Scribd
Upload
101 views

Sandvik Commissioning Report

Uploaded by

Karthii Aju
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
101 views

Sandvik Commissioning Report

Uploaded by

Karthii Aju
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SANDVIK MINING AND ROCK TECHNOLOGY

REGION ASIA

NEW ENGINE COMMISSIONING REPORT


M/C ATTAND BY: A. Subhajit Paul Page No1(1)
Reports Date: 16-06-2021

Machine Model TH330 Serial No. 4812


HMR 18 Hrs. Date of Commission 12-06-2021
Engine Model OM926LA Engine Serial No. 7008579447
Is Under Warranty Yes No Is Break Down Yes No
Customer MAHESHWARI MINING PVT.LTD. Machine Location CEW, RANIGANJ

Sr No Description OK NOT OK Remarks


1 Check Air filter (outer and inner) √
2 Check Air filter housing condition √
3 Condition of water hoses √
4 Condition of water hoses clamps √
5 Condition of CAC hoses √
6 Condition of CAC hoses clamps √
7 Clean air intake pipe. line √
8 Condition of air suction hoses and clamps √
9 Check vacuum indicator sensor √
10 Check radiator condition √
11 Check After cooler condition √
12 Check coolant level √
13 Check fuel tank strainer √
14 Clean fuel tank and use new fuel √
15 Condition of engine mounting pads √
16 Condition of fuel hoses √
17 Checked coolant level sensor √
18 Condition of Fan √
19 Condition of Battery √

Additional remarks

1. During first 50 hrs. maintenance, all fasteners to be checked.


2. Check the Coolant Level.

After starting Observation:

Sl No Description OK NOT OK Remarks


1 Close monitoring required on Engine oil pressure. √
2 After 5-10 minutes (idle running) run stop the engine and inspect √ No abnormal sound and smoke issues
engine Oil level and other leakage.
3 If ok, then start engine again with normal mode and record all √
parameter.
4 Eng. RPM idle 700 high idle rpm 2200 √ Good
Stall test
A = 2nd gear 2120 rpm, B =A + Dump box end rpm 2050C=
A+B + Steering rpm 1980
5 Eng. Oil Pressure in idle 2.8 Bar High idle 5.2 Bar stall RPM in √ Good
2ND Gear 4.8 Bar
6 Eng. Oil Temperature 90⁰C √
7 Eng. Coolant Temperature 82⁰C √
8 Boost Pressure in idle 0.0 Bar High idle 0.6 Bar Stall in (2nd Gear) 1.7 √ Good
bar
Remarks
** First 50 hours’ engine service will be done and take Alarm log from the machine.
START-UP INSPECTION
WARRANTY REGISTRATION
Loaders Page No2 (2)

Dump Trucks Sold Leased

Equipment model TH330 Serial number 4812

Customer MAHESHWARI MININIG PRIVATE LIMITED

Sales Company /
SANDVIK MINING AND ROCK TECHNOLOGY INDIA PVT.LTD
Distributor

Hour meter reading at


Tires 18.00
delivery
Sandvik Minng and Construction Oy Warranty Handler,Turku

This is to verify that I have received the machine in good and safe working condition, and I have been instructed in all items indicated and checked off in the
checklist above. Machine warranty begins from the date of signature.

Date ………………… Customer signature Representative Signature

Name in Block Letter

Mailing Address Street Address Telephone Telefax


Sandvik Mining and Construction Oy Sandvik Mining and Construction Oy +356 205 44 131 Marketing, Finance +358 205 44 130
Loaders Turku Loaders Turku Domicile Parts, Service +358 205 44 5355
P.O Box 434 Vahdontie 19 Tampere, Finland Procurement, Production +358 205 44 5465
FI-20101 Turku FI-20360 Turku Business ID R&D +358 205 44 5555
Finland Finland 02116007

You might also like