8 7 6 5 4 3 2 1

DATUM A B C CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE CURRENT DESIGN ACTIVITY
REVISION HISTORY - ALL SHEETS ARE THE SAME REVISION
LOCATION H2-03A7-03G3-03 ZONE REV DESCRIPTION DATE APPROVED
- INITIAL RELEASE, SEE ECN-6170022 SEE ECN SEE ECN
A SEE ECN-6171529 SEE ECN SEE ECN
H NOTES: H
1. MANUFACTURE PER HPS1011.
1.1 MANUFACTURE PER THE ELECTRONIC SOURCE DATA CONTAINED IN EDF_60007813-2006_A.ZIP.

2. INTERPRET DRAWING PER ASME Y14.100-2017. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5-2018.
DIMENSIONS AND TOLERANCES APPLY AFTER PROCESSING. UNTOLERANCED DIMENSIONS ARE BASIC.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.

3. FINISHED CONDUCTIVE FEATURE SIZE:

3.1 MINIMUM FINISHED EXTERNAL CONDUCTOR WIDTH SHALL BE .003.
3.2 MINIMUM FINISHED EXTERNAL CONDUCTOR SPACING SHALL BE .0048.
3.3 MINIMUM FINISHED INTERNAL CONDUCTOR WIDTH SHALL BE .003.
3.4 MINIMUM FINISHED INTERNAL CONDUCTOR SPACING SHALL BE .003.

4 MATERIAL SHALL BE PER IPC-4101/126; COPPER FOIL SHALL BE PER IPC-4101 TYPE H OR IPC-4562/3 CU-E3.

G 4.1 OVERALL PRINTED BOARD THICKNESS IS INCLUSIVE OF EXTERNAL SURFACE CONDUCTORS BUT, EXCLUSIVE OF SOLDER MASK. G
4.2 THE STARTING COPPER WEIGHT OF EXTERNAL LAYERS SHALL BE .25 OZ. MINIMUM.

5. FINISH
5.1 FINAL FINISH SHALL BE ENIG PER IPC-4552.

5.2 AREAS DEFINED ON NICKEL PLATE LAYERS SHALL BE PLATED OVER BARE COPPER WITH 200 MICROINCHES MINIMUM OF NICKEL
PER SAE AMS-QQ-N-290. PERMISSIBLE TO HAVE PLATING TABS FOR NICKEL LAYERS.

6 SOLDER MASK AND VIA PROTECTION:

6.1 SOLDER MASK OVER FINAL FINISH OR BARE COPPER ON PRIMARY AND SECONDARY SIDES USING LIQUID PHOTOIMAGEABLE
SOLDER MASK, PER HPS1011 AND IPC-SM-840, CLASS H, GREEN AND SOLDER MASK ARTWORK. LANDS SHALL BE FREE OF SOLDER MASK.
6.2 NOTED VIAS SHALL INCORPORATE A VIA PROTECTION STRATEGY. THE VIA STRUCTURE SHALL BE TYPE VII (FILLED AND CAPPED) PER HPS1011.
6.2.1 MINIMUM COPPER WRAP THICKNESS SHALL BE .0002.

7. MARKING AND TRACEABILITY SHALL BE PER HPS1011.

F 8. ARTWORK FOR FABRICATION TO BE CREATED FROM THE ODB++ FILE OR THE SUPPLIED GERBER FILES LISTED IN THE PRINTED BOARD LAYER TABLE AT THE REVISION
LEVEL INDICATED ON SHEET 2.
F
8.1 THE SUPPLIER SHALL NOT MODIFY ARTWORK FEATURES OTHER THAN FOR COMPENSATION FOR ETCH FACTOR OR MATERIAL
PROCESSING CHARACTERISTICS.
8.2 THE SOLDER MASK TEMPLATE MAY BE MODIFIED TO WITHIN .002 OF THE SUPPLIED ARTWORK CONDUCTIVE PADS. A MINIMUM OF .0035
SOLDER MASK WEB IS TO BE MAINTAINED BETWEEN PADS.
8.3 THE SUPPLIER IS ALLOWED TO MODIFY CIRCUIT WIDTHS TO MEET IMPEDANCE REQUIREMENT PER NOTES 9 AND 10 IN ACCORDANCE WITH HPS1011.

9. TEST COUPONS REQUIRED:

9.1 QUALITY CONFORMANCE COUPONS SHALL BE PER HPS1011. COUPONS SHALL BE REMOVED BY THE MANUFACTURER PRIOR TO SHIPMENT.
USE OF THE COUPONS IN APPENDIX A OR B OF IPC-2221 SHALL BE AT THE DISCRETION OF THE SUPPLIER.
9.2 THE INTERCONNECT STRESS COUPON (IST) SHALL BE IN ACCORDANCE WITH HPS1011
9.3 CONTROLLED IMPEDANCE TEST COUPON SHALL BE IN ACCORDANCE WITH IPC-2141 TO MEET IMPEDANCE REQUIREMENTS ON COUPON AND
PRINTED BOARD. THIS COUPON SHALL BE A MINIMUM OF SIX INCHES LONG.

10 PRINTED BOARD AND COUPONS SHALL MEET THE FOLLOWING IMPEDANCE REQUIREMENTS:
10.1 TRACES ON LAYERS 1 AND 12 WITH .0075 NOMINAL WIDTH SHALL HAVE A CHARACTERISTIC IMPEDANCE OF 50 OHMS +/- 10%.
10.2 TRACES ON LAYERS 3 AND 10 WITH .007 NOMINAL WIDTH SHALL HAVE A CHARACTERISTIC IMPEDANCE OF 50 OHMS +/- 10%.
E 10.3 TRACES ON LAYERS 5 AND 8 WITH .0055 NOMINAL WIDTH SHALL HAVE A CHARACTERISTIC IMPEDANCE OF 50 OHMS +/- 10%. E
10.4 TRACE PAIRS ON LAYERS 3 AND 10 WITH .006 NOMINAL WIDTH AND .01 NOMINAL SPACING SHALL HAVE A DIFFERENTIAL IMPEDANCE OF 100 OHMS +/- 10%.
10.5 TRACE PAIRS ON LAYER 5 AND 8 WITH .005 NOMINAL WIDTH AND .01 NOMINAL SPACING SHALL HAVE A DIFFERENTIAL IMPEDANCE OF 100 OHMS +/- 10%.

11. FULL BARE PRINTED BOARD CONTINUITY AND ISOLATION TESTS SHALL BE PERFORMED USING ONE OF THE FOLLOWING FILE TYPES: ODB++ OR IPC-D-356.

12 APPLY LEGEND (SILKSCREEN LAYER) USING MCN94900028-001 OF CONTRASTING COLOR USING THE ELECTRONIC DATA PROVIDED.
LEGIBILITY OF LEGEND IS NOT A CRITERIA FOR REJECTION.

13. A MINIMUM INTERNAL ANNULAR RING OF .001 IS DESIRED. ANY MEASUREABLE AMOUNT SHALL BE ACCEPTABLE, BUT NO BREAK OUT IS PERMITTED.

D D

The export classifications (HEC/TEC) in this watermark supersede any other classification. Document is restricted per applicable export laws.
C C
PRODUCTION - Released - 16 Feb 2024 15:33:09 UTC

Downloaded By: MS, LALITHA - 10-06-2024_07-04-04 - TEC: 7E994

B B

US GOVERNMENT DATA RIGHTS SIMILAR PART NO

NONE NA $HONEYWELL_TITLE$
PROGRAM AEROSPACE - PHOENIX, AZ USA
HONEYWELL DATA RIGHTS ELECTRONIC APPROVALS
STANDARD HONEYWELL PROPRIETARY ANTHEM TITLE
MA WORK ORD/EWO/NETWORK ACTIVITY NO INITIAL RELEASE:ECN-6170022
A NA PRINTED BOARD, RIGID- A
HONEYWELL CONFIDENTIAL
THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE
SALES ORDER NUMBER
NA
ALL APPROVALS CONTROLLED BY THE
PRODUCT DATA MANAGEMENT SYSTEM BASEBOARD, SWITCH,
PROPERTY OF $HONEYWELL$, CONTAIN TRADE
SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED, THIRD ANGLE PROJECTION AIRCRAFT DATA NETWORK
DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT 60007813-1006 NA SIZE CAGE CODE DWG NO REV
PRIOR WRITTEN PERMISSION OF $HONEYWELL$.
ALL RIGHTS RESERVED. NEXT ASSY USED ON
CONTRACT NUMBER
E 55939 60007813-2006 A
INITIAL APPLICATION NA SCALE: 2/1 WT: NA SHEET 1 OF 4
20201117 EXPEDITION

REF: ECN-6171529
8 7 6 5 4 3 2 1 09-XX-XX_12:35
 8 7 6 5 4 3 2 1

H H

G PRINTED BOARD LAYER TABLE G

ARTWORK REV LAYER DESCRIPTION BASE NOTES

COPPER WT.

60007813-2006_A _SP.GDO A SILKSCREEN, PRIMARY NA 12

60007813-2006_A _MP.GDO A SOLDER MASK, PRIMARY NA 6.1

F 60007813-2006_A _NP.GDO A NICKEL PLATE, PRIMARY NA 5.2 F

60007813-2006_A _L1.GDO A LAYER 1, PADS, PRIMARY SIDE - 4.2, 5, 10.1

60007813-2006_A _L2.GDO A LAYER 2, PLANE 1.0 OZ

60007813-2006_A _L3.GDO A LAYER 3, SIGNAL 0.5 OZ 10.2, 10.4

60007813-2006_A _L4.GDO A LAYER 4, PLANE 0.5 OZ

E E
60007813-2006_A _L5.GDO A LAYER 5, SIGNAL 0.5 OZ 10.3, 10.5

60007813-2006_A _L6.GDO A LAYER 6, PLANE 1.0 OZ

60007813-2006_A _L7.GDO A LAYER 7, PLANE 1.0 OZ

60007813-2006_A _L8.GDO A LAYER 8, SIGNAL 0.5 OZ 10.3, 10.5

D 60007813-2006_A _L9.GDO A LAYER 9, PLANE 0.5 OZ D

60007813-2006_A _L10.GDO A LAYER 10, SIGNAL 0.5 OZ 10.2, 10.4

60007813-2006_A _L11.GDO A LAYER 11, PLANE 1.0 OZ

The export classifications (HEC/TEC) in this watermark supersede any other classification. Document is restricted per applicable export laws.
60007813-2006_A _L12.GDO A LAYER 12, PADS, SECONDARY SIDE - 4.2, 5, 10.1

60007813-2006_A _NS.GDO A NICKEL PLATE, SECONDARY NA 5.2

C C
60007813-2006_A _MS.GDO A SOLDER MASK, SECONDARY NA 6.1

60007813-2006_A _SS.GDO A SILKSCREEN, SECONDARY NA 12

Downloaded By: MS, LALITHA - 10-06-2024_07-04-04 - TEC: 7E994

B B

A A
HONEYWELL CONFIDENTIAL $HONEYWELL_TITLE$
THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE AEROSPACE - PHOENIX, AZ USA
PROPERTY OF $HONEYWELL$, CONTAIN TRADE
SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED, SIZE CAGE CODE DWG NO REV
DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT
PRIOR WRITTEN PERMISSION OF $HONEYWELL$. E 55939 60007813-2006 A
ALL RIGHTS RESERVED. SCALE: NONE SHEET 2 OF 4
20201117 EXPEDITION

REF: ECN-6171529
8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1

FIDUCIAL

2X 5.815
2X .075
H H

5.965
5.250
5.130
X 0
.225
d . 0 1 0 A Bm Cm

6.370
3X 6.220 2X 6.220
6.150
6.000
G G

F F

E E

3X 3.110

LAYER 1
PRIMARY SIDE LAYER 12
SECONDARY SIDE

D LOCAL FIDUCIAL
D

2.304

The export classifications (HEC/TEC) in this watermark supersede any other classification. Document is restricted per applicable export laws.
1.871
LOCAL FIDUCIAL
C 1.596
C

2X OPTICAL FIDUCIAL

Downloaded By: MS, LALITHA - 10-06-2024_07-04-04 - TEC: 7E994

j n.0 1 0 A B C
B B

.075 .229
2X .122
.035
Y 0 Y 0

.150 4.1

.082 +/- .008

1.120

5.430
5.550
X 0

4.954
3X 4.910
.560

3X 2.630

4.245
3.349

4.411

A A
HONEYWELL CONFIDENTIAL $HONEYWELL_TITLE$
THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE AEROSPACE - PHOENIX, AZ USA
PROPERTY OF $HONEYWELL$, CONTAIN TRADE
SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED,
B DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT
SIZE CAGE CODE DWG NO REV

VIEWED FROM PRIMARY SIDE PRIOR WRITTEN PERMISSION OF $HONEYWELL$.

ALL RIGHTS RESERVED.
E 55939 60007813-2006 A
SCALE:2/1 SHEET 3 OF 4
20201117 EXPEDITION

REF: ECN-6171529
8 7 6 5 4 3 2 1
 8 7 6 5 4 3 2 1

H H

M M M

D
L
G D

E E
E E
G E E G
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
F E E F
E E
E E
E E
E E
E E A
E E AAAAAAAAAAAAAAAAA
E E AAAAAAAAAAAAAAAAA
E E AAAAAAAAAAAAAAAAAA
AAAAAAAAAA AAA A A
E E A A A
E E A A A F F
E E F F A AA
E E AAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAA
E E AAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAA
F F

G
E E
B B
M B B M M

E E
E E
E E
E E
D E E D
E E AAAAAA AAAAA AAAAAA
AAAAAAAAA AAAAAA
E E AA A A A AAAAA
E E AA A A AA A AA A A
A AA AA A AA
E E AA AAAAAAAA AA AAA
E E A A A
AAA A AAAAA AAA
AAA A
E E AA A AAAAA AA F F
E E A AA A A A A AAA A
A A A AA A AA A AA THROUGH HOLES
E E A A AAAAA A A AA
H
E E AA A
AA A AA AAAAAA
A A A
A SYMBOL DIAMETER TOLERANCE PLATED QUANTITY POSITIONAL TOLERANCE UOS NOTES

The export classifications (HEC/TEC) in this watermark supersede any other classification. Document is restricted per applicable export laws.
E E AA
AA A AAA AA
A
E E AA A A AA A A A .008 +.000 / -.008 YES 348 6.2, 13
E E AAA A AA A AAA A A
AAA AA AAA AA AAA
E E .010 +.000 / -.010 YES 4240 6.2, 13
E E
E E
E E .012 +.000 / -.012 YES 786 6.2, 13
E E
E E B .024 +/- .003 YES 4
E E
E E C .039 +/- .003 YES 2
E E
C E E D .042 +/- .003 YES 2
C
E E
E E E .043 +/- .003 YES 156
E E
E E F .050 +/- .003 YES 12
E E
E E G .126 +/- .003 YES 4
E E
E E H .050 +/- .003 NO 2 j n.010m A Bm Cm
E E
E E J .057 +/- .003 NO 2 j n.010m A Bm Cm
E E
E E K .125 +/- .002 NO 1 j n.010m A

L .125 +/- .002 NO 1 j n.010m A Bm

M .150 +/- .003 NO 9 j n.010m A Bm Cm

Downloaded By: MS, LALITHA - 10-06-2024_07-04-04 - TEC: 7E994

C C H
B F F J J F F B
M K M M

A VIEWED FROM PRIMARY SIDE HONEYWELL CONFIDENTIAL

A
$HONEYWELL_TITLE$
THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE AEROSPACE - PHOENIX, AZ USA
PROPERTY OF $HONEYWELL$, CONTAIN TRADE
SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED, SIZE CAGE CODE DWG NO REV
DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT
PRIOR WRITTEN PERMISSION OF $HONEYWELL$. E 55939 60007813-2006 A
ALL RIGHTS RESERVED. SCALE:2/1 SHEET 4 OF 4
20201117 EXPEDITION

REF: ECN-6171529
8 7 6 5 4 3 2 1