Scribd
Upload
14 views

Quiz

The document discusses automatic transmission systems, explaining that they use a torque converter instead of a clutch and planetary gears to provide different gear ratios without a manual shift. It then provides an example of how reverse gear works in a manual transmission using a diagram and explains that the main purposes of the driveline and differential are to transfer power from the engine to the wheels while allowing different wheel speeds in turns.

Uploaded by

hayliyesus
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Quiz

The document discusses automatic transmission systems, explaining that they use a torque converter instead of a clutch and planetary gears to provide different gear ratios without a manual shift. It then provides an example of how reverse gear works in a manual transmission using a diagram and explains that the main purposes of the driveline and differential are to transfer power from the engine to the wheels while allowing different wheel speeds in turns.

Uploaded by

hayliyesus
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

QUIZ

1. EXPLAIN THE TYPES OF PROVIDED GEAR SHIFT IN AUTOMATIC


TRANSMISSION IN GENERAL.
Automatic Transmission system, unlike the Manual system requires no tedious gear change
phenomenon.
The Clutch on this type of transmission system is replaced by a Torque Converter, which is a
device that uses a liquid to transmit the power from the crankshaft to the gearbox. If prevents the
engine from stalling while the vehicle is at rest and transfers the engine torque to the gearbox.

The gearbox basically consists of Planetary gears, which are used to give different gear ratios. A
Planetary gear set consists of three types of gears viz, ring gear, sun gear and the planetary
pinions.
2. TAKE A SELECT ONE GEAR SHIFT (GEAR 1,2,3,4,5,6,AND REVERSE)
EXPLAIN HOW ITS WORK, USE SIMPLE DIAGRAM.
HOW ITS WORK (I SELECT TO REVERAE)
With the clutch pedal depressed, move the shift lever to the Reverse side of the Neutral
gate. Then push the shift lever down and shift to Reverse. The 6-speed manual transmission
has a lockout so you cannot accidentally shift from Fifth to Reverse instead of Sixth.
USE SIMPLE DIAGRAM

Common shift pattern for a 5-speed transmission


3. DESCRIBE THE MAIN PURPOSE OF DRIVE LINE

The driveline of your vehicle transfers power from the engine and transmission to the
wheels. It is the axels, driveshaft, wheels, joints and differentials. These components handle
the full force of your vehicle.

4. DESCRIBE THE MAIN FUNCTION OF DIFFERENTIAL

The differential is designed to drive a pair of wheels while allowing them to rotate at
different speeds. This function provides proportional RPMs between the left and right
wheels. If the inside tire rotates 15 RPM less in a turn than going straight, then, the outside
tire will rotate 15 RPM more than going straight.

You might also like