Scribd
Upload
132 views3 pages

95 1270 01 Xiameter RBB 2881 30 Silicone Rubber

Uploaded by

productvtr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views3 pages

95 1270 01 Xiameter RBB 2881 30 Silicone Rubber

Uploaded by

productvtr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Technical Data Sheet

XIAMETER™ RBB-2881-30 Silicone Rubber

A silicone rubber designed for use in a variety of molded goods

Features &  30 Shore A hardness


Benefits  Translucency
 Pigmentable
 Suitable for molding process
 Suitable for food contact

Applications  General molded rubber parts such as keypad, gasket, packing and others

Typical Properties
Specification Writers: These values are not intended for use in preparing specifications.

ASTM1 Property Unit Result2


Appearance Translucent
D926 Plasticity mm/100 190
D792 Specific gravity 1.11
D2240 Hardness, Shore A 32
D412 Tensile strength MPa 8.0
D412 Elongation % 700
D624 Tear strength, angle KN/m 20

1. ASTM: American Society for Testing and Materials.


2. Properties obtained using 0.7 part SILASTIC™ RC-4 50P FD Rubber Additive (2,5-bis (tert-butylperoxy)-2,5-dimethyl
hexane) on 2 mm thick slabs: molded 10 minutes at 170°C and post-cured 4 hours at 200°C

Description XIAMETER™ RBB-2881-30 Silicone Rubber is a 30 durometer silicone rubber compound


especially designed to provide good results when making molded parts. It can be blended
with other XIAMETER™ silicone rubbers to obtain intermediate hardness. It is translucent,
and therefore can be easily pigmented to obtain most any color shade desired.
XIAMETER™ RBB-2881-30 Silicone Rubber is primarily used for molded parts such as
keypad, gasket, and other miscellaneous goods. It is also suitable for food contact
applications when properly cured and cleansed, among others, in accordance with the
requirements of FDA regulations.

®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow

XIAMETER™ RBB-2881-30 Silicone Rubber


Page 1 of 3 © 2020 The Dow Chemical Company. All rights reserved. Form No. 95-1270-01-1020 S2D
How to Use For blending or pigmenting, milling with two-roll mill is the most suitable process. Milling time
should be carefully decided to secure uniformity of materials. When molding 0.6 to 1.0 part
of SILASTIC™ RC-4 50P FD Rubber Additive to 100 parts of the stock is recommended.
Standard curing temperature is 170°C (338°F), and its cure time depends on the thickness
of final products. Post cure condition would be 4 hours at 200°C (392°F), after molding in
most cases.

Food Contact The components of XIAMETER™ RBB-2881-30 Silicone Rubber are listed in 21
CFR177.2600. This FDA regulation deals with rubber articles intended for repeated use in
contact with food. The regulation contains limitations on extractables which apply to the
finished fabricated articles. For this reason, compliance with such limitations is the
responsibility of the user. This is FDA regulation is valid for US only, local regulatory
requirements should be taken into consideration for Asia.

Handling PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN
Precautions THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS
AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD
INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE ON THE DOW WEBSITE AT
DOW.COM, OR FROM YOUR DOW SALES APPLICATION ENGINEER, OR
DISTRIBUTOR, OR BY CALLING DOW CUSTOMER SERVICE.

Usable Life and When stored at or below 50°C (122°F) in the original unopened containers, this product has
Storage a usable life of 9 months from the date of production.

Limitations This product is neither tested nor represented as suitable for medical or pharmaceutical
uses.

Health and To support customers in their product safety needs, Dow has an extensive Product
Environmental Stewardship organization and a team of product safety and regulatory compliance
specialists available in each area.
Information
For further information, please see our website, dow.com or consult your local Dow
representative.

Disposal Dispose in accordance with all local, state (provincial) and federal regulations. Empty
Considerations containers may contain hazardous residues. This material and its container must be
disposed in a safe and legal manner.

It is the user’s responsibility to verify that treatment and disposal procedures comply with
local, state (provincial) and federal regulations. Contact your Dow Technical Representative
for more information.

Product Dow has a fundamental concern for all who make, distribute, and use its products, and for
Stewardship the environment in which we live. This concern is the basis for our product stewardship
philosophy by which we assess the safety, health, and environmental information on our
products and then take appropriate steps to protect employee and public health and our
environment. The success of our product stewardship program rests with each and every
individual involved with Dow products - from the initial concept and research, to
manufacture, use, sale, disposal, and recycle of each product.

®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow

XIAMETER™ RBB-2881-30 Silicone Rubber


Page 2 of 3 © 2020 The Dow Chemical Company. All rights reserved. Form No. 95-1270-01-1020 S2D
Customer Notice Dow strongly encourages its customers to review both their manufacturing processes and
their applications of Dow products from the standpoint of human health and environmental
quality to ensure that Dow products are not used in ways for which they are not intended or
tested. Dow personnel are available to answer your questions and to provide reasonable
technical support. Dow product literature, including safety data sheets, should be consulted
prior to use of Dow products. Current safety data sheets are available from Dow.

dow.com NOTICE: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and
applicable laws may differ from one location to another and may change with time, Customer is responsible for determining
whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's
workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown
in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made
may not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document.
References to "Dow" or the "Company" mean the Dow legal entity selling the products to Customer unless otherwise expressly
noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

Page 3 of 3 ®Trademark of The Dow Chemical Company Form No. 95-1270-01-1020 S2D

You might also like