DVD VIDEO PLAYER

T517C/T517CT

DVD VIDEO PLAYER

T517AH/T517AHT
SERVICE MANUAL T517C/T517CT/
SERVICE MANUAL MODELS : T517C/T517CT
SERVICE MANUAL T517C/T517CT/
T517AH/T517AHT
DVD VIDEO PLAYER

NAD ELECTRONICS INTERNATIONAL

TORONTO
© NAD 2008
 CONTENTS

SECTION 1.........SUMMARY
SECTION 2.........CABINET & MAIN CHASSIS
SECTION 3.........ELECTRICAL
SECTION 4.........MECHANISM (DP-12V)
SECTION 5.........REPLACEMENT PARTS LIST
 SECTION 1
SUMMARY

CONTENTS

PRODUCT SAFETY SERVICING GUIDELINES FOR DVD PRODUCTS..................................1-3

SERVICING PRECAUTIONS ....................................................................................................................1-4

• GENERAL SERVICING PRECAUTIONS
• INSULATION CHECKING PRODEDURE
• ELECTROSTATICALLY SENSITIVE (ES) DEVICES

THE PROCESS OF DISC DOWNLOAD ...............................................................................................1-5

SPECIFICATIONS ........................................................................................................................................1-7

1-2
PRODUCT SAFETY SERVICING GUIDELINES FOR DVD PRODUCTS
IMPORTANT SAFETY NOTICE
This manual was prepared for use only by properly trained audio-video service
technicians.
When servicing this product, under no circumstances should the original design be
modified or altered without permission from NAD. All components should be replaced
only with types identical to those in the original circuit and their physical location, wiring
and lead dress must conform to original layout upon completion of repairs.
Special components are also used to prevent x-radiation, shock and fire hazard.
These components are indicated by the letter “x” included in their component
designators and are required to maintain safe performance. No deviations are allowed
without prior approval by NAD.
Circuit diagrams may occasionally differ from the actual circuit used. This way,
implementation of the latest safety and performance improvement changes into the set
are not delayed until the new service literature is printed.
CAUTION: Do not attempt to modify this product in any way. Never perform
TIPS ON PROPER INSTALLATION
customized installations without manufacturer’s approval. Unauthorized modifications
1. Never install any receiver in a closed-in recess, cubbyhole, or closely fitting shelf
will not only void the warranty, but may lead to property damage or user injury.
space over, or close to, a heat duct, or in the path of heated air flow.
Service work should be performed only after you are thoroughly familiar with these
2. Avoid conditions of high humidity such as: outdoor patio installations where dew is a
safety checks and servicing guidelines.
factor, near steam radiators where steam leakage is a factor, etc.
GRAPHIC SYMBOLS 3. Avoid placement where draperies may obstruct venting. The customer should also
The exclamation point within an equilateral triangle is intended to alert avoid the use of decorative scarves or other coverings that might obstruct ventilation.
the service personnel to important safety information in the service
literature. 4. Wall- and shelf-mounted installations using a commercial mounting kit must follow
The lightning flash with arrowhead symbol within an equilateral triangle the factory-approved mounting instructions. A product mounted to a shelf or platform
is intended to alert the service personnel to the presence of noninsulated must retain its original feet (or the equivalent thickness in spacers) to provide
“dangerous voltage” that may be of sufficient magnitude to constitute a adequate air flow across the bottom. Bolts or screws used for fasteners must not
risk of electric shock. touch any parts or wiring. Perform leakage tests on customized installations.
The pictorial representation of a fuse and its rating within an equilateral 5. Caution customers against mounting a product on a sloping shelf or in a tilted
triangle is intended to convey to the service personnel the following fuse position, unless the receiver is properly secured.
replacement caution notice: 6. A product on a roll-about cart should be stable in its mounting to the cart.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF Caution the customer on the hazards of trying to roll a cart with small casters across
FIRE, REPLACE ALL FUSES WITH THE SAME TYPE AND RATING thresholds or deep pile carpets.
AS MARKED NEAR EACH FUSE.
7. Caution customers against using extension cords. Explain that a forest of
SERVICE INFORMATION extensions, sprouting from a single outlet, can lead to disastrous consequences to
While servicing, use an isolation transformer for protection from AC line shock. After the home and family.
original service problem has been corrected, make a check of the following:
FIRE AND SHOCK HAZARD
1. Be sure that all components are positioned to avoid a possibility of adjacent
component shorts. This is especially important on items trans-ported to and from the
repair shop.
2. Verify that all protective devices such as insulators, barriers, covers, shields, strain
reliefs, power supply cords, and other hardware have been reinstalled per the
original design. Be sure that the safety purpose of the polarized line plug has not
been defeated.
3. Soldering must be inspected to discover possible cold solder joints, solder splashes,
or sharp solder points. Be certain to remove all loose foreign particles.
4. Check for physical evidence of damage or deterioration to parts and components,
for frayed leads or damaged insulation (including the AC cord), and replace if
necessary.
5. No lead or component should touch a high current device or a resistor rated at 1 watt
or more. Lead tension around protruding metal surfaces must be avoided.
6. After reassembly of the set, always perform an AC leakage test on all exposed
metallic parts of the cabinet (the channel selector knobs, antenna terminals, handle
and screws) to be sure that set is safe to operate without danger of electrical shock.
DO NOT USE ALINE ISOLATION TRANSFORMER DURING THIS TEST. Use an
AC voltmeter having 5000 ohms per volt or more sensitivity in the following manner:
Connect a 1500 ohm, 10 watt resistor, paralleled by a .15 mfd 150V AC type
capacitor between a known good earth ground water pipe, conduit, etc.) and the
exposed metallic parts, one at a time. Measure the AC voltage across the
combination of 1500 ohm resistor and .15 mfd capacitor. Reverse the AC plug by
using a non-polarized adaptor and repeat AC voltage measurements for each
exposed metallic part. Voltage measured must not exceed 0.75 volts RMS. This
corresponds to 0.5 milliamp AC. Any value exceeding this limit constitutes a potential
shock hazard and must be corrected immediately.

1-3
 SERVICING PRECAUTIONS
CAUTION: Before servicing the DVD covered by this service Electrostatically Sensitive (ES) Devices
data and its supplements and addends, read and follow the Some semiconductor (solid state) devices can be damaged
SAFETY PRECAUTIONS. NOTE: if unforeseen circumstances easily by static electricity. Such components commonly are
create conflict between the following servicing precautions called Electrostatically Sensitive (ES) Devices. Examples of
and any of the safety precautions in this publication, always typical ES devices are integrated circuits and some field effect
follow the safety precautions. transistors and semiconductor chip components.
Remember Safety First : The following techniques should be used to help reduce the
incidence of component damage caused by static electricity.
General Servicing Precautions
1. Always unplug the DVD AC power cord from the AC power 1. Immediately before handling any semiconductor component
source before: or semiconductor-equipped assembly, drain off any
(1) Removing or reinstalling any component, circuit board, electrostatic charge on your body by touching a known earth
module, or any other assembly. ground. Alternatively, obtain and wear a commercially
(2) Disconnecting or reconnecting any internal electrical available discharging wrist strap device, which should be
plug or other electrical connection. removed for potential shock reasons prior to applying power
(3) Connecting a test substitute in parallel with an to the unit under test.
electrolytic capacitor.
Caution: A wrong part substitution or incorrect polarity 2. After removing an electrical assembly equipped with ES
installation of electrolytic capacitors may result in an devices, place the assembly on a conductive surface such
explosion hazard. as aluminum foil, to prevent electrostatic charge buildup or
exposure of the assembly.
2. Do not spray chemicals on or near this DVD or any of its
assemblies. 3. Use only a grounded-tip soldering iron to solder or unsolder
ES devices.
3. Unless specified otherwise in this service data, clean
electrical contacts by applying an appropriate contact 4. Use only an anti-static solder removal device. Some solder
cleaning solution to the contacts with a pipe cleaner, cotton- removal devices not classified as “anti-static” can generate
tipped swab, or comparable soft applicator. electrical charges sufficient to damage ES devices.
Unless specified otherwise in this service data, lubrication of
contacts is not required. 5. Do not use freon-propelled chemicals. These can generate
an electrical charge sufficient to damage ES devices.
4. Do not defeat any plug/socket B+ voltage interlocks with
which instruments covered by this service manual might be 6. Do not remove a replacement ES device from its protective
equipped. package until immediately before you are ready to install it.
(Most replacement ES devices are packaged with leads
5. Do not apply AC power to this DVD and / or any of its electrically shorted together by conductive foam, aluminum
electrical assemblies unless all solid state device heat sinks foil, or comparable conductive material).
are correctly installed.
7. Immediately before removing the protective material from
6. Always connect the test instrument ground lead to an the leads of a replacement ES device, touch the protective
appropriate ground before connecting the test instrument material to the chassis or circuit assembly into which the
positive lead. Always remove the test instrument ground device will be installed.
lead last.
Caution: Be sure no power is applied to the chassis or
Insulation Checking Procedure circuit, and observe all other safety precautions.
Disconnect the attachment plug from the AC outlet and turn
the power on. Connect an insulation resistance meter (500V) 8. Minimize bodily motions when handling unpackaged
to the blades of the attachment plug. The insulation resistance replacement ES devices. (Normally harmless motion such
between each blade of the attachment plug and accessible as the brushing together of your clothes fabric or the lifting
conductive parts (Note 1) should be more than 1Mohm. of your foot from a carpeted floor can generate static
Note 1: Accessible Conductive Parts include Metal panels, electricity sufficient to damage an ES device.)
Input terminals, Earphone jacks,etc.

1-4
 THE PROCESS OF DISC DOWNLOAD
Please follow the below process to download a program with disc

1. Turn on the DVD-player.

(Note. Be sure that there is no disc in DVD-player)

2. Press “SETUP” button on Remote control.

3. Choose a “display” menu by using the cursor button and then choose a “TV Aspect” menu. And choose “16:9”
menu.

4. Press the 1 --> 3 --> 9 --> 7 --> 1 --> 3 --> 9(numerical button) --> Enter key on remote control to confirm the
system information.

5. Remember or write the model name.

6. Change the program file name of new version to the model name
Ex> New ver. program file->LG_DV_LV80F7FC10EMSMIS_V014.ROM
Model name -> LG_DV_LV81F7FC00EMS
Change New ver. program file like this --> LG_DV_LV81F7FC00EMSMIS.ROM
(NOTICE) You must add “MIS” at the end of model name
If you don”t change the file name like that, Disc download isn”t be worked.

1-5
7. Copy the changed file to a disc.

8. Insert the copied disc to DVD-player.

9. If the below picture appears on the screen, Press “ ” key.

10.After the below picture appears on the screen, Disc will emerge from DVD-player automatically.
Take the disc out of the DVD-player.

11. After Disc download is completed, DVD-player turns off and then turns on automatically.

12.Do it again the process 1, 2, 3, 4 to confirm the version.

1-6
 SPECIFICATIONS
• GENERAL
Power requirements: AC 100 V ~ 240 V, 50 Hz / 60 Hz
Power consumption: 9W
Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot
Net weight (Approx.): 1.5 kg (3.3 lbs)
Operating temperature: 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity: 5 % to 90 %

• OUTPUTS
VIDEO OUTPUT: 1.0 V (p-p), 75 , sync negative, RCA jack x 1 / Scart (to TV)
S-VIDEO OUTPUT: (Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 
COMPONENT VIDEO OUTPUT: (Y) 1.0 V (p-p), 75 , negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2
HDMI OUTPUT (Video/Audio): 19 pin (HDMI standard, Type A)
AUDIO OUTPUT: 2.0 Vrms (1 kHz, 0 dB), 600 , RCA jack (L, R) x 1 / Scart (to TV)
DIGITAL AUDIO OUTPUT: COAXIAL: 0.5 V (p-p), 75 , RCA jack x 1
OPTICAL: 3 V (p-p), Optical jack x 1

• SYSTEM
Laser: Semiconductor laser, wavelength 650 nm
Signal system: PAL
Frequency response: DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio: More than 90 dB (ANALOG OUT connectors only)
Harmonic distortion: Less than 0.02 %
Dynamic range: More than 95 dB (DVD/CD)

1-7
MEMO

1-8
 SECTION 2
CABINET & MAIN CHASSIS

CONTENTS

EXPLODED VIEWS .....................................................................................................................................2-2

1. CABINET AND MAIN FRAME SECTION ..................................................................................................2-2
2. DECK MECHANISM SECTION (DP-12V).................................................................................................2-3
3. PACKING ACCESSORY SECTION...........................................................................................................2-4

2-1
 462 463
463 460
460
A26

462

A43

283
B
C
452 SCART
CABLE2 250
461
D P3702
275
KEY CABLE1 E
CN903 452
463 CN801
462
B
A46 460
452 C
462 463
USB E MAIN
A
280 TIMER A41 D
276
SMPS

P101
A50 A47

2-2
A44
1. CABINET AND MAIN FRAME SECTION

100V~240V
POWER CORD

320 300
467
465
EXPLODED VIEWS

470
261B

261
261A

462
260
261
462

262
261B

261A
OPTIONAL PART

261
462

261
2. DECK MECHANISM SECTION (DP-12V)

A26

001
A01
A02 002
439 003
018

013

014
020

017

435
015B 016
015
015A

010
440

026 442

012

442

012
442
037
012
A03

019

2-3
3. PACKING ACCESSORY SECTION

OPTIONAL PARTS

811 Plug Ass'y 1way(Yellow)

810 Cable Set Ass'y

808 Battery 812 Plug Ass'y 2way

900 Remocon 801 Owner's Manual

804 Packing Sheet

803 Packing

803 Packing

802 Box Carton

2-4
 SECTION 3
ELECTRICAL
CONTENTS
ELECTRICAL TROUBLESHOOTING GUIDE .....................................................................................3-2
1. SMPS TROUBLESHOOTING FLOW ......................................................................................................3-2
2. POWER CHECK FLOW ..........................................................................................................................3-4
3. SYSTEM OPERATION FLOW.................................................................................................................3-5
4. SYSTEM TEST FLOW ...........................................................................................................................3-6

DETAILS AND WAVEFORMS ON SYSTEM TEST AND DEBUGGIBG...................................3-12

1. SYSTEM 27MHZ CLOCK, RESET, FLASH R/W SIGNAL ....................................................................3-12
2. SDRAM CLOCK ...................................................................................................................................3-14
3. TRAY OPEN/CLOSE SIGNAL ...............................................................................................................3-14
4. SLED CONTROL RELATED SIGNAL (NO DISC CONDITION)............................................................3-15
5. LENS CONTROL RELATED SIGNAL (NO DISC CONDITION) ..........................................................3-15
6. LASER POWER CONTROL RELATED SIGNAL (NO DISC CONDITION) ..........................................3-16
7. DISC TYPE JUDGEMENT WAVEFORM...............................................................................................3-16
8. FOCUS ON WAVEFORM ......................................................................................................................3-18
9. SPINDLE CONTROL WAVEFORM (NO DISC CONDITION) ...............................................................3-19
10. TRACKING CONTROL RELATED SIGNAL (SYSTEM CHECKING) ....................................................3-20
11. MT1389S AUDIO OPTICAL AND COAXIAL OUTPUT (SPDIF) ............................................................3-21
12. MT1389S VIDEO OUTPUT WAVEFORM .............................................................................................3-21
13. AUDIO OUTPUT FROM MT1389S........................................................................................................3-22

CONNECTOR PICTURE ..........................................................................................................................3-23

1. ALL CONNECTOR PICTURE................................................................................................................3-23
2. MAIN BOARD CONNECTOR PICTURE ...............................................................................................3-24
3. CN201 CONNECTOR PICTURE...........................................................................................................3-25
4. CN202 CONNECTOR PICTURE...........................................................................................................3-25
5. CN601 CONNECTOR PICTURE...........................................................................................................3-26
6. CN602 CONNECTOR PICTURE...........................................................................................................3-26
7. CN604 CONNECTOR PICTURE...........................................................................................................3-27
8. CN605 CONNECTOR PICTURE...........................................................................................................3-27
9. CN705 CONNECTOR PICTURE...........................................................................................................3-28

BLOCK DIAGRAMS ..................................................................................................................................3-29

1. OVERALL BLOCK DIAGRAM ...............................................................................................................3-29
2. POWER (SMPS) BLOCK DIAGRAM.....................................................................................................3-30
3. MPEG & MEMORY BLOCK DIAGRAM.................................................................................................3-31
4. SERVO BLOCK DIAGRAM ...................................................................................................................3-32
5. VIDEO & HDMI BLOCK DIAGRAM.......................................................................................................3-33
6. AUDIO BLOCK DIAGRAM.....................................................................................................................3-34

CIRCUIT DIAGRAMS ................................................................................................................................3-35

1. POWER (SMPS) CIRCUIT DIAGRAM ..................................................................................................3-35
2. MPEG CIRCUIT DIAGRAM ...................................................................................................................3-37
3. SERVO CIRCUIT DIAGRAM .................................................................................................................3-39
4. JACK CIRCUIT DIAGRAM ....................................................................................................................3-41
5. SCART CIRCUIT DIAGRAM (OPTION) ................................................................................................3-43
6. USB CIRCUIT DIAGRAM ......................................................................................................................3-45
7. KEY CIRCUIT DIAGRAM ......................................................................................................................3-46
8. TIMER CIRCUIT DIAGRAM ..................................................................................................................3-47
• CIRCUIT VOLTAGE CHART .........................................................................................................3-49
PRINTED CIRCUIT BOARD DIAGRAMS...........................................................................................3-53
1. MAIN P.C.BOARD..................................................................................................................................3-53
2. POWER (SMPS) P.C.BOARD ...............................................................................................................3-55
3. KEY P.C.BOARD ...................................................................................................................................3-55
4. TIMER P.C.BOARD ...............................................................................................................................3-55
5. SCART P.C.BOARD (OPTION) .............................................................................................................3-57
6. USB P.C.BOARD ...................................................................................................................................3-57

3-1
 ELECTRICAL TROUBLESHOOTING GUIDE
1. SMPS TROUBLESHOOTING FLOW

No 3.3VA

YES

NO Replace the FR101

Is the FR101 normal? (Use the same ICW)

YES

Is the D105/D106/D107/ NO Replace the

D108 normal? D105/D106/D107/D108

YES

Is the Vcc (about 17V) NO

Check or Replace the IC101
supplied to IC101 Pin2?

YES

NO
Is the D121 normal? Replace the D121

YES

NO
Is there about 2.5V at the Replace the IC103
IC103 Pin1?

YES

NO
Is the D123 normal? Replace the D123

YES

NO
Is the D125 normal? Replace the D125

YES

Power Line of Main

PCB(DVD) is short

3-2
 ELECTRICAL TROUBLESHOOTING GUIDE

No REG 5.0V

YES

Is the Vcc(=5.6V)
•
• NO
supplied to Q126 Check or Replace the D123
Collector?
YES

Is the Vcc(=12V)
•
• NO Check the ‘PWR CTL “H”’
supplied to Q126 signal from μ-com
Base?
YES

Check or Replace the Q126

No 12V

YES

Is the Vcc(=14V)
•
• NO
supplied to Q123 Check or Replace the D125
Collector?
YES

Is the Vcc(=12V)
•
• NO Check the ‘PWR CTL “H”’
supplied to Q126 signal from μ-com
Base?
YES

Check or Replace the Q123

3-3
 ELECTRICAL TROUBLESHOOTING GUIDE
2. POWER CHECK FLOW
A. B.
No 5V No 3.3VA.

Is 3.3VA NO NO Is 3.3VA
section working? section working?

YES YES

Is 5.6V present at NO
Is 3.3V
No 3.3VA present at emitter
collector of Q126? of Q121?
YES
YES

Replace Q126. Check FR101 Replace Q121.

YES

Is there a DC voltage at NO Check D105/D106/D107/

cathode of D105 or D107? D108 and replace.
YES

Replace IC101.

3-4
 ELECTRICAL TROUBLESHOOTING GUIDE
3. SYSTEM OPERATION FLOW

Power on

1. 8032 initializes SERVO,DSP & RISC registers

2. Write RISC code to SDRAM
3. Reset RISC

Show LOGO

YES
Tray closed?

NO

Tray close to closed position

YES
SLED at inner side?

NO

SLED moves to inner position

1. Judge whether have disc and disc type

2. Jump to related disc reading procedure

YES
Recieve OPEN/CLOSE Key?

NO

1. Execute pressed Key & IR key

2. System operation routine loop

1. Stop playback & open Tray

2. Display tray open message & LOGO
NO

YES
Receive CLOSE Key?

3-5
 ELECTRICAL TROUBLESHOOTING GUIDE
4. SYSTEM TEST FLOW

TEST

Check the AC NO
Voltage Power PCBA (110V Replace power PCBA or AC transformer.
or 220V)
YES

Switch on the power PCBA

Is the DC
voltage outputs OK? NO
Repair or Replace power PCBA
(5V, 3.3V, 12V, 5.6V
MOTOR)
YES

Make sure the main PCBA don't

short on VCCs and switch it on.

YES

Is 3.3V NO
and 1.8V DC outputs normal Check the regulators or related diodes.
on main PCBA?

YES

Connect to PC RS232 cable and

update the FLASH memory code.

1. Check 27MHz system clock.

2. Check system reset circuit.
NO 3. Check FLASH R/W enable signal PRD,
Update FLASH
successfully? RWR.
4. Check RS232 SIGNALS.
5. Check FLASH Memory related circuit.
YES

3-6
 ELECTRICAL TROUBLESHOOTING GUIDE

RESET or power on.

Check connection lines

NO Flash NO between FLASH & MT1389S
Show LOGO? memory operates and the FLASH access time
properly?
whether is suitable or not.
YES

NO
Check connection lines
SDRAM between SDRAM & MT1389S
works properly? and the SDRAM is damaged.
YES

MT1389S NO Check the related

VIDEO outputs circuit of MT1389S.
properly?
YES
YES

Have TV NO Check the filtering and amp

signal output? circuit of TV signal.

YES

Check AV cable
connection to TV set.

Does Normal
tray move inside NO NO Check the load
when it is not at closed TROUT & TRIN OPEN & CLOSE switch
position? signals?
YES

Normal NO Check the tray control I/O

TRCLOSE & TROPEN pins on MT1389S & AM5890.
signal?
YES YES

Normal NO Check the tray control

LOAD+ & LOAD- amplifying circuit on Motor driver.
signal?
YES

Check the cable connection

B
between main PCBA and loader.

3-7
 ELECTRICAL TROUBLESHOOTING GUIDE

Does
the SLED move NO Motor NO Check the connection
to inner side when it is driver STBY pin line of STBY signal.
at outter position? is high?
YES

Is FMSO NO Check the related

DC level higher circuit of FMSO.
than 1.4V?
YES

YES SL+ NO Check the amp circuit

and SL- output on motor driver.
properly?
YES

Check the cable

connection with MECHA.

Do not put in
disc and tray close.

Optical Lens NO Proper NO Check FOSO connection on

has movements for FOSO outputs to
searching motor driver? MT1389S and motor dirver.
focus?
YES

Proper NO Check the amp circuit

YES
F+ & F- on motor dirver.
outputs?
YES

Check cable connect on

C with pick-up head.

3-8
 ELECTRICAL TROUBLESHOOTING GUIDE

Laser turns NO NO Check the laser power circuit

LD01 or LD02 on MT1389S and connecting
on when reading output properly?
disc? to power transistor.
YES

Collector NO Check the related circuit on

voltage of power transistor laser power transistor.
is OK?
YES
YES

Check cable connection

between transistor ouput
and pick-up head.

NO
Put disc in? Laser off

YES

Disc ID is NO Proper NO Check the related circuit

RFL signal on
correct? MT1389S? on MT1389S RFL signal.
YES

YES Check LDO1 & LDO2 signal

Does NO Proper NO Check DMSO related

spindle rotate? DMSO signal on
MT1389S. circuit on MT1389S.

YES

YES SP+ & SP- NO Check the spindle control

output properly? amp circuit of motor driver.

YES

D
Check the cable
connection between spindle
and main PCBA.

3-9
 ELECTRICAL TROUBLESHOOTING GUIDE

NO Proper NO Check connections between

Focus on OK? signals on A, B, C, D of MT1389S and pick-up head.
MT1389S
YES

Check FEO signal NO Check the FOSO connection

on MT1389S on MT1389S and motor driver.
YES
YES

Check FOSO
signal on MT1389S

NO Normal NO Check the related

Track on OK? TEO Signal on circuit on MT1389S
MT1389S?
YES

Properly NO
Check the TRSO
TRSO signal on connection on MT1389S
MT1389S? and motor dirver.
YES

NO Check the tracking control

T+ & T- output
properly? amp circuit on motor driver.
YES
YES

Check cable connection

on pick-up head.

NO Check RFO & RFLVL

Disc is play? signal waveform.

YES

3-10
 ELECTRICAL TROUBLESHOOTING GUIDE

Normal NO Normal NO Check the related

Audio output when audio DAC circuit of audio DAC.
disc playback? out?
YES

Check audio filter,

amplify, mute circuit.

YES

Commu-
Normal NO nications between NO Check communication
IR.VFD & Front pannel IR.VFD Front pannel lines on MT1389S.
key functions? key & MT1389S is
normally?

YES YES

NO Check the cable

TEST END
connection on Front pannel.

3-11
DETAILS AND WAVEFORMS ON SYSTEM TEST AND DEBUGGIBG
1. SYSTEM 27MHz CLOCK, RESET, FLASH R/W SIGNAL
1) MT1389S main clock is at 27MHz (X601)

FIG 1-1

2) MT1389S reset is low active

2
3.3V

3
IC601
3 PWR_CTL

4
4
RESET TIME

FIG 1-2

3-12
 3) RS232 waveforn during procedure (Downloading)

5
TXD

RXC 6

FIG 1-3

4) Flash R/W enable signal during download (Downloading)

IC602

7
PRD
7

8 PWR

FIG 1-4

3-13
 2. SDRAM CLOCK
DCLK = 128MHz, Vp-p=2.2
IC603

FIG 2-1

3. TRAY OPEN/CLOSE SIGNAL

IC601

10 TRIN 11

11 TROUT 10

12

12 TRCLOSE
13

13 TROPEN

FIG 3-1

3-14
4. SLED CONTROL RELATED SIGNAL (NO DISC CONDITION)
15

14 FMSO(1.9V/1.4V/1.1V)
14

15 STBY(3.3V)

16
SL+(4.2V/2.8V/1.2V)

17
SL-(4.2V/2.8V/1.5V)
16

17

FIG 4-1

5. LENS CONTROL RELATED SIGNAL (NO DISC CONDITION)

18

18 FOSO(1.5V/1.4V/1.3V)

19 F+(3.2V/2.7V/2.2V)

20 F-(3.2V/2.7V/2.2V)

20

19

FIG 5-1

3-15
6. LASER POWER CONTROL RELATED SIGNAL (NO DISC CONDITION)

IC601
MDI1
21 (0V/180mV) 21
22 LD02
(3.3V/2.3V) 22
23

23
LD01
(3.3V/2.3V)

FIG 6-1

7. DISC TYPE JUDGEMENT WAVEFORM

CN201
24

24 F+

FE IC601 26
25

RFL

26
25

FIG 7-1 (DVD)

3-16
 F+

FE

RFL

FIG 7-2 (DVD)

F+

FE

RFL

FIG 7-3 (CD)

3-17
 F+

FE

RFL

FIG 7-4 (CD)

8. FOCUS ON WAVEFORM

IC601

27
27 FE

28

28 FOSO

29 F+

30 F-

29

30

FIG 8-1 (DVD)

3-18
 FE

FOSO

F+

F-

FIG 8-2 (CD)

9. SPINDLE CONTROL WAVEFORM (NO DISC CONDITION)

DMSO
31 (1.4V/1.8V)
32 SP-
(3.6V/2.4V)
31
32

33 SP+
(3.6V/4.8V)

33

FIG 9-1

3-19
10. TRACKING CONTROL RELATED SIGNAL (SYSTEM CHECKING)

IC601

34 TE

35 TRSO
34
36
T+

37 T-

FIG 10-1 (DVD)

35

CN201

TE

36
TRSO
37
T+

T-

FIG 10-2 (CD)

3-20
11. MT1389S AUDIO OPTICAL AND COAXIAL OUTPUT (SPDIF)

IC601

38

38

FIG 11-1

12. MT1389S VIDEO OUTPUT WAVEFORM

1) Full colorbar signal (CVBS)

JK701 2PIN

FIG 12-1

3-21
13. AUDIO OUTPUT FROM MT1389S

FIG 13-1

3-22
 CONNECTOR PICTURE
1. ALL CONNECTOR PICTURE

3-23
2. MAIN BOARD CONNECTOR PICTURE

3-24
3. CN201 CONNECTOR PICTURE

CN201 (MD 23PIN)

4. CN202 CONNECTOR PICTURE

CN202 (MD 9PIN)

3-25
5. CN601 CONNECTOR PICTURE

CN601 (Front 12PIN)

6. CN602 CONNECTOR PICTURE

CN602 (POWER 10PIN)

3-26
7. CN604 CONNECTOR PICTURE

CN604 (USB 4PIN)

8. CN605 CONNECTOR PICTURE

CN605 (KARAOKE 4PIN)

3-27
9. CN705 CONNECTOR PICTURE

CN705 (5.1ch 12PIN)

3-28
 DISC 3.3V
3.3VA IC607 IC604
CS6340 KA741 USB,Karaoke
IC603 OP-AMP
ADC JACK
IC604 64M bit
DVD : A,B,C,D,RF FLASH ROM SDRAM
CD : A,B,C,D,E,F,RF
(16M)
SPINDLE ACLK ADC_DATA
MOTOR PICK MDI ABCK
M ROMADD[0:11]
UP RAMCAS
CDLD,DVDLD,VC20
ALRCK
RAMRAS
RAMCS1 ADC_RST

,USBN
RAMCS0
LOADING SLED RAMBA

ROMDAT[00:15]
RAMWE

USBP

MEMADD[0:19]
MEMRD
MEMWR
30MHz

ROMDATA[0:15]
MOTOR (FEEDING)
MOTOR Pick-up RAMCKE
PCLK

DECK MECHANISM
M M 3.3VA
1.8VA
DP11 3.3VA IC605
I2CDAT
AT24C08A
I2CCLK
EEPROM
1. OVERALL BLOCK DIAGRAM

LOAD[+,-]
SP[+,-]

SLED[+,-]
IC601 12V

FOCUS[+,-]
TRACK[+,-]
APWM_L +/= L
IC702
MT1389S APWM_R +/= MC4580 R
TRIN, TROUT OP-AMP

3-29
OP(+,-)
5.6VA(M)

IC201 FMSO, DMSO,TRSO,FOSO

AM5890S(5Ch) STBY, TROPEN, TRCLOSE RF+DSP+5.1ch+karaoke+HDMI Tx + MPEG IC
Motor Drive
RCG_SEL
Voltage RESET 27MHz
SPDIF
scart(16:9)
G/Y

R/Pr
B/Pb

detection
CVBS
S-Video YC

5V

FP CLK
FP STB

FP DATA
IC701
PWR_CTL_H VIDEO
BLOCK DIAGRAMS

RESET BUFFER
5V Circuit

IR RCV
To Fro
Front IC
3.3VA
IR
AC 90V~240V POWER
50HZ/60Hz Receiver
Receive TX[ 0-2
-2 ] ± H.P.
H. P.D
IC201 1.8VA
BOARD 5.6VA(M) TXC ± OPTICAL

+12V

3.3V

COAXIAL
HDMI
S-VIDEO OPTIO N
JACK
JACK
 OP AMP

RECTIFIER(14V) LPF 12V

Video Buffer

5V

RECTIFIER(5.6V)
LPF
Motor Drive IC 1.8V
2. POWER (SMPS) BLOCK DIAGRAM

5.6VA(M)

3-30
TRANS

SWITCHING IC
MPEG
RemoconReceiver
Flash Memory

3.3VA

RECTIFIER
RECTIFIER(3.3V) LPF
3.3V

AC100~240V
SDRAM
LED Clock,Driver
PWR CTL
FEED B.
 AUDIO
O Interf
In terf ace
VIDEO
VID O Interf
In terf ace

AL
AR
VIDEO
VID O Interf
In terf ace

D_MUTE
5V

CVBS

CVBS
Y_G_OUT

R_SY_OUT

B_SC_OUT

B_SC_OUT
R_SY_OUT
Y_G_OUT
IC701
VIDEO
BUFFER

ASPDIF(COAXIAL) AUDIO
AUD
ASPDIF(Optica l) Interf ace
Interf

AL_R
AR_R
CENTER
5.1C
5. 1CH
H.P.D IC601(M
(MPEG
PEG + DSP
D SP + RF)
RF Opt
Option
WOOFER

3-31
HDMI MT1389S
3. MPEG & MEMORY BLOCK DIAGRAM

TX [0-2 ] , TXC
I2Cdata I2CLK IC605
EEPROM
RAMDAT[00:15 ]
IC603
IC201 64M bit
AM5890S(5Ch) RESET SDRAM
RAMADD[0:11]
Motor Driver RAMCAS -
RAMRAS -
RAMCS1 -
RAMCS0 -
RAMBA
RAMWE -
X601
X60 RAMCKE
PCLK
AD[0:19 ]
DA[0 :15 ]

DIN ,DOUT
POWER, IR
27MH
27MHz
USBP,USBN
RESE T,W R-, CS0-

LEDD DRI
DRIVE USB IC604
IC(
IC(IC901)
C901) JACK FLASH MEMORY
(16 M ) : EXCEL, SST, MX
 X601
27MHz
X-TAL
ALPC

CDLD(LD01),DVDLD(LD02),V20
IOA
IC601
PICK MDI1
UP MTK1389S
(IM) DVD : A,B,C,D,RF
DVDPLAYER
CD : A,B,C,D,E,F,RF
ONE CHIP
4. SERVO BLOCK DIAGRAM

PICKSEL1

TRIN,TROUT,

3-32
FMSO,DMSO
FOSO, TRSO
TROPEN,
F+, F-, TRCLOSE,
T+, T- STBY
IC201
SL+, SL- AM5890S(5Ch)
M/D LOAD+,LOAD- Motor Driver
(DP11)
SP+,SP-
RESET
Voltage
detection

OP+, OP-
 RGB_H
16_9_H

Y
CVBS

Y CVBS

Y_C MIX
C V.OUT
C
Mpeg IC
Y(G) Y_G Y
MT1389S Pb Y
Pb(B) Pb_B_SC
5. VIDEO & HDMI BLOCK DIAGRAM

IC601 Pr(R) Pr_R_SY Pr

Pb

3-33
Pr
SC S-VIDEO

SY

TX[0- 2] ± , TXC ±

H.P.D

HDMI JACK
 MPEG A_L
A Out "L"
MT1389S AMP A out "R" JACK
A_R MC4580M
IC601
6. AUDIO BLOCK DIAGRAM

IC702
MUTE

MUTEC S/W

Audio

3-34
AL_R
8DAC AR_R
CENTER
WOOFER

COAXl _SPDIF
Coaxial 5.1ch
Serial Stereo
Digital Out Connector
Optical _SPDIF
Optical Option
 IMPORTANT SAFETY NOTE :

WHEN SERVICING THIS CHASSIS, UNDER NO CIR- EASY IDENTIFICATION. THIS CIRCUIT DIAGRAM MAY 1. Shaded( ) parts are critical for safety. Replace only
CIRCUIT DIAGRAMS CUMSTANCES SHOULD THE ORIGINAL DESIGN BE
MODIFIED OR ALTERED WITHOUT PERMISSION
OCCASIONALLY DIFFER FROM THE ACTUAL CIR-
CUIT USED. THIS WAY, IMPLEMENTATION OF THE
with specified part number.
2. Voltages are DC-measured with a digital voltmeter dur-
FROM THE NAD. ALL COMPONENTS SHOULD BE LATEST SAFETY AND PERFORMANCE IMPROVE- ing Play mode.
1. POWER (SMPS) CIRCUIT DIAGRAM REPLACED ONLY WITH TYPES IDENTICAL TO
THOSE IN THE ORIGINAL CIRCUIT. SPECIAL COMPO-
MENT CHANGES INTO THE SET IS NOT DELAYED
UNTIL THE NEW SERVICE LITERATURE IS PRINTED.
NENTS ARE SHADED ON THE SCHEMATIC FOR

No Power
14VA No Power 12V No Power
D105~D108 is Defective
D125 is Defective Q123 is Defective

5.6VA No Power
D123 is Defective

5.0V No Power
Q126 is Defective

Switching Error
IC101is Defective

3.3VA No Power
D121 or D122 are Defective
No Power 3.3V No Power
FR101 is Defective Q121 is Defective

Switching Error
IC102,IC103 are Defective

A B C D E F G H I J K L M N O P Q R S T

3-35 3-36
2. MPEG CIRCUIT DIAGRAM

3-37 3-38
3. SERVO CIRCUIT DIAGRAM

3-39 3-40
4. JACK CIRCUIT DIAGRAM

3-41 3-42
5. SCART CIRCUIT DIAGRAM (OPTION)

3-43 3-44
6. USB CIRCUIT DIAGRAM 7. KEY CIRCUIT DIAGRAM

3-45 3-46
8. TIMER CIRCUIT DIAGRAM

3-47 3-48
• CIRCUIT VOLTAGE CHART
MODE STOP PLAY MODE STOP PLAY MODE STOP PLAY MODE STOP PLAY MODE STOP PLAY MODE STOP PLAY MODE STOP PLAY MODE STOP PLAY
PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO.
IC201(AM5869S) 32 1.578 1.359 95 3.256 3.252 158 3.266 3.258 221 1.617 1.615 27 0.002 0.001 41 0.002 0.001 6 5.57 5.54
1 1.392 1.397 33 2.431 1.824 96 3.286 3.276 159 4.82 4.82 222 2.261 2.249 28 0.012 0.013 42 1.339 0.796 7 5.57 5.54
2 1.705 1.637 34 2.593 1.828 97 0.021 0.078 160 1.842 1.829 223 1.617 1.613 29 1.376 1.561 43 3.278 3.267 8 12.21 12.13
3 1.375 1.436 35 2.196 1.684 98 3.227 3.232 161 4.84 4.84 224 0 0 30 0.528 0.202 44 1.117 0.885 Q201
4 1.393 1.396 36 1.391 1.834 99 3.159 3.151 162 0.021 0.017 225 1.619 1.611 31 1.706 1.766 45 1.217 1.009 Emitter 3.297 3.266
5 1.243 1.238 37 1.391 1.466 100 0.128 0.127 163 0.002 0.002 226 1.617 1.611 32 0.436 0.775 46 0.002 0 Collector 0.384 0.034
6 0.01 0.01 38 0.008 0.009 101 3.276 3.275 164 1.331 1.33 227 1.616 1.61 33 0.961 1.188 47 1.231 1.144 Base 3.237 3.221
7 0.02 0.02 39 1.391 1.391 102 3.276 0 165 3.099 3.086 228 3.286 3.249 34 0.441 0.587 48 1.473 0.745 Q202
8 5.589 5.53 40 1.388 1.382 103 3.276 3.277 166 3.099 3.086 229 3.286 3.248 35 0.588 1.134 49 3.279 3.267 Emitter 3.301 3.039
9 0.001 0 41 1.387 1.422 104 3.276 3.278 167 0.345 0.208 230 1.618 1.614 36 0.365 0.729 50 1.742 1.127 Collector 0.385 2.328
10 0.001 0 42 0.002 0.001 105 3.251 3.278 168 0.001 0.001 231 1.616 1.611 37 3.267 3.241 51 1.786 1.281 Base 3.242 2.305
11 2.729 2.771 43 1.859 1.856 106 3.264 3.276 169 0.001 0.001 232 0.003 0.003 38 1.383 1.442 52 0.002 0.001 Q205
12 2.729 2.687 44 0.011 0.008 107 0.023 0.024 170 0.001 0.001 233 3.286 3.249 39 0.432 1.291 53 0.828 1.051 Emitter 0 0.002
13 2.733 2.686 45 0.011 0.008 108 3.295 3.293 171 0.003 0.004 234 1.841 1.827 40 1.505 1.536 54 0.002 0.001 Collector 0.008 4.887
14 2.733 2.757 46 3.281 3.272 109 2.991 3.011 172 1.842 1.831 235 0.002 0.002 41 0.413 0.847 IC606(S524C80D80-SCB1) Base 0.651 0.019
15 2.739 2.701 47 0.002 0.002 110 0.021 0.024 173 0.002 0.001 236 0.003 0.003 42 1.637 1.527 1 0.002 0 Q206
16 2.739 2.725 48 0.819 0.794 111 2.293 1.965 174 0.002 0.002 237 1.841 1.827 43 0.447 1.028 2 0.002 0 Emitter 0 0.001
17 2.734 3.725 49 1.859 1.854 112 0.024 0.081 175 0.001 0.001 238 0.871 0.868 44 1.339 1.142 3 0.002 0 Collector 0 0.179
18 2.734 1.656 50 0.002 0.002 113 0.972 0.659 176 0.002 0.003 239 0.887 0.868 45 2.012 1.846 4 0.002 0 Base 3.234 0.022
19 5.598 5.55 51 0.971 0.864 114 0.859 0.643 177 0.002 0.002 240 1.071 0.864 46 0.001 0.001 5 3.285 3.252 Q207
20 3.277 3.253 52 0.971 0.717 115 0.982 0.648 178 1.845 1.832 241 1.035 0.822 47 0.001 0.001 6 3.285 3.251 Emitter 0 0.001
21 5.598 5.54 53 3.261 0.017 116 1.032 0.667 179 0.002 0.002 242 0.002 0.002 48 0.014 0.026 7 0.002 0 Collector 0 0.001
22 0.001 0 54 3.241 0.022 117 1.507 0.945 180 0.002 0.002 243 3.202 3.179 IC603(HY57V64) 8 3.289 3.252 Base 0.008 4.839
23 1.395 1.734 55 1.848 1.851 118 3.286 3.277 181 0.002 0.002 244 1.636 1.641 1 3.281 3.239 IC607(CS5340) Q208
24 3.275 3.251 56 1.954 2.257 119 1.129 0.876 182 0.637 0.032 245 0.321 1.549 2 1.264 1.141 1 3.283 3.247 Emitter 1.751 1.705
25 5.574 5.51 57 1.884 2.054 120 1.119 0.813 183 0.701 0.034 246 1.986 1.543 3 3.281 3.239 2 0.026 0.024 Collector 1.885 1.886
26 1.392 1.391 58 1.947 2.239 121 1.251 1.317 184 0.003 0.003 247 0.221 1.517 4 1.154 1.055 3 3.287 3.251 Base 2.482 2.461
27 1.392 1.391 59 1.694 1.604 122 0.814 0.547 185 0.496 0.127 248 3.259 3.244 5 1.145 1.077 4 2.929 2.909 Q601
28 0.019 3.197 60 1.785 1.783 123 1.731 1.323 186 3.251 3.237 249 0.002 0.002 6 0.002 0 5 0.001 0.001 Drain 3.296 3.271
29 0 0 61 1.816 2.346 124 1.686 1.234 187 2.614 2.567 250 3.259 2.243 7 1.504 1.021 6 4.911 4.88 Gate 3.107 3.093
30 0 0 62 1.997 1.652 125 1.414 1.245 188 0.003 0.002 251 0.691 1.711 8 1.005 1.241 7 0.022 0.025 Source 4.912 4.912
IC601(MT1389S) 63 0.127 0.125 126 1.229 0.751 189 0.676 0.659 252 1.375 1.366 9 3.281 3.241 8 0.022 0.025 Q702
1 1.728 1.694 64 0.012 0.015 127 1.175 0.727 190 3.251 3.238 253 3.236 1.424 10 1.003 1.069 9 3.286 3.253 Emitter 0.001 0.001
2 1.146 1.826 65 3.285 3.277 128 1.095 0.775 191 0.498 0.281 254 1.368 1.788 11 0.843 0.633 10 2.448 2.439 Collector 0.005 0.002
3 0.874 0.883 66 3.285 3.276 129 1.326 0.739 192 0.002 0.002 255 0.002 0.002 12 0.002 0 11 2.448 2.437 Base 0.716 0.667
4 3.259 3.243 67 1.393 1.093 130 0.055 0.046 193 1.212 1.207 256 1.723 1.718 13 0.968 0.782 12 2.442 2.434 Q703
5 0.002 0.002 68 1.759 1.806 131 3.286 3.276 194 1.289 1.203 IC602(ES29LV160ET) 14 3.284 3.241 13 4.89 4.89 Emitter 3.269 3.257
6 0.381 0.381 69 1.251 3.043 132 2.296 1.916 195 3.251 3.239 1 1.392 0.118 15 2.316 1.389 14 0.002 0 Collector 3.239 3.115
7 0.391 0.361 70 2.245 3.006 133 3.001 2.834 196 0.016 0.018 2 2.326 0.339 16 3.181 3.001 15 0.346 0.346 Base 2.558 3.247
8 0.376 0.353 71 1.249 3.131 134 3.159 3.093 197 0.016 0.018 3 0.883 3.065 17 3.022 2.748 16 3.283 3.246 Q705
9 0.382 0.346 72 0.305 0.712 135 3.065 3.066 198 0.024 0.022 4 1.468 0.338 18 3.098 2.934 IC701(MM1692XVBE) Emitter 0.001 0.001
10 1.741 1.708 73 2.466 1.706 136 2.815 2.669 199 0.024 0.022 5 1.247 3.163 19 2.856 3.239 1 4.859 4.83 Collector 0.005 0.003
11 2.004 2.048 74 2.759 1.332 137 1.473 1.532 200 0.024 0.023 6 0.299 0.619 20 1.485 1.233 2 2.284 2.276 Base 0.726 0.671
12 2.001 2.045 75 0.011 0.013 138 1.667 1.572 201 0.128 3.248 7 2.478 1.645 21 1.679 1.229 3 2.436 2.427 Q706
13 2.003 2.056 76 0.011 0.013 139 0.038 0.093 202 0.027 0.023 8 2.767 1.648 22 0.039 0.097 4 1.851 1.786 Emitter 0.002 0.002
14 2.004 2.043 77 2.079 1.895 140 0.041 0.612 203 0.024 1.523 9 0.012 0.014 23 0.411 0.715 5 4.861 4.84 Collector 0.082 0.083
15 0.769 0.439 78 0.011 0.012 141 2.061 1.647 204 0.023 1.608 10 0.021 0.014 24 2.076 1.238 6 1.847 1.691 Base 0.729 0.727
16 0.769 0.439 79 1.369 1.523 142 1.842 1.825 205 0.023 1.635 11 3.274 3.242 25 2.318 1.775 7 0.014 0.013 Q707
17 1.996 1.982 80 1.705 1.803 143 2.304 1.994 206 2.915 1.321 12 3.266 3.239 26 1.384 1.507 8 2.282 2.271 Emitter 0.001 0.001
18 1.996 2.241 81 0.002 0.002 144 1.372 1.534 207 3.266 3.256 13 3.268 3.244 27 3.279 3.241 9 2.255 2.271 Collector 0.085 0.081
19 0 0.179 82 0.585 0.854 145 3.286 3.277 208 0.023 0.024 14 3.268 3.244 28 0.002 0.001 10 0.003 0.003 Base 0.728 0.728
20 0 0.179 83 0.971 0.956 146 1.479 1.431 209 0.023 0.024 15 1.204 0.776 29 1.511 1.381 11 2.245 2.252 Q708
21 3.213 2.352 84 1.561 1.616 147 3.261 3.276 210 0.018 0.021 16 0.014 0.015 30 1.543 1.649 12 2.229 2.239 Emitter 0.001 0.001
22 3.213 2.352 85 1.547 1.469 148 0.002 0.002 211 0.019 3.218 17 0.102 3.085 31 1.651 1.539 13 1.961 1.729 Collector 0.034 0.035
23 3.237 3.242 86 1.683 0.974 149 0.032 0.039 212 1.831 1.829 18 2.006 1.765 32 1.705 1.508 14 1.945 1.727 Base 0.728 0.727
24 2.241 2.799 87 0.021 0.024 150 0.079 0.081 213 0 0 19 1.114 1.354 33 0.054 0.084 15 1.901 1.701 Q709
25 0.773 1.367 88 1.171 1.127 151 0.051 0.054 214 2.945 2.936 20 2.285 2.265 34 0.087 0.083 16 2.231 2.242 Emitter 2.271 2.254
26 0.002 0.002 89 1.368 1.117 152 1.444 1.529 215 1.539 1.533 21 1.698 2.084 35 0.033 0.036 IC703(MC4580) Collector 4.86 4.86
27 2.516 2.764 90 0.002 0.002 153 1.489 1.561 216 3.241 3.251 22 1.953 2.118 36 0 0 1 5.57 5.54 Base 2.921 2.902
28 1.995 2.003 91 0.025 0.024 154 1.459 1.521 217 1.892 1.698 23 1.891 1.945 37 3.271 3.246 2 5.57 5.54
29 1.389 1.388 92 1.998 1.846 155 1.516 1.503 218 0.002 0.002 24 1.964 2.175 38 1.518 1.462 3 5.57 5.54
30 1.374 1.489 93 1.876 1.828 156 3.288 3.275 219 0.002 0.002 25 2.087 1.869 39 2.316 1.538 4 0.001 0.001
31 1.579 1.364 94 3.254 3.257 157 3.127 3.125 220 0.002 0.002 26 0.012 0.014 40 0 0 5 5.57 5.54

3-49 3-50
 PLAY
LOCATION SPEC
+ -
C642 33μ F/16V 1.858 0.002
C666 100μ F/6.3V 3.244 0.003
C6C1 10μ F/16V 12.251 0
C6C2 10μ F/16V 11.556 0
C6C6 10μ F/16V 3.257 0.001
C6C9 220μ F/16V 3.259 0.001
C6E0 47μ F/6.3V 2.758 0.001
C6E1 10μ F/16V 1.372 0.002
C6E2 47μ F/6.3V 1.396 0.002
C6E3 220μ F/6.3V 3.239 0.003
C6E4 220μ F/6.3V 3.268 0
C6E5 10μ F/16V 3.261 0.002
C6E6 100μ F/6.3V 3.165 0.003
C6E7 47μ F/6.3V 2.012 0.002
C6E8 10μ F/16V 1.852 0.002
C6E9 10μ F/16V 3.227 0.002
C202 220μ F/6.3V 3.257 0.001
C205 47μ F/6.3V 3.252 3.209
C206 47μ F/6.3V 3.252 2.254
C217 100μ F/6.3V 4.884 0.002
C220 220μ F/16V 5.515 0.016
C240 220μ F/6.3V 1.888 0.001
C242 10μ F/16V 3.266 0.002
C703 22μ F/16V 2.438 0.002
C704 47μ F/6.3V 4.859 0.002
C706 10μ F/16V 4.817 0.002
C728 47μ F/16V 12.256 0.145
C730 22μ F/16V 5.595 1.609
C731 47μ F/16V 5.599 0.002
C732 22μ F/16V 5.595 1.611
C734 22μ F/16V 5.595 0.006
C735 22μ F/16V 5.595 0.006

3-51 3-52
PRINTED CIRCUIT BOARD DIAGRAMS
1. MAIN P.C.BOARD
(TOP VIEW) (BOTTOM VIEW)

3-53 3-54
2. POWER (SMPS) P.C.BOARD
(TOP VIEW) (BOTTOM VIEW)

3. KEY P.C.BOARD 4. TIMER P.C.BOARD

(TOP VIEW) (TOP VIEW)

(BOTTOM VIEW) (BOTTOM VIEW)

3-55 3-56
5. SCART P.C.BOARD (OPTION)
(TOP VIEW) (BOTTOM VIEW)

6. USB P.C.BOARD
(TOP VIEW) (BOTTOM VIEW)

3-57 3-58
 SECTION 4
MECHANISM (DP-12V)

CONTENTS

DECK MECHANISM PARTS LOCATIONS

• Top View......................................................................................................................................4-2
• Top View(without Tray Disc) .....................................................................................................4-2
• Bottom View ...............................................................................................................................4-2

DECK MECHANISM DISASSEMBLY

1. Main Base ....................................................................................................................4-3
1-1. Clamp Assembly Disc .........................................................................................................4-3
1-1-1. Plate Clamp ..............................................................................................................4-3
1-1-2. Magnet Clamp ..........................................................................................................4-3
1-1-3. Clamp Upper ............................................................................................................4-3

2. Tray Disc ......................................................................................................................4-3

3. Base Assembly Sled ...................................................................................................4-4

3-1. Gear Feed...........................................................................................................................4-4
3-2. Gear Middle ........................................................................................................................4-4
3-3. Gear Rack...........................................................................................................................4-4

4. Rubber Rear.................................................................................................................4-4
5. Frame Assembly Up/Down.........................................................................................4-5
6. Belt Loading ................................................................................................................4-5
7. Gear Pulley ..................................................................................................................4-5
8. Gear Loading ...............................................................................................................4-5
9. Guide Up/Down ...........................................................................................................4-5
10. PWB Assembly Loading...........................................................................................4-5
11. Base Main...................................................................................................................4-5

EXPLODED VIEW
1. Deck Mechanism Exploded View ..............................................................................4-7

4-1
 DECK MECHANISM PARTS LOCATION
• TOP VIEW (WITHOUT TRAY) Procedure Disass Fig-
Parts Fixing Type
Starting No. embly ure

1 Main Base 4-1

Clamp Assembly
1 2 4-1
Disc

1, 2 3 Plate Clamp 4-1

1, 2, 3 4 Magnet Clamp 4-1

1, 2, 3, 4 5 Clamp Upper 4-1

1 6 Tray Disc 4-2

1, 6 7 Base Assembly Sled 4-3

4 Screws,
1, 2, 6 8 Gear Feed 1 Connector 4-3
1 Locking Tabs

1, 2, 6, 8 9 Gear Middle

1, 2, 6, 8,
10 Gear Rack 1 Screw 4-3
• TOP VIEW (WITH TRAY) 9

1, 2, 7 11 Rubber Rear 4-3

Frame Assembly
1, 2, 7 12 1 Screw Bottom 4-4
Up/Down

1, 2 13 Belt Loading 1 Locking Tab 4-4

1, 2 ,13 14 Gear Pulley 4-4

1, 2, 13, 14 15 Gear Loading 1 Locking Tab 4-4

1, 2, 7, 12,
16 Guide Up/Down 4-4
13, 14

1 Locking Tab
1, 2, 13 17 PWB Assembly
1 Hook Bottom 4-4
Loading
2 Screw

1, 2, 7, 12,
13, 14, 15, 18 Base Main 2 Locking Tabs 4-4
16, 17

• BOTTOM VIEW

Note
When reassembling, perform the procedure in
reverse order.
The “Bottom” on Disassembly column of above
Table indicates the part should be disassembled
at the Bottom side.

4-2
 DECK MECHANISM DISASSEMBLY

MAIN BASE TRAY DISC

DISC CLAMP ASSEMBLY
PLATE CLAMP

MAGNET CLAMP

CLAMP UPPER

(Fig. A)
HOLDER BASE MAIN

BASE MAIN LEVER

BASE MAIN

BOTTOM SIDE VIEW

FIG. 4-1 FIG. 4-2

1. MAIN BASE (FIG. 4-1) 2. TRAY DISC (FIG. 4-2)

1-1. Clamp Assembly Disc 1) Insert and push a Driver in the emergency eject
1) Place the Clamp Assembly Disc as Fig. (A) hole(A) at the right side, or put the Driver on the
2) Lift up the Clamp Assembly Disc in direction of Lever(B) of the Gear Emergency and pull the
arrow(A). Lever(B) in direction of arrow so that the Tray
3) Separate the Clamp Assembly Disc from the Disc is ejected about 15~20mm.
Holder Clamp. 2) Pull the Tray Disc until it is separated from the
1-1-1. Plate Clamp Base Main completely.
1) Turn the Plate Clamp to counterclockwise
direction and then lift up the Plate Clamp.
1-1-2. Magnet Clamp
1-1-3. Clamp Upper

4-3
 RUBBER DAMPER
Distinguish upper and
lower sides
(Assemble with care)
(S2)

RUBBER DAMPER

(S2) RUBBER DAMPER

(S2) Distinguish upper and
lower sides
(Assemble with care)

BASE PU

(S2)

GENERAL PICK UP ASSEMBLY

GEAR RACK

SPINDLE MOTOR ASSEMBLY

FIG. 4-3

3. BASE ASSEMBLY SLED (FIG. 4-3) 3-3. Gear Rack

1) Release the Scerw (S3)
1) Release 4 Screw (S2).
2) Disconnect the FFC Connector (C1)
3-1. Gear Feed 4. RUBBER REAR (FIG. 4-3)
3-2. Gear Middle

4-4
 GUIDE UP/DOWN

GEAR LOADING

GEAR PULLEY

SCREW INSERTION
TORGUE CONTROL
(800gf DOWN) BASE MAIN
(L4)

BELT LOADING

(H1)
PWB ASSEMBLY LOADING (C2)

(S5)

BASE MAIN

(A) (A)

(B) UP/DOWN FRAME ASSEMBLY

(L5) (A)
GUIDE UP/DOWN
FIG. (A)
(B)
FIG. (B)
(C) GUIDE UP/DOWN
(B)

GUIDE UP/DOWN
FIG. (C)
FIG. 4-4

5. FRAME ASSEMBLY UP/DOWN (FIG. 4-4) 8. GEAR LOADING (FIG. 4-4)

Note 9. GUIDE UP/DOWN (FIG. 4-4)
Put the Base Main face down (Bottom Side) 1) Move the Guide Up/Down in direction of
1) Release the screw (S4) arrow(A) as Fig.(A)
2) Unlock the Locking Tab (L3) in direction of arrow 2) Push the Locking Tab(L5) down and then lift up
and then lift up the Frame Assembly Up/Down to the Guide Up/Down to separate it from the Base
separate it from the Base Main. Main.
Note Note
• When reassembling move the Guide Up/Down in When reassembling place the Guide Up/Down as
direction of arrow(C) until it is positioned as Fig.(C) and move it in direction arrow(B) until it is
Fig.(C).
• When reassembling insert (A) portion of the locked by the Locking Tab(L5). And confirm the Guide
Frame Assembly Up/Down in the (B) portion of Up/Down as Fig.(A)
the Guide Up/Down as Fig.(B) 10. PWB ASSEMBLY LOADING (FIG. 4-4)
6. BELT LOADING(FIG. 4-4) Note
Note Put the Base Main face down(Bottom Side)
Put the Base Main on original position(Top Side) 1) Release 1 Screws(S5)
2) Unlock the Loading Motor (C2) from the Hook
7. GEAR PULLEY (FIG. 4-4) (H1) on the Base Main.
1) Unlock the Locking Tab(L4) in direction of 3) Unlock 2 Locking Tabs(L6) and separate the
arrow(B) and then separate the Gear Pulley from PWB Assembly Loading from the Base Main.
the Base Main
11. BASE MAIN (FIG. 4-4)
4-5
MEMO

4-6
EXPLODED VIEW
1. DECK MECHANISM EXPLODED VIEW
DP-12V

A26

001
A01
A02 002
439 003
018

013

014
020

017

435
015B 016
015
015A

010
440

026 442

012

442

012
442
037
012
A03

019

4-7 4-8
MEMO MEMO

4-9 4-10
NOTES) If you want to purchase NOTES) Warning
Flash memory, you must order Parts that are shaded are critical with
" IC602A " respect to risk of fire or electrical
shock.

SECTION 5 REPLACEMENT PARTS LIST

MODEL : T517C/T517CT(NAD,SWEDEN) Not Service Part
RUN DATE : 17-JUNE-08
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
*** INDIVIDUAL PARTS ***
250 MBN42830502 Case PRESS PCM 0.825 DV302H-NE PRES T517C
250 MBN42830501 Case PRESS PCM 0.825 DV302H-NE PRES T517CT
275 MGJ37320101 Plate,Ground PRESS STS 301 0.2mm MDD102 USB
276 MEG40359801 Holder MOLD HIPS 60HR DVD DV300 MOLD
283 3580R-T229C Door,Case MOLD ABS HF-380 DVD DVN156 (GR T517C
283 3580R-T229D Door,Case MOLD ABS HF-380 DVD DVN156 (TI T517CT
300 6410RCHP04A Power Cord Assembly HIT-101/H03VVH2-F/2X0.75MM2/70
460 1SZZR-0098H Screw,Customized - + 3MM 8MM MSWR FZW SIN JIN T517C
463 1SZZR-0098G Screw,Customized 1SZZR-0098G FH + 3MM 8MM MSWR T517CT
461 1SZZR-0098L Screw,Customized - + 3MM 16MM MSWR NI PLT SIN
462 1SZZR-0098J Screw,Customized 1SZZ0098J BH + 3MM 6.5MM MSWR
463 1SZZR-0098G Screw,Customized 1SZZR-0098G FH + 3MM 8MM MSWR
465 1SZZR-0097N Screw,Customized - + 3MM 8MM MSWR FZB SIN JIN
470 353-022S Screw,Customized BZN BK (CR +3) SPECIAL + 3MM 6
801 AFN52750438 Manual Assembly,Owners DVD DV302H-E.BSWENNK/T ASS'Y
802 MAY46749440 Box,Master BOX SW3 519 136 299 2 COLOR DV T517C
802 MAY46749442 Box,Master BOX SW3 519 136 299 2 COLOR DV T517CT
803 MFZ47272604 Packing CUTTING EPS DVD DV300-N_NAD 91
804 3880SCS001G Bag CUTTING HDPE 100 100 0.05 BAG NSP
808 534-008C Dry Cell Battery AAA(R03) 1PAIR 1.5V 50MAH AAA
900 6711R2N124D Remote Controller Assembly NAD DV302H-NE 08 DVD-P NAD
*** Accessory Assembly ***
810 6851R-0074B Accessory Assembly VCR LGEIN 1WAY YELLOW 1.2M + 2
811 6850R-PAA2F Cable,Assembly RCA PLUG RCA PLUG 1.2M 1P YELL
812 6850R-PBA2H Cable,Assembly RCA PLUG RCA PLUG 1.2M 2P RED/
*** Deck Assembly,DVD(MD) ***
A26 EAZ38311314 Deck Assembly,DVD DECK/MECHA DP-12V player (IN) NSP
A02 AAN34279702 Base Assembly DP-12 Loading 430mm
013 4400R-0010A Belt MOLD RUBBER DVD DP-9 OTHER LOA
014 4470R-0154A Gear COMPLEX DVD DECK/MECHA DP8 PUL
015 4681R-A015C Motor Assembly,DC DVD DP-9 loading
017 4470R-0176A Gear MOLD POM DVD DP-9 LOADING MO
435 1SZZR-0011A Screw,Customized MACHINE
439 1SZZR-0075A Screw,Customized - + 1.7MM 10MM SWRCH FZW SIN
440 1SZZH-1007B Screw,Customized + D2.0 6MM SWRCH16A/ZNBK 4MM 1
015A 4680R-E008A Motor,DC RF-300EA-1D390(80MM) 2V 90MA 2 NSP
015A EAU36590901 Motor,DC FC08I20TLG-1 2V 100MA 0A 1.37K NSP
015A EAU43506801 Motor,DC JQ24-35H390 2V 90A 28A 0RPM 0R NSP
015B 4560R-0008A Pulley MOLD POM DVD MD MOLD -
016 EBR34880104 PCB Assembly DP-12 FEEDING/LOADING -430mm
018 MEA32088501 Guide MOLD POM(LUCEL N109-LD) DVD PO
020 MAM38555601 Base MOLD ABS XR-401 DP-13 MOLD mai NSP
A03 AAN34281204 Base Assembly DP-12V Sled 430mm
010 EAD34861101 Cable,FFC AT10023270D01 270MM 1.00MM 23P
012 MCQ38556902 Damper EXTRUSION BUTYL RUBBER DECK/ME
019 MDQ38556002 Frame MOLD ABS XR-401 DP-12 MOLD up
037 EAZ40060202 Pick Up Assembly CMS-S77RFV(1) CMS-S77RFV(1) IM

5 - 1
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
442 FAB30124101 Screw,Taptite 1szzr-0064 PWH + B 2.6MM 7MM S
A01 ACA34280801 Clamp Assembly DECK/MECHA DP-12/13 ferrite ty
001 MGJ38556601 Plate PRESS SECC 0.8 dp-13 PRESS upp NSP
002 RAB30611501 Magnet,Ferrite FERRITE 50G NSP
003 MBU38556801 Clamp MOLD POM DECK/MECHA dp-13 MOLD NSP
026 MJS31956302 Tray MOLD ABS XR-401 DVD dp-12 MOLD
*** PCB Assembly,Power(POWER) ***
A47 EBR42200724 PCB Assembly,Power DV300'S SMPS IN WIDE NAD Total
BC101 636-004C Filter,Bead BFS3550R2FD8 70OHM 9X3.5X7.5MM
C101 624-088F Capacitor,Film,DIP PCX2 335 M9663 100nF 10% 275V
C101 624-088J Capacitor,Film,Box ECQU2A104ML 0.1uF 20% 250V MPE ALTERNATE
C101 624-088L Capacitor,Film,DIP 435D UL 250V/ VDE 275V 104 K 1 ALTERNATE
C101 624-088N Capacitor,Film,Box MPX104K2YL UL 250V/ VDE 275V 0 ALTERNATE
C103 0CZZR00011B Capacitor,Unclassified SAMYOUNG,SAMWHA,G-LUXON E-CAP
C104 0CZZR00011B Capacitor,Unclassified SAMYOUNG,SAMWHA,G-LUXON E-CAP
C105 0CQ1031Y519 Capacitor,Film,DIP 230S 2J 103 K 10nF 10% 630V MP
C106 624-087S Capacitor,Unclassified 47PF D 1KV 10% TR B(Y5P)
C108 0CN1040K948 Capacitor,Ceramic,Axial CH UP050 F104Z-A-B Z 100nF -20
C109 624-085D Capacitor,AL,Radial KME5.0TP50VB47M 47uF 20% 50V 1
C111 0CG2220U630 Capacitor,Ceramic,Radial SDE2G222M12BW1 2200pF 20% 400V
C113 0CQ1521N409 Capacitor,Film,DIP HPE 2A 152J TP 1.5nF 5% 100V P
C114 0CQ4721N409 Capacitor,Film,DIP 310M 2A 472 J 4.7nF 5% 100V PE
C121 0CE108BD630 Capacitor,AL,Radial RUS1A102MIS 1000uF 20% 10V 626
C122 0CE3376D638 Capacitor,AL,Radial SMS5.0TP10VB330M 330uF 20% 10V
C123 0CE108EF630 Capacitor,AL,Radial KMG5.0MC16VB1000M 1000uF 20% 1
C123 0CE108BF630 Capacitor,AL,Radial KME4.0CC16VB1000M 1000uF 20% 1 ALTERNATE
C124 0CE3376D638 Capacitor,AL,Radial SMS5.0TP10VB330M 330uF 20% 10V
C126 624-085D Capacitor,AL,Radial KME5.0TP50VB47M 47uF 20% 50V 1
C128 0CQ1042K409 Capacitor,Film,DIP 310M 1H 104 J 100nF 5% 50V PE
C153 0CE4754K638 Capacitor,AL,Radial ESS475M050T1A5B07G 4.7uF 20% 5
C154 0CE1054K638 Capacitor,AL,Radial ESS105M050T1A5B07G 1uF 20% 50V
C155 0CE1076F638 Capacitor,AL,Radial SMS5.0TP16VB100M 100uF 20% 16V
C156 0CN223AK948 Capacitor,Ceramic,Axial CH UP050 F223Z-A-B Z 22nF -20T
C157 0CN223AK948 Capacitor,Ceramic,Axial CH UP050 F223Z-A-B Z 22nF -20T
D101 0DRRE00163A Diode,Rectifier 1F7 1KV 1.3V 5UA 25A 500NSEC R
D101 0DD221009AA Diode,Rectifier ERA22-10 1KV 1.5V 10UA 10A 400 ALTERNATE
D101 0DR400709AA Diode,Rectifier 10SP07U(SUF4007SP) 1KV 1.7V 5U ALTERNATE
D104 0DR104009BA Diode,Rectifier RL104F 400V 1.3V 5UA 30A 150NS
D104 0DRGF00239A Diode,Rectifier FR104E 400V 1.3V 5UA 30A 150NS
D104 0DD010009AC Diode,Rectifier EU01W(R-FORM) 400V 2.5V 10UA 1
D105 0DRRE00203A Diode,Rectifier 1A7 600V 1.1V 5UA 25A - R1 TP
D105 0DRGF00309A Diode,Rectifier 1A5 600V 1.1V 1A 25A 1NSEC R1
D106 0DRRE00203A Diode,Rectifier 1A7 600V 1.1V 5UA 25A - R1 TP
D106 0DRGF00309A Diode,Rectifier 1A5 600V 1.1V 1A 25A 1NSEC R1
D107 0DRRE00203A Diode,Rectifier 1A7 600V 1.1V 5UA 25A - R1 TP
D107 0DRGF00309A Diode,Rectifier 1A5 600V 1.1V 1A 25A 1NSEC R1
D108 0DRRE00203A Diode,Rectifier 1A7 600V 1.1V 5UA 25A - R1 TP
D108 0DRGF00309A Diode,Rectifier 1A5 600V 1.1V 1A 25A 1NSEC R1
D121 0DR158220AA Diode,Schottky 1N5822 950MV 40V 3A 1NSEC 250p
D123 0DR202000AB Diode,Rectifier HER202 100V 1V 5UA 60A 50NSEC
D123 0DSTW00070A Diode,Rectifier HER202-TSC 100V 1V 5UA 60A 50N ALTERNATE
D125 0DR104009BA Diode,Rectifier RL104F 400V 1.3V 5UA 30A 150NS
D125 0DRGF00239A Diode,Rectifier FR104E 400V 1.3V 5UA 30A 150NS
D125 0DD010009AC Diode,Rectifier EU01W(R-FORM) 400V 2.5V 10UA 1
D151 0DS141489BB Diode,Switching 1N4148(26MM) 1V 100V 150MA 500
D151 0DD133009AA Diode,Switching 1SS133 1.2V 90V 400MA 600MA 4N ALTERNATE
FR101 0RM0221K634 Resistor,Cement ICW02M22R20J 2.2OHM 5% 2W 27X1

5 - 2
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
IC101 EAN34789801 IC,PWM Controller STR-A6259H 12.9V TO 15.7V 10V
IC102 6500RDB011B Sensor,Position K1010B 5V DIP BK 4P 4PIN PHOTO
IC102 657-063A Sensor,Position LTV-817B 5V DIP BK 2P PHOTO CO ALTERNATE
IC103 0IPMGUC004B IC,LDO Voltage Regulator TL431 MAX12V 3.3V 600MW TO92 T
IC103 0IKE431000A IC,Voltage Regulator KIA431 36V 36V 700MW TO92 TP 3 ALTERNATE
IC103 0ISS431000A IC,Voltage Regulator KA431AZ 2.495TO36V 36V 770MW T ALTERNATE
L101 EAM34728301 Filter,Line Noise LFU1116H2-01300 35MH 19X18X16M
L121 633-088G Coil,Choke 22KS 22uH - - 8X17MM LEAD - G
L121 6200J000147 Filter,Unclassified LPL0813T-220K ABCO TAPING
L121 6140R-C011A Coil,RF 6140R-C011A 22uH - - 8X17MM LE
L122 633-088G Coil,Choke 22KS 22uH - - 8X17MM LEAD - G
L122 6200J000147 Filter,Unclassified LPL0813T-220K ABCO TAPING
L122 6140R-C011A Coil,RF 6140R-C011A 22uH - - 8X17MM LE
P101 6631R-E078Q Harness,Single GIL-S10/9073 10ST 60mm GIL-S-1
PW101 6630V90108A Connector,Wafer JE202-2L-03 2P 3.96MM 1R ANGLE
Q121 0TR127109AA TR,Bipolar KTA1271Y PNP -5V -35V -30V -0.
Q122 0TR319809AC Transistor Assembly KTC3198 KTC3198 TP KEC - - -BL
Q122 0TR319909AF TR,Bipolar KTC3199-BL NPN 5V 50V 50V 150M ALTERNATE
Q122 0TR534309BA TR,Bipolar 2SC5343L NPN 5V 60V 50V 150MA ALTERNATE
Q123 0TR320309AA TR,Bipolar KTC3203 NPN 5V 35V 30V 800MA 1
Q123 0TR534409AA TR,Bipolar 2SC5344Y NPN 5V 35V 30V 800MA ALTERNATE
Q124 0TR220309AF TR,Bipolar SRA2203 PNP -40V - -50V -0.1A
Q124 0TR103009AF TR,Bipolar KRA103M(KRA2203) PNP -40V 0V - ALTERNATE
Q126 0TR320509AB Transistor Assembly KTC3205-Y(KTC2236A) KTC3205-Y(
Q126 0TR232809AB TR,Bipolar KSC2328A-Y NPN 5V 30V 30V 2A 1 ALTERNATE
Q126 0TR186209AB TR,Bipolar STD1862LY-AT NPN 5V 30V 30V 2A ALTERNATE
R102 0RS0101K619 Resistor,Metal Oxide Film RSD02R1J1R00 1OHM 5% 2W 12.0X4
R103 0RS5602K619 Resistor,Metal Oxide Film SML02R0J56K0 56KOHM 5% 2W 8.6X
R105 0RD0472F608 Resistor,Carbon Film RD-96S1J47R0 47OHM 5% 1/6W 3.2
R121 0RD1001F608 Resistor,Carbon Film RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R122 0RD5600F608 Resistor,Carbon Film RD-96S1J560R 560OHM 5% 1/6W 3.
R123 0RD4702F608 Resistor,Carbon Film RD-96S1J47K0 47KOHM 5% 1/6W 3.
R124 0RD1800F608 Resistor,Carbon Film RD-96S1J180R 180OHM 5% 1/6W 3.
R125 0RD2201F608 Resistor,Carbon Film RD-96S1J2K20 2.2KOHM 5% 1/6W 3
R126 0RD1001F608 Resistor,Carbon Film RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R127 0RN1001F408 Resistor,Metal Film RN-96S1F1K00 1KOHM 1% 1/6W 3.2
R128 0RN3001F408 Resistor,Metal Film RN-96S1F3K00 3KOHM 1% 1/6W 3.2
R130 0RD1002F608 Resistor,Carbon Film RD-96S1J10K0 10KOHM 5% 1/6W 3.
R140 0RD2200F608 Resistor,Carbon Film RD-96S1J220R 220OHM 5% 1/6W 3.
R143 0RD2200F608 Resistor,Carbon Film RD-96S1J220R 220OHM 5% 1/6W 3.
R144 0RD1001F608 Resistor,Carbon Film RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R145 0RD1001F608 Resistor,Carbon Film RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R151 0RD1003F608 Resistor,Carbon Film RD-96S1J100K 100KOHM 5% 1/6W 3
R152 0RD2202F608 Resistor,Carbon Film RD-96S1J22K0 22KOHM 5% 1/6W 3.
T101 6170RNGW05S Transformer,Switching 6170RNGW05S EE2532S 4OHM 2.5mH
V101 656-004C Varistor SVC681D-10A 680V 10% 250pF 10M
ZD101 0DZ330009CA Diode,Zener MTZJT-7733B 33V 30.32TO31.88V
ZD101 0DZ332609AA Diode,Zener GDZJ33B 33V 30.32TO31.88V 65OH ALTERNATE
ZD102 0DZ100009AA Diode,Zener MTZJT-7710B 10V 9.41TO9.9V 30O
ZD102 0DZ102609AB Diode,Zener GDZJ10B(26mm) 10V 9.41TO9.9V 3 ALTERNATE
ZD151 0DZ130009AA Diode,Zener MTZJT-7713A 13V 12.11TO12.75V
ZD151 0DZ132609BB Diode,Zener UZ-13BSA 13V 12.18TO12.71V 13O ALTERNATE
ZD152 0DZ560009CB Diode,Zener MTZJT-775.6C 5.6V 5.61TO5.91V
*** Board Assembly(FRONT) ***
A43 AAX65660901 Board Assembly DVD DV302H-NE BSWENNK Timer+Fr T517C
A43 AAX65660902 Board Assembly DVD DV302H-NE BSWENNT Timer+Fr T517CT
452 1SZZR-0098A Screw,Customized 1SZZR-0098A BH + 3MM 10MM MSWR

5 - 3
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
280 AGL37044005 Panel Assembly,Front DVD DV302H-NE BSWENNK NAD play T517C
280 AGL37044006 Panel Assembly,Front DVD DV302H-NE BSWENNT NAD play T517CT
A50 EBR50464802 PCB Assembly 08 DVD-P NAD TIMER IN _
C901 0CN1040K948 Capacitor,Ceramic,Axial CH UP050 F104Z-A-B Z 100nF -20
C902 0CN1010K518 Capacitor,Ceramic,Axial CH UP025 B101K-A-B Z 100pF 10%
C903 0CN1010K518 Capacitor,Ceramic,Axial CH UP025 B101K-A-B Z 100pF 10%
C905 0CN1020K518 Capacitor,Ceramic,Axial CH UP025 B102K-A-B Z 1nF 10% 5
C906 0CE2274C638 Capacitor,AL,Radial ESS227M6R3T1A5E07G 220uF 20% 6
C907 0CN1020K518 Capacitor,Ceramic,Axial CH UP025 B102K-A-B Z 1nF 10% 5
C908 0CE4764C638 Capacitor,AL,Radial ESS476M6R3T1A5C07G 47uF 20% 6.
R901 0RD4701F608 Resistor,Carbon Film RD-96S1J4K70 4.7KOHM 5% 1/6W 3
R904 0RD3300F608 Resistor,Carbon Film RD-96S1J330R 330OHM 5% 1/6W 3.
R905 0RD5102F608 Resistor,Carbon Film RD-96S1J51K0 51KOHM 5% 1/6W 3.
R908 0RD0391F608 Resistor,Carbon Film CR1/8TA3R9J 3.9OHM 5% 1/8W 3.2
SW901 556-219B Switch,Tact THVV502GAA 1C1P 12VDC 0.05A HO
SW901 556-219D Switch,Tact TSTB-2(THVV502) 1C1P 12VDC 0.0 ALTERNATE
SW901 6600R000036 Switch,Tact EVQ22505R 1C1P 15VDC 0.02A VER ALTERNATE
SW901 EBF40098801 Switch,Tact SKRGAED010 1C1P 12VDC 0.05A VE ALTERNATE
SW902 556-219B Switch,Tact THVV502GAA 1C1P 12VDC 0.05A HO
SW902 556-219D Switch,Tact TSTB-2(THVV502) 1C1P 12VDC 0.0
SW902 6600R000036 Switch,Tact EVQ22505R 1C1P 15VDC 0.02A VER
SW902 EBF40098801 Switch,Tact SKRGAED010 1C1P 12VDC 0.05A VE
SW903 556-219B Switch,Tact THVV502GAA 1C1P 12VDC 0.05A HO
SW903 556-219D Switch,Tact TSTB-2(THVV502) 1C1P 12VDC 0.0
SW903 6600R000036 Switch,Tact EVQ22505R 1C1P 15VDC 0.02A VER
SW903 EBF40098801 Switch,Tact SKRGAED010 1C1P 12VDC 0.05A VE
SW904 556-219B Switch,Tact THVV502GAA 1C1P 12VDC 0.05A HO
SW904 556-219D Switch,Tact TSTB-2(THVV502) 1C1P 12VDC 0.0
SW904 6600R000036 Switch,Tact EVQ22505R 1C1P 15VDC 0.02A VER
SW904 EBF40098801 Switch,Tact SKRGAED010 1C1P 12VDC 0.05A VE
SW905 556-219B Switch,Tact THVV502GAA 1C1P 12VDC 0.05A HO
SW905 556-219D Switch,Tact TSTB-2(THVV502) 1C1P 12VDC 0.0
SW905 6600R000036 Switch,Tact EVQ22505R 1C1P 15VDC 0.02A VER
SW905 EBF40098801 Switch,Tact SKRGAED010 1C1P 12VDC 0.05A VE
SW906 556-219B Switch,Tact THVV502GAA 1C1P 12VDC 0.05A HO
SW906 556-219D Switch,Tact TSTB-2(THVV502) 1C1P 12VDC 0.0
SW906 6600R000036 Switch,Tact EVQ22505R 1C1P 15VDC 0.02A VER
SW906 EBF40098801 Switch,Tact SKRGAED010 1C1P 12VDC 0.05A VE
SW907 556-219B Switch,Tact THVV502GAA 1C1P 12VDC 0.05A HO
SW907 556-219D Switch,Tact TSTB-2(THVV502) 1C1P 12VDC 0.0
SW907 6600R000036 Switch,Tact EVQ22505R 1C1P 15VDC 0.02A VER
SW907 EBF40098801 Switch,Tact SKRGAED010 1C1P 12VDC 0.05A VE
CABLE1 EAD42078701 Cable,FFC AT10012180D02 180MM 1.00MM 12P
CN901 6630R-FB10L Connector,FFC/FPC/PIC 00-6232-012-006-800 12P 1.00MM
CN902 561-712B Connector,Wafer GIL-S-02P-S2L2-EF 2P 2.00MM 1R
CN903 EAD34876602 Harness,Single 2P-150MM (DV3) GIL-S 9073-AN 1
DIG901 6301R2U017U LED Assembly TOF-2504AW-B4 LED CLOCK OASIS
DIG901 6301R2U017R LED Assembly TOF-2504AG-B4 LED CLOCK OASIS ALTERNATE
IC901 EAN48862801 IC,LED Driver PT6962-TX 7 0.5 500MW SOP R/TP
RC901 EAV41920401 Receiver Module AT138ARF1(346HF6N2-B)(ND5100)
RC901 6712R1238HA Receiver Module AT138ARF1(346HF6N2-B) 2.7TO6V ALTERNATE
*** Option Code Assembly(MAIN) ***
A46 EBR42880784 Option Code Assembly DV302H-NE.BSWENNT . .
C202 0CE2274C638 Capacitor,AL,Radial ESS227M6R3T1A5E07G 220uF 20% 6
C205 0CE4764C638 Capacitor,AL,Radial ESS476M6R3T1A5C07G 47uF 20% 6.
C206 0CE4764C638 Capacitor,AL,Radial ESS476M6R3T1A5C07G 47uF 20% 6.
C217 0CE1074C638 Capacitor,AL,Radial SRA5.0TP6.3VM100M 100uF 20% 6.

5 - 4
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
C220 0CE2274F638 Capacitor,AL,Radial SRA5.0TP16VM220M 220uF 20% 16V
C240 0CE1074C638 Capacitor,AL,Radial SRA5.0TP6.3VM100M 100uF 20% 6.
C242 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C642 0CE3364F638 Capacitor,AL,Radial ESS336M016T1A5E07G 33uF 20% 16
C666 0CE1074C638 Capacitor,AL,Radial SRA5.0TP6.3VM100M 100uF 20% 6.
C6C6 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C6C9 0CE2274C638 Capacitor,AL,Radial ESS227M6R3T1A5E07G 220uF 20% 6
C6E0 0CE4764C638 Capacitor,AL,Radial ESS476M6R3T1A5C07G 47uF 20% 6.
C6E1 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C6E2 0CE4764C638 Capacitor,AL,Radial ESS476M6R3T1A5C07G 47uF 20% 6.
C6E3 0CE2274C638 Capacitor,AL,Radial ESS227M6R3T1A5E07G 220uF 20% 6
C6E4 0CE2274C638 Capacitor,AL,Radial ESS227M6R3T1A5E07G 220uF 20% 6
C6E5 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C6E6 0CE1074C638 Capacitor,AL,Radial SRA5.0TP6.3VM100M 100uF 20% 6.
C6E7 0CE4764C638 Capacitor,AL,Radial ESS476M6R3T1A5C07G 47uF 20% 6.
C6E8 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C6E9 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C6Y2 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C703 0CE2264F638 Capacitor,AL,Radial ESS226M016T1A5B07G 22uF 20% 16
C704 0CE4764C638 Capacitor,AL,Radial ESS476M6R3T1A5C07G 47uF 20% 6.
C706 0CE1064F638 Capacitor,AL,Radial ESS106M016T1A5B07G 10uF 20% 16
C728 0CE4764F638 Capacitor,AL,Radial ESS476M016T1A5C07G 47uF 20% 16
C730 0CE2264F638 Capacitor,AL,Radial ESS226M016T1A5B07G 22uF 20% 16
C731 0CE4764F638 Capacitor,AL,Radial ESS476M016T1A5C07G 47uF 20% 16
C732 0CE2264F638 Capacitor,AL,Radial ESS226M016T1A5B07G 22uF 20% 16
C734 0CE2264F638 Capacitor,AL,Radial ESS226M016T1A5B07G 22uF 20% 16
C735 0CE2264F638 Capacitor,AL,Radial ESS226M016T1A5B07G 22uF 20% 16
D201 0DR104009AB Diode,Rectifier RL104R 400V 1.1V 5UA 30A 1NSEC
L201 0LR0102J025 Inductor,Wire Wound,Radial EL0405RA-100J-3 10UH 5% 0V 353
L202 0LR0102J025 Inductor,Wire Wound,Radial EL0405RA-100J-3 10UH 5% 0V 353
Q208 0TR127109AA TR,Bipolar KTA1271Y PNP -5V -35V -30V -0.
C201 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C207 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C218 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C219 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C221 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C222 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C230 0CH1222K562 Capacitor,Ceramic,Chip 0603B222K500CT 2.2nF 10% 50V X
C231 0CH1222K562 Capacitor,Ceramic,Chip 0603B222K500CT 2.2nF 10% 50V X
C235 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C236 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C241 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C602 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C603 0CH1682K512 Capacitor,Ceramic,Chip 0603B682K500CT 6.8nF 10% 50V Y
C604 0CH1473K942 Capacitor,Ceramic,Chip C1608Y5V1H473ZT 47nF -20TO+80%
C605 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C606 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C607 0CH1152K562 Capacitor,Ceramic,Chip 0603B152K500CT 1.5nF 10% 50V X
C608 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C609 0CH1562K562 Capacitor,Ceramic,Chip 0603B562K500CT 5.6nF 10% 50V X
C611 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C613 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C614 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C615 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C619 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C620 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C621 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%

5 - 5
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
C622 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C623 0CK105CD94A Capacitor,Ceramic,Chip 0603F105Z100CT 1uF -20TO+80% 1
C624 0CK105CD94A Capacitor,Ceramic,Chip 0603F105Z100CT 1uF -20TO+80% 1
C625 0CK105CD94A Capacitor,Ceramic,Chip 0603F105Z100CT 1uF -20TO+80% 1
C626 0CK105CD94A Capacitor,Ceramic,Chip 0603F105Z100CT 1uF -20TO+80% 1
C627 0CK105CD94A Capacitor,Ceramic,Chip 0603F105Z100CT 1uF -20TO+80% 1
C628 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C629 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C630 0CH4271K412 Capacitor,Ceramic,Chip C1608C0G1H271JT 270pF 5% 50V C
C631 0CH4221K412 Capacitor,Ceramic,Chip 0603N221J500LT 220pF 5% 50V C0
C632 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C633 0CH1223K562 Capacitor,Ceramic,Chip 0603B223K500CT 22nF 10% 50V X7
C634 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C635 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C636 0CH4150K412 Capacitor,Ceramic,Chip 0603N150J500LT 15pF 5% 50V C0G
C637 0CH4180K412 Capacitor,Ceramic,Chip 0603N180J500LT 18pF 5% 50V C0G
C638 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C639 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C640 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C644 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C645 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C646 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C649 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C650 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C651 0CH1102K562 Capacitor,Ceramic,Chip 0603B102K500CT 1nF 10% 50V X7R
C653 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C655 0CH1473K942 Capacitor,Ceramic,Chip C1608Y5V1H473ZT 47nF -20TO+80%
C656 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C657 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C658 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C659 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C660 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C661 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C662 0CH1102K562 Capacitor,Ceramic,Chip 0603B102K500CT 1nF 10% 50V X7R
C663 0CH4200K412 Capacitor,Ceramic,Chip C1608C0G1H021JT 20pF 5% 50V C0
C664 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C665 0CH1333K562 Capacitor,Ceramic,Chip 0603B333K500CT 33nF 10% 50V X7
C667 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C668 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C669 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C670 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C671 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C672 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C673 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C674 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C675 0CH1103K562 Capacitor,Ceramic,Chip 0603B103K500CT 10nF 10% 50V X7
C676 0CH1222K562 Capacitor,Ceramic,Chip 0603B222K500CT 2.2nF 10% 50V X
C677 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C678 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C679 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C681 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C683 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C684 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C685 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C686 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C687 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C689 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%

5 - 6
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
C690 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C692 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C694 0CH4221K412 Capacitor,Ceramic,Chip 0603N221J500LT 220pF 5% 50V C0
C695 0CH4560K412 Capacitor,Ceramic,Chip 0603N560J500LT 56pF 5% 50V C0G
C696 0CH4221K412 Capacitor,Ceramic,Chip 0603N221J500LT 220pF 5% 50V C0
C6A5 0CH4100K412 Capacitor,Ceramic,Chip 0603N100J500LT 10pF 5% 50V C0G
C6A6 0CH4100K412 Capacitor,Ceramic,Chip 0603N100J500LT 10pF 5% 50V C0G
C6B1 0CK475CD64A Capacitor,Ceramic,Chip C1608Y5V1A475MT 4.7uF 20% 10V
C6B7 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C6Y1 0CH1473K942 Capacitor,Ceramic,Chip C1608Y5V1H473ZT 47nF -20TO+80%
C701 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C707 0CH1105F942 Capacitor,Ceramic,Chip 0603F105Z160CT 1uF -20TO+80% 1
C708 0CH1105F942 Capacitor,Ceramic,Chip 0603F105Z160CT 1uF -20TO+80% 1
C709 0CH1105F942 Capacitor,Ceramic,Chip 0603F105Z160CT 1uF -20TO+80% 1
C710 0CH1105F942 Capacitor,Ceramic,Chip 0603F105Z160CT 1uF -20TO+80% 1
C711 0CH1105F942 Capacitor,Ceramic,Chip 0603F105Z160CT 1uF -20TO+80% 1
C714 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C715 0CH4101K412 Capacitor,Ceramic,Chip 0603N101J500LT 100pF 5% 50V C0
C716 0CH4270K412 Capacitor,Ceramic,Chip 0603N270J500LT 27pF 5% 50V C0G
C718 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C719 0CH4101K412 Capacitor,Ceramic,Chip 0603N101J500LT 100pF 5% 50V C0
C722 0CH4681K412 Capacitor,Ceramic,Chip 0603N681J500LT 680pF 5% 50V C0
C723 0CH4101K412 Capacitor,Ceramic,Chip 0603N101J500LT 100pF 5% 50V C0
C724 0CH4681K412 Capacitor,Ceramic,Chip 0603N681J500LT 680pF 5% 50V C0
C726 0CH1104K942 Capacitor,Ceramic,Chip 0603F104Z500CT 100nF -20TO+80%
C733 0CH4101K412 Capacitor,Ceramic,Chip 0603N101J500LT 100pF 5% 50V C0
C736 0CH4681K412 Capacitor,Ceramic,Chip 0603N681J500LT 680pF 5% 50V C0
C737 0CH4681K412 Capacitor,Ceramic,Chip 0603N681J500LT 680pF 5% 50V C0
CN201 6630XE00123 Connector,FFC/FPC/PIC 04-6232-023-010-000 23P 1.00MM
CN202 6630XE00109 Connector,FFC/FPC/PIC 04-6232-009-010-000 9P 1.00MM
CN705 6630XE00112 Connector,FFC/FPC/PIC JE500-B1.0-T12 12P 1.00MM FFC
D6Y1 0DSRM00118A Diode,Switching DAP202K 1.2V 80V 300MA 4A 4NSE
IC201 EAN33860001 IC,Motor Driver AM5890 5ch dvd-p 4.3to13.2v 9v
IC601 EAN36805202 IC,Digital Signal Processors MT1389S/DE 0.3V 3.6mA 27MHz NO
IC603 0IMMREO001C IC,SDRAM EM638165TS - 6G 64MBIT 1MX16BI
IC606 EAN37730101 IC,EEPROM S-24CS08AFJ-V-1GE 8KBIT 1K X 8
IC6Y1 0ISTL00104A IC,CMOS 74LV86PW 1.0TO3.6V 20mA EXCLUS
IC701 0ILNR00048A IC,Display Driver MM1692XVBE 7V 2.4V 1W TSOP R/T
IC703 EAN52653401 IC,OP Amplifier SA5532ADR 5V TO 15V 0.5mV 0.1%
L204 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L205 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L206 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L207 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L601 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L602 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L603 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L604 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L605 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L606 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L608 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L612 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L613 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L614 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L615 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L620 0LC11608D01 Filter,Bead HB-1M1608-121JT 120OHM 1.6X0.8
L625 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L626 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25

5 - 7
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
L627 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L701 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L702 6200HJC102A Filter,Bead HB-1M2012-102JT 1000OHM 2X1.25
L703 0LCCE00004E Inductor,Multilayer,Chip FI-C2012-103KJT 10UH 10% - 25M
L704 0LCCE00004E Inductor,Multilayer,Chip FI-C2012-103KJT 10UH 10% - 25M
Q201 0TR103709BB TR,Bipolar 2SA1037AK-Q PNP -6V -60V -50V
Q201 0TR150409AC TR,Bipolar KTA1504S-GR PNP -5V -50V -50V
Q201 0TRON80008A TR,Bipolar MSA1162YT1G PNP -7V -60V -50V
Q201 0TRAU80008A TR,Bipolar 2SA1980SY PNP -5V -50V -50V -0
Q202 0TR103709BB TR,Bipolar 2SA1037AK-Q PNP -6V -60V -50V
Q202 0TR150409AC TR,Bipolar KTA1504S-GR PNP -5V -50V -50V
Q202 0TRON80008A TR,Bipolar MSA1162YT1G PNP -7V -60V -50V
Q202 0TRAU80008A TR,Bipolar 2SA1980SY PNP -5V -50V -50V -0
Q205 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q205 0TRON80009A TR,Bipolar BC846ALT1 NPN 6V 80V 65V 100MA ALTERNATE
Q205 0TRAU80017A TR,Bipolar 2SC5343SG NPN 5V 60V 50V 150MA ALTERNATE
Q206 0TRRH80042A FET 2SK3018-T106 N-CHANNEL MOSFET
Q207 0TRRH80042A FET 2SK3018-T106 N-CHANNEL MOSFET
Q601 0TRRH80042A FET 2SK3018-T106 N-CHANNEL MOSFET
Q6Y1 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q702 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q702 0TRON80009A TR,Bipolar BC846ALT1 NPN 6V 80V 65V 100MA
Q702 0TRAU80017A TR,Bipolar 2SC5343SG NPN 5V 60V 50V 150MA
Q703 0TR103709BB TR,Bipolar 2SA1037AK-Q PNP -6V -60V -50V
Q703 0TR150409AC TR,Bipolar KTA1504S-GR PNP -5V -50V -50V
Q703 0TRON80008A TR,Bipolar MSA1162YT1G PNP -7V -60V -50V
Q703 0TRAU80008A TR,Bipolar 2SA1980SY PNP -5V -50V -50V -0
Q705 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q705 0TRON80009A TR,Bipolar BC846ALT1 NPN 6V 80V 65V 100MA
Q705 0TRAU80017A TR,Bipolar 2SC5343SG NPN 5V 60V 50V 150MA
Q706 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q706 0TRON80009A TR,Bipolar BC846ALT1 NPN 6V 80V 65V 100MA
Q706 0TRAU80017A TR,Bipolar 2SC5343SG NPN 5V 60V 50V 150MA
Q707 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q707 0TRON80009A TR,Bipolar BC846ALT1 NPN 6V 80V 65V 100MA
Q707 0TRAU80017A TR,Bipolar 2SC5343SG NPN 5V 60V 50V 150MA
Q708 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q708 0TRON80009A TR,Bipolar BC846ALT1 NPN 6V 80V 65V 100MA
Q708 0TRAU80017A TR,Bipolar 2SC5343SG NPN 5V 60V 50V 150MA
Q709 0TR387509AC TR,Bipolar KTC3875S-GR(ALG) NPN 5V 60V 50
Q709 0TRON80009A TR,Bipolar BC846ALT1 NPN 6V 80V 65V 100MA
Q709 0TRAU80017A TR,Bipolar 2SC5343SG NPN 5V 60V 50V 150MA
Q711 0TR103709BB TR,Bipolar 2SA1037AK-Q PNP -6V -60V -50V
Q711 0TR150409AC TR,Bipolar KTA1504S-GR PNP -5V -50V -50V
Q711 0TRON80008A TR,Bipolar MSA1162YT1G PNP -7V -60V -50V
Q711 0TRAU80008A TR,Bipolar 2SA1980SY PNP -5V -50V -50V -0
R201 0RH0471C622 Resistor,Chip MCR03EZPJ4R7 4.7OHM 5% 1/10W 1
R202 0RH0471C622 Resistor,Chip MCR03EZPJ4R7 4.7OHM 5% 1/10W 1
R203 0RH5100C422 Resistor,Chip MCR03EZPF511 510OHM 1% 1/10W 1
R204 0RH1001C422 Resistor,Chip MCR03EZPF102 1KOHM 1% 1/10W 16
R205 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R206 0RH1003C622 Resistor,Chip MCR03EZPJ104 100KOHM 5% 1/10W
R208 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R209 0RH1003C622 Resistor,Chip MCR03EZPJ104 100KOHM 5% 1/10W
R210 0RH0101D622 Resistor,Chip MCR10EZHJ1R0 1OHM 5% 1/8W 2012
R211 0RJ7503C677 Resistor,Chip MCR03EZPJ754 750KOHM 5% 1/10W
R212 0RH3903C622 Resistor,Chip MCR03EZPJ394 390KOHM 5% 1/10W

5 - 8
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
R213 0RH3903C622 Resistor,Chip MCR03EZPJ394 390KOHM 5% 1/10W
R214 0RJ7503C677 Resistor,Chip MCR03EZPJ754 750KOHM 5% 1/10W
R220 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R221 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R222 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R223 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R243 0RH2201C622 Resistor,Chip MCR03EZPJ222 2.2KOHM 5% 1/10W
R245 0RH2701C622 Resistor,Chip MCR03EZPJ272 2.7KOHM 5% 1/10W
R269 0RH3301C622 Resistor,Chip MCR03EZPJ332 3.3KOHM 5% 1/10W
R601 0RH5101C622 Resistor,Chip MCR03EZPJ512 5.1KOHM 5% 1/10W
R602 0RH2701C422 Resistor,Chip MCR03EZPF272 2.7KOHM 1% 1/10W
R603 0RH2702C622 Resistor,Chip MCR03EZPJ273 27KOHM 5% 1/10W 1
R605 0RH2201C622 Resistor,Chip MCR03EZPJ222 2.2KOHM 5% 1/10W
R607 0RJ7503C677 Resistor,Chip MCR03EZPJ754 750KOHM 5% 1/10W
R608 0RH1003C622 Resistor,Chip MCR03EZPJ104 100KOHM 5% 1/10W
R610 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R612 0RH5600C622 Resistor,Chip MCR03EZPJ561 560OHM 5% 1/10W 1
R613 0RH2202C622 Resistor,Chip MCR03EZPJ223 22KOHM 5% 1/10W 1
R614 0RH4701C622 Resistor,Chip MCR03EZPJ472 4.7KOHM 5% 1/10W
R620 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R621 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R622 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R624 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R625 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R627 0RH1502C622 Resistor,Chip MCR03EZPJ153 15KOHM 5% 1/10W 1
R628 0RH5602C622 Resistor,Chip MCR03EZPJ563 56KOHM 5% 1/10W 1
R629 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R630 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R631 0RH4701C622 Resistor,Chip MCR03EZPJ472 4.7KOHM 5% 1/10W
R632 0RH4701C622 Resistor,Chip MCR03EZPJ472 4.7KOHM 5% 1/10W
R633 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R638 0RH0681C622 Resistor,Chip MCR03EZPJ6R8 6.8OHM 5% 1/10W 1
R641 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R646 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R651 0RH2200C622 Resistor,Chip MCR03EZPJ221 220OHM 5% 1/10W 1
R652 0RH0562C622 Resistor,Chip MCR03EZPJ560 56OHM 5% 1/10W 16
R653 0RH2200C622 Resistor,Chip MCR03EZPJ221 220OHM 5% 1/10W 1
R654 0RH3300C622 Resistor,Chip MCR03EZPJ331 330OHM 5% 1/10W 1
R655 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R656 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R666 0RH1003C622 Resistor,Chip MCR03EZPJ104 100KOHM 5% 1/10W
R667 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R669 0RH0332C622 Resistor,Chip MCR03EZPJ330 33OHM 5% 1/10W 16
R670 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R696 0RH2201C622 Resistor,Chip MCR03EZPJ222 2.2KOHM 5% 1/10W
R697 0RH2201C622 Resistor,Chip MCR03EZPJ222 2.2KOHM 5% 1/10W
R698 0RH2201C622 Resistor,Chip MCR03EZPJ222 2.2KOHM 5% 1/10W
R6Y1 0RH2201C622 Resistor,Chip MCR03EZPJ222 2.2KOHM 5% 1/10W
R6Y2 0RH1501C622 Resistor,Chip MCR03EZPJ152 1.5KOHM 5% 1/10W
R6Y3 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R6Y4 0RH1001C622 Resistor,Chip MCR03EZPJ102 1KOHM 5% 1/10W 16
R6Y5 0RH1002C622 Resistor,Chip MCR03EZPJ103 10KOHM 5% 1/10W 1
R6Y6 0RH3301C622 Resistor,Chip MCR03EZPJ332 3.3KOHM 5% 1/10W
R6Y7 0RH1502C622 Resistor,Chip MCR03EZPJ153 15KOHM 5% 1/10W 1
R701 0RH1000C622 Resistor,Chip MCR03EZPJ101 100OHM 5% 1/10W 1
R702 0RH1000C622 Resistor,Chip MCR03EZPJ101 100OHM 5% 1/10W 1
R703 0RH1100C622 Resistor,Chip MCR03EZPJ111 110OHM 5% 1/10W 1

5 - 9
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
R704 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R705 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R706 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R707 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R708 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R709 0RH0752C622 Resistor,Chip MCR03EZPJ750 75OHM 5% 1/10W 16
R715 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R716 0RH1003C622 Resistor,Chip MCR03EZPJ104 100KOHM 5% 1/10W
R718 0RH1003C622 Resistor,Chip MCR03EZPJ104 100KOHM 5% 1/10W
R720 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R721 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R722 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R727 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R728 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R729 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R730 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R743 0RH2202C622 Resistor,Chip MCR03EZPJ223 22KOHM 5% 1/10W 1
R744 0RH5101C622 Resistor,Chip MCR03EZPJ512 5.1KOHM 5% 1/10W
R746 0RH1001C622 Resistor,Chip MCR03EZPJ102 1KOHM 5% 1/10W 16
R747 0RH0102C622 Resistor,Chip MCR03EZPJ100 10OHM 5% 1/10W 16
R748 0RH5601C622 Resistor,Chip MCR03EZPJ562 5.6KOHM 5% 1/10W
R749 0RH5101C622 Resistor,Chip MCR03EZPJ512 5.1KOHM 5% 1/10W
R750 0RH1001C622 Resistor,Chip MCR03EZPJ102 1KOHM 5% 1/10W 16
R751 0RH7501C622 Resistor,Chip MCR03EZPJ752 7.5KOHM 5% 1/10W
R752 0RH4701C622 Resistor,Chip MCR03EZPJ472 4.7KOHM 5% 1/10W
R753 0RH1001C622 Resistor,Chip MCR03EZPJ102 1KOHM 5% 1/10W 16
R762 0RH7501C622 Resistor,Chip MCR03EZPJ752 7.5KOHM 5% 1/10W
R763 0RH2202C622 Resistor,Chip MCR03EZPJ223 22KOHM 5% 1/10W 1
R764 0RH3300C622 Resistor,Chip MCR03EZPJ331 330OHM 5% 1/10W 1
R765 0RH3300C622 Resistor,Chip MCR03EZPJ331 330OHM 5% 1/10W 1
R766 0RH1001C622 Resistor,Chip MCR03EZPJ102 1KOHM 5% 1/10W 16
R769 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R770 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R771 0RH0222C622 Resistor,Chip MCR03EZPJ220 22OHM 5% 1/10W 16
R774 0RH1801C622 Resistor,Chip MCR03EZPJ182 1.8KOHM 5% 1/10W
R775 0RH1801C622 Resistor,Chip MCR03EZPJ182 1.8KOHM 5% 1/10W
R776 0RH1001C622 Resistor,Chip MCR03EZPJ102 1KOHM 5% 1/10W 16
R786 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R787 EBC40167001 Wire Pad WIRE PAD WIRE PAD 1 ALMIT
R788 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R789 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R790 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R791 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R792 0RH0752C422 Resistor,Chip MCR03EZPF750 75OHM 1% 1/10W 16
R793 0RH2200C622 Resistor,Chip MCR03EZPJ221 220OHM 5% 1/10W 1
R794 0RH2200C622 Resistor,Chip MCR03EZPJ221 220OHM 5% 1/10W 1
R795 0RH3301C622 Resistor,Chip MCR03EZPJ332 3.3KOHM 5% 1/10W
R796 0RH1001C622 Resistor,Chip MCR03EZPJ102 1KOHM 5% 1/10W 16
RN701 EBC41813701 Resistor,Array MNR14E0APJ4R7 4.7OHM 5% 1/16W
RN702 EBC41813701 Resistor,Array MNR14E0APJ4R7 4.7OHM 5% 1/16W
CN601 6630R-FB10L Connector,FFC/FPC/PIC 00-6232-012-006-800 12P 1.00MM
CN602 561-711J Connector,Wafer GIL-S-10P-S2T2-EF 10P 2.00MM 1
CN611 561-711D Connector,Wafer GIL-S-04P-S2T2-EF 4P 2.00MM 1R
CN6Y1 561-711B Connector,Wafer GIL-S-02P-S2T2-EF 2P 2.00MM 1R
JK701 6612K00003D Jack,Fiber Optic JST1164 3P TX 2.54MM ANGLE 13.
JK702 EAG41396503 Jack,RCA RCA-707AG-00-01 15.0MM 2RX4C A
JK705 EAG40562101 Connector,DSUB HMR24-AK5F10 HDMI 19P 1.5MM AN

5 - 10
S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS
X601 6212AA2270G Crystal HC-49/S 27MHZ 20PPM (SOUTH STA
IC602A SAA33179508 S/W,Firmware NAD_DV_NV80F72E402MS.ROM DVD-P
*** Frame Assembly ***
A44 ADV32453214 Frame Assembly DVD DV302H-NE(MTK1389S) CHASSI
260 MBS32047605 Chassis PRESS SECC 0.6 DV302H-NN(NAD) NSP
261 MCQ32325001 Damper CUTTING RUBBER DVD 07 DVD PLAY
261A MEG42830301 Holder MOLD ABS HF-380 DVD DV300-N MO
261B MEG42830401 Holder MOLD ABS HF-380 DVD DV300-N MO
262 MAZ32047801 Bracket PRESS SECC 1.0 DVD DV290 PRESS
320 MGC35824114 Panel,Rear PRESS SECC 0.6 DVD DV302H-NE E
462 1SZZR-0098J Screw,Customized 1SZZ0098J BH + 3MM 6.5MM MSWR
467 1SZZR-0097N Screw,Customized - + 3MM 8MM MSWR FZB SIN JIN
*** PCB Assembly(SCART & USB) ***
A41 EBR50660002 PCB Assembly 08 DVD-P NAD SCART&IR _
C305 0CE477CC618 Capacitor,AL,Radial SMS5.0TP6.3VB470M 470uF 20% 6.
C306 0CE477CC618 Capacitor,AL,Radial SMS5.0TP6.3VB470M 470uF 20% 6.
C307 0CE477CC618 Capacitor,AL,Radial SMS5.0TP6.3VB470M 470uF 20% 6.
CABLE2 EAD35665101 Cable,FFC AT10012060C03 60MM 1.00MM 12P
CN801 EAD42070202 Harness,Single 4P-70MM SHIELD (DV398) GIL-S 9
F301 0LA0101K018 Inductor,Wire Wound,Axial LAL02TA1R0K 1UH 10% - 270MA 0.
F302 0LA0101K018 Inductor,Wire Wound,Axial LAL02TA1R0K 1UH 10% - 270MA 0.
F303 0LA0101K018 Inductor,Wire Wound,Axial LAL02TA1R0K 1UH 10% - 270MA 0.
JK301 6612M00003B Jack,Scart RGB-16B 21P 21P/1C 3.81MM ANGL
JK302 6612F00007A Jack,Phone PJ-308-01 1P 2P ANGLE TR 3.6MM
JK803 EAG35130502 Connector,USB U250FD004S113BY A 1P 2.00/2.50
L301 0LR0102J025 Inductor,Wire Wound,Radial EL0405RA-100J-3 10UH 5% 0V 353
L302 0LR0102J025 Inductor,Wire Wound,Radial EL0405RA-100J-3 10UH 5% 0V 353
P3701 6630R-FB10L Connector,FFC/FPC/PIC 00-6232-012-006-800 12P 1.00MM
P3702 6631R-E108M Harness,Single 2P-180MM GIL-S 9073ST 180MM 2.
Q301 0TR120309AE TR,Bipolar SRC1203 NPN 40V - 50V 100MA 50
Q301 0TR103009AE TR,Bipolar KRC103M(KRC1203) NPN 40V 1V 50 ALTERNATE
R301 0RD2200F608 Resistor,Carbon Film RD-96S1J220R 220OHM 5% 1/6W 3.
R302 0RD2200F608 Resistor,Carbon Film RD-96S1J220R 220OHM 5% 1/6W 3.
R303 0RD1003F608 Resistor,Carbon Film RD-96S1J100K 100KOHM 5% 1/6W 3
R304 0RD1003F608 Resistor,Carbon Film RD-96S1J100K 100KOHM 5% 1/6W 3
R305 0RD0752F608 Resistor,Carbon Film RD-96S1J75R0 75OHM 5% 1/6W 3.2
R306 0RD1003F608 Resistor,Carbon Film RD-96S1J100K 100KOHM 5% 1/6W 3
R307 0RD1001F608 Resistor,Carbon Film RD-96S1J1K00 1KOHM 5% 1/6W 3.2
R308 0RD1001F608 Resistor,Carbon Film RD-96S1J1K00 1KOHM 5% 1/6W 3.2

5 - 11