Class 9 Lines and Angles Notes
Class 9 Lines and Angles Notes
Line Segment
If a line has two ends, then it is called a line segment.
Ray
That part of the line with one endpoint is called a ray.
Non-Collinear Points
It is an essential concept of class 9 lines and angles, which says that collinear points are
present in a line having three or more points. Else, they are called non-collinear points. In
simpler terms, non- collinear points do not allow a single line to be formed through them.
In the aforementioned picture, no single line through points A, B, C is formed because they are
non-collinear, rather separate lines l,m,n can be seen.
Now let us have a look at the types of angles that we will be studying in this chapter.
Angle
When two rays originate from the same endpoint, it is called an Angle. Arms are the two rays
that make the base for an angle. The endpoints where the two rays meet is known as the
Vertex.
There are various types of angles, explained below are the important ones according to the
class 9 lines and angles chapter.
Acute Angle
All the angles that measure between the range of 0 to 90 degrees are called an acute angle.
Right Angle
As per the class 9 lines and angles chapter, an angle which measures exactly 90 degrees is
called a Right Angle.
Obtuse Angle
This is an angle greater than 90 degrees but smaller than 180 degrees.
The picture given below depicts a comparison between the 3 main types of angles.
Reflex Angle
A reflex angle is greater than 180 degrees but less than 360 degrees.
Complementary Angles
Two angles having a sum of 90 degrees are called complementary angles.
Supplementary Angles
It happens to be an important concept of class 9 lines and angles. Supplementary angles are
those angles which have some of 180 degrees.
Adjacent Angles
Two or more angles that have a common vertex are called adjacent angles.
Linear Pair Angles
It is a fundamental concept of this chapter and it says that if two non-common arms say, a and b
can form a line, they will be called line pair angles.
If there are two lines parallel to one another and have the same length of perpendicular on the
surface of the line, it is called the distance between two parallel lines. The vertically opposite
angle is an elementary concept of lines and angles.
Transversal Lines
A transversal line is one that intersects two or more lines at distinct points.
Axioms of Lines and Angles
For all of us to solve the questions of the lines and angles class 9, there are some axioms that
have been laid down. All the steps that are involved in the solution of a question must be in
accordance with these axioms.
The non-common arms of the angle will always form a line whenever the sum of two adjacent
angles is more than 180 degree.
When two lines are intersected by a transversal forming two corresponding angles in pairs, they
will be parallel to one another.
Consecutive Interiors
They are the angles that lie on the same transversal’s side. They are also called allied or
co-interior angles.
Theorem 1
When two lines that have a pair of alternate interior angles that are equal are intersected by a
transversal, then the two lines are always parallel.
Theorem 2
A pair of interior angles on the same transversal’s side on two parallel lines will be
supplementary whenever a transversal intersects.
Theorem 3
If two interior angles are formed on the same side of a transversal and are supplementary to
each other and have a transversal interesting the two parallel lines, then those two lines are
parallel.
Theorem 4
Sum of all the angles of the triangle is 180 degrees.
Theorem 5
The sum of two interior opposite angles of a triangle is always equal to the exterior angle of the
triangle.
Solution:
∴ b+a+∠POY= 180°
⇒ 5a/2 = 90°
⇒ a = (90/5)x 2= 36 = 36°
Example 2: In figure, POQ is a line. Ray OR is perpendicular to line PQ. OS is another ray lying
between rays OP and OR. Prove that: ∠ROS= 1/2 (∠QOS- ∠POS)
Solution 2:
∴ ∠ROQ = 90°
∴ ∠ROS = 1/2(∠QOS−∠POS
Example 3: In figure, find the values of x and y and then show that AB || CD.
or 50° + x = 180°
∴ AB || CD