Scribd
Upload
75 views

PanelView Plus 7 - Ser A Ser B Startup Procedure

Uploaded by

nestor gallegos alegria
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
75 views

PanelView Plus 7 - Ser A Ser B Startup Procedure

Uploaded by

nestor gallegos alegria
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

SMP # R-#####-SMP Page 1 of 11

STANDARD MAINTENANCE PROCEDURES – Rockwell PVP7 Password Configuration & Change

ACTIVITY TYPE: MECHANICAL ELECTRICAL

SUB-ASSEMBLY: MCMXFCAN-HMI7x-RAx or standalone unit


MODEL: 2711P-TxxC22D9P Ser A & B (xx = Display Size; Ex. xx = 15 is 15”)
COMPONENT: PanelView Plus 7 HMI Series A & B
MANUFACTURER: Rockwell Automation

Intervention Picture Point


SMP # R-#####-SMP Page 2 of 11

Intervention Type: Rockwell PVP7 Password Configuration & Change


FREQUENCY (1S) EXECUTION TIME MINUTES MACHINE STATUS
As Needed 60 DYNAMIC STATIC

POINTS OF ATTENTION SPECIFIC TOOLS


Make sure you are wearing proper PPE before beginning this Flash drive for downloads of firmware files
maintenance activity. Refer to plant and department specific
PPE requirements. Optional: Keyboard and Mouse
Lockout all stored energy sources in the work area using
proper procedure. Review lockout placard and follow plant
lockout procedures.

If you are unclear how to preform this task, ask your


supervisor.

While performing this PM, if you discover any problems that


are outside the scope of the work covered by this PM,
generate a work ticket to initiate the necessary repairs AND
report to your supervisor.

Note: If this PM is not accurate please document any


changes or additions that should be made and give them to
your supervisor.

Follow all Stellantis Guidelines and


ensure all power and Ethernet/IP SPARE PARTS
connections are fully seated and COMPONENT
tightened. NPM DESCRIPTION
Rockwell
GuardLogix Safety
Automation
Processor
PanelView Plus 7
When setting or changing passwords, 1756-L71S
HMI – Ser A & B
change them to the Stellantis VPECR USB Keyboard and
“standards”. Reference General Mouse
Requirements in the HMI Specifications. USB Flashdrive(s)
for firmware

Check/verify that firmware in any


NEW/REPLACMENT PanelView Plus 7
HMI is at the proper BPR level.
SMP # R-#####-SMP Page 3 of 11

If a Ser A PVP7 Performance unit,


proceed to Page 4, Step #1

Check Product Label - Ser A

This SMP will provide the following for


the PVP7 Performance Ser A terminal:
Allowing Desktop Access, including
setting and resetting of the desktop Ser A
password
FYI

If a Ser B PVP7 Performance unit,


proceed to Page 7, Step #1

Note: Ser B units are identified with their


Product Label and additional Outer Box
Label(s) Check both Product and
Box Labels - Ser B

This SMP will provide the following for


the PVP7 Performance Ser B terminal:
Users “Out-of-Box” experience, including
Ser B
configuring and the setting of the desktop
password
FYI
Note: The Ser B of the PVP7 Performance terminal
operates on v12.xx firmware (minimum) but can
be programmed from FTView Studio ME Studio v10
or newer and will run v5.0 or newer .MER files
SMP # R-#####-SMP Page 4 of 11

Allowing Desktop Access, including


setting and resetting of the desktop
password

1.) To enable Desktop Access:

1.) To enable Desktop Access - cont:


Note: Password is no longer set

2.) To disable Desktop Access:

See Step# 3 to Define a new Password


and Challenge Question
SMP # R-#####-SMP Page 5 of 11

For ease of execution, the suggestion is for a terminal


connected keyboard and mouse

Password
Utilize the following Stellantis Password,
Challenge Question and Response (Ser A):

Set Password: 09En420_ Challenge Question


Set Challenge Question: What is the & Response
abbreviated name for Controls and Robotics?
Set Challenge Response: VPECR_

3.) Setting a Desktop Password:

1. Press Set Password – The Desktop Access Set Password


Dialog Box opens

2. Press Set Password – Enter Stellantis Password,


then press Enter

Important You must correctly enter this password


before accessing the Desktop

3.) Setting a Desktop Password – cont:


3. Press Set Challenge to enter Stellantis Challenge Question,
That you must correctly respond to when resetting the
Desktop Password

4. Press Set Response to enter Stellantis Response,


To the Challenge Question, then press Enter

5. Press OK - The Desktop Access Management Dialog shows


that a Password and Challenge Question are set

6. Press OK to return to terminal settings


SMP # R-#####-SMP Page 6 of 11

To clear and change the current password,


you must correctly respond to the
current challenge question. If you do not
remember the response, you must
restore the terminal to its factory defaults.
See The PVP7 User Manual for details.

4.) Resetting a Desktop Password


(existing unit):

4.) Resetting a Desktop Password (existing


unit) - cont:
See Step# 3 to Define a new Password
and Challenge Question

End of Activity – Ser A

Please refer to the latest PVP7 User Manual


and/or the Rockwell Automation
Knowledgebase site for further information
and details on the Ser A PVP7 Performance
HMIs.
SMP # R-#####-SMP Page 7 of 11

Start of Activity – Ser B

1.) Upon powerup, the PanelView Plus 7


Ser B will boot into the "Maintenance Menu”
window.

Exit this window by clicking “Exit


Maintenance Menu” at the top left

2.) From here, the panel will show Windows


performing it’s first Power Up with the
Rockwell Automation Logo

The terminal will load the “Welcome to


PanelView Plus” screen. Click Next at the
bottom right.

3.) Enter a device name unique for the


network, as well as the Administrator
Password:

Device Name: Follow Stellantis


Specifications (unless directed
otherwise)
Administrator Password: 09En420_

4.) Hit Next for both this screen and the “Let’s
Get Connected” screen.
An IP address is not required. A popup window
will show up with the title,” INITIAL SETUP
COMPLETE!”
Click ”Save and Reboot” on the popup window.
SMP # R-#####-SMP Page 8 of 11

5.) The next step is to go to the Rockwell


Product Compatibility and Downloads Center to
access the terminal FW (if you don’t already
have it on USB drive).
This can be accessed at the following link:
https://compatibility.rockwellautomation.com/Pa
ges/MultiProductSelector.aspx?crumb=111

6.) Under “Selections”, type in PanelView Plus


7 Performance, and Select Series B. This
selection will auto populate in the right
windowpane.
Click on the Download button next to the
firmware selected.

7.) A pop-up window will display as shown.


Select the one with For USB Firmware
Updates and click the Downloads button at the
top right.

8.) The next screen will show the firmware


selected for download.
Confirm the firmware being downloaded and
select Download now at the bottom right.
SMP # R-#####-SMP Page 9 of 11

9.) Accept the EULA, and an executable


(.exe) will download with random characters

10.) Run the executable that downloaded.


This usually pops up in the bottom left of the
Chrome Browser

11.) The download will automatically begin


in the popup program. Once complete, the
C:\RA folder will automatically open.
Unzip/Extract the contents of “2711P-
PVP7_Performance_12.101.zip” to the
root of the USB drive. The 13 (.cab)
files for flashing the firmware will be
organized as shown below.

12.) Remove the USB drive from the computer


and plug it into PanelView Plus 7.
After the 2nd bootup, the PanelView Plus 7 will
load into the PanelView Plus Firmware
Upgrade Utility.
Press Update from USB Storage.
SMP # R-#####-SMP Page10 of 11

13.) Click OK on the prompt


Once the files are copied over, a new popup will
suggest safe removal of the USB drive. The
drive can now be removed. Hit OK to continue
with flashing the firmware.

14.) The PanelView Plus will take time to install


the firmware, with a black load screen with a
gear. Once the firmware install is complete, the
device will boot into FactoryTalk View ME and
now behave just like a Ser A PVP7
Performance.

15.) Set the PanelView Plus 7 Password and


Challenge Response to the Stellantis standard:

Password: 09En420_
Challenge Question: What is the Abbreviate
name for controls and robotics?
Challenge response: VPECR_

Note: At this point, you should handle the Series


B PVP7 Performance similar to a Series A PVP7.

Note: The Ser B of the terminal operates on


v12.xx firmware (minimum) but can be
programmed from v10 or newer FTView Studio
ME Studio and will run v5.0 or newer .MER files
(v8+ .MER files are officially tested/supported
similar to a Ser A unit)
SMP # R-#####-SMP Page11 of 11

STANDARD MAINTENANCE PROCEDURES – Rockwell PVP7 Password Configuration & Change

Number Work Time (Min)


Electric Skilled Trade 1 20
Mechanic Skilled Trade
Tool / Die

Total 1 20

CREATE/MODIFICATIONS VERSION PLANT DATE

You might also like