Technology partner

CHARREX PFP-1000
Solvent Free Epoxy Intumescent Coating

PRODUCT High performance epoxy intumescent fire protection coating.

DESCRIPTION The product is a high build, two pack material providing excellent durability and
combined corrosion and fire protection. CHARREX PFP-1000 is qualified by
Underwriters Laboratories (UL) ANSI/UL 1709.

RECOMMENDED USE For use in the onshore oil, gas, petrochemical and power generation industries. For
the protection of steel structures, pipework and vessels from the effects of
hydrocarbon pool fires.

PRODUCT DATA Color : Grey(Base : Black, Hardener : White)

Flash Point : Part A 130℃ / Part B 100℃
VOC : None
Solids by Volume : 100 %
Mixing Ratio : Base / Hardener = 2.5 / 1 (by Weight)
Coverage(Theoretical) : 1.00 m2/Kg [1.00 Kg/m2] at D.F.T 1,000 ㎛
Typical Thickness : 1,000 ~ 7,000 ㎛ (per 1 coat)
Method of Application : Plural component spray, Airless spray(Small areas)
Trowel(Touch up)

DRYING TIME Drying Time (at D.F.T 5,000 um)

Temperature 5oC 10oC 20oC 30oC
* Surface Dry 9 hrs. 8 hrs. 6 hrs. 4 hrs.
* Hard Dry 30 hrs. 28 hrs. 25 hrs. 22 hrs.
* Interval(Min) 24 hrs. 21 hrs. 11 hrs. 5 hrs.
Interval(Max) - - - -

* Surface Dry : The State of drying when slight pressure with a finger does
not leave an important or reveal tackiness.

* Hard Dry : Minimum time before the coated objects can be available
without physical damage.
Please consult with CMP sales for more specific information.
* Interval (Min) : The shortest time allowed before the subsequent coats.

SURFACE PREPARATION 1) All surfaces to be coated should be clean, dry and free from contamination.
Prior to paint application, all surfaces should be assessed and treated in
accordance with ISO 8504:2000.
2) This product should only be applied to surfaces prepared by abrasive blast
cleaning to Sa2½ (ISO 8501-1:2007) or SSPC SP10.
3) Prime surfaces ensuring primer is kept within specified thickness, generally 50-
75 microns (2-3 mils) with maximum of 100 microns (4 mils) at overlap areas,
to avoid over thickness of primer.

APPLICATION Ambient Condition Temperature : Min 5 oC

Humidity : Max 85% R.H.
Page : 1/2
Date of issue: 17 October 2017
The information given in this guide is effective at the date shown above and subject to revision without notice.
 Technology partner

CHARREX PFP-1000
Solvent Free Epoxy Intumescent Coating

Thinner CHARREX THINNER

Plural component spray Nozzle Tip : 50o

Nozzle Size : 0.033 ~ 0.041”
Nozzle Pressure : 210 kg/㎠(3,000psi)

APPLICATION ADVICE Please check the typical temperature settings of paint (Part A : 45~50℃ / Part B :
40~45℃) for plural component spray application. It is recommended that the
paints(Part A & B) are moved to a ‘holding area’ controlled at 30-40℃ for a few days
to reduce the viscosity and so help with product pumping.

COMPATABILITY Primer BANNOH Series / Epoxy Primer

EPICON ZINC HB-2 / Epoxy Zinc Phosphate Primer
UNIVAN NT / Epoxy Primer

Sealer BANNOH Series / Epoxy Primer

Top Coat EPICON MARINE Series / Epoxy Finish

UNY MARINE Series / Urethane Finish

PACKAGE Pack size Part A : 17.85 kg X 2Tins

Part B : 14.30 kg X 1Tin
Unit Size 50 kg kit supplied as 2 Tins Part A and 1 Tin Part B.

SAFETY PRECAUTIONS In order to ensure safe use of our product, please be sure to follow the safety precautions
indicated on the SDS and the paint container. If you need further explanation, do not hesitate
to consult our personnel or our local distributors before buying, opening, using, or disposing
the product. Since product contains flammable materials, keep away from sparks and open
flame. No smoking should be permitted in the area on painting.

Wear an appropriate protector (eye and face protection, protective clothing, barrier creams,
etc.) when mixing, applying, or drying the paint. If products come into contact with the skin,
wash thoroughly with warm water and soap or suitable cleaner. If the eyes is contaminated,
irrigate with water and seek medical advice immediately.

DISCLAIMER
The information, including data, specifications, directions and recommendations, contained in this Data Sheet describes the experiment results under
controlled or specially defined conditions and we do not guarantee that the Products, when used under the actual conditions of any intended use, will
produce the same results. The performance of the Products in their actual use is affected by various factors, and the User must judge whether the Products
are suitable for specific uses. We do not guarantee the performance of the Products under any specific operation environment other than the performance
of the Products under the conditions described in this Data Sheet.

The content of this Data Sheet, which is intended for facilitation of the User’s understanding and convenience of use of the Products, is subject to change
at any time without prior notice. We use our best efforts to reflect the latest and most accurate information in this Data Sheet, but we will not bear any liability
whatsoever relating thereto. The User must confirm that the Data Sheet is the latest version prior to using the Products.

We do not guarantee the performance or safety of the Products when used for a purpose or use other than what is described herein. Nor will we be liable
for any explanation or guarantee provided by any distributor or sales agent with respect to the Products, other than what is described in this Data Sheet.

Furthermore, each of the Products described herein is composed of various chemical substances, some of which may contain toxic and/or harmful
ingredients and may cause harmful results as a result of misuse or overuse of the Products. For specific causes of risk, conditions of use, harmfulness, etc.
of each of the Products, please carefully read, prior to use of the Products, the MSDS (Material Safety Data Sheet) inserted in each of the Products. We will
not be liable for any accident that may be caused in violation thereof.

Page : 2/2
Date of issue: 17 October 2017
The information given in this guide is effective at the date shown above and subject to revision without notice.