WTE

POWER SEMICONDUCTORS
S30D30C – S30D60C Pb

30A DUAL SCHOTTKY BARRIER RECTIFIER

Features
! Schottky Barrier Chip H
! Guard Ring for Transient Protection TO-3P
! Low Forward Voltage Drop Dim Min Max
! Low Reverse Leakage Current S J A 3.20 3.50
! High Surge Current Capability B 4.70 5.30
C — 23.00
! Plastic Material has UL Flammability R K 19.00 —
D
Classification 94V-O PIN1 2 3
E 2.80 3.20













































L P G 0.45 0.85
H — 16.20
J 1.70 2.70
Mechanical Data N K 3.15 Ø 3.65 Ø
L — 4.50
! Case: TO-3P, Molded Plastic M 5.25 5.65
! Terminals: Plated Leads Solderable per M N 1.10 1.40
MIL-STD-750, Method 2026 A P — 2.50
! Polarity: See Diagram B R 11.70 12.70
S 5.00 6.00
! Weight: 5.6 grams (approx.) All Dimensions in mm
! Mounting Position: Any
! Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. C
! Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
PIN 1 - +

G D PIN 3 - Case, PIN 2

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified

Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

S30D S30D S30D S30D S30D S30D

Characteristic Symbol Unit
30C 35C 40C 45C 50C 60C
Peak Repetitive Reverse Voltage VRRM
Working Peak Reverse Voltage VRWM 30 35 40 45 50 60 V
DC Blocking Voltage VR

RMS Reverse Voltage VR(RMS) 21 25 28 32 35 42 V

Average Rectified Output Current @TC = 95°C IO 30 A

Non-Repetitive Peak Forward Surge Current 8.3ms

Single half sine-wave superimposed on rated load IFSM 275 A
(JEDEC Method)

Forward Voltage @IF = 15A VFM 0.55 0.65 V

Peak Reverse Current @TA = 25°C 1.0

IRM mA
At Rated DC Blocking Voltage @TA = 100°C 60

Typical Junction Capacitance (Note 1) Cj 1100 pF

Typical Thermal Resistance Junction to Case (Note 2) R
JC 1.4 °C/W

Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C

Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistance junction to case mounted on heatsink.

S30D30C – S30D60C 1 of 4 © 2006 Won-Top Electronics

 30 100

IF, INSTANTANEOUS FORWARD CURRENT (A)

I(AV), AVERAGE RECTIFIED CURRENT (A)
S30D30C - S30D45C

24

10
18
S30D50C - S30D60C

12
1.0

6
Tj = 25°C
Pulse width = 300 µs
2% duty cycle
0 0.1
0 50 100 150 0.2 0.4 0.6 0.8
TC, CASE TEMPERATURE (°C) VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 1 Forward Derating Curve Fig. 2 Typical Fwd Characteristics per Element

300 4000
IFSM, PEAK FORWARD SURGE CURRENT (A)

8.3 ms single half-sine-wave Tj = 25°C

JEDEC method Cj, JUNCTION CAPACITANCE (pF) f = 1MHz

250

200
1000

150

100

50

100
0
1 10 100 0.1 1.0 10 100
NUMBER OF CYCLES AT 60 Hz VR, REVERSE VOLTAGE (V)
Fig. 3 Max Non-Repetitive Peak Fwd Surge Current Fig. 4 Typical Junction Capacitance per Element

100
IR, INSTANTANEOUS REVERSE CURRENT (A)

TC = 100°C

10

TC = 75°C

1.0

TC = 25°C
0.1

0.01
0 40 80 120
PERCENT OF PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics per Element

S30D30C – S30D60C 2 of 4 © 2006 Won-Top Electronics

MARKING INFORMATION

S30DxxC S30DxxC = Device Number

xx = 30, 35, 40, 45, 50 or 60
Polarity = As Marked on Body

PACKAGING INFORMATION

BULK

Tube Size Quantity Inner Box Size Quantity Carton Size Quantity Approx. Gross Weight
L x W x H (mm) (PCS) L x W x H (mm) (PCS) L x W x H (mm) (PCS) (KG)

505 x 46 x 6.5 30 520 x 145 x 95 1,200 540 x 306 x 115 2,400 18.0

Note: 1. Anti-static tube, water clear color.

RECOMMENDED SCREW MOUNTING ARRANGEMENT

Recommended isolated mounting when

screw is at heatsink potential. 6-32
6-32 HEX Head Screw
hardware is used.
Plain Washer
A conical washer should be used to
apply proper force to the device. Screw Rectifier
should not be tightened with any type of
Insulator
air-forced torque or equipment that may
cause high impact on device package. Heatsink

The interface should apply a layer of Conical Washer

thermal grease or a highly conductive 6-32 HEX Nut
thermal pad for better heat dissipation.

S30D30C – S30D60C 3 of 4 © 2006 Won-Top Electronics

 ORDERING INFORMATION

Product No. Package Type Shipping Quantity

S30D30C TO-3P 30 Units/Tube

S30D35C TO-3P 30 Units/Tube

S30D40C TO-3P 30 Units/Tube

S30D45C TO-3P 30 Units/Tube

S30D50C TO-3P 30 Units/Tube
S30D60C TO-3P 30 Units/Tube

1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to part number above. For example, S30D30C-LF.

Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.

WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.

Won-Top Electronics Co., Ltd.

No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410

We power your everyday.

Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com

S30D30C – S30D60C 4 of 4 © 2006 Won-Top Electronics