m(APSS No.701 &707)

For approach steps for stage 1.0 x 2.0 2.0 0.10 0.40
For approach steps for seating area 14.0 x 2.0 1.2 0.10 3.36
3.76 Sqm 4,330.43 Sqm 16,282.42
Total -I 3,885,781.54

203
 A.P. Greening and Beautification Corporation

Name of the Work:- Detailed Estimate for development of Hardscape (Civil) works for
Hindu Crematorium (5.14 Acres) at Guntakal, Anantapuram (Dist.), Andhra Pradesh.
#REF!
Hardscape (Civil works)
Rate Per
Sl.N Item Amount
Description of Item QTY Unit Unit (in
o Code (in Rs.)
Rs.)

For Pathways, entrance plaza , planter boxes and

Seating benches
1 (BLD- Earth work excavation for foundations (Manual Means) of
CSTN- buildings, septic tank, sump, compound wall in ordinary
2-1) soils and depositing on bank with an initial lead of 10m
and depth up to 3m including all operational, incidental,
labour charges such as shoring, sheeting, planking,
strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges
etc., as per SS 20 B(APSS 308)

#REF! Cum 303.97 #REF!

2 (BLD- Plain Cement Concrete (1:4:8) (cement: fine aggregate:
CSTN- Coarse aggregate) for foundations and under flooring bed
3-5) using 162.0 kgs of cement, coarse aggregate 40mm size
hard , machine crushed granite from approved quarry
including cost and conveyance of all materials like
cement, sand, coarse aggregate, water etc. to site,
including sales & other taxes on all materials and including
all charges for machine mixing, laying concrete in
foundations and under flooring bed, ramming in 15 cm
layers finishing top surface to the required level curing
etc., and overheads & contractors profit complete for
finished item of work. (APSS No. 402)

#REF! Cum 5,344.84 #REF!

3 As per Supply and fixing of C.C. Kerb not less than M30 strength
data of size 600 X 375 X 100 mm thick with bottom thickness of
100 mm upto height of 300 mm and top width of 50 mm
thick chamfering with 45° at starts at 300 mm height to
375 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC
Bed jointing with C.M(1:3) including cost and conveyance
of all materials & labour charges including transportation ,
loading & unloading charges including contractor profit &
overhead charges complete for finished item of work.

#REF! Rmt 565.26 #REF!

10 As Per Supply and fixing of Kadapa slab (rough) 50mm thick and
Data size of 0.457x0.457m stone edging including excavating
trench in ordinary soil and fixing the stone in alignment
and refilling the excavated soil conveyance of all materials
and labour charges including transportation complete for
#REF! Rmt 100.51 #REF!
3 (BLD- Vibrated Plain Cement Concrete (1:3:6) nominal mix using
CSTN- 220 kg of cement and 20mm graded machine crushed
3-10 & hard granite metal (coarse aggregate) from approved
11) quarry including cost and conveyance of all materials like
cement, fine aggregate (sand), coarse aggregate, water
etc. to site, sales & other taxes on all materials, all
charges for Concrete Mixer , machine mixing, laying
concrete in position, vibrating, curing, centring charges,
overheads & contractors profit etc., for finished item of
work for footings and basement .

#REF! Cum 7,090.44 #REF!

4 (BLD- Plain Cement Concrete M 20 Nominal mix using Concrete
CSTN- MIXER, 20mm size hard granite machine crushed graded
3-13- metal (coarse aggregate - as per IS 383 - 1970 and IS
C) 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of
concrete , including cost and conveyance of all materials
like cement, fine aggregate (Sand), coarse aggregate,
water etc., to site including steel centring, shuttering,
machine mixing, lift charges, laying concrete, vibrating,
curing, overheads & contractors profit etc., complete for
finished item of work (APSS No. 402 & 403)
#REF! Cum 7,269.89 #REF!

204
11 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete
CSTN- M 20 grade corresponding to IS 456 with minimum cement
3-13-A) content of 350 kgs per 1 cum of concrete using
CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry and including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse
aggregate, water, etc., to site and sales & other taxes on
all materials , centring using Steel scaffolding pipes , jack
props , Waller’s , Foot plates , brackets , steel centring
plates etc., including all operational, incidental and labour
charges such as machine mixing, laying concrete, vibrator,
, curing etc., and overheads & contractors profit complete
but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)

Footings #REF! Cum 10,589.61 #REF!

Column pedestals #REF! Cum 11,268.80 #REF!
Plinth Beams #REF! Cum 13,406.36 #REF!

1 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete

CSTN- M 20 grade corresponding to IS 456 with minimum cement
3-13-B) content of 350 kgs per 1 cum of concrete using
CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry and,including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and sales & other taxes on
all materials, centring using Casurina Ballies, Bamboos,
Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,
including all operational, incidental and labour charges
such as machine mixing, lifting of concrete manually,
laying concrete, vibrator, , curing , overheads &
contractors profit etc., complete but excluding cost of
steel and its fabrication charges for finished item of work
(APSS No. 402)

Pile Column #REF! Cum 10,041.52 #REF!

Columns #REF! Cum 13,300.45 #REF!
WATER TANKS 150 mm thick side walls #REF! Sqm 1,506.23 #REF!

1 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete

CSTN- M 20 grade corresponding to IS 456 with minimum cement
3-13- content of 350 kgs per 1 cum of concrete using
C) CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal (coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and sales & other taxes on
all materials , centring using Casurina Ballies , Bamboos ,
Wooden Reapers , Runners , Wood Posts , Wall Plates
etc., including all operational, incidental and labour
charges such as machine mixing, lifting of concrete
manually, laying concrete, vibrator, , curing , overheads &
contractors profit etc., complete but excluding cost of steel
and its fabrication charges for finished item of work
(APSS No. 402)

Beam's #REF! Cum 11,422.06 #REF!

Roof Slabs 115mm thick : #REF! Sqm 1,319.35 #REF!
Foundation/Base Slabs #REF! Cum 8,680.76 #REF!
0.23mm thickside wlls #REF! Sqm 3,271.45 #REF!

205
1 (BLD- Supply and placing of the V.R.C.C Nominal Mix Concrete
CSTN- M 20 grade corresponding to IS 456 with minimum cement
3-13- content of 350 kgs per 1 cum of concrete using
C) CONCRETE MIXER with 20mm size HBG graded
machine crushed hard granite metal(coarse aggregate -
as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including sales & other
taxes on all materials , centring using Casurina Ballies ,
Bamboos , Wooden Reapers , Runners , Wood Posts ,
Wall Plates etc., for 60cm wide sun-shades 7.5cm thick at
fixed end and 5cm thick at free end with an average
thickness of 6.25cm including all operational, incidental
and labour charges such as , machine mixing, lifting of
concrete manually, laying concrete, curing, overheads &
contractors profit complete etc., but excluding cost of
steel and its fabrication charges for finished item of work
(APSS No. 402, 403 & 903)

for 60cm wide sun-shades 7.5cm thick at fixed end and #REF! Rmt 574.47 #REF!
5cm thick at free end
1 (BLD- Reinforced Cement Concrete Nominal Mix M 20 grade
CSTN- corresponding to IS 456 with minimum cement content of
3-13- 350 kgs per 1 cum of concrete using CONCRETE MIXER
C) with using 12mm size hard granite machine crushed
graded metal (coarse aggregate - as per IS 383 - 1970
and IS 2386 Part 1 to Part 8) from approved quarry, using
a minimum quantity of 350 kgs. of cement per 1 cum of
concrete including cost and conveyance of all materials
like cement, fine aggregate (Sand), coarse aggregate,
water etc., to site including steel centring, shuttering,
labour charges such as ,Concrete machine mixing, laying
concrete, lift charges, curing etc., and overheads &
contractors profit complete for finished item of work
(APSS No. 402 & 403) for platforms and shelves.

50mm thick platforms : #REF! Sqm 587.32 #REF!

25mm thick shelves : #REF! Sqm 293.66 #REF!

4 ( BLD- Random Rubble stone masonry in CM (1:8) prop:

CSTN- (Cement: Screened sand) using hard granite stones
6-13 ) carted from approved quarry including cost and
conveyance of all materials like cement, screened sand,
water,Rough stone Through stone, Coursed stones etc.,
from approved quarry, to site, including labour charges for
cutting stones to required size and shape, mixing, of
cement, mortar, construction, curing, charges for
scaffolding etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 601 & 615)

#REF! Cum 5,284.02 #REF!

11 BLD- Coursed Rubble stone masonry 2nd sort, in CM (1:6)
CSTN- prop: (Cement: Sand) using hard granite stones from
6-6 approved quarry including cost and conveyance of all
materials like Coursed Rubble stones, Through stones 25
x 25x 45 to 60 cms, cement, sand, water, etc., to site, all
operational, incidental, and labour charges such as cutting
stones to required size and shape, mixing of cement
mortar, constructing masonry, curing etc., complete for
finished item of work. (APSS No. 601 & 612)

#REF! Cum 6,157.78 #REF!

11 (BLD- Brick masonry for panel walls in superstructure with CM
CSTN- (1:8) prop: (Cement : Screened sand) using common burnt
5-5) clay bricks of class as per Table- I of IS:1077-1992, Non-
Modular or traditional size 23 x 11 x 7 cms from approved
source having minimum crushing strength of 40 Kg/Sqcm.
including cost and conveyance of all materials like
cement, screened sand, bricks, water etc., to site,
including sales & other taxes on all materials and such as
labour charges, like mixing cement mortar, scaffolding
charges, constructing masonry, lift charges, curing, etc.,
and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).
Up to basement #REF! Cum 7,753.46 #REF!
Superstructure : #REF! Cum 8,392.32 #REF!

206
1 (BLD- Masonry work in CM(1:6) prop (Cement : Screened sand)
CSTN- in superstructure with fly ash cement / lime solid blocks of
5-17) size 290mm x 225mm x 140mm from approved source
having minimum crushing strength of 50 Kg/Sqcm.
including cost and conveyance of all materials like
cement, sand, bricks, water etc., to site, including sales &
other taxes on all materials and such as labour charges,
like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, overheads and
contractor profit etc., complete for finished item of work.
(APSS No. 501 & 504).
Up to basement #REF! Cum 7,774.44 #REF!
Superstructure : #REF! Cum 8,427.52 #REF!
1 ( BLD- Plastering 12mm thick in two coats using screened sand
CSTN- with base coat of 8mm thick in CM (1:6) and top coat of
8-10) 4mm thick in CM (1:4) with dubara sponge finishing
including cost and conveyance of all materials like
cement, sand, water etc., to site, including sales & other
taxes on all materials, and all operational, incidental
charges on materials and including cost of all labour
Up to basement #REF! Sqm 583.33 #REF!
Superstructure : #REF! Sqm 598.04 #REF!
5 (BLD- Plastering 12mm thick single coat in CM(1:5) using
CSTN- screened sand including cost and conveyance of all
8-3) materials like cement, sand, water etc., to site, including
sales & other taxes on all materials, and all operational,
incidental charges on materials and including cost of all
labour charges for mixing mortar, finishing, curing as
directed by Engineer-in-charge etc., and overheads &
Up to basement #REF! Sqm 435.38 #REF!
Superstructure : #REF! Sqm 450.09 #REF!
1 (BLD- Ornamental ceiling plastering 12mm thick single coat in
CSTN- CM (1:5) using screened sand including cost and
8-3) conveyance of all materials like cement, sand, water etc.,
to site, including sales & other taxes on all materials, and
all operational, incidental charges on materials and
including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc.,
#REF! Sqm 465.25 #REF!
1 (BLD- Providing impervious coat to exposed RCC roof slab
CSTN- surfaces to required slopes with CM (1:3) prop. using
10-25) screened sand 20mm thick (average) mixed with integral
cement water proofing liquid confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by
Engineer-in-charge at 1 Kg per one bag of cement, laid
over roof slab when it is green, finished smooth with a
floating coat of neat cement and thread lining at regular
intervals of 45cmx45cm including cost and conveyance of
all materials like cement, sand, water proofing compound,
water etc., to site, including sales & other taxes on all
materials and operational, incidental, and labour charges
for mixing mortar, laying, lift charges, rendering smooth
and thread lining, curing including rounding off junctions of
wall and slab etc., and overheads & contractors profit
complete for finished item of work. (APSS No. 901 & 903).

#REF! Sqm 625.82 #REF!

1 (BLD- RCM facia 50mm thick in CM(1:3) using screened sand for
CSTN- drop walls, fins with rabbit wire mesh & nominal
8-11) reinforcement as directed by Engineer - In - Charge with
dubara sponge finishing, including cost and conveyance of
all materials to site, sales & other taxes on all
materials,operationals &incidental, cost and conveyance
of cement, wire mesh, water to work site, centring,
scaffolding and form work, lift charges etc., and overheads
& contractors profit complete for finished item of work but
excluding cost of steel and its fabrication charges for
finished item of work(APSS NO.403&903)

#REF! Sqm 2,205.69 #REF!

1 BLD- Raised Pointing to RR Masonry in CM (1:3) including cost
CSTN- and conveyance of all materials at site excluding
7-3 seigniorage charges on all materials and all operational,
incidental labour charges, curing etc complete for finished
item of work. (BLD-CSTN-7-3)

Up to basement #REF! Sqm 136.73 #REF!

207
 1 (BLD- White washing two coats with white cement to ceiling to
CSTN- give an even shade after thoroughly brushing the surface
11-5) to remove all dirt and remains of loose powdered
materials including cost of all materials , labour charges
and incidental such as scaffolding , lift charges etc., and
overheads & contractors profit complete for finished item
of work in all floors.

#REF! Sqm 54.58 #REF!

6 (BLD- Supply & application of one coat water based cement
CSTN- primer of exterior grade II and two coats of acrylic exterior
12-2& emulsion paint having VOC (Volatile Organic Compound)
Amend content less than 50 grams/litre for exterior walls including
ment in cost and conveyance of all materials to site, sales & other
SoR taxes, incidental, operational and all labour charges etc.,
2011- and overheads & contractors profit complete for finished
12) item of work in all floors.

#REF! Sqm 303.43 #REF!

1 (BLD- Painting to new iron work with one coat of Red oxide
CSTN- primer and two coats with synthetic enamel paint Grade-II
12-7 & VOC (Volatile Organic Compound) content less than 50
12-12- grams/litre over primer coat of red oxid, including cost and
197) conveyance of all materials like Red oxide
primer ,Synthetic Enamel Paint to site, sales & other
taxes, incidental, operational and all labour charges etc.,
and overheads & contractors profit complete for finished
item of work in all floors. (SS No. 1201, 1212 & 1207).

#REF! Sqm 221.26 #REF!

8 (BLD- Flooring with polished Shahabad / Tandur stone slabs of

CSTN- 15mm to 18mm thick set over a base coat of CM (1:8) ,
9-1) 12mm thick using screened sand over already laid CC bed
/ RCC roof slab including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per Sqm and jointed with
neat cement to full depth including cost and conveyance of
all materials like cement, sand, water, flooring stones etc.
complete including sales & other taxes on all materials
including all labour charges like dressing of flooring stones
to the required size, mixing of cement mortar, laying, lift
charges , cost of base coat, water charges etc., and
overheads & contractors profit complete for finished item
of work. (APSS No.703 & 701)

#REF! Sqm 792.05 #REF!

1 (BLD- Flooring with Rough Shahabad / Tandur stone slabs of 40
CSTN- mm thick set over base coat of cement mortar (1 : 8) 12
9-2) mm thick over CC bed already laid or RCC roof slab,
including pointing with cement mortar 1:3 duly filling joints
nearly, including cost of all materials like flooring stone,
cement, sand, and water etc., complete, including labour
charges for dressing of flooring stones etc., complete for
finished item of work,. (APSS No.703 & 701)

#REF! Sqm 809.61 #REF!

### (BLD- Flooring with (latoth) leather finish Tandur stone slabs of
CSTN- 18 to 22 mm thickset over a base coat of CM (1:8) ,
9-1) 12mm thick using screened sand over already laid CC bed
/ RCC roof slab including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per Sqm and jointed with
neat cement to full depth including cost and conveyance of
all materials like cement, sand, water, flooring stones etc.
complete including sales & other taxes on all materials
including all labour charges like dressing of flooring stones
to the required size, mixing of cement mortar, laying, lift
charges , cost of base coat, water charges etc., and
overheads & contractors profit complete for finished item #REF! Sqm 984.32 #REF!
12 (BLD- Flooring with Polished black Kadapa slabs minimum of
CSTN- 15mm thick of size 0.457m x 0.457m set over a base coat
9-1) of CM (1:8) , 12mm thick using screened sand over
already laid CC bed / RCC roof slab including neat cement
slurry of honey like consistency spread @ 3.3 Kgs per
Sqm and jointed with neat cement to full depth including
cost and conveyance of all materials like cement, sand,
water, flooring stones etc. complete including sales &
other taxes on all materials including all labour charges
like dressing of flooring stones to the required size, mixing
of cement mortar, laying, lift charges , cost of base coat,
water charges etc., and overheads & contractors profit #REF! Sqm 773.12 #REF!
208
 1 (BLD- Flooring with Rough black Kadapa slabs minimum of 50
CSTN- mm thick of size 0.457m x 0.457m set over base coat of
9-2) cement mortar (1 : 8) 12 mm thick over CC bed already
laid or RCC roof slab, including pointing with cement
mortar 1:3 duly filling joints nearly, including cost of all
materials like flooring stone, cement, sand, and water etc.,
complete, including labour charges for dressing of flooring
stones etc., complete for finished item of work,. (APSS
No.703 & 701)

#REF! Sqm 803.59 #REF!

1 (BLD- Flooring with 16 to 18mm thick high polished/leather
CSTN- finished granite stone slabs other than black and regular
9-7) colours (i.e. of shades like paradise / bala flower / copper
silk / laka red / lavender blue) with borders and
design ,finished as per the pattern approved by the
Engineer-in-Charge of length not less than 2.43 mts set
over base coat of cement mortar (1:8) , 20mm thick using
screened sand over CC bed already laid or RCC roof slab
including neat grey cement slurry of honey like
consistency spread @ 3.3 Kg per sqm and jointed neatly
with white cement paste mixed with pigment of matching
shade to full depth including cost and conveyance of all
materials like cement , sand , water , granite slabs etc., to
work site and all operational, incidental labour & lift
charges, polishing charges and all other taxes on all
materials, cost of base coat and overheads & contractors
profit complete for finished item of work (S.S.701 &
special)

#REF! Sqm 4,186.05 #REF!

### (BLD- Flooring with chequered cement concrete heavy duty tiles
CSTN- confirming to IS:13801 using aggregates, cement,
9-4) pigments of size 300mm x 300mm and thickness 25mm of
any shade as approved by Engineer - In - Charge set over
base coat of cement mortar (1:6), 12 mm thick using
screened sand over CC bed already laid or RCC roof slab
including neat cement slurry of honey like consistency
spread @ 3.3 kgs per sqm and jointed with neat white
cement to full depth mixed with pigment of matching
shade including cost and conveyance of all materials like
cement, sand, water and tiles etc., and overheads &
contractors profit complete for finished item of work.

#REF! Sqm 1,037.41 #REF!

1 (BLD- Providing polished Shahabad / Tandur stone slabs of
CSTN- 15mm to 18mm thick in single piece as specified set over
9-1) a base coat of CM (1:5) , 12mm thick using screened sand
over already laid CC bed / RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 Kgs
per Sqm and jointed with neat cement to full depth
including cost and conveyance of all materials like
cement, sand, water, flooring stones etc. complete
including sales & other taxes on all materials including all
labour charges like dressing of flooring stones to the
required size, flat nosing the edges, mixing of cement
mortar, laying, lift charges , cost of base coat, water
charges etc., and overheads & contractors profit complete
for finished item of work for treads and risers. (APSS
No.703 & 701)

Treads of 0.30m wide : #REF! Sqm 1,042.34 #REF!

7 (BLD- Providing polished Shahabad / Tandur stone slabs of
CSTN- 15mm to 18mm thick in single piece as specified set over
9-23) a base coat of CM (1:5) , 12mm thick using screened sand
over already laid CC bed / RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 Kgs
per Sqm and jointed with neat cement to full depth
including cost and conveyance of all materials like
cement, sand, water, flooring stones etc. complete
including sales & other taxes on all materials including all
labour charges like dressing of flooring stones to the
required size, flat nosing the edges, mixing of cement
mortar, laying, lift charges , cost of base coat, water
charges etc., and overheads & contractors profit complete
for finished item of work for treads and risers. (APSS
No.703 & 701)

Risers of 0.15m height : #REF! Sqm 864.45 #REF!

209
1 (BLD- Providing Treads with 16 to 18mm thick High Polished
CSTN- granite up to 8'-00 (2.43 M) other than black and regular
9-7) colours with borders and design as per the pattern
approved by the Engineer-in-Charge of length not less
than 2.43 mts set over base coat of cement mortar (1:5) ,
12mm thick using screened sand over CC bed already laid
or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment
of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational,
incidental labour & lift charges, half rounding the edges of
treads , polishing charges and all other taxes on all
materials, cost of base coat and overheads & contractors
profit complete for finished item of work for Treads
(S.S.701 & special)

Treads wide : #REF! Sqm 5,802.65 #REF!

1 Cemen Providing Risers to steps walls with High Polished Granite

t for 16 to 18 mm thick up to 8'-00 (2.43 M) other than black
jointing and regular colours length equal to flooring stone, set over
base coat of CM(1:5) 12 mm thick using screened sand
with cement slurry of honey like consistency spread at the
rate of 3.30 kgs per sqm and jointing with white cement
paste mixed with pigment of matching shade to full depth,
including cost of all materials like tiles, cement, sand and
water etc., and overheads & contractors profit complete for
finished item of work. for Risers-0.15 m(APSS No.701
&707)

Risers of 0.15m height : #REF! Sqm 3,887.11 #REF!

7 (BLD- Providing Coping with 16 to 18mm thick High Polished
CSTN- granite up to 8'-00 (2.43 M) other than black and regular
9-7) colours with borders and design as per the pattern
approved by the Engineer-in-Charge of length not less
than 2.43 mts set over base coat of cement mortar (1:5) ,
12mm thick using screened sand over CC bed already laid
or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and
jointed neatly with white cement paste mixed with pigment
of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water ,
granite slabs etc., to work site and all operational,
incidental labour & lift charges, half rounding the edges of
treads , polishing charges and all other taxes on all
materials, cost of base coat and overheads & contractors
profit complete for finished item of work for Coping 0.50 m
wide (S.S.701 & special)

#REF! Sqm 5,147.74 #REF!

7 (BLD- Providing skirting to internal walls to 10.00 cm height with
CSTN- Polished Shahabad/Tandur stone slabs 15mm to 18mm
9-23) thick, length equal to flooring stones set over base coat of
CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30
kgs per sqm and jointing with white cement paste mixed
with pigment of matching shade to full depth, including
cost of all materials like tiles, cement, sand and water etc.,
Rmt 86.45
-
9 (BLD- Providing skirting to internal walls to 10.00 cm height with
CSTN- Polished Kadapa stone slabs minimum of 15mm thick,
9-22) length equal to flooring stones set over base coat of
CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30
kgs per sqm and jointing with white cement paste mixed
with pigment of matching shade to full depth, including
cost of all materials like tiles, cement, sand and water etc.,
Rmt 84.55
2 (BLD- Providing cladding Granite to walls with High Polished
CSTN- Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than
9-19) black and regular colours, length equal to flooring slabs
set over base coat of CM(1:5) 12 mm thick using screened
sand with cement slurry of honey like consistency spread
at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement,
Rmt 3,752.22

210
### ( BLD- Supply and fixing of cement bonded board 8 mm thick and
CSTN- laying as per the pattern approved by the Engineer-in-
10-26 ) Charge on purlins, rafters, trusses, including cost and
conveyance of all materials like approved cement bonded
board, nails, labour charges , overheads and contractors
profit etc., complete for finished item of work in all floors.
excluding the cost of purlins, rafters, trusses.

Sqm 798.43
### BLD.C Providing and laying of best tiled roofing with pressed clay
STN- (Mangalore tiles) size 250 x 150 x 15 mm thick and laying
10.9 as per the pattern approved by the Engineer-in-Charge
on roofs jointed with cement mortar 1:4 (1 cement : 4
coarse sand) mixed with 2% integral water proofing
compound, laid over a bed of 20 mm thick cement mortar
1:4 (1 cement : 4 coarse sand) including Rabbit wire mesh
(Chicken mesh) of not less than 30 gauge and jointed
Sqm 1,086.47
13 Supply & fixing of Dressed Granite cubes of size of
100x100x100 mm for Heavy traffic areas the shapes and
designs as per the specification set over the 50 mm thick
sand bed with hand roller compaction with joint neatly in
homogeneous or heterogeneous pattern as the colour
and pattern shall be as per the drawings furnished by the
architect, including cost of all materials like cement, sand
water and tiles etc., complete for finished item of work
Sqm 2,890.35
9 As Per Supply of precast concrete blocks for paving of M-30
Data grade and thickness not less than 50 mm for Non- traffic
areas conforming to IS 15658:2006 in all shapes and
designs as per the manufacturer's specification set over
the 50 mm thick sand bed with hand roller compaction with
joint neatly in homogeneous or heterogeneous pattern as
the colour and pattern shall be as per the drawings
furnished by the architect, including cost of all materials
#REF! Sqm 820.74 #REF!
2 As Per Supply of precast concrete blocks for paving of M-35
Data grade and thickness not less than 60 mm for Light traffic
areas conforming to IS 15658:2006 in all shapes and
designs as per the manufacturer's specification set over
the 50 mm thick sand bed with hand roller compaction with
joint neatly in homogeneous or heterogeneous pattern as
the colour and pattern shall be as per the drawings
furnished by the architect, including cost of all materials
#REF! Sqm 867.10 #REF!
### As Per Supply of precast concrete blocks for paving of M-40
Data grade and thickness not less than 80 mm for Medium
traffic areas conforming to IS 15658:2006 in all shapes
and designs as per the manufacturer's specification set
over the 50 mm thick sand bed with hand roller
compaction with joint neatly in homogeneous or
heterogeneous pattern as the colour and pattern shall be
as per the drawings furnished by the architect, including
#REF! Sqm 1,052.53 #REF!
13 As Per Supply of precast concrete blocks for paving of M-50
Data grade and thickness not less than100 mm for Heavy traffic
areas conforming to IS 15658:2006 in all shapes and
designs as per the manufacturer's specification set over
the 100 mm thick sand bed with hand roller compaction
with joint neatly in homogeneous or heterogeneous
pattern as the colour and pattern shall be as per the
drawings furnished by the architect, including cost of all
#REF! Sqm 1,180.83 #REF!
2 As Per Supply and fabrication of MS framed structure like Window
Data Grills, Compound Wall Grills, Iron Doors, Windows, Gates,
MS Frame for chain link mesh works, Roof Trusses by
using square / rectangular MS hollow section as per IS
4923 including cost of welding rods, power charges,
labour charges for cutting, placing, welding and erecting in
position and fixing, cost & convenience of all materials
including wastage to site with all taxes and duties etc
#REF! kgs 123.73 #REF!
2 As Per Supply and fabrication of MS framed structure like Window
Data Grills, Compound Wall Grills, Iron Doors, Windows, Gates,
MS Frames for Chain link mesh, Roof Trusses by using
tubes & pipes MS hollow section as per IS 1161 including
cost of welding rods, power charges, labour charges for
cutting, placing, welding and erecting in position and
fixing, cost & convenience of all materials including
wastage to site with all taxes and duties etc complete for
#REF! kgs 142.36 #REF!

211
 4 CPWD Supply and laying of the C.C. pavement of V.R.C.C
16.75 Nominal Mix Concrete M 20 grade corresponding to IS
& 456 with minimum cement content of 350 kgs per 1 cum of
(BLD- concrete using CONCRETE MIXER with 20mm size HBG
CSTN- graded machine crushed hard granite metal (coarse
3-13- aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
C) Part 8) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc. including all
operational, incidental and labour charges.The design mix
concrete shall be laid and finished with screed board
vibrator , vacuum dewatering process and finally finished
by floating, brooming with wire brush etc. complete as per #REF! Cum 8,887.95 #REF!
4 (BLD- Providing casing embankment using gravel from
CSTN- approved area in layers of 25 cm with compaction
2-8) & including cost of all materials, machinery, labour, all
Amend operations such as materials transporting, spreading in
ment in layer of specified thickness, breaking clods, sectioning,
page compacting each layer without watering by Road roller 10
12 of tonne etc.,complete with initial lead up to 70.0 km and all
SoR lifts etc., include all incidental incomplete.
2014.1
5 #REF! Cum 558.60 #REF!
11 (BLD- Filling with carted gravel in trenches, sides of foundations
CSTN- and basement with initial lead in layers not exceeding
2-8) & 15cm thick, watering and ramming including cost and
Amend conveyance of water to work site and all operational,
ment in incidental, labour charges, hire charges of T&P etc., and
page overheads & contractors profit complete for finished item
12 of of work(APSS NO.309&310)
#REF! Cum 556.41 #REF!
1 (BLD- Filling with carted coarse sand in Children play area with
CSTN- initial lead in layers not exceeding 15cm thick, watering
2-8) & and ramming including cost and conveyance of water to
Amend work site and all operational, incidental ,labour charges,
ment in hire charges of T&P etc., and overheads & contractors
page profit complete for finished item of work(APSS
12 of NO.309&310)
#REF! Cum 1,208.51 #REF!
13 As per Supply and fixing of Vertical post 50x50x2.9mm thick M.S
data Square of 1.85m height each fixing at a distance of 2.0m
centre to centre, pit of 0.50x0.50x0.50m size in all soils ,
and PCC (1:4:8) for 0.50x0.50x0.10 m for pedestal of
0.50x0.50x0.40m size with VCC(1:3:6) using 20mm
graded metal for fixing the M.S Square Post duly welded
with 2 Nos of MS squares bar 12 mm of length 150 mm as
holdfasts for proper securing of M.S Square Post and
embedding in the VCC pedestal for 0.50m depth with clear
exposed M.S Square Post of 1.50m above bed level and
#REF! Sqm 1,792.26 #REF!
13 As Per Supply & Fixing Sadarhalli granite stone with 5 line
Lowest dressing Double Patti of 5' length seating benches with
Quotati Arm rest with back rest and its width 16'' with 3" thick
on and18" height with 3" thick and leg size 3'' width ,3' height
of ex showroom price . including cost and conveyance of
all materials like granite , cement to site loading , un
loading transport, sales & other taxes, incidental,
operational and all labour charges overheads &
contractors
For Benchesprofit etc., complete for finished item of work #REF! Nos. 15,200.00 #REF!
sub Total #REF!
### Provision for Illumination facilities @10% on sub total #REF!
### Provision for Irrigation facilities @ 7.5% on sub total #REF!
Total #REF!
Add GST @12% on Total #REF!
Add seigniorage Charges @ 0.6% on Total #REF!
Add Publication Charges @ 1% on TotaI #REF!
Provision for Third Party QC&A Charges @ 1% on TotaI #REF!
Add Tender premium / Escalation Charges @ 5% on Total #REF!
P.S and contingencies Charges @ 7.5% on Total #REF!
Add National academy of construction Charges @0.1% on Total #REF!
Unforeseen Items #REF!
Grand Total #REF!
#NAME?

212
 A.P. Greening and Beautification Corporation

Name of the Work:- Detailed estimate for External electrification & illumination Rejuvenation of Water Body at
Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT 2.0 )
Estimate Cost: Rs.23.49 Lakhs
Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
External electrification & illumination works

Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables 4 C x 4
ELEC- sq.mm of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc including cost
1
4.1.6 and conveyance of all materials ,overheads & contractors profit etc., Make: Torrent /
Universal / Unicab / Havells / KEI/ Polycab/ Gloster/ Orbit/Paragon/RR Kabel/RPG/Rhino

4C x 4 sq.mm PVC sheathed armoured cables 1 x 1 800.00 − − 800.00 Rmtrs 327.21 Rmt 261,768.96
Supply and Laying of U.G cables upto 50 Sq,mm including earth work excavation of trench
BLD- 300x600mm and ,laying the cable on sand cushion of 150 mm thick ,covering the cable with
ELEC Rough Kadapa slabs minimum of 40 mm thick and refilling the trench with the excavated
2 soils[excl. rock] , including cost and conveyance of all materials ,overheads & contractors
15-6-1
at 277 profit etc., complete for finished item of work

Laying of U.G cables 1x 1 800.00 − − 800.00 Rmtrs 199.66 Rmt 159,726.52

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN -
10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening
arrangement, including the supply of suitable boards with bakelite sheet as per IS
specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs heightPole
ELEC- having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12
3
6.1.4 mm and 4 Nos of M20 x 700 long 'J' bolts along with template, including cost and
conveyance of all materials ,overheads & contractors profit etc., complete for finished item of
work
Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/ Skipper/Consoul

7.50 Mtrs height Pole 1 x 4 − − − 4.00 Nos 15,726.59 Each 62,906.36

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN -
10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening
arrangement, including the supply of suitable boards with bakelite sheet as per IS
specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs heightPole
ELEC- having dimensions Bottom 155 mm,. Top 70mm with 3mm thick, base plate 260 x 260 x
4
6.1.5 16mm and 4 Nos of M24 x 750 long 'J' bolts along with template, including cost and
conveyance of all materials ,overheads & contractors profit etc., complete for finished item of
work
Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/ Skipper/Consoul

9.0 Mtrs height Pole 1x 2 − − − 2.00 Nos 22,733.23 Each 45,466.46

Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS
galvanized 40mm / 50mm dia Pipe. including cost and conveyance of all
ELEC- materials ,overheads & contractors profit etc., complete for finished item of work including
5
6.1.11 cost and conveyance of all materials ,overheads & contractors profit etc., complete for
finished item of work
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/Skipper/Consoul

1.50 Mtr Length Single Arm Bracket 1 x 12 − − − 12.00 Nos 1,738.31 Each 20,859.72
Supply and fabrication of street light poles made with medium quality MS Pipes of 88.90mm
OD for 1670mm long, 60.3mm OD Pipes of 1670 mm long and 42.4 mm OD for 1670 mm
long welded to each other for a total height of 5.0 m and providing 33.70 mm OD MS pipe
of 1000 mm long for arm bracket for Luminaires fixing welded to main pole at suitable angle,
suitable pole cap, base plate 300 x 300 x 10 mm and 4 Nos of 16 m dia 700 long 'J' bolts
As per along with template including cost of welding rods, power charges, labour charges for
6
data cutting, placing, welding and erecting in position, cost & convenience of all materials
including wastage to site, complete painting the total length of pipe with Painting to new iron
work with one coat of Red oxide primer and two coats with synthetic enamel paint Grade-II
VOC including cost of all materials ,labour charges etc for finished item of work.

5 m street light poles with Single arm bracket

1 x 40 − − − 40.00 Nos 4,972.13 Each
of 1 m length 198,885.33

Page 213 of 333

 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Fabrication, Transportation of 4 m Street light pole with hot-dip galvanized as per BSEN -
10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening
arrangement, including the Outdoor durable pure polyester powder coating for 4.0 Mtrs
height, Pole having 2 sections 1500 mm length 115 mm dia Bottom pipe and 2500 mm
length 75 mm dia Top pipe, base plate 250 x 250 x 12 mm, with decorative Double arm
bracket as directed by the Engineer- in-charge and 4 Nos of M16 x 450 long 'J' bolts along
As per with template, including cost and conveyance of all materials ,overheads & contractors profit
7 Quotati etc., complete for finished item of work
on

4 m street light poles with Double arm bracket

1 x 15 − − − 15.00 Nos 7,210.00 Each
of 1 m length 108,150.00
Supply and fixing of 120 W LED Street light Luminaire for existing street light pole,
Luminaire made of pressure diecast alluminium body with powder coated, having protective
toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having
System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66,
Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV,
In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts
AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as
required complete as per the direction of Engineer-in-charge and including cost of all
BLD- materials to site, incidental giving connections and all labour charges overheads &
8 ELEC contractors profit etc., complete for finished item of work
7-9-5 a) Luminaire Make : Wipro(Skyline) / Philips (Greenline
Extra) /GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/
Lumos-Super) / Havells (EnduraSeries)/Greenlites(HILux)/Capart
(Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium) /Eveready /Surya
(Pollux) / Fortune Art (Leaf)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

120 W.LED Street light Luminaire 1 x 6 − − − 6.00 Nos 13,008.01 Each 78,048.06
Supply and fixing of 90 W LED Street light Luminaire for existing street light pole,
Luminaire made of pressure diecast alluminium body with powder coated, having protective
toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having
System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66,
Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV,
In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts
BLD- AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as
9 ELEC required complete as per the direction of Engineer-in-charge and including cost of all
7-9-5 materials to site, incidental giving connections and all labour charges overheads &
contractors profit etc., complete for finished item of work
a) Luminaire Make : Wipro(Skyline) / Philips (Greenline
Extra) /GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/
Lumos-Super) / Havells (EnduraSeries)/Greenlites(HILux)/Capart
(Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium) /Eveready /Surya
(Pollux) / Fortune Art (Leaf)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.
90 W.LED Street light Luminaire 1x 8 − − − 8.00 Nos 10,185.81 Each 81,486.50

Supply and fixing of 45 W LED Street light Luminaire for existing street light pole,
Luminaire made of pressure diecast alluminium body with powder coated, having protective
toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having
System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66,
Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV,
In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts
AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as
required complete as per the direction of Engineer-in-charge and including cost of all
BLD- materials to site, incidental giving connections and all labour charges overheads &
10 ELEC contractors profit etc., complete for finished item of work.
7-9-5 a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) /GE- Venture /
Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells
(EnduraSeries)/Greenlites(HILux)/Capart (Premium)/Polycab/Keselec/ HPL(City
Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

45 W.LED Street light Luminaire 1x 70 − − − 70.00 Nos 5,482.15 Each 383,750.57

Page 214 of 333

 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Supply and transportation of 100 W LED Flood light Luminaire made of pressure diecast
aluminium housing with powder coated, having protective toughened glass, Supply Input
voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and
junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies
to IS 10322 (Part 5 / Sec-3), IK08, Driver surge protection 4KV, external Surge protection ≥
10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, ,
CCT: 3000K - 5700K, minimum CRI>70,etc., including as required complete as per the
BLD- direction of Engineer-in-charge and including cost of all materials to site, incidental giving
11 ELEC connections and all labour charges overheads & contractors profit etc., complete for
7-9-5 finished item of work a)
LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /Crompton/ Bajaj/Greenlites /
Havells/Capart(Premium) /Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya
(Lumasmax / O Flood)/ FortuneArrt (Fin)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG.

1 8.00
100 W LED Flood light Luminaire x 8 − − − Nos 11,387.86 Each 91,102.87
Supply and transportation of 16 Watt ISA LED Bollard made of mild steel, cadmium plated
and painted body colour grey, an acrylic protector sealed & tightened to the body to achieve
an optical tightness of IP 66, Efficacy - 55 lm/W, (CCT) - 3000K, CRI - 70, Control Gear
Tightness IP 44, IK 06, L70 @50,000 Hours, Dia140 mm,1000 mm length, 17.7 Kg
including as required complete as per the direction of Engineer-in-charge and including cost
of all materials to site, incidental giving connections and all labour charges overheads &
As per contractors profit etc., complete for finished item of work
12 Quotati Make: Justled/ Keselec / Equivalent,
on

16 W ISA LED Bollard 1x 4 − − − 4.00 Nos 21,000.00 Each 84,000.00

Supply and transportation of 3 Way TRIO LED Bollard made of Aluminium die cast with
LED SMD 2835 Chip of 50 LED x 0.25 W - 12W separate optical and control gear
compartment with IP66, IK 08, size 120mm x 120 mm and 900mm length, Overall luminous
efficiency of 60lm/W, CCT of 3500K, CRI >70, 50,000 hours at L70. Surge Protection
Device Standard 6kV, Power Factor: > 0.95, Current: 600ma, Body Color Dark Grey Texture
FInish. and including as required complete as per the direction of Engineer-in-charge and
As per including cost of all materials to site, incidental giving connections and all labour charges
13 Quotati overheads & contractors profit etc., complete for finished item of work Make: Justled/
on Keselec / Equivalent

12 W 3 Way LED Bollard 1x 8 − − − 8.00 Nos 5,668.00 Each 45,344.00

Supply and transportation of 3 Way TRIO LED Bollard made of Aluminium die cast with
LED SMD 2835 Chip of 50 LED x 0.25 W - 12W separate optical and control gear
compartment with IP66, IK 08, size 120mm x 120 mm and 900mm length, Overall luminous
efficiency of 60lm/W, CCT of 3500K, CRI >70, 50,000 hours at L70. Surge Protection
Device Standard 6kV, Power Factor: > 0.95, Current: 600ma, Body Color Dark Grey Texture
FInish. and including as required complete as per the direction of Engineer-in-charge and
As per including cost of all materials to site, incidental giving connections and all labour charges
14 Quotati overheads & contractors profit etc., complete for finished item of work Make: Justled/
on Keselec / Equivalent

12 W 6 Way LED Bollard 20 W 1x 8 − − − 8.00 Nos 5,668.00 Each 45,344.00

Supply and transportation of 9 Watt KEW SPIKE made of The luminaires have a body made
of aluminium & toughened glass protector , Efficacy - 75 lm/W*, (CCT) - 3000K, CRI - 70,
Control Gear Tightness IP 65, IK 05, L70 @ 50,000 Hours, Dia 212mm x100mm x 399mm,
1.14Kg and including as required complete as per the direction of Engineer-in-charge and
As per including cost of all materials to site, incidental giving connections and all labour charges
15 Quotati overheads & contractors profit etc., complete for finished item of work Make: Justled/
on Keselec / Equivalent,

Floor recessed lights 9 w 1x 6 − − − 6.00 Nos 3,200.00 Each 19,200.00

Page 215 of 333

 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
16 ELEC- Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical
6.1.31 pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with
providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing
with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field
engineers during execution including excavation of Earth/BT all labour charges and cost and
conveyance of materials etc.complete.

7.50 Mtrs height Pole 1 x 4 4.00

4.00 Nos 6,613.53 Each 26,454.12
17 ELEC- Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal /
6.1.32 Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with
providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing
with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field
engineers during execution including excavation of Earth/BT all labour charges and including
cost and conveyance of all materials ,overheads & contractors profit etc., complete.

9.0 Mtrs height Pole 1 x 2 2.00

2.00 Nos 8,908.55 Each 17,817.11

18 BLD- Foundation and erection charges with special T&P, for 5 Mtrs. Long MS / GI Garden pole
ELEC duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of
13.4.5 0.45Mtr x 0.45Mtrs x1.0 Mtr size pedestal with Vibrated Plain Cement Concrete M 20
Nominal mix with necessary steel (10kgs) reinforcement and curing for 7 days as directed by
the field engineers during execution including excavation of Earth/BT all labour charges and
cost and conveyance of materials etc including cost and conveyance of all
materials ,overheads & contractors profit etc., complete for finished item of work

4 m street light poles 1 x 55 55.00

55.00 Nos 2,993.67 Each 164,652.09

Supply and Wiring with 1 run of 3 core 1.50 Sqmm XLPE/PVC insulated & PVC sheathed
unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -
1988 etc in the existing pipes for main supply as required complete as per the direction of
BLD- Engineer-in-charge and including cost of all materials to site, incidental giving connections
19 ELEC- and all labour charges overheads & contractors profit etc., complete for finished item of
3.1.2 work
Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster /orbit / Paragon/ RR
Kabel/ RPG

3C x 2.5 sq.mm PVC sheathed unarmoured 1 x 1 400.00 400.00

400.00 Rmtrs 156.49 Rmtrs 62,596.00
Supply of 4 core 6.0 Sqmm PVC insulated and sheathed FRLS copper round cable for
voltage up to 1100V as per IS 694/1990. including cost and conveyance of all
ELEC- materials ,overheads & contractors profit etc., complete for finished item of work Makes: V-
20
1.5.5 Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art / /Sudhakar/Orbit/
Tamra/Anchor/Plaza/Vihan/Ollvin

4 core 6.0 Sq mm PVC insulated and sheathed

FRLS copper round cable 1 x 1 50.00 50.00
50.00 Rmtrs 386.29 Rmtrs 19,314.55
Supply and fixing of 1 No. 6-32A SP MCB 10KA C/D Curve ISI mark as required complete
as per the direction of Engineer-in-charge and including cost of all materials to site, incidental
BLD- giving connections and all labour charges overheads & contractors profit etc., complete for
21 ELEC- finished item of work.
4.4.1 Makes: V-Guard/Bonton /Finecab/ HPL / Million / FortuneArt /Sudhakar/Orbit/
Tamra/Anchor /Plaza/ Vihan/Spykaar/ Ollvin/Laser/Beljin/Rhino/ Standard/ Vimal

6-32A SP MCB 1 x 69 69.00 Nos 497.79 Each 34,347.71

Supply of Automatic Street Light Control System with Optical Micro Sensor, Low volatage /
High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable
SMC enclousure of IP 54 protection, MCBs and contactor suitable to control the load of 5
ELEC- KW of Three phase load with necessary clamping arrangements.
22
3.5.2 Make: Swadeep Nature Switch / Light Mate /GL/Bajaj

Automatic Street Light Control System 1 x 2 − − − 2.00 Nos 18,496.52 Each 36,993.05

Page 216 of 333

 Rate Per
Sl.N Item Amount
Description of Item Nos. L B D QTY Unit Unit (in Unit
o Code (in Rs.)
Rs.)
Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet
after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus
bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for
ELEC- energy
23
6.1.24 meter etc., complete for finished item of work..FP MCB including cost and conveyance of
all materials ,overheads & contractors profit etc., complete for finished item of work
FP MCB make :Legrand / Schnieder / L&T

suitable out door type feeder piller box 1 x 2 − − − 2.00 Nos 24,471.53 Each 48,943.07
Providing Independent earthing by excavating atrench to a depth f 2.10m in ordinary soils as
specified 1.50 X 0.6 to a depth of 0.9m and 1.2 X 0.6 to a depth of 1.20m ,using 40 mm dia
BLD- 'B' class GI Pipe of 2.5 m long with necessary accessories with 450mm x 50 mm thick hume
24 ELEC. pipe ring duly providing staggered holes including filling with 40 kg of hard coke and 20
5-1-1 kg salt providing with equal proportion of in layers etc. including cost and conveyance of all
materials ,overheads & contractors profit etc., complete for finished item of work

Independent earthing 0 x 3 − − − 0.00 Nos 4,369.01 Job -

Provisions for under water fountain light , focus light for statue
25 LS

Total 2,097,157.05

Add GST @12% on SubTotal 251,658.85

Add unforeseen items
Grand Total 2,348,815.90
#NAME?

Page 217 of 333

 D A T A ( SOR 2022-23)
A.P. Greening & Beautification Corporation
A Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres)
in GVMC , Visakhapatnam District Andhra Pradesh. ( AMRUT
2.0 )
Zone - VI

B Sources and Leads

Material Quarry Lead in KM
1 Cement
2 Steel
Nagavali,
3 Sand for concrete Srikakulam 118.00
Nagavali,
4 Sand for mortar, plastering Srikakulam 118.00

Sand for filling Padmanabham

5 42.00
6 Second Class Bricks Maddi 25.00
7 Fly ash bricks 290 x 225 x 140 NA 0.00
8 Fly ash bricks 290 x 100 x 140 NA 0.00
9 Fly ash bricks 225 x 100 x 60 NA 0.00
10 40mm HBG Metal Machine crushed Kurapalli 30.00
11 20mm HBG Metal Machine crushed Kurapalli 30.00
12 12mm HBG Metal Machine crushed Kurapalli 30.00
13 10mm HBG Metal Machine crushed Kurapalli 30.00
14 6mm HBG Metal Machine crushed Kurapalli 30.00
15 Rough Stone OTG Kurapalli 30.00
16 Rough Stone HBG Kurapalli 30.00
17 Gravel S R Puram 21.00
18 Shahabad stone slabs NA 0.00
19 Kadapa stone slabs NA 0.00

Cement SOR 22-23

C
Cement: OPC 43 Gr/53 Gr
MAT-00005 Note: Rate as fixed by the Government 4220.00 tonne (1000 KGS )
exclusive of GST
D Steel Rates Febraury 2023
1 Fe - 500 63,000.00

2 Fe- 415 60,000.00

3 Mild Steel, Structural Steel 60,000.00

-

4 M.S Flats 60,000.00

7 M.S Plates 70,000.00
E Allowances
 1 MA @ 40% 0.40
Overheads & Contractors Profit @13.615% 0.13615
2

F Water charges
MAT-00333 Type of Habitation 2 1 for Rural 95.00
MAT-00332 2 for Urban 125.00
 D A T A ( SOR 2022-23)
Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC , Visakhapatnam
Andhra Pradesh. ( AMRUT 2.0 )

Estimate Input

Name of park Acres location

Rejuvenation of Water Body at Akkireddypalem 1.23 in GVMC

Red soil
1 900.00 Cum

cost & conveyance of dry cow dung powder and

FYM as per Vishakhapatnam Circle-FSR 22-23 Vishakhapatna
2 (Code: 05-35-6) 1757.54 Cum m Circle-FSR
22-23 (Code:
05-35-6)

Mangalore tiles size L B Thick

thick and laying as per the pattern approved by the
Input Engineer-in-Charge on roofs jointed with cement mortar 225 150 20
1:4 (1 cement : 4 coarse sand) mixed with 2% integral
water
Supplyproofing
& Fixingcompound,
Sadarhalli laid overstone
granite a bedwith
of 20 mm thick
5 line
Input dressing Double Patti of 5' length seating benches with
back rest and its width 16'' with 4" thick and 18" height
with 4" thick and leg size 4'' width, including cost and
Supply and fixing of C.C. Kerb not less than M30 strength
of size 600 X 400 X 110 mm thick with bottom thickness of
110 mm up to height of 350 mm and top width of 50 mm
thick chamfering with 45° at starts at 350 mm height to
400 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC
Bed in position to the required line, level and curvature
jointed with cement mortar 1:3 (1 cement : 3 coarse sand),
Input 0.6 0.4 0.11
including making joints with or without grooves (thickness
of joints except at sharp curve shall not to more than 5
mm), including making drainage opening wherever
required and including cost and conveyance of all
materials & labour charges including transportation from
approved source, loading & unloading charges including
contractor profit & overhead charges complete for finished
item of work..

C.C. Kerb in put

Supply and fixing of C.C. Kerb not less than M30 strength
Srikakulam 466.670 Rmt
1 of size 600 X 400 X 110 mm thick with bottom thickness of
110 mm up to height of 350 mm and top width of 50 mm
thick chamfering with 45° at starts at 350 mm height to Vizianagaram 466.670 Rmt
2 400 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC
Bed in position to the required line, level and curvature
jointed with cement mortar 1:3 (1 cement : 3 coarse sand),
including making joints with or without grooves (thickness Visakapatnam 466.670 Rmt
N_Z
of joints except at sharp curve shall not to more than 5
3 mm), including making drainage opening wherever
required and including cost and conveyance of all
materials & labour charges including transportation from
approved source, loading & unloading charges including
contractor profit & overhead charges complete for finished East Godavari 466.670 Rmt
item of work..

4
 Supply and fixing of C.C. Kerb not less than M30 strength
of size 600 X 375 X 100 mm thick with bottom thickness of West Godavari 475.000 Rmt
5 100 mm upto height of 300 mm and top width of 50 mm
thick chamfering with 45° at starts at 300 mm height to
375 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC Krishna 430.000 Rmt
6 C_Z Bed in position to the required line, level and curvature
jointed with cement mortar 1:3 (1 cement : 3 coarse sand),
including making joints with or without grooves (thickness
of joints except at sharp curve shall not to more than 5
Guntur 458.000 Rmt
mm), including making drainage opening wherever
required and including cost and conveyance of all
7 materials & labour charges including transportation from
Supply and fixing of C.C. Kerb not less than M30 strength
of size 600 X 400 X 110 mm thick with bottom thickness of Prakasam 535.000 Rmt
8 110 mm up to height of 350 mm and top width of 50 mm
thick chamfering with 45° at starts at 350 mm height to
400 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC
Bed in position to the required line, level and curvature
jointed with cement mortar 1:3 (1 cement : 3 coarse sand), Nellore 535.000 Rmt
including making joints with or without grooves (thickness
S_Z-2 of joints except at sharp curve shall not to more than 5
9 mm), including making drainage opening wherever
required and including cost and conveyance of all
materials & labour charges including transportation from
approved source, loading & unloading charges including
contractor profit & overhead charges complete for finished
Chittoor 400.000 Rmt
item of work.

10
Supply and fixing of C.C. Kerb not less than M30 strength
of size 450 X 450 X 110 mm thick with bottom thickness of Anantapur 533.000 Rmt
11 110 mm up to height of 380 mm and top width of 50 mm
thick chamfering with 45° at starts at 380 mm height to
450 mm height as selected by the Engineer-in-charge
from approved source/ factory which is laid on existing CC Kurnool 488.000 Rmt
12 Bed in position to the required line, level and curvature
S_Z-1 jointed with cement mortar 1:3 (1 cement : 3 coarse sand),
including making joints with or without grooves (thickness
of joints except at sharp curve shall not to more than 5
mm), including making drainage opening wherever Kadapa 577.000 Rmt
required and including cost and conveyance of all
materials & labour charges including transportation from
13 approved source, loading & unloading charges including
contractor profit & overhead charges complete for finished

AMRUT -2017-20
 Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants
as per directions of officer in charge at site including cost of plants
plants of bag size
7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet,
18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is
0.75'' and above,
1 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the
stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip,
healthy foliage without any infestation and the plants shall be supplied after proper
hardening off.
the rates inclusive of cost of plants and labour charges for handling & complete for finished
item of work.

plants of Rs.
bag size

lawn

1 For paspalum grass Sqm Rs. 100

2 For Korean grass Sqm Rs. 200

Ground cover
3 Ground covers 4" x 7" Rs. 20
Hedge /shrub plants
4 Hedge / shrubs 7" x 8" Rs. 30
5 Hedge / shrubs 8" x 10" Rs. 45
6 Hedge / shrubs 13" x 13" Rs. 100
Palms/Tree planting
7 For tall plants 15" x 16" Rs. 200
8 For tall plants 18" x 18" Rs. 450
9 For tall plants 21" x 21" Rs. 750
8 For tall plants 25" x 25" Rs. 1200
9 For tall plants 30" x 30" Rs. 1500

5 DATA for Farmyard Manure- Rate per Cum Districts

 cost &
conveyance
Gunter-Circle :
of dry cow
Nellore,
dung powder
Prakasam ,
and FYM as Gunter-Circle-FSR 22-23 (Code: 02-23-008) 1496.71 Guntur ,
per Gunter-
Krishna West
Circle-FSR
Godavari ,
22-23 (Code:
02-23-008)
i

cost &
conveyance
of dry cow
dung powder
and FYM as Rajahmundry
per
Rajahmundry Circle-FSR 22-23 (Code: 2-5-19) 455.0 Circle -
Rajahmundry
Circle-FSR
22-23 (Code:
2-5-19)
ii

cost &
conveyance
of dry cow
Vishakhapatna
dung powder
m Circle-
and FYM as
Srikakulam ,
per Vishakhapatnam Circle-FSR 22-23 (Code: 05-35-6) 1757.5 Vizianagaram ,
Vishakhapat
Vishakhapatna
nam Circle-
m ,East
FSR 22-23
Godavari,
(Code: 05-
35-6)
iii
cost &
conveyance
of dry cow
dung powder Anantapuram
and FYM as Circle-
per
Anantapuram Circle-FSR 22-23 (Code: 04-28-005) 2486.43 Anantapur ,
Anantapuram Chittoor
Circle-FSR
22-23 (Code:
iv 04-28-005)

cost &
conveyance
of dry cow
dung powder Kurnool Circle
and FYM as Kurnool Circle -FSR 22-23 (Code: 02-14-008) 2281.63 - Kurnool ,
per Kurnool kadapa
Circle -FSR
22-23 (Code:
02-14-008)
v

Transport Charges Calucation for Estimate Purpose-16-17

Districts RS/MT
1 Srikakulam 1500
2 Vizianagaram 1400
3 Vishakhapatnam 1200
kadiya 4 East Godavari 1000
5 West Godavari 1200
6 Krishna 1300
7 Guntur 1350
8 Prakasam 1400
9 Nellore 1500
 10 Chittoor 1700
11 kadapa 1600
12 Kurnool 1650
13 Anantapur 1800

Name of the
Sl. No. District Name of the ULB Rs. -----/Cum

1 2 3
Central Zone
1 West GodavarBhimavaram 802.00
2 Eluru 598.00
3 Tadepalligudem 670.00
4 Krishna Gudivada 1066.00
5 Machlipatnam 718.00
6 Vijayawada 1054.00
7 Guntur Chilkaluripeta 1030.00
8 Guntur 670.00
9 Narasaraopeta 1042.00
10 Tenali 0.00
North Zone
11 Srikakulam Srikakulam 1030.00
12 Vizianagaram Vizianagaram 838.00
13 Visakhapatna Visakhapatnam 0.00
14 East GodavariKakinada 1030.00
15 Rajahmahendravaram 1030.00
South Zone - 1
16 Kadapa Kadapa 626.80
17 Proddatur 626.80
18 Kurnool Kurnool 670.00
19 Nandyal 598.00
20 Adoni 670.00
21 Anantapur Anantapur 0.00
22 Tadipatri 583.60
23 Guntakal 1042.00
24 Hindupuram 1042.00
25 Dhramavaram 626.80
South Zone - 2
26 Prakasam Ongole 670.00
27 Nellore Nellore 1042.00
28 Kavali 1042.00
29 Chittoor Chittoor 626.80
30 Srikalahasti 790.00
31 Tirupati 670.00
32 Madanapalle 598.00

Multi activity play system (MAPS 10) 1 -Set 438,219.00 1 10

Convention
FOUR SEATER SWING 36,225.00 1 26
al Play
Equipment (
6 - Nos) 1 - SEATER ARC SWING 80,101.00 1 0
Set
BRIDGE LADDER SCRAMBLER 36,242.00 1 6
 Equipment (
6 - Nos) 1 -
Set

NET ROCK SCRAMBLER 56,668.00 1

Outdoor fitness equipment's (10-No's) -Set 1

BOQ's Input

1 Site filling with gravel for level grading 1620 CUM 120

2 C.C Kerb on both sides 410 Rmt

3 Construction of brick Toe wall for Plaza - 0 Rmt

Entrance plaza and path ways flooring with

4 0 Sqm
granite stone 18 mm thick -

Path ways and Seating plazas flooring with

5 0 Sqm
Shahabad / Tandur stone of 40 mm thick slabs -
Plaza flooring with Rough black Kadapa stone
6 0 Sqm
of 50 mm thick slabs -

pathways flooring with Cobble stone( size100 x

7 0 Sqm
100 x 100 mm) -

Pathway flooring with 60 mm thick CC pavers -

8 860 Sqm 344
860 Sqm

9 Internal pathways flooring with chequered tiles - 0 Sqm

VDF concrete pavement 100 mm thick in

10 0 Sqm
parking area -

Murrum pathway with 150 mm thick gravel bed

11 2200 Sqm
- 2200 Sqm

MultiPlay court area with 150 mm thick gravel

12 0 Sqm
bed-

13 Seating area with 150 mm thick gravel bed- 0 Sqm

Sadarhalli granite seating benches with back rest

13 18 No.s
-

14 Kadapa slab (rough) 50mm thick stone edging - 170 Rmt

15 Construction of Planter Seater wall 235 Rmt 235 Rmt

Construction of M.S Gazebo of size 4.0 x 4.0 m -

16 1.0 Nos
1 No.s

Construction of Security / ticket room of size 3.0

17 1.0 Nos
m X 3.0 m
 Civil works for fixing children play Equipment
18 10-No's (1 sets) in 450 sqm area with Sand 10.0 Nos 45
filling.

Supply, delivery and commissioning of 10-No's

19 10.0 Nos
Conventional Play Equipment (1 sets)

20 Multi Activity Play Equipment 0.0 Nos

Civil works for fixing Outdoor fitness

21 10.0 Nos 18
equipment's 10-No's (1 sets) in 180 sqm area.

Supply, delivery and commissioning of 10 - No's

22 10.0
Outdoor fitness equipment's (1 sets)

23 Construction of Stage 7 m x 4 m. 28.0 Sqm 7

Construction of M.S pergola of size 6.0 x 3.0 m -

24 2.0 Nos
2 No.s
Construction of Entrance Gate of size 4.0 m x 2.0
25 1.0 Nos
m
Construction of Entrance Arch with Gate of size
26 5.5 m x 2.30 m and 2 Wicket Gates size of 1.60 1.0 Nos
m x 2.0 m height
Construction of see through compound wall - 320
27 320.0 Rmt
Rmt

28 Construction of Water body 155.0 Sqm

29 Stone pitching along the bund - 3150 Sqm 3150.0 Sqm 700.00

Fixing of Chain-link fabric-640 m with 1.8 m

30 640.0 Rmt 1600.00
height

Kadapa stone Kerb along the pathways - 0 Rmt 0 Rmt

29 Provision for minimum external electrification 300,000.00 13.0%

30 Provision for Irrigation facilities 250,000.00 5.0%

Sub Total - I (Hardscape works)

Softscape (Development & one year

1 Month
Maintenance)
31 Shade Lawn area - 234 Sqm 234.00 Sqm 39
Developmen
t and
maintenance
32 of Lawn area Lawn area - 160 Sqm 160.00 Sqm 16
for one year

33 10 0.00 Sqm
Shrub planting/ Hedge - 186 Sqm
6 186.00 Sqm 186

34 22 Ground covers / Flower beds - 450 Sqm 450.00 Sqm 900

35 0.00 No.s 0
Trees - 142 No.s
36 142.00 No.s 142
9 m light poles
2 Nos
120 w LED
4 Nos
7.5 m light poles
2 Nos 0.5 ac. for 1pole
100 w LED
4 Nos
POLE LIGHT - 4M HIGH
35 Nos
20 w LED
35 Nos
n GVMC , Visakhapatnam District

district MA @ --%

Visakhapatnam 0.40

Plants/
1000.00 month

Vishakhapatna
7957.88 m Circle-FSR
22-23 (Code:
05-42-11)
No. of tiles rquired
(10/ L x B )= Ans + Rs.
Ans10%
326 32.00

15000.00

466.670
 15800.00

15800.00

15800.00

38.00 11500.00

26.00 12000.00

32.00 12500.00
 Supply &
Delivery of
trees / Palms /
shrubs and
specified
vers and specified plants plants as per
directions of
officer in
charge at site,
all the plants
supplied shall
be with sturdy
stem, well
formed crown,
vigorously
growing tip,
tom dia of the stem is healthy foliage
without any
infestation and
n 7 feet, bottom dia of the the plants
shall be
supplied after
proper
n, vigorously growing tip, hardening off.
the rates
lied after proper inclusive of
cost of plants
and labour
g & complete for finished charges for
handling &
loading,
complete for
finished item
of work.
Approximat
e weight of
Per plants of
bag size in
Kgs

Sqm 2

Sqm 30

Each 1

Each 2
Each 4
Each 10

Each 20
Each 35
Each 50
Each 125
Each 150

Watering by pipe, 1000 Nos/per

weeding month
 Gunter-Circle-FSR
22-23 (Code: 04-32- 9989.32
040)

Rajahmundry Circle-
FSR 22-23 (Code: )

Vishakhapatnam
Circle-FSR 22-23 7957.88
(Code: 05-42-11)

Anantapuram Circle-
FSR 22-23 (Code: 10206.06
04-32-011)

Kurnool Circle -FSR

22-23 (Code: 04-32- 10201.61
057)

700
800
800
 1700
1700
1600
1700

36

10
45 0.3

2.5
 10 450

10 180

4 28

4.50 3150

1.80 2880

1,565,425.00

602,087.00
 6 234

10 160

0.75 0

1 186

0.5 450

For tall plants

Trees

#REF!

5 ac. for 1pole #REF!

#REF!
 A.P. Greening and Beautification Corporation
D A T A ( SOR 2022-23)
Name of the Work :- Rejuvenation of Water Body at Akkireddypalem ( 1.23 Acres) in GVMC ,
Visakhapatnam District Andhra Pradesh. ( AMRUT 2.0 )
Sl.
CFMS CODE Description Quantity Unit Rate (Rs.) Per Unit Amount (Rs.)
No.
Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables 4 C x 4 sq.mm of 1.1
KV grade with copper conductor as per IS 7098 Part-I -1988 etc including cost and conveyance of all
1 ELEC-4.1.6 materials ,overheads & contractors profit etc., Make: Torrent / Universal / Unicab / Havells / KEI/ Polycab/
Gloster/ Orbit/Paragon/RR Kabel/RPG/Rhino

Rate as per SOR 1.00 Rmt 288.00 1.00 Rmt 288.00

Overheads & Contractors Profit 0.13615
@13.615%
288.00 39.21
Rate for 1 Rmt 327.21
Supply and Laying of U.G cables upto 50 Sq,mm including earth work excavation of trench 300x600mm
and ,laying the cable on sand cushion of 150 mm thick ,covering the cable with Rough Kadapa slabs
BLD-ELEC minimum of 40 mm thick and refilling the trench with the excavated soils[excl. rock] , including cost and
2
15-6-1 at 277 conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work

Data for 100 Rm

A. MATERIALS :
(BLD-CSTN-2-1)Earth work 100*0.3*0.6 18.00 cum 267.54 1 cum 4815.72
BMT-B.01 Rough Kadapa slabs minimum of 40
mm thick 30.0 Sqm 1250.00 10 sqm 3750.00
Sand for cushion 4.50 cum 1024.00 1 cum 4608.00
B. LABOUR
Mazdoor for sand filling, refilling 2.5 Nos. 525.00 1 Each 1312.50
skilled electrician 1 Nos. 700.00 1 Each 700.00
helper 2.00 Nos. 565.00 1 Each 1130.00
MA @ 40% 0.40 3142.50 1257.00
17573.22
Overheads & Contractors Profit 0.13615 17573.22 2392.59
@13.615%

Rate for 100 RM 19965.81

Rate for 1 RM 199.66
Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S
355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of
suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180
KMPH for 7.50 Mtrs heightPole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base
3 ELEC-6.1.4 plate 220 x 220 x 12 mm and 4 Nos of M20 x 700 long 'J' bolts along with template, including cost and
conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work
Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/ Skipper/Consoul

Rate as per SoR 1.00 Nos 13,842.00 1.00 Nos 13,842.00

Overheads & Contractors Profit 0.13615
@13.615% 13842.00 1884.59
Rate for 1 Nos 15,726.59
Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S
355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of
suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180
KMPH for 9 Mtrs heightPole having dimensions Bottom 155 mm,. Top 70mm with 3mm thick, base plate
4 ELEC-6.1.5 260 x 260 x 16mm and 4 Nos of M24 x 750 long 'J' bolts along with template, including cost and
conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work
Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/ Skipper/Consoul

Rate as per SoR 1.00 Nos 20,009.00 1.00 Nos 20,009.00

 Overheads & Contractors Profit 0.13615
@13.615% 20009.00 2724.23
Rate for 1 Nos 22733.23
Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly
erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x
0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs)
5 ELEC-6.1.31 reinforcement and curing for 7 days as directed by the field engineers during execution including
excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete.

Rate as per sor 1.00 Nos 5,821.00 1.00 Job 5,821.00

Overheads & Contractors Profit 0.13615
@13.615% 5821.00 792.53
Rate for 1 Job 6613.53
Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole
duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x
0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs)
6 ELEC-6.1.32 reinforcement and curing for 7 days as directed by the field engineers during execution including
excavation of Earth/BT all labour charges and including cost and conveyance of all materials ,overheads &
contractors profit etc., complete.
Rate as per SoR ELEC-6.1.31 1.00 Nos 7,841.00 1.00 Job 7,841.00
Overheads & Contractors Profit 0.13615
@13.615%
7841.00 1067.55
Rate for 1 Job 8908.55
Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized
40mm / 50mm dia Pipe. including cost and conveyance of all materials ,overheads & contractors profit
etc., complete for finished item of work including cost and conveyance of all materials ,overheads &
7 ELEC-6.1.11 contractors profit etc., complete for finished item of work
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/Skipper/Consoul

Rate as per SoR 1.00 Nos 1,530.00 1.00 Nos 1,530.00

Overheads & Contractors Profit 0.13615
@13.615% 1530.00 208.31
Rate for 1 Nos 1738.31
Fabrication, Transportation and supply of 1.0 Mtr Length Double Arm Bracket made with MS galvanized
40mm / 50mm dia Pipe. including cost and conveyance of all materials ,overheads & contractors profit
8 ELEC-6.1.13 etc., complete for finished item of work including cost and conveyance of all materials ,overheads &
contractors profit etc., complete for finished item of work
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/Skipper/Consoul

Rate as per SoR 1.00 Nos 1,895.00 1.00 Nos 1,895.00

Overheads & Contractors Profit 0.13615
@13.615% 1895.00 258.00
Rate for 1 Nos 2153.00
Supply and Fixing street light poles made with medium quality MS Pipes of 76.1mm OD for 1.20 m long,
60.3mm OD Pipes of 1.30 m long and 48.3mm OD for 1.50 m long welded to each other for a total height
of 4.0 Rmt and providing 48.3mm OD MS pipe of 0.450 m long for arm bracket for Luminaires fixing
9 As per data welded to main pole at suitable angle ,including base plat of 0.15m x 0.15 m with 5 mm thick along with 4
No’s of J- bolt 0.3 m length and painting the total length of pipe with two coats of synthetic enamel paint
over red oxide primer coat including cost of all materials ,labour charges etc complete.

Unit : 1 Job
MS Pipes
MS Pipe section OD 76.1mm with 3.6 7.72 Kg
mm thick @ 6.44 kg/Rmt for (1.12 m x
6.44 =7.72 Kgs )
MS Pipe section OD 60.3 mm with 3.6 6.54 Kg
mm thick @ 5.03 kg/Rmt for (1.30 m x
5.03 =6.54 Kgs )
 MS Pipe section OD 48.3 mm with 3.2 5.34 Kg
mm thick @ 3.56 kg/Rmt for (1.5 m x
3.56 =5.34 Kgs)
MS Pipe section OD 48.3 mm with 3.2 1.60 Kg
mm thick @ 3.56 kg/Rmt for arm
bracket (0.45 m x 3.56 =5.34 Kgs)
BMT-F-04 Total kgs for 4.0 m pole 21.20 Kg 76.00 1.00 Kg 1611.20
Part-I (46) J- Bolts 30 cm long 4.00 Nos 37.00 1 Nos 148.00
Base plat 150 x 150 x 5 mm thick @ 0.86 Kg 70.00 1 Kg 60.20
39.2 kg / sqm (0.150x 0.150 = 0.22 x
39.2 =0.86 kg
BMM-V.16 Fabrication charges 21.20 Kg 30.00 1.00 Kg 636.00
BMM-V.15 Erections charges 21.20 Kg 6.00 1.00 Kg 127.20
MA @ 40% 0.40 127.20 50.88
Painting to new iron work with one
(BLD-CSTN- coat of Red oxide primer and two coats
12-7 & 12-12- with synthetic enamel paint Grade-II
197) VOC for Pole
MS Pipe section OD 76.1mm for (1.06 0.29 Sqm
m x 3.141 x 0.0761 =0.250 sqm)
MS Pipe section OD 60.3 mm for (1.37 0.25 Sqm
m x 3.141 x 0.0603 =0.260 sqm )
MS Pipe section OD 48.3 mm for (1.5 0.23 Sqm
m x 3.141 x 0.0483 =0.253 sqm )
MS Pipe section OD 48.3 mm for (0.45 0.11 Sqm
m x 3.141 x 0.0483 =0.11 sqm )
Total painting area 0.88 Sqm 194.74 1.00 Sqm 171.37
2804.85
Overheads & Contractors Profit 0.13615 2804.85 381.88
@13.615%
Rate per Job 3186.73

Supply and transportation of 120 W LED Flood light Luminaire made of pressure diecast alluminium
housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees
protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge
protection 4KV, In house additional Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10%
at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete
10 ELEC-3.8.27 including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished
item of work a) LUMINAIRE MAKE : Wipro / Philips/ GE-
Venture / Crompton/ Bajaj/Greenlites / Havells/Capart(Premium) /Halonix/
Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood)/ FortuneArrt (Fin)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG..

Rate as per SOR 1.00 Nos 12337.00 1.00 Each 12337.00

Overheads & Contractors Profit 0.13615
@13.615% 12337.00 1679.68
14016.68
 Supply and transportation of 100 W LED Flood light Luminaire made of pressure diecast alluminium
housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees
protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge
protection 4KV, In house additional Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10%
at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete
8 ELEC-3.8.27 including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished
item of work a) LUMINAIRE MAKE : Wipro / Philips/ GE-
Venture / Crompton/ Bajaj/Greenlites / Havells/Capart(Premium) /Halonix/
Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood)/ FortuneArrt (Fin)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG..

Rate as per SOR 1.00 Nos 9522.00 1.00 Each 9522.00

Overheads & Contractors Profit 0.13615
@13.615% 9522.00 1296.42
10818.42
Supply and transportation of 20 LED Street light Luminaire made of pressure diecast alluminium body
with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees
protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection
4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC,
driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including cost and conveyance of
all materials ,overheads & contractors profit etc., complete for finished item of work
9 ELEC-3.8.23 a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) /GE-Venture / Crompton(Neo Series) / Bajaj (Edge) /Halonix(Lumos - Super) / Havells (Endura
Series)/Capart(Premium)/Greenlites(Hi-Lux)/Polycab/Keselec/HPL(City Vision)/Jaquar
(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG

Rate as per SOR 1.00 Nos 1822.00 1.00 Each 1822.00

Overheads & Contractors Profit 0.13615
@13.615% 1822.00 248.07
Rate for 1 Each 2070.07
Supply and transportation of 45 LED Street light Luminaire made of pressure diecast alluminium body
with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees
protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection
4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC,
driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including cost and conveyance of
10 ELEC-3.8.23 all materials ,overheads & contractors profit etc., complete for finished item of work
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) /GE-Venture / Crompton(Neo Series) / Bajaj (Edge) /Halonix(Lumos - Super) / Havells (Endura
Series)/Capart(Premium)/Greenlites(Hi-Lux)/Polycab/Keselec/HPL(City Vision)/Jaquar
(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG

Rate as per SOR 1.00 Nos 4324.00 1.00 Each 4324.00

Overheads & Contractors Profit 0.13615
@13.615% 4324.00 588.71
Rate for 1 Each 4912.71
 Supply and transportation of 60 LED Street light Luminaire made of pressure diecast alluminium body
with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees
protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection
4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC,
driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including cost and conveyance of
10 ELEC-3.8.23 all materials ,overheads & contractors profit etc., complete for finished item of work
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green
line) /GE-Venture / Crompton(Neo Series) / Bajaj (Edge) /Halonix(Lumos - Super) / Havells (Endura
Series)/Capart(Premium)/Greenlites(Hi-Lux)/Polycab/Keselec/HPL(City Vision)/Jaquar
(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG

Rate as per SOR 1.00 Nos 5428.00 1.00 Each 5428.00

Overheads & Contractors Profit 0.13615
@13.615% 5428.00 739.02
Rate for 1 Each 6167.02
Supply and transportation of 90 LED Street light Luminaire made of pressure diecast alluminium body
with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90,
high power LED's System efficacy >110 lm/W and junction temprature < 70°C, with Ingrees protection
IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection
4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC,
driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete including cost and
conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work
11 ELEC-3.8.24 a) Luminaire Make : Wipro(Skyline) / Philips
(Greenline Extra) /GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/
Lumos-Super) / Havells (EnduraSeries)/Greenlites(HILux)/Capart (Premium)/Polycab/Keselec/ HPL(City
Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

Rate as per SOR 1.00 Nos 8464.00 1.00 Each 8464.00

Overheads & Contractors Profit 0.13615
@13.615% 8464.00 1152.37
Rate for 1 Each 9616.37
Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank
process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper
cable for internal wiring, contactor, connectors and provision for energy
12 ELEC-6.1.24 meter etc., complete for finished item of work..FP MCB including cost and conveyance of all
materials ,overheads & contractors profit etc., complete for finished item of work
FP MCB make :Legrand / Schnieder / L&T

Rate as per SOR 1.00 Nos 21,539.00 1.00 Job 21,539.00

Overheads & Contractors Profit 0.13615
@13.615% 21539.00 2932.53
Rate for 1 each 24471.53
Providing Independent earthing by excavating atrench to a depth f 2.10m in ordinary soils as specified
1.50 X 0.6 to a depth of 0.9m and 1.2 X 0.6 to a depth of 1.20m ,using 40 mm dia 'B' class GI Pipe of 2.5
m long with necessary accessories with 450mm x 50 mm thick hume pipe ring duly providing staggered
BLD-ELEC. 5- holes including filling with 40 kg of hard coke and 20 kg salt providing with equal proportion of in layers
13
1-1 etc. including cost and conveyance of all materials ,overheads & contractors profit etc., complete for
finished item of work

Unit : 1 Job

(BLD-CSTN- Earth work [1.5*0.6*0.9]=0.85 0.85 cum 267.54 1 cum 227.41

2-1)
(BLD-CSTN- Earth work [1.2*0.6*1.2]=0.9 0.90 cum 267.54 1 cum 240.79
2-1)
Add 25% extra for narrow trench & pit 0.25 468.20 117.05

a) Material
 Part I-Basic G I pipe 40 mm dia B class 2.5 Rm 248.00 1 Rm 620.00
rate Item 35
25mm x 6mm GI Flat (1.18Kgs/1Mtr) 0.2 Rm 91.00 1 Rm 18.20
ELEC-6.7.6 . I
ELEC-8.4.20 12mm dia holes [ 4+16=20] 20 Nos 8.00 1 Nos 160.00
ELEC-8.4.21 G.I Nuts, Bolts and Washers 4 set 14.00 1 set 56.00
450mm x 50 mm (18" dia 2" )thick 1 Nos 303.00 1 Nos 303.00
ELEC-8.4.22 hume pipe ring
ELEC-8.1.10 Hard coke 40 kg 24.00 1 kg 960.00
ELEC-8.1.11 Salt 20 kg 19.00 1 kg 380.00
b) labour charges for fixing pipe ring
and connections
semi skilled electrician 0.50 565.00 1 Day 282.50
helper 0.50 525.00 1 Day 262.50
MA @ 40% 0.40 545.00 218.00
3845.45
Overheads & Contractors Profit 0.13615 3845.45 523.56
@13.615%
Rate per Job 4369.01
Supply and transportation of 4.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to
withstand maximum wind velocity 180Km/ Hr glass reinforced polymer (GRP) composite type Conical
pole with single arm bracket of length 1Mtr and internal junction box including cost and conveyance of all
### ELEC-6.1.34
materials ,overheads & contractors profit etc., complete for finished item of work
Makes: Bajaj / Kemrock / Sumip/Helipole

Rate as per SoR 1.00 Nos 12712.00 1.00 Nos 12,712.00

Overheads & Contractors Profit 0.13615
@13.615% 12712.00 1730.74
Rate for 1each 14442.74
Supply of 155 X 210 X 92 MM Size thermo plastic cable junction boxes with IP66/67 weather proof, for
outdoor installation with konckouts for cable entry including terminals etc., complete (sizes in mm) Make :
Hensel/Sadhrish including cost and conveyance of all materials ,overheads & contractors profit etc.,
### ELEC-6.1.29
complete for finished item of work
Make : Hensel/Sadhrish

Rate as per SoR 1.00 Nos 1893.00 1.00 Nos 1,893.00

Overheads & Contractors Profit 0.13615
@13.615% 1893.00 257.73
Rate for 1each 2150.73
Supply of 3 core 4.0 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V
as per IS 694/1990. including cost and conveyance of all materials ,overheads & contractors profit etc.,
14 ELEC-1.5.4 complete for finished item of work
Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/Goldmedal/GM
Rate as per SoR 1.00 Rmt 79.00 1.00 Rmt 79.00
Overheads & Contractors Profit 0.13615
@13.615% 79.00 10.76
Rate for 1 Rmt 89.76
Supply and laying of 8 SWG Copper wire(0.1155Kgs/1Mtr) sizes Earth wire/Strip in horizontal /Vertical
run in Ground/surface/Recess including, riveting , soldering, saddles ,making connection etc as required
15 ELEC-6.7.6
including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished
item of work
Rate as per SoR 1.00 Rmt 86.00 1.00 Rmt 86.00
Overheads & Contractors Profit 0.13615
@13.615% 86.00 11.71

Rate for 1 Rmt 97.71

Supply and fixing of 1 No. 6-32A SP MCB 10KA C/D Curve ISI mark including cost and conveyance of
all materials ,overheads & contractors profit etc.,
16 ELEC-2.10.1 Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens- 5SX4/ Havells STADx /L&T-AU/Indo Asian-
Opti pro/ HPL (Techno)
 Rate as per SoR ELEC-2.10.1 1.00 Nos 240.00 1.00 Each 240.00
Overheads & Contractors Profit 0.13615
@13.615% 240.00 32.68
Rate for 1 each 272.68
Supply and making end termination with heavy Aluminium lugs up to 16 sqmm (pin/ ring type) as per IS
specification duly crimped with crimping tool, PVC tape etc., including cost and conveyance of all
17 ELEC-4.1.13 materials ,overheads & contractors profit etc., complete for finished item of work
Makes:Dowels/Jainson/Comet

Rate as per SOR 17-18 ELEC-4.1.13 1.00 Nos 12.00 1.00 Each 12.00
Overheads & Contractors Profit 0.13615
@13.615%
12.00 1.63

Rate for 1 Each 13.63

Fabrication, Transportation of 4 m Street light pole with hot-dip galvanized as per BSEN - 10025
grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement,
including the Outdoor durable pure polyester powder coating for 4.0 Mtrs height, Pole having 2
sections 1500 mm length 115 mm dia Bottom pipe and 2500 mm length 75 mm dia Top pipe, base
plate 250 x 250 x 12 mm,with decorative Single arm bracket as directed by the Engineer- in-
charge and 4 Nos of M16 x 450 long 'J' bolts along with template, including cost and
As per
18 conveyance of all materials ,overheads & contractors profit etc., complete for finished item
Quotation
of work

Rate per each 6,678.00

Fabrication, Transportation of 4 m Street light pole with hot-dip galvanized as per BSEN - 10025
grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement,
including the Outdoor durable pure polyester powder coating for 4.0 Mtrs height, Pole having 2
sections 1500 mm length 115 mm dia Bottom pipe and 2500 mm length 75 mm dia Top pipe, base
plate 250 x 250 x 12 mm, with decorative Double arm bracket as directed by the Engineer-
in-charge and 4 Nos of M16 x 450 long 'J' bolts along with template, including cost and
As per conveyance of all materials ,overheads & contractors profit etc., complete for finished item
19
Quotation of work

Rate per each 7,210.00

Supply and fabrication of street light poles made with medium quality MS Pipes of 88.90mm OD for 1670mm long,
60.3mm OD Pipes of 1670 mm long and 42.4 mm OD for 1670 mm long welded to each other for a total height of
5.0 m and providing 33.70 mm OD MS pipe of 1000 mm long for arm bracket for Luminaires fixing welded to main
pole at suitable angle, suitable pole cap, base plate 300 x 300 x 10 mm and 4 Nos of 16 m dia 700 long 'J' bolts
along with template including cost of welding rods, power charges, labour charges for cutting, placing, welding and
19 As per data erecting in position, cost & convenience of all materials including wastage to site, complete painting the total length
of pipe with Painting to new iron work with one coat of Red oxide primer and two coats with synthetic enamel
paint Grade-II VOC including cost of all materials ,labour charges etc for finished item of work.

Unit : 1 Job

MS Pipes

MS Pipe section OD 88.90 mm with 4.0 13.96 Kg

mm thick @ 8.36 kg/Rmt for (1.67 m x
8.36 =13.96 Kgs )
MS Pipe section OD 60.3 mm with 3.6 mm 8.40 Kg
thick @ 5.03 kg/Rmt for (1.67 m x 5.03 =
8.40 Kgs )
 MS Pipe section OD 42.4 mm with 3.2 mm 5.03 Kg
thick @ 3.01 kg/Rmt for (1.67 m x 3.01
=5.03 Kgs)
MS Pipe section OD 33.7 mm with 3.2 mm 2.41 Kg
thick @ 2.41 kg/Rmt for (1 m x 2.41 = 2.41
Kgs) 1.0 Mtr Length Single Arm Bracket

MS plate of 300 x 300 x 10 mm thick @ 2.12 Kg

78.50 Kg/Sqmt for poles base plate

BMT-F-04 Total kgs 31.92 Kg 76.00 1.00 Kg 2425.92

BMT-F-04 Add 2.5% wastage on 29.80 kgs 0.800 Kg 76.00 1.00 Kg 60.80

BMM-V.16 Fabrication charges 31.92 Kg 30.00 1.00 Kg 957.60

BMM-V.15 Erections charges 31.92 Kg 6.00 1.00 Kg 191.52

191.52 76.61
MA @ 40% 0.40
700 long 'J' bolts along (16 dia 1.56 kg/m x 4.37 Kg 102.00 1.00 Kg 445.74
MAT-00284 0.70 m =1.09 x 4 nos = 4.37 kgs

Painting to new iron work with one coat of

Red oxide primer and two coats with
synthetic enamel paint Grade-II VOC for
Pole

MS Pipe section OD 88.90 mm with 4.0 0.470 Sqm

mm thick @ 8.36 kg/Rmt for (1.67 m x
8.36 =13.96 Kgs )
MS Pipe section OD 60.3 mm with 3.6 mm 0.32 Sqm
thick @ 5.03 kg/Rmt for (1.67 m x 5.03 =
8.40 Kgs )
MS Pipe section OD 42.4 mm with 3.2 mm 0.22 Sqm
thick @ 3.01 kg/Rmt for (1.67 m x 3.01
=5.03 Kgs)
MS Pipe section OD 33.7 mm with 3.2 mm 0.11 Sqm
thick @ 2.41 kg/Rmt for (1 m x 2.41 = 2.41
(BLD-CSTN- Kgs) 1.0 Mtr Length Single Arm Bracket
12-7 & 12-12-
197)
Total painting area 1.12 Sqm 194.74 1.00 Sqm 218.11

4376.30

4376.30 595.83
Overheads & Contractors Profit 0.13615
@13.615%
Rate per Job 4972.13

BLD-ELEC Foundation and erection charges with special T&P, for 5 Mtrs. Long MS / GI Garden pole duly erecting on base
13.4.5 plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.0 Mtr size pedestal
with Vibrated Plain Cement Concrete M 20 Nominal mix with necessary steel (10kgs) reinforcement and curing for
7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and
20 cost and conveyance of materials etc including cost and conveyance of all materials ,overheads & contractors profit
etc., complete for finished item of work

Unit = 1 No.
A. MATERIALS :
(BLD-CSTN-
2-1) Pit excavation (0.45x0.45x1.0 mtr) 0.20 Cum 267.54 1.00 Cum 53.51
(BLD-CSTN-
3-13-C)
(BLD-CSTN- V.P.C.C M 20 pedestal 0.20 Cum 6425.10 1.00 Cum 1285.02
4.2)&
Amendment in
Steel (HYSD) 10.00 Kgs 84.42 1.00 Kgs 844.20
SoR 2011-12
page No. 392 B. LABOUR
2nd class mason 0.20 Nos. 565.00 1.00 Each 113.00
 helper 0.40 Nos. 525.00 1.00 Each 210.00
MA @ 40% 0.40 323.00 129.20
2634.93

Overheads & Contractors Profit

@13.615% 0.13615 2634.93 358.75
Rate for 1 Each 2993.67
Supply and fixing of 45 W LED Street light Luminaire for existing street light pole, Luminaire made of pressure
diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V
AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with
Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV,
In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency
>90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as required complete as per the direction of
Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges
overheads & contractors profit etc., complete for finished item of work.
21 a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) /GE- Venture / Crompton(Nexus / Hawk series) /
Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells (EnduraSeries)/Greenlites(HILux)/Capart
(Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

BLD-ELEC 7-9-5
Unit = 1 No.
A. MATERIALS :
ELEC-3.8.23 45 W LED Street light Luminaire
1.00 Nos 4324.00 1.00 Each 4324.00
B. LABOUR
LAB-00005 skilled electrician 0.20 Nos. 700.00 1 Each 140.00
LAB-00079 semi skilled electrician 0.20 Nos. 565.00 1 Each 113.00
LAB-00120, helper 0.20 Nos. 525.00 1 Each 105.00
LAB-00121 MA @ 40% 0.40 358.00 143.20
4825.20
Overheads & Contractors Profit 0.13615
@13.615% 4825.20 656.95
Rate for 1 Each 5482.15
Supply and fixing of 90 W LED Street light Luminaire for existing street light pole, Luminaire made of pressure
diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V
AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with
Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV,
In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency
>90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as required complete as per the direction of
Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges
overheads & contractors profit etc., complete for finished item of work
1 a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) /GE- Venture /
Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells
(EnduraSeries)/Greenlites(HILux)/Capart (Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium)
/Eveready /Surya (Pollux) / Fortune Art (Leaf)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

BLD-ELEC 7-9-5
Unit = 1 No.
A. MATERIALS :
ELEC-3.8.24 90 W LED Street light Luminaire 1.00 Nos 8464.00 1.00 Each 8464.00
B. LABOUR
LAB-00005 skilled electrician 0.20 Nos. 700.00 1 Each 140.00
LAB-00079 semi skilled electrician 0.20 Nos. 565.00 1 Each 113.00
LAB-00120, helper 0.20 Nos. 525.00 1 Each 105.00
LAB-00121 MA @ 40% 0.40 358.00 143.20
 8965.20
Overheads & Contractors Profit 0.13615
@13.615% 8965.20 1220.61
Rate for 1 Each 10185.81
Supply and fixing of 120 W LED Street light Luminaire for existing street light pole, Luminaire made of pressure
diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V
AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with
Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV,
In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency
>90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as required complete as per the direction of
Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges
overheads & contractors profit etc., complete for finished item of work
22 a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) /GE- Venture /
Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells
(EnduraSeries)/Greenlites(HILux)/Capart (Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium)
/Eveready /Surya (Pollux) / Fortune Art (Leaf)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

BLD-ELEC 7-9-5
Unit = 1 No.
A. MATERIALS :
ELEC-3.8.24 120 W LED Street light Luminaire 1.00 Nos 10948.00 1.00 Each 10948.00
B. LABOUR
LAB-00005 skilled electrician 0.20 Nos. 700.00 1 Each 140.00
LAB-00079 semi skilled electrician 0.20 Nos. 565.00 1 Each 113.00
LAB-00120, helper 0.20 Nos. 525.00 1 Each 105.00
LAB-00121 MA @ 40% 0.40 358.00 143.20
11449.20
Overheads & Contractors Profit 0.13615
@13.615% 11449.20 1558.81
Rate for 1 Each 13008.01
Supply and transportation of 100 W LED Flood light Luminaire made of pressure diecast aluminium housing with
powder coated, having protective toughened glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's System efficacy >100lm/W and junction temperature < 70°C, with Ingress protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), IK08, Driver surge protection 4KV, external Surge protection ≥
10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,
minimum CRI>70,etc., including as required complete as per the direction of Engineer-in-charge and including
cost of all materials to site, incidental giving connections and all labour charges overheads & contractors profit etc.,
2 complete for finished item of work a)
LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /Crompton/ Bajaj/Greenlites / Havells/Capart(Premium)
/Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood)/ FortuneArrt (Fin)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG.

BLD-ELEC 7-9-5
Unit = 1 No.
A. MATERIALS :
ELEC-3.8.27 100 W LED Flood light Luminaire 1.00 Nos 9522.00 1.00 Each 9522.00
B. LABOUR
LAB-00005 skilled electrician 0.20 Nos. 700.00 1 Each 140.00
LAB-00079 semi skilled electrician 0.20 Nos. 565.00 1 Each 113.00
LAB-00120, helper 0.20 Nos. 525.00 1 Each 105.00
LAB-00121 MA @ 40% 0.40 358.00 143.20
10023.20
Overheads & Contractors Profit 0.13615
@13.615% 10023.20 1364.66
Rate for 1 Each 11387.86
22 Supply and Wiring with 1 run of 3 core 1.50 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control
cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc in the existing pipes for main supply
as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental
giving connections and all labour charges overheads & contractors profit etc., complete for finished item of work

Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster /orbit / Paragon/ RR Kabel/ RPG

BLD-ELEC-3.1.2
Unit = 1 Rmt
Taking output = 100 Rmt
A. MATERIALS :
ELEC-4.1.5 b 3 core 1.50 Sqmm XLPE/PVC insulated
& PVC sheathed unarmoured control 100.00 Rmt 124.00 1 Rmt 12400.00
cables
B. LABOUR
LAB-00005 skilled electrician 0.34 Nos. 700.00 1 Each 238.00
LAB-00079 semi skilled electrician 1.00 Nos. 565.00 1 Each 565.00
LAB-00120, helper 0.34 Nos. 525.00 1 Each 178.50
LAB-00121 MA @ 40% 0.40 981.50 392.60
13774.10
Overheads & Contractors Profit 0.13615
@13.615% 13774.10 1875.34

Rate per 100 rmt. 15649.44

Rate per 1 rmt. 156.49

Supply of 4 core 6.0 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS
694/1990. including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished
23 ELEC-1.5.5 item of work Makes: V-Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art / /Sudhakar/Orbit/
Tamra/Anchor/Plaza/Vihan/Ollvin

Rate as per SoR 1.00 Rmt 340.00 1.00 Rmt 340.00

Overheads & Contractors Profit 0.13615
@13.615% 340.00 46.29

Rate for 1 Rmt 386.29

Supply and fixing of 1 No. 6-32A SP MCB 10KA C/D Curve ISI mark as required complete as per the direction of
Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges
overheads & contractors profit etc., complete for finished item of work.
24 Makes: V-Guard/Bonton /Finecab/ HPL / Million / FortuneArt /Sudhakar/Orbit/ Tamra/Anchor /Plaza/
Vihan/Spykaar/ Ollvin/Laser/Beljin/Rhino/ Standard/ Vimal

BLD-ELEC-4.4.1
Taking output = Each
A.MATERIALS :
ELEC-2.10.1 6-32A SP MCB 1.00 Nos 240.00 1 Each 240.00
B. LABOUR
LAB-00005 skilled electrician 0.06 Nos. 700.00 1 Each 42.00
LAB-00079 semi skilled electrician 0.06 Nos. 565.00 1 Each 33.90
LAB-00120, helper 0.125 Nos. 525.00 1 Each 65.63
LAB-00121 MA @ 40% 0.40 141.53 56.61
438.14
Overheads & Contractors Profit 0.13615
@13.615% 438.14 59.65
Rate for 1 each 497.79
 Supply of Automatic Street Light Control System with Optical Micro Sensor, Low volatage / High voltage trip and
reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs
and contactor suitable to control the load of 5 KW of Three phase load with necessary clamping arrangements.
1 ELEC-3.5.2 Make: Swadeep Nature Switch / Light Mate /GL/Bajaj

Rate as per SOR 1.00 Nos 16280.00 1.00 Each 16280.00

Overheads & Contractors Profit 0.13615
@13.615%
16280.00 2216.52

Rate for 1 Each 18496.52

Supply and transportation of 9 Watt KEW SPIKE made of The luminaires have a body made of
aluminium & toughened glass protector , Efficacy - 75 lm/W*, (CCT) - 3000K, CRI - 70, Control
Gear Tightness IP 65, IK 05, L70 @ 50,000 Hours, Dia 212mm x100mm x 399mm, 1.14Kg and
including as required complete as per the direction of Engineer-in-charge and including cost of all
materials to site, incidental giving connections and all labour charges overheads & contractors
profit etc., complete for finished item of work Make: Justled/ Keselec / Equivalent,
As per
25
Quotation

Rate per each 3,200.00

Supply and transportation of 3 Way TRIO LED Bollard made of Aluminium die cast with LED
SMD 2835 Chip of 50 LED x 0.25 W - 12W separate optical and control gear compartment with
IP66, IK 08, size 120mm x 120 mm and 900mm length, Overall luminous efficiency of 60lm/W,
CCT of 3500K, CRI >70, 50,000 hours at L70. Surge Protection Device Standard 6kV, Power
Factor: > 0.95, Current: 600ma, Body Color Dark Grey Texture FInish. and including as required
complete as per the direction of Engineer-in-charge and including cost of all materials to site,
incidental giving connections and all labour charges overheads & contractors profit etc., complete
As per for finished item of work Make: Justled/ Keselec / Equivalent
2
Quotation

Rate per each 5,668.00

Supply and transportation of 3 Way TRIO LED Bollard made of Aluminium die cast with LED
SMD 2835 Chip of 50 LED x 0.25 W - 12W separate optical and control gear compartment with
IP66, IK 08, size 120mm x 120 mm and 900mm length, Overall luminous efficiency of 60lm/W,
CCT of 3500K, CRI >70, 50,000 hours at L70. Surge Protection Device Standard 6kV, Power
Factor: > 0.95, Current: 600ma, Body Color Dark Grey Texture FInish. and including as required
complete as per the direction of Engineer-in-charge and including cost of all materials to site,
incidental giving connections and all labour charges overheads & contractors profit etc., complete
As per for finished item of work Make: Justled/ Keselec / Equivalent
26
Quotation

Rate per each 5,668.00

 Supply and transportation of 16 Watt ISA LED Bollard made of mild steel, cadmium plated and
painted body colour grey, an acrylic protector sealed & tightened to the body to achieve an optical
tightness of IP 66, Efficacy - 55 lm/W, (CCT) - 3000K, CRI - 70, Control Gear Tightness IP 44, IK
06, L70 @50,000 Hours, Dia140 mm,1000 mm length, 17.7 Kg including as required complete as
per the direction of Engineer-in-charge and including cost of all materials to site, incidental giving
connections and all labour charges overheads & contractors profit etc., complete for finished item
of work
As per Make: Justled/ Keselec / Equivalent,
27
Quotation

Rate per each 21,000.00

Supply and fabrication of street light poles made with medium quality MS Pipes of 76.1mm OD for 1120mm long,
60.3mm OD Pipes of 1380mm long and 48.3mm OD for 1500mm long welded to each other for a total height of
4.0 m and providing 48.3mm OD MS pipe of 450mm long for arm bracket for Luminaires fixing welded to main
pole at suitable angle ,including cost of welding rods, power charges, labour charges for cutting, placing, welding
and erecting in position and fixing, cost & convenience of all materials including wastage to site, complete painting
### the total length of pipe with Painting to new iron work with one coat of Red oxide primer and two coats with
synthetic enamel paint Grade-II VOC including cost of all materials ,labour charges etc for finished item of work.

Unit : 1 Job

MS Pipes

MS Pipe section OD 76.1mm with 3.6 mm 7.21 Kg

thick @ 6.44 kg/Rmt for (1.12 m x 6.44
=7.21 Kgs )
MS Pipe section OD 60.3 mm with 3.6 mm 6.94 Kg
thick @ 5.03 kg/Rmt for (1.38 m x 5.03
=6.94 Kgs )
MS Pipe section OD 48.3 mm with 3.2 mm 5.34 Kg
thick @ 3.56 kg/Rmt for (1.5 m x 3.56
=5.34 Kgs)
MS Pipe section OD 48.3 mm with 3.2 mm 1.60 Kg
thick @ 3.56 kg/Rmt for arm bracket (0.45
m x 3.56 =5.34 Kgs)

BMT-F-04 Total kgs 21.09 Kg 76.00 1.00 Kg 1602.84

BMT-F-04 Add 2.5% wastage on 20.66 kgs 0.520 Kg 76.00 1.00 Kg 39.52

BMM-V.16 Fabrication charges 21.09 Kg 30.00 1.00 Kg 632.70

BMM-V.15 Erections charges 21.09 Kg 6.00 1.00 Kg 126.54

MA @ 40% 0.40 126.54 50.62

Painting to new iron work with one coat of

Red oxide primer and two coats with
synthetic enamel paint Grade-II VOC for
Pole

MS Pipe section OD 76.1mm for (1.12 m x 0.270 Sqm

3.141 x 0.0761 =0.270 sqm )
MS Pipe section OD 60.3 mm for (1.38 m x 0.26 Sqm
3.141 x 0.0603 =0.260 sqm )
MS Pipe section OD 48.3 mm for (1.5 m x 0.23 Sqm
3.141 x 0.0483 =0.253 sqm )
MS Pipe section OD 48.3 mm for (0.45 m x 0.11 Sqm
3.141 x 0.0483 =0.11 sqm )
 (BLD-CSTN- Total painting area 0.87 Sqm 194.74 1.00 Sqm 169.42
12-7 & 12-12-
197)
2621.64

Overheads & Contractors Profit 0.13615 2621.64 356.94

@13.615%
Rate per Job 2978.58

Supply and fabrication of street light poles made with G I pipe 50 mm dia B class of 2.0 m long ,G I pipe 40 mm dia
B class of 2.0 m long welded to each other for a total height of 4.0 m and providing 25 mm dia B class of 1200 mm
long for arm bracket for Luminaires fixing welded to main pole at suitable angle , including cost of J- Bolts 30 cm
### long , bes plat welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and
fixing, cost & convenience of all materials including wastage to site etc complete for finished item of work.

Unit : 1 Job
G I pipe 50 mm dia B class 2.00 Rmt 48.00 1 Rmt 96.00
BMW-F.89
G I pipe 40 mm dia B class 2.00 Rmt 444.00 1 Rmt 888.00
BMW-F.87
G I pipe 25 mm dia B class for arm bracket 1.20 Rmt 286.00 1 Rmt 343.20
BMW-F.83

Part-I (46) J- Bolts 30 cm long 4.00 Nos 37.00 1 Nos 148.00

Total 1475.20
Overheads & Contractors Profit 0.13615 1475.20 200.85
@13.615%
Rate per Job 1676.05

Supply and Laying of U.G cables upto 50 Sq,mm including earth work excavation of trench 300x900mm
and ,laying the cable on sand cushion of 200 mm thick ,covering the cable with Bricks and refilling the
BLD-ELEC trench with the excavated soils[excl. rock] , including cost and conveyance of all materials ,overheads &
###
15-6-1 at 277 contractors profit etc., complete for finished item of work

Data for 100 Rm

A. MATERIALS :
Earth work 100*0.3*0.9 27 cum 267.54 1 cum 7223.58
Bricks 920 no. 8058.30 1000 no 7413.64
Sand for cushion 6.00 cum 1024.00 1 cum 6144.00
B. LABOUR
Mazdoor for sand filling, refilling 2.5 Nos. 525.00 1 Each 1312.50
skilled electrician 1 Nos. 700.00 1 Each 700.00
helper 2.00 Nos. 565.00 1 Each 1130.00
MA @ 40% 0.40 3142.50 1257.00
25180.72
Overheads & Contractors Profit 0.13615 25180.72 3428.36
@13.615%
Rate for 100 RM 28609.08
Rate for 1 RM 286.09
BLD-ELEC Supply and Transportation and erecting of 7.50HP, 5-10 Stage ,5star rated submersible motor pumpset, confirming
13.4.5 to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery
head and discharge with stainless steel shaft.Motor suitable for working on 415V ±
10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. with high quality wear resistance and
dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V ,
50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected
1 by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable
size and strength and including cost and conveyance of all materials ,overheads & contractors profit etc., complete
for finished item of work.
Makes : Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha/Falcon
 Unit = 1 No.
b) Labour charges for erection of
pump set including pipe connection
for suction & delivery

Skilled Fitter 2.00 Nos. 615.00 1.00 Each 1230.00

helper 3.00 Nos. 525.00 1.00 Each 1575.00
Plumber 1.00 Nos. 655.00 1.00 Each 655.00
MA @ 25% 0.25 3460.00 865.00
Hire charges of tripod with winch 50%
of Labour charges 0.50 Nos. 3460.00 1.00 Each 1730.00
6055.00

Overheads & Contractors Profit

@13.615% 0.13615 6055.00 824.39
Rate for 1 Each 6879.39
BLD-ELEC Supply and erecting, ISI mark submersible 7.5 HP, 3 Phase,12-16 stages pumpset suitable for 156 mm dia borewell
11.3.13 with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump
coupling and pivot of 3 phase 415V , 50Hz.. A.C. power supply copper winding with water proof insulation and high
1 precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with
necessary H-type clamp of suitable size and strength and including cost and conveyance of all materials ,overheads
& contractors profit etc., complete for finished item of work.

Unit = 1 No.
A.MATERIALS :

ELEC-5.4.5 E. 1.00 Nos 1 Each 46200.00

7.5 HP, 3 Phase,12-16 stages pumpset 46,200.00
B) Labour charges for erection of
pump set including pipe connection
for suction & delivery
LAB-00006 Skilled Fitter 2.00 Nos. 615.00 1.00 Each 1230.00
LAB-00079 Helper Fitter 3.00 Nos. 525.00 1.00 Each 1575.00
LAB-00036 Plumber 1.00 Nos. 655.00 1.00 Each 655.00
MA @ 25% 0.20 3460.00 692.00
Hire charges of tripod with winch 50%
of Labour charges 0.50 Nos. 3460.00 1.00 Each 1730.00
52082.00

Overheads & Contractors Profit

@13.615% 0.13615 52082.00 7090.96
Rate for 1 Each 59172.96
 CIVIL DATA : Page-3

A.P.URBAN GREENING AND BEAUTIFICATION CORPORATION

DATA SoR 2017-2018

Chain-link mesh fencing including digging and fixing

Sl. Item Weight Total Amount (In

Description Nos L B D Qty Unit Rate Unit
No. Index /Metre weight Rs.)
25 Supply and fixing of Vertical post 50x50x2.9mm thick M.S Square of 1.85m height each fixing at a distance of 2.0m
centre to centre, pit of 0.50x0.50x0.50m size in all soils , and PCC (1:4:8) for 0.50x0.50x0.10 m for pedestal of
0.50x0.50x0.40m size with VCC(1:3:6) using 20mm graded metal for fixing the M.S Square Post duly welded with 2 Nos
of MS squares bar 12 mm of length 150 mm as holdfasts for proper securing of M.S Square Post and embedding in the
VCC pedestal for 0.50m depth with clear exposed M.S Square Post of 1.50m above bed level and MS squares bar of 12
mm at top along the direction of mesh , fixing a G.I. Chainlink fabric fencing of required width in mesh size 50x50 mm
As per
data opening of 4 mm dia GI wire and fixing with welding/ fitted with suitable bolts and nuts/ 1numbers of 1.5 m long MS flat
25 x 5mm thick for fixing chain-link mesh to vertical post to the M.S Square Post and fixing a MS dummy cap on top of the
post for closing hollow vertical post, Painting to new iron work with one coat of Red oxide primer and two coats with
synthetic enamel paint Grade-II VOC, including cost of all materials to site with taxes and fixing labour charges etc., for
complete the work.

Data for 10 m x 1.5 m= 15 Sqm

A.MATERIALS :
(BLD- Earth work for pit size is 0.50 5 0.50 0.50 0.50 0.630 Cum 267.54 Cum 168.55
CSTN-2-1) x 0.50 x 0.50 m

(BLD- PCC (1:4:8) for 0.50x0.50x0.10 5 0.50 0.50 0.10 0.130 Cum 4704.34 Cum 611.56
CSTN-3-5) m

(BLD- VCC(1:3:6) for fixing MS 5 0.50 0.50 0.40 0.500 Cum 5665.56 Cum 2832.78
CSTN-3-10 Square 0.50x0.50x0.40 m
& 11)
As per MS Square hollow section 5 1.85 9.250 Rmt 4.12 38.11 60.00 kg 2286.60
Monthly 50mm X 50mm with 2.9mm
rates thick @ 4.12 kg/Rmt for vertical
post

As per MS squares bar 12 mm @ 1.13 1 10.00 10.000 Rmt 1.13 11.30 60.00 kg 678.00
Monthly 0kg/Rmt fix at top and along
rates the direction for fixing of
Chain-link fencing

As per MS squares bar 12 mm @ 1.13 10 0.15 1.500 Rmt 1.13 1.70 60.00 kg 102.00
Monthly 0kg/Rmt for holdfasts
rates
As per MS flat 25 x 5mm thick mm @ 5 1.50 7.500 Rmt 1.00 7.50 60.00 kg 450.00
Monthly 1.0kg/Rmt for fixing chain-link
rates mesh to vertical post

BMT F.20 Chainlink mesh [50x50mm 10 1.50 15.000 Sqm 886.01 Sqm 13290.11
opening] of 4mm dia

(BLD- Painting to new iron work with 5 1.50 0.20 1.500 Sqm 221.26 Sqm 331.88
CSTN-12-7 one coat of Red oxide primer
& 12-12- and two coats with synthetic
197) enamel paint Grade-II VOC for
M.S.Square hollow section
(BLD- Painting to new iron work with 1 10 0.060 0.600 Sqm 221.26 Sqm 132.75
CSTN-12-7 one coat of Red oxide primer
& 12-12- and two coats with synthetic
197) enamel paint Grade-II VOC for
M.S. flat

LABOUR :
BMM-V.16 Fabrication charges 58.61 Kg 30.00 Kg 1758.30

MA@ 40% on 75% of 0.40 1318.73 527.49

fabrication after deduction of
power charges and welding
rods and welding machine

BMM-V.15 Erections charges 58.61 Kg 6.00 Kg 351.66

MA @ 40% 0.40 351.66 140.66

Overheads & Contractors Profit 0.13615 23662.34 3221.63
@13.615%
Rate for fixing 10 Rmt x 1.5m =15sqm 26883.97
Rate for fixing 1sqm 1792.26
2688.40